Oven Controlled Crystal Oscillator OCXO SERIES 8100
|
|
|
- Samuel Johnson
- 5 years ago
- Views:
Transcription
1 FEATURES IEEE 1588 compatible Frequencies up to 100 MHz ELECTRICAL SPECIFICATIONS Frequency Range* fo MHz Supply Voltage Vs Vs ±5% Power Consumption Warm-up Time Frequency Calibration Frequency Stability vs. Temperature* PS Steady 25 C 1.25 PS,w During warm-up,@ 25 C 3.0 tw Δf/f0 Δf/f0 (Ta) Vs, Ta=+25 C, within ±100ppb of final frequency with reference after 1 hour on Ta=+25 C, after 15mins power on ref. to nominal frequency Measurement referenced to (fmax+fmin)/2. See Table V W 5 min ppb ppb Frequency Stability vs. Δf/f0 Ta=25 C, Vs±5%, load=15pf ppb Supply Voltage (ΔVCC) Frequency Stability vs. Load Δf/f0 (Δl) Ta=25 C, Vs, load=15pf±5% ppb Variation Aging, after 30 days of operation Operating Temperature Range* Δf/Δtd Per day ppb Δf/Δty First year ppb Δf/Δty 10 years ppm See Table C Storage Temperature T(stg) C Short Term Stability τ=1s 0.05 ppb Control Voltage Range VC V Frequency Tuning Range VC = 0V -4-2 ppm VC = 1.65V ppb VC= 3.3V ppm Linearity % *Not any Combination Frequency-Operating Temperature Range- Stability is available. Please consult factory **The above Specification is an example for MHz, 5V
2 PHASE Hz Offset ( f) -90 Hz Offset ( f) -120 Hz Offset ( f) -140 khz Offset ( f) -145 khz Offset ( f) -150 khz Offset ( f) -155 dbc/hz CMOS OUTPUT CHARACTERISTICS Output Levels VOH/VO L VCC = 5.0V, load = 15pF 4.5/0.5 V Duty Cycle DC load = 15pF 45/55 % Rise/Fall Time tr/tf 10% ~ 90% Vout 5 ns Load 15 pf SINE-WAVE OUTPUT CHARACTERISTICS Output Levels dbm Harmonics -40 dbc Spurious -70 dbc Load 50 Ω Table 1 TEMPERATURE FREQUENCY STABILITY (ppb) RANGE C ~ +60 Y Y Y Y Y Y Y -10 ~ +60 Y Y Y Y Y Y Y -20 ~ +70 Y Y Y Y Y Y Y -30 ~ +70 Y Y Y Y Y Y Y -40 ~ +75 Y Y Y Y Y Y Y -40 ~ +85 Y Y Y Y Y Y Y -55 ~ Y Y Y Y Y
3 NICAL CONDITIONS MTIE TDEV
4 ENVIRONMENTAL MECHANICAL CONDITIONS Storage temperature range Drop Test Bumping Test Vibration Test Mechanical Shock Thermal shock -55 C to +105 C The test shall be carried out as the provisions of the IEC test Ed. 10cm height, 3 times on hard board with thickness of 3cm Device are bumped to three mutually perpendicular axes at peak acceleration of 400m/s 2, each 4000±10times, 6ms pulse duration time Frequency range: 1Hz-4Hz-100Hz-200Hz Acceleration: g 2 /Hz-0.01g 2 /Hz-0.01g 2 /Hz-0.001g 2 /Hz Grms=1.15g Sweep time: 30 minutes (perpendicular axes each sweep time) 100g, 6mS duration, 1/2 sine wave, 3 shocks each direction along 3 mutually perpendicular planes. 0.5h@ 40,0.5h@+85,Note: the changing time < 30 seconds, cycling for 100 times MECHANICAL DIMENSIONS AND PIN FUNCTIONING PIN SYMBOL FUNCTION 1 N/C or VC No connect or Control Voltage 2 N/C or Vref No connect or Reference Voltage 3 Vs Supply Voltage 4 OUTPUT RF Output 5 GND Case/Ground
5 PART NUMBERING SYSTEM Prefix Output Type Cut Type Series Revision Temperature Range Stability Frequency Supply Voltage OX 4: LVCMOS 6: SINE 1: No Control Voltage 5: Control Voltage 80:8000 A First letter: Lowest Temperature, Second letter: Highest Temperature: From A=-55 C to Z=+70 C, Then: 1=+75 C, 2=+80 C, 3=+85 C in 5 C Steps Example: HZ: -20 C to +70 C LZ: 0 C to +70 C D3: -40 C to +85 C Value x 10E-2 in ppm Example: 0.5= 5 ppb 1= 0.01 ppm In MHz 3: 3.3 V 5: 5.0 V 12: 12.0 V OX A-D Supply Voltage: 5 V Frequency: 20 MHz Temp Stability: 1 x 10E -2 = ±0.01 ppm Operating Temp Range: -40 C to 85 C Revision: A SERIES: 8000 Electrical Control Voltage Output: LVCMOS Prefix: OCXO March, 2017
Oven Controlled Crystal Oscillator OCXO SERIES IEEE 1100
ELECTRICAL SPECIFICATIONS Min. Typ. Max. Frequency Range* fo 10.000 50.000 MHz Supply Voltage Vs Vs ±5% Power Consumption Warm-up Time Frequency Calibration Frequency Stability vs. Temperature* 3.135 3.3
Model 149 Stratum 3E, 9x14 mm OCXO
Features 10 to 50 MHz Frequency Range Compliant to Stratum 3E of GR1244CORE Surface Mount 3.3V or 5.0V operation Low Jitter/Phase Noise Tape and Reel Packaging Applications Telecom Switching Wireless Communication
MX-041 Oven Controlled Crystal Oscillator
MX-041 Oven Controlled Crystal Oscillator MX-041 Features Applications SC-Cut resonator Frequency Range: 5 MHZ to 20 MHZ Low Package Height Temperature stability to 0.4 Aging rate 0.1 /day Frequency range
Specification AXIOM210 Rev.: 3 Date: Oscillator type: Ultra-Low Phase Noise OCXO in Vibration-isolated Package
in Specification AXIOM210 Rev.: 3 Date: 2015-02-17 Oscillator type: Ultra-Low Phase Noise OCXO in Vibration-isolated Package Parameter min. typ. max. Unit Condition Frequency range 50 130 MHz Standard
Typical Applications Satellite and Deep Space Radiation Tolerance Required Severe Environmental Conditions. 10 MHz 40 MHz 10, 20 MHz
EX-209 Hi-Reliability Evacuated Miniature Crystal Oscillator EX-209 Features 16 pin Double Dip Package Ruggedized hybrid thick film construction Low Power Consumption Legacy Model: EX-245 Typical Applications
OX-175 Ultra Low Noise Oven Controlled Crystal Oscillator
OX-175 Ultra Low Noise Oven Controlled Crystal Oscillator OX-175 The OX-175 is a low phase noise, high-frequency ovenized crystal oscillator in a 28 x 38 mm package. The oscillator has a noise floor of
O-CDFEXYZXX-X-X-10MHz/100MHz Precision Ultra Low Phase Noise Dual Frequency OCXO Reference Module (DFRM)
O-CDFEXYZXX-X-X-10MHz/100MHz Precision Ultra Low Phase Noise Dual Frequency OCXO Reference Module (DFRM) Rev C The DFRM consists of 2 Ultra Low Phase Noise OCXO at 10 MHz and 100 MHz. The module is packaged
OX-304 at 10 MHz Ultra Low Phase Noise Oven Controlled Crystal Oscillator
OX-304 at 10 MHz Ultra Low Phase Noise Oven Controlled Crystal Oscillator OX-304 The OX-304 is an Ultra Low Phase Noise Ovenized Crystal Oscillator with a noise floor as low as -173 dbc/hz in a compact
OX-175 Ultra Low Noise Oven Controlled Crystal Oscillator
OX-175 Ultra Low Noise Oven Controlled Crystal Oscillator OX-175 The OX-175 is a low phase noise, high-frequency ovenized crystal oscillator in a 28 x 38 mm package. The oscillator has a noise floor of
OD100LP-Series Low Phase Noise
OD100LP-Series Low Phase Noise VCOCXO1 Description: The Connor-Winfield OD100LP-series is a low phase noise VCOCXO in a 1x1 inch metal package. The OD100LP-series is designed for those applications that
Low Noise Oscillator series LNO 100 OCXO LNO 100
Specific request can be addressed to RAKON info@rakon.fr Product Description This Low Noise Oven Controlled Crystal Oscillator available in different formats from 51x51x25 mm (2 x2 x1 ) till 25x25x12 mm
O-CXM-XXYZXX-X-X-XX-X Precision Ultra Low Phase Noise OCXO in 36x27 mm Europack with optional Adapter to 2 x2
Product Data Sheet Rev K O-CXM-XXYZXX-X-X-XX-X Precision Ultra Low Phase Noise OCXO in 36x27 mm Europack with optional Adapter to 2 x2 Description O-CX Series is based on Ultra Low Noise 10 MHz reference
OX-171 Oven Controlled Crystal Oscillator
OX-171 Oven Controlled Crystal Oscillator OX-171 The OX-171 is a high stability ovenized crystal oscillator in a 28 x 38 mm package, capable of aging rates of 0.06 /day and temperature stabilities of 1
Performance Specifications
OX-208 Oven Controlled Crystal Oscillator OX-208 OX-208 The OX-208 is a high stability ovenized crystal oscillator in a 25 x 25 mm package, capable of aging rates of 0.15 /day and temperature stabilities
OX-204 at 10 MHz Ultra Low Phase Noise Oven Controlled Crystal Oscillator
OX-204 at 10 MHz Ultra Low Phase Noise Oven Controlled Crystal Oscillator OX-204 OX-204 The OX-204 is an Ultra Low Phase Noise Ovenized Crystal Oscillator with a noise floor as low as -175 dbc/hz. Designed
Low Noise Oscillator series LNO 4800 B MHz
Specific request can be addressed to RAKON hirel@rakon.com Product Description LNO 4800 B3 is a low noise oscillator generating an output signal at 4800 MHz. It is composed by an OCSO (Oven Controlled
O C X O Oven Controlled Crystal Oscillators
What is an OCXO? Relatively speaking, an OCXO performs in the ±0.01~±0.1 ppm range, a TCXO performs in the ±1~±3 ppm range while a non-compensated clock oscillator performs in the ±25, ±50 ppm range. A
2.0 FREQUENCY CHARACTERISTICS Line Parameter Test Condition Value Unit 2.1 Nominal frequency range
CFPT9000 -- SMD Temperature Compensated Crystal Oscillator (PLUTO) -- -- A series of surface mountable 7.0x5.0mm Temperature Compensated Voltage Controlled Crystal Oscillators (TCVCXOs) for medium to high
CMOS/LVCMOS HF VCXO AE-X32BXX-X Series
CMOS/LVCMOS HF VCXO Description The AE-X32BXX Series of voltage controlled crystal oscillators (VCXO) provides high frequency with CMOS/LVCMOS output. The device does not use any frequency multiplication,
RFPT Specifications. SMD Low Acceleration Sensitivity TCXO / TCVCXO. Product description. Applications
RFPT705 -- SMD Low Acceleration Sensitivity TCXO / TCVCXO. -- -- A series of surface mountable Temperature Compensated Voltage Controlled Crystal Oscillators (TCVCXO) for applications where phase noise
O-CS22-HH-0XYZXX-X-X-X-X Series Precision Ultra Low Phase Noise OCXO in Low Profile 22x25x10 mm SMD package
O-CS22-HH-0XYZXX-X-X-X-X Series Precision Ultra Low Phase Noise OCXO in Low Profile 22x25x10 mm SMD package Product Data Sheet Rev E Features SC-cut crystal High Stability Low Profile (10 mm) SMD package
Stability as AXIOM9000 plus low noise high isolation frequency distribution amplifier with 4 to 16 outputs
in Specification AXIOM9000 Rev.: 1 Date: 2016-07-01 Oscillator type: Very High Stability Ultra-Low Noise Reference (D)OCXO in 19 rack (1 HU) with up to 3 outputs Features: Very High Frequency Stability
Low Noise Oscillator series LNO 100 OCXO LNO 100
Specific request can be addressed to RAKON info@rakon.fr Product Description This Low Noise Oven Controlled Crystal Oscillator available in different footprints from 38x38x22 mm (1.5 x1.5 x0.8 ) till 25x22x12
Rakon Product Proposal
RS1490P XO `Tiger' SMD Clock Oscillator Series High Performance PLL Crystal Clock Oscillator. Product description This PLL XO offers ultra low RMS phase jitter and high frequency stability in an industry
Flight Model (FM) Lot Acceptance Test Model (LAT) Quartz Crystal. Synthetic HiQ Quartz, SC-cut, HC-35/U 4-point
in Specification AXIOM75SH Rev.: 1 Date: 2018-02-16 Oscillator type: Low Phase Noise OCXO for Space Application (COTS version) Features: Lower cost Commercial Off-The-Shelf version (COTS) Qualified according
MD-173 High Stability Coefficient Oscillator I C interface Oven Controlled Crystal Oscillator
MD-173 High Stability Coefficient Oscillator I C interface Oven Controlled Crystal Oscillator 2 MD-173 The MD-173 is a Microsemi Coefficient Oscillator (CCXO) that contains a high-stability ovenized crystal
PRELIMINARY. Logic: C = CMOS S = Sine Wave
Description Q-Tech s microcomputer compensated crystal oscillator, MCXO, uses a high stability overtone SC-cut crystal with microprocessor controlled compensation. The self-temperature sensing resonator,
TE 300 TCXO Series 300
For this product, a full detailed specification can also be delivered on request. Specific request can be addressed to RAKON info@rakon.fr Product Description This High performance ITAR-Free Flat Pack
C
Typical Applications Base Stations Test Equipment Synthesizers Digital Switching Features Surface Mount Package Optional Reflow Process Compatible Optional AT-Cut and SC-Cut Crystal Options Low Profile
Excellent Integrated System Limited
Excellent Integrated System Limited Stocking Distributor Click to view price, real time Inventory, Delivery & Lifecycle Information: Abracon Corporation AST3TQ-T-10.000MHZ-50-C For any questions, you can
Model 865 RF / Ultra Low Noise Microwave Signal Generator
Model 865 RF / Ultra Low Noise Microwave Signal Generator Features Excellent signal purity: ultra-low phase noise and low spurious Combination of highest output power and fastest switching Powerful touch-display
PARAMETER SYMBOL CONDITIONS VALUE UNIT
Page 1 of 6 FEATURES APPLICATIONS ±0.28 ppm Holdover Stability Mobile Phones ±4.6 ppm accuracy over all conditions Base Stations including 20 years aging Mobile Radios Miniature 5x7 mm SMD GPS Devices
OX-200 Oven Controlled Crystal Oscillator
OX-200 Oven Controlled Crystal Oscillator OX-200 Features Reflow Process Compatible AT-Cut and SC-Cut Crystal Options Low Profile Compact Package Applications Base Stations Test Equipment Synthesizers
2.0 Absolute Maximum Ratings 1 Parameter Min. Max. Unit.
RFPO45 G.8263 1.0 Specification References a. Rakon part number (Doc ID) M6635LF (514241) b. 25.0MHz MERC 9x7 HOT CMOS 3.3V c. Version 1 (2014-04-01) d. Package 9.7 x 7.5 x 4.3 mm max. 2.0 Absolute Maximum
OX-043 Low g-sensitivity Oven Controlled Crystal Oscillator
OX-043 Low g-sensitivity Oven Controlled Crystal Oscillator OX-043 Features Applications Ultra Low g-sensitivity Low Phase Noise High Stability Frequency Range: 8 MHZ to 15 MHZ Standard Frequency 10 MHz
OX-046 VHF low g-sensitivity Oven Controlled Crystal Oscillator
OX-046 VHF low g-sensitivity Oven Controlled Crystal Oscillator OX-046 Features Ultra Low G-Sensitivity Low Phase Noise Very High Frequency Frequency Range: 50 MHZ to 250 MHZ Standard Frequency: 100 MHz
STRATUM 3E High Stability Oven Stabilized Oscillator OH300 Series OCXO / VCOCXO
Available at Digi-Key** www.digikey.com STRATUM 3E High Stability Oven Stabilized Oscillator OH300 Series OCXO / VCOCXO US Headquarters: 630-851-4722 European Headquarters: +353-61-472221 Description Connor-Winfield
Parameter Conditions & Remarks Min Typical Max Unit. Warm up Steady 25 C Load Output to Ground pf
Model 1380100XXX Features Industry standard 20 x 12.7 mm SMT package Stratum 3E per GR1244CORE 3.3V operation Low Phase Noise Tape and Reel packaging Applications Telecom Switching Wireless Communication
RK 409. Parameters Conditions/remarks Min Nom Max Unit
For this product, full and detailed specifications can be delivered on request. Specific request can be addressed to RAKON hirel@rakon.com Product Description This stable oscillator is designed for Space
Parameter Conditions & Remarks Min Typical Max Unit C 3.3V V Warm up 2.5 Steady 25 C 1.
Model 1190100XXX Features Industry standard 25.4 x 22 mm SMT package Stratum 3E per GR1244Core and CR253Core 3.3V or 5.0V operation Low Phase Noise Tape and Reel packaging Applications Telecom Switching
Synchronized Crystal Oscillator, General Requirements. AH-ASCMXXXG-X Series PATENT PENDING
PATENT PENDING Description The Synchronized Crystal Oscillator is intended for use in the system, which requires multiple clocks in different nodes of the system to run synchronously in frequency without
OX-249 Space Qualified Oven Controlled Crystal Oscillator (OCXO)
Common Characteristics [all frequencies and options] Supply voltage 4.75 5.0 5.25 VDC Power consumption (in air) Frequency vs. Temperature (ref. frequency at 60 minutes) Warm-up Accuracy @+25 C, (ref.
Rubidium Frequency Standard Model AR133A Ruggedized Low Profile
Ruggedized Low Profile Key Features Long-term-stability: 5E-11/month 2E-12 frequency accuracy & 100nSec 1PPS accuracy relative to 1PPS input when disciplined Short term stability: 5E-12 @ 100s Phase noise:
Rubidium Frequency Standard Model AR133A Ruggedized Low Profile
Rubidium Frequency Ruggedized Low Profile Key Features Long-term-stability: 5E-11/month Short term stability: 2E-12 @ 1000s (Typ.) Phase noise: -158 dbc/hz @10kHz Spurious: < -110 dbc Time Accuracy (1PPS):
TX-801 Temperature Compensated Crystal Oscillator
TX-801 Temperature Compensated Crystal Oscillator TX-801 Features Applications The TX-801 TCXO provides fully compliant Stratum 3 levels of stability in a 5x3.2mm package. It is ideal for timing over IP
Model 865-M Wideband Synthesizer
Model 865-M Wideband Synthesizer Features Wideband Low phase noise Fast switching down to 20 µs FM, Chirps, Pulse Internal OCXO, external variable reference Single DC supply Applications ATE LO for frequency
C MHz 52 MHz
Typical Applications PCS Base Stations Land Mobile Radio Cellular Telephony Radio in the Local Loop Frequency range Standard frequencies Features EFC Standard Low Profile Small Size 100 % RoHS compliant
Rakon Product Proposal
RTX5032A -- SMD Temperature Compensated Crystal Oscillator -- -- High performance TCXO offering excellent Phase Noise, Frequency Stability and VCO tilt compensation. -- Product description -- The RTX5032A
Model 855 RF / Microwave Signal Generator
Features Very low phase noise Fast switching Phase coherent switching option 2 to 8 phase coherent outputs USB, LAN, GPIB interfaces Applications Radar simulation Quantum computing High volume automated
Product Specifications Approval Sheet
TAI-SAW TECHNOLOGY CO., LTD. No. 3, Industrial 2nd Rd., Ping-Chen Industrial District, Taoyuan, 324, Taiwan, R.O.C. TEL: 886-3-4690038 FAX: 886-3-4697532 E-mail: tstsales@mail.taisaw.com Web: www.taisaw.com
Package Type: 0 Through Hole Supply Voltage: V V V Logic: HCMOS Sine Wave
Description Q-Tech s High Stability OCXO is a high reliability signal generator that provides an HCMOS or Sine Wave output. The OCXO is available in a Through hole package. A flexible design allows Q-Tech
OX-221 Oven Controlled Crystal Oscillator
OX-221 Oven Controlled Crystal Oscillator OX-221 Features Surface Mount package SC_CUT Crystal Low Profile Compact Package standard frequency: 1, 2, 3.72 MHz Applications Base stations Test equipment Synthesizers
Performance Specifications. Frequency Stabilities Supply Voltage (Vs) ma ma. RF Output
TX-309 Hi-Rel Temperature Compensated Crystal Oscillator TX-309 Features Radiation Tolerant Small footprint Frequency Range: 0.3 MHZ to 150 MHZ Previous Model: C2501 Applications Reference clock for space
Model 865-M Wideband Synthesizer
Model 865-M Wideband Synthesizer Features Wideband Low phase noise Fast switching down to 15 µs FM, Chirps, Pulse Internal OCXO, external variable reference Single DC supply Applications ATE LO for frequency
TEMPERATURE COMPENSATED/ VOLTAGE CONTROLLED CRYSTAL OSCILLATOR
TEMPERATURE COMPENSATED/ VOLTAGE CONTROLLED CRYSTAL OSCILLATOR ASTX-12, ASVTX-12 FEATURES: 2.5 X 2.0 X 0.9mm APPLICATIONS: Ultra miniature and low height 0.9mm. Low current consumption 2mA. Vc function
Ultra-Low Phase Noise OCXO
APPLICATIONS: COTS Military & Industrial Radios & Timing Circuits Cellular Infrastructure Radar Systems Test & Measurement Equipment GPS Tracking with precision hold-over accuracy WiMax / WLAN Precision
2.0 Absolute Maximum Ratings 1 Parameter Min. Max. Unit. a. Storage temperature C b. Supply voltage (VDD) V
E7157LF 1.0 Specification References a. Rakon part number E7157LF b. 100.0MHz RHT1490A TCVCXO c. Version D (2016-12-12) PROVISIONAL d. Package 14.4 x 9.2 x 4.7 mm max. 2.0 Absolute Maximum Ratings 1 Min.
VS-701 High Shock Discrete Voltage Controlled SAW Oscillator
VS-701 High Shock Discrete Voltage Controlled SAW Oscillator VS-701 The VS-701 VCSO (Voltage Controlled Saw Oscillator from Vectron is a high frequency, ultra low phase noise oscillator designed to support
Performance Specifications
OX-280 Oven Controlled Crystal Oscillator OX-280 Features Surface Mount Package AT-CUT and SC_CUT Crystal Options Low Profile Compact Package Compact Package Applications Base stations Test equipment Synthesizers
Chapter 6 Specifications
RIGOL This chapter lists the technical specifications and general specifications of the RF signal generator. The technical specifications are valid when the instrument is within the calibration period,
Chapter 6 Specifications
RIGOL This chapter describes the specifications of RF signal generator. Specifications are valid under the following conditions: the instrument in the calibration cycle is stored at least two hours at
Low-G 222 Series OCXO
Low-G 222 Series OCXO The 222 Series is a rugged Oven Controlled Crystal Oscillator ideal for demanding military applications such as UAVs, rotorcraft, and tracked vehicles as well as harsh industrial
Oven Controlled Crystal Oscillators
Moisture Sensitivity Level (MSL) 1 OVERVIEW: Abracon s AOCJYR series of World s Smallest Profile, Surface Mount- Ovenized Quartz Crystal Oscillators are based on Proprietary MercuryTM ASIC technology,
Oven Controlled Crystal Oscillators
Moisture Sensitivity Level (MSL) 1 OVERVIEW: Abracon s AOCJYR series of World s Smallest Profile, Surface Mount- Ovenized Quartz Crystal Oscillators are based on Proprietary MercuryTM ASIC technology,
Typical Applications Base Stations Test Equipment Synthesizers. Frequency stabilities 1 [Standard]
![Typical Applications Base Stations Test Equipment Synthesizers. Frequency stabilities 1 [Standard]](/thumbs/96/128719484.jpg "Typical Applications Base Stations Test Equipment Synthesizers. Frequency stabilities 1 [Standard]")
PX-701 Clock Oscillator Features Reflow Process Compatible Surface Mount Package AT-Cut Crystal SONET Minimum Clock Specification Low Phase Noise Tight Tolerances Typical Applications Base Stations Test
SC5407A/SC5408A 100 khz to 6 GHz RF Upconverter. Datasheet. Rev SignalCore, Inc.
SC5407A/SC5408A 100 khz to 6 GHz RF Upconverter Datasheet Rev 1.2 2017 SignalCore, Inc. support@signalcore.com P R O D U C T S P E C I F I C A T I O N S Definition of Terms The following terms are used
Space Xtal Oscillator TE 100 XO Series 100
For this product, a full detailed specification can also be delivered on request. Specific request can be addressed to RAKON info@rakon.fr Product Description This SMD Space XO is designed for space clock
MX-503 High Precision Microprocessor Controlled Crystal Oscillator
MX-503 High Precision Microprocessor Controlled Crystal Oscillator MX-503 Features Ultra High Stability MCXO Low Power Consumption Meets Stratum 3 acc. GR-1244 ROHS 6 Compliant Frequency Range 1 : 8-50
Model 845-M Low Noise Synthesizer
Model 845-M Low Noise Synthesizer Features Low phase noise Fast switching down to 20 µs FM, Chirps, Pulse Internal OCXO, external variable reference Single DC supply Applications ATE LO for frequency converters
Model MHz Arbitrary Waveform Generator Specifications
50MHz Arbitrary Waveform Generator s DISPLAY: Graph mode for visual verification of signal settings. CAPABILITY: Standard waveforms: Sine, Square, Ramp, Triangle, Pulse, Noise, DC Built-in arbitrary waveforms:
Rakon Product Proposal
IT2200A -- SMD Temperature Compensated Crystal Oscillators -- -- Low cost SMD TCXO with voltage control option using an analogue IC for compensation. Frequencies ranging from 10MHz to 52MHz. -- Product
125 Series FTS375 Disciplined Reference and Synchronous Clock Generator
Available at Digi-Key www.digikey.com 125 Series FTS375 Disciplined Reference and Synchronous Clock Generator 2111 Comprehensive Drive Aurora, Illinois 60505 Phone: 630-851- 4722 Fax: 630-851- 5040 www.conwin.com
Preliminary Rev. M Accusilicon AS318-B Series Professional Audiophile Crystal Oscillator
Accusilicon AS318-B Series Professional Audiophile Crystal Oscillator Features Extremely low close-in phase noise, designed for professional Audiophile & Recording application. Typical -100dBc @ 10Hz at
OX-400 / OX 401 Oven Controlled Crystal Oscillator
OX-400 / OX 401 Oven Controlled Crystal Oscillator OX-400 / 401 Features 4-Pin Dip Fast warm-up TCXO replacement for better short term stability Frequency Range, 10 MHz to 40 MHz Standard frequencies,
±0.1 ppm ±5 % ±0.1 ppm ±10 % 10 kω // 10 pf
Nominal frequency Fo Frequency stability: vs. temperature reference to (FMAX+FMIN)/2 vs. supply voltage changes reference to frequency at nominal supply vs. load changes reference to frequency at nominal
PS-701 SAW Oscillator
PS-701 SAW Oscillator PS-701 The PS-701 SO (Saw Oscillator from Vectron is a high frequency, ultra low phase noise oscillator designed to support high speed data converters and 100G / 400G coherent optical
RFPT Specifications. The CHARON is a SPI controlled high accuracy TCXO with embedded timer and alarm function. Product description
RFPT200 -- The CHARON is a SPI controlled high accuracy TCXO with embedded timer and alarm function. -- -- The Charon is a high stability 7x5 SMD Digitally Controlled Temperature Controlled Crystal Oscillator
SC5307A/SC5308A 100 khz to 6 GHz RF Downconverter. Datasheet SignalCore, Inc.
SC5307A/SC5308A 100 khz to 6 GHz RF Downconverter Datasheet 2017 SignalCore, Inc. support@signalcore.com P RODUCT S PECIFICATIONS Definition of Terms The following terms are used throughout this datasheet
THE PHS 8340 FAMILY OF HIGH VALUE BROADBAND MICROWAVE SYNTHESIZERS
SUBTITLE THE PHS 8340 FAMILY OF HIGH VALUE BROADBAND MICROWAVE SYNTHESIZERS BENCHTOP Multi Output MODULAR HANDHELD The PHS 8340 Family SUBTITLE Features: Standard Range: 700 MHz to 18 GHz Extendable to
125 Series FTS125-CTV MHz GPS Disciplined Oscillators
Available at Digi-Key www.digikey.com 125 Series FTS125-CTV-010.0 MHz GPS Disciplined Oscillators 2111 Comprehensive Drive Aurora, Illinois 60505 Phone: 630-851- 4722 Fax: 630-851- 5040 www.conwin.com
Wave Form: Square x 20.2 x 5.88H [0.504 x x 0.231] G8 500 khz ~ 170 MHz 4 pin DIL half size
![Wave Form: Square x 20.2 x 5.88H [0.504 x x 0.231] G8 500 khz ~ 170 MHz 4 pin DIL half size](/thumbs/91/106537005.jpg "Wave Form: Square x 20.2 x 5.88H [0.504 x x 0.231] G8 500 khz ~ 170 MHz 4 pin DIL half size")
V C X O G series What is a VCXO? Logic: TTL / CMOS Wave Form: Square MERCURY Since 1973 Unlike regular clock oscillator which has fixed output frequency, the output frequency of a VCXO (also known as frequency
HELLAS INDUSTRIES. for custom designs since 1980 in. Custom RF Filter & Frequency Control Solutions. Defence Avionics Medical Telecom
HELLAS Custom RF Filter & Control Solutions The Choice for custom designs since 1980 in Monolithic Crystal Filters Discrete Crystal Filters LC Filters Switch Filter assemblies Oscillators INDUSTRIES Defence
Data Sheet SC5317 & SC5318A. 6 GHz to 26.5 GHz RF Downconverter SignalCore, Inc. All Rights Reserved
Data Sheet SC5317 & SC5318A 6 GHz to 26.5 GHz RF Downconverter www.signalcore.com 2018 SignalCore, Inc. All Rights Reserved Definition of Terms 1 Table of Contents 1. Definition of Terms... 2 2. Description...
C5310. Tight Stability. 1 MHz 700 MHz
Typical Applications Base Stations Test Equipment Switching Portable Equipment Frequency range Standard frequencies Features Surface Mount Package Reflow Process Compatible AT-Cut Crystal Low Phase Noise
THE PHS 8500 FAMILY OF VERY LOW PHASE NOISE HIGH PERFORMANCE MICROWAVE SYNTHESIZERS BENCHTOP
SUBTITLE THE PHS 8500 FAMILY OF VERY LOW PHASE NOISE HIGH PERFORMANCE MICROWAVE SYNTHESIZERS BENCHTOP MODULAR HANDHELD The PHS 8500 Family SUBTITLE Features: Standard Range : 700 MHz to 18 GHz Extendable
Model 745 Series. Berkeley Nucleonics Test, Measurement and Nuclear Instrumentation since Model 845-M Specification 1.8 BNC
Specification 1.8 Model 745 Series 0.01-20.0 GHz Low Phase Noise Synthesizer 250 fs Digital Delay Generator Berkeley Nucleonics Test, Measurement and Nuclear Instrumentation since 1963 Introduction The
VX-505 Voltage Controlled Crystal Oscillator Extended Temperature
VX-505 Voltage Controlled Crystal Oscillator Extended Temperature VX-505 Features AT-Cut Crystal Surface Mount FR4 based package Reflow Process Compatible Extended temperature range -55..+125 C Low Tight
OCXO AND CLOCK DISTRIBUTION SYSTEM. As used with VE2ZAZ Controller
OCXO AND CLOCK DISTRIBUTION SYSTEM As used with VE2ZAZ Controller Jacques Audet VE2AZX June 2011 Rev. Jan 2013 REAR BLOCK DIAGRAM MV89A OSCILLATOR MODULE FRONT 12 +12 dbm +15V ZFSC-8-1 +12 dbm +12 dbm
Performance Specifications. Frequency Stabilities 1 ( MHz) -20 to +70 C -40 to +85 C -40 to +95 C Residual error compare to fit curve
MD-403 I2C InterfaceOven Controlled Crystal Oscillator MD-403 The MD-403 is a Vectron module that contains a medium size ovenized crystal oscillator and an I 2 C interface that communicates with an onboard
G5100A: 50 MHz Arbitrary Function Generator
G5100A: 50 MHz Arbitrary Function Generator Key Features 50 MHz Sine Wave 25 MHz Square Wave Pulse, Ramp, Triangle, Noise, and DC waveforms AM, FM, PM, FSK, and PWM modulation types Linear & logarithmic
Performance Specifications. Frequency Stabilities 1 ( 10 & 20 MHz)
MD-223 I 2 C Interface Oven Controlled Crystal Oscillator Preleminary version MD-223 The MD-223 is a Vectron module that contains a medium size ovenized crystal oscillator and an I 2 C interface that communicates
Block Diagram. Figure 1. Functional Block Diagram
MD-171 High Stability GNSS (GPS and GLONASS) Disciplined Oscillator Module MD-171 The MD-171 is a Vectron GNSS disciplined module. It is a fully integrated GNSS disciplined oscillator module in a compact
MG3740A Analog Signal Generator. 100 khz to 2.7 GHz 100 khz to 4.0 GHz 100 khz to 6.0 GHz
Data Sheet MG3740A Analog Signal Generator 100 khz to 2.7 GHz 100 khz to 4.0 GHz 100 khz to 6.0 GHz Contents Definitions, Conditions of Specifications... 3 Frequency... 4 Output Level... 5 ATT Hold...
Stratum 3 Simplified Control Timing Modules (MSTM-S3-T2NC)
DESCRIPTION The Connor-Winfield Stratum 3 Miniature Simplified Control Timing Module acts as a complete system clock module for general Stratum 3 timing applications. The MSTM is designed for external
Oven Controlled Crystal Oscillators
Moisture Sensitivity Level (MSL) 1 OERIEW: Abracon s AOCJYR series of World s Smallest Profile, Surface Mount- Ovenized Quartz Crystal Oscillators are based on Proprietary MercuryTM ASIC technology, patented
CMOS Sine. 3.3, 5.0, 12.0 or 15.0Vdc. 3.3, 5.0, 12.0 or 15.0Vdc. CMOS Sine. CMOS Sine. 3.3, 5.0, 12.0 or 15.0Vdc. LVDS (1 to 4 pairs) 3.
Q-TECH Q-Tech is the leading supplier of crystal controlled oscillators for space applications. Q-Tech has 40 years space heritage, is AS9100 certified, is the leading QPL supplier to MIL-PRF-55310 class
TX-705 Temperature Compensated Crystal Oscillator
TX-705 Temperature Compensated Crystal Oscillator TX-705 Features Applications The TX-705 is a TCXO family designed for applications where superior g-sensitivity and good phase noise together with small
SC5306B 1 MHz to 3.9 GHz RF Downconverter Core Module. Datasheet SignalCore, Inc.
SC5306B 1 MHz to 3.9 GHz RF Downconverter Core Module Datasheet 2015 SignalCore, Inc. support@signalcore.com SC5306B S PECIFICATIONS Definition of Terms The following terms are used throughout this datasheet
Reflow Process Compatible Low Phase Noise Build in PLL-Circuit
Typical Applications Base Stations Features Surface Mount Package Reflow Process Compatible Low Phase Noise Build in PLL-Circuit Output Frequency range Standard frequencies 10 MHz 700 MHz 10; 25; 26; 39.3216;
T C X O and Logic: TTL / HCMOS V C T C X O Wave Form: Square Wave
T C X O and Logic: TTL / HCMOS V C T C X O Wave Form: Square Wave Product Summary: SQUARE MERCURY Since 1973 TCXO VCTCXO Available Frequency Range Output Wave Form: Square Wave Package size (mm), L x W