PX-990 Crystal Oscillator Ultra Low Noise and G-Sensitivity

Size: px
Start display at page:

Download "PX-990 Crystal Oscillator Ultra Low Noise and G-Sensitivity"

Transcription

1 PX-990 Crystal Oscillator Ultra Low Noise and G-Sensitivity PX-990 Ultra low Phase Noise Ultra low G-Sensitivity Vibration hardened Tight Tolerances Frequency Range Standard Frequency Features MHz 120MHz Applications Vibration Environment Airborne and Military Equipment Portable Equipment Radar Performance Specifications Frequency Stabilities 1 Parameter Min Typical Max Units Condition vs. operating temperature range (referenced to nominal frequency) to +70 C -40 to +85 C Options 3 Initial tolerance vs. supply voltage change vs. load change vs. aging / 1 year vs. aging / 10 years C V S ±5% static Load ±10% static after 30 days of operation after 30 days of operation Page 1

2 Performance Specifications Supply Voltage (Vs) Parameter Min Typical Max Units Condition Supply voltage (standard) Current consumption RF Output Signal [standard] Sinewave 50 Ω load VDC ma Load Ohm Output Power dbm 50 Ω load Harmonics -30 dbc 50 Ω load Spurious dbc 50 Ω load Phase Noise Additional Parameters 10 Hz 100 Hz 1 khz 10 khz 100 khz 1 MHz G-Sensitivity 0.5 ppb/g without shock absorbers 3 Weight g Processing & Packing Random Vibration Shock Handling & Processing Note Additional Environmental Conditions MIL-STD-202G; Method 214A; Cond H MIL-STD-202G; Method 213B; 15 g / 20 ms (for softest shock absorber i.e. lowest resonance 120 MHz 13 dbm sinewave no vibration Solderability Solvent Resistance JEDEC J-STD-002: non RoHS compliant non-washable device Absolute Maximum Ratings Supply voltage (Vs) 16.0 V Output Load Ω Operable Temperature Range C Storage Temperature Range C Page 2

3 Outline Drawing / Enclosure Parameter Min Typical Max Units Condition G295 including vibration isolators. Mechanical resonance frequency Hz Please specify vibration profile and phase noise max values under vibration Dimensions in mm Pin Connections 1 N.C. 2 Supply Voltage (Vs) 3 RF-Output 4 Ground (Case) Housing Options Parameter G295 Standard with vibration isolators Note Option please specify vibration profile and phase noise max values under vibration G313 without vibration isolators Option please specify vibration profile and phase noise max values under vibration Note: Customized housings are possible. Please specify housing and vibration profile and phase noise max values under vibration Page 3

4 Typical Phase 120 MHz without vibration Typical Frequency Stability vs Temperature Page 4

5 Typical MHz without shock absorber G-Sensitivity: PX MHz; 0,06g 2 /Hz Vibration spectrum 1,00 0,90 X-Axis Y-Axis 0,1 G-Sensitivity [ppb/g] 0,80 0,70 0,60 0,50 0,40 0,30 Z-Axis Total PSD [g 2 /Hz] 0,01 0,001 0,20 0,10 0, Frequency [Hz] 0,0001 Frequency [Hz] Phase noise: PX-990; 120MHz; 0,06g 2 /Hz Calculation equation according to Vig-Tutorial X-Axis Y-Axis g-sensitivity: 2 fv G = Apeak f 0 10 L ( fv ) 20 Phase Noise [] Z-Axis Peak g-level: A peak Quarz = PSD Oscillator Z X 2 Y Comments: Measured without shock absorbers Notes: 1. Contact factory for improved stabilities or additional product options. Not all options and codes are available at all frequencies. 2. Phase noise degrades with increasing output frequency. 3. Contact factory for availability. Unless other stated all values are valid after warm-up time and refer to typical conditions for supply voltage, frequency control voltage, load, temperature (25 C). Subject to technical modification. Page 5

6 Typical Phase 120 MHz with vibration PX-990 without shock absorber vibration spectrum DO-160 curve C Phase Noise [] -50 X-axis Y-axis Z-axis Typical Phase Noise: PX-990 vibration spectrum DO-160 curve C Typical Phase noise: PX-990 vibration spectrum DO-160 curve C Phase Noise [] X-axis Y-axis Z-axis Phase Noise [] X-axis Y-axis Z-axis Ordering Information All Oscillators from the 990s Product Group are Customized. Please include your complete specification, including vibration profile and required phase noise and phase noise under vibration to your inquiry. USA: Vectron International 267 Lowell Road, Suite 102 Hudson, NH Tel: Fax: For Additional Information, Please Contact Europe: Vectron International Landstrasse, D Neckarbischofsheim, Germany Tel: +49 (0) Fax: +49 (0) Asia: Vectron International 68 Yin Cheng Road(C), 22nd Floor One LuJiaZui Pudong, Shanghai , China Tel: Fax: Disclaimer Vectron International reserves the right to make changes to the product(s) and or information contained herein without notice. No liability is assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information. Page 6 Rev: 04/2016

VX-990 Voltage Controlled Crystal Oscillator Ultra Low Noise and G-Sensitivity

VX-990 Voltage Controlled Crystal Oscillator Ultra Low Noise and G-Sensitivity VX-990 Voltage Controlled Crystal Oscillator Ultra Low Noise and G-Sensitivity VX-990 Ultra low Phase Noise Ultra low G-Sensitivity Vibration hardened Tight Tolerances Frequency Range Standard Frequency

More information

TX-705 Temperature Compensated Crystal Oscillator

TX-705 Temperature Compensated Crystal Oscillator TX-705 Temperature Compensated Crystal Oscillator TX-705 Features Applications The TX-705 is a TCXO family designed for applications where superior g-sensitivity and good phase noise together with small

More information

OX-175 Ultra Low Noise Oven Controlled Crystal Oscillator

OX-175 Ultra Low Noise Oven Controlled Crystal Oscillator OX-175 Ultra Low Noise Oven Controlled Crystal Oscillator OX-175 The OX-175 is a low phase noise, high-frequency ovenized crystal oscillator in a 28 x 38 mm package. The oscillator has a noise floor of

More information

Performance Specifications

Performance Specifications OX-208 Oven Controlled Crystal Oscillator OX-208 OX-208 The OX-208 is a high stability ovenized crystal oscillator in a 25 x 25 mm package, capable of aging rates of 0.15 /day and temperature stabilities

More information

OX-171 Oven Controlled Crystal Oscillator

OX-171 Oven Controlled Crystal Oscillator OX-171 Oven Controlled Crystal Oscillator OX-171 The OX-171 is a high stability ovenized crystal oscillator in a 28 x 38 mm package, capable of aging rates of 0.06 /day and temperature stabilities of 1

More information

OX-200 Oven Controlled Crystal Oscillator

OX-200 Oven Controlled Crystal Oscillator OX-200 Oven Controlled Crystal Oscillator OX-200 Features Reflow Process Compatible AT-Cut and SC-Cut Crystal Options Low Profile Compact Package Applications Base Stations Test Equipment Synthesizers

More information

PS-701 SAW Oscillator

PS-701 SAW Oscillator PS-701 SAW Oscillator PS-701 The PS-701 SO (Saw Oscillator from Vectron is a high frequency, ultra low phase noise oscillator designed to support high speed data converters and 100G / 400G coherent optical

More information

Performance Specifications. Parameter Min Typ Max Units Condition. ppm ppm ppm ppm ppm ppm ppm ppm ppm ppm ppm ppm ppm ppm ppm ppm ppm

Performance Specifications. Parameter Min Typ Max Units Condition. ppm ppm ppm ppm ppm ppm ppm ppm ppm ppm ppm ppm ppm ppm ppm ppm ppm PX-360 Precision Crystal Oscillator PX-360 Features Frequency: 1MHz to 80 MHz 20 Lead Flatpack package Package equivalent of MIL-PRF-55310/21 4-Point resonator mount for high shock & vibration performance

More information

TX-500 Temperature Compensated Crystal Oscillator

TX-500 Temperature Compensated Crystal Oscillator TX-500 Temperature Compensated Crystal Oscillator TX-500 Features Low Phase Noise Low power consumption Output: HCMOS, Clipped Sinewave, PECL, True Sinewave Tight Tolerances Frequency range 1 of 6.4-160

More information

MX-600 Microprocessor Controlled Crystal Oscillator High Precision

MX-600 Microprocessor Controlled Crystal Oscillator High Precision MX-600 Microprocessor Controlled Crystal Oscillator High Precision MX-600 Features Ultra High Stability MCXO Low Power Consumption Meets Stratum 3 acc. GR-1244 ROHS 6 Compliant Frequency Range 1 : 8-40

More information

Performance Specifications

Performance Specifications TX-502 Temperature Compensated Crystal Oscillator High Precision TX-502 Features High Precision TCXO OCXO Replacement OCXO Temperature Performance Low power consumption Tight Tolerances Frequency range

More information

TX-707 Low g-sensitivity Temperature Compensated Crystal Oscillator

TX-707 Low g-sensitivity Temperature Compensated Crystal Oscillator TX-707 Low g-sensitivity Temperature Compensated Crystal Oscillator TX-707 The TX-707 Series TCXO combines innovative manufacturing and the latest technology to provide low phase noise and excellent g-sensitivity.

More information

TX-801 Temperature Compensated Crystal Oscillator

TX-801 Temperature Compensated Crystal Oscillator TX-801 Temperature Compensated Crystal Oscillator TX-801 Features Applications The TX-801 TCXO provides fully compliant Stratum 3 levels of stability in a 5x3.2mm package. It is ideal for timing over IP

More information

MX-503 Microprocessor Controlled Crystal Oscillator High Precision

MX-503 Microprocessor Controlled Crystal Oscillator High Precision MX-503 Microprocessor Controlled Crystal Oscillator High Precision MX-503 Features Ultra High Stability MCXO Low Power Consumption Meets Stratum 3 acc. GR-1244 ROHS 6 Compliant Frequency Range 1 : 8-50

More information

VS-507 Voltage Controlled SAW Oscillator

VS-507 Voltage Controlled SAW Oscillator VS-507 Voltage Controlled SAW Oscillator VS-507 Description The VS-507 VCSO (Voltage Controlled Saw Oscillator from Vectron is an ultra high frequency, ultra low phase noise oscillator. The VS-507 provides

More information

VX-500 Voltage Controlled Crystal Oscillator

VX-500 Voltage Controlled Crystal Oscillator VX-00 Voltage Controlled Crystal Oscillator VX-00 Features 9x14 J-Leaded Surface Mount Package ACMOS, TTL and LVPECL Available with 4 point crystal mount for Harsh Environment Applicatio Military Temperature

More information

PX-421 Crystal Oscillator

PX-421 Crystal Oscillator PX-421 Crystal Oscillator PX-421 PX-421 PX-421 PX-421 Features Frequency: 10 KHz to 125 MHz 4 Pin 1/2 DIP Package with Through Hole and SMD lead optio Fully RoHS Compliant * No pure tin is used in this

More information

VS-504 Dual Frequency VCSO High Frequency

VS-504 Dual Frequency VCSO High Frequency VS-504 Dual Frequency VCSO High Frequency VS-504 The VS-504 dual frequency VCSO (Voltage Controlled Saw Oscillator from Vectron is a high frequency, ultra low phase noise oscillator designed to support

More information

EX-421 Evacuated Miniature Crystal Oscillator

EX-421 Evacuated Miniature Crystal Oscillator EX-421 Evacuated Miniature Crystal Oscillator EX-421 Description The EX-421 provides exceptionally low aging rates and tight temperature stabilities in an extremely small package over a wide range of environmental

More information

PX-422 Hybrid TTL Clock Oscillator

PX-422 Hybrid TTL Clock Oscillator PX-422 Hybrid TTL Clock Oscillator PX-422 Features Applicatio Frequency: 1 to 80 MHz 40-Pad Leadless Chip Carrier (LCC) Package equivalent of MIL-PRF-55310/19 Surface Mount, Low Profile Output Option:

More information

Performance Specifications. Frequency Stabilities Supply Voltage (Vs) ma ma. RF Output

Performance Specifications. Frequency Stabilities Supply Voltage (Vs) ma ma. RF Output TX-309 Hi-Rel Temperature Compensated Crystal Oscillator TX-309 Features Radiation Tolerant Small footprint Frequency Range: 0.3 MHZ to 150 MHZ Previous Model: C2501 Applications Reference clock for space

More information

OX-221 Oven Controlled Crystal Oscillator

OX-221 Oven Controlled Crystal Oscillator OX-221 Oven Controlled Crystal Oscillator OX-221 Features Surface Mount package SC_CUT Crystal Low Profile Compact Package standard frequency: 1, 2, 3.72 MHz Applications Base stations Test equipment Synthesizers

More information

TX-700 Temperature Compensated Crystal Oscillator

TX-700 Temperature Compensated Crystal Oscillator TX-700 Temperature Compensated Crystal Oscillator Features EFC Standard Small Size 0% RoHS Compliant Low Profile range of 6.4-52 MHz Standard Frequencies:, 12.8, 16.384, 19.44, 20, 20.48 MHz Applications

More information

VX-505 Voltage Controlled Crystal Oscillator Extended Temperature

VX-505 Voltage Controlled Crystal Oscillator Extended Temperature VX-505 Voltage Controlled Crystal Oscillator Extended Temperature VX-505 Features AT-Cut Crystal Surface Mount FR4 based package Reflow Process Compatible Extended temperature range -55..+125 C Low Tight

More information

OX-204 at 10 MHz Ultra Low Phase Noise Oven Controlled Crystal Oscillator

OX-204 at 10 MHz Ultra Low Phase Noise Oven Controlled Crystal Oscillator OX-204 at 10 MHz Ultra Low Phase Noise Oven Controlled Crystal Oscillator OX-204 OX-204 The OX-204 is an Ultra Low Phase Noise Ovenized Crystal Oscillator with a noise floor as low as -175 dbc/hz. Designed

More information

VX-706 Voltage Controlled Crystal Oscillator

VX-706 Voltage Controlled Crystal Oscillator VX-706 Voltage Controlled Crystal Oscillator VX-706 Features AT-Cut Crystal Surface Mount FR4 based package Single layer Reflow Process Compatible Low & Jitter Tight Stabilities Frequency Range 40-300MHz

More information

VX-701 Voltage Controlled Crystal Oscillator

VX-701 Voltage Controlled Crystal Oscillator VX-701 Voltage Controlled Crystal Oscillator VX-701 Features AT-Cut Crystal Surface Mount FR4 based package Reflow Process Compatible Low Tight Stabilities Frequency Range 16-200MHz Standard Frequencies

More information

MD-403 I2C InterfaceOven Controlled Crystal Oscillator

MD-403 I2C InterfaceOven Controlled Crystal Oscillator MD-43 I2C InterfaceOven Controlled Crystal Oscillator MD-43 The MD-43 is a Vectron module that contains a medium size ovenized crystal oscillator and an I 2 C interface that communicates with an onboard

More information

VX-503 Voltage Controlled Crystal Oscillator

VX-503 Voltage Controlled Crystal Oscillator VX3 Voltage Controlled Crystal Oscillator VX3 Features Description The VX3 voltage controlled crystal oscillator expands VI s advanced VCXO performance capabilities while adhering to a package footprint

More information

Performance Specifications

Performance Specifications OX-280 Oven Controlled Crystal Oscillator OX-280 Features Surface Mount Package AT-CUT and SC_CUT Crystal Options Low Profile Compact Package Compact Package Applications Base stations Test equipment Synthesizers

More information

OX-046 VHF low g-sensitivity Oven Controlled Crystal Oscillator

OX-046 VHF low g-sensitivity Oven Controlled Crystal Oscillator OX-046 VHF low g-sensitivity Oven Controlled Crystal Oscillator OX-046 Features Ultra Low G-Sensitivity Low Phase Noise Very High Frequency Frequency Range: 50 MHZ to 250 MHZ Standard Frequency: 100 MHz

More information

HT RTCXO High Temperature Low Power Real Time Clock Crystal Oscillators

HT RTCXO High Temperature Low Power Real Time Clock Crystal Oscillators HT RTCXO High Temperature Low Power Real Time Clock Crystal Oscillators PX-702 PX-570 PX-420 Vectron offers a High Temperature Low Power Real Time Clock Crystal Oscillator (HT RTCXO) product platform's

More information

PX-570 High Temperature Crystal Oscillator

PX-570 High Temperature Crystal Oscillator PX-570 High Temperature Crystal Oscillator PX-570 Vectron offers a High Temperature Crystal Oscillator (PX-570) product platform for extreme environment applications. In addition to its wide operating

More information

PX-702 PX-570 PX-420

PX-702 PX-570 PX-420 High Temperature Low Power Real Time Clock Crystal Oscillators PX-702 PX-570 PX-420 Vectron offers a High Temperature Low Power Real Time Clock Crystal Oscillator (HT RTC XO) product platform for extreme

More information

OX-304 at 10 MHz Ultra Low Phase Noise Oven Controlled Crystal Oscillator

OX-304 at 10 MHz Ultra Low Phase Noise Oven Controlled Crystal Oscillator OX-304 at 10 MHz Ultra Low Phase Noise Oven Controlled Crystal Oscillator OX-304 The OX-304 is an Ultra Low Phase Noise Ovenized Crystal Oscillator with a noise floor as low as -173 dbc/hz in a compact

More information

OX-043 Low g-sensitivity Oven Controlled Crystal Oscillator

OX-043 Low g-sensitivity Oven Controlled Crystal Oscillator OX-043 Low g-sensitivity Oven Controlled Crystal Oscillator OX-043 Features Applications Ultra Low g-sensitivity Low Phase Noise High Stability Frequency Range: 8 MHZ to 15 MHZ Standard Frequency 10 MHz

More information

VT-800 Temperature Compensated Crystal Oscillator Previous Vectron Model VTC4

VT-800 Temperature Compensated Crystal Oscillator Previous Vectron Model VTC4 VT-800 Temperature Compensated Crystal Oscillator Previous Vectron Model VTC4 VT-800 Description Vectron s VT-800 Temperature Compensated Crystal Oscillator (TCXO) is a quartz stabilized, clipped sine

More information

VS-800 Ultra-Low Jitter High Frequency VCSO

VS-800 Ultra-Low Jitter High Frequency VCSO VS-800 Ultra-Low Jitter High Frequency VCSO VS-800 Description The VS-800 is a Voltage Controlled SAW Oscillator that operates at the fundamental frequency of the internal SAW resonator. The SAW resonator

More information

VT-860 Temperature Compensated Crystal Oscillator

VT-860 Temperature Compensated Crystal Oscillator VT-860 Temperature Compensated Crystal Oscillator VT-860 Description Vectron s VT-860 Temperature Compensated Crystal Oscillator (TCXO) is a quartz stabilized, Clipped sine wave output, analog temperature

More information

OX-175 Ultra Low Noise Oven Controlled Crystal Oscillator

OX-175 Ultra Low Noise Oven Controlled Crystal Oscillator OX-175 Ultra Low Noise Oven Controlled Crystal Oscillator OX-175 The OX-175 is a low phase noise, high-frequency ovenized crystal oscillator in a 28 x 38 mm package. The oscillator has a noise floor of

More information

MHz. Performance Specifications

MHz. Performance Specifications VX-501-0276-245M76 Preliminary version: Subject to technical modification. VCXO VX-501-0276-245M76 Nominal frequency (f0) 245.76 MHz Performance Specifications Frequency stabilities vs. operating temp.

More information

MX-041 Oven Controlled Crystal Oscillator

MX-041 Oven Controlled Crystal Oscillator MX-041 Oven Controlled Crystal Oscillator MX-041 Features Applications SC-Cut resonator Frequency Range: 5 MHZ to 20 MHZ Low Package Height Temperature stability to 0.4 Aging rate 0.1 /day Frequency range

More information

VC-820 CMOS Crystal Oscillator

VC-820 CMOS Crystal Oscillator C-20 CMOS Crystal Oscillator C-20 ectron s C-20 Crystal Oscillator (XO) is a quartz stabilized square wave generator with a CMOS output. The C-20 uses a fundamental or a 3rd overtone crystal, oscillating

More information

VX-805 Voltage Controlled Crystal Oscillator

VX-805 Voltage Controlled Crystal Oscillator VX-805 Voltage Controlled Crystal Oscillator VX-805 Description The VX-805 is a Voltage Control Crystal Oscillator that operates at the fundamental frequency of the internal crystal. The crystal is a high-q

More information

VS-708 Single Frequency VCSO

VS-708 Single Frequency VCSO VS-708 Single Frequency VCSO VS-708 Description The VS-708 is a Voltage Controlled SAW Oscillator that operates at the fundamental or a fraction of the internal SAW filter frequency. The SAW component

More information

Specification AXIOM210 Rev.: 3 Date: Oscillator type: Ultra-Low Phase Noise OCXO in Vibration-isolated Package

Specification AXIOM210 Rev.: 3 Date: Oscillator type: Ultra-Low Phase Noise OCXO in Vibration-isolated Package in Specification AXIOM210 Rev.: 3 Date: 2015-02-17 Oscillator type: Ultra-Low Phase Noise OCXO in Vibration-isolated Package Parameter min. typ. max. Unit Condition Frequency range 50 130 MHz Standard

More information

Note. Figure1. The Temperature Stability ranges of various oscillator types

Note. Figure1. The Temperature Stability ranges of various oscillator types Tutorial on TCXOs Introduction to TCXOs Helping Customers Innovate, Improve & Grow Note Application Note TCXOs are necessary when a level of temperature stability is required that cannot be reached by

More information

Block Diagram. Figure 1. Functional Block Diagram

Block Diagram. Figure 1. Functional Block Diagram MD-171 High Stability GNSS (GPS and GLONASS) Disciplined Oscillator Module MD-171 The MD-171 is a Vectron GNSS disciplined module. It is a fully integrated GNSS disciplined oscillator module in a compact

More information

VS-701 High Shock Discrete Voltage Controlled SAW Oscillator

VS-701 High Shock Discrete Voltage Controlled SAW Oscillator VS-701 High Shock Discrete Voltage Controlled SAW Oscillator VS-701 The VS-701 VCSO (Voltage Controlled Saw Oscillator from Vectron is a high frequency, ultra low phase noise oscillator designed to support

More information

VT-501 Temperature Compensated Crystal Oscillator Previous Vectron Model VTD3

VT-501 Temperature Compensated Crystal Oscillator Previous Vectron Model VTD3 T-501 Temperature Compensated Crystal Oscillator Previous ectron Model TD3 T-501 Description ectron s T-501 Temperature Compensated Crystal Oscillator (TCXO) is a quartz stabilized, CMOS output, analog

More information

VC-827 Differential (LVPECL, LVDS) Crystal Oscillator

VC-827 Differential (LVPECL, LVDS) Crystal Oscillator C-827 Differential (LPECL, LDS) Crystal Oscillator C-827 Description ectron s C-827 Crystal Oscillator is a quartz stabilized, differential output oscillator, operating off a 2.5 or 3.3 volt power supply

More information

VC-711 Differential (LVPECL, LVDS) Crystal Oscillator

VC-711 Differential (LVPECL, LVDS) Crystal Oscillator C-7 Differential (LPECL, LDS) Crystal Oscillator C-7 Description ectron s C-7 Crystal Oscillator is a quartz stabilized, differential output oscillator, operating off either a 2.5 or 3.3 volt power supply

More information

MD-173 High Stability Coefficient Oscillator I C interface Oven Controlled Crystal Oscillator

MD-173 High Stability Coefficient Oscillator I C interface Oven Controlled Crystal Oscillator MD-173 High Stability Coefficient Oscillator I C interface Oven Controlled Crystal Oscillator 2 MD-173 The MD-173 is a Microsemi Coefficient Oscillator (CCXO) that contains a high-stability ovenized crystal

More information

VTC4 series Voltage Controlled Temperature Compensated Crystal Oscillator

VTC4 series Voltage Controlled Temperature Compensated Crystal Oscillator VTC4 series Voltage Controlled Temperature Compensated Crystal Oscillator Features Clipped Sine Wave Output Output Frequencies to 27 MHz Fundamental Crystal Design Optional VCXO Function available Gold

More information

VT-701 Temperature Compensated Crystal Oscillator Previous Vectron Model VTC2

VT-701 Temperature Compensated Crystal Oscillator Previous Vectron Model VTC2 T-701 Temperature Compensated Crystal Oscillator Previous ectron Model TC2 T-701 Description ectron s T-701 Temperature Compensated Crystal Oscillator (TCXO) is a quartz stabilized, clipped sine wave output,

More information

VV-701 Voltage Controlled Crystal Oscillator Previous Vectron Model VVC1/VVC2

VV-701 Voltage Controlled Crystal Oscillator Previous Vectron Model VVC1/VVC2 -701 oltage Controlled Crystal Oscillator Previous ectron Model C1/C2-701 Description ectron s -701 oltage Controlled Crystal Oscillator (CXO) is a quartz stabilized square wave generator with a CMOS output.

More information

Description. Block Diagram. Complementary Output. Output. Crystal. Oscillator. E/D or NC

Description. Block Diagram. Complementary Output. Output. Crystal. Oscillator. E/D or NC CC6 LPECL, LDS Crystal Oscillator Data Sheet CC6 Description ectron s CC6 Crystal Oscillator is a quartz stabilized, differential output oscillator, operating off either a 2.5 or 3.3 volt supply, hermetically

More information

VTC2 Series Voltage Controlled Temperature Compensated Crystal Oscillator

VTC2 Series Voltage Controlled Temperature Compensated Crystal Oscillator VTC2 Series Voltage Controlled Temperature Compensated Crystal Oscillator Features CMOS Square Wave Output Enable Disable Feature Output Frequencies to 30 MHz Fundamental Crystal Design Optional VCXO function

More information

VC-801 CMOS Crystal Oscillator Previous Vectron Model VCC4

VC-801 CMOS Crystal Oscillator Previous Vectron Model VCC4 C-01 CMOS Crystal Oscillator Previous ectron Model CC4 C-01 ectron s C-01 Crystal Oscillator (XO) is a quartz stabilized square wave generator with a CMOS output. The C-01 uses fundamental or 3rd overtone

More information

VCC M CMOS Crystal Oscillator

VCC M CMOS Crystal Oscillator CC1-1545-49M1520000 CMOS Crystal Oscillator CC1 Description ectron s CC1 Crystal Oscillator (XO) is a quartz stabilized square wave generator with a CMOS output. The CC1 uses a fundamental or 3rd overtone

More information

MX-503 High Precision Microprocessor Controlled Crystal Oscillator

MX-503 High Precision Microprocessor Controlled Crystal Oscillator MX-503 High Precision Microprocessor Controlled Crystal Oscillator MX-503 Features Ultra High Stability MCXO Low Power Consumption Meets Stratum 3 acc. GR-1244 ROHS 6 Compliant Frequency Range 1 : 8-50

More information

HT-MM900A Military Temperature Oscillator

HT-MM900A Military Temperature Oscillator HT-MM900A Military Temperature Oscillator Features Performance Specifica ons Applications Frequency Range 1 MHz and 137 MHz accurate to 6 decimal places Military Applica ons Low power consump on of 4.5

More information

VX-705 Voltage Controlled Crystal Oscillator

VX-705 Voltage Controlled Crystal Oscillator X-705 oltage Controlled Crystal Oscillator X-705 Description The X-705 is a oltage Control Crystal Oscillator that operates at the fundamental frequency of the internal crystal. The crystal is a high-q

More information

VVC1 VVC2 Voltage Controlled Crystal Oscillator

VVC1 VVC2 Voltage Controlled Crystal Oscillator VVC1 VVC2 Voltage Controlled Crystal Oscillator Features The VVC1 Voltage Controlled Crystal Oscillator VCXO with a CMOS output Small 5.0 X 7.0 X 1.9 mm package Output frequencies to 66 MHz 5.0 or 3.3

More information

Performance Specifications. Frequency Stabilities 1 ( MHz) -20 to +70 C -40 to +85 C -40 to +95 C Residual error compare to fit curve

Performance Specifications. Frequency Stabilities 1 ( MHz) -20 to +70 C -40 to +85 C -40 to +95 C Residual error compare to fit curve MD-403 I2C InterfaceOven Controlled Crystal Oscillator MD-403 The MD-403 is a Vectron module that contains a medium size ovenized crystal oscillator and an I 2 C interface that communicates with an onboard

More information

VCC6-L/V 2.5 or 3.3 volt LVDS Oscillator

VCC6-L/V 2.5 or 3.3 volt LVDS Oscillator VCC6-L/V 2.5 or 3.3 volt LVDS Oscillator Features 2.5 or 3.3 V LVDS 3rd Overtone Crystal for best jitter performance Output frequencies to 270 MHz Low Jitter < 1 ps rms, 12kHz to 20MHz Enable/Disable output

More information

VX-703 Data Sheet VX-703. Voltage Controlled Crystal Oscillator Previous Vectron Model V-Type. Description. Features. Applications.

VX-703 Data Sheet VX-703. Voltage Controlled Crystal Oscillator Previous Vectron Model V-Type. Description. Features. Applications. X-703 Data Sheet oltage Controlled Crystal Oscillator Previous ectron Model -Type X-703 Description ectron s X-703 oltage Controlled Crystal Oscillator (CXO) is a quartz stabilized square wave generator

More information

VS-751 VS-751. Dual Frequency VCSO. Description. Features. Applications. Block Diagram. Vcc COutput Output SAW 1 SAW 2. Vc FS Gnd

VS-751 VS-751. Dual Frequency VCSO. Description. Features. Applications. Block Diagram. Vcc COutput Output SAW 1 SAW 2. Vc FS Gnd VS-751 Dual Frequency VCSO VS-751 The VS-751 is a SAW based voltage controlled oscillator that operates at the fundamental frequencies of the internal SAW filters. These SAW filters are high-q quartz devices

More information

Typical Applications Satellite and Deep Space Radiation Tolerance Required Severe Environmental Conditions. 10 MHz 40 MHz 10, 20 MHz

Typical Applications Satellite and Deep Space Radiation Tolerance Required Severe Environmental Conditions. 10 MHz 40 MHz 10, 20 MHz EX-209 Hi-Reliability Evacuated Miniature Crystal Oscillator EX-209 Features 16 pin Double Dip Package Ruggedized hybrid thick film construction Low Power Consumption Legacy Model: EX-245 Typical Applications

More information

VC-708 VC-708. LVPECL, LVDS Crystal Oscillator Data Sheet Ultra Low Phase Noise. Description

VC-708 VC-708. LVPECL, LVDS Crystal Oscillator Data Sheet Ultra Low Phase Noise. Description C-708 LPECL, LDS Crystal Oscillator Data Sheet Ultra Low Phase Noise C-708 Description ectron s C-708 Crystal Oscillator is a quartz stabilized, low phase noise, differential output oscillator which is

More information

Performance Specifications. Frequency Stabilities 1 ( 10 & 20 MHz)

Performance Specifications. Frequency Stabilities 1 ( 10 & 20 MHz) MD-223 I 2 C Interface Oven Controlled Crystal Oscillator Preleminary version MD-223 The MD-223 is a Vectron module that contains a medium size ovenized crystal oscillator and an I 2 C interface that communicates

More information

MV-9300A 1-80 MHz High Performance VCXO

MV-9300A 1-80 MHz High Performance VCXO MV-9300A 1-80 MHz High Performance VCXO Features Any frequency between 1 MHz and 80 MHz with 6 decimal places of accuracy CMOS compable output Industrial and extended commercial temperature ranges Industry-standard

More information

O-CDFEXYZXX-X-X-10MHz/100MHz Precision Ultra Low Phase Noise Dual Frequency OCXO Reference Module (DFRM)

O-CDFEXYZXX-X-X-10MHz/100MHz Precision Ultra Low Phase Noise Dual Frequency OCXO Reference Module (DFRM) O-CDFEXYZXX-X-X-10MHz/100MHz Precision Ultra Low Phase Noise Dual Frequency OCXO Reference Module (DFRM) Rev C The DFRM consists of 2 Ultra Low Phase Noise OCXO at 10 MHz and 100 MHz. The module is packaged

More information

Description. Block Diagrams. Figure 1b. Crystal-Based Multiplier w/saw

Description. Block Diagrams. Figure 1b. Crystal-Based Multiplier w/saw C-501 oltage Controlled Crystal Oscillator C-501 Description The C-501 is a voltage controlled crystal oscillator that is housed in a hermetic 14.0 x 9.0 x 4.5mm ceramic package. Depending upon the frequency

More information

SONET / SDH. Block Diagram. COutput Output XTAL HPLL. OE or NC. Figure 1 - Block Diagram

SONET / SDH. Block Diagram. COutput Output XTAL HPLL. OE or NC. Figure 1 - Block Diagram PX7 Single Frequency HPLL XO PX7 Features Features Description Applications The PX7 is a crystal oscillator, XO, based upon ectron s HPLL high performance phase locked loop frequency multiplier ASIC, that

More information

OX-400 / OX 401 Oven Controlled Crystal Oscillator

OX-400 / OX 401 Oven Controlled Crystal Oscillator OX-400 / OX 401 Oven Controlled Crystal Oscillator OX-400 / 401 Features 4-Pin Dip Fast warm-up TCXO replacement for better short term stability Frequency Range, 10 MHz to 40 MHz Standard frequencies,

More information

VSS4 series 3.3 Volt Spread Spectrum CMOS Oscillator

VSS4 series 3.3 Volt Spread Spectrum CMOS Oscillator VSS4 series 3.3 Volt Spread Spectrum CMOS Oscillator Features CMOS output Output frequencies to 168 MHz Tri-state output for board test and debug -10/70 or 40/85 C operating temperature Gold over nickel

More information

MD-261 MD-261. Features. Applications. Block Diagram. GNSS (GPS and GLONASS) Disciplined Oscillator Module

MD-261 MD-261. Features. Applications. Block Diagram. GNSS (GPS and GLONASS) Disciplined Oscillator Module MD-261 GNSS (GPS and GLONASS) Disciplined Oscillator Module MD-261 The MD-261 is a fully integrated GNSS disciplined oscillator module in a compact surface mount 25 x 20 mm package. The module has an embedded

More information

VCC4 series 1.8, 2.5, 3.3, 5.0 volt CMOS Oscillator

VCC4 series 1.8, 2.5, 3.3, 5.0 volt CMOS Oscillator CC series 1., 2.5,., 5.0 volt CMOS Oscillator Features CMOS output Output frequencies to 125 MHz Low jitter, Fundamental or rd OT Crystal Tristate output for board test and debug 10/70 or 0/5 C operating

More information

Description. Block Diagram. Complementary Output. Output. Crystal. Oscillator E/D

Description. Block Diagram. Complementary Output. Output. Crystal. Oscillator E/D X-700 oltage Controlled Crystal Oscillator Previous ectron Model C-710 X-700 The X-700 is a oltage Controlled Crystal Oscillator that operates at the fundamental frequency of the internal HFF crystal.

More information

Description. Block Diagram LD (10) VMON (5) Phase Detector & LD (9) FIN 4 CFOUT 1 GND (3, 7, 11, 12) Figure 1. Functional block diagram

Description. Block Diagram LD (10) VMON (5) Phase Detector & LD (9) FIN 4 CFOUT 1 GND (3, 7, 11, 12) Figure 1. Functional block diagram FX-424 Low Jitter Frequency Translator FX-424 The FX-424 is a precision quartz-based frequency translator used to translate an input frequency such as 8 khz, 1.544 MHz, 2.048 MHz, 19.44 MHz etc. to any

More information

Stability as AXIOM9000 plus low noise high isolation frequency distribution amplifier with 4 to 16 outputs

Stability as AXIOM9000 plus low noise high isolation frequency distribution amplifier with 4 to 16 outputs in Specification AXIOM9000 Rev.: 1 Date: 2016-07-01 Oscillator type: Very High Stability Ultra-Low Noise Reference (D)OCXO in 19 rack (1 HU) with up to 3 outputs Features: Very High Frequency Stability

More information

High Temperature Electronics

High Temperature Electronics High Temperature Electronics High Temperature Electronics Crystal Oscillators Packaged Quartz Crystals Real Time Clocks Electronic Module Products www.vectron.com Our Heritage With over 50 years experience

More information

Package Type: 0 Through Hole Supply Voltage: V V V Logic: HCMOS Sine Wave

Package Type: 0 Through Hole Supply Voltage: V V V Logic: HCMOS Sine Wave Description Q-Tech s High Stability OCXO is a high reliability signal generator that provides an HCMOS or Sine Wave output. The OCXO is available in a Through hole package. A flexible design allows Q-Tech

More information

VCC6-Q/R Series 2.5 and 3.3 volt LVPECL Crystal Oscillator

VCC6-Q/R Series 2.5 and 3.3 volt LVPECL Crystal Oscillator CC6-Q/R Series 2.5 and 3.3 volt LPECL Crystal Oscillator Features 2.5 or 3.3 LPECL 3 rd Overtone Crystal for best jitter performance Output frequencies to 270 MHz 0.2pS rms jitter, 12kHz-20MHz,155.52MHz

More information

Low-G 222 Series OCXO

Low-G 222 Series OCXO Low-G 222 Series OCXO The 222 Series is a rugged Oven Controlled Crystal Oscillator ideal for demanding military applications such as UAVs, rotorcraft, and tracked vehicles as well as harsh industrial

More information

Block Diagram. COutput Output XTAL HPLL. Vc OE Gnd. Figure 1 - Block Diagram

Block Diagram. COutput Output XTAL HPLL. Vc OE Gnd. Figure 1 - Block Diagram X7 Single Frequency HPLL CXO X7 Features Features Description Applications The X7 is a voltage controlled crystal oscillator, CXO, based upon ectron s HPLL high performance phase locked loop frequency

More information

VCA1 series 3.3, 5.0 volt CMOS Oscillator

VCA1 series 3.3, 5.0 volt CMOS Oscillator CA1 series 3.3, 5.0 volt CMOS Oscillator Features CMOS output Output frequencies to 160 MHz Tristate output for board test and debug 0/70 or 40/85 C operating temperature Product is compliant to RoHS directive

More information

OD100LP-Series Low Phase Noise

OD100LP-Series Low Phase Noise OD100LP-Series Low Phase Noise VCOCXO1 Description: The Connor-Winfield OD100LP-series is a low phase noise VCOCXO in a 1x1 inch metal package. The OD100LP-series is designed for those applications that

More information

Lead Finish: T = Standard S = Solder Dip (**) Package Type: 0 = DIP-14 1 = SMD 2 = Gull Wing Supply Voltage: 3 = +3.3V 5 = +5.0V

Lead Finish: T = Standard S = Solder Dip (**) Package Type: 0 = DIP-14 1 = SMD 2 = Gull Wing Supply Voltage: 3 = +3.3V 5 = +5.0V Description The Q-Tech Analog TCXO encompasses state-of-the-art oscillators with low phase noise, jitter, and tight temperature stability. The TCXO is available in a DIP (QT3003), SMD (QT3013) or Gull

More information

OX-249 Space Qualified Oven Controlled Crystal Oscillator (OCXO)

OX-249 Space Qualified Oven Controlled Crystal Oscillator (OCXO) Common Characteristics [all frequencies and options] Supply voltage 4.75 5.0 5.25 VDC Power consumption (in air) Frequency vs. Temperature (ref. frequency at 60 minutes) Warm-up Accuracy @+25 C, (ref.

More information

O-CS22-HH-0XYZXX-X-X-X-X Series Precision Ultra Low Phase Noise OCXO in Low Profile 22x25x10 mm SMD package

O-CS22-HH-0XYZXX-X-X-X-X Series Precision Ultra Low Phase Noise OCXO in Low Profile 22x25x10 mm SMD package O-CS22-HH-0XYZXX-X-X-X-X Series Precision Ultra Low Phase Noise OCXO in Low Profile 22x25x10 mm SMD package Product Data Sheet Rev E Features SC-cut crystal High Stability Low Profile (10 mm) SMD package

More information

Low Noise Oscillator series LNO 4800 B MHz

Low Noise Oscillator series LNO 4800 B MHz Specific request can be addressed to RAKON hirel@rakon.com Product Description LNO 4800 B3 is a low noise oscillator generating an output signal at 4800 MHz. It is composed by an OCSO (Oven Controlled

More information

C

C Typical Applications Base Stations Test Equipment Synthesizers Digital Switching Features Surface Mount Package Optional Reflow Process Compatible Optional AT-Cut and SC-Cut Crystal Options Low Profile

More information

O-CXM-XXYZXX-X-X-XX-X Precision Ultra Low Phase Noise OCXO in 36x27 mm Europack with optional Adapter to 2 x2

O-CXM-XXYZXX-X-X-XX-X Precision Ultra Low Phase Noise OCXO in 36x27 mm Europack with optional Adapter to 2 x2 Product Data Sheet Rev K O-CXM-XXYZXX-X-X-XX-X Precision Ultra Low Phase Noise OCXO in 36x27 mm Europack with optional Adapter to 2 x2 Description O-CX Series is based on Ultra Low Noise 10 MHz reference

More information

Low Noise Oscillator series LNO 100 OCXO LNO 100

Low Noise Oscillator series LNO 100 OCXO LNO 100 Specific request can be addressed to RAKON info@rakon.fr Product Description This Low Noise Oven Controlled Crystal Oscillator available in different footprints from 38x38x22 mm (1.5 x1.5 x0.8 ) till 25x22x12

More information

VCO-600A Voltage Controlled Saw Oscillator

VCO-600A Voltage Controlled Saw Oscillator Product Data Sheet Not Recommended For New Designs Voltage Controlled Saw Oscillator Features The VCO600A Voltage Controlled SAW Oscillator Output Frequency @ 155 MHz to 1 GHz Low jitter, 3pS rms for 622.080

More information

Flight Model (FM) Lot Acceptance Test Model (LAT) Quartz Crystal. Synthetic HiQ Quartz, SC-cut, HC-35/U 4-point

Flight Model (FM) Lot Acceptance Test Model (LAT) Quartz Crystal. Synthetic HiQ Quartz, SC-cut, HC-35/U 4-point in Specification AXIOM75SH Rev.: 1 Date: 2018-02-16 Oscillator type: Low Phase Noise OCXO for Space Application (COTS version) Features: Lower cost Commercial Off-The-Shelf version (COTS) Qualified according

More information

CXOLAT CXOLAT 1.8V CXOLAT 2.5V CXOLAT 3.0V CXOLAT 3.3V

CXOLAT CXOLAT 1.8V CXOLAT 2.5V CXOLAT 3.0V CXOLAT 3.3V CXOLAT he CXOLAT 32.768kHz surface-mount oscillator achieves the low power comparable with a tuning fork design and the fast start-up and tight frequency stability attained by an AT cut crystal design.

More information

VVC4 Voltage Controlled Crystal Oscillator

VVC4 Voltage Controlled Crystal Oscillator C4 oltage Controlled Crystal Oscillator Features ectron s Smallest CXO, 5.0 X 3.2 X 1.2 mm High Frequencies to 77.70 MHz 5.0 or 3.3 operation Linearity 10% Tri-State Output for testing Low jitter < 1ps

More information