Low Noise Oscillator series LNO 100 OCXO LNO 100
|
|
|
- Ashlee Harper
- 5 years ago
- Views:
Transcription
1 Specific request can be addressed to RAKON Product Description This Low Noise Oven Controlled Crystal Oscillator available in different formats from 51x51x25 mm (2 x2 x1 ) till 25x25x12 mm (1 x1 x0.5 ), is specially designed to meet the request of the most demanding phase noise applications in the instrumentation and defence industries. The LNO 100 MHz can be provided with a guaranteed phase noise level of up to KHz and a G-sensitivity of up to 0.5 ppb/g (Gamma). Features Low Noise Oscillator (LNO), Oven Controlled Crystal Oscillator (OCXO) Frequency: 80 to 125 MHz Guaranteed low phase 100 MHz: kHz kHz Supply Voltage: +12V Pin through hole, SMD package or with connectors Frequency Stability vs. Temperature: ± 0.1ppm Ageing: from ± 2ppm over 10 years Typical phase noise 100 MHz Courtesy Noise XT Applications Reference for phase noise measurement Test equipments Military communication Synthesizers Radars Shortform, , Issue A1 1 / 9
2 Specifications 1. Environmental conditions 2. Electrical interface 3. Performances Parameters Conditions/remarks Min Nom Max Unit Option A C Operating Temperature Option B C Option C C Switch-on Temperature TSo C Non-Operating Temperature TNOp C Sine Vibration Level as per MIL-PRF-28800F, Class 3, test equipment Shock Level as per MIL-PRF-28800F, Class 3, test equipment Parameters Conditions/remarks Min Nom Max Unit Power supply Option V Load Impedance Ω Control voltage 0 10 V Input impedance 10 κω Parameters Conditions/Remarks Min Typ Max Unit Nominal Frequency MHz Relative pulling frequency range (negative slope) ± 2 ppm Steady state supply current 25 C 2.2 W Warm up supply current Frequency achievement 5mn after start 25 C 3.7 W Initial frequency 25 C ; Vc = Vcnom ± 0.5 ppm Option A ± 0.1 ppm Frequency stability vs temperature Option B ± 0.2 ppm Option C ± 0.5 ppm Frequency variation vs. supply voltage Vcc C ± 0.01 ppm Frequency variation vs. load For ±10% variation of load ± 0.02 ppm Frequency ageing 1st year ± 0.5 ppm after 30 days of continuous operation 10 years ± 2 ppm Allan Variance 1s ± 5E-12 After 10s ± 0.5 ppb Frequency warm up 5 mn G-sensitivity Option SG: total Gamma ± 2 ppb/g Option LG: total Gamma ± 0.5 ppb/g Output waveform Sine Output level dbm Harmonics level -25 dbc Spurious level -90 dbc Shortform, , Issue A1 2 / 9
3 4. Minimum Guaranteed Phase Noise level Parameters Performance level 100 Hz 1 KHz 10 KHz 100 KHz Unit MHz, 12 V dbc/hz -20 C to +70 C dbc/hz For performance levels at other frequencies or temperature ranges, please consult your sales office. 5. Mechanical features Package name Description Dimensions PTH1 Pin Through Hole 1.5 x1.5 x0.5 38x38x13 mm PTH2 Pin Through Hole Europack 1.5 x1 x0.5 38x25x13 mm PTH3 Pin Through Hole 1 x1 x0.5 25x25x13 mm PSS1 Pin Side+SMA 2 x2 x1 51x51x25 mm SMD1 SMD 1 x1 x0.5 25x25x13 mm Shortform, , Issue A1 3 / 9
4 5.1. Package PTH1 (Pin Through Hole) Pin number Name Description 1 Vcc Supply voltage 2 GND Electrical & mechanical ground 3 GND Electrical & mechanical ground 4 Fout Frequency output 5 Vc Voltage control for electrical tuning Shortform, , Issue A1 4 / 9
5 5.2. Package PTH2 (Pin Through Hole) Pin number Name Description 1 Vc Voltage control for electrical tuning 2 Vref Voltage reference 3 Vcc Supply voltage 4 Fout Frequency output 5 GND Electrical & mechanical ground Shortform, , Issue A1 5 / 9
6 5.3. Package PTH3 (Pin Through Hole) Pin number Name Description 1 Fout Frequency output 2 GND Electrical & mechanical ground 3 Vc Voltage control for electrical tuning 4 GND Electrical & mechanical ground 5 Vcc Supply voltage Shortform, , Issue A1 6 / 9
7 5.4. Package PSS1 (Pin Side+SMA) Pin number Name Function 1 Fout Frequency output 2 Vc Voltage control for electrical tuning 3 Vref Reference voltage 4 Vcc Supply voltage 5 GND Electrical & mechanical ground Shortform, , Issue A1 7 / 9
8 5.5. Package SMD1 (Surface Mount Device) Pin number Name Description 1 NC Not Connected 2 NC Not Connected 3 Vcc Supply voltage 4 Fout Frequency output 5 GND Electrical & mechanical ground Shortform, , Issue A1 8 / 9
9 6. Ordering part number definition The part number breakdown is defined as follows: LNO100 PTH3 LG 65 A M Series Package PTH1 = 1.5 x1.5 x0.5 Pin Through Hole PTH2 = 1.5 x1 x0.5 Pin Through Hole PTH3 = 1 x1 x0.5 Pin Through Hole PSS1 = 2 x2 x1 Pin Side + SMA SMD1 = 1 x1 x0.5 SMD G-sensitivity SG : 2 ppb/g LG : 0.5 ppb/g Guaranted phase noise level 58 : -158 dbc/hz@1khz, -172 dbc/hz@10khz 62 : -162 dbc/hz@1khz, -175 dbc/hz@10khz 65 : -165 dbc/hz@1khz, -178 dbc/hz@10khz Temperature range/stability A = 0 C to +70 C, ± 0.1 ppm B = -20 C to +70 C, ± 0.2 ppm C = -40 C to +85 C, ± 0.5 ppm Supply voltage 12 = 12V Frequency, fnom Shortform, , Issue A1 9 / 9
Low Noise Oscillator series LNO 100 OCXO LNO 100
Specific request can be addressed to RAKON info@rakon.fr Product Description This Low Noise Oven Controlled Crystal Oscillator available in different footprints from 38x38x22 mm (1.5 x1.5 x0.8 ) till 25x22x12
TE 300 TCXO Series 300
For this product, a full detailed specification can also be delivered on request. Specific request can be addressed to RAKON info@rakon.fr Product Description This High performance ITAR-Free Flat Pack
RK 409. Parameters Conditions/remarks Min Nom Max Unit
For this product, full and detailed specifications can be delivered on request. Specific request can be addressed to RAKON hirel@rakon.com Product Description This stable oscillator is designed for Space
Low Noise Oscillator series LNO 4800 B MHz
Specific request can be addressed to RAKON hirel@rakon.com Product Description LNO 4800 B3 is a low noise oscillator generating an output signal at 4800 MHz. It is composed by an OCSO (Oven Controlled
Space Xtal Oscillator TE 100 XO Series 100
For this product, a full detailed specification can also be delivered on request. Specific request can be addressed to RAKON info@rakon.fr Product Description This SMD Space XO is designed for space clock
O-CDFEXYZXX-X-X-10MHz/100MHz Precision Ultra Low Phase Noise Dual Frequency OCXO Reference Module (DFRM)
O-CDFEXYZXX-X-X-10MHz/100MHz Precision Ultra Low Phase Noise Dual Frequency OCXO Reference Module (DFRM) Rev C The DFRM consists of 2 Ultra Low Phase Noise OCXO at 10 MHz and 100 MHz. The module is packaged
O-CXM-XXYZXX-X-X-XX-X Precision Ultra Low Phase Noise OCXO in 36x27 mm Europack with optional Adapter to 2 x2
Product Data Sheet Rev K O-CXM-XXYZXX-X-X-XX-X Precision Ultra Low Phase Noise OCXO in 36x27 mm Europack with optional Adapter to 2 x2 Description O-CX Series is based on Ultra Low Noise 10 MHz reference
Specification AXIOM210 Rev.: 3 Date: Oscillator type: Ultra-Low Phase Noise OCXO in Vibration-isolated Package
in Specification AXIOM210 Rev.: 3 Date: 2015-02-17 Oscillator type: Ultra-Low Phase Noise OCXO in Vibration-isolated Package Parameter min. typ. max. Unit Condition Frequency range 50 130 MHz Standard
OX-304 at 10 MHz Ultra Low Phase Noise Oven Controlled Crystal Oscillator
OX-304 at 10 MHz Ultra Low Phase Noise Oven Controlled Crystal Oscillator OX-304 The OX-304 is an Ultra Low Phase Noise Ovenized Crystal Oscillator with a noise floor as low as -173 dbc/hz in a compact
O-CS22-HH-0XYZXX-X-X-X-X Series Precision Ultra Low Phase Noise OCXO in Low Profile 22x25x10 mm SMD package
O-CS22-HH-0XYZXX-X-X-X-X Series Precision Ultra Low Phase Noise OCXO in Low Profile 22x25x10 mm SMD package Product Data Sheet Rev E Features SC-cut crystal High Stability Low Profile (10 mm) SMD package
OX-175 Ultra Low Noise Oven Controlled Crystal Oscillator
OX-175 Ultra Low Noise Oven Controlled Crystal Oscillator OX-175 The OX-175 is a low phase noise, high-frequency ovenized crystal oscillator in a 28 x 38 mm package. The oscillator has a noise floor of
OX-204 at 10 MHz Ultra Low Phase Noise Oven Controlled Crystal Oscillator
OX-204 at 10 MHz Ultra Low Phase Noise Oven Controlled Crystal Oscillator OX-204 OX-204 The OX-204 is an Ultra Low Phase Noise Ovenized Crystal Oscillator with a noise floor as low as -175 dbc/hz. Designed
OX-175 Ultra Low Noise Oven Controlled Crystal Oscillator
OX-175 Ultra Low Noise Oven Controlled Crystal Oscillator OX-175 The OX-175 is a low phase noise, high-frequency ovenized crystal oscillator in a 28 x 38 mm package. The oscillator has a noise floor of
2.0 FREQUENCY CHARACTERISTICS Line Parameter Test Condition Value Unit 2.1 Nominal frequency range
CFPT9000 -- SMD Temperature Compensated Crystal Oscillator (PLUTO) -- -- A series of surface mountable 7.0x5.0mm Temperature Compensated Voltage Controlled Crystal Oscillators (TCVCXOs) for medium to high
Package Type: 0 Through Hole Supply Voltage: V V V Logic: HCMOS Sine Wave
Description Q-Tech s High Stability OCXO is a high reliability signal generator that provides an HCMOS or Sine Wave output. The OCXO is available in a Through hole package. A flexible design allows Q-Tech
Oven Controlled Crystal Oscillator OCXO SERIES 8100
FEATURES IEEE 1588 compatible Frequencies up to 100 MHz ELECTRICAL SPECIFICATIONS Frequency Range* fo 5.000 100.000 MHz Supply Voltage Vs Vs ±5% Power Consumption Warm-up Time Frequency Calibration Frequency
OX-043 Low g-sensitivity Oven Controlled Crystal Oscillator
OX-043 Low g-sensitivity Oven Controlled Crystal Oscillator OX-043 Features Applications Ultra Low g-sensitivity Low Phase Noise High Stability Frequency Range: 8 MHZ to 15 MHZ Standard Frequency 10 MHz
Stability as AXIOM9000 plus low noise high isolation frequency distribution amplifier with 4 to 16 outputs
in Specification AXIOM9000 Rev.: 1 Date: 2016-07-01 Oscillator type: Very High Stability Ultra-Low Noise Reference (D)OCXO in 19 rack (1 HU) with up to 3 outputs Features: Very High Frequency Stability
RFPT Specifications. SMD Low Acceleration Sensitivity TCXO / TCVCXO. Product description. Applications
RFPT705 -- SMD Low Acceleration Sensitivity TCXO / TCVCXO. -- -- A series of surface mountable Temperature Compensated Voltage Controlled Crystal Oscillators (TCVCXO) for applications where phase noise
O C X O Oven Controlled Crystal Oscillators
What is an OCXO? Relatively speaking, an OCXO performs in the ±0.01~±0.1 ppm range, a TCXO performs in the ±1~±3 ppm range while a non-compensated clock oscillator performs in the ±25, ±50 ppm range. A
Flight Model (FM) Lot Acceptance Test Model (LAT) Quartz Crystal. Synthetic HiQ Quartz, SC-cut, HC-35/U 4-point
in Specification AXIOM75SH Rev.: 1 Date: 2018-02-16 Oscillator type: Low Phase Noise OCXO for Space Application (COTS version) Features: Lower cost Commercial Off-The-Shelf version (COTS) Qualified according
Performance Specifications
OX-208 Oven Controlled Crystal Oscillator OX-208 OX-208 The OX-208 is a high stability ovenized crystal oscillator in a 25 x 25 mm package, capable of aging rates of 0.15 /day and temperature stabilities
OX-046 VHF low g-sensitivity Oven Controlled Crystal Oscillator
OX-046 VHF low g-sensitivity Oven Controlled Crystal Oscillator OX-046 Features Ultra Low G-Sensitivity Low Phase Noise Very High Frequency Frequency Range: 50 MHZ to 250 MHZ Standard Frequency: 100 MHz
OD100LP-Series Low Phase Noise
OD100LP-Series Low Phase Noise VCOCXO1 Description: The Connor-Winfield OD100LP-series is a low phase noise VCOCXO in a 1x1 inch metal package. The OD100LP-series is designed for those applications that
OX-171 Oven Controlled Crystal Oscillator
OX-171 Oven Controlled Crystal Oscillator OX-171 The OX-171 is a high stability ovenized crystal oscillator in a 28 x 38 mm package, capable of aging rates of 0.06 /day and temperature stabilities of 1
HELLAS INDUSTRIES. for custom designs since 1980 in. Custom RF Filter & Frequency Control Solutions. Defence Avionics Medical Telecom
HELLAS Custom RF Filter & Control Solutions The Choice for custom designs since 1980 in Monolithic Crystal Filters Discrete Crystal Filters LC Filters Switch Filter assemblies Oscillators INDUSTRIES Defence
MX-041 Oven Controlled Crystal Oscillator
MX-041 Oven Controlled Crystal Oscillator MX-041 Features Applications SC-Cut resonator Frequency Range: 5 MHZ to 20 MHZ Low Package Height Temperature stability to 0.4 Aging rate 0.1 /day Frequency range
VX-990 Voltage Controlled Crystal Oscillator Ultra Low Noise and G-Sensitivity
VX-990 Voltage Controlled Crystal Oscillator Ultra Low Noise and G-Sensitivity VX-990 Ultra low Phase Noise Ultra low G-Sensitivity Vibration hardened Tight Tolerances Frequency Range Standard Frequency
Low-G 222 Series OCXO
Low-G 222 Series OCXO The 222 Series is a rugged Oven Controlled Crystal Oscillator ideal for demanding military applications such as UAVs, rotorcraft, and tracked vehicles as well as harsh industrial
PRELIMINARY. Logic: C = CMOS S = Sine Wave
Description Q-Tech s microcomputer compensated crystal oscillator, MCXO, uses a high stability overtone SC-cut crystal with microprocessor controlled compensation. The self-temperature sensing resonator,
OCXO 8600 BVA Oven Controlled Crystal Oscillator
BVA Oven Controlled Crystal Oscillator The 8600-B series is based on the technique of housing a state-of-the-art BVA crystal resonator and its associated oscillator components in double oven technology.
Oven Controlled Crystal Oscillator OCXO SERIES IEEE 1100
ELECTRICAL SPECIFICATIONS Min. Typ. Max. Frequency Range* fo 10.000 50.000 MHz Supply Voltage Vs Vs ±5% Power Consumption Warm-up Time Frequency Calibration Frequency Stability vs. Temperature* 3.135 3.3
MD-173 High Stability Coefficient Oscillator I C interface Oven Controlled Crystal Oscillator
MD-173 High Stability Coefficient Oscillator I C interface Oven Controlled Crystal Oscillator 2 MD-173 The MD-173 is a Microsemi Coefficient Oscillator (CCXO) that contains a high-stability ovenized crystal
2.0 Absolute Maximum Ratings 1 Parameter Min. Max. Unit.
RFPO45 G.8263 1.0 Specification References a. Rakon part number (Doc ID) M6635LF (514241) b. 25.0MHz MERC 9x7 HOT CMOS 3.3V c. Version 1 (2014-04-01) d. Package 9.7 x 7.5 x 4.3 mm max. 2.0 Absolute Maximum
Typical Applications Satellite and Deep Space Radiation Tolerance Required Severe Environmental Conditions. 10 MHz 40 MHz 10, 20 MHz
EX-209 Hi-Reliability Evacuated Miniature Crystal Oscillator EX-209 Features 16 pin Double Dip Package Ruggedized hybrid thick film construction Low Power Consumption Legacy Model: EX-245 Typical Applications
OX-249 Space Qualified Oven Controlled Crystal Oscillator (OCXO)
Common Characteristics [all frequencies and options] Supply voltage 4.75 5.0 5.25 VDC Power consumption (in air) Frequency vs. Temperature (ref. frequency at 60 minutes) Warm-up Accuracy @+25 C, (ref.
Lead Finish: T = Standard S = Solder Dip (**) Package Type: 0 = DIP-14 1 = SMD 2 = Gull Wing Supply Voltage: 3 = +3.3V 5 = +5.0V
Description The Q-Tech Analog TCXO encompasses state-of-the-art oscillators with low phase noise, jitter, and tight temperature stability. The TCXO is available in a DIP (QT3003), SMD (QT3013) or Gull
VS-701 High Shock Discrete Voltage Controlled SAW Oscillator
VS-701 High Shock Discrete Voltage Controlled SAW Oscillator VS-701 The VS-701 VCSO (Voltage Controlled Saw Oscillator from Vectron is a high frequency, ultra low phase noise oscillator designed to support
Model 865-M Wideband Synthesizer
Model 865-M Wideband Synthesizer Features Wideband Low phase noise Fast switching down to 20 µs FM, Chirps, Pulse Internal OCXO, external variable reference Single DC supply Applications ATE LO for frequency
PXI MICROWAVE LOCAL OSCILLATOR MODULE
The PXI-1450B Local Oscillator Module is a PXI 3U, 2-slot synthesizer module intended for frequency down conversion applications. The PXI-1450B is a VCO-based, 3 to 9 GHz synthesizer that uses QuickSyn
Performance Specifications
OX-280 Oven Controlled Crystal Oscillator OX-280 Features Surface Mount Package AT-CUT and SC_CUT Crystal Options Low Profile Compact Package Compact Package Applications Base stations Test equipment Synthesizers
CMOS/LVCMOS HF VCXO AE-X32BXX-X Series
CMOS/LVCMOS HF VCXO Description The AE-X32BXX Series of voltage controlled crystal oscillators (VCXO) provides high frequency with CMOS/LVCMOS output. The device does not use any frequency multiplication,
PX-990 Crystal Oscillator Ultra Low Noise and G-Sensitivity
PX-990 Crystal Oscillator Ultra Low Noise and G-Sensitivity PX-990 Ultra low Phase Noise Ultra low G-Sensitivity Vibration hardened Tight Tolerances Frequency Range Standard Frequency Features 60-120MHz
Rubidium Frequency Standard Model AR133A Ruggedized Low Profile
Rubidium Frequency Ruggedized Low Profile Key Features Long-term-stability: 5E-11/month Short term stability: 2E-12 @ 1000s (Typ.) Phase noise: -158 dbc/hz @10kHz Spurious: < -110 dbc Time Accuracy (1PPS):
±0.1 ppm ±5 % ±0.1 ppm ±10 % 10 kω // 10 pf
Nominal frequency Fo Frequency stability: vs. temperature reference to (FMAX+FMIN)/2 vs. supply voltage changes reference to frequency at nominal supply vs. load changes reference to frequency at nominal
Model 865-M Wideband Synthesizer
Model 865-M Wideband Synthesizer Features Wideband Low phase noise Fast switching down to 15 µs FM, Chirps, Pulse Internal OCXO, external variable reference Single DC supply Applications ATE LO for frequency
DS H01 DIGITAL SYNTHESIZER MODULE SYSTEM SOLUTIONS. Features Applications 174 x 131 x 54 mm. Technical Description
DS H01 The DS H01 is a high performance dual digital synthesizer with wide output bandwidth specially designed for Defense applications where generation of wideband ultra-low noise signals along with very
Advancements in Quartz Based Oscillator Technologies Advanced Timing for High Speed Connectivity
Advancements in Quartz Based Oscillator Technologies Advanced Timing for High Speed Connectivity 2015 2017 Rakon Limited 0 CONFIDENTIAL INFORMATION Topics Background Resonator Improvements Profile, Power
2.0 Absolute Maximum Ratings 1 Parameter Min. Max. Unit. a. Storage temperature C b. Supply voltage (VDD) V
E7157LF 1.0 Specification References a. Rakon part number E7157LF b. 100.0MHz RHT1490A TCVCXO c. Version D (2016-12-12) PROVISIONAL d. Package 14.4 x 9.2 x 4.7 mm max. 2.0 Absolute Maximum Ratings 1 Min.
INC. MICROWAVE. A Spectrum Control Business
DRO Selection Guide DIELECTRIC RESONATOR OSCILLATORS Model Number Frequency Free Running, Mechanically Tuned Mechanical Tuning BW (MHz) +10 MDR2100 2.5-6.0 +10 6.0-21.0 +20 Free Running, Mechanically Tuned,
VCXO OSCILLATORS. Package # VC20 (VCXO) Package # VC08. Test Circuit #2 (CMOS) (VCXO) Package # VC29 (SMD VCXO) Package # VC30 (SMD VCXO)
6 7.62 ± 0.20 5.0 0.8 3.20 5.0 Typ. 9.0 ±.5 2.8 max 6.8 max 0.8 6.8 5.3 max 5. Many applications, such as telecom switching systems, local area networks (LAN) and video applications, voltage controlled
Rubidium Frequency Standard Model AR133A Ruggedized Low Profile
Ruggedized Low Profile Key Features Long-term-stability: 5E-11/month 2E-12 frequency accuracy & 100nSec 1PPS accuracy relative to 1PPS input when disciplined Short term stability: 5E-12 @ 100s Phase noise:
Model 865 RF / Ultra Low Noise Microwave Signal Generator
Model 865 RF / Ultra Low Noise Microwave Signal Generator Features Excellent signal purity: ultra-low phase noise and low spurious Combination of highest output power and fastest switching Powerful touch-display
STRATUM 3E High Stability Oven Stabilized Oscillator OH300 Series OCXO / VCOCXO
Available at Digi-Key** www.digikey.com STRATUM 3E High Stability Oven Stabilized Oscillator OH300 Series OCXO / VCOCXO US Headquarters: 630-851-4722 European Headquarters: +353-61-472221 Description Connor-Winfield
Model 845-M Low Noise Synthesizer
Model 845-M Low Noise Synthesizer Features Low phase noise Fast switching down to 20 µs FM, Chirps, Pulse Internal OCXO, external variable reference Single DC supply Applications ATE LO for frequency converters
C
Typical Applications Base Stations Test Equipment Synthesizers Digital Switching Features Surface Mount Package Optional Reflow Process Compatible Optional AT-Cut and SC-Cut Crystal Options Low Profile
VS-507 Voltage Controlled SAW Oscillator
VS-507 Voltage Controlled SAW Oscillator VS-507 Description The VS-507 VCSO (Voltage Controlled Saw Oscillator from Vectron is an ultra high frequency, ultra low phase noise oscillator. The VS-507 provides
CMOS Sine. 3.3, 5.0, 12.0 or 15.0Vdc. 3.3, 5.0, 12.0 or 15.0Vdc. CMOS Sine. CMOS Sine. 3.3, 5.0, 12.0 or 15.0Vdc. LVDS (1 to 4 pairs) 3.
Q-TECH Q-Tech is the leading supplier of crystal controlled oscillators for space applications. Q-Tech has 40 years space heritage, is AS9100 certified, is the leading QPL supplier to MIL-PRF-55310 class
OX-200 Oven Controlled Crystal Oscillator
OX-200 Oven Controlled Crystal Oscillator OX-200 Features Reflow Process Compatible AT-Cut and SC-Cut Crystal Options Low Profile Compact Package Applications Base Stations Test Equipment Synthesizers
Features. = +25 C, Vcc = +5V [1]
![Features. = +25 C, Vcc = +5V [1]](/thumbs/80/81652748.jpg "Features. = +25 C, Vcc = +5V [1]")
Typical Applications Low Noise wideband MMIC VCO is ideal for: Features Wide Tuning Bandwidth Industrial/Medical Equipment Test & Measurement Equipment Military Radar, EW & ECM Functional Diagram Pout:
Features. = +25 C, Vcc = +5V. Parameter Min. Typ. Max. Units Frequency Range GHz Power Output 3 dbm SSB Phase 10 khz Offset -60 dbc/hz
Typical Applications Low Noise wideband MMIC VCO is ideal for: Industrial/Medical Equipment Test & Measurement Equipment Military Radar, EW & ECM Functional Diagram Features Wide Tuning Bandwidth Pout:
EX-421 Evacuated Miniature Crystal Oscillator
EX-421 Evacuated Miniature Crystal Oscillator EX-421 Description The EX-421 provides exceptionally low aging rates and tight temperature stabilities in an extremely small package over a wide range of environmental
Ultra-Low Phase Noise OCXO
APPLICATIONS: COTS Military & Industrial Radios & Timing Circuits Cellular Infrastructure Radar Systems Test & Measurement Equipment GPS Tracking with precision hold-over accuracy WiMax / WLAN Precision
SC5306B 1 MHz to 3.9 GHz RF Downconverter Core Module. Datasheet SignalCore, Inc.
SC5306B 1 MHz to 3.9 GHz RF Downconverter Core Module Datasheet 2015 SignalCore, Inc. support@signalcore.com SC5306B S PECIFICATIONS Definition of Terms The following terms are used throughout this datasheet
Radar transponders. WORK Microwave GmbH Raiffeisenstrasse Holzkirchen Germany
Radar transponders WORK Microwave GmbH Raiffeisenstrasse 12 83607 Holzkirchen Germany Tel. Fax E-Mail +49 8024 6408 0 +49 8024 6408 40 sales@work-microwave.com Table of Contents 1 Introduction... 3 1.1
IQXT IQXT is a 2.0 x 1.6mm SMD Voltage Controlled Temperature Compensated Crystal Oscillator (VCTCXO) in a hermetically sealed package.
IQXT-205-2 IQXT-205-2 is a 2.0 x 1.6mm SMD Voltage Controlled Temperature Compensated Crystal Oscillator (VCTCXO) in a hermetically sealed package. Model Name IQXT-205-2-18 IQXT-205-2-25 IQXT-205-2-28
Rakon Product Proposal
RTX5032A -- SMD Temperature Compensated Crystal Oscillator -- -- High performance TCXO offering excellent Phase Noise, Frequency Stability and VCO tilt compensation. -- Product description -- The RTX5032A
HIGH-VALUE PHASE-LOCKED COAXIAL RESONATOR OSCILLATOR
OSCILLATOR SECTION HIGH-VALUE PHASE-LOCKED COAXIAL RESONATOR OSCILLATOR BCO SERIES: 0.20 4 GHz (Fundamental) 4 16 GHz (Multiplied) FEATURES Low cost Phase locked to external standard or internal crystal
Rakon Product Proposal
IT2200A -- SMD Temperature Compensated Crystal Oscillators -- -- Low cost SMD TCXO with voltage control option using an analogue IC for compensation. Frequencies ranging from 10MHz to 52MHz. -- Product
MORION, Inc. Quartz Frequency Control Products: quartz oscillators. Product Catalogue. September 2010
ОАО «МОРИОН» (С-Петербург) ISO9001:2000 Q 29.07.28 MORION, Inc. (St. Petersburg) СВС.01.431.0072.05 MORION, Inc. Quartz Frequency Control Products: quartz oscillators. Product Catalogue September 2010
Features. = +25 C, Vdc = +12V
Typical Applications The VCO Module is ideal for: Industrial/Medical Equipment Test & Measurement Equipment Military Radar, EW & ECM Lab Instrumentation Functional Diagram Electrical Specifications, T
Features. = +25 C, 50 Ohm System, Vcc= 5V
Typical Applications Prescaler for 1 MHz to 13 GHz PLL Applications: Point-to-Point / Multi-Point Radios VSAT Radios Fiber Optic Test Equipment Space & Military Functional Diagram Features Ultra Low ssb
Data Sheet SC5317 & SC5318A. 6 GHz to 26.5 GHz RF Downconverter SignalCore, Inc. All Rights Reserved
Data Sheet SC5317 & SC5318A 6 GHz to 26.5 GHz RF Downconverter www.signalcore.com 2018 SignalCore, Inc. All Rights Reserved Definition of Terms 1 Table of Contents 1. Definition of Terms... 2 2. Description...
Wave Form: Square x 20.2 x 5.88H [0.504 x x 0.231] G8 500 khz ~ 170 MHz 4 pin DIL half size
![Wave Form: Square x 20.2 x 5.88H [0.504 x x 0.231] G8 500 khz ~ 170 MHz 4 pin DIL half size](/thumbs/91/106537005.jpg "Wave Form: Square x 20.2 x 5.88H [0.504 x x 0.231] G8 500 khz ~ 170 MHz 4 pin DIL half size")
V C X O G series What is a VCXO? Logic: TTL / CMOS Wave Form: Square MERCURY Since 1973 Unlike regular clock oscillator which has fixed output frequency, the output frequency of a VCXO (also known as frequency
Features. = +25 C, Vcc = +5V
Typical Applications Low noise wideband MMIC VCO for applications such as: Industrial/Medical Equipment Test & Measurement Equipment Military Radar, EW & ECM Functional Diagram Features Wide Tuning Bandwidth
EXPERTS FOR CUSTOMIZED FREQUENCY CONTROL PRODUCTS. Flexible TCXO Line. Ultra Low Noise OCXO
CATALOG EXPERTS FOR CUSTOMIZED FREQUENCY CONTROL PRODUCTS Flexible OCXO Line Ultra Low Noise OCXO Low Power Fast Warm up OCXO Vibration Insensitive OCXO Oscillators for Space GHz Crystal Controlled Sources
12.92 GHz to GHz MMIC VCO with Half Frequency Output HMC1169
Data Sheet 12.92 GHz to 14.07 GHz MMIC VCO with Half Frequency Output FEATURES Dual output frequency range fout = 12.92 GHz to 14.07 GHz fout/2 = 6.46 GHz to 7.035 GHz Output power (POUT): 11.5 dbm SSB
PS-701 SAW Oscillator
PS-701 SAW Oscillator PS-701 The PS-701 SO (Saw Oscillator from Vectron is a high frequency, ultra low phase noise oscillator designed to support high speed data converters and 100G / 400G coherent optical
12.17 GHz to GHz MMIC VCO with Half Frequency Output HMC1167
9 0 3 4 5 6 9 7 6.7 GHz to 3.33 GHz MMIC VCO with Half Frequency Output FEATURES Dual output frequency range fout =.7 GHz to 3.330 GHz fout/ = 6.085 GHz to 6.665 GHz Output power (POUT): 0.5 dbm Single-sideband
Varactor-Tuned Oscillators. Technical Data. VTO-8000 Series
Varactor-Tuned Oscillators Technical Data VTO-8000 Series Features 600 MHz to 10.5 GHz Coverage Fast Tuning +7 to +13 dbm Output Power ± 1.5 db Output Flatness Hermetic Thin-film Construction Description
SC5407A/SC5408A 100 khz to 6 GHz RF Upconverter. Datasheet. Rev SignalCore, Inc.
SC5407A/SC5408A 100 khz to 6 GHz RF Upconverter Datasheet Rev 1.2 2017 SignalCore, Inc. support@signalcore.com P R O D U C T S P E C I F I C A T I O N S Definition of Terms The following terms are used
11.41 GHz to GHz MMIC VCO with Half Frequency Output HMC1166
9 6 3 30 29 VTUNE 28 27 26.4 GHz to 2.62 GHz MMIC VCO with Half Frequency Output FEATURES Dual output frequency range fout =.4 GHz to 2.62 GHz fout/2 = 5.705 GHz to 6.3 GHz Output power (POUT): dbm Single-sideband
VS-504 Dual Frequency VCSO High Frequency
VS-504 Dual Frequency VCSO High Frequency VS-504 The VS-504 dual frequency VCSO (Voltage Controlled Saw Oscillator from Vectron is a high frequency, ultra low phase noise oscillator designed to support
Features. = +25 C, Vcc = +3V
Typical Applications Low noise MMIC VCO w/buffer Amplifi er for: VSAT & Microwave Radio Test Equipment & Industrial Controls Military Features Pout: +dbm Phase Noise: -106 dbc/hz @100 khz No External Resonator
RS3400W/04 77 GHz Radar Sensor
Features Complete 76-77GHz band FMCW Radar Front End Synthesized frequency source Wideband Sweep Description The RS34W/4 is a W-band FMCW radar front end featuring synthesized frequency sweeps. A fast
Performance Specifications. Frequency Stabilities Supply Voltage (Vs) ma ma. RF Output
TX-309 Hi-Rel Temperature Compensated Crystal Oscillator TX-309 Features Radiation Tolerant Small footprint Frequency Range: 0.3 MHZ to 150 MHZ Previous Model: C2501 Applications Reference clock for space
Ultra Low Phase Noise XO / VCXO
FEATURES: High "Q", 3rd Overtone Crystal Technology Ultra Low Phase Noise -162 Typ. @ 10k, 100MHz carrier Standard LVCMOS RF Output Wide Operating Temperature (-40ºC to +85ºC) standard ±28 ppm Max. All
Ultra Low Phase Noise VCXO
FEATURES: High "Q", 3rd Overtone Crystal Technology Ultra Low Phase Noise -162 dbc/hz Typ. @ 10kHz offset, 100MHz carrier Standard LVCMOS RF Output Wide Operating Temperature (-40ºC to +85ºC) standard
OCXO AND CLOCK DISTRIBUTION SYSTEM. As used with VE2ZAZ Controller
OCXO AND CLOCK DISTRIBUTION SYSTEM As used with VE2ZAZ Controller Jacques Audet VE2AZX June 2011 Rev. Jan 2013 REAR BLOCK DIAGRAM MV89A OSCILLATOR MODULE FRONT 12 +12 dbm +15V ZFSC-8-1 +12 dbm +12 dbm
Features. = +25 C, Vcc = +3V
Typical Applications Low noise MMIC VCO w/buffer Amplifi er for: Wireless Local Loop (WLL) VSAT & Microwave Radio Test Equipment & Industrial Controls Military Features Pout: +4.9 dbm Phase Noise: -3 dbc/hz
Frequency Synthesizer
50Ω 3700 MHz (fixed) The Big Deal Low phase noise and spurious Fixed frequency without external programming Integrated microcontroller Robust design and construction Case size 2.75" x 1.96" x 0.62" CASE
TX-705 Temperature Compensated Crystal Oscillator
TX-705 Temperature Compensated Crystal Oscillator TX-705 Features Applications The TX-705 is a TCXO family designed for applications where superior g-sensitivity and good phase noise together with small
v Features = +25 C, 50 Ohm System, Vcc = 5V
Typical Applications Prescaler for DC to X band PLL applications: Satellite communication systems Fiber optic Point-to-point and point-to-multi-point radios VSAT Functional Diagram Features Ultra low SSB
RFPT Specifications. The CHARON is a SPI controlled high accuracy TCXO with embedded timer and alarm function. Product description
RFPT200 -- The CHARON is a SPI controlled high accuracy TCXO with embedded timer and alarm function. -- -- The Charon is a high stability 7x5 SMD Digitally Controlled Temperature Controlled Crystal Oscillator
QTCT220 SERIES 2.0 x 2.5mm MINIATURE SMD TEMPERATURE CONTROLLED CRYSTAL OSCILLATORS 2.8 to 3.3Vdc MHz to 52.
5PeNdTbfTaY Q-Tech s surface-mount QTCT220 oscillators consist of an IC 3.3Vdc TCXO built in a low profile ceramic package with gold plated contact pads. Features ECCN: EAR99 Frequency range from 10.000MHz
TEMPERATURE COMPENSATED/ VOLTAGE CONTROLLED CRYSTAL OSCILLATOR
TEMPERATURE COMPENSATED/ VOLTAGE CONTROLLED CRYSTAL OSCILLATOR ASTX-12, ASVTX-12 FEATURES: 2.5 X 2.0 X 0.9mm APPLICATIONS: Ultra miniature and low height 0.9mm. Low current consumption 2mA. Vc function
QuickSyn Frequency Synthesizers
QuickSyn Frequency Synthesizers FSL mmw Series This series offers models FSL-2740, FSL-5067, and FSL-7682, which extend QuickSyn Lite synthesizers into the millimeterwave range. The three available models
Performance Specifications. Frequency Stabilities 1 ( 10 & 20 MHz)
MD-223 I 2 C Interface Oven Controlled Crystal Oscillator Preleminary version MD-223 The MD-223 is a Vectron module that contains a medium size ovenized crystal oscillator and an I 2 C interface that communicates
Block Diagram. Figure 1. Functional Block Diagram
MD-171 High Stability GNSS (GPS and GLONASS) Disciplined Oscillator Module MD-171 The MD-171 is a Vectron GNSS disciplined module. It is a fully integrated GNSS disciplined oscillator module in a compact
SC5307A/SC5308A 100 khz to 6 GHz RF Downconverter. Datasheet SignalCore, Inc.
SC5307A/SC5308A 100 khz to 6 GHz RF Downconverter Datasheet 2017 SignalCore, Inc. support@signalcore.com P RODUCT S PECIFICATIONS Definition of Terms The following terms are used throughout this datasheet