Typical Applications Base Stations Test Equipment Synthesizers. Frequency stabilities 1 [Standard]
|
|
|
- Jeffery Booker
- 5 years ago
- Views:
Transcription
![52; 156.25; 175 MHz Frequency stabilities 1 [Standard] Parameter Min Typ Max Units Operating temperature range vs. operating temperature range (Referenced to +25 C -10.0 +10.](/docs-images/96/128719484/images/1-1.jpg "0 ppm -20 +70 C Parameter Min Typ Max. Units Condition Initial tolerance -5.0 +5.0 ppm vs. supply voltage change -1.0 +1.0 ppm V S ± 5% vs. load change -1.0 +1.0 ppm Load ± 5% vs. aging /1. Year -3.")
1 PX-701 Clock Oscillator Features Reflow Process Compatible Surface Mount Package AT-Cut Crystal SONET Minimum Clock Specification Low Phase Noise Tight Tolerances Typical Applications Base Stations Test Equipment Synthesizers Previous Vectron Model Numbers Frequency Range Standard Frequencies C MHz 175 MHz ; ; ; ; ; 50; 76.8 MHz 77.76; 100; 125; 150; ; ; 175 MHz Frequency stabilities 1 [Standard] Parameter Min Typ Max Units Operating temperature range vs. operating temperature range (Referenced to +25 C ppm C Parameter Min Typ Max. Units Condition Initial tolerance ppm vs. supply voltage change ppm V S ± 5% vs. load change ppm Load ± 5% vs. aging /1. Year ppm vs. aging / year (followingyears ppm FX-701 page: 1/7
2 Frequency stabilities 1 [SC Cut Crystal-Option-10 to 52 MHz] Parameter Min Typ Max Units Operating temperature range vs. operating temperature range C Parameter Min Typ Max. Units Condition overall tolerance ppm ( 15 Years aging, temp, initial, supply, load Supply Voltage (Vs Supply voltage (Vs VDC Current consumption 40 HCMOS Current consumption 90 PECL Supply voltage (Vs VDC Current consumption 30 LVHCMOS Current consumption 80 LVPECL Current consumption 25 LVDS RF Output Signal HCMOS Load 15.0 pf Rise and Fall time 5 15 pf 10 to 90 % Duty cycle Vs/2 Signal PECL Load 50 Ω Vs - 2V Rise and Fall time 1 ns 20 to 80 % Duty cycle % Signal LVDS Load 100 Ω Rise and Fall time 1 ns 10 to 90 % Duty cycle % Additional Parameters Phase Noise -85 dbc/hz 10 MHz -120 dbc/hz 100 Hz HCMOS -145 dbc/hz 1 khz 3,3V -155 dbc/hz 10 khz -160 dbc/hz 100 khz Jitter 0,2 ps 12 khz to 20 MHz FX-701 page: 2/7
3 Additional Parameters Phase Noise -80 dbc/hz 10 MHz -108 dbc/hz 100 Hz PECL -134 dbc/hz 1 khz 3,3V -140 dbc/hz 10 khz -141 dbc/hz 100 khz Jitter 0,6 ps 12 khz to 20 MHz Phase Noise -80 dbc/hz 10 MHz -115 dbc/hz 100 Hz PECL -135 dbc/hz 1 khz 3,3V -141 dbc/hz 10 khz -141 dbc/hz 100 khz Jitter 0,6 ps 12 khz to 20 MHz Weight 2 g Processing & Packing handling&processing note Absolute Maximum Ratings Supply voltage (Vs 7 V Operable temperature range C Storage temperature range C FX-701 page: 3/7
4 Enclosure Type G241 < 53 MHz Type G251 > 1 MHz Height H Height H 2,3 mm 2,3 mm Dimensions: mm Dimensions: mm Pin Connections 1 N/C 1 N/C Pin Connections 2 N/C / Enable (optional 2 N/C / Enable (optional 3 Ground 3 Ground 4 RF Output 4 RF Output 5 N/C 5 Complementary RF Output / (N/C: HCMOS only 6 Supply Voltage Input (Vs 6 Supply Voltage Input (Vs true table HCMOS LVPECL + LVDS Pin 2 Pin 4 Pin 5 Pin 4 Pin 5 High Data N/C No Data No Data Open Data N/C Data compl. Data Low High Tristate N/C Data compl. Data Marking PX-701 Frequency AYYWW FX-701 page: 4/7
5 Typical Phase Noise and Jitter 49,408 MHz; HCMOS output 89,6 MHz; PECL output Frequency range [Hz] Jitter [ps rms] Frequency range [Hz] Jitter [ps rms] 12kHz to 20MHz 0.188ps 12kHz to 20MHz 1.002ps 125 MHz; PECL output Typical frequency stability vs temperature Frequency range [Hz] 12kHz to 20MHz Jitter [ps rms] 0.608ps FX-701 page: 5/7
6 Standard Shipping Methode A Lage im Gurt Position in tape Pin 1 Abwickelrichtung Unwinding direction X P K B *bei W 24 mm nur untere Lochreihe by W 24 mm only lower hole line Production tolerance complying DIN IEC Gurtoberseite Tape upper side Gurtunterseite Tape buttom side Enclosure Type Tape width W [mm] Quantity per meter Quantity per reel Dimension P G218B / G223B 24 83, Recommanded Reflow Profile Profile Feature Pb-Free Assembly/ Sn-Pb Assembly Profile Feature Pb-Free Assembly/ Sn-Pb Assembly Average ramp-up rate (T L to T p 3 C/second max. Time 25 C to Peak Temperature 8 minutes max. Preheat -Temperature Min T smin -Temperature Min Ts max -Time (min to max (ts 150 C 200 C seconds Time maintainted above -Temperature (T L -Time (t L 217 C seconds T Smax to T L -Ramp-up Rate 3 C/second max Time maintainted above -Temperature (T L -Time (t L 217 C seconds Time within 5 C of actual Peak Temperature (t P seconds Peak Temperature (T P max 260 C Ramp-down Rate 6 C/ second max Note: All temperatures refer to topside of the package, measured on the package body surface. SMD oscillators must be on the top side of the PCB during the reflow pocess. FX-701 page: 6/7
7 How to order this product: Model Height - Use this worksheet to forward the following information to your factory representative : Supply Voltage Code RF Output Code Temperature Range - Stability X - Frequency PX D A J X - 10MHz Height: 0: 2,3 mm Supply Voltage Code: E: 3,3 V D: 5 V RF Output Code: A: HCMOS C: PECL D: LVDS Temperature Range/ Stability Code: J-105: C ±10ppm J-205: C ±20ppm over all Notes: 1 Contact factory for improved stabilities or additional product options. Not all options and codes are available at all frequencies. 2 Unless otherwise stated all values are valid after warm-up time and refer to typical conditions for supply voltage, frequency control voltage, load, temperature (25 C 3 Phase noise degrades with increasing output frequency. 4 Subject to technical modification. 5 Contact factory for availability. FX-701 page: 7/7
C5310. Tight Stability. 1 MHz 700 MHz
Typical Applications Base Stations Test Equipment Switching Portable Equipment Frequency range Standard frequencies Features Surface Mount Package Reflow Process Compatible AT-Cut Crystal Low Phase Noise
VX-706 Voltage Controlled Crystal Oscillator
VX-706 Voltage Controlled Crystal Oscillator VX-706 Features AT-Cut Crystal Surface Mount FR4 based package Single layer Reflow Process Compatible Low & Jitter Tight Stabilities Frequency Range 40-300MHz
VX-701 Voltage Controlled Crystal Oscillator
VX-701 Voltage Controlled Crystal Oscillator VX-701 Features AT-Cut Crystal Surface Mount FR4 based package Reflow Process Compatible Low Tight Stabilities Frequency Range 16-200MHz Standard Frequencies
Additional parameters Parameter Min Typ Max. Units Condition Weight 1 g
Typical Applications Base Stations Test + Measurement Features Surface Mount Package Reflow Process Compatible Low Phase Noise Build in PLL-Circuit Output range Standard frequencies 1 MHz 185 MHz 1; 25;
VX-505 Voltage Controlled Crystal Oscillator Extended Temperature
VX-505 Voltage Controlled Crystal Oscillator Extended Temperature VX-505 Features AT-Cut Crystal Surface Mount FR4 based package Reflow Process Compatible Extended temperature range -55..+125 C Low Tight
Reflow Process Compatible Low Phase Noise Build in PLL-Circuit
Typical Applications Base Stations Features Surface Mount Package Reflow Process Compatible Low Phase Noise Build in PLL-Circuit Output Frequency range Standard frequencies 10 MHz 700 MHz 10; 25; 26; 39.3216;
C
Typical Applications Base Stations Test Equipment Synthesizers Digital Switching Features Surface Mount Package Optional Reflow Process Compatible Optional AT-Cut and SC-Cut Crystal Options Low Profile
C MHz 52 MHz
Typical Applications PCS Base Stations Land Mobile Radio Cellular Telephony Radio in the Local Loop Frequency range Standard frequencies Features EFC Standard Low Profile Small Size 100 % RoHS compliant
Performance Specifications
OX-280 Oven Controlled Crystal Oscillator OX-280 Features Surface Mount Package AT-CUT and SC_CUT Crystal Options Low Profile Compact Package Compact Package Applications Base stations Test equipment Synthesizers
TX-700 Temperature Compensated Crystal Oscillator
TX-700 Temperature Compensated Crystal Oscillator Features EFC Standard Small Size 0% RoHS Compliant Low Profile range of 6.4-52 MHz Standard Frequencies:, 12.8, 16.384, 19.44, 20, 20.48 MHz Applications
TX-500 Temperature Compensated Crystal Oscillator
TX-500 Temperature Compensated Crystal Oscillator TX-500 Features Low Phase Noise Low power consumption Output: HCMOS, Clipped Sinewave, PECL, True Sinewave Tight Tolerances Frequency range 1 of 6.4-160
Performance Specifications
TX-502 Temperature Compensated Crystal Oscillator High Precision TX-502 Features High Precision TCXO OCXO Replacement OCXO Temperature Performance Low power consumption Tight Tolerances Frequency range
VS-504 Dual Frequency VCSO High Frequency
VS-504 Dual Frequency VCSO High Frequency VS-504 The VS-504 dual frequency VCSO (Voltage Controlled Saw Oscillator from Vectron is a high frequency, ultra low phase noise oscillator designed to support
PS-701 SAW Oscillator
PS-701 SAW Oscillator PS-701 The PS-701 SO (Saw Oscillator from Vectron is a high frequency, ultra low phase noise oscillator designed to support high speed data converters and 100G / 400G coherent optical
VS-701 High Shock Discrete Voltage Controlled SAW Oscillator
VS-701 High Shock Discrete Voltage Controlled SAW Oscillator VS-701 The VS-701 VCSO (Voltage Controlled Saw Oscillator from Vectron is a high frequency, ultra low phase noise oscillator designed to support
VS-507 Voltage Controlled SAW Oscillator
VS-507 Voltage Controlled SAW Oscillator VS-507 Description The VS-507 VCSO (Voltage Controlled Saw Oscillator from Vectron is an ultra high frequency, ultra low phase noise oscillator. The VS-507 provides
OX-400 / OX 401 Oven Controlled Crystal Oscillator
OX-400 / OX 401 Oven Controlled Crystal Oscillator OX-400 / 401 Features 4-Pin Dip Fast warm-up TCXO replacement for better short term stability Frequency Range, 10 MHz to 40 MHz Standard frequencies,
MX-600 Microprocessor Controlled Crystal Oscillator High Precision
MX-600 Microprocessor Controlled Crystal Oscillator High Precision MX-600 Features Ultra High Stability MCXO Low Power Consumption Meets Stratum 3 acc. GR-1244 ROHS 6 Compliant Frequency Range 1 : 8-40
MX-503 Microprocessor Controlled Crystal Oscillator High Precision
MX-503 Microprocessor Controlled Crystal Oscillator High Precision MX-503 Features Ultra High Stability MCXO Low Power Consumption Meets Stratum 3 acc. GR-1244 ROHS 6 Compliant Frequency Range 1 : 8-50
OX-221 Oven Controlled Crystal Oscillator
OX-221 Oven Controlled Crystal Oscillator OX-221 Features Surface Mount package SC_CUT Crystal Low Profile Compact Package standard frequency: 1, 2, 3.72 MHz Applications Base stations Test equipment Synthesizers
MX-503 High Precision Microprocessor Controlled Crystal Oscillator
MX-503 High Precision Microprocessor Controlled Crystal Oscillator MX-503 Features Ultra High Stability MCXO Low Power Consumption Meets Stratum 3 acc. GR-1244 ROHS 6 Compliant Frequency Range 1 : 8-50
MD-403 I2C InterfaceOven Controlled Crystal Oscillator
MD-43 I2C InterfaceOven Controlled Crystal Oscillator MD-43 The MD-43 is a Vectron module that contains a medium size ovenized crystal oscillator and an I 2 C interface that communicates with an onboard
PX-421 Crystal Oscillator
PX-421 Crystal Oscillator PX-421 PX-421 PX-421 PX-421 Features Frequency: 10 KHz to 125 MHz 4 Pin 1/2 DIP Package with Through Hole and SMD lead optio Fully RoHS Compliant * No pure tin is used in this
MHz. Performance Specifications
VX-501-0276-245M76 Preliminary version: Subject to technical modification. VCXO VX-501-0276-245M76 Nominal frequency (f0) 245.76 MHz Performance Specifications Frequency stabilities vs. operating temp.
Performance Specifications. Frequency Stabilities 1 ( MHz) -20 to +70 C -40 to +85 C -40 to +95 C Residual error compare to fit curve
MD-403 I2C InterfaceOven Controlled Crystal Oscillator MD-403 The MD-403 is a Vectron module that contains a medium size ovenized crystal oscillator and an I 2 C interface that communicates with an onboard
XCO FAST TURNAROUND CLOCK OSCILLATOR HIGH FREQUENCY, LOW JITTER CLOCK OSCILLATOR FEATURES + DESCRIPTION SELECTOR GUIDE LVCMOS LVDS LVPECL
XCO FAST TURNAROUND DESCRIPTION FEATURES + The XCO clock series is a cutting edge family of low to high frequency, low jitter output, single or multi - frequency clock oscillators. The XCO clocks are available
PARAMETER SYMBOL CONDITIONS VALUE UNIT
Page 1 of 6 FEATURES APPLICATIONS ±0.28 ppm Holdover Stability Mobile Phones ±4.6 ppm accuracy over all conditions Base Stations including 20 years aging Mobile Radios Miniature 5x7 mm SMD GPS Devices
Performance Specifications. Frequency Stabilities 1 ( 10 & 20 MHz)
MD-223 I 2 C Interface Oven Controlled Crystal Oscillator Preleminary version MD-223 The MD-223 is a Vectron module that contains a medium size ovenized crystal oscillator and an I 2 C interface that communicates
HIGH FREQUENCY, LOW JITTER CLOCK OSCILLATOR
DESCRIPTION FEATURES + The XCO clock series is a cutting edge family of low to high frequency, low jitter output, single or multi - frequency clock oscillators. The XCO clocks are available in 7.0 x 5.0,
TX-705 Temperature Compensated Crystal Oscillator
TX-705 Temperature Compensated Crystal Oscillator TX-705 Features Applications The TX-705 is a TCXO family designed for applications where superior g-sensitivity and good phase noise together with small
VX-503 Voltage Controlled Crystal Oscillator
VX3 Voltage Controlled Crystal Oscillator VX3 Features Description The VX3 voltage controlled crystal oscillator expands VI s advanced VCXO performance capabilities while adhering to a package footprint
TX-801 Temperature Compensated Crystal Oscillator
TX-801 Temperature Compensated Crystal Oscillator TX-801 Features Applications The TX-801 TCXO provides fully compliant Stratum 3 levels of stability in a 5x3.2mm package. It is ideal for timing over IP
OX-200 Oven Controlled Crystal Oscillator
OX-200 Oven Controlled Crystal Oscillator OX-200 Features Reflow Process Compatible AT-Cut and SC-Cut Crystal Options Low Profile Compact Package Applications Base Stations Test Equipment Synthesizers
EX-421 Evacuated Miniature Crystal Oscillator
EX-421 Evacuated Miniature Crystal Oscillator EX-421 Description The EX-421 provides exceptionally low aging rates and tight temperature stabilities in an extremely small package over a wide range of environmental
Rakon Product Proposal
RS1490P XO `Tiger' SMD Clock Oscillator Series High Performance PLL Crystal Clock Oscillator. Product description This PLL XO offers ultra low RMS phase jitter and high frequency stability in an industry
TX-707 Low g-sensitivity Temperature Compensated Crystal Oscillator
TX-707 Low g-sensitivity Temperature Compensated Crystal Oscillator TX-707 The TX-707 Series TCXO combines innovative manufacturing and the latest technology to provide low phase noise and excellent g-sensitivity.
Preliminary. 2.0 FREQUENCY CHARACTERISTICS Line Parameter Test Condition Value Unit 2.1 Frequency 8 to 1500 MHz 2.2 Operating Temperature Range
RXO5032P SMD Clock Oscillator () High Performance XO in 5 x 3.2 mm Surface Mount package Product description The RXO5032P XO combines very low RMS phase jitter and tight frequency stability in a small
ClearClock Ultra-Low Jitter & Power Optimized 5.0 x 3.2 mm XO. (3): Stability over OTR. D: ±15ppm over -20 C to +70 C F: ±20ppm over -40 C to +85 C
Features Ultra-Low Jitter: 125 fs Typ RMS (200fs MAX, F>250MHz); spurs included Available with any frequency from 50MHz to 2100MHz Factory programmable; samples available within 1-2 week lead times Lowest
CLEARCLOCK POWER OPTIMIZED 0.12ps 5x7mm XO
FEATURES APPLICATIONS 0.125ps typ jitter (150fs MAX f > 200MHz, 25 C) Highest in-class frequency range from 50 to 2100MHz Excellent spurious suppresion 70mA MAX IDD (, any VDD) Lowest in-class power consumption
Model 653 Very Low Jitter LVPECL or LVDS Clock
Features Ceramic Surface Mount Package Very Low Phase Jitter Performance, 500fs Maximum Fundamental or 3 rd Overtone Crystal Design Frequency Range 10 320MHz * +2.5V or +3.3V Operation Output Enable Standard
Performance Specifications
OX-208 Oven Controlled Crystal Oscillator OX-208 OX-208 The OX-208 is a high stability ovenized crystal oscillator in a 25 x 25 mm package, capable of aging rates of 0.15 /day and temperature stabilities
Ultra Low Jitter LVPECL or LVDS Clock
Features Ceramic Surface Mount Package Ultra Low Phase Jitter Performance, 100fs Typical Fundamental or 3 rd Overtone Crystal Design Frequency Range 80 170MHz * +2.5V or +3.3V Operation Output Enable Standard
Logic & Supply Voltage: HC = HCMOS +5V L = LVHCMOS +3.3V P = LVPECL +3.3V
Description Q-Tech s surface-mount QTCV576 VCXOs consist of an IC 5Vdc,.Vdc clock square wave generator and a miniature strip AT quartz crystal built in a low profile ceramic package with gold plated contact
Model 633 Very Low Jitter LVPECL or LVDS Clock
Features Ceramic Surface Mount Package Very Low Phase Jitter Performance, 500fs Maximum Fundamental or 3 rd Overtone Crystal Design Frequency Range 10 220MHz * +2.5V or +3.3V Operation Output Enable Standard
Typical Applications Satellite and Deep Space Radiation Tolerance Required Severe Environmental Conditions. 10 MHz 40 MHz 10, 20 MHz
EX-209 Hi-Reliability Evacuated Miniature Crystal Oscillator EX-209 Features 16 pin Double Dip Package Ruggedized hybrid thick film construction Low Power Consumption Legacy Model: EX-245 Typical Applications
Logic & Supply Voltage: HC = HCMOS +5V L = LVHCMOS +3.3V P = LVPECL +3.3V
. and 5.0Vdc -.000MHz to 56.2MHz Description Q-Tech s surface-mount QTCV56 VCXOs consist of an IC 5Vdc,.Vdc clock square wave generator and a miniature strip AT quartz crystal built in a low profile ceramic
OX-171 Oven Controlled Crystal Oscillator
OX-171 Oven Controlled Crystal Oscillator OX-171 The OX-171 is a high stability ovenized crystal oscillator in a 28 x 38 mm package, capable of aging rates of 0.06 /day and temperature stabilities of 1
Dynamic Engineers Inc.
Features and Benefits Standard and custom frequencies up to 2100 MHz Femto-second (f sec.) RMS phase jitter Short lead time Typical Applications Low noise synthesizer VCO reference Optical Communication
Preliminary Rev. M Accusilicon AS318-B Series Professional Audiophile Crystal Oscillator
Accusilicon AS318-B Series Professional Audiophile Crystal Oscillator Features Extremely low close-in phase noise, designed for professional Audiophile & Recording application. Typical -100dBc @ 10Hz at
ELECTRICAL SPECIFICATIONS PARAMETER SYMBOL CONDITION VALUE UNIT. Supply Voltage Vs Vs=+1.8V±5% is only for CML V
MEMS Differential Page 1 of 8 1 to 220 MHz High Performance LVPECL/ HCSL / LVDS / CML output High frequency stability SMD package 7.0 x 5.0 mm ELECTRICAL SPECIFICATIONS PARAMETER SYMBOL CONDITION VALUE
DS4-XO Series Crystal Oscillators DS4125 DS4776
Rev 2; 6/08 DS4-XO Series Crystal Oscillators General Description The DS4125, DS4150, DS4155, DS4156, DS4160, DS4250, DS4300, DS4311, DS4312, DS4622, and DS4776 ceramic surface-mount crystal oscillators
Model 356P/L Advanced PLL LVPECL or LVDS VCXO
Features Ceramic Surface Mount Package Low Phase Jitter Performance, 500fs Typical Advanced PLL Design w/ Low Fundamental Crystal Frequency Range 10MHz 800MHz * +2.5V or +3.3V Operation Output Enable Standard
Ultra Low Phase Noise XO / VCXO
FEATURES: High "Q", 3rd Overtone Crystal Technology Ultra Low Phase Noise -162 Typ. @ 10k, 100MHz carrier Standard LVCMOS RF Output Wide Operating Temperature (-40ºC to +85ºC) standard ±28 ppm Max. All
MD-173 High Stability Coefficient Oscillator I C interface Oven Controlled Crystal Oscillator
MD-173 High Stability Coefficient Oscillator I C interface Oven Controlled Crystal Oscillator 2 MD-173 The MD-173 is a Microsemi Coefficient Oscillator (CCXO) that contains a high-stability ovenized crystal
3.000 MHz MHz. Cat. No.
LOW-PROFILE MICROPROCESSOR CRYSTALS LEADED VERSION MICROPROCESSOR CRYSTALS SPECIFICATIONS Nominal Frequency Frequency Tolerance at 25 C Frequency Stability over temperature 20 C to +70 C Aging Shunt Capacitance
MX-041 Oven Controlled Crystal Oscillator
MX-041 Oven Controlled Crystal Oscillator MX-041 Features Applications SC-Cut resonator Frequency Range: 5 MHZ to 20 MHZ Low Package Height Temperature stability to 0.4 Aging rate 0.1 /day Frequency range
Synchronized Crystal Oscillator, General Requirements. AH-ASCMXXXG-X Series PATENT PENDING
PATENT PENDING Description The Synchronized Crystal Oscillator is intended for use in the system, which requires multiple clocks in different nodes of the system to run synchronously in frequency without
Rakon Product Proposal
RTX5032A -- SMD Temperature Compensated Crystal Oscillator -- -- High performance TCXO offering excellent Phase Noise, Frequency Stability and VCO tilt compensation. -- Product description -- The RTX5032A
VT-841 VT-841. Temperature Compensated Crystal Oscillator. Description. Applications. Features. Block Diagram. Output V DD.
VT-841 Temperature Compensated Crystal Oscillator VT-841 Description Vectron s VT-841 Temperature Compensated Crystal Oscillator (TCXO) is a quartz stabilized, clipped sine wave output, analog temperature
Solder Dip Options T = Standard S = Sn60Pb40 G=SAC305. Package 86 =Leaded 80 = Formed Leads 85=SMT
Description Q-Tech s 5x7mm LVDS and LVPECL hybrid oscillators consist of an IC operating at various supply voltages of 2.5V and 3.3Vdc and a miniature strip quartz crystal. The series is offered in various
PX-990 Crystal Oscillator Ultra Low Noise and G-Sensitivity
PX-990 Crystal Oscillator Ultra Low Noise and G-Sensitivity PX-990 Ultra low Phase Noise Ultra low G-Sensitivity Vibration hardened Tight Tolerances Frequency Range Standard Frequency Features 60-120MHz
CMOS/LVCMOS HF VCXO AE-X32BXX-X Series
CMOS/LVCMOS HF VCXO Description The AE-X32BXX Series of voltage controlled crystal oscillators (VCXO) provides high frequency with CMOS/LVCMOS output. The device does not use any frequency multiplication,
J-Type Voltage Controlled Crystal Oscillator
J-Type Voltage Controlled Crystal Oscillator Product is compliant to RoHS directive and fully compatible with lead free assembly Features Output Frequencies from 1.024 MHz to 170.000 MHz +3.3 or +5.0 volt
Ultra Low Phase Noise VCXO
FEATURES: High "Q", 3rd Overtone Crystal Technology Ultra Low Phase Noise -162 dbc/hz Typ. @ 10kHz offset, 100MHz carrier Standard LVCMOS RF Output Wide Operating Temperature (-40ºC to +85ºC) standard
VCC6-L/V 2.5 or 3.3 volt LVDS Oscillator
VCC6-L/V 2.5 or 3.3 volt LVDS Oscillator Features 2.5 or 3.3 V LVDS 3rd Overtone Crystal for best jitter performance Output frequencies to 270 MHz Low Jitter < 1 ps rms, 12kHz to 20MHz Enable/Disable output
TELEFILTER Filter Specification TFS 141 C 1/5
TELEFILTER Filter Specification TFS 4 C /5 Measurement condition Ambient Temperature: 23 C Input Power Level: 0 dbm Terminating Impedance at fc*: input:,25 kω // -9,4 pf output:,36 kω // -9,9 pf Characteristics
MEMS Oscillator, Low Power, LVCMOS, MHz to MHz
Features: MEMS Technology Direct pin to pin drop-in replacement for industry-standard packages LVCMOS Compatible Output Industry-standard package 2.0 x 1.6, 2.5 x 2.0, 3.2 x 2.5, 5.0 x 3.2, and 7.0 x 5.0
ELECTRICAL SPECIFICATIONS PARAMETER SYMBOL CONDITION VALUE UNIT. 52 standard frequencies between 3.57MHz and MHz
Frequency Oscillator Page 1 of 6 Low Power Consumption of 3.5 typical at 1.8 52 Standard frequencies between 3.57MHz and 77.760 MHz HCMOS/ LCMOS compatible output SMD package 2.0 x 1.6 mm ELECTRICAL SPECIFICATIONS
32.768kHz IoT Optimized SMD Crystal
FEATURES Electrical Specifications Industry s smallest Tuning Fork Crystal (1.20 x 1.00 x 0.35 mm package) Ideally suited for space constraint IoT, Wearables & Wireless applications Simultaneously optimized
VX-500 Voltage Controlled Crystal Oscillator
VX-00 Voltage Controlled Crystal Oscillator VX-00 Features 9x14 J-Leaded Surface Mount Package ACMOS, TTL and LVPECL Available with 4 point crystal mount for Harsh Environment Applicatio Military Temperature
Vectron International Filter specification TFS 121 1/5
Vectron International Filter specification TFS 121 1/ Measurement condition Ambient temperature: 23 Input power level: 0 dbm Terminating impedance: * Input: 130 Ω II 1,7 pf Output: 130 Ω II 1,7 pf Characteristics
VT-860 Temperature Compensated Crystal Oscillator
VT-860 Temperature Compensated Crystal Oscillator VT-860 Description Vectron s VT-860 Temperature Compensated Crystal Oscillator (TCXO) is a quartz stabilized, Clipped sine wave output, analog temperature
Logic & Supply Voltage: L = LVHCMOS +3.3V at 15pF N=LVHCMOS +2.5V at 15pF R = LVHCMOS +1.8V at 15pF
Description Q-Tech s surface-mount QTCC230 oscillators consist of an IC 3.3Vdc, 2.5Vdc, and 1.8Vdc clock square wave generator and a miniature strip AT quartz crystal built in a low profile ceramic package
PX-570 High Temperature Crystal Oscillator
PX-570 High Temperature Crystal Oscillator PX-570 Vectron offers a High Temperature Crystal Oscillator (PX-570) product platform for extreme environment applications. In addition to its wide operating
SCG4540 Synchronous Clock Generators
SCG4540 Synchronous Clock Generators PLL 2111 Comprehensive Drive Aurora, Illinois 60505 Phone: 630-851-4722 Fax: 630-851-5040 www.conwin.com Features Phase Locked Output Frequency Control Intrinsically
Other Options Available For An Additional Charge Hot Solder Dip Sn60/Pb40 per MIL-PRF Specifications subject to change without prior notice.
6QeOdUbfUaZ Q-Tech s surface-mount QTCC570 oscillators consist of an IC 5Vdc, 3.3Vdc, 2.5Vdc, and.8vdc clock square wave generator and a miniature strip AT quartz crystal built in a low profile ceramic
Model 149 Stratum 3E, 9x14 mm OCXO
Features 10 to 50 MHz Frequency Range Compliant to Stratum 3E of GR1244CORE Surface Mount 3.3V or 5.0V operation Low Jitter/Phase Noise Tape and Reel Packaging Applications Telecom Switching Wireless Communication
OX-175 Ultra Low Noise Oven Controlled Crystal Oscillator
OX-175 Ultra Low Noise Oven Controlled Crystal Oscillator OX-175 The OX-175 is a low phase noise, high-frequency ovenized crystal oscillator in a 28 x 38 mm package. The oscillator has a noise floor of
FX-101 Frequency Translator
Product Data Sheet FX-101 Frequency Translator Features Output frequencies up to 77.760 MHz Jitter Generation OC-192 compliant Jitter transfer per GR-253-CORE Single 5.0 or 3.3 Vdc supply Locked to specified
ELECTRICAL SPECIFICATIONS PARAMETER SYMBOL CONDITION VALUE UNIT
MEMS Oscillator Page 1 of 5 Ultra Low power: < 1 A Fixed 32.768 khz No Supply Voltage external bypass capacitors required XTAL replacement in 2.0 mm x 1.2 mm SMD SMD package 2.0 x 1.2 mm ELECTRICAL SPECIFICATIONS
Vectron International Filter specification TFS 868P 1/5
Vectron International Filter specification TFS 868P 1/5 Measurement condition Ambient temperature: 23 C Input power level: 0 dbm Terminating impedance: * Input: 80 Ω -1.7 pf Output: 80 Ω -1.7 pf Characteristics
VC-827 Differential (LVPECL, LVDS) Crystal Oscillator
C-827 Differential (LPECL, LDS) Crystal Oscillator C-827 Description ectron s C-827 Crystal Oscillator is a quartz stabilized, differential output oscillator, operating off a 2.5 or 3.3 volt power supply
CMOS, Ultra-low Jitter Voltage Controlled Crystal Oscillators (VCXOs)
GTJF538 series (5.0x3.2x1.4 mm, 8 pads), a member of Mercury QuikXO quick-turn Voltage Controlled Crystal Oscillators 9VCXOs), features CMOS output and femtosecond (f. sec.) RMS phase jitter (163 f. sec.
VFH2321-VFH2324 VFH2421-VFH2424 XO Hi-REL, 1.8V 5x7mm SMD, HCMOS
Features Leadless chip carrier package is hermetically sealed for superior aging and field performance Crystal angle controlled to ±0.5 minute for excellent temperature stability 168 hour Class B burn-in
IQXT IQXT-205-3
IQXT-205-3 IQXT-205-3 is a 2.0 x 1.6mm SMD Temperature Compensated Crystal Oscillator (TCXO) in a hermetically Model Name IQXT-205-3-18 IQXT-205-3-25 IQXT-205-3-28 IQXT-205-3-30 IQXT-205-3-33 A 1.8V version
OX-175 Ultra Low Noise Oven Controlled Crystal Oscillator
OX-175 Ultra Low Noise Oven Controlled Crystal Oscillator OX-175 The OX-175 is a low phase noise, high-frequency ovenized crystal oscillator in a 28 x 38 mm package. The oscillator has a noise floor of
Performance Specifications. Parameter Min Typ Max Units Condition. ppm ppm ppm ppm ppm ppm ppm ppm ppm ppm ppm ppm ppm ppm ppm ppm ppm
PX-360 Precision Crystal Oscillator PX-360 Features Frequency: 1MHz to 80 MHz 20 Lead Flatpack package Package equivalent of MIL-PRF-55310/21 4-Point resonator mount for high shock & vibration performance
VX-805 Voltage Controlled Crystal Oscillator
VX-805 Voltage Controlled Crystal Oscillator VX-805 Description The VX-805 is a Voltage Control Crystal Oscillator that operates at the fundamental frequency of the internal crystal. The crystal is a high-q
Vectron International Filter specification TFS 400P 1/5
Vectron International Filter specification TFS 400P /5 Measurement condition Ambient temperature: 23 C Input power level: 0 dbm Terminating impedance: * Input: 280 Ω -6, pf Output: 440 Ω -5,2 pf Characteristics
Ultra-Low Phase Noise OCXO
APPLICATIONS: COTS Military & Industrial Radios & Timing Circuits Cellular Infrastructure Radar Systems Test & Measurement Equipment GPS Tracking with precision hold-over accuracy WiMax / WLAN Precision
2.0 FREQUENCY CHARACTERISTICS Line Parameter Test Condition Value Unit 2.1 Nominal frequency range
CFPT9000 -- SMD Temperature Compensated Crystal Oscillator (PLUTO) -- -- A series of surface mountable 7.0x5.0mm Temperature Compensated Voltage Controlled Crystal Oscillators (TCVCXOs) for medium to high
VT-802 VT-802. Temperature Compensated Crystal Oscillator. Description
T-802 Temperature Compensated Crystal Oscillator T-802 Description ectron s T-802 Temperature Compensated Crystal Oscillator (TCXO) is a quartz stabilized, CMOS output, analog temperature compensated oscillator,
Vectron International Filter specification TFS 1227A 1/5
Vectron International Filter specification TFS 1227A 1/5 Measurement condition Ambient temperature: 23 C Input power level: 0 dbm Terminating impedance: Input: 50 Ω 0 pf Output: 50 Ω 0 pf Characteristics
VVC1 VVC2 Voltage Controlled Crystal Oscillator
VVC1 VVC2 Voltage Controlled Crystal Oscillator Features The VVC1 Voltage Controlled Crystal Oscillator VCXO with a CMOS output Small 5.0 X 7.0 X 1.9 mm package Output frequencies to 66 MHz 5.0 or 3.3
Specification AXIOM210 Rev.: 3 Date: Oscillator type: Ultra-Low Phase Noise OCXO in Vibration-isolated Package
in Specification AXIOM210 Rev.: 3 Date: 2015-02-17 Oscillator type: Ultra-Low Phase Noise OCXO in Vibration-isolated Package Parameter min. typ. max. Unit Condition Frequency range 50 130 MHz Standard
Vectron International Filter specification TFS 125P 1/5
Vectron International Filter specification TFS 125P 1/5 Measurement condition Ambient temperature: 23 C Input power level: 0 dbm Terminating impedance: * Input: 115 Ω -21 pf Output: 110 Ω -35 pf Characteristics
OX-304 at 10 MHz Ultra Low Phase Noise Oven Controlled Crystal Oscillator
OX-304 at 10 MHz Ultra Low Phase Noise Oven Controlled Crystal Oscillator OX-304 The OX-304 is an Ultra Low Phase Noise Ovenized Crystal Oscillator with a noise floor as low as -173 dbc/hz in a compact
VI TELEFILTER Filter Specification TFS 70U - 1/5
Filter Specification TFS 70U - 1/5 1. Measurement condition : Ambient temperature T A: 23 C. Input power level: 0 dbm. Terminating impedances in f c : for input: 50 Ω 0 pf. for output: 50 Ω 0 pf. 2. Characteristics
Ultra-miniature, Low Power, kHz MEMS Oscillator
ESD Sensitive Moisture Sensitivity Level (MSL) 1 FEATURES: APPLICATIONS: Factory programmable output frequency: 1Hz to 32.768kHz Available in two types of ultra-miniature packages: 2.0 x 1.2 x 0.6mm (SMD);
S1903 and S1950 Series
Actual Size = 5 x 7mm Product Features 3.3V or 5V ACMOS/TTL compatible logic levels Very tight frequency stability available Fast clock edge rate Pin-compatible with standard 5x7mm packages Designed for