Low-G 222 Series OCXO
|
|
|
- Gervase Harrison
- 5 years ago
- Views:
Transcription
1 Low-G 222 Series OCXO The 222 Series is a rugged Oven Controlled Crystal Oscillator ideal for demanding military applications such as UAVs, rotorcraft, and tracked vehicles as well as harsh industrial environments. The primary focus of the 222 Series are those applications requiring significantly reduced acceleration sensitivity beyond the levels obtainable through conventional solutions. Operating as a stand alone product or in tandem with mechanical shock and vibration systems, the 222 Series is capable of reducing the effects of acceleration on phase noise to levels near or below the noise floor. Features Low g-sensitivity < 2.0E-10/g/axis Internal 24-bit D/A converter for non-volatile calibration via I 2 C Factory optimized for your vibration profile Hermetic packaging Thermal stability to ±1.0E-08 over 100 C Wide temperature range available (-55 C to +95 C) Small package size (1.0"x1.0"x.565") Low static phase noise Optional internal ROM data storage Optional screening per MIL-PRF Optional shock & vib systems Phase Noise under Random Vibration
2 Low-G 222 Series OCXO Vibration effects can be a significant problem in high frequency communication, navigation and RADAR systems often causing large phase excursions and degradation in phase noise performance and short-term stability. The 222 Series is designed to operate in high acceleration and vibration environments (up to 20 Grms, 20Hz - 2KHz) where its exceptional g-sensitivity and excellent overall stability make it the ideal choice for clean-up loops following GPS clocks, Cesium or Rubidium frequency standards and optical communications links. The 222 Series features a high resolution digital tuning interface via 24-bit DAC for precise control in critical applications. Optionally, a traditional analog tuning voltage input is also available. MTI can customize the 222 Series Oscillator for your specific application and vibration profile. Applications UAVs Manned Aircraft Rotocraft Tracked Vehicles Shipboard Mobile Equipment Industrial Installations RADAR Tactical Radio Secure Communications Precision Navigation 222 Series Interface Control Drawing
3 MTI-Milliren Technologies Inc. Two New Pasture Road Newburyport, MA Tel: Fax: Web: QUARTZ CRYSTAL OSCILLATOR SPECIFICATION ICD # : Page : 1 of 3 Electrical Parameter Specification Note # Comments Frequency : E+07 Hz 3 Initial Tolerance : ± 0.0E+00 Crystal Cut : SC Overtone : 3 Thermal Stability : 2.0E-08 Temperature Range Minimum : -30 C Maximum : 75 C Aging Per Day : 1.0E-09 Per Month : 0.0E+00 1 Per Year : 1.0E-07 Output Type SINE 2 Nominal : dbm Minimum : dbm Maximum : dbm Harmonics : -20 dbc Subharmonics : 0 dbc 1 Spurious : -80 dbc Phase Noise at Offsets of 1 Hz : -90 dbc/hz 5 10 Hz : -120 dbc/hz 100 Hz : -140 dbc/hz 1000 Hz : -150 dbc/hz Hz : -157 dbc/hz Hz : -160 dbc/hz Short Term Stability 1 sec : 1.0E sec : 0.0E+00 1
4 MTI-Milliren Technologies, Inc., Oscillator Specification ICD # : 0 Page : 2 of 3 Electrical Parameter Specification Note # Comments Supply Voltage Sensitivity (±5%) df/dv : 5.0E-09 Load Sensitivity (±5%) df/dl : 5.0E-09 g-sensitivity df/dg : 2.0E-11 4 Warm-up 6 Time : 3.0 Min df/f : 5.0E-08 Reference Time : 30.0 Min Retrace df/f : 5.0E-09 Time Off : 24.0 Hrs Time On : 2.0 Hrs Warm-up Typical : W Minimum : W Maximum : W Continuous Power Typical : W 6 Minimum : W Maximum : W Supply Voltage Nominal : 6.50 V Minimum : 6.18 V Maximum : 6.82 V Reference Voltage Minimum : 4.7 V Maximum : 5.3 V Source Resistance : 1.000E+02 Ω Tuning Voltage Minimum : 0.0 V Maximum : 5.0 V Tuning Slope : Positive Tuning Input Resistance : 5.000E+04 Ω Bandwidth : 5.000E+02 Hz Tuning Linearity : 20 % Electrical Tuning Minimum : ± 8.0E-07 Maximum : ± 2.4E-06 Mechanical Tuning Minimum : ± 0.0E+00 1 Maximum : ± 0.0E+00 1
5 MTI-Milliren Technologies, Inc., Oscillator Specification ICD # : 0 Page : 3 of 3 Notes 1. Not applicable 2. Into a 50 Ω load 3. Initial Tolerance Not Applicable 4. Sensitivity per axis. Operational vibration level: 10 Hz 0.05g^2/Hz 100 Hz 0.05g^2/Hz 100Hz to 1kHz -20dB/decade Shock 30g, 11ns half sine 5. Static Noise Measurement 6. Still Air at 25 C
Low Noise Oscillator series LNO 4800 B MHz
Specific request can be addressed to RAKON hirel@rakon.com Product Description LNO 4800 B3 is a low noise oscillator generating an output signal at 4800 MHz. It is composed by an OCSO (Oven Controlled
OX-046 VHF low g-sensitivity Oven Controlled Crystal Oscillator
OX-046 VHF low g-sensitivity Oven Controlled Crystal Oscillator OX-046 Features Ultra Low G-Sensitivity Low Phase Noise Very High Frequency Frequency Range: 50 MHZ to 250 MHZ Standard Frequency: 100 MHz
OX-304 at 10 MHz Ultra Low Phase Noise Oven Controlled Crystal Oscillator
OX-304 at 10 MHz Ultra Low Phase Noise Oven Controlled Crystal Oscillator OX-304 The OX-304 is an Ultra Low Phase Noise Ovenized Crystal Oscillator with a noise floor as low as -173 dbc/hz in a compact
OX-204 at 10 MHz Ultra Low Phase Noise Oven Controlled Crystal Oscillator
OX-204 at 10 MHz Ultra Low Phase Noise Oven Controlled Crystal Oscillator OX-204 OX-204 The OX-204 is an Ultra Low Phase Noise Ovenized Crystal Oscillator with a noise floor as low as -175 dbc/hz. Designed
OX-043 Low g-sensitivity Oven Controlled Crystal Oscillator
OX-043 Low g-sensitivity Oven Controlled Crystal Oscillator OX-043 Features Applications Ultra Low g-sensitivity Low Phase Noise High Stability Frequency Range: 8 MHZ to 15 MHZ Standard Frequency 10 MHz
OX-175 Ultra Low Noise Oven Controlled Crystal Oscillator
OX-175 Ultra Low Noise Oven Controlled Crystal Oscillator OX-175 The OX-175 is a low phase noise, high-frequency ovenized crystal oscillator in a 28 x 38 mm package. The oscillator has a noise floor of
OX-175 Ultra Low Noise Oven Controlled Crystal Oscillator
OX-175 Ultra Low Noise Oven Controlled Crystal Oscillator OX-175 The OX-175 is a low phase noise, high-frequency ovenized crystal oscillator in a 28 x 38 mm package. The oscillator has a noise floor of
Typical Applications Satellite and Deep Space Radiation Tolerance Required Severe Environmental Conditions. 10 MHz 40 MHz 10, 20 MHz
EX-209 Hi-Reliability Evacuated Miniature Crystal Oscillator EX-209 Features 16 pin Double Dip Package Ruggedized hybrid thick film construction Low Power Consumption Legacy Model: EX-245 Typical Applications
Stability as AXIOM9000 plus low noise high isolation frequency distribution amplifier with 4 to 16 outputs
in Specification AXIOM9000 Rev.: 1 Date: 2016-07-01 Oscillator type: Very High Stability Ultra-Low Noise Reference (D)OCXO in 19 rack (1 HU) with up to 3 outputs Features: Very High Frequency Stability
MD-173 High Stability Coefficient Oscillator I C interface Oven Controlled Crystal Oscillator
MD-173 High Stability Coefficient Oscillator I C interface Oven Controlled Crystal Oscillator 2 MD-173 The MD-173 is a Microsemi Coefficient Oscillator (CCXO) that contains a high-stability ovenized crystal
OX-171 Oven Controlled Crystal Oscillator
OX-171 Oven Controlled Crystal Oscillator OX-171 The OX-171 is a high stability ovenized crystal oscillator in a 28 x 38 mm package, capable of aging rates of 0.06 /day and temperature stabilities of 1
A HIGH PRECISION QUARTZ OSCILLATOR WITH PERFORMANCE COMPARABLE TO RUBIDIUM OSCILLATORS IN MANY RESPECTS
A HIGH PRECISION QUARTZ OSCILLATOR WITH PERFORMANCE COMPARABLE TO RUBIDIUM OSCILLATORS IN MANY RESPECTS Manish Vaish MTI-Milliren Technologies, Inc. Two New Pasture Road Newburyport, MA 195 Abstract An
Low Noise Oscillator series LNO 100 OCXO LNO 100
Specific request can be addressed to RAKON info@rakon.fr Product Description This Low Noise Oven Controlled Crystal Oscillator available in different footprints from 38x38x22 mm (1.5 x1.5 x0.8 ) till 25x22x12
Performance Specifications
OX-208 Oven Controlled Crystal Oscillator OX-208 OX-208 The OX-208 is a high stability ovenized crystal oscillator in a 25 x 25 mm package, capable of aging rates of 0.15 /day and temperature stabilities
MX-041 Oven Controlled Crystal Oscillator
MX-041 Oven Controlled Crystal Oscillator MX-041 Features Applications SC-Cut resonator Frequency Range: 5 MHZ to 20 MHZ Low Package Height Temperature stability to 0.4 Aging rate 0.1 /day Frequency range
VX-990 Voltage Controlled Crystal Oscillator Ultra Low Noise and G-Sensitivity
VX-990 Voltage Controlled Crystal Oscillator Ultra Low Noise and G-Sensitivity VX-990 Ultra low Phase Noise Ultra low G-Sensitivity Vibration hardened Tight Tolerances Frequency Range Standard Frequency
PX-990 Crystal Oscillator Ultra Low Noise and G-Sensitivity
PX-990 Crystal Oscillator Ultra Low Noise and G-Sensitivity PX-990 Ultra low Phase Noise Ultra low G-Sensitivity Vibration hardened Tight Tolerances Frequency Range Standard Frequency Features 60-120MHz
Low Noise Oscillator series LNO 100 OCXO LNO 100
Specific request can be addressed to RAKON info@rakon.fr Product Description This Low Noise Oven Controlled Crystal Oscillator available in different formats from 51x51x25 mm (2 x2 x1 ) till 25x25x12 mm
OCXO 8600 BVA Oven Controlled Crystal Oscillator
BVA Oven Controlled Crystal Oscillator The 8600-B series is based on the technique of housing a state-of-the-art BVA crystal resonator and its associated oscillator components in double oven technology.
Rubidium Frequency Standard Model AR133A Ruggedized Low Profile
Ruggedized Low Profile Key Features Long-term-stability: 5E-11/month 2E-12 frequency accuracy & 100nSec 1PPS accuracy relative to 1PPS input when disciplined Short term stability: 5E-12 @ 100s Phase noise:
RK 409. Parameters Conditions/remarks Min Nom Max Unit
For this product, full and detailed specifications can be delivered on request. Specific request can be addressed to RAKON hirel@rakon.com Product Description This stable oscillator is designed for Space
O-CDFEXYZXX-X-X-10MHz/100MHz Precision Ultra Low Phase Noise Dual Frequency OCXO Reference Module (DFRM)
O-CDFEXYZXX-X-X-10MHz/100MHz Precision Ultra Low Phase Noise Dual Frequency OCXO Reference Module (DFRM) Rev C The DFRM consists of 2 Ultra Low Phase Noise OCXO at 10 MHz and 100 MHz. The module is packaged
Rubidium Frequency Standard Model AR133A Ruggedized Low Profile
Rubidium Frequency Ruggedized Low Profile Key Features Long-term-stability: 5E-11/month Short term stability: 2E-12 @ 1000s (Typ.) Phase noise: -158 dbc/hz @10kHz Spurious: < -110 dbc Time Accuracy (1PPS):
Specification AXIOM210 Rev.: 3 Date: Oscillator type: Ultra-Low Phase Noise OCXO in Vibration-isolated Package
in Specification AXIOM210 Rev.: 3 Date: 2015-02-17 Oscillator type: Ultra-Low Phase Noise OCXO in Vibration-isolated Package Parameter min. typ. max. Unit Condition Frequency range 50 130 MHz Standard
OD100LP-Series Low Phase Noise
OD100LP-Series Low Phase Noise VCOCXO1 Description: The Connor-Winfield OD100LP-series is a low phase noise VCOCXO in a 1x1 inch metal package. The OD100LP-series is designed for those applications that
A MINIATURE PRECISION OVEN QUARTZ OSCILLATOR SETS NEW SIZE VS. PERFORMANCE STANDARD
A MINIATURE PRECISION OVEN QUARTZ OSCILLATOR SETS NEW SIZE VS. PERFORMANCE STANDARD Bryan T. Milliren MTI-Milliren Technologies, Inc. Two New Pasture Road, Newburyport, MA 195 ABSTRACT The next generation
Flight Model (FM) Lot Acceptance Test Model (LAT) Quartz Crystal. Synthetic HiQ Quartz, SC-cut, HC-35/U 4-point
in Specification AXIOM75SH Rev.: 1 Date: 2018-02-16 Oscillator type: Low Phase Noise OCXO for Space Application (COTS version) Features: Lower cost Commercial Off-The-Shelf version (COTS) Qualified according
VS-701 High Shock Discrete Voltage Controlled SAW Oscillator
VS-701 High Shock Discrete Voltage Controlled SAW Oscillator VS-701 The VS-701 VCSO (Voltage Controlled Saw Oscillator from Vectron is a high frequency, ultra low phase noise oscillator designed to support
Performance Specifications. Frequency Stabilities Supply Voltage (Vs) ma ma. RF Output
TX-309 Hi-Rel Temperature Compensated Crystal Oscillator TX-309 Features Radiation Tolerant Small footprint Frequency Range: 0.3 MHZ to 150 MHZ Previous Model: C2501 Applications Reference clock for space
TE 300 TCXO Series 300
For this product, a full detailed specification can also be delivered on request. Specific request can be addressed to RAKON info@rakon.fr Product Description This High performance ITAR-Free Flat Pack
OX-200 Oven Controlled Crystal Oscillator
OX-200 Oven Controlled Crystal Oscillator OX-200 Features Reflow Process Compatible AT-Cut and SC-Cut Crystal Options Low Profile Compact Package Applications Base Stations Test Equipment Synthesizers
OX-249 Space Qualified Oven Controlled Crystal Oscillator (OCXO)
Common Characteristics [all frequencies and options] Supply voltage 4.75 5.0 5.25 VDC Power consumption (in air) Frequency vs. Temperature (ref. frequency at 60 minutes) Warm-up Accuracy @+25 C, (ref.
Package Type: 0 Through Hole Supply Voltage: V V V Logic: HCMOS Sine Wave
Description Q-Tech s High Stability OCXO is a high reliability signal generator that provides an HCMOS or Sine Wave output. The OCXO is available in a Through hole package. A flexible design allows Q-Tech
AN ENVIRONMENTALLY HARDENED PRECISION QUARTZ
AN ENVIRONMENTALLY HARDENED PRECISION QUARTZ OSCILLATOR S.M. Bass, B.T. Milliren, and R.M. Garvey Frequency and Time Systems, Incorporated Beverly, Massachusetts 01 915 ABSTRACT Frequency and Time Systems
O C X O Oven Controlled Crystal Oscillators
What is an OCXO? Relatively speaking, an OCXO performs in the ±0.01~±0.1 ppm range, a TCXO performs in the ±1~±3 ppm range while a non-compensated clock oscillator performs in the ±25, ±50 ppm range. A
HELLAS INDUSTRIES. for custom designs since 1980 in. Custom RF Filter & Frequency Control Solutions. Defence Avionics Medical Telecom
HELLAS Custom RF Filter & Control Solutions The Choice for custom designs since 1980 in Monolithic Crystal Filters Discrete Crystal Filters LC Filters Switch Filter assemblies Oscillators INDUSTRIES Defence
O-CS22-HH-0XYZXX-X-X-X-X Series Precision Ultra Low Phase Noise OCXO in Low Profile 22x25x10 mm SMD package
O-CS22-HH-0XYZXX-X-X-X-X Series Precision Ultra Low Phase Noise OCXO in Low Profile 22x25x10 mm SMD package Product Data Sheet Rev E Features SC-cut crystal High Stability Low Profile (10 mm) SMD package
PS-701 SAW Oscillator
PS-701 SAW Oscillator PS-701 The PS-701 SO (Saw Oscillator from Vectron is a high frequency, ultra low phase noise oscillator designed to support high speed data converters and 100G / 400G coherent optical
Advancements in Quartz Based Oscillator Technologies Advanced Timing for High Speed Connectivity
Advancements in Quartz Based Oscillator Technologies Advanced Timing for High Speed Connectivity 2015 2017 Rakon Limited 0 CONFIDENTIAL INFORMATION Topics Background Resonator Improvements Profile, Power
OTHER FEI PRODUCTS. FE-102A - CRYSTAL OSCILLATOR MHz WITH LOW PHASE NOISE: -172 dbc
OTHER FEI PRODUCTS FE-102A - CRYSTAL OSCILLATOR OPERATION @100 MHz WITH LOW PHASE NOISE: -172 dbc FE-101A - CRYSTAL OSCILLATOR SUBMINIATURE OVEN CONTROLLED DESIGN, ONLY 1.27"X1.33"X1.33" WITH FAST WARM
TX-705 Temperature Compensated Crystal Oscillator
TX-705 Temperature Compensated Crystal Oscillator TX-705 Features Applications The TX-705 is a TCXO family designed for applications where superior g-sensitivity and good phase noise together with small
g - Compensated, Miniature, High Performance Quartz Crystal Oscillators Frequency Electronics Inc. Hugo Fruehauf
g - Compensated, Miniature, High Performance Quartz Crystal Oscillators Frequency Electronics Inc. Hugo Fruehauf hxf@fei-zyfer.com April 2007 Discussion Outline Introduction Radar Applications GPS Navigation
GPS-Disciplined-Rubidium Clock AR70A-00
GPS-Disciplined-Rubidium Clock Miniature GPS-Rubidium Main Features Rubidium clock disciplined to GPS Outputs: 10MHz, 1PPS Inputs: External 1PPS, GPS antenna Time Accuracy: 100ns relative to GPS Frequency
Oven Controlled Crystal Oscillator OCXO SERIES 8100
FEATURES IEEE 1588 compatible Frequencies up to 100 MHz ELECTRICAL SPECIFICATIONS Frequency Range* fo 5.000 100.000 MHz Supply Voltage Vs Vs ±5% Power Consumption Warm-up Time Frequency Calibration Frequency
O-CXM-XXYZXX-X-X-XX-X Precision Ultra Low Phase Noise OCXO in 36x27 mm Europack with optional Adapter to 2 x2
Product Data Sheet Rev K O-CXM-XXYZXX-X-X-XX-X Precision Ultra Low Phase Noise OCXO in 36x27 mm Europack with optional Adapter to 2 x2 Description O-CX Series is based on Ultra Low Noise 10 MHz reference
DS H01 DIGITAL SYNTHESIZER MODULE SYSTEM SOLUTIONS. Features Applications 174 x 131 x 54 mm. Technical Description
DS H01 The DS H01 is a high performance dual digital synthesizer with wide output bandwidth specially designed for Defense applications where generation of wideband ultra-low noise signals along with very
PRELIMINARY. Logic: C = CMOS S = Sine Wave
Description Q-Tech s microcomputer compensated crystal oscillator, MCXO, uses a high stability overtone SC-cut crystal with microprocessor controlled compensation. The self-temperature sensing resonator,
INSTRUMENTS, INC. Model 2960AX Disciplined Quartz Frequency Standard 2960AX. Section Page Contents
INSTRUMENTS, INC. Model 2960AX Disciplined Quartz Frequency Standard 2960AX Section Page Contents 1.0............................. 2......................... Description 2.0.............................
Performance Specifications
OX-280 Oven Controlled Crystal Oscillator OX-280 Features Surface Mount Package AT-CUT and SC_CUT Crystal Options Low Profile Compact Package Compact Package Applications Base stations Test equipment Synthesizers
Lead Finish: T = Standard S = Solder Dip (**) Package Type: 0 = DIP-14 1 = SMD 2 = Gull Wing Supply Voltage: 3 = +3.3V 5 = +5.0V
Description The Q-Tech Analog TCXO encompasses state-of-the-art oscillators with low phase noise, jitter, and tight temperature stability. The TCXO is available in a DIP (QT3003), SMD (QT3013) or Gull
Rakon Product Proposal
RTX5032A -- SMD Temperature Compensated Crystal Oscillator -- -- High performance TCXO offering excellent Phase Noise, Frequency Stability and VCO tilt compensation. -- Product description -- The RTX5032A
TX-707 Low g-sensitivity Temperature Compensated Crystal Oscillator
TX-707 Low g-sensitivity Temperature Compensated Crystal Oscillator TX-707 The TX-707 Series TCXO combines innovative manufacturing and the latest technology to provide low phase noise and excellent g-sensitivity.
Phase Locked Sources Series PDRO Dielectric Resonator Oscillators
Features Options Wide Operating Temperature Range -40 to +75 C Standard Ultra Low Phase-Noise Small Size Field Adjustable Tuning No Subharmonics Ideal for Outdoor Applications Low Cost, Low Profile, Low
CXOLAT CXOLAT 1.8V CXOLAT 2.5V CXOLAT 3.0V CXOLAT 3.3V
CXOLAT he CXOLAT 32.768kHz surface-mount oscillator achieves the low power comparable with a tuning fork design and the fast start-up and tight frequency stability attained by an AT cut crystal design.
OX-221 Oven Controlled Crystal Oscillator
OX-221 Oven Controlled Crystal Oscillator OX-221 Features Surface Mount package SC_CUT Crystal Low Profile Compact Package standard frequency: 1, 2, 3.72 MHz Applications Base stations Test equipment Synthesizers
VS-507 Voltage Controlled SAW Oscillator
VS-507 Voltage Controlled SAW Oscillator VS-507 Description The VS-507 VCSO (Voltage Controlled Saw Oscillator from Vectron is an ultra high frequency, ultra low phase noise oscillator. The VS-507 provides
STRATUM 3E High Stability Oven Stabilized Oscillator OH300 Series OCXO / VCOCXO
Available at Digi-Key** www.digikey.com STRATUM 3E High Stability Oven Stabilized Oscillator OH300 Series OCXO / VCOCXO US Headquarters: 630-851-4722 European Headquarters: +353-61-472221 Description Connor-Winfield
Ultra-Low Phase Noise OCXO
APPLICATIONS: COTS Military & Industrial Radios & Timing Circuits Cellular Infrastructure Radar Systems Test & Measurement Equipment GPS Tracking with precision hold-over accuracy WiMax / WLAN Precision
Model 149 Stratum 3E, 9x14 mm OCXO
Features 10 to 50 MHz Frequency Range Compliant to Stratum 3E of GR1244CORE Surface Mount 3.3V or 5.0V operation Low Jitter/Phase Noise Tape and Reel Packaging Applications Telecom Switching Wireless Communication
SPACE PASSIVE COMPONENT DAYS 2 nd SPCD Edition
SPACE PASSIVE COMPONENT DAYS 2 nd SPCD Edition 10150 JEFFERSON BLVD, CULVER CITY, CA 90232 USA 2 nd 0 2 nd INTERNATIONAL SYMPOSIUM SPACE PASSIVE COMPONENT DAYS ULTRA 3 ULTRA MINIATURE, ULTRA RUGGED, ULTRA
MORION, Inc. Quartz Frequency Control Products: quartz oscillators. Product Catalogue. September 2010
ОАО «МОРИОН» (С-Петербург) ISO9001:2000 Q 29.07.28 MORION, Inc. (St. Petersburg) СВС.01.431.0072.05 MORION, Inc. Quartz Frequency Control Products: quartz oscillators. Product Catalogue September 2010
VS-504 Dual Frequency VCSO High Frequency
VS-504 Dual Frequency VCSO High Frequency VS-504 The VS-504 dual frequency VCSO (Voltage Controlled Saw Oscillator from Vectron is a high frequency, ultra low phase noise oscillator designed to support
OX-400 / OX 401 Oven Controlled Crystal Oscillator
OX-400 / OX 401 Oven Controlled Crystal Oscillator OX-400 / 401 Features 4-Pin Dip Fast warm-up TCXO replacement for better short term stability Frequency Range, 10 MHz to 40 MHz Standard frequencies,
Model 845-M Low Noise Synthesizer
Model 845-M Low Noise Synthesizer Features Low phase noise Fast switching down to 20 µs FM, Chirps, Pulse Internal OCXO, external variable reference Single DC supply Applications ATE LO for frequency converters
CXOQ CXOQ 1.8V CXOQ 2.5V CXOQ 3.0V CXOQ 3.3V
CXOQ Statek s ultra miniature and ultra low profile CXOQ oscillators consist of a CMOS/TTL compatible hybrid circuit and a state-ofthe-art, miniature, fundamental-mode crystal. Model Name Description CXOQ
ABSTRACT. This paper describes the performance characteristics of a new, rugged 5 MHz quartz crystal oscillator
A NEW RUGGED LOW NOISE HIGH PRECISION OSCILLATOR D. A. Emmons Frequency and Time Systems, Inc. Danvers, P.lassachusetts ABSTRACT This paper describes the performance characteristics of a new, rugged 5
Rakon Product Proposal
IT2200A -- SMD Temperature Compensated Crystal Oscillators -- -- Low cost SMD TCXO with voltage control option using an analogue IC for compensation. Frequencies ranging from 10MHz to 52MHz. -- Product
APP NOTE. Acceleration Sensitivity Characteristics of Quartz Crystal Oscillators
APP NOTE Acceleration Sensitivity Characteristics of Quartz Crystal Oscillators The resonant frequency of every quartz crystal is affected by acceleration forces. The nature of the effect depends on the
Performance Specifications. Frequency Stabilities 1 ( 10 & 20 MHz)
MD-223 I 2 C Interface Oven Controlled Crystal Oscillator Preleminary version MD-223 The MD-223 is a Vectron module that contains a medium size ovenized crystal oscillator and an I 2 C interface that communicates
OCXO AND CLOCK DISTRIBUTION SYSTEM. As used with VE2ZAZ Controller
OCXO AND CLOCK DISTRIBUTION SYSTEM As used with VE2ZAZ Controller Jacques Audet VE2AZX June 2011 Rev. Jan 2013 REAR BLOCK DIAGRAM MV89A OSCILLATOR MODULE FRONT 12 +12 dbm +15V ZFSC-8-1 +12 dbm +12 dbm
EX-421 Evacuated Miniature Crystal Oscillator
EX-421 Evacuated Miniature Crystal Oscillator EX-421 Description The EX-421 provides exceptionally low aging rates and tight temperature stabilities in an extremely small package over a wide range of environmental
Agile Low-Noise Frequency Synthesizer A. Ridenour R. Aurand Spectrum Microwave
Agile Low-Noise Frequency Synthesizer A. Ridenour R. Aurand Spectrum Microwave Abstract Simultaneously achieving low phase noise, fast switching speed and acceptable levels of spurious outputs in microwave
RF Signal Generators. SG380 Series DC to 2 GHz, 4 GHz and 6 GHz analog signal generators. SG380 Series RF Signal Generators
RF Signal Generators SG380 Series DC to 2 GHz, 4 GHz and 6 GHz analog signal generators SG380 Series RF Signal Generators DC to 2 GHz, 4 GHz or 6 GHz 1 µhz resolution AM, FM, ΦM, PM and sweeps OCXO timebase
CMOS Sine. 3.3, 5.0, 12.0 or 15.0Vdc. 3.3, 5.0, 12.0 or 15.0Vdc. CMOS Sine. CMOS Sine. 3.3, 5.0, 12.0 or 15.0Vdc. LVDS (1 to 4 pairs) 3.
Q-TECH Q-Tech is the leading supplier of crystal controlled oscillators for space applications. Q-Tech has 40 years space heritage, is AS9100 certified, is the leading QPL supplier to MIL-PRF-55310 class
NI PXIe-5601 Specifications
NI PXIe-5601 Specifications RF Downconverter This document lists specifications for the NI PXIe-5601 RF downconverter (NI 5601). Use the NI 5601 with the NI PXIe-5622 IF digitizer and the NI PXI-5652 RF
FS5000 COMSTRON. The Leader In High Speed Frequency Synthesizers. An Ideal Source for: Agile Radar and Radar Simulators.
FS5000 F R E Q U E N C Y S Y N T H E S I Z E R S Ultra-fast Switching < 200 nsec Wide & Narrow Band Exceptionally Clean An Ideal Source for: Agile Radar and Radar Simulators Radar Upgrades Fast Antenna
Series T7250-T7258, T9250-T9258, T7001-T7013, T9301-T9313 Extended Temperature/COTS XO, 3.3V
Features 20kHz to 100MHz frequency range 5X7 SMD form factor Hermetically sealed for rugged environmental conditions Extremely wide operating temperature range accommodates harsh environments Crystals
EXPERTS FOR CUSTOMIZED FREQUENCY CONTROL PRODUCTS. Flexible TCXO Line. Ultra Low Noise OCXO
CATALOG EXPERTS FOR CUSTOMIZED FREQUENCY CONTROL PRODUCTS Flexible OCXO Line Ultra Low Noise OCXO Low Power Fast Warm up OCXO Vibration Insensitive OCXO Oscillators for Space GHz Crystal Controlled Sources
2400C Series Microwave Signal Generators 10 MHz to 40 GHz. Preliminary Technical Datasheet. Low Phase Noise and Fast-Switching Speed in a Single Unit
Preliminary Technical Datasheet 2400C Series Microwave Signal Generators 10 MHz to 40 GHz Low Phase Noise and Fast-Switching Speed in a Single Unit 2400C Series Microwave Signal Generator Signal Generator
A DROP-IN REPLACEMENT SOLUTION FOR YOUR EMI / EMC COMPLIANCE PROBLEM
3HM57 Group R A DROP-IN REPLACEMENT SOLUTION FOR YOUR EMI / EMC COMPLIANCE PROBLEM The principle sources of the EMI problem come from the system clocks. Therefore, rather than patch the problem with ferrite
MD-403 I2C InterfaceOven Controlled Crystal Oscillator
MD-43 I2C InterfaceOven Controlled Crystal Oscillator MD-43 The MD-43 is a Vectron module that contains a medium size ovenized crystal oscillator and an I 2 C interface that communicates with an onboard
CUSTOM INTEGRATED ASSEMBLIES
17 CUSTOM INTEGRATED ASSEMBLIES CUSTOM INTEGRATED ASSEMBLIES Cougar offers full first-level integration capabilities, providing not just performance components but also full subsystem solutions to help
PX-570 High Temperature Crystal Oscillator
PX-570 High Temperature Crystal Oscillator PX-570 Vectron offers a High Temperature Crystal Oscillator (PX-570) product platform for extreme environment applications. In addition to its wide operating
Block Upconverters for Integration in High Power Amplifiers
R Back to Block/Fixed Tuned Converters Block Upconverters for Integration in High Power Amplifiers Block Upconverters For Integration In High Power Amplifiers C-, X- and Ku-Band Models (except UPBA-13)
SC5306B 1 MHz to 3.9 GHz RF Downconverter Core Module. Datasheet SignalCore, Inc.
SC5306B 1 MHz to 3.9 GHz RF Downconverter Core Module Datasheet 2015 SignalCore, Inc. support@signalcore.com SC5306B S PECIFICATIONS Definition of Terms The following terms are used throughout this datasheet
AWG-GS bit 2.5GS/s Arbitrary Waveform Generator
KEY FEATURES 2.5 GS/s Real Time Sample Rate 14-bit resolution 2 Channels Long Memory: 64 MS/Channel Direct DAC Out - DC Coupled: 1.6 Vpp Differential / 0.8 Vpp > 1GHz Bandwidth RF Amp Out AC coupled -10
G - COMPENSATED, MINIATURE, HIGH-PERFORMANCE QUARTZ CRYSTAL OSCILLATORS
G - COMPENSATED, MINIATURE, HIGH-PERFORMANCE QUARTZ CRYSTAL OSCILLATORS Hugo Fruehauf Frequency Electronics, Inc. 1515 South Manchester Ave. Anaheim, CA 92802, USA 714-724-7069 hxf@fei-zyfer.com Abstract
125 Series FTS375 Disciplined Reference and Synchronous Clock Generator
Available at Digi-Key www.digikey.com 125 Series FTS375 Disciplined Reference and Synchronous Clock Generator 2111 Comprehensive Drive Aurora, Illinois 60505 Phone: 630-851- 4722 Fax: 630-851- 5040 www.conwin.com
Model 865-M Wideband Synthesizer
Model 865-M Wideband Synthesizer Features Wideband Low phase noise Fast switching down to 20 µs FM, Chirps, Pulse Internal OCXO, external variable reference Single DC supply Applications ATE LO for frequency
HIGH-VALUE PHASE-LOCKED COAXIAL RESONATOR OSCILLATOR
OSCILLATOR SECTION HIGH-VALUE PHASE-LOCKED COAXIAL RESONATOR OSCILLATOR BCO SERIES: 0.20 4 GHz (Fundamental) 4 16 GHz (Multiplied) FEATURES Low cost Phase locked to external standard or internal crystal
Performance Specifications. Frequency Stabilities 1 ( MHz) -20 to +70 C -40 to +85 C -40 to +95 C Residual error compare to fit curve
MD-403 I2C InterfaceOven Controlled Crystal Oscillator MD-403 The MD-403 is a Vectron module that contains a medium size ovenized crystal oscillator and an I 2 C interface that communicates with an onboard
SDI SPECTRADYNAMICS, INC. LOW NOISE FREQUENCY REFERENCE OPERATING MANUAL
SPECTRADYNAMICS, INC. LOW NOISE FREQUENCY REFERENCE LNFR-100E OPERATING MANUAL SPECTRADYNAMICS, INC 1849 Cherry St. Unit 2. Louisville, CO 80027 Phone: (303) 665-1852 Fax: (303) 604-6088 www.spectradynamics.com
LNS ultra low phase noise Synthesizer 8 MHz to 18 GHz
LNS ultra low phase noise Synthesizer 8 MHz to 18 GHz Datasheet The LNS is an easy to use 18 GHz synthesizer that exhibits outstanding phase noise and jitter performance in a 3U rack mountable chassis.
2.0 FREQUENCY CHARACTERISTICS Line Parameter Test Condition Value Unit 2.1 Nominal frequency range
CFPT9000 -- SMD Temperature Compensated Crystal Oscillator (PLUTO) -- -- A series of surface mountable 7.0x5.0mm Temperature Compensated Voltage Controlled Crystal Oscillators (TCVCXOs) for medium to high
The Effects of Crystal Oscillator Phase Noise on Radar Systems
Thomas L. Breault Product Applications Manager FEI-Zyfer, Inc. tlb@fei-zyfer.com The Effects of Crystal Oscillator Phase Noise on Radar Systems Why Radar Systems need high performance, low phase noise
Wave Form: Square x 20.2 x 5.88H [0.504 x x 0.231] G8 500 khz ~ 170 MHz 4 pin DIL half size
![Wave Form: Square x 20.2 x 5.88H [0.504 x x 0.231] G8 500 khz ~ 170 MHz 4 pin DIL half size](/thumbs/91/106537005.jpg "Wave Form: Square x 20.2 x 5.88H [0.504 x x 0.231] G8 500 khz ~ 170 MHz 4 pin DIL half size")
V C X O G series What is a VCXO? Logic: TTL / CMOS Wave Form: Square MERCURY Since 1973 Unlike regular clock oscillator which has fixed output frequency, the output frequency of a VCXO (also known as frequency
Trusted in High-Reliability Timing and Frequency Control
Frequency and Timing Space Products Trusted in High-Reliability Timing and Frequency Control Strong Space Heritage Superior Reliability and Precision Frequency and Timing Solutions Trusted in High Reliability
VFH230C Series XO Low Jitter 3.3V 5x7mm SMD, LVPECL / LVDS
5x7mm SMD, LV / Features 750kHz to 800MHz frequency range
Model 865 RF / Ultra Low Noise Microwave Signal Generator
Model 865 RF / Ultra Low Noise Microwave Signal Generator Features Excellent signal purity: ultra-low phase noise and low spurious Combination of highest output power and fastest switching Powerful touch-display
Product Guide. VIDA Oscillator Series. High Performance YIG Oscillator Westwind Blvd., Santa Rosa, CA Phone , FAX
Product Guide VIDA Oscillator Series High Performance YIG Oscillator 3579 Westwind Blvd., Santa Rosa, CA 95403 Phone 707-541-7000, FAX 707-541-7030 REV 1 Sheet 1 of 8 However, no responsibility is assumed