Photocoupler Product Data Sheet LTV-3083 Spec No.: DS Effective Date: 07/15/2016 LITE-ON DCC RELEASE

Size: px

Start display at page:

Download "Photocoupler Product Data Sheet LTV-3083 Spec No.: DS Effective Date: 07/15/2016 LITE-ON DCC RELEASE"

Benjamin Gordon
6 years ago
Views:

1 Phtcupler Prduct Data Sheet LTV-3083 Spec N.: DS Effective Date: 07/15/2016 Revisin: A LITE-ON DCC RELEASE BNS-OD-FC001/A4 LITE-ON Technlgy Crp. / Optelectrnics N.90,Chien 1 Rad, Chung H, New Taipei City 23585, Taiwan, R.O.C. Tel: Fax: /

2 Phtcupler 1. DESCRIPTION 1.1 Features Islatin vltage between input and utput Vis : 3,750Vrms 4pin MFP zer-crss ptislatrs triac driver utput High repetitive peak ff-state vltage V DRM : Min. 800V High critical rate f rise f ff-state vltage ( dv/dt : MIN. 1000V / s ) Mini-flat package : 2.0mm prfile : LTV-3080, LTV-3081, LTV-3082, LTV-3083 Safety apprval UL 1577 cul CA5A VDE DIN EN (VDE ) RHS Cmpliance All materials be used in device are fllwed EU RHS directive (N.2002/95/EC). ESD pass HBM 8000V / MM2000V MSL class1 1.2 Applicatins Mtr Cntrls Slid state relays Fr triggering high pwer thyristr and triac Husehld use equipment 1/11 Part N.:

3 Phtcupler 2. PACKAGE DIMENSIONS 2.1 Ntes : 1. 1-digit Year date cde, 2-digit wrk week. 2. Factry identificatin mark shall be marked (X: China -TJ) 3. I FT Rank 4. 4 r V fr VDE ptin. *All dimensins in millimeters. 2/11 Part N.:

4 Phtcupler 3. TAPING DIMENSIONS 3.1 LTV-308X-TP 3.2 LTV-308X Descriptin Symbl Dimensin in mm (inch) Tape wide W 12±0.3 (0.472) Pitch f sprcket hles P 0 4±0.1 (0.157) Distance f cmpartment Distance f cmpartment t cmpartment F 5.5±0.1 (0.217) P 2 2±0.1 (0.079) P 1 8±0.1 (0.315) 3.3 Quantities Per Reel Package Type Quantities (pcs) /11 Part N.:

5 Phtcupler 4. RATING AND CHARACTERISTICS 4.1 Abslute Maximum Ratings at Ta=25 C Parameter Symbl Rating Unit Frward Current I F 50 ma Input Reverse Vltage V R 6 V Pwer Dissipatin P D 70 mw Junctin Temperature T J 125 C Off-State Output Terminal Vltage V DRM 800 V Output Peak Repetitive Surge Current ( PW=1ms, 120pps ) V TSM 1 A Cllectr Pwer Dissipatin P C 300 mw Junctin Temperature T J 125 C Ttal Pwer Dissipatin P tt 330 mw *1. Islatin Vltage V is 3750 V rms Ambient Operating Temperature Range T A -55 ~ +115 Strage Temperature T stg -55 ~ +150 *2. Sldering Temperature T L 260 C C C *1. AC Fr 1 Minute, R.H. = 40 ~ 60% Islatin vltage shall be measured using the fllwing methd. (1) Shrt between ande and cathde n the primary side and between cllectr and emitter n the secndary side. (2) The islatin vltage tester with zer-crss circuit shall be used. (3) The wavefrm f applied vltage shall be a sine wave. *2. Fr 10 Secnds 4/11 Part N.:

6 4.2 ELECTRICAL OPTICAL CHARACTERISTICS at Ta=25 C Phtcupler Parameter Symbl Min. Typ. Max. Unit Test Cnditin Input Frward Vltage V F V I F=20mA Reverse Current I R A V R=6V Output *1 Peak Blcking Current, Either Directin Peak On-State Vltage, Either Directin *2 Critical Rate f Rise f Off-State Vltage I DRM 500 na V DRM=800V V TM 3.0 V I TM=100 ma Peak dv/dt 1000 V/ s *3 Led Trigger LTV COUPLED Current, Current Required t Latch Output, Either LTV I FT LTV ma Main Terminal Vltage = 3V Directin LTV Hlding Current, Either Directin I H 400 A ZERO CROSSING Inhibit Vltage V INH 5 20 Vlts Leakage in Inhibited State I DRM2 500 A IF=Rated I FT, MT1-MT2 Vltage abve which device will nt trigger IF = Rated I FT, Rated V DRM, Off State *1 Test vltage must be applied within dv/dt rating. *2 This is static dv/dt. Cmmutating dv/dt is a functin f the lad-driving thyristr(s) nly. *3 All devices are guaranteed t trigger at an I F value less than r equal t max I FT. 5/11 Part N.:

7 5. CHARACTERISTICS CURVES (TYPICAL PERFORMANCE) Phtcupler Fig.1 Frw ard C urrent vs. Am bient Tem perature Fig.2 O n-state C urrent vs. A m bient Tem perature 60 Frward current I (ma) F I TM, n-state current (A) Ambient temperature Ta ( C) Ambient temperature Ta ( C) Fig.3 M inim um Trigger C urrent On-state vltage VT (V) Minimum trigger current IFT (ma) vs. Am bient Tem perature Fig.5 O n-state V ltage vs. A m bient Tem perature VP= 6V RL= Ambient temperature ( C) IT= 100mA 100 Fig.4 Frw ard C urrent vs. Frw ard Frward current IF (ma) Fig.6 H lding C urrent vs. Hlding current IH (ma) V ltage Frward vltage VF (V) Am bient Tem perature C 100 C C 40 C 20 C VP= 6V Ambient temperature Ta ( C) Ambient Temperature Ta ( C) 6/11 Part N.:

8 Phtcupler 7/11 Part N.:

9 Tem perature ( C ) 6. TEMPERATURE PROFILE OF SOLDERING 6.1 IR Reflw sldering (JEDEC-STD-020C cmpliant) Phtcupler One time sldering reflw is recmmended within the cnditin f temperature and time prfile shwn belw. D nt slder mre than three times. Prfile item Cnditins Preheat - Temperature Min (T Smin) - Temperature Max (T Smax) - Time (min t max) (ts) 150 C 200 C 90±30 sec Sldering zne - Temperature (T L) - Time (t L) Peak Temperature (T P) Ramp-up rate Ramp-dwn rate 217 C 60 sec 260 C 3 C / sec max. 3~6 C / sec 20 sec R am p-up TP 260 C TL 217 C Tsm ax 200 C R am p-dw n Tsm in 150 C 60 sec tl (S ldering) 25 C 60 ~ 120 sec ts (P reheat) 35~70 sec Tim e (sec) 8/11 Part N.:

10 6.2 Wave sldering (JEDEC22A111 cmpliant) One time sldering is recmmended within the cnditin f temperature. Phtcupler Temperature: 260+0/-5 C Time: 10 sec. Preheat temperature:25 t 140 C Preheat time: 30 t 80 sec. 6.3 Hand sldering by sldering irn Allw single lead sldering in every single prcess. One time sldering is recmmended. Temperature: 380+0/-5 C Time: 3 sec max. 9/11 Part N.:

11 7. RRECOMMENDED FOOT PRINT PATTERNS (MOUNT PAD) Phtcupler Unit: mm /11 Part N.:

12 Phtcupler 8. NAMING RULE LTV-308(X)(1) DEVICE PART NUMBER Please refer t Electrical Optical Characteristics Table n Page P5 (1) TAPING TYPE (TP r n suffix) Example : LTV-3081-TP1 LTV308(X)(1)-V DEVICE PART NUMBER Please refer t Electrical Optical Characteristics Table n Page P5 (1) TAPING TYPE (TP r n suffix) (2) VDE ptin Example : LTV3081TP1-V 9. NOTES LiteOn is cntinually imprving the quality, reliability, functin r design and LiteOn reserves the right t make changes withut further ntices. The prducts shwn in this publicatin are designed fr the general use in electrnic applicatins such as ffice autmatin equipment, cmmunicatins devices, audi/visual equipment, electrical applicatin and instrumentatin. Fr equipment/devices where high reliability r safety is required, such as space applicatins, nuclear pwer cntrl equipment, medical equipment, etc, please cntact ur sales representatives. When requiring a device fr any specific applicatin, please cntact ur sales in advice. If there are any questins abut the cntents f this publicatin, please cntact us at yur cnvenience. The cntents described herein are subject t change withut prir ntice. Immerge unit s bdy in slder paste is nt recmmended. 11/11 Part N.:

Photocoupler Product Data Sheet LTV-725V (M, S, S-TA, S-TA1) series Spec No.: DS Effective Date: 07/22/2016 LITE-ON DCC RELEASE

Photocoupler Product Data Sheet LTV-725V (M, S, S-TA, S-TA1) series Spec No.: DS Effective Date: 07/22/2016 LITE-ON DCC RELEASE Prduct Data Sheet LTV-725V (M, S, S-TA, S-TA1) Spec N.: DS-70-99-0015 Effective Date: 07/22/2016 Revisin: C LITE-ON DCC RELEASE BNS-OD-FC001/A4 LITE-ON Technlgy Crp. / Optelectrnics N.90,Chien 1 Rad, Chung