Photocoupler Product Data Sheet CNY17-1 THRU CNY17-4 SERIES Spec No.: DS Effective Date: 12/11/2015 LITE-ON DCC RELEASE

Transcription

1 Phtcupler Prduct Data Sheet CNY17-1 THRU CNY17-4 Spec N.: DS Effective Date: 12/11/215 Revisin: C LITE-ON DCC RELEASE BNS-OD-FC1/A4 LITE-ON Technlgy Crp. / Optelectrnics N.9,Chien 1 Rad, Chung H, New Taipei City 23585, Taiwan, R.O.C. Tel: Fax: /

2 Phtcuplers CNY17-1-V thru CNY17-4-V 1. DESCRIPTION 1.1 Features Current transfer rati (CTR : MIN. 4% at I F = ma, V CE = 5V) High cllectr-emitter vltage V CEO = 7V High input-utput islatin vltage Vis = 5,Vrms Respnse time (tr : TYP. 5 s at VCE = V, IC = 2mA, RL = ) Dual-in-line package : CNY17-1-V, CNY17-2-V, CNY17-3-V, CNY17-4-V Wide lead spacing package : CNY17-1M-V, CNY17-2M-V, CNY17-3M-V, CNY17-4M-V Surface munting package : CNY17-1S-V, CNY17-2S-V, CNY17-3S-V, CNY17-4S-V Tape and reel packaging : CNY17-1S-TA-V, CNY17-2S-TA-V, CNY17-3S-TA-V, CNY17-4S-TA-V CNY17-1S-TA1-V, CNY17-2S-TA1-V, CNY17-3S-TA1-V, CNY17-4S-TA1-V Safety apprval * UL apprved (N. E113898) * TUV apprved (N. R965363) * CSA apprved (N. CA ) * FIMKO apprved ( N ) * VDE apprved ( N ) * BSI apprved (N ) * CQC apprved (N.CQC ) Creepage distance > 8. mm ; Clearance > 8. mm The relevant mdels are the mdels Apprved by VDE accrding t DIN EN Apprved Mdel N.: CNY17-1-V, CNY17-2-V, CNY17-3-V, CNY17-4-V CNY17-1M-V, CNY17-2M-V, CNY17-3M-V, CNY17-4M-V CNY17-1S-V, CNY17-2S-V, CNY17-3S-V, CNY17-4S-V CNY17-1S-TA-V, CNY17-2S-TA-V, CNY17-3S-TA-V, CNY17-4S-TA-V CNY17-1S-TA1-V, CNY17-2S-TA1-V, CNY17-3S-TA1-V, CNY17-4S-TA1-V VDE apprved N.: (Accrding t the specificatin DIN EN ) Operating islatin vltage VIORM : 85V (Peak) Transient vltage VTR : 6V (Peak) Pllutin : 2 (Accrding t VDE 1-1 : ) Clearances distance (Between input and utput) : 7.mm (MIN.) Creepage distance (Between input and utput) : 7.mm (MIN.) Islatin thickness between input and utput :.4mm (MIN.) 1/14

3 Phtcuplers CNY17-1-V thru CNY17-4-V Safety limit values Current (Isi) : 4mA (Dide side) Pwer (Psi) : 7mW (Phttransistr side) Temperature(Tsi) : 175 C In rder t keep safety electric islatin f phtcupler, please set the prtective circuit t keep within safety limit values when the actual applicatin equipment trubled. Indicatin f VDE apprval prints " " n sleeve package. RHS Cmpliance All materials be used in device are fllwed EU RHS directive (N.22/95/EC). ESD pass HBM 8V/MM2V MSL class1 1.2 Applicatins Pwer Supply regulatrs Digital lgic inputs Micrprcessr inputs Appliance Sensr Systems Industrial Cntrls 2/14

4 Phtcuplers CNY17-1-V thru CNY17-4-V 2. PACKAGE DIMENSIONS 2.1 CNY17-1-V, CNY17-2-V, CNY17-3-V, CNY17-4-V : 2.2 CNY17-1M-V, CNY17-2M-V, CNY17-3M-V, CNY17-4M-V : Ntes : 1. Year date cde digit wrk week. 3. Factry identificatin mark shall be marked (Y: Thailand, W: China-CZ, X: China-TJ). 4. Mdel N.: CNY17-1, CNY17-2, CNY17-3, CNY17-4 3/14

5 Phtcuplers CNY17-1-V thru CNY17-4-V 2.3 CNY17-1S-V, CNY17-2S-V, CNY17-3S-V, CNY17-4S-V : Ntes : 1. Year date cde digit wrk week. 3. Factry identificatin mark shall be marked (Y: Thailand, W: China-CZ, X: China-TJ). 4. Mdel N.: CNY17-1, CNY17-2, CNY17-3, CNY17-4 4/14

6 Phtcuplers CNY17-1-V thru CNY17-4-V 2. TAPING DIMENSIONS CNY17-1S-TA-V, CNY17-2S-TA-V, CNY17-3S-TA-V, CNY17-4S-TA-V : CNY17-1S-TA1-V, CNY17-2S-TA1-V, CNY17-3S-TA1-V, CNY17-4S-TA1-V : Descriptin Symbl Dimensin in mm (inch) Tape wide W 16±.3 (.63) Pitch f sprcket hles P 4±.1 (.15) F 7.5±.1 (.295) Distance f cmpartment P 2 2±.1 (.79) Distance f cmpartment t cmpartment P 1 12±.1 (.472) 5/14

7 Phtcuplers CNY17-1-V thru CNY17-4-V 4. RATING AND CHARACTERISTICS 4.1 Abslute Maximum Ratings at Ta=25 C Parameter Symbl Rating Unit Frward Current I F 6 ma Input Reverse Vltage V R 6 V Pwer Dissipatin P mw Cllectr - Emitter Vltage V CEO 7 V Emitter - Cllectr Vltage V ECO 7 V Output Cllectr - Base Vltage V CBO 7 V Cllectr Current I C 15 ma Cllectr Pwer Dissipatin P C 15 mw Ttal Pwer Dissipatin P tt 25 mw *1 Islatin Vltage V is 5 V rms Operating Temperature T pr -55 ~ + C Strage Temperature T stg -55 ~ +15 C *2 Sldering Temperature T sl 26 C *1. AC Fr 1 Minute, R.H. = 4 ~ 6% Islatin vltage shall be measured using the fllwing methd. (1) Shrt between ande and cathde n the primary side and between cllectr and emitter n the secndary side. (2) The islatin vltage tester with zer-crss circuit shall be used. (3) The wavefrm f applied vltage shall be a sine wave. *2. Fr Secnds 6/14

8 Phtcuplers CNY17-1-V thru CNY17-4-V 4.2 ELECTRICAL OPTICAL CHARACTERISTICS at Ta=25 C PARAMETER SYMBOL MIN. TYP. MAX. UNIT CONDITIONS Frward Vltage VF V IF=6mA INPUT Reverse Current IR A VR=6V Terminal Capacitance Ct pf V=, f=1khz Cllectr Dark Current ICEO 5 na VCE=V, IF= OUTPUT Cllectr-Emitter Breakdwn Vltage Emitter-Cllectr Breakdwn Vltage BVCEO 7 V BVECO 7 V IC=.1mA IF= IE= A IF= Cllectr-Base Breakdwn Vltage BVCBO 7 V IC=.1mA IF= CNY Current *Transfer Rati CNY CTR CNY % IF=mA VCE=5V CNY TRANSFER CHARACTERISTICS Cllectr-Emitter VCE(sat).3 V Saturatin Vltage Islatin Resistance Ris G IF=mA IC=2.5mA DC5V 4 ~ 6% R.H. Flating Capacitance Cf 2 pf V=, f=1mhz Respnse Time (Rise) tr 5 s VCE=V, IC=2mA Respnse Time (Fall) tf 5 s RL= *CTR I C % I F 7/14

9 Phtcuplers CNY17-1-V thru CNY17-4-V 4.3 ISOLATION SPECIFICATION ACCORDING TO VDE Parameter Symbl Cnditins Rating Unit Remark Class f envirnmental test - DIN IEC68 55//21 - Pllutin - DIN VDE1 2 - Maximum Operating Islatin Vltage Partial Discharge Test Vltage (Between Input and Output) V IORM - 85 V PEAK Diagram 1 tp=6s, qc<5pc 1275 V PEAK Vpr Diagram 2 tp=1s, qc<5pc 1594 V PEAK Refer t the Diagram 1, 2 Maximum Over-vltage V INITIAL t INI = s 6 V PEAK Safety Maximum Ratings 1) Case Temperature Tsi I F =, Pc = 175 C Refer t the 2) Input Current Isi Pc= 4 ma Figure 1, 3 3) Electric Pwer (Output r Ttal Pwer Issipatin) Islatin Resistance Psi - 7 mw Ta=Tsi MIN. 9 (Test Vltage Between Input and Output : DC5V) R ISO Ta=Tpr(MAX.) MIN. 11 Ta=25 C MIN. 12 Precautins in perfrming islatin test * Partial discharge test methds shall be the nes accrding t the specificatins f DIN EN * Please dn't carry ut islatin test (Vis) ver V INITIAL,This prduct deterirates islatin characteristics by partial discharge due t applying high vltage (ex. V INITIAL ). And there is pssibility that this prduct ccurs partial discharge in perating islatin vltage (V IORM) 8/14

10 Phtcuplers CNY17-1-V thru CNY17-4-V 4.4 PARTIAL DISCHARGE TEST METHOD M ethd (A) fr typ e testing and rand m testing. V V INTIAL t1 tini t2 t3 V pr tp tb t4 V IO RM t t1, t2 = 1 t s t3, t4 = 1s tp (Partial Discharge M easuring Tim e)= 6s tb = 62s tini = s M ethd (B) fr rutine testing. V V pr V IO RM t3, t4 =.1s tp (Partial Discharge M easuring Tim e)= 1s tb = 1.2s t3 tp tb t4 t The partial discharge level shall nt exceed 5 pc during the partial discharge measuring time interval t p under the test cnditins shwn abve. 9/14

11 Phtcuplers CNY17-1-V thru CNY17-4-V 5. CHARACTERISTICS CURVES Fig.1 Frward Current vs. Am bient Tem perature Fig.2 Cllectr Pwer Dissipatin vs. Am bient Tem perature Frward current I (ma) F Ambient temperature Ta ( C) Ambient temperature Ta ( C) Cllectr pwer dissipatin Pc (mw) Fig.3 Cllectr-em itter Saturatin Vltage vs. Frward Current Fig.4 Frward Current vs. Frward Vltage Cllectr-emitter saturatin vltage V (sat) (V) Ic=.5m A 1m A 2m A 3m A 5m A Frward current I F (ma) Ta= 25 C Frward current I (ma) F Ta= 75 C 5 C 25 C C -25 C Frward vltage V F (V) Fig.5 Current Transfer Rati vs. Frward Current Fig.6 Cllectr Current vs. Cllectr-em itter Vltage Current transfer rati CTR (%) 2 VCE= 5V 18 Ta= 25 C R = 12 8 k 6 5k Frward current I F(mA) Cllectr current Ic (ma) 45 Ta= 25 C 4 I F = 3m A 35 2m A 3 Pc(M AX.) 25 2 m A 15 5m A 5 2m A Cllectr-emitter vltage V CE(V) /14

12 Phtcuplers CNY17-1-V thru CNY17-4-V Fig.7 R elative C urrent Transfer R ati vs. Am bient Tem perature Fig.8 C llectr-em itter Saturatin Vltage vs. Am bient Tem perature Relative current transfer rati (%) IF= ma VCE= 5V 75 Cllectr-emitter saturatin vltage V (sat) (V) IF= ma IC= 2.5mA Ambient temperature Ta ( C) Ambient temperature Ta ( C) Fig.9 C llectr D ark C urrent vs. Am bient Tem perature Fig. R espnse Tim e vs. Lad R esistance Cllectr dark current I CEO (A) VCE= V Respnse time ( s) IF= ma VCC= 5V Ta= 25 C tr tf Ambient temperature Ta ( C) Lad resistance RL (k ) Fig.11 Frequency R espnse Test C ircuit fr R espnse Tim e Vltage gain Av (db) R = 2 I F = m A Vcc= 5V Ta= 25 C Vcc Inp ut O utp ut Inp ut R D R L O utp ut td tr Test C ircuit fr Frequency R espnse Vcc ts tf % 9% R D R L O utp ut Frequency f (khz) 11/14

13 Tem perature ( C ) Phtcuplers CNY17-1-V thru CNY17-4-V 6. TEMPERATURE PROFILE OF SOLDERING 6.1 IR Reflw sldering (JEDEC-STD-2C cmpliant) One time sldering reflw is recmmended within the cnditin f temperature and time prfile shwn belw. D nt slder mre than three times. Prfile item Cnditins Preheat - Temperature Min (T Smin) - Temperature Max (T Smax) - Time (min t max) (ts) 15 C 2 C 9±3 sec Sldering zne - Temperature (T L) - Time (t L) Peak Temperature (T P) Ramp-up rate Ramp-dwn rate 217 C 6 sec 26 C 3 C / sec max. 3~6 C / sec 2 sec R am p-up TP 26 C TL 217 C Tsm ax 2 C R am p-dw n Tsm in 15 C 6 sec tl (S ldering) 25 C 6 ~ 12 sec ts (P reheat) 35~7 sec Tim e (sec) 12/14

14 Phtcuplers CNY17-1-V thru CNY17-4-V 6.2 Wave sldering (JEDEC22A111 cmpliant) One time sldering is recmmended within the cnditin f temperature. Temperature: 26+/-5 C Time: sec. Preheat temperature:25 t 14 C Preheat time: 3 t 8 sec. 6.3 Hand sldering by sldering irn Allw single lead sldering in every single prcess. One time sldering is recmmended. Temperature: 38+/-5 C Time: 3 sec max. 13/14

15 Phtcuplers CNY17-1-V thru CNY17-4-V 7. RRECOMMENDED FOOT PRINT PATTERNS (MOUNT PAD) Unit: mm 8. NAMING RULE CNY17-X(1)-(2)-(3) DEVICE PART NUMBER (1)= FORM TYPE (S, M r nne) (2)= TAPING TYPE (TA, TA1 r nne) (3)= VDE Optin 9. Ntes: LiteOn is cntinually imprving the quality, reliability, functin r design and LiteOn reserves the right t make changes withut further ntices. The prducts shwn in this publicatin are designed fr the general use in electrnic applicatins such as ffice autmatin equipment, cmmunicatins devices, audi/visual equipment, electrical applicatin and instrumentatin. Fr equipment/devices where high reliability r safety is required, such as space applicatins, nuclear pwer cntrl equipment, medical equipment, etc, please cntact ur sales representatives. When requiring a device fr any specific applicatin, please cntact ur sales in advice. If there are any questins abut the cntents f this publicatin, please cntact us at yur cnvenience. The cntents described herein are subject t change withut prir ntice. Immerge unit s bdy in slder paste is nt recmmended. 14/14