Ultra-miniature, Low Power, kHz SMD MEMS Oscillator
|
|
|
- Noah Tyler
- 6 years ago
- Views:
Transcription
1 ESD Sensitive Moisture Sensitivity Level (MSL) 1 FEAURES: Ultra-miniature size: Supply Voltage: 1.5V to 3.63V Ultra-Low Current Consumption: 1.0µA typ.(no load) Frequency Stabilities include: ±75ppm over -10 to +70 C ±100ppm over -40 to +85 C Internal power supply filtering eliminates external bypass capacitor for Vdd port. High Performance MEMS echnology by Siime APPLICAIONS: General imekeeping Battery Management Portable devices RC reference clock Bluetooth/WiFi modules SANDARD SPECIFICAIONS: Parameters Min yp Max Unit Notes Output Frequency (F out ) khz Initial Frequency olerance (F init ) (1) ppm A = +25 C, post reflow, V dd : V Frequency Stability over emperature A = -10 C to +70 C, V dd : V (F stab ) (2) ppm A = -40 C to +85 C, V dd : V Aging (@+25 C) ppm First year Supply Voltage (V dd ) V A = over temperature 1.0 A = +25 C, V dd : V. No load. Current Consumption ( I dd ) 1.9 µa A = -10 C to +70 C, V dd max: 3.63V. No load 2.2 A = -40 C to +85 C, V dd max: 3.63V. No load. Power Supply Ramp (t Vdd_Ramp ) 100 ms Over temperature, 0 to 90% V dd A = +25 C±10 C Start-up ime at Power-up ( start ) 450 ms A = -40 C to +70 C 500 A = +85 C Operating emperature Range ( use ) Option M C Option L LVCMOS Output ( A = Over emperature. ypical values are at A = +25 C) Output Rise/Fall ime (t r /t f ) ns 10-90%, 15pF load, V dd : V Output Clock Duty Cycle % Output Voltage V OH 90%*V dd V dd : V. I OH = -10µA, 15pF V V OL 10%*V dd V dd : V. I OL = 10µA, 15pF 80% LVCMOS swing, V Output Drive Level 50 pf dd :1.8V, 2.5V, 3.3V Period Jitter ( jitt ) 35 nsrms Cycles 10000, A = +25 C Note: 1. Measured peak-to-peak. ested with Agilent 53132A frequency counter. Due to the low operating frequency, the gate time must be 100ms to ensure an accurate frequency measurement. 2. Measured peak-to-peak. Inclusive of initial tolerance at +25 C, and variations over operating temperature, rated power supply voltage and load.
2 Absolute Maximum Ratings Attempted operation outside the absolute maximum ratings may cause permanent damage to the part. Actual performance of the IC is only guaranteed within the operational specifications, not at absolute maximum ratings. Parameters est Condition Value Unit Continuous Power Supply Voltage Range (V dd ) -0.5 to 3.63 V Short Duration Max. Power Supply Voltage (V dd ) 30 minutes 4.0 V Short Duration Max. Operating emperature Range Vdd: V, 30 minutes 125 C Human Body Model (HBM) ESD Protection JESD22-A V Charge-Device Model (CDM) ESD Protection JESD22-C V Machine Model (MM) ESD Protection JESD22-A V Latch-up olerance JESD78 Compliant Mechanical Shock Resistance Mil 883, Method g Mechanical Vibration Resistance Mil 883, Method g 2012 SMD Junction emperature 150 C S torage emperature -65 to +150 C Block Diagram: PAR IDENIFICAION: khz - - Operating emp. M: -10 C ~ +70 C L: -40 C ~ +85 C Freq. Stability P: ±75ppm (-10 C ~ +70 C only) Q: ±100 ppm (-40 C ~ +85 C only) Packaging Blank: Bulk : ape & Reel (1kpcs / reel) 3: ape & Reel (3kpcs / reel) 10: ape & Reel (10kpcs / reel)
3 YPICAL PERFORMANCE DAA (A=25 C, Vdd=1.8V, unless otherwise stated) Initial olerance Histogram Frequency Stability vs. Operating emperature Range Supply Current vs Operating emperature Range (No Load) Start-up ime Power Supply Noise Rejection (±150mV Noise) LVCMOS Output Waveform (V swing = 1.8V)
4 OULINE DRAWING: Recommended Land Pattern Pin Name I/O Functionality 1 NC No Connect No connection. Will not respond to any input signal 2 GND Power Supply Ground Connect to ground. All GND pins must be connected to power supply ground. 3 CLK Out OU Oscillator clock output. 4 V dd Power Supply Connect to power supply 1.5V V dd 3.63V. Under normal operating conditions, V dd doesn t require external bypass/decoupling capacitor(s). Internal power supply filtering will reject more than ±150mVpp with frequency components through 10MHz Dimensions: mm REFLOW PROFILE: Item Conditions S MAX to L (Ramp-up Rate) 3 C/second max Preheat emperature Minimum ( S MIN) 150 C emperature ypical ( S YP) 175 C emperature Maximum ( S MAX) 200 C ime (t S ) seconds Ramp-up Rate ( L to P ) 3 C/second max ime Maintained Above emperature ( L ) 217 C ime (t L ) seconds Peak emperature ( P ) 260 C max arget Peak emperature ( P arget) 255 C ime within 5 C of actual peak (t P ) seconds Max. Number of Reflow Cycles 3 Ramp-down Rate 6 C/second max ime 25 C to Peak emperature (t) 8 minutes max
5 APE & REEL: D0 D1 min. E1 E2 min. F P0 P1 P2 1.55± ± ± ± ± ± max. 2 max. W max. A0 B0 K0 0.25±0.05 NA NA ± ± ±0.05 Option A max. B min. C D min. N W1 W2 max. & / ± / ± ± / = ape and reel (1,000pcs/reel) 3= ape and reel (3,000pcs/reel) 10= ape and reel (10,000pcs/reel) Unit: mm AENION: Abracon Corporation s products are COS Commercial-Off-he-Shelf products; suitable for Commercial, Industrial and, where designated, Automotive Applications. Abracon s products are not specifically designed for Military, Aviation, Aerospace, Life-dependant Medical applications or any application requiring high reliability where component failure could result in loss of life and/or property. For applications requiring high reliability and/or presenting an extreme operating environment, written consent and authorization from Abracon Corporation is required. Please contact Abracon Corporation for more information.
Ultra-miniature, Low Power, kHz MEMS Oscillator
ESD Sensitive Moisture Sensitivity Level (MSL) 1 FEATURES: APPLICATIONS: Ultra-miniature size: Supply oltage: 1.2 to 3.63 (-10 ~ +70); 1.5 to 3.63 (-40 ~ +85) Ultra-Low Current Consumption: 1.4µA max.
Ultra-miniature, Low Power, kHz MEMS Oscillator
ESD Sensitive Moisture Sensitivity Level (MSL) 1 FEATURES: APPLICATIONS: Factory programmable output frequency: 1Hz to 32.768kHz Available in two types of ultra-miniature packages: 2.0 x 1.2 x 0.6mm (SMD);
Ultra-miniature, Low Power, kHz MEMS Oscillator
Moisture Sensitivity Level (MSL) 1 ESD Sensitive FEATURES: Smallest 32.768kHz TCXO in the market: 1.54 x 0.84 x 0.6mm Supply oltage: 1.5 to 3.63 Ultra-Low Current Consumption: 1.52µA max.(core current,
Low power, Programmable SMD MEMS Oscillator
Moisture Sensitivity Level (MSL) 1 SD Sensitive AS: APPLICAIONS: GPON, PON Portable devices Consumer electronics Network switches, router, servers thernet, S, SAA, SAS, irewire Harsh environment (vibration,
MEMS Ultra-Low Power Oscillator, khz Quartz XTAL Replacement
33Features: MEMS Technology Small SMD package: 2.0 x 1.2 mm (2012) Fixed 32.768 khz output frequency NanoDrve TM programmable output swing for lowest power Pb-free, RoHS and REACH compliant Typical Applications:
Key Electrical Specifications Parameters Minimum Typical Maximum Units Notes ppm
Moisture Sensitivity Level (MSL) 1 FEATURES: Ultra low phase Jitter: 0.2ps max integrated 12 khz to 20 MHz BW ±50ppm total frequency stability over -40 C to +85 C temperature range Output type: LVCMOS,,
PERFORMANCE PLASTIC PACKAGE ULTRA MINIATURE PURE SILICON TM CLOCK OSCILLATORS ASDMP Series
ASDMP Series FEATURES: Ultra Miniature Pure SiliconTM Clock Oscillator High Performance MEMS Technology by Discera Low Power Consumption for high speed communication Exceptional Stability Over Temp. at
Ultra Low Phase Noise VCXO
FEATURES: High "Q", 3rd Overtone Crystal Technology Ultra Low Phase Noise -162 dbc/hz Typ. @ 10kHz offset, 100MHz carrier Standard LVCMOS RF Output Wide Operating Temperature (-40ºC to +85ºC) standard
ELECTRICAL SPECIFICATIONS PARAMETER SYMBOL CONDITION VALUE UNIT
MEMS Oscillator Page 1 of 5 Ultra Low power: < 1 A Fixed 32.768 khz No Supply Voltage external bypass capacitors required XTAL replacement in 2.0 mm x 1.2 mm SMD SMD package 2.0 x 1.2 mm ELECTRICAL SPECIFICATIONS
Parameter Symbol Min. Typ. Max. Unit Condition Frequency and Stability Output Frequency Fout khz
Features 32.768 khz ±5, ±10, ±20 ppm frequency stability options over temp World s smallest TCXO in a 1.5 x 0.8 mm CSP Operating temperature ranges: 0 C to +70 C -40 C to +85 C Ultra-low power:
PECL, LVDS, CMOS Output Low Jitter SMD Crystal Oscillator
PECL, LDS, CMOS Output Low Jitter SMD Crystal Oscillator 7. x. x 1.mm Moisture Sensitivity Level (MSL) This product is Hermetically Sealed and not Moisture Sensitive - MSL = N/A: Not Applicable FEATURES:
Ultra Low Phase Noise XO / VCXO
FEATURES: High "Q", 3rd Overtone Crystal Technology Ultra Low Phase Noise -162 Typ. @ 10k, 100MHz carrier Standard LVCMOS RF Output Wide Operating Temperature (-40ºC to +85ºC) standard ±28 ppm Max. All
Ultra-Low Phase Jitter SMD Clock Oscillator
ASMX Moisture Sensitivity Level MSL 3 FEATURES: Excellent integrated phase jitter ±50ppm total frequency stability over -40 C to +85 C temperature range Output Type: LCMOS, LDS, LPECL, HCSL Industry standard
XCO FAST TURNAROUND CLOCK OSCILLATOR HIGH FREQUENCY, LOW JITTER CLOCK OSCILLATOR FEATURES + DESCRIPTION SELECTOR GUIDE LVCMOS LVDS LVPECL
XCO FAST TURNAROUND DESCRIPTION FEATURES + The XCO clock series is a cutting edge family of low to high frequency, low jitter output, single or multi - frequency clock oscillators. The XCO clocks are available
Electrical Characteristics
Preliminary Features Small SMD package: 2.0 x 1.2 mm (2012) [1] Pin-compatible to 2012 XTAL SMD package SOT23-5 package option for industrial applications Ultra-low power:
HIGH FREQUENCY, LOW JITTER CLOCK OSCILLATOR
DESCRIPTION FEATURES + The XCO clock series is a cutting edge family of low to high frequency, low jitter output, single or multi - frequency clock oscillators. The XCO clocks are available in 7.0 x 5.0,
Excellent Integrated System Limited
Excellent Integrated System Limited Stocking Distributor Click to view price, real time Inventory, Delivery & Lifecycle Information: Abracon Corporation AST3TQ-T-10.000MHZ-50-C For any questions, you can
TEMPERATURE COMPENSATED/ VOLTAGE CONTROLLED CRYSTAL OSCILLATOR
TEMPERATURE COMPENSATED/ VOLTAGE CONTROLLED CRYSTAL OSCILLATOR ASTX-12, ASVTX-12 FEATURES: 2.5 X 2.0 X 0.9mm APPLICATIONS: Ultra miniature and low height 0.9mm. Low current consumption 2mA. Vc function
MEMS Oscillator, Low Power, LVCMOS, MHz to MHz
Features: MEMS Technology Direct pin to pin drop-in replacement for industry-standard packages LVCMOS Compatible Output Industry-standard package 2.0 x 1.6, 2.5 x 2.0, 3.2 x 2.5, 5.0 x 3.2, and 7.0 x 5.0
ULTRA-LOW POWER OSCILLATOR
ULTRA-LOW POWER OSCILLATOR SERIES ULPO-RB2 FEATURES + Ultra-Low Power Oscillator for Low Cost + Excellent long time reliability + Pin-compatible to 2012 XTAL SMD packaging + ±20 ppm frequency tolerance
Oven Controlled Crystal Oscillators
Moisture Sensitivity Level (MSL) 1 OVERVIEW: Abracon s AOCJYR series of World s Smallest Profile, Surface Mount- Ovenized Quartz Crystal Oscillators are based on Proprietary MercuryTM ASIC technology,
SiT1534 Ultra-Small, Ultra-Low Power 1 Hz khz Programmable Oscillator
Features Factory programmable from 32.768 khz down to 1 Hz
Oven Controlled Crystal Oscillators
Moisture Sensitivity Level (MSL) 1 OVERVIEW: Abracon s AOCJYR series of World s Smallest Profile, Surface Mount- Ovenized Quartz Crystal Oscillators are based on Proprietary MercuryTM ASIC technology,
SiT1532 Smallest Footprint (1.2mm 2 ) CSP 10 ppm Ultra-Low Power khz XTAL Replacement
SiT1532 Smallest Footprint (1.2mm 2 ) CSP 10 ppm Ultra-Low Power 32.768 khz XTAL Replacement Features Smallest footprint in chip-scale (CSP): 1.5 x 0.8 mm Fixed 32.768 khz
Low Power MEMS Jitter Attenuator
Moisture Sensitivity Level: MSL= FEATURES: Low power and miniature package programmable jitter attenuator Input/output frequency up to 200MHz I/O pins can be configured as output enable (OE), frequency
Features. o HCSL, LVPECL, or LVDS o HCSL/LVPECL, HCSL/LVDS, LVPECL/LVDS. o Ext. Industrial: -40 to 105 C o o. o 30% lower than competing devices
General Description The DSC557-03 is a crystal-less, two output PCI express clock generator meeting Gen1, Gen2, and Gen3 specifications. The clock generator uses proven silicon MEMS technology to provide
SPM0437HD4H-B. Digital SiSonic TM Microphone. The SPM0437HD4H is a miniature, highperformance,
Digital SiSonic TM Microphone The SPM0437HD4H is a miniature, highperformance, low power, top port silicon digital microphone with a single bit PDM output. Using Knowles proven high performance SiSonic
Oven Controlled Crystal Oscillators
Moisture Sensitivity Level (MSL) 1 OERIEW: Abracon s AOCJYR series of World s Smallest Profile, Surface Mount- Ovenized Quartz Crystal Oscillators are based on Proprietary MercuryTM ASIC technology, patented
AMJD-SERIES. fout = 27MHz, VDD=1.8V,
FEATURES APPLICATIONS Output selectable between 2 frequencies Compact footprint as small as 1.6x1.2mm Low power consumption 1MHz to 100MHz output frequency range Short lead time for new frequencies Wide
Low-Jitter I 2 C/SPI Programmable CMOS Oscillator
Datasheet General Description The DSC2110 and series of programmable, highperformance CMOS oscillators utilize a proven silicon MEMS technology to provide excellent jitter and stability while incorporating
ClearClock Ultra-Low Jitter & Power Optimized 5.0 x 3.2 mm XO. (3): Stability over OTR. D: ±15ppm over -20 C to +70 C F: ±20ppm over -40 C to +85 C
Features Ultra-Low Jitter: 125 fs Typ RMS (200fs MAX, F>250MHz); spurs included Available with any frequency from 50MHz to 2100MHz Factory programmable; samples available within 1-2 week lead times Lowest
32.768kHz IoT Optimized SMD Crystal
FEATURES Electrical Specifications Industry s smallest Tuning Fork Crystal (1.20 x 1.00 x 0.35 mm package) Ideally suited for space constraint IoT, Wearables & Wireless applications Simultaneously optimized
Parameters Symbol Min. Typ. Max. Unit Condition Frequency Range Output Frequency Range f MHz
Features Any frequency between 1 MHz and 110 MHz accurate to 6 decimal places Operating temperature from -40 C to +85 C. Refer to MO2018 for -40 C to +85 C option and MO2020 for -55 C to +125 C option
SMD TCXO/VCTCXO ASTXR-12 OVERVIEW: ESD Sensitive. Revised: Moisture Sensitivity Level (MSL) 1
ESD Sensitive Moisture Sensitivity Level (MSL) 1 OERIEW: Abracon s ASTXR series of Temperature Compensated Crystal Oscillators are based on an Advanced-Analog Temperature Compensation Integrated Circuit,
Parameters Symbol Min. Typ. Max. Unit Condition Frequency Range. Frequency Stability and Aging ppm ppm ppm ppm
Features Frequencies between 115.194001 MHz to 137 MHz accurate to 6 decimal places Operating temperature from -40 C to +125 C. For -55 C option, refer to MO8920 and MO8921 Supply voltage of +1.8V or +2.5V
Dynamic Engineers Inc.
Features and Benefits Standard and custom frequencies up to 2100 MHz Femto-second (f sec.) RMS phase jitter Short lead time Typical Applications Low noise synthesizer VCO reference Optical Communication
ULTRA-LOW POWER HIGH PRECISION OSCILLATOR
ULTRA-LOW POWER HIGH PRECISION OSCILLATOR SERIES ULPPO 32.768 khz FEATURES + Ultra Low Power High Precision Oscillator for Low Cost + Excellent long time reliability outperforms quartz-based XO + 32.768
SPK0833LM4H-B. Digital Zero-Height SiSonic TM Microphone. The SPK0833LM4H-B is a miniature, highperformance,
Digital Zero-Height SiSonic TM Microphone The SPK0833LM4H-B is a miniature, highperformance, low power, bottom port silicon digital microphone with a single bit PDM output. Using Knowles proven high performance
SPH0641LU4H-1. Digital Zero-Height SiSonic TM Microphone With Multi-Mode And Ultrasonic Support. The SPH0641LU4H-1 is a miniature, highperformance,
Digital Zero-Height SiSonic TM Microphone With Multi-Mode And Ultrasonic Support The SPH0641LU4H-1 is a miniature, highperformance, low power, bottom port silicon digital microphone with a single bit PDM
VSS4 series 3.3 Volt Spread Spectrum CMOS Oscillator
VSS4 series 3.3 Volt Spread Spectrum CMOS Oscillator Features CMOS output Output frequencies to 168 MHz Tri-state output for board test and debug -10/70 or 40/85 C operating temperature Gold over nickel
DSC2011. Low-Jitter Configurable Dual CMOS Oscillator. General Description. Features. Block Diagram. Applications
General Description The DSC2011 series of high performance dual output CMOS oscillators utilize a proven silicon MEMS technology to provide excellent jitter and stability while incorporating additional
ELECTRICAL SPECIFICATIONS PARAMETER SYMBOL CONDITION VALUE UNIT. Supply Voltage Vs Vs=+1.8V±5% is only for CML V
MEMS Differential Page 1 of 8 1 to 220 MHz High Performance LVPECL/ HCSL / LVDS / CML output High frequency stability SMD package 7.0 x 5.0 mm ELECTRICAL SPECIFICATIONS PARAMETER SYMBOL CONDITION VALUE
Pb RoHS. ASG-D Series; LVDS Output STANDARD SPECIFICATIONS: 7.0 x 5.0 x 1.9mm APPLICATIONS: FEATURES:
APPLICATIONS: Networking, SONET/SDH WiMax / WLAN Computing Phase Locked Loo Direct Digital Synthesis (DDS) DSL/ADSL Base Terminal Stations FEATURES: ASG series is a High Performance crystal based oscillator;
SPH0641LM4H-1. Digital Zero-Height SiSonic TM Microphone With Multiple Performance Modes. The SPH0641LM4H-1 is a miniature, highperformance,
Digital Zero-Height SiSonic TM Microphone With Multiple Performance Modes The SPH0641LM4H-1 is a miniature, highperformance, low power, bottom port silicon digital microphone with a single bit PDM output.
Preliminary. 2.0 FREQUENCY CHARACTERISTICS Line Parameter Test Condition Value Unit 2.1 Frequency 8 to 1500 MHz 2.2 Operating Temperature Range
RXO5032P SMD Clock Oscillator () High Performance XO in 5 x 3.2 mm Surface Mount package Product description The RXO5032P XO combines very low RMS phase jitter and tight frequency stability in a small
Frequency Translator / Jitter Attenuator
Moisture Sensitivity Level (MSL) This product is not Moisture Sensitive MSL = N/A: Not Applicable FEATURES: APPLICATIONS: Frequency translation, clock smoothing and jitter attenuation of the input 5x7x2
High Performance MEMS Jitter Attenuator
Moisture Sensitivity Level: MSL=1 FEATURES: APPLICATIONS: Low power and miniature package programmable jitter attenuator 1/10/40/100 Gigabiy Ethernet (GbE) Input frequency up to 200MHz SONET/SDH Output
Features. o HCSL, LVPECL, or LVDS o HCSL/LVPECL, HCSL/LVDS, LVPECL/LVDS. o Ext. Industrial: -40 to 105 C. o o. o 30% lower than competing devices
DSC55703 General Description The DSC55703 is a crystalless, two output PCI express clock generator meeting Gen1, Gen2, and Gen3 specifications. The clock generator uses proven silicon MEMS technology to
SiT mm 2 µpower, Low-Jitter, 1Hz 2.5 MHz Super-TCXO
SiT1576 1.2mm 2 µpower, Low-Jitter, 1Hz 2.5 MHz Super-TCXO Features 1 Hz to 2.5 MHz ±5 ppm all-inclusive frequency stability Factory programmable output frequency World s smallest TCXO Footprint: 1.2 mm
DSC1033. General Description
DSC1.V LowPower CMOS Oscillator General Description The DSC1 is a.v fixed frequency MEMS based PureSilicon Oscillator. It can be factory programmed to any frequency from 1 to 15MHz. The DSC1 incorporates
VVC1 VVC2 Voltage Controlled Crystal Oscillator
VVC1 VVC2 Voltage Controlled Crystal Oscillator Features The VVC1 Voltage Controlled Crystal Oscillator VCXO with a CMOS output Small 5.0 X 7.0 X 1.9 mm package Output frequencies to 66 MHz 5.0 or 3.3
DSC2042. Low-Jitter Configurable HCSL-LVPECL Oscillator. General Description. Features. Block Diagram. Applications
LowJitter Configurable HCSLLVPECL Oscillator General Description The DSC2042 series of high performance dual output oscillators utilize a proven silicon MEMS technology to provide excellent jitter and
VCC4 series 1.8, 2.5, 3.3, 5.0 volt CMOS Oscillator
CC series 1., 2.5,., 5.0 volt CMOS Oscillator Features CMOS output Output frequencies to 125 MHz Low jitter, Fundamental or rd OT Crystal Tristate output for board test and debug 10/70 or 0/5 C operating
VX-805 Voltage Controlled Crystal Oscillator
VX-805 Voltage Controlled Crystal Oscillator VX-805 Description The VX-805 is a Voltage Control Crystal Oscillator that operates at the fundamental frequency of the internal crystal. The crystal is a high-q
Programmable Low-Jitter Precision CMOS Oscillator
DSC8121 General Description The DSC8101 & DSC8121 series of high performance fieldprogrammable oscillators utilizes a proven silicon MEMS technology to provide excellent jitter and stability over a wide
DSC2022. Low-Jitter Configurable Dual LVPECL Oscillator. Features. General Description. Block Diagram. Applications
General Description The DSC2022 series of high performance dual output oscillators utilize a proven silicon MEMS technology to provide excellent jitter and stability while incorporating additional device
SPK0838HT4H-B. Digital High-SNR SiSonic TM Microphone
Digital High-SNR SiSonic TM Microphone The SPK0838HT4H-B is a miniature, highperformance, low power, top port silicon digital microphone with a single bit PDM output. Using Knowles proven high performance
Low-Jitter Precision LVPECL Oscillator
DSC0 General Description The DSC0 & series of high performance oscillators utilizes a proven silicon MEMS technology to provide excellent jitter and stability over a wide range of supply voltages and temperatures.
VCC1 VCC1. CMOS Crystal Oscillator. Description. Features. Applications. Block Diagram. Output V DD GND E/D. Crystal. Oscillator
CC1 CMOS Crystal Oscillator CC1 Description ectron s CC1 Crystal Oscillator (XO) is a quartz stabilized square wave generator with a CMOS output. The CC1 uses a fundamental or 3rd overtone crystal resulting
Low-Jitter Precision LVDS Oscillator
General Description The DSC0 & series of high performance oscillators utilizes a proven silicon MEMS technology to provide excellent jitter and stability over a wide range of supply voltages and temperatures.
EP15E7 D 2 H M TR. Pin 1 Connection Tri-State
eries Quartz Crystal Clock Oscillators XO (PXO) LVCMO (CMO) 2.5Vdc 4 Pad 2.5mm x 3.2mm Ceramic urface Mount (MD) Frequency Tolerance/tability ±50ppm Maximum over -20 C to +70 C ELECTRICAL PECIFICATION
VVC4 Voltage Controlled Crystal Oscillator
C4 oltage Controlled Crystal Oscillator Features ectron s Smallest CXO, 5.0 X 3.2 X 1.2 mm High Frequencies to 77.70 MHz 5.0 or 3.3 operation Linearity 10% Tri-State Output for testing Low jitter < 1ps
VCC6-L/V 2.5 or 3.3 volt LVDS Oscillator
VCC6-L/V 2.5 or 3.3 volt LVDS Oscillator Features 2.5 or 3.3 V LVDS 3rd Overtone Crystal for best jitter performance Output frequencies to 270 MHz Low Jitter < 1 ps rms, 12kHz to 20MHz Enable/Disable output
VX-705 Voltage Controlled Crystal Oscillator
X-705 oltage Controlled Crystal Oscillator X-705 Description The X-705 is a oltage Control Crystal Oscillator that operates at the fundamental frequency of the internal crystal. The crystal is a high-q
DSC1001. Low-Power Precision CMOS Oscillator. General Description. Features. Benefits. Block Diagram
DSC.8~.V LowPower Precision CMOS Oscillator General Description The DSC is a silicon MEMS based CMOS oscillator offering excellent jitter and stability performance over a wide range of supply voltages
VC-827 Differential (LVPECL, LVDS) Crystal Oscillator
C-827 Differential (LPECL, LDS) Crystal Oscillator C-827 Description ectron s C-827 Crystal Oscillator is a quartz stabilized, differential output oscillator, operating off a 2.5 or 3.3 volt power supply
Programmable Low-Jitter Precision HCSL Oscillator
Programmable LowJitter Precision HCSL Oscillator General Description The & series of high performance fieldprogrammable oscillators utilizes a proven silicon MEMS technology to provide excellent jitter
RoHS EV32C3 A 3 A M
RoH Pb EV32C3 A 3 A 1-27.000M eries RoH Compliant (Pb-free) 3.3V 6 Pad 5mm x 7mm Ceramic MD LVCMO/TTL VCXO (Tri-tate Pad 5) Operating Temperature Range 0 C to +70 C Absolute Pull Range ±50ppm Minimum Nominal
VT-802 VT-802. Temperature Compensated Crystal Oscillator. Description
T-802 Temperature Compensated Crystal Oscillator T-802 Description ectron s T-802 Temperature Compensated Crystal Oscillator (TCXO) is a quartz stabilized, CMOS output, analog temperature compensated oscillator,
VV-701 Voltage Controlled Crystal Oscillator Previous Vectron Model VVC1/VVC2
-701 oltage Controlled Crystal Oscillator Previous ectron Model C1/C2-701 Description ectron s -701 oltage Controlled Crystal Oscillator (CXO) is a quartz stabilized square wave generator with a CMOS output.
VCA1 series 3.3, 5.0 volt CMOS Oscillator
CA1 series 3.3, 5.0 volt CMOS Oscillator Features CMOS output Output frequencies to 160 MHz Tristate output for board test and debug 0/70 or 40/85 C operating temperature Product is compliant to RoHS directive
VX-703 Data Sheet VX-703. Voltage Controlled Crystal Oscillator Previous Vectron Model V-Type. Description. Features. Applications.
X-703 Data Sheet oltage Controlled Crystal Oscillator Previous ectron Model -Type X-703 Description ectron s X-703 oltage Controlled Crystal Oscillator (CXO) is a quartz stabilized square wave generator
SiT9102. Benefits. Features. Applications. Block Diagram. Pinout. LVPECL / HCSL / LVDS / CML 1 to 220 MHz High Performance Oscillator
Features Extremely low RMS phase jitter (random)
CLEARCLOCK POWER OPTIMIZED 0.12ps 5x7mm XO
FEATURES APPLICATIONS 0.125ps typ jitter (150fs MAX f > 200MHz, 25 C) Highest in-class frequency range from 50 to 2100MHz Excellent spurious suppresion 70mA MAX IDD (, any VDD) Lowest in-class power consumption
Description. Block Diagrams. Figure 1b. Crystal-Based Multiplier w/saw
C-501 oltage Controlled Crystal Oscillator C-501 Description The C-501 is a voltage controlled crystal oscillator that is housed in a hermetic 14.0 x 9.0 x 4.5mm ceramic package. Depending upon the frequency
CARDINAL COMPONENTS, INC. The Cardinal Cappuccino Crystal Oscillator CMOS TCXO 10MHz - 250MHz
SERIES CJTA The Cardinal Cappuccino Crystal Oscillator CMOS TCXO 10MHz - 250MHz Features 3.3V supply voltage- configurable 10MHz to 250MHz CMOS outputsconfigurable Better than 2Hz tuning resolution Low
VC-820 CMOS Crystal Oscillator
C-20 CMOS Crystal Oscillator C-20 ectron s C-20 Crystal Oscillator (XO) is a quartz stabilized square wave generator with a CMOS output. The C-20 uses a fundamental or a 3rd overtone crystal, oscillating
VCC4 series 1.8, 2.5, 3.3, 5.0 volt CMOS Oscillator
CC series 1.,.5,., 5.0 volt CMOS Oscillator Features CMOS output Output frequencies to 15 MHz Low jitter, Fundamental or rd OT Crystal Tristate output for board test and debug 10/70 or 0/5 C operating
DSC V Low-Power CMOS Oscillator
DSC.V LowPower CMOS Oscillator General Description The DSC is a.v fixed frequency MEMS based PureSilicon Oscillator. It can be factory programmed to any frequency from to 5MHz. The DSC incorporates an
VCC M CMOS Crystal Oscillator
CC1-1545-49M1520000 CMOS Crystal Oscillator CC1 Description ectron s CC1 Crystal Oscillator (XO) is a quartz stabilized square wave generator with a CMOS output. The CC1 uses a fundamental or 3rd overtone
PS-701 SAW Oscillator
PS-701 SAW Oscillator PS-701 The PS-701 SO (Saw Oscillator from Vectron is a high frequency, ultra low phase noise oscillator designed to support high speed data converters and 100G / 400G coherent optical
PARAMETER SYMBOL CONDITIONS VALUE UNIT
Page 1 of 6 FEATURES APPLICATIONS ±0.28 ppm Holdover Stability Mobile Phones ±4.6 ppm accuracy over all conditions Base Stations including 20 years aging Mobile Radios Miniature 5x7 mm SMD GPS Devices
Programmable Low-Jitter Precision LVDS Oscillator
General Description The & series of high performance fieldprogrammable oscillators utilizes a proven silicon MEMS technology to provide excellent jitter and stability over a wide range of supply voltages
VT-841 VT-841. Temperature Compensated Crystal Oscillator. Description. Applications. Features. Block Diagram. Output V DD.
VT-841 Temperature Compensated Crystal Oscillator VT-841 Description Vectron s VT-841 Temperature Compensated Crystal Oscillator (TCXO) is a quartz stabilized, clipped sine wave output, analog temperature
CARDINAL COMPONENTS. Operating Conditions: Description Min Max Unit
Standard Package Options Series CPP Part Numbering Example: CPP C 1 L Z - A5 B6 - XXXXXX TS CPP C 1 L Z A5 SERIES CPP OUTPUT C = CMOS T = TTL Specifications: PACKAGE STYLE 1 = Full Size 4 = Half Size 5
Ultra-Low Phase Noise OCXO
APPLICATIONS: COTS Military & Industrial Radios & Timing Circuits Cellular Infrastructure Radar Systems Test & Measurement Equipment GPS Tracking with precision hold-over accuracy WiMax / WLAN Precision
Parameters Symbol Min. Typ. Max. Unit Condition Frequency Range Output Frequency Range f MHz
Features Any frequency between 1 MHz and 110 MHz accurate to 6 decimal places 100% pin-to-pin drop-in replacement to quartz-based XO Excellent total frequency stability as low as ±20 ppm Operating temperature
0.350± (8.89±0.13) Q-TECH P/N FREQ. D/C S/N 0.200±.005 (5.080±0.13) 0.018±.003 (.457±0.076) max. (8.00 max.)
Description Q-ech s surface-mount Q94 oscillators consist of a 5Vdc, 3.3Vdc, 2.5Vdc, 1.8Vdc CMOS or L output oscillator IC and a round A high-precision quartz crystal built in a rugged surface-mount ceramic
MX-600 Microprocessor Controlled Crystal Oscillator High Precision
MX-600 Microprocessor Controlled Crystal Oscillator High Precision MX-600 Features Ultra High Stability MCXO Low Power Consumption Meets Stratum 3 acc. GR-1244 ROHS 6 Compliant Frequency Range 1 : 8-40
Features. General Description. Applications. Pin Configuration. Ordering and Marking Information. Hall Effect Micro Switch IC
Hall Effect Micro Switch IC Features General Description Micro Power Operation for Battery Applications Chopper Stabilized Amplifier Independent of North or South Pole Magnet, Easy for Manufacture Small
VCC6-Q/R Series 2.5 and 3.3 volt LVPECL Crystal Oscillator
CC6-Q/R Series 2.5 and 3.3 volt LPECL Crystal Oscillator Features 2.5 or 3.3 LPECL 3 rd Overtone Crystal for best jitter performance Output frequencies to 270 MHz 0.2pS rms jitter, 12kHz-20MHz,155.52MHz
J-Type Voltage Controlled Crystal Oscillator
J-Type Voltage Controlled Crystal Oscillator Product is compliant to RoHS directive and fully compatible with lead free assembly Features Output Frequencies from 1.024 MHz to 170.000 MHz +3.3 or +5.0 volt
ELECTRICAL SPECIFICATIONS PARAMETER SYMBOL CONDITION VALUE UNIT. 52 standard frequencies between 3.57MHz and MHz
Frequency Oscillator Page 1 of 6 Low Power Consumption of 3.5 typical at 1.8 52 Standard frequencies between 3.57MHz and 77.760 MHz HCMOS/ LCMOS compatible output SMD package 2.0 x 1.6 mm ELECTRICAL SPECIFICATIONS
Q-TECH CORPORATION khz QT381 AND QT386 SERIES ULTRA-LOW CURRENT, HIGH-TEMPERATURE REAL TIME CLOCK OSCILLATORS 2.5Vdc and 3.3Vdc - 32.
Description Q-Tech s high temperature real time clock oscillators consist of a source clock square wave generator and a miniature strip quartz crystal built in a low profile hermetically ceramic package
SiSonic TM Microphone
SPA1687LR5H-1 High SPL Differential Bottom Port SPA1687LR5H-1 Rev A Datasheet SiSonic TM Microphone The SPA1687LR5H-1 is a miniature, high-performance, low power, bottom port silicon differential microphone.
VC-827 Differential (LVPECL, LVDS) Crystal Oscillator
C-827 Differential (LPECL, LDS) Crystal Oscillator C-827 Description ectron s C-827 Crystal Oscillator is a quartz stabilized, differential output oscillator, operating off a 2.5 or 3.3 volt power supply
SiT9003 Low Power Spread Spectrum Oscillator
Features Frequency range from 1 MHz to 110 MHz LVCMOS/LVTTL compatible output Standby current as low as 0.4 µa Fast resume time of 3 ms (Typ)
VC-711 Differential (LVPECL, LVDS) Crystal Oscillator
C-7 Differential (LPECL, LDS) Crystal Oscillator C-7 Description ectron s C-7 Crystal Oscillator is a quartz stabilized, differential output oscillator, operating off either a 2.5 or 3.3 volt power supply
Oven Controlled Crystal Oscillators
Moisture Sensitivity Level (MSL) 1 OVERVIEW: Abracon s series of World s Smallest Profile, Surface Mount- Ovenized Quartz Crystal Oscillators are based on Proprietary MercuryTM ASIC technology, patented
IS31FL3726 IS31FL CHANNEL COLOR LED DRIVER. June 2018
16-CHANNEL COLOR LED DRIVER GENERAL DESCRIPTION The IS31FL3726 is comprised of constant-current drivers designed for color LEDs. The output current value can be set using an external resistor. The output