LOW ESR Cap. Compatible Positive Voltage Regulators XC6206 Series

Transcription

1 SOT-23 Unit: mm Features Maximum Output Current : 200mA Dropout Voltage : 250mV (IOUT = 100mA) Maximum Operating Voltage : 6V Output Voltage Range : 1.2V ~ 5V (0.1V increments) Highly Accurate : ±2%@VOUT 1.5V : ±30mV@VOUT<1.5V : ±1%@VOUT 2V Low Power Consumption : TYP 1μA Low ESR Capacitor Compatible VSS 2.Vout 3.Vin Absolute Maximum Ratings Ta = 25 Parameter Symbol Rating Unit Input Voltage VIN -0.3~7 V Output Voltage VOUT -0.3~VIN+0.3 Output IOUT Pd / (VIN-VOUT) IOUT 500 ma Power Dissipation 250 Pd (Note.1) 500 (PCB mounted) mw Junction Temperature TJ 125 Operational Ambient Temperature Topr -40 to 85 Storage Temperature range Tstg -55 to 125 Note.1:This power dissipation figure shown is PCB mounted and is for reference only. Please refer to page 15~17 for details. 1

2 Electrical Characteristics Ta = 25 Parameter Symbol Test Conditions Min Typ Max Unit Output Voltage (Note.1) VOUT(T)<1.5V,IOUT=30mA VOUT(T) 1.5V,IOUT=30mA X0.98 X1.02 Output Voltage (High Accuracy) VOUT(T) 2V,IOUT=30mA X0.99 X1.01 Supply Current I DD 1 3 ua Load Regulation VOUT VOUT(T) 1.8V,1mA IOUT 50mA VOUT(T)>1.8V,1mA IOUT 100mA E-1 mv Vdif1 IOUT=30mA E-2 Dropout Voltage VOUT(E) VOUT(T) 1.8V,IOUT=60mA VOUT(T)>1.8V,IOUT=100mA V OUT(T) Vdif2 E-3 V mv Line Regulation VOUT ( Ta* VOUT) V OUT(T) <4.5V, V OUT(T) +1.0V V IN 6.0V, I OUT =30mA V OUT(T) 4.5V, 5.5V V IN 6.0V, I OUT =30mA %/V Maximum Output Current I OUT VOUT VOUT(E) 0.9 E-4 ma Short Circuit Current Ishort VOUT=VSS E-5 Input Voltage VIN V Output Voltage Temperature Characteristics VOUT ( Ta* VOUT) IOUT=30mA -40 Ta 85 ±100 ppm/ Note.1:(Standard):±2% (1.5V VOUT(T)), ±0.03V (1.5V>VOUT(T)) (High Accuracy):±1% (2.0V VOUT(T)) Note : Unless otherwise stated, VIN = VOUT(T) + 1.0V VOUT(E) :Effective output voltage VOUT(T) :Nominal voltage Ordering Information XC6206P - Designator Item Symbol description 12 Output Voltage e.g. V OUT : 3.0V 1=3, 2= (Note.1) Accuracy Packages (Order Unit) 2 + 2% (V OUT 1.5V), +30mV (V OUT <1.5V) 1 +1% (V OUT 2.0V) MR : SOT-23 (3,000/Reel) MR-G : SOT-23 (3,000/Reel) Note.1: The -G suffix denotes Halogen and Antimony free as well as being fully EU RoHS compliant. 2

3 Electrical Characteristics Ta = 25 NOMINAL VOLTAGE E-1 E-2 E-3 E-4 E-5 LOAD REGULATION DROPOUT VOLTAGE1 DROPOUT VOLTAGE2 MAX. OUTPUT CURRENT SHORT CURRENT V OUT (mv) V dif1 (mv) V dif2 (mv) I OUTMAX (ma) I SHORT (ma) V OUT(T) MAX. TYP. MAX. TYP. MAX. MIN. TYP

4 Marking Information represents product number Mark 6 2 represents 3 pins regulator Mark Voltage =0.1 ~ 3.0V Voltage=3.1 ~ 6.0V 5 6 Product Series XC6206P***** Product Series XC6206P***** 3 represents output voltage Mark Voltage (V) Mark Output Voltage (V) F H K L M N P R S T A U B V C X D Y E Z represents production lot number 0 to 9, A to Z, and inverted 0 to 9, A to Z repeated. (G, I, J, O, Q, W excepted.) 4

5 Typical Application Circuit Block Diagram 5

6 Test Circuits Circuit 1 Circuit 2 6

7 Typical Characterisitics 7

8 Typical Characterisitics. 8

9 Typical Characterisitics. 9

10 Typical Characterisitics 10

11 Typical Characterisitics 11

12 Typical Characterisitics 12

13 SOT-23 Power Dissipation Power dissipation data for the SOT-23 is shown in this page. The value of power dissipation varies with the mount board conditions. Please use this data as one of reference data taken in the described condition. 1. Measurement Condition (Reference data) Condition: Mount on a board Ambient: Natural convection Soldering: Lead (Pb) free Board: Dimensions 40 x 40 mm (1600 mm 2 in one side) Copper (Cu) traces occupy 50% of the board area In top and back faces Package heat-sink is tied to the copper traces (Board of SOT-26 is used.) Material: Glass Epoxy (FR-4) Thickness: 1.6 mm Through-hole: 4 x 0.8 Diameter 2. Power Dissipation vs. Ambient temperature 評価基板レイアウト Evaluation Board (Unit: mm) ( 単位 :mm) Board Mount (Tj max = 125 ) Ambient Temperature( ) Power Dissipation Pd(mW) Thermal Resistance ( /W) Pd vs. Ta Power Dissipation Pd (mw) Ambient Temperature Ta ( ) 13