VX-500 Voltage Controlled Crystal Oscillator
|
|
- Amberlynn Sutton
- 6 years ago
- Views:
Transcription
1 VX-00 Voltage Controlled Crystal Oscillator VX-00 Features 9x14 J-Leaded Surface Mount Package ACMOS, TTL and LVPECL Available with 4 point crystal mount for Harsh Environment Applicatio Military Temperature Range Option Frequency Range: 1 MHZ to 800 MHZ Previous Model: C300, MC044, MC344, MC046, MC346, MC047, MC347, MC049, MC349, MC048, MC318, MC328, and MC348 vs. operating temperature range (absolute pull range) Frequency Stabilities C C C vs. supply voltage change ppm Vs ± vs. load change ppm Load ± vs aging / 1 year - ±3 + ppm vs aging / year (following years) ppm Supply Voltage (Vs) Supply voltage Current coumption Supply voltage Current coumption Performance Specificatio ACMOS/TTL 1 to 23.9 MHz ACMOS/TTL 24 to 49.9 MHz ACMOS/TTL 0 to 80.0 MHz LVPECL No load ACMOS 1.0 to MHz ACMOS 1.0 TO 39.9 MHz ACMOS.0 TO 9.9 MHz ACMOS.0 TO 79.9 MHz ACMOS 80.0 to 12.0 MHz LVPECL No load 1 of
2 Performance Specificatio RF Output ACMOS Load 1 0 pf Level (Vol) Vs=.0V and 1pF load Vs= 3.3V and 1pF load Level (Voh Vs=.0V and 1pF load Vs= 3.3V and 1pF load Rise and fall times for ACMOS (measured 10 to 90) to 23.9 MHz 24.0 to 79.7 MHz 80.0 to 12.0 MHz Duty cycle 0 < 1 0 >= 1 MHz TTL Load 10 pf Level (Vol) 0. Level (Voh +4. Rise and fall times for TTL (measured 0.8V to 2.0V) to 23.9 MHz 24.0 to 12.0 MHz Duty cycle 1.4V < 1 1.4V >= 1 MHz PECL/LVPECL Load 0 ohm Into Vs-2V or There in Equivalent Level (Vol) Vs Level (Voh Vs Rise and fall times (measured 20 to 80) <100 MHz >100 MHz Start-up Time 10 ms Duty cycle (LVPECL) 0 0 Vdd Jitter (rms) 1 BW = 10Hz to 20 MHz BW = 12 khz to 20 MHz Period Jitter (pk-pk) 10,000 samples- Rising edge Frequency Tuning (EFC) Absolute Pull Range ±30 ±0 ppm ppm Linearity 10 1 Tuning Slope Positive Control Voltage Range with Vs=.0 with Vs=3.3 Additional Parameters Phase Noise 3 (@ 2 MHz) Hz 100 Hz 1 KHz 10 KHz 100 KHz 2 of
3 Phase Noise 3 (@ 1.2 MHz) Screening Performance Specificatio Vectron Verification or Class B Scrrening I/A/W MIL-PRF310 Standard Environmentals 10 Hz 100 Hz 1 khz 10 KHz 100 KHz Vibration Shock Acceleration Temperature Cycling Thermal Shock Solderability Leak Test (Fine and Gross) MIL-STD-202,Method 204, Condition G (30G, 10Hz-2000Hz) MIL-STD-202, Method 213, Condition I (100G. 6ms, Sawtooth) MIL-STD-883, Method 2001, Condition A (000G, Y1 Plane) MIL-STD-883, Method 1010, Condition B MIL-STD-202, Method 107, Condition B MIL-STD-202, Method 208 MIL-STD-883, Method 1014, Condition A1 and C1 Weight <2.0 g Processing & Packing Output Enable 6 Logic 0 input = Outputs disabled (Tri-state) Logic 1 or fl oating input = Outputs enabled) Logic 0 or fl oating input = Outputs enabled Logic 1 input = Outputs disabled (Tri-state) Absolute Maximum Ratings Handling & processing note ACMOS/TTL Output PECL/LVPECL Output Supply voltage (Vs) 7.0 V with Vs=.0 and 3.3 Operable temperature range C Storage temperature range C Outline Drawing / Enclosure 3 of
4 Outline Drawing / Enclosure Type A (ACMOS/TTL) Code Height H Pin Length Pin Connectio 2 Ground (Case) 3 RF Output 4 Supply Type B (ACMOS/TTL) Code Height H Stand-off Type B (PECL/LVPECL) Code Height H Stand-off Pin Connectio 2 Enable/Disable or N/C 3 Ground (Case) 4 RF Output N/C 6 Supply Voltage Pin Connectio 2 Enable/Disable or N/C 3 Ground (Case) 4 RF Output Complementary Output 6 Supply Voltage 4 of
5 Ordering Information VX D A T - K X X X - 10M Product Family VX: VCXO Package 9 x 14 mm Option Code X: No Option Frequency Height 0: A 3.68mm (4 lead) 1: B 3.68mm (6 lead) Supply Voltage D: Vdc E: 3.3 Vdc Enable X: No Enable Screening Option X: No Screening RF Output Code A: ACMOS B: TTL C: PECL/LVPECL Temperature Range E: - +8 C T: C Pullability Code G: ±30ppm K: ±0ppm Notes: 1. Contact factory for improved stabilities or additional product optio. Not all optio and codes are available at all frequencies. 2. Unless other stated all values are valid after warm-up time and refer to typical conditio for supply voltage, frequency control voltage, load, temperature (2 C). 3. Phase noise degrades with increasing output frequency. 4. Subject to technical modification.. Contact factory for availability. For Additional Information, Please Contact USA: 267 Lowell Road, Unit 102 Hudson, NH 0301 Tel: Fax: Europe: Landstrasse, D Neckarbischofsheim, Germany Tel: +49 (0) Fax: +49 (0) Asia: 68 Yin Cheng Road(C), 22nd Floor One LuJiaZui Pudong, Shanghai , China Tel: Fax: Disclaimer reserves the right to make changes to the product(s) and or information contained herein without notice. No liability is assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information. of Rev: 1/20/201 JV
Performance Specifications. Parameter Min Typ Max Units Condition. ppm ppm ppm ppm ppm ppm ppm ppm ppm ppm ppm ppm ppm ppm ppm ppm ppm
PX-360 Precision Crystal Oscillator PX-360 Features Frequency: 1MHz to 80 MHz 20 Lead Flatpack package Package equivalent of MIL-PRF-55310/21 4-Point resonator mount for high shock & vibration performance
More informationPX-422 Hybrid TTL Clock Oscillator
PX-422 Hybrid TTL Clock Oscillator PX-422 Features Applicatio Frequency: 1 to 80 MHz 40-Pad Leadless Chip Carrier (LCC) Package equivalent of MIL-PRF-55310/19 Surface Mount, Low Profile Output Option:
More informationPX-421 Crystal Oscillator
PX-421 Crystal Oscillator PX-421 PX-421 PX-421 PX-421 Features Frequency: 10 KHz to 125 MHz 4 Pin 1/2 DIP Package with Through Hole and SMD lead optio Fully RoHS Compliant * No pure tin is used in this
More informationVX-503 Voltage Controlled Crystal Oscillator
VX3 Voltage Controlled Crystal Oscillator VX3 Features Description The VX3 voltage controlled crystal oscillator expands VI s advanced VCXO performance capabilities while adhering to a package footprint
More informationPerformance Specifications
TX-502 Temperature Compensated Crystal Oscillator High Precision TX-502 Features High Precision TCXO OCXO Replacement OCXO Temperature Performance Low power consumption Tight Tolerances Frequency range
More informationOX-200 Oven Controlled Crystal Oscillator
OX-200 Oven Controlled Crystal Oscillator OX-200 Features Reflow Process Compatible AT-Cut and SC-Cut Crystal Options Low Profile Compact Package Applications Base Stations Test Equipment Synthesizers
More informationVX-990 Voltage Controlled Crystal Oscillator Ultra Low Noise and G-Sensitivity
VX-990 Voltage Controlled Crystal Oscillator Ultra Low Noise and G-Sensitivity VX-990 Ultra low Phase Noise Ultra low G-Sensitivity Vibration hardened Tight Tolerances Frequency Range Standard Frequency
More informationTX-500 Temperature Compensated Crystal Oscillator
TX-500 Temperature Compensated Crystal Oscillator TX-500 Features Low Phase Noise Low power consumption Output: HCMOS, Clipped Sinewave, PECL, True Sinewave Tight Tolerances Frequency range 1 of 6.4-160
More informationPX-990 Crystal Oscillator Ultra Low Noise and G-Sensitivity
PX-990 Crystal Oscillator Ultra Low Noise and G-Sensitivity PX-990 Ultra low Phase Noise Ultra low G-Sensitivity Vibration hardened Tight Tolerances Frequency Range Standard Frequency Features 60-120MHz
More informationPerformance Specifications
OX-208 Oven Controlled Crystal Oscillator OX-208 OX-208 The OX-208 is a high stability ovenized crystal oscillator in a 25 x 25 mm package, capable of aging rates of 0.15 /day and temperature stabilities
More informationVX-505 Voltage Controlled Crystal Oscillator Extended Temperature
VX-505 Voltage Controlled Crystal Oscillator Extended Temperature VX-505 Features AT-Cut Crystal Surface Mount FR4 based package Reflow Process Compatible Extended temperature range -55..+125 C Low Tight
More informationVX-706 Voltage Controlled Crystal Oscillator
VX-706 Voltage Controlled Crystal Oscillator VX-706 Features AT-Cut Crystal Surface Mount FR4 based package Single layer Reflow Process Compatible Low & Jitter Tight Stabilities Frequency Range 40-300MHz
More informationTX-705 Temperature Compensated Crystal Oscillator
TX-705 Temperature Compensated Crystal Oscillator TX-705 Features Applications The TX-705 is a TCXO family designed for applications where superior g-sensitivity and good phase noise together with small
More informationOX-171 Oven Controlled Crystal Oscillator
OX-171 Oven Controlled Crystal Oscillator OX-171 The OX-171 is a high stability ovenized crystal oscillator in a 28 x 38 mm package, capable of aging rates of 0.06 /day and temperature stabilities of 1
More informationPS-701 SAW Oscillator
PS-701 SAW Oscillator PS-701 The PS-701 SO (Saw Oscillator from Vectron is a high frequency, ultra low phase noise oscillator designed to support high speed data converters and 100G / 400G coherent optical
More informationVX-701 Voltage Controlled Crystal Oscillator
VX-701 Voltage Controlled Crystal Oscillator VX-701 Features AT-Cut Crystal Surface Mount FR4 based package Reflow Process Compatible Low Tight Stabilities Frequency Range 16-200MHz Standard Frequencies
More informationMX-600 Microprocessor Controlled Crystal Oscillator High Precision
MX-600 Microprocessor Controlled Crystal Oscillator High Precision MX-600 Features Ultra High Stability MCXO Low Power Consumption Meets Stratum 3 acc. GR-1244 ROHS 6 Compliant Frequency Range 1 : 8-40
More informationVS-504 Dual Frequency VCSO High Frequency
VS-504 Dual Frequency VCSO High Frequency VS-504 The VS-504 dual frequency VCSO (Voltage Controlled Saw Oscillator from Vectron is a high frequency, ultra low phase noise oscillator designed to support
More informationOX-175 Ultra Low Noise Oven Controlled Crystal Oscillator
OX-175 Ultra Low Noise Oven Controlled Crystal Oscillator OX-175 The OX-175 is a low phase noise, high-frequency ovenized crystal oscillator in a 28 x 38 mm package. The oscillator has a noise floor of
More informationPerformance Specifications. Frequency Stabilities Supply Voltage (Vs) ma ma. RF Output
TX-309 Hi-Rel Temperature Compensated Crystal Oscillator TX-309 Features Radiation Tolerant Small footprint Frequency Range: 0.3 MHZ to 150 MHZ Previous Model: C2501 Applications Reference clock for space
More informationMX-503 Microprocessor Controlled Crystal Oscillator High Precision
MX-503 Microprocessor Controlled Crystal Oscillator High Precision MX-503 Features Ultra High Stability MCXO Low Power Consumption Meets Stratum 3 acc. GR-1244 ROHS 6 Compliant Frequency Range 1 : 8-50
More informationTX-707 Low g-sensitivity Temperature Compensated Crystal Oscillator
TX-707 Low g-sensitivity Temperature Compensated Crystal Oscillator TX-707 The TX-707 Series TCXO combines innovative manufacturing and the latest technology to provide low phase noise and excellent g-sensitivity.
More informationVS-507 Voltage Controlled SAW Oscillator
VS-507 Voltage Controlled SAW Oscillator VS-507 Description The VS-507 VCSO (Voltage Controlled Saw Oscillator from Vectron is an ultra high frequency, ultra low phase noise oscillator. The VS-507 provides
More informationTX-801 Temperature Compensated Crystal Oscillator
TX-801 Temperature Compensated Crystal Oscillator TX-801 Features Applications The TX-801 TCXO provides fully compliant Stratum 3 levels of stability in a 5x3.2mm package. It is ideal for timing over IP
More informationEX-421 Evacuated Miniature Crystal Oscillator
EX-421 Evacuated Miniature Crystal Oscillator EX-421 Description The EX-421 provides exceptionally low aging rates and tight temperature stabilities in an extremely small package over a wide range of environmental
More informationTX-700 Temperature Compensated Crystal Oscillator
TX-700 Temperature Compensated Crystal Oscillator Features EFC Standard Small Size 0% RoHS Compliant Low Profile range of 6.4-52 MHz Standard Frequencies:, 12.8, 16.384, 19.44, 20, 20.48 MHz Applications
More informationOX-221 Oven Controlled Crystal Oscillator
OX-221 Oven Controlled Crystal Oscillator OX-221 Features Surface Mount package SC_CUT Crystal Low Profile Compact Package standard frequency: 1, 2, 3.72 MHz Applications Base stations Test equipment Synthesizers
More informationPX-570 High Temperature Crystal Oscillator
PX-570 High Temperature Crystal Oscillator PX-570 Vectron offers a High Temperature Crystal Oscillator (PX-570) product platform for extreme environment applications. In addition to its wide operating
More informationVX-805 Voltage Controlled Crystal Oscillator
VX-805 Voltage Controlled Crystal Oscillator VX-805 Description The VX-805 is a Voltage Control Crystal Oscillator that operates at the fundamental frequency of the internal crystal. The crystal is a high-q
More informationPerformance Specifications
OX-280 Oven Controlled Crystal Oscillator OX-280 Features Surface Mount Package AT-CUT and SC_CUT Crystal Options Low Profile Compact Package Compact Package Applications Base stations Test equipment Synthesizers
More informationVT-860 Temperature Compensated Crystal Oscillator
VT-860 Temperature Compensated Crystal Oscillator VT-860 Description Vectron s VT-860 Temperature Compensated Crystal Oscillator (TCXO) is a quartz stabilized, Clipped sine wave output, analog temperature
More informationMD-403 I2C InterfaceOven Controlled Crystal Oscillator
MD-43 I2C InterfaceOven Controlled Crystal Oscillator MD-43 The MD-43 is a Vectron module that contains a medium size ovenized crystal oscillator and an I 2 C interface that communicates with an onboard
More informationPX-702 PX-570 PX-420
High Temperature Low Power Real Time Clock Crystal Oscillators PX-702 PX-570 PX-420 Vectron offers a High Temperature Low Power Real Time Clock Crystal Oscillator (HT RTC XO) product platform for extreme
More informationVVC1 VVC2 Voltage Controlled Crystal Oscillator
VVC1 VVC2 Voltage Controlled Crystal Oscillator Features The VVC1 Voltage Controlled Crystal Oscillator VCXO with a CMOS output Small 5.0 X 7.0 X 1.9 mm package Output frequencies to 66 MHz 5.0 or 3.3
More informationVT-800 Temperature Compensated Crystal Oscillator Previous Vectron Model VTC4
VT-800 Temperature Compensated Crystal Oscillator Previous Vectron Model VTC4 VT-800 Description Vectron s VT-800 Temperature Compensated Crystal Oscillator (TCXO) is a quartz stabilized, clipped sine
More informationHT RTCXO High Temperature Low Power Real Time Clock Crystal Oscillators
HT RTCXO High Temperature Low Power Real Time Clock Crystal Oscillators PX-702 PX-570 PX-420 Vectron offers a High Temperature Low Power Real Time Clock Crystal Oscillator (HT RTCXO) product platform's
More informationVC-801 CMOS Crystal Oscillator Previous Vectron Model VCC4
C-01 CMOS Crystal Oscillator Previous ectron Model CC4 C-01 ectron s C-01 Crystal Oscillator (XO) is a quartz stabilized square wave generator with a CMOS output. The C-01 uses fundamental or 3rd overtone
More informationVTC2 Series Voltage Controlled Temperature Compensated Crystal Oscillator
VTC2 Series Voltage Controlled Temperature Compensated Crystal Oscillator Features CMOS Square Wave Output Enable Disable Feature Output Frequencies to 30 MHz Fundamental Crystal Design Optional VCXO function
More informationMHz. Performance Specifications
VX-501-0276-245M76 Preliminary version: Subject to technical modification. VCXO VX-501-0276-245M76 Nominal frequency (f0) 245.76 MHz Performance Specifications Frequency stabilities vs. operating temp.
More informationVC-708 VC-708. LVPECL, LVDS Crystal Oscillator Data Sheet Ultra Low Phase Noise. Description
C-708 LPECL, LDS Crystal Oscillator Data Sheet Ultra Low Phase Noise C-708 Description ectron s C-708 Crystal Oscillator is a quartz stabilized, low phase noise, differential output oscillator which is
More informationVC-820 CMOS Crystal Oscillator
C-20 CMOS Crystal Oscillator C-20 ectron s C-20 Crystal Oscillator (XO) is a quartz stabilized square wave generator with a CMOS output. The C-20 uses a fundamental or a 3rd overtone crystal, oscillating
More informationVV-701 Voltage Controlled Crystal Oscillator Previous Vectron Model VVC1/VVC2
-701 oltage Controlled Crystal Oscillator Previous ectron Model C1/C2-701 Description ectron s -701 oltage Controlled Crystal Oscillator (CXO) is a quartz stabilized square wave generator with a CMOS output.
More informationVC-827 Differential (LVPECL, LVDS) Crystal Oscillator
C-827 Differential (LPECL, LDS) Crystal Oscillator C-827 Description ectron s C-827 Crystal Oscillator is a quartz stabilized, differential output oscillator, operating off a 2.5 or 3.3 volt power supply
More informationHT-MM900A Military Temperature Oscillator
HT-MM900A Military Temperature Oscillator Features Performance Specifica ons Applications Frequency Range 1 MHz and 137 MHz accurate to 6 decimal places Military Applica ons Low power consump on of 4.5
More informationVC-711 Differential (LVPECL, LVDS) Crystal Oscillator
C-7 Differential (LPECL, LDS) Crystal Oscillator C-7 Description ectron s C-7 Crystal Oscillator is a quartz stabilized, differential output oscillator, operating off either a 2.5 or 3.3 volt power supply
More informationVT-501 Temperature Compensated Crystal Oscillator Previous Vectron Model VTD3
T-501 Temperature Compensated Crystal Oscillator Previous ectron Model TD3 T-501 Description ectron s T-501 Temperature Compensated Crystal Oscillator (TCXO) is a quartz stabilized, CMOS output, analog
More informationVT-701 Temperature Compensated Crystal Oscillator Previous Vectron Model VTC2
T-701 Temperature Compensated Crystal Oscillator Previous ectron Model TC2 T-701 Description ectron s T-701 Temperature Compensated Crystal Oscillator (TCXO) is a quartz stabilized, clipped sine wave output,
More informationVCC6-L/V 2.5 or 3.3 volt LVDS Oscillator
VCC6-L/V 2.5 or 3.3 volt LVDS Oscillator Features 2.5 or 3.3 V LVDS 3rd Overtone Crystal for best jitter performance Output frequencies to 270 MHz Low Jitter < 1 ps rms, 12kHz to 20MHz Enable/Disable output
More informationVTC4 series Voltage Controlled Temperature Compensated Crystal Oscillator
VTC4 series Voltage Controlled Temperature Compensated Crystal Oscillator Features Clipped Sine Wave Output Output Frequencies to 27 MHz Fundamental Crystal Design Optional VCXO Function available Gold
More informationVX-705 Voltage Controlled Crystal Oscillator
X-705 oltage Controlled Crystal Oscillator X-705 Description The X-705 is a oltage Control Crystal Oscillator that operates at the fundamental frequency of the internal crystal. The crystal is a high-q
More informationDescription. Block Diagram. Complementary Output. Output. Crystal. Oscillator. E/D or NC
CC6 LPECL, LDS Crystal Oscillator Data Sheet CC6 Description ectron s CC6 Crystal Oscillator is a quartz stabilized, differential output oscillator, operating off either a 2.5 or 3.3 volt supply, hermetically
More informationVS-708 Single Frequency VCSO
VS-708 Single Frequency VCSO VS-708 Description The VS-708 is a Voltage Controlled SAW Oscillator that operates at the fundamental or a fraction of the internal SAW filter frequency. The SAW component
More informationMV-9300A 1-80 MHz High Performance VCXO
MV-9300A 1-80 MHz High Performance VCXO Features Any frequency between 1 MHz and 80 MHz with 6 decimal places of accuracy CMOS compable output Industrial and extended commercial temperature ranges Industry-standard
More informationNote. Figure1. The Temperature Stability ranges of various oscillator types
Tutorial on TCXOs Introduction to TCXOs Helping Customers Innovate, Improve & Grow Note Application Note TCXOs are necessary when a level of temperature stability is required that cannot be reached by
More informationVCC M CMOS Crystal Oscillator
CC1-1545-49M1520000 CMOS Crystal Oscillator CC1 Description ectron s CC1 Crystal Oscillator (XO) is a quartz stabilized square wave generator with a CMOS output. The CC1 uses a fundamental or 3rd overtone
More informationVS-800 Ultra-Low Jitter High Frequency VCSO
VS-800 Ultra-Low Jitter High Frequency VCSO VS-800 Description The VS-800 is a Voltage Controlled SAW Oscillator that operates at the fundamental frequency of the internal SAW resonator. The SAW resonator
More informationOX-204 at 10 MHz Ultra Low Phase Noise Oven Controlled Crystal Oscillator
OX-204 at 10 MHz Ultra Low Phase Noise Oven Controlled Crystal Oscillator OX-204 OX-204 The OX-204 is an Ultra Low Phase Noise Ovenized Crystal Oscillator with a noise floor as low as -175 dbc/hz. Designed
More informationVX-703 Data Sheet VX-703. Voltage Controlled Crystal Oscillator Previous Vectron Model V-Type. Description. Features. Applications.
X-703 Data Sheet oltage Controlled Crystal Oscillator Previous ectron Model -Type X-703 Description ectron s X-703 oltage Controlled Crystal Oscillator (CXO) is a quartz stabilized square wave generator
More informationJ-Type Voltage Controlled Crystal Oscillator
J-Type Voltage Controlled Crystal Oscillator Product is compliant to RoHS directive and fully compatible with lead free assembly Features Output Frequencies from 1.024 MHz to 170.000 MHz +3.3 or +5.0 volt
More informationVSS4 series 3.3 Volt Spread Spectrum CMOS Oscillator
VSS4 series 3.3 Volt Spread Spectrum CMOS Oscillator Features CMOS output Output frequencies to 168 MHz Tri-state output for board test and debug -10/70 or 40/85 C operating temperature Gold over nickel
More informationVCC4 series 1.8, 2.5, 3.3, 5.0 volt CMOS Oscillator
CC series 1., 2.5,., 5.0 volt CMOS Oscillator Features CMOS output Output frequencies to 125 MHz Low jitter, Fundamental or rd OT Crystal Tristate output for board test and debug 10/70 or 0/5 C operating
More informationDescription. Block Diagram LD (10) VMON (5) Phase Detector & LD (9) FIN 4 CFOUT 1 GND (3, 7, 11, 12) Figure 1. Functional block diagram
FX-424 Low Jitter Frequency Translator FX-424 The FX-424 is a precision quartz-based frequency translator used to translate an input frequency such as 8 khz, 1.544 MHz, 2.048 MHz, 19.44 MHz etc. to any
More informationVS-701 High Shock Discrete Voltage Controlled SAW Oscillator
VS-701 High Shock Discrete Voltage Controlled SAW Oscillator VS-701 The VS-701 VCSO (Voltage Controlled Saw Oscillator from Vectron is a high frequency, ultra low phase noise oscillator designed to support
More informationDescription. Block Diagrams. Figure 1b. Crystal-Based Multiplier w/saw
C-501 oltage Controlled Crystal Oscillator C-501 Description The C-501 is a voltage controlled crystal oscillator that is housed in a hermetic 14.0 x 9.0 x 4.5mm ceramic package. Depending upon the frequency
More informationFX-700 Low Jitter Frequency Translator
Product Data Sheet FX-700 Low Jitter Frequency Translator Description The FX-700 is a crystal-based frequency translator used in communications applications where low jitter is paramount. Performance advantages
More informationVCC6-Q/R Series 2.5 and 3.3 volt LVPECL Crystal Oscillator
CC6-Q/R Series 2.5 and 3.3 volt LPECL Crystal Oscillator Features 2.5 or 3.3 LPECL 3 rd Overtone Crystal for best jitter performance Output frequencies to 270 MHz 0.2pS rms jitter, 12kHz-20MHz,155.52MHz
More informationTypical Applications Satellite and Deep Space Radiation Tolerance Required Severe Environmental Conditions. 10 MHz 40 MHz 10, 20 MHz
EX-209 Hi-Reliability Evacuated Miniature Crystal Oscillator EX-209 Features 16 pin Double Dip Package Ruggedized hybrid thick film construction Low Power Consumption Legacy Model: EX-245 Typical Applications
More informationOX-249 Space Qualified Oven Controlled Crystal Oscillator (OCXO)
Common Characteristics [all frequencies and options] Supply voltage 4.75 5.0 5.25 VDC Power consumption (in air) Frequency vs. Temperature (ref. frequency at 60 minutes) Warm-up Accuracy @+25 C, (ref.
More informationVVC4 Voltage Controlled Crystal Oscillator
C4 oltage Controlled Crystal Oscillator Features ectron s Smallest CXO, 5.0 X 3.2 X 1.2 mm High Frequencies to 77.70 MHz 5.0 or 3.3 operation Linearity 10% Tri-State Output for testing Low jitter < 1ps
More informationMD-261 MD-261. Features. Applications. Block Diagram. GNSS (GPS and GLONASS) Disciplined Oscillator Module
MD-261 GNSS (GPS and GLONASS) Disciplined Oscillator Module MD-261 The MD-261 is a fully integrated GNSS disciplined oscillator module in a compact surface mount 25 x 20 mm package. The module has an embedded
More informationMX-041 Oven Controlled Crystal Oscillator
MX-041 Oven Controlled Crystal Oscillator MX-041 Features Applications SC-Cut resonator Frequency Range: 5 MHZ to 20 MHZ Low Package Height Temperature stability to 0.4 Aging rate 0.1 /day Frequency range
More informationMX-503 High Precision Microprocessor Controlled Crystal Oscillator
MX-503 High Precision Microprocessor Controlled Crystal Oscillator MX-503 Features Ultra High Stability MCXO Low Power Consumption Meets Stratum 3 acc. GR-1244 ROHS 6 Compliant Frequency Range 1 : 8-50
More informationOX-046 VHF low g-sensitivity Oven Controlled Crystal Oscillator
OX-046 VHF low g-sensitivity Oven Controlled Crystal Oscillator OX-046 Features Ultra Low G-Sensitivity Low Phase Noise Very High Frequency Frequency Range: 50 MHZ to 250 MHZ Standard Frequency: 100 MHz
More informationBlock Diagram. Figure 1. Functional Block Diagram
MD-171 High Stability GNSS (GPS and GLONASS) Disciplined Oscillator Module MD-171 The MD-171 is a Vectron GNSS disciplined module. It is a fully integrated GNSS disciplined oscillator module in a compact
More informationOX-304 at 10 MHz Ultra Low Phase Noise Oven Controlled Crystal Oscillator
OX-304 at 10 MHz Ultra Low Phase Noise Oven Controlled Crystal Oscillator OX-304 The OX-304 is an Ultra Low Phase Noise Ovenized Crystal Oscillator with a noise floor as low as -173 dbc/hz in a compact
More informationDescription. Block Diagram. Complementary Output. Output. Crystal. Oscillator E/D
X-700 oltage Controlled Crystal Oscillator Previous ectron Model C-710 X-700 The X-700 is a oltage Controlled Crystal Oscillator that operates at the fundamental frequency of the internal HFF crystal.
More informationVS-500A Voltage Controlled Saw Oscillator
Product Data Sheet VS-500A Voltage Controlled Saw Oscillator Features Output Frequencies from 155 MHz to 800 MHz Low Jitter < 1 ps rms in the 12kHz to 20MHz range < 1ps rms jitter in 50kHz to 80MHz range
More informationOX-043 Low g-sensitivity Oven Controlled Crystal Oscillator
OX-043 Low g-sensitivity Oven Controlled Crystal Oscillator OX-043 Features Applications Ultra Low g-sensitivity Low Phase Noise High Stability Frequency Range: 8 MHZ to 15 MHZ Standard Frequency 10 MHz
More informationPerformance Specifications. Frequency Stabilities 1 ( MHz) -20 to +70 C -40 to +85 C -40 to +95 C Residual error compare to fit curve
MD-403 I2C InterfaceOven Controlled Crystal Oscillator MD-403 The MD-403 is a Vectron module that contains a medium size ovenized crystal oscillator and an I 2 C interface that communicates with an onboard
More informationHigh Temperature Electronics
High Temperature Electronics High Temperature Electronics Crystal Oscillators Packaged Quartz Crystals Real Time Clocks Electronic Module Products www.vectron.com Our Heritage With over 50 years experience
More informationVCA1 series 3.3, 5.0 volt CMOS Oscillator
CA1 series 3.3, 5.0 volt CMOS Oscillator Features CMOS output Output frequencies to 160 MHz Tristate output for board test and debug 0/70 or 40/85 C operating temperature Product is compliant to RoHS directive
More informationMD-173 High Stability Coefficient Oscillator I C interface Oven Controlled Crystal Oscillator
MD-173 High Stability Coefficient Oscillator I C interface Oven Controlled Crystal Oscillator 2 MD-173 The MD-173 is a Microsemi Coefficient Oscillator (CCXO) that contains a high-stability ovenized crystal
More informationPerformance Specifications. Frequency Stabilities 1 ( 10 & 20 MHz)
MD-223 I 2 C Interface Oven Controlled Crystal Oscillator Preleminary version MD-223 The MD-223 is a Vectron module that contains a medium size ovenized crystal oscillator and an I 2 C interface that communicates
More informationVCO-600A Voltage Controlled Saw Oscillator
Product Data Sheet Not Recommended For New Designs Voltage Controlled Saw Oscillator Features The VCO600A Voltage Controlled SAW Oscillator Output Frequency @ 155 MHz to 1 GHz Low jitter, 3pS rms for 622.080
More informationV-Type Voltage Controlled Crystal Oscillator (VCXO)
Product Data Sheet V-Type Voltage Controlled Crystal Oscillator (VCXO) Features Output Frequencies to 77.760 MHz 5.0 or 3.3 volt operation Tri-State Output Jitter Performance 12MHz) VCXO
More informationVS-751 VS-751. Dual Frequency VCSO. Description. Features. Applications. Block Diagram. Vcc COutput Output SAW 1 SAW 2. Vc FS Gnd
VS-751 Dual Frequency VCSO VS-751 The VS-751 is a SAW based voltage controlled oscillator that operates at the fundamental frequencies of the internal SAW filters. These SAW filters are high-q quartz devices
More informationOX-175 Ultra Low Noise Oven Controlled Crystal Oscillator
OX-175 Ultra Low Noise Oven Controlled Crystal Oscillator OX-175 The OX-175 is a low phase noise, high-frequency ovenized crystal oscillator in a 28 x 38 mm package. The oscillator has a noise floor of
More informationSONET / SDH. Block Diagram. COutput Output XTAL HPLL. OE or NC. Figure 1 - Block Diagram
PX7 Single Frequency HPLL XO PX7 Features Features Description Applications The PX7 is a crystal oscillator, XO, based upon ectron s HPLL high performance phase locked loop frequency multiplier ASIC, that
More informationBlock Diagram. COutput Output XTAL HPLL. Vc OE Gnd. Figure 1 - Block Diagram
X7 Single Frequency HPLL CXO X7 Features Features Description Applications The X7 is a voltage controlled crystal oscillator, CXO, based upon ectron s HPLL high performance phase locked loop frequency
More informationSolder Dip Options T = Standard S = Sn60Pb40 G=SAC305. Package 86 =Leaded 80 = Formed Leads 85=SMT. VCXO model
Description Q-Tech s 5x7mm LVCMOS Voltage Controlled Crystal Oscillators consist of an IC operating at a supply voltage 3.3Vdc and a miniature strip quartz crystal that operates at the fundamental frequency.
More informationLogic & Supply Voltage: HC = HCMOS +5V L = LVHCMOS +3.3V P = LVPECL +3.3V
Description Q-Tech s surface-mount QTCV576 VCXOs consist of an IC 5Vdc,.Vdc clock square wave generator and a miniature strip AT quartz crystal built in a low profile ceramic package with gold plated contact
More informationPreliminary. 2.0 FREQUENCY CHARACTERISTICS Line Parameter Test Condition Value Unit 2.1 Frequency 8 to 1500 MHz 2.2 Operating Temperature Range
RXO5032P SMD Clock Oscillator () High Performance XO in 5 x 3.2 mm Surface Mount package Product description The RXO5032P XO combines very low RMS phase jitter and tight frequency stability in a small
More informationVCC4 series 1.8, 2.5, 3.3, 5.0 volt CMOS Oscillator
CC series 1.,.5,., 5.0 volt CMOS Oscillator Features CMOS output Output frequencies to 15 MHz Low jitter, Fundamental or rd OT Crystal Tristate output for board test and debug 10/70 or 0/5 C operating
More informationOX-400 / OX 401 Oven Controlled Crystal Oscillator
OX-400 / OX 401 Oven Controlled Crystal Oscillator OX-400 / 401 Features 4-Pin Dip Fast warm-up TCXO replacement for better short term stability Frequency Range, 10 MHz to 40 MHz Standard frequencies,
More informationS1903 and S1950 Series
Actual Size = 5 x 7mm Product Features 3.3V or 5V ACMOS/TTL compatible logic levels Very tight frequency stability available Fast clock edge rate Pin-compatible with standard 5x7mm packages Designed for
More informationCXOQ CXOQ 1.8V CXOQ 2.5V CXOQ 3.0V CXOQ 3.3V
CXOQ Statek s ultra miniature and ultra low profile CXOQ oscillators consist of a CMOS/TTL compatible hybrid circuit and a state-ofthe-art, miniature, fundamental-mode crystal. Model Name Description CXOQ
More informationLogic & Supply Voltage: HC = HCMOS +5V L = LVHCMOS +3.3V P = LVPECL +3.3V
. and 5.0Vdc -.000MHz to 56.2MHz Description Q-Tech s surface-mount QTCV56 VCXOs consist of an IC 5Vdc,.Vdc clock square wave generator and a miniature strip AT quartz crystal built in a low profile ceramic
More informationSpecification AXIOM210 Rev.: 3 Date: Oscillator type: Ultra-Low Phase Noise OCXO in Vibration-isolated Package
in Specification AXIOM210 Rev.: 3 Date: 2015-02-17 Oscillator type: Ultra-Low Phase Noise OCXO in Vibration-isolated Package Parameter min. typ. max. Unit Condition Frequency range 50 130 MHz Standard
More informationCMOS/LVCMOS HF VCXO AE-X32BXX-X Series
CMOS/LVCMOS HF VCXO Description The AE-X32BXX Series of voltage controlled crystal oscillators (VCXO) provides high frequency with CMOS/LVCMOS output. The device does not use any frequency multiplication,
More informationC
Typical Applications Base Stations Test Equipment Synthesizers Digital Switching Features Surface Mount Package Optional Reflow Process Compatible Optional AT-Cut and SC-Cut Crystal Options Low Profile
More information