PX-422 Hybrid TTL Clock Oscillator
|
|
|
- Steven Gilbert
- 6 years ago
- Views:
Transcription
1 PX-422 Hybrid TTL Clock Oscillator PX-422 Features Applicatio Frequency: 1 to 80 MHz 40-Pad Leadless Chip Carrier (LCC) Package equivalent of MIL-PRF-55310/19 Surface Mount, Low Profile Output Option: ACMOS, TTL No Pure Tin is used in this product High Shock Survival up to 20Kg Previous Model: CO-408, CO-448, MC075 Made in USA ECCN: EAR99 vs. operating temperature range (referenced to C) Initial tolerance Performance Specificatio Frequency Stabilities Low Voltage Clock Applicatio Avionics and Itrumentation Test and Measurement Equipment Navigation C C C C C 1 of 6
2 Performance Specificatio Overall tolerance (Referenced to C) (includes operating temperature and initial accuracy) vs. supply voltage change vs. load change vs. aging / 1st year vs. aging / year (following years) Supply Voltage (Vs) Supply voltage Supply voltage Current coumption (+5 ) Current coumption (+3.3 ) C C C C C VS ± 5 Load ± 5 after 30 days of operation ACMOS or TTL 1.0 to 23.9 MHz ACMOS or TTL 24 to 49.9 MHz ACMOS or TTL 50 to MHz ACMOS 1.0 to 14.9 MHZ ACMOS 15.0 to 39.9 MHZ ACMOS 40.0 to 59.9 MHZ ACMOS 60.0 to 80.0 MHZ 2 of 6
3 Signal Performance Specificatio ACMOS RF Output Load 15 pf Signal Level (Vol) Signal Level (Voh) Rise and fall times for ACMOS (measured 10 to 90) Duty cycle Signal TTL Load 10 TTL Signal Level (Vol) 0.4 Signal Level (Voh) +2.4 Rise and fall times for TTL (measured 0.8V to 2.0V) Duty cycle with Vs=5.0V and 15pF load with Vs=3.3V and 15pF load with Vs=5.0V and 15pF load with Vs=3.3V and 15pF load 1.0 to 23.9 MHz and 15pF load 24.0 to 80.0 MHz and 15pF 50 < => 15 MHz 1.0 to 23.9 MHz 24.0 to V < V >= 15 MHz Absolute Maximum Ratings Supply voltage (Vs) 7.0 V with Vs = 5.0 and 3.3 Operable temperature range C Storage temperature range C Screening Vectron Verification Class B, MIL-PRF Additional Parameters Standard Environmentals Vibration MIL-STD-202, Method 204, Condition D (20 G, 10Hz-2000Hz) Shock MIL-STD-202, Method 213, Condition I (100 G, 6ms, Sawtooth) Acceleration MIL-STD-883, Method 2001, Condition A (5000 G, Y1 Plane) Temperature Cycling MIL-STD-883, Method 1010, Condition B Thermal Shock MIL-STD-883, Method 107, Condition B Solderability MIL-STD-202, Method 208 Leak Test (Fine and Gross) MIL-STD-883, Method 1014, Condition A1 and C1 3 of 6
4 Outline Drawing / Enclosure Recommended Reflow Profile Dimeio in inches Height Code Height H Pin Length L NA Pin Connectio 4 Supply 10 Supply 31 Ground 37 Ground 39 Output others all others have no internal connection 4 of 6
5 Ordering Information PX D A T - F K X B - 10M Product Family PX: PXO Package 13 x 13 mm Enclosure 0: height 1: height with solder coated leads Supply Voltage D: 5.0 Vdc E: 3.3 Vdc RF Output Code A: ACMOS B: TTL Temperature Range A: -55 C to +85 C B: -55 C to +105 C C: -55 C to +125 C E: -40 C to +85 C T: 0 C to +70 C Enable Code X: No Enable Frequency Screening Option B: MIL-PRF B Level X: No Screening Temperature Stability Code ( Reference to Table: I ) D: ±15 F: ±25 K: ±50 P: ±80 S: ±100 Z: ±65PPM X: Use with Overall Tolerance Code Accuracy 25 C or Overall Temp Stability Code D: ±15 ( Reference to Table: II ) F: ±25 K: ±50 P: ±80 S: ±100PPM Z: ±65PPM Available Temperature Stability Code Temp Range Temp Stability A: -55 C to +85 C K: ± 50 Z ± 65 B: -55 C to +105 C P ± 80 C: -55 C to +125 C S ± 100 F: ± 25 K: ± 50 E: -40 C to +85 C Z ± 65 P ± 80 S ± 100 D: ± 15 F: ± 25 K: ± 50 T: 0 C to +70 C Z ± 65 P ± 80 S ± 100 Table: I Available Overall Tolerance Code Temp Range Overall Tolerance Temp Stability A: -55 C to +85 C Z: ± 65 X B: -55 C to +105 C P: ± 80 X C: -55 C to +125 C S: ± 100 X K: ± 50 X Z: ± 65 X E: -40 C to +85 C P: ± 80 X S: ± 100 X F: ± 25 X K: ± 50 X T: 0 C to +70 C Z: ± 65 X P: ± 80 X S: ± 100 X Table: II 5 of 6
6 This Page Intentionally Left Blank Notes: 1. Contact factory for improved stabilities or additional product optio. Not all optio and codes are available at all frequencies. 2. Subject to technical modification. 3. Contact factory for custom requirements. For Additional Information, Please Contact USA: Vectron International 267 Lowell Road, Unit 102 Hudson, NH Tel: Fax: Europe: Vectron International Landstrasse, D Neckarbischofsheim, Germany Tel: +49 (0) Fax: +49 (0) Asia: Vectron International 68 Yin Cheng Road(C), 22nd Floor One LuJiaZui Pudong, Shanghai , China Tel: Fax: Disclaimer Vectron International reserves the right to make changes to the product(s) and or information contained herein without notice. No liability is assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information. 6 of 6 Rev: 8/11/2016 JV
Performance Specifications. Parameter Min Typ Max Units Condition. ppm ppm ppm ppm ppm ppm ppm ppm ppm ppm ppm ppm ppm ppm ppm ppm ppm
PX-360 Precision Crystal Oscillator PX-360 Features Frequency: 1MHz to 80 MHz 20 Lead Flatpack package Package equivalent of MIL-PRF-55310/21 4-Point resonator mount for high shock & vibration performance
PX-421 Crystal Oscillator
PX-421 Crystal Oscillator PX-421 PX-421 PX-421 PX-421 Features Frequency: 10 KHz to 125 MHz 4 Pin 1/2 DIP Package with Through Hole and SMD lead optio Fully RoHS Compliant * No pure tin is used in this
VX-500 Voltage Controlled Crystal Oscillator
VX-00 Voltage Controlled Crystal Oscillator VX-00 Features 9x14 J-Leaded Surface Mount Package ACMOS, TTL and LVPECL Available with 4 point crystal mount for Harsh Environment Applicatio Military Temperature
Performance Specifications
TX-502 Temperature Compensated Crystal Oscillator High Precision TX-502 Features High Precision TCXO OCXO Replacement OCXO Temperature Performance Low power consumption Tight Tolerances Frequency range
PX-990 Crystal Oscillator Ultra Low Noise and G-Sensitivity
PX-990 Crystal Oscillator Ultra Low Noise and G-Sensitivity PX-990 Ultra low Phase Noise Ultra low G-Sensitivity Vibration hardened Tight Tolerances Frequency Range Standard Frequency Features 60-120MHz
OX-200 Oven Controlled Crystal Oscillator
OX-200 Oven Controlled Crystal Oscillator OX-200 Features Reflow Process Compatible AT-Cut and SC-Cut Crystal Options Low Profile Compact Package Applications Base Stations Test Equipment Synthesizers
Performance Specifications
OX-208 Oven Controlled Crystal Oscillator OX-208 OX-208 The OX-208 is a high stability ovenized crystal oscillator in a 25 x 25 mm package, capable of aging rates of 0.15 /day and temperature stabilities
TX-705 Temperature Compensated Crystal Oscillator
TX-705 Temperature Compensated Crystal Oscillator TX-705 Features Applications The TX-705 is a TCXO family designed for applications where superior g-sensitivity and good phase noise together with small
VX-503 Voltage Controlled Crystal Oscillator
VX3 Voltage Controlled Crystal Oscillator VX3 Features Description The VX3 voltage controlled crystal oscillator expands VI s advanced VCXO performance capabilities while adhering to a package footprint
OX-171 Oven Controlled Crystal Oscillator
OX-171 Oven Controlled Crystal Oscillator OX-171 The OX-171 is a high stability ovenized crystal oscillator in a 28 x 38 mm package, capable of aging rates of 0.06 /day and temperature stabilities of 1
TX-707 Low g-sensitivity Temperature Compensated Crystal Oscillator
TX-707 Low g-sensitivity Temperature Compensated Crystal Oscillator TX-707 The TX-707 Series TCXO combines innovative manufacturing and the latest technology to provide low phase noise and excellent g-sensitivity.
TX-500 Temperature Compensated Crystal Oscillator
TX-500 Temperature Compensated Crystal Oscillator TX-500 Features Low Phase Noise Low power consumption Output: HCMOS, Clipped Sinewave, PECL, True Sinewave Tight Tolerances Frequency range 1 of 6.4-160
PS-701 SAW Oscillator
PS-701 SAW Oscillator PS-701 The PS-701 SO (Saw Oscillator from Vectron is a high frequency, ultra low phase noise oscillator designed to support high speed data converters and 100G / 400G coherent optical
HT RTCXO High Temperature Low Power Real Time Clock Crystal Oscillators
HT RTCXO High Temperature Low Power Real Time Clock Crystal Oscillators PX-702 PX-570 PX-420 Vectron offers a High Temperature Low Power Real Time Clock Crystal Oscillator (HT RTCXO) product platform's
VX-990 Voltage Controlled Crystal Oscillator Ultra Low Noise and G-Sensitivity
VX-990 Voltage Controlled Crystal Oscillator Ultra Low Noise and G-Sensitivity VX-990 Ultra low Phase Noise Ultra low G-Sensitivity Vibration hardened Tight Tolerances Frequency Range Standard Frequency
MX-600 Microprocessor Controlled Crystal Oscillator High Precision
MX-600 Microprocessor Controlled Crystal Oscillator High Precision MX-600 Features Ultra High Stability MCXO Low Power Consumption Meets Stratum 3 acc. GR-1244 ROHS 6 Compliant Frequency Range 1 : 8-40
TX-801 Temperature Compensated Crystal Oscillator
TX-801 Temperature Compensated Crystal Oscillator TX-801 Features Applications The TX-801 TCXO provides fully compliant Stratum 3 levels of stability in a 5x3.2mm package. It is ideal for timing over IP
OX-175 Ultra Low Noise Oven Controlled Crystal Oscillator
OX-175 Ultra Low Noise Oven Controlled Crystal Oscillator OX-175 The OX-175 is a low phase noise, high-frequency ovenized crystal oscillator in a 28 x 38 mm package. The oscillator has a noise floor of
Performance Specifications. Frequency Stabilities Supply Voltage (Vs) ma ma. RF Output
TX-309 Hi-Rel Temperature Compensated Crystal Oscillator TX-309 Features Radiation Tolerant Small footprint Frequency Range: 0.3 MHZ to 150 MHZ Previous Model: C2501 Applications Reference clock for space
MX-503 Microprocessor Controlled Crystal Oscillator High Precision
MX-503 Microprocessor Controlled Crystal Oscillator High Precision MX-503 Features Ultra High Stability MCXO Low Power Consumption Meets Stratum 3 acc. GR-1244 ROHS 6 Compliant Frequency Range 1 : 8-50
TX-700 Temperature Compensated Crystal Oscillator
TX-700 Temperature Compensated Crystal Oscillator Features EFC Standard Small Size 0% RoHS Compliant Low Profile range of 6.4-52 MHz Standard Frequencies:, 12.8, 16.384, 19.44, 20, 20.48 MHz Applications
PX-570 High Temperature Crystal Oscillator
PX-570 High Temperature Crystal Oscillator PX-570 Vectron offers a High Temperature Crystal Oscillator (PX-570) product platform for extreme environment applications. In addition to its wide operating
PX-702 PX-570 PX-420
High Temperature Low Power Real Time Clock Crystal Oscillators PX-702 PX-570 PX-420 Vectron offers a High Temperature Low Power Real Time Clock Crystal Oscillator (HT RTC XO) product platform for extreme
EX-421 Evacuated Miniature Crystal Oscillator
EX-421 Evacuated Miniature Crystal Oscillator EX-421 Description The EX-421 provides exceptionally low aging rates and tight temperature stabilities in an extremely small package over a wide range of environmental
VS-504 Dual Frequency VCSO High Frequency
VS-504 Dual Frequency VCSO High Frequency VS-504 The VS-504 dual frequency VCSO (Voltage Controlled Saw Oscillator from Vectron is a high frequency, ultra low phase noise oscillator designed to support
OX-221 Oven Controlled Crystal Oscillator
OX-221 Oven Controlled Crystal Oscillator OX-221 Features Surface Mount package SC_CUT Crystal Low Profile Compact Package standard frequency: 1, 2, 3.72 MHz Applications Base stations Test equipment Synthesizers
VS-507 Voltage Controlled SAW Oscillator
VS-507 Voltage Controlled SAW Oscillator VS-507 Description The VS-507 VCSO (Voltage Controlled Saw Oscillator from Vectron is an ultra high frequency, ultra low phase noise oscillator. The VS-507 provides
VX-701 Voltage Controlled Crystal Oscillator
VX-701 Voltage Controlled Crystal Oscillator VX-701 Features AT-Cut Crystal Surface Mount FR4 based package Reflow Process Compatible Low Tight Stabilities Frequency Range 16-200MHz Standard Frequencies
VX-706 Voltage Controlled Crystal Oscillator
VX-706 Voltage Controlled Crystal Oscillator VX-706 Features AT-Cut Crystal Surface Mount FR4 based package Single layer Reflow Process Compatible Low & Jitter Tight Stabilities Frequency Range 40-300MHz
MD-403 I2C InterfaceOven Controlled Crystal Oscillator
MD-43 I2C InterfaceOven Controlled Crystal Oscillator MD-43 The MD-43 is a Vectron module that contains a medium size ovenized crystal oscillator and an I 2 C interface that communicates with an onboard
VX-505 Voltage Controlled Crystal Oscillator Extended Temperature
VX-505 Voltage Controlled Crystal Oscillator Extended Temperature VX-505 Features AT-Cut Crystal Surface Mount FR4 based package Reflow Process Compatible Extended temperature range -55..+125 C Low Tight
VT-800 Temperature Compensated Crystal Oscillator Previous Vectron Model VTC4
VT-800 Temperature Compensated Crystal Oscillator Previous Vectron Model VTC4 VT-800 Description Vectron s VT-800 Temperature Compensated Crystal Oscillator (TCXO) is a quartz stabilized, clipped sine
Performance Specifications
OX-280 Oven Controlled Crystal Oscillator OX-280 Features Surface Mount Package AT-CUT and SC_CUT Crystal Options Low Profile Compact Package Compact Package Applications Base stations Test equipment Synthesizers
VT-860 Temperature Compensated Crystal Oscillator
VT-860 Temperature Compensated Crystal Oscillator VT-860 Description Vectron s VT-860 Temperature Compensated Crystal Oscillator (TCXO) is a quartz stabilized, Clipped sine wave output, analog temperature
VC-801 CMOS Crystal Oscillator Previous Vectron Model VCC4
C-01 CMOS Crystal Oscillator Previous ectron Model CC4 C-01 ectron s C-01 Crystal Oscillator (XO) is a quartz stabilized square wave generator with a CMOS output. The C-01 uses fundamental or 3rd overtone
VX-805 Voltage Controlled Crystal Oscillator
VX-805 Voltage Controlled Crystal Oscillator VX-805 Description The VX-805 is a Voltage Control Crystal Oscillator that operates at the fundamental frequency of the internal crystal. The crystal is a high-q
VT-501 Temperature Compensated Crystal Oscillator Previous Vectron Model VTD3
T-501 Temperature Compensated Crystal Oscillator Previous ectron Model TD3 T-501 Description ectron s T-501 Temperature Compensated Crystal Oscillator (TCXO) is a quartz stabilized, CMOS output, analog
VC-708 VC-708. LVPECL, LVDS Crystal Oscillator Data Sheet Ultra Low Phase Noise. Description
C-708 LPECL, LDS Crystal Oscillator Data Sheet Ultra Low Phase Noise C-708 Description ectron s C-708 Crystal Oscillator is a quartz stabilized, low phase noise, differential output oscillator which is
VC-820 CMOS Crystal Oscillator
C-20 CMOS Crystal Oscillator C-20 ectron s C-20 Crystal Oscillator (XO) is a quartz stabilized square wave generator with a CMOS output. The C-20 uses a fundamental or a 3rd overtone crystal, oscillating
VVC1 VVC2 Voltage Controlled Crystal Oscillator
VVC1 VVC2 Voltage Controlled Crystal Oscillator Features The VVC1 Voltage Controlled Crystal Oscillator VCXO with a CMOS output Small 5.0 X 7.0 X 1.9 mm package Output frequencies to 66 MHz 5.0 or 3.3
VTC2 Series Voltage Controlled Temperature Compensated Crystal Oscillator
VTC2 Series Voltage Controlled Temperature Compensated Crystal Oscillator Features CMOS Square Wave Output Enable Disable Feature Output Frequencies to 30 MHz Fundamental Crystal Design Optional VCXO function
VTC4 series Voltage Controlled Temperature Compensated Crystal Oscillator
VTC4 series Voltage Controlled Temperature Compensated Crystal Oscillator Features Clipped Sine Wave Output Output Frequencies to 27 MHz Fundamental Crystal Design Optional VCXO Function available Gold
VT-701 Temperature Compensated Crystal Oscillator Previous Vectron Model VTC2
T-701 Temperature Compensated Crystal Oscillator Previous ectron Model TC2 T-701 Description ectron s T-701 Temperature Compensated Crystal Oscillator (TCXO) is a quartz stabilized, clipped sine wave output,
VC-827 Differential (LVPECL, LVDS) Crystal Oscillator
C-827 Differential (LPECL, LDS) Crystal Oscillator C-827 Description ectron s C-827 Crystal Oscillator is a quartz stabilized, differential output oscillator, operating off a 2.5 or 3.3 volt power supply
VC-711 Differential (LVPECL, LVDS) Crystal Oscillator
C-7 Differential (LPECL, LDS) Crystal Oscillator C-7 Description ectron s C-7 Crystal Oscillator is a quartz stabilized, differential output oscillator, operating off either a 2.5 or 3.3 volt power supply
VV-701 Voltage Controlled Crystal Oscillator Previous Vectron Model VVC1/VVC2
-701 oltage Controlled Crystal Oscillator Previous ectron Model C1/C2-701 Description ectron s -701 oltage Controlled Crystal Oscillator (CXO) is a quartz stabilized square wave generator with a CMOS output.
VS-800 Ultra-Low Jitter High Frequency VCSO
VS-800 Ultra-Low Jitter High Frequency VCSO VS-800 Description The VS-800 is a Voltage Controlled SAW Oscillator that operates at the fundamental frequency of the internal SAW resonator. The SAW resonator
HT-MM900A Military Temperature Oscillator
HT-MM900A Military Temperature Oscillator Features Performance Specifica ons Applications Frequency Range 1 MHz and 137 MHz accurate to 6 decimal places Military Applica ons Low power consump on of 4.5
VX-705 Voltage Controlled Crystal Oscillator
X-705 oltage Controlled Crystal Oscillator X-705 Description The X-705 is a oltage Control Crystal Oscillator that operates at the fundamental frequency of the internal crystal. The crystal is a high-q
MHz. Performance Specifications
VX-501-0276-245M76 Preliminary version: Subject to technical modification. VCXO VX-501-0276-245M76 Nominal frequency (f0) 245.76 MHz Performance Specifications Frequency stabilities vs. operating temp.
VCC M CMOS Crystal Oscillator
CC1-1545-49M1520000 CMOS Crystal Oscillator CC1 Description ectron s CC1 Crystal Oscillator (XO) is a quartz stabilized square wave generator with a CMOS output. The CC1 uses a fundamental or 3rd overtone
Note. Figure1. The Temperature Stability ranges of various oscillator types
Tutorial on TCXOs Introduction to TCXOs Helping Customers Innovate, Improve & Grow Note Application Note TCXOs are necessary when a level of temperature stability is required that cannot be reached by
Description. Block Diagram. Complementary Output. Output. Crystal. Oscillator. E/D or NC
CC6 LPECL, LDS Crystal Oscillator Data Sheet CC6 Description ectron s CC6 Crystal Oscillator is a quartz stabilized, differential output oscillator, operating off either a 2.5 or 3.3 volt supply, hermetically
OX-204 at 10 MHz Ultra Low Phase Noise Oven Controlled Crystal Oscillator
OX-204 at 10 MHz Ultra Low Phase Noise Oven Controlled Crystal Oscillator OX-204 OX-204 The OX-204 is an Ultra Low Phase Noise Ovenized Crystal Oscillator with a noise floor as low as -175 dbc/hz. Designed
VS-708 Single Frequency VCSO
VS-708 Single Frequency VCSO VS-708 Description The VS-708 is a Voltage Controlled SAW Oscillator that operates at the fundamental or a fraction of the internal SAW filter frequency. The SAW component
High Temperature Electronics
High Temperature Electronics High Temperature Electronics Crystal Oscillators Packaged Quartz Crystals Real Time Clocks Electronic Module Products www.vectron.com Our Heritage With over 50 years experience
VCC6-L/V 2.5 or 3.3 volt LVDS Oscillator
VCC6-L/V 2.5 or 3.3 volt LVDS Oscillator Features 2.5 or 3.3 V LVDS 3rd Overtone Crystal for best jitter performance Output frequencies to 270 MHz Low Jitter < 1 ps rms, 12kHz to 20MHz Enable/Disable output
MV-9300A 1-80 MHz High Performance VCXO
MV-9300A 1-80 MHz High Performance VCXO Features Any frequency between 1 MHz and 80 MHz with 6 decimal places of accuracy CMOS compable output Industrial and extended commercial temperature ranges Industry-standard
VX-703 Data Sheet VX-703. Voltage Controlled Crystal Oscillator Previous Vectron Model V-Type. Description. Features. Applications.
X-703 Data Sheet oltage Controlled Crystal Oscillator Previous ectron Model -Type X-703 Description ectron s X-703 oltage Controlled Crystal Oscillator (CXO) is a quartz stabilized square wave generator
VS-751 VS-751. Dual Frequency VCSO. Description. Features. Applications. Block Diagram. Vcc COutput Output SAW 1 SAW 2. Vc FS Gnd
VS-751 Dual Frequency VCSO VS-751 The VS-751 is a SAW based voltage controlled oscillator that operates at the fundamental frequencies of the internal SAW filters. These SAW filters are high-q quartz devices
VSS4 series 3.3 Volt Spread Spectrum CMOS Oscillator
VSS4 series 3.3 Volt Spread Spectrum CMOS Oscillator Features CMOS output Output frequencies to 168 MHz Tri-state output for board test and debug -10/70 or 40/85 C operating temperature Gold over nickel
VCC4 series 1.8, 2.5, 3.3, 5.0 volt CMOS Oscillator
CC series 1., 2.5,., 5.0 volt CMOS Oscillator Features CMOS output Output frequencies to 125 MHz Low jitter, Fundamental or rd OT Crystal Tristate output for board test and debug 10/70 or 0/5 C operating
Typical Applications Satellite and Deep Space Radiation Tolerance Required Severe Environmental Conditions. 10 MHz 40 MHz 10, 20 MHz
EX-209 Hi-Reliability Evacuated Miniature Crystal Oscillator EX-209 Features 16 pin Double Dip Package Ruggedized hybrid thick film construction Low Power Consumption Legacy Model: EX-245 Typical Applications
Description. Block Diagram LD (10) VMON (5) Phase Detector & LD (9) FIN 4 CFOUT 1 GND (3, 7, 11, 12) Figure 1. Functional block diagram
FX-424 Low Jitter Frequency Translator FX-424 The FX-424 is a precision quartz-based frequency translator used to translate an input frequency such as 8 khz, 1.544 MHz, 2.048 MHz, 19.44 MHz etc. to any
MD-261 MD-261. Features. Applications. Block Diagram. GNSS (GPS and GLONASS) Disciplined Oscillator Module
MD-261 GNSS (GPS and GLONASS) Disciplined Oscillator Module MD-261 The MD-261 is a fully integrated GNSS disciplined oscillator module in a compact surface mount 25 x 20 mm package. The module has an embedded
VS-500A Voltage Controlled Saw Oscillator
Product Data Sheet VS-500A Voltage Controlled Saw Oscillator Features Output Frequencies from 155 MHz to 800 MHz Low Jitter < 1 ps rms in the 12kHz to 20MHz range < 1ps rms jitter in 50kHz to 80MHz range
OX-304 at 10 MHz Ultra Low Phase Noise Oven Controlled Crystal Oscillator
OX-304 at 10 MHz Ultra Low Phase Noise Oven Controlled Crystal Oscillator OX-304 The OX-304 is an Ultra Low Phase Noise Ovenized Crystal Oscillator with a noise floor as low as -173 dbc/hz in a compact
Description. Block Diagram. Complementary Output. Output. Crystal. Oscillator E/D
X-700 oltage Controlled Crystal Oscillator Previous ectron Model C-710 X-700 The X-700 is a oltage Controlled Crystal Oscillator that operates at the fundamental frequency of the internal HFF crystal.
Performance Specifications. Frequency Stabilities 1 ( MHz) -20 to +70 C -40 to +85 C -40 to +95 C Residual error compare to fit curve
MD-403 I2C InterfaceOven Controlled Crystal Oscillator MD-403 The MD-403 is a Vectron module that contains a medium size ovenized crystal oscillator and an I 2 C interface that communicates with an onboard
QTCT350 SERIES 3.2 x 5mm MINIATURE SMD TEMPERATURE CONTROLLED CRYSTAL OSCILLATORS 2.8 to 5.0Vdc MHz to 52.
Description Q-Tech s surface-mount QTCT350 oscillators consist of an IC 3.3Vdc, 5.0Vdc TCXO built in a low profile ceramic package with gold plated contact pads. Features ECCN: EAR99 Frequency range from
Performance Specifications. Frequency Stabilities 1 ( 10 & 20 MHz)
MD-223 I 2 C Interface Oven Controlled Crystal Oscillator Preleminary version MD-223 The MD-223 is a Vectron module that contains a medium size ovenized crystal oscillator and an I 2 C interface that communicates
Description. Block Diagrams. Figure 1b. Crystal-Based Multiplier w/saw
C-501 oltage Controlled Crystal Oscillator C-501 Description The C-501 is a voltage controlled crystal oscillator that is housed in a hermetic 14.0 x 9.0 x 4.5mm ceramic package. Depending upon the frequency
FX-700 Low Jitter Frequency Translator
Product Data Sheet FX-700 Low Jitter Frequency Translator Description The FX-700 is a crystal-based frequency translator used in communications applications where low jitter is paramount. Performance advantages
J-Type Voltage Controlled Crystal Oscillator
J-Type Voltage Controlled Crystal Oscillator Product is compliant to RoHS directive and fully compatible with lead free assembly Features Output Frequencies from 1.024 MHz to 170.000 MHz +3.3 or +5.0 volt
T5321 Series T5421 Series 5x7 mm Surface Mount High Reliability Tristate/Non-Tristate, 1MHz to 100MHz
Features Leadless chip carrier package is hermetically sealed for superior aging and field performance Crystal angle controlled to ±1 minute for excellent temperature stability 168 hour Class B burn-in
Block Diagram. Figure 1. Functional Block Diagram
MD-171 High Stability GNSS (GPS and GLONASS) Disciplined Oscillator Module MD-171 The MD-171 is a Vectron GNSS disciplined module. It is a fully integrated GNSS disciplined oscillator module in a compact
V-Type Voltage Controlled Crystal Oscillator (VCXO)
Product Data Sheet V-Type Voltage Controlled Crystal Oscillator (VCXO) Features Output Frequencies to 77.760 MHz 5.0 or 3.3 volt operation Tri-State Output Jitter Performance 12MHz) VCXO
QTCT570 SERIES 5 x 7mm MINIATURE SMD TEMPERATURE CONTROLLED CRYSTAL OSCILLATORS 2.8 to 3.3Vdc MHz to MHz Description
Description Q-Tech s surface-mount QTCT570 oscillators consist of an IC 2.8Vdc, 3.3Vdc clock TCXO built in a low profile ceramic package with gold plated contact pads. Features ECCN: EAR99 Frequency range
SONET / SDH. Block Diagram. COutput Output XTAL HPLL. OE or NC. Figure 1 - Block Diagram
PX7 Single Frequency HPLL XO PX7 Features Features Description Applications The PX7 is a crystal oscillator, XO, based upon ectron s HPLL high performance phase locked loop frequency multiplier ASIC, that
T5621 Series T5721 Series 5x7 mm Surface Mount High Reliability Tristate/Non-Tristate, 16kHz to 100MHz
Features Leadless chip carrier package is hermetically sealed for superior aging and field performance Crystal angle controlled to ±1 minute for excellent temperature stability 168 hour Class B burn-in
VCC6-Q/R Series 2.5 and 3.3 volt LVPECL Crystal Oscillator
CC6-Q/R Series 2.5 and 3.3 volt LPECL Crystal Oscillator Features 2.5 or 3.3 LPECL 3 rd Overtone Crystal for best jitter performance Output frequencies to 270 MHz 0.2pS rms jitter, 12kHz-20MHz,155.52MHz
MX-503 High Precision Microprocessor Controlled Crystal Oscillator
MX-503 High Precision Microprocessor Controlled Crystal Oscillator MX-503 Features Ultra High Stability MCXO Low Power Consumption Meets Stratum 3 acc. GR-1244 ROHS 6 Compliant Frequency Range 1 : 8-50
VFH2321-VFH2324 VFH2421-VFH2424 XO Hi-REL, 1.8V 5x7mm SMD, HCMOS
Features Leadless chip carrier package is hermetically sealed for superior aging and field performance Crystal angle controlled to ±0.5 minute for excellent temperature stability 168 hour Class B burn-in
VS-701 High Shock Discrete Voltage Controlled SAW Oscillator
VS-701 High Shock Discrete Voltage Controlled SAW Oscillator VS-701 The VS-701 VCSO (Voltage Controlled Saw Oscillator from Vectron is a high frequency, ultra low phase noise oscillator designed to support
VVC4 Voltage Controlled Crystal Oscillator
C4 oltage Controlled Crystal Oscillator Features ectron s Smallest CXO, 5.0 X 3.2 X 1.2 mm High Frequencies to 77.70 MHz 5.0 or 3.3 operation Linearity 10% Tri-State Output for testing Low jitter < 1ps
OX-400 / OX 401 Oven Controlled Crystal Oscillator
OX-400 / OX 401 Oven Controlled Crystal Oscillator OX-400 / 401 Features 4-Pin Dip Fast warm-up TCXO replacement for better short term stability Frequency Range, 10 MHz to 40 MHz Standard frequencies,
MX-041 Oven Controlled Crystal Oscillator
MX-041 Oven Controlled Crystal Oscillator MX-041 Features Applications SC-Cut resonator Frequency Range: 5 MHZ to 20 MHZ Low Package Height Temperature stability to 0.4 Aging rate 0.1 /day Frequency range
MD-173 High Stability Coefficient Oscillator I C interface Oven Controlled Crystal Oscillator
MD-173 High Stability Coefficient Oscillator I C interface Oven Controlled Crystal Oscillator 2 MD-173 The MD-173 is a Microsemi Coefficient Oscillator (CCXO) that contains a high-stability ovenized crystal
VCA1 series 3.3, 5.0 volt CMOS Oscillator
CA1 series 3.3, 5.0 volt CMOS Oscillator Features CMOS output Output frequencies to 160 MHz Tristate output for board test and debug 0/70 or 40/85 C operating temperature Product is compliant to RoHS directive
QTCT220 SERIES 2.0 x 2.5mm MINIATURE SMD TEMPERATURE CONTROLLED CRYSTAL OSCILLATORS 2.8 to 3.3Vdc MHz to 52.
5PeNdTbfTaY Q-Tech s surface-mount QTCT220 oscillators consist of an IC 3.3Vdc TCXO built in a low profile ceramic package with gold plated contact pads. Features ECCN: EAR99 Frequency range from 10.000MHz
OX-046 VHF low g-sensitivity Oven Controlled Crystal Oscillator
OX-046 VHF low g-sensitivity Oven Controlled Crystal Oscillator OX-046 Features Ultra Low G-Sensitivity Low Phase Noise Very High Frequency Frequency Range: 50 MHZ to 250 MHZ Standard Frequency: 100 MHz
S1903 and S1950 Series
Actual Size = 5 x 7mm Product Features 3.3V or 5V ACMOS/TTL compatible logic levels Very tight frequency stability available Fast clock edge rate Pin-compatible with standard 5x7mm packages Designed for
Logic & Supply Voltage: L = LVHCMOS +3.3V at 15pF N=LVHCMOS +2.5V at 15pF R = LVHCMOS +1.8V at 15pF
Description Q-Tech s surface-mount QTCC230 oscillators consist of an IC 3.3Vdc, 2.5Vdc, and 1.8Vdc clock square wave generator and a miniature strip AT quartz crystal built in a low profile ceramic package
VCO-600A Voltage Controlled Saw Oscillator
Product Data Sheet Not Recommended For New Designs Voltage Controlled Saw Oscillator Features The VCO600A Voltage Controlled SAW Oscillator Output Frequency @ 155 MHz to 1 GHz Low jitter, 3pS rms for 622.080
Series T7250-T7258, T9250-T9258, T7001-T7013, T9301-T9313 Extended Temperature/COTS XO, 3.3V
Features 20kHz to 100MHz frequency range 5X7 SMD form factor Hermetically sealed for rugged environmental conditions Extremely wide operating temperature range accommodates harsh environments Crystals
CXOQ CXOQ 1.8V CXOQ 2.5V CXOQ 3.0V CXOQ 3.3V
CXOQ Statek s ultra miniature and ultra low profile CXOQ oscillators consist of a CMOS/TTL compatible hybrid circuit and a state-ofthe-art, miniature, fundamental-mode crystal. Model Name Description CXOQ
VCC4 series 1.8, 2.5, 3.3, 5.0 volt CMOS Oscillator
CC series 1.,.5,., 5.0 volt CMOS Oscillator Features CMOS output Output frequencies to 15 MHz Low jitter, Fundamental or rd OT Crystal Tristate output for board test and debug 10/70 or 0/5 C operating
Block Diagram. COutput Output XTAL HPLL. Vc OE Gnd. Figure 1 - Block Diagram
X7 Single Frequency HPLL CXO X7 Features Features Description Applications The X7 is a voltage controlled crystal oscillator, CXO, based upon ectron s HPLL high performance phase locked loop frequency
Other Options Available For An Additional Charge Hot Solder Dip Sn60/Pb40 per MIL-PRF Specifications subject to change without prior notice.
6QeOdUbfUaZ Q-Tech s surface-mount QTCC570 oscillators consist of an IC 5Vdc, 3.3Vdc, 2.5Vdc, and.8vdc clock square wave generator and a miniature strip AT quartz crystal built in a low profile ceramic
Specification AXIOM210 Rev.: 3 Date: Oscillator type: Ultra-Low Phase Noise OCXO in Vibration-isolated Package
in Specification AXIOM210 Rev.: 3 Date: 2015-02-17 Oscillator type: Ultra-Low Phase Noise OCXO in Vibration-isolated Package Parameter min. typ. max. Unit Condition Frequency range 50 130 MHz Standard