ZWS50B EVALUATION DATA 型式データ

Size: px

Start display at page:

Download "ZWS50B EVALUATION DATA 型式データ"

Randolph Wheeler
5 years ago
Views:

1 EALUATION DATA 型式データ TDK-Lambda A A

2 INDEX 1. 測定方法 Evaluation Method PAGE 1.1 測定回路 Circuit used for determination 測定回路 1 Circuit 1 used for determination... T-1 静特性 Steady state data 過電流保護特性 Over current protection (OCP) characteristics 過電圧保護特性 Over voltage protection (OP) characteristics 出力立ち上がり特性 Output rise characteristics 出力立ち下がり特性 Output fall characteristics 出力保持時間特性 Hold up time characteristics 測定回路 2 Circuit 2 used for determination... T-1 過渡応答 ( 負荷急変 ) 特性 Dynamic load response characteristics 測定回路 3 Circuit 3 used for determination... T-1 入力サージ電流 ( 突入電流 ) 波形 Inrush current waveform 測定回路 4 Circuit 4 used for determination... T-2 リーク電流特性 Leakage current characteristics 測定回路 5 Circuit 5 used for determination... T-2 出力リップルノイズ波形 Output ripple and noise waveform 測定構成 Configuration used for determination... T-2 EMI 特性 Electro-Magnetic Interference characteristics (a) 雑音端子電圧 ( 帰還ノイズ ) Conducted Emission (b) 雑音電界強度 ( 放射ノイズ ) Radiated Emission 1.2 使用測定機器 List of equipment used... T-3 2. 特性データ Characteristics 2.1 静特性 Steady state data (1) 入力負荷温度変動 / 起動電圧遮断電圧 Regulation - line and load, Temperature drift / Start up voltage and Drop out voltage... T-4 (2) 効率対出力電流 Efficiency vs. Output current... T-5 (3) 入力電流対出力電流 Input current vs. Output current... T-6 (4) 入力電力対出力電流 Input power vs. Output current... T 過電流保護特性 Over current protection (OCP) characteristics... T 過電圧保護特性 Over voltage protection (OP) characteristics... T 出力立ち上がり特性 Output rise characteristics.... T 出力立ち下がり特性 Output fall characteristics... T 出力保持時間特性 Hold up time characteristics... T 過渡応答 ( 負荷急変 ) 特性 Dynamic load response characteristics... T 入力電圧瞬停特性 Response to brown out characteristics... T-13~ 入力サージ電流 ( 突入電流 ) 波形 Inrush current waveform... T リーク電流特性 Leakage current characteristics... T 出力リップルノイズ波形 Output ripple and noise waveform... T EMI 特性 Electro-Magnetic Interference characteristics... T-18~21 使用記号 Terminology used 定義 Definition in... 入力電圧 Input voltage out... 出力電圧 Output voltage Iin... 入力電流 Input current Iout... 出力電流 Output current Ta... 周囲温度 Ambient temperature f... 周波数 Frequency TDK-Lambda

3 1. 測定方法 Evaluation Method 1.1 測定回路 Circuit used for determination 測定回路 1 Circuit 1 used for determination 静特性 Steady state data 過電流保護特性 Over current protection (OCP) characteristics 過電圧保護特性 Over voltage protection (OP) characteristics 出力立ち上がり特性 Output rise characteristics 出力立ち下がり特性 Output fall characteristics 出力保持時間特性 Hold up time characteristics Digital power meter SW1 A W + Power supply P.S. Load - Shunt res. Controlled temp. chamber 測定回路 2 Circuit 2 used for determination 過渡応答 ( 負荷急変 ) 特性 Dynamic load response characteristics Digital power meter Power supply SW 1 A W P.S. + Load Load Dynamic dummy load Shunt res. Output current waveform 100% 95% tr tf 55% 50% Min 測定回路 3 Circuit 3 used for determination 入力サージ電流 ( 突入電流 ) 波形 Inrush current waveform Digital power meter Slide reg. A W + Dynamic dip simulator P.S. Load Current probe - Shunt res. TDK-Lambda T-1

4 測定回路 4 Circuit 4 used for determination リーク電流特性 Leakage current characteristics Digital power meter A W + Power supply Isolation trans Leakage current meter P.S. Load - Shunt res. 測定回路 5 Circuit 5 used for determination 出力リップルノイズ波形 Output ripple and noise waveform Digital power meter SW1 A W + 1.5m 50Ω Cable Power supply P.S. - C1 + C2 Load R C3 Oscilloscope Bandwidth : 100MHz 150mm R : 50Ω C1 : 0.1uF Film cap. C2 : 100uF Elect cap. C3 : 4700pF Ceramic cap. 測定構成 Configuration used for determination EMI 特性 Electro-Magnetic Interference characteristics (a) 雑音端子電圧 ( 帰還ノイズ ) Conducted Emission EMI Test receiver spectrum analyzer 擬似電源回路網 AMN 50Ω/50uH 供試機器 ( 接地 ) D.U.T.(Earthed) D=80cm アルミ板 Aluminum plate D=40cm 垂直基準大地面 (2m 2m) ertical ground reference plane 電源ケーブル Power cable 台 Stand H=80cm 接地 Earth 水平大地面 Horizontal ground plane 入力電源 Power source EMI Test receiver spectrum analyzer pre amp. (b) 雑音電界強度 ( 放射ノイズ ) アンテナ Antenna D=3m 電源ケーブル Power cable ターンテーブル Turn table Radiated Emission 供試機器 ( 接地 ) D.U.T.(Earthed) 台 Stand H=80cm アルミ板 Aluminum plate 接地 Earth 水平大地面 Horizontal ground plane 入力電源 Power source TDK-Lambda T-2

5 1.2 使用測定機器 List of equipment used EQUIPMENT USED MANUFTURER MODEL NO. 1 DIGITAL STORAGE OSCILLOSCOPE TEKTRONIX TDS220 2 DIGITAL STORAGE OSCILLOSCOPE YOKOGAWA ELECT. DL9040L 3 DIGITAL MULTIMETER AGILENT 34970A 4 DIGITAL POWER METER YOKOGAWA ELECT. WT210 5 CURRENT PROBE YOKOGAWA ELECT / DYNAMIC DUMMY LOAD TAKASAGO FK-200L 8 DUMMY LOAD PCN RHF250 SERIES 9 SLIDE REGULATOR MATSUNAGA S ISOLATION TRANS MATSUNAGA 3WTC-50K 11 CCF TAKASAGO AA2000XG 12 CCF NF ES10000S 13 LEAKAGE CURRENT METER HIOKI DYNAMIC DIP SIMULATOR TAKAMISAWA PSA CONTROLLED TEMP. CHAMBER ESPEC SU EMI TEST RECEIER / SPECTRUM ANALYZER ROHDE & SCHWARZ ESCI 17 PRE AMP. SONOMA 310N 18 AMN SCHWARZBECK NNLK ANTENNA SCHWARZBECK CBL6111D TDK-Lambda T-3

6 2. 特性データ Characteristics 2.1 静特性 Steady state data (1) 入力負荷温度変動 / 起動電圧遮断電圧 Regulation - line and load, Temperature drift / Start up voltage and Drop out voltage 5 1. Regulation - line and load Condition Iout \ in line regulation 0% m 0.020% 50% m 0.000% 100% m 0.020% load 5m 4m 4m 5m regulation 0.100% 0.080% 0.080% 0.100% 2. Temperature drift Conditions in : 100 Ta temperature stability out m 0.080% 3. Start up voltage and Drop out voltage Conditions Start up voltage (in) 74 Drop out voltage (in) Regulation - line and load Condition Iout \ in line regulation 0% m 0.008% 50% m 0.000% 100% m 0.000% load 2m 2m 3m 2m regulation 0.017% 0.017% 0.025% 0.017% 2. Temperature drift Conditions in : 100 Ta temperature stability out m 0.192% 3. Start up voltage and Drop out voltage Conditions Start up voltage (in) 73 Drop out voltage (in) Regulation - line and load Condition Iout \ in line regulation 0% m 0.004% 50% m 0.004% 100% m 0.004% load 4m 4m 3m 3m regulation 0.017% 0.017% 0.013% 0.013% 2. Temperature drift Conditions in : 100 Ta temperature stability out m 0.362% 3. Start up voltage and Drop out voltage Conditions Start up voltage (in) 73 Drop out voltage (in) 65 TDK-Lambda T-4

7 (2) 効率対出力電流 Efficiency vs. Output current Conditions in : 85 : 100 : 200 : Efficiency (%) Efficiency (%) Efficiency (%) TDK-Lambda T-5

8 (3) 入力電流対出力電流 Input current vs. Output current Conditions in : 85 : 100 : 200 : Iout : 0% in Input current A A A A Input current (A) Iout : 0% in Input current A A A A Input current (A) Input current (A) Iout : 0% in Input current A A A A 0.0 TDK-Lambda T-6

9 (4) 入力電力対出力電流 Input power vs. Output current Conditions in : 85 : 100 : 200 : Iout : 0% in Input power W W W W 12 Input power (W) Iout : 0% in Input power W W W W 24 Input power (W) Iout : 0% in Input power W W W W Input power (W) TDK-Lambda T-7

10 2.2 過電流保護特性 2.3 過電圧保護特性 Over current protection (OCP) characteristics Over voltage protection (OP) characteristics 5 Conditions in : 100 Conditions in : 100 Ta : -10 Iout : 0 % Output voltage () OP Point out /DI 1s/DI Output voltage () OP Point out /DI 5s/DI Output voltage () OP Point out /DI 20s/DI TDK-Lambda T-8

11 2.4 出力立ち上がり特性 Output rise characteristics Conditions in : 85 (A) 100 (B) 200 (C) 265 (D) 5 Iout : 0% Iout : 100% out 0 DC B A DC B A in 2/DI 200ms/DI 2/DI 200ms/DI 12 Iout : 0% Iout : 100% out 0 DC B A DC B A in 5/DI 200ms/DI 5/DI 200ms/DI 24 Iout : 0% Iout : 100% out 0 DC B A DC B A in 10/DI 200ms/DI 10/DI 200ms/DI TDK-Lambda T-9

12 2.5 出力立ち下がり特性 Output fall characteristics Conditions in : 85 (A) 100 (B) 200 (C) 265 (D) 5 Iout : 0% Iout : 100% A B C D AB C D out 0 in 2/DI 10s/DI 2/DI 50ms/DI 12 A BC D Iout : 0% Iout : 100% AB C D out 0 in 5/DI 20s/DI 5/DI 50ms/DI 24 AB C D Iout : 0% Iout : 100% AB C D out 0 in 10/DI 20s/DI 10/DI 50ms/DI TDK-Lambda T-10

13 2.6 出力保持時間特性 Hold up time characteristics Conditions in : Hold up time (ms) Hold up time (ms) Hold up time (ms) TDK-Lambda T-11

14 2.7 過渡応答 ( 負荷急変 ) 特性 Dynamic load response characteristics Conditions in : 100 Iout : 50 % 100 % (tr = tf = 50us) 5 f : 100Hz f : 1kHz out Iout Iout:0% 200m/DI 2ms/DI 200m/DI 200μs/DI +2.58% -2.28% +2.24% -2.07% 12 f : 100Hz f : 1kHz out Iout Iout:0% 200m/DI 2ms/DI 200m/DI 200μs/DI +1.38% -1.50% +1.53% -1.36% 24 f : 100Hz f : 1kHz out Iout Iout:0% 200m/DI 2ms/DI 200m/DI 200μs/DI +0.26% -0.30% +0.28% -0.27% TDK-Lambda T-12

15 2.8 入力電圧瞬停特性 Response to brown out characteristics 5 AB C Conditions in : 100 out A = 16ms B = 23ms C = 30ms 0 in 12 2/DI AB C 20ms/DI out A = 17ms B = 24ms C = 28ms 0 in 24 5/DI AB C 20ms/DI out A = 22ms B = 27ms C = 37ms 0 in 10/DI 20ms/DI TDK-Lambda T-13

16 2.8 入力電圧瞬停特性 Response to brown out characteristics 5 A BC Conditions in : 200 out A = 90ms B = 122ms C = 128ms 0 in 12 2/DI 50ms/DI A BC out A = 114ms B = 119ms C = 124ms 0 in 24 5/DI 50ms/DI A B C out A = 122ms B = 128ms C = 138ms 0 in 10/DI 50ms/DI TDK-Lambda T-14

17 2.9 入力サージ電流 ( 突入電流 ) 波形 Inrush current waveform 5 Switch on phase angle of input voltage φ = 0 Conditions in : 100 Switch on phase angle of input voltage φ = 90 Iin in 10A/DI 100ms/DI 10A/DI 100ms/DI Switch on phase angle of input voltage φ = 0 Conditions in : 200 Switch on phase angle of input voltage φ = 90 Iin in 20A/DI 100ms/DI 20A/DI 100ms/DI TDK-Lambda T-15

18 2.10 リーク電流特性 Leakage current characteristics Conditions Iout : 0 % 100 % Equipment used : 3156 (HIOKI) 5 f : 50 Hz Leakage current (ma) Input voltage () f : 60 Hz Leakage current (ma) Input voltage () TDK-Lambda T-16

19 2.11 出力リップルノイズ波形 Output ripple and noise waveform Conditions in : m/DI 2.5μs/DI 24 10m/DI 2.5μs/DI 5m/DI 2.5μs/DI TDK-Lambda T-17

2.12 EMI 特性 Electro-Magnetic Interference characteristics Conditions in : 230 雑音端子電圧 Conducted Emission 5 Point A (198kHz) Ref. Limit Measure Data (dbu) (dbu) QP 63.

5 Point C (198kHz) Ref. Limit Measure Data (dbu) (dbu) C D Phase : L CCI Class B QP Limit QP 63.7 53.6 A 53.7 44.7 Point D (297kHz) Ref.

20 2.12 EMI 特性 Electro-Magnetic Interference characteristics Conditions in : 230 雑音端子電圧 Conducted Emission 5 Point A (198kHz) Ref. Limit Measure Data (dbu) (dbu) QP A B Phase : N CCI Class B QP Limit A Point B (4.2MHz) Ref. Limit Measure Data (dbu) (dbu) CCI Class B A Limit QP A Point C (198kHz) Ref. Limit Measure Data (dbu) (dbu) C D Phase : L CCI Class B QP Limit QP A Point D (297kHz) Ref. Limit Measure Data (dbu) (dbu) Phase : L CCI Class B A Limit QP A EN55011-B,EN55032-B,FCC-B の限界値は CCI class B の限界値と同じ Limit of EN55011-B,EN55032-B,FCC-B are same as its CCI class B. TDK-Lambda T-18

2.12 EMI 特性 Electro-Magnetic Interference characteristics Conditions in : 230 雑音端子電圧 Conducted Emission 12 Point A (193kHz) Ref. Limit Measure Data (dbu) (dbu) A Phase : N CCI Class B QP Limit QP 63.

21 2.12 EMI 特性 Electro-Magnetic Interference characteristics Conditions in : 230 雑音端子電圧 Conducted Emission 12 Point A (193kHz) Ref. Limit Measure Data (dbu) (dbu) A Phase : N CCI Class B QP Limit QP A CCI Class B A Limit Point B (193kHz) Ref. Limit Measure Data (dbu) (dbu) B Phase : L CCI Class B QP Limit QP A Phase : L CCI Class B A Limit EN55011-B,EN55032-B,FCC-B の限界値は CCI class B の限界値と同じ Limit of EN55011-B,EN55032-B,FCC-B are same as its CCI class B. TDK-Lambda T-19

22 2.12 EMI 特性 Electro-Magnetic Interference characteristics Conditions in : 230 雑音端子電圧 Conducted Emission 24 Point A (11.8MHz) Ref. Limit Measure Data (dbu) (dbu) QP A Phase : N A CCI Class B QP Limit CCI Class B A Limit Point B (12.3MHz) Ref. Limit Measure Data (dbu) (dbu) QP A Phase : L B Phase : L CCI Class B QP Limit CCI Class B A Limit EN55011-B,EN55032-B,FCC-B の限界値は CCI class B の限界値と同じ Limit of EN55011-B,EN55032-B,FCC-B are same as its CCI class B. TDK-Lambda T-20

23 2.12 EMI 特性 Electro-Magnetic Interference characteristics Conditions in : 230 雑音電界強度 Radiated Emission 5 HORIZONTAL ERTICAL QP QP 12 HORIZONTAL ERTICAL QP QP 24 HORIZONTAL ERTICAL QP QP EN55011-B,EN55032-B の限界値は CCI class B の限界値と同じ Limit of EN55011-B,EN55032-B are same as its CCI class B. 表示はピーク値 Indication is peak values. TDK-Lambda T-21

TDK-Lambda A C 1/27

TDK-Lambda A C 1/27 RWS 50B-600B Series A262-53-01C 1/27 INDEX PAGE 1. Evaluation Method 1-1. 測定回路 Circuit used for determination 4 測定回路 1 Circuit 1 used for determination 静特性 Steady state data 通電ドリフト特性 Warm up voltage drift