Ultra Low Noise, Ultra Compact, Isolated type DC-DC Converter 1.5Watt BLA12 Series
|
|
- Georgiana Oliver
- 6 years ago
- Views:
Transcription
1 .Watt BL Series Our BL series isolated-type DC-DC converters feature a small package (4x0.x9.mm) and light weight (.g) capable of.w output. s ultralow noise and extremely high efficiency are made possible by a new circuit, it is ideal for an analog circuit as well as analog and digital hybrid circuit. Features - Ultra low noise - djustable Output oltage - ON/OFF Control - Dual power supply usable as single power supply - Withstand voltage C00 - Built-in Over Current Protection Circuit - No tantalum capacitor or electrolytic capacitor - Covered with a metal shield - Surface Mount Package - No heat sink needed - Operating Temp Range 40 C to +8 C (Temperature derating required) - RoHS Compliant Model/Rating Table Ripple Models Input Output Output I Line Reg. Reg. Noise Efficiency BL Series dc dc m m(max.) m(max.) mpp(typ.) %(typ.) BL-0S0 0 to to 8 () 0 to(00) BL-W0 ±(±) 0 to 0(0) Note : Output voltage in parentheses is when adj and out are short-circuited. Note : Output current in parentheses is at the maximum output voltage. Note : Ripple noise and efficiency are at input voltage and load rating. Note 4: Ripple noise is measured at 0MHz bandwidth, with a multi layered ceramic capacitor with 0μF at input and 0.μF at output. Specifications Table Input voltage range Refer to Table Rated output voltage.0±%, ±%, ±±% (When adj terminal is open) djustable output voltage range 4. to.0 (.0 model),.4 to ( model), ±.4 to ± (± model) Line regulation Refer to Table (Rated output, Input voltage varying in the range of Table ) regulation Refer to Table (Rated input/output, varying from 0 to 00%, ±output is upon balanced load) Temperature regulation 40m typ.(.0 model), 00m typ. ( model), 0m typ. (± model) (Rated input/output, for within ambient temperature range with 00% load at temperature derating) Ripple noise Refer to Table (Rated input/output, common temp, measurement frequency bandwidth 0MHz) Efficiency 8% to 8% typ. (Rated input/output, Common temp., Refer to Table ) Over current protection Operate at 0% or above of rated load current. uto restart type. Over voltage protection None Under oltage Lock Out Yes Input over current protection None Remote ON/OFF control Between Pin () and Pin (ON/OFF): Output is ON when open, output is OFF when short. Standby current m max. Withstand voltage Between input and output, input and case, output and case: One minute at C00. Insulation resistance Between input and output, input and case, output and case: 0MΩ or more (at DC00) Capacitance between P and S pprox. 80 to 40pF (depending on the model) Operating temp range Operating temperatures 40 C to +8 C (Refer to temp derating described separately) Storage temp range Storage temperatures -40 C to +8 C Humidity range 0 to 9%R.H. (Max. wet bulb temp C with no condensation) Storage conditions Below 0 C/0% R.H. before mounting the converter Cooling conditions Natural cooling (install in a well-ventilated place) ibration 0 to Hz Total amplitude.mmp-p (H for each of three directions) Sweep time min Impact cceleration 00G ( times for each of three directions, total 8 times) Duration ms Weight.g typ. Outer dimensions W=4 L=0. H=9. typ.(mm) (For dimensional details, refer to the shape and dimensions shown separately) The above specifications are provided with rated value, unless otherwise specified. The contents provided in this datasheet may be changed at any time without prior notice. BDD00
2 .Watt BL Series. Scope These specifications shall apply to the DC input, isolated type DC-DC converter BL series.. Model/Rating Model name BL-0S0 Rated input voltage Rated output Shape Remarks.0, 00m DC.0.0, m SMD BL-W0 ±, each 0m Unless otherwise mentioned in these specifications, input shall be rated input, output shall be rated output, and ambient temperature shall be C± C.. Environmental conditions - Temperature range In operation In storage - Humidity range In operation In storage 40 C to +8 C (Derating required) 40 C to +8 C 0 to 9%R.H. (However, max. wet bulb temperature C, no condensation) 0 to 9%R.H. (However, max. wet bulb temperature C, no condensation) Note) For storage before mounting, store in a place below 0 C and 0% R.H. BDD00
3 .Watt BL Series 4. Specifications & Standards This product is RoHS compliant. 4- Input conditions and output characteristics * Model name Input voltage Output voltage Output current m Output voltage stability * Input m max. m max. Temp. m typ. Output ripple noise * mp-p typ. / max. Efficiency *4 % typ. BL-0S0 9 to 8 ±% 0 to / 8 9 to 8 ±% 0 to / 8 BL-W0 9 to 8 ±±% 0 to / 8 * With the measurement circuit of 4-4. Unless otherwise mentioned, rated input and output, and ambient temperature shall be C± C. * Input: For fluctuations of input voltage = min. to max. : For fluctuations of output current = 0 to rated. Temperature: For fluctuations of ambient temperatures = -40 to Tamax. For within ambient temperature range with 00% load at temperature derating of 4-. two output product is when + output current and output current are equal. * Measured frequency bandwidth 0MHz. t both ends of external capacitor (C, or C4, C). *4 t rated input voltage and maximum output current. 4- Capacitance of external capacitor This product has a limited capacitance for an output external capacitors. Limit the capacitance of an external capacitor as follows: Output external capacitor Model name Capacitance Plus output side Minus output side BL-0S0 0 to 00μF * 0 to 4μF * BL-W0 0 to μf * 0 to μf * * Total of C and C in the Standard Connection Circuit of.() * Total of C and C4 in the Standard Connection Circuit of.() * Total of C and C in the Standard Connection Circuit of.() BDD00
4 .Watt BL Series 4- Temperature derating rate (%) 負荷率 (%) 00 自然空冷 Natural cooling mbient 周囲温度 temperature ( ) ( C) BL-0S0 BL-W0 Note) at rated output 4-4 Measurement circuit in + C ON/OFF SW Series adj C: 0μF( 積セラ (Multi-layered ) ceramic capacitor) +out SW C C: 0.μF( 積セラ (Multi-layered ) ceramic capacitor) SW Open = Output 出力 ON Short = Output 出力 OFF SW Open:out=, Short:out= in + ON/OFF C SW BL-W Series +out C4 C SW Open = Output 出力 ON Short = Output 出力 OFF SW4 Open: out = ± Short: out = ± adj 4 C: 0μF( (Multi-layered 積セラ ) ceramic capacitor) SW4 C4, C: 0.μF( (Multi-layered 積セラ ) ceramic capacitor) Coaxial 同軸ケーブル cable: : 0Ω,.m R: Ω C: 0.μF C R Oscilloscope オシロスコープ (Measurement ( リップルof ノイズの測定 ripple noise) ) 4 BDD00
5 .Watt BL Series 4- dditional functions Item Specifications & Standards Conditions Over current Operate at 0% or above, auto restart type. protection circuit Over voltage protection circuit None djustable output 4. to.0 (BL-0S0) By external resistor voltage range.4 to () Refer to - ±.4 to ± (BL-W0) ON/OFF control Open for output ON Low (0 to 0., 4m max.) for output OFF Refer to - 4- Withstand voltage and Insulation resistance ) Withstand voltage Between input and output, input and case, output and case: One minute at C00 ) Insulation resistance Between input and output, input and case, output and case: 0MΩ or more (at DC00). Outer dimensions and description of terminals - Shape and dimensions ピンマーク Pin mark 4.0±0. 9. max. 0.±0. Bellnix DC-DC CONERTER BL-0S0 Top iew 会社ロゴ Company logo 製品型名 Model name Lot No. 0. min. Pin Function BL-W in in ON/OFF ON/OFF 4 NC out out Com adj adj +out +out CL.8.8.±0. Side iew CL.8±0. 4. Bottom iew.4 Materials of terminals and case Terminal pin Material: Copper Plating: Gold plating after nickel plating Case Material: Nickel silver - Unit: mm - Dimensional tolerance (unless specified):±0. - Weight:.g typ. - Tolerance on terminals 0. mm max. (Max. lifting of the terminal part when placed on a plane) BDD00
6 .Watt BL Series - Recommended footprint dimensions.9 CL. CL Note) Recommended dimensions are shown above. Use your design standard for your specific design. - Lot indication 8 (Manufactured in ugust 0) (0 年 8 月製造 ) D (0 (Manufactured 年 月製造 in ) December 0) 製造管理密番 Production code ( 無表示の場合もあり for manufacturing control ) (may not be indicated) 製造月 Manufacturing (~9 月 month =~9 (Jan 0 to 月 Sep =O = to 月 9, =N Oct = O, 月 =D) Nov = N, Dec = D) 製造年 Manufacturing ( 西暦末尾 year (the 桁 ) last digit of.d.). Standard connection circuit - series Fuse +out C SW SW Open Open = Output = 出力 ON ON Short Short = Output = 出力 OFF OFF ON/OFF Series C adj C SW SW Open: out =, Short: out = C: 4.μF C: 4.μF C: 0.4μF - BL-W series Fuse C SW SW Open = Output = 出力 ON ON/OFF Short = Output = 出力 OFF BL-W Series 4 +out C C adj SW C4 C Common SW Open: out = ± Short: out = ± ± C: 4.μF C, C: 4.μF C4, C: 0.4μF Note) This product has no built-in fuse. lways connect a fuse to the line. llow enough capacity for power supply for a fuse to blow. BDD00
7 .Watt BL Series. arious functions - ON/OFF control The ON/OFF control function enables users to control ON/OFF of the output voltage without inputting or cutting it off. Between in terminal (No. pin) and ON/OFF terminal (No. pin) Open ( max.) : Output ON Short (0 to 0. 4m max.) : Output OFF ON/OFF or - Output over current protection If output current has reached over current status, output voltage is lowered and the over current protection circuit is activated. (Over current protection circuit actuating current: 0% or above of the rated load current) The converter automatically returns to normal operation as soon as over current status is resolved. Holding of over current status for over 0 seconds may result in damage, so resolve over current status within 0 seconds. lso, if the converter does not return to normal operation automatically even if the over current status has been resolved, turn off the power once or turn the output OFF with an ON/OFF control and reactivate. Characteristics in the over current mode Output oltage[%] Output Current[%] Note) The drooping characteristic may be seen in the over current protection characteristics as shown on the left. Note that output voltage may not come up upon the activation if connected to a nonlinear load such as a lamp, motor, etc., or a constant current load. BDD00
8 .Watt BL Series - Output voltage adjustment -- Short circuit adj and out terminal Output voltage can be set at the maximum as per the following table by short-circuiting adj and out terminals. In case of no variable output voltage, open the terminal. Output voltage for the connection of adj terminal Model name Between adj and out terminals Open Short BL-0S BL-W0 ±.0 ±.0 -- Resistor adjustment control You can also adjust output voltage by inserting a resistor between adj terminal and +out terminal or out terminal. To decrease the output voltage To increase the output voltage +out +out Rb adj adj Ra or 4 or 4 * pin: is pin, BL-W is 4 pin Model name BL-0S0 BL-W0 To decrease the output voltage Output voltage: o[], Connecting resistor: Rb[kΩ] o = (490 Rb + ) / (00 Rb + 00) Rb = ( 00 o) / (00 o 490) ariable range: o=4. min. o = (99 Rb + 4) / (0 Rb + 0) Rb = (4 0 o) / (0 o 99) ariable range: o=.4 min. o = (00 Rb + 00) / (440 Rb + 0) Rb = (00 0 o) / (440 o 00) ariable range: o=±.4 min. To increase the output voltage Output voltage: o[], Connecting resistor: Ra[kΩ] o = (490 Ra + ) / (00 Ra + 00) Ra = ( 00 o) / (00 o 490) ariable range: o=.0 max. o = (99 Ra + 4) / (0 Ra + ) Ra = (4 o) / (0 o 99) ariable range: o=.0 max. o = ( Ra + 9) / (0 Ra + 90) Ra = (9 90 o) / (0 o ) ariable range: o=±.0 max. Note) If output voltage is made variable, use at the maximum power (.W) or less. If output voltage is made lower, do not connect RB to resistor which less than o min setting resistor value. 8 BDD00
9 .Watt BL Series -4 ctivation and deactivation voltage This product has an under voltage lock out function to prevent malfunction when low input voltage. The activation voltage and deactivation voltage is within the range shown in the table below. mbient temperature Range of activation and deactivation voltage -40 to 8 C Protection against reverse connection of input power supply (example) This product will be damaged if erroneously connected with reverse input polarity. To cope with a possible reverse connection, add a protection circuit as shown in the following figure. The following is an example using a fuse and a diode. Fuse +out D C Series C C 9. Common mode noise reduction method (example) To reduce common mode noise of this product, connect a capacitor of 000pF or so (C4) between the primary and secondary terminals. In this case, note that using a capacitor of too much capacitance may result in the increase of coupling capacitance between primary and secondary terminals. Fuse +out D C Series C C C4 0. Input feedback noise reduction method (example) Input feedback noise can be reduced by designing a Pi filter at input side. dd as needed. Fuse L C C Series 9 BDD00
10 .Watt BL Series. Serial operation method (example) Serial operation is possible by wiring this product as per the following figure. Limit the output current not to exceed the smaller rated current of the power supplies connected in series to avoid more current than rating to run into the power supply. Fuse +out Series D Fuse +out Series D Note) This product is not suitable for parallel operation. Schottky diodes of low forward voltage are recommended for D and D.. Soldering conditions Observe the following conditions for soldering temperature and time. Flow mounting is not possible for this product. Reflow method Reflow temperature profile In the case of Sn-g-0.Cu series solder Parts surface 部品表面温度 temperature ( ) ( C) TP Ty Ty ' B B' C ' B B' C.0 ~.0 /s Ty: Ty: Ty ~ Ty:.0 ~ 4.0 /s TP: C 以上 or higher: :.0 ~.0 /s 0±0 0±0 40 ~ 00s 4 max. 0 ~ 40s Soldering time (s) 半田付け時間 (s) Refrain from causing vibration of the product during the reflow. The number of reflows shall be once (no mounting of the reverse side). * Eutectic solder may be used so far as within the above profile conditions.. ibration and impact tests ibration 0 to Hz Total amplitude.mmp-p (H for each of three directions) Sweep time minutes Impact cceleration 00G ( times for each of directions, total 8 times) Impact time ms 0 BDD00
11 .Watt BL Series 4. Cleaning This product is not for immersible cleaning. Use of no-clean flux is recommended.. Precautions for use To ensure user s safety, check specifications before using the product and always observe the following precautions for use. This product is intended for use in general electronics equipment (office equipment, communication equipment, measurement equipment). Do not use the product for medical equipment, nuclear equipment, trains, etc., whereby human life or property may be directly affected by damaged product. Consult with us for any use other than for such general electronics equipment. Minor changes and component parts changes that do not affect contents of the specifications will be made due to characteristic improvement of the product and other reasons without prior notice. This product is not suitable for parallel operation. Do not use connectors and sockets for mounting the product. Contact resistance may have an adverse effect on the performance. Use the soldering method for mounting on the printed circuit board. This equipment has a built-in over current protection circuit but avoid a prolonged short circuit which may lead to failure. This product may be damaged if used under nonstandard electrical conditions or nonstandard environmental conditions including temperature. Ensure use within the standards. void using this product in a place that generates corrosive gas or is dusty. This product may be damaged by static electricity. Make sure that the workplace is guarded against static buildup and static electricity on operators by use of proper grounding. fuse mechanism is not built in this product. Connect a fuse suitable in terms of blowout characteristics and I t characteristics to + input line to guard against excessive input current under abnormal circumstances. llow enough capacity in the power supply for a fuse to blow. This product has no built-in function for over voltage protection. This product does not come with a test report.. Warranty The warranty term of the product is one year after shipment. Should the product become defective within the warranty period due to our design or workmanship, the product will be repaired free of charge or replaced. However, this warranty does not cover products which have been subjected to unauthorized inner modifications, etc. The scope of our warranty is limited to that of the said product.. Contact If you have any further technical questions for this product, please contact us. info@bellnix.com URL: BDD00
Line regulation Refer to Table 1 (Rated output, Input voltage varying in the range of Table 1) Load regulation
Ultralow Noise, Ultracompact, Isolated type.watt BLA0 Overview Our BLA series isolated-type DC-DC converters feature a small package (4x0.x9.mm) and light weight (.g) capable of.w output. As ultralow noise
More informationTable 2 Models BST12L-0.7S10PDM BST12L-0.7S16PDM BST12L-0.7S25PDM Conditions Input voltage range
Information The BST2L series is a small, thin, highly efficient and low noise non-isolated type step down DC-DC converter with 2 input that has been developed for distributed feeding. Output voltage is
More informationContactless power supply module BWS Series
1. Application This specification applies to the contactless power supply module BWS0-28S1R. 2. Overview BWS0-28S1R is a module designed for power transmission using contactless power transfer technology.
More informationBSU-1.8S1R0. High-Efficiency μmodule Non-Isolated POL DC-DC Converter GENERAL DESCRIPTION: FEATURES: APPLICATIONS:
FEATURES: High Density Integration Module 1A Output Current 93% Peak Efficiency at 3.3VIN Input Voltage Range from 2.7V to 5.5V Output Voltage Range from 0.8V to 4.0V Enable Function Automatic Power Saving/PWM
More informationBSU12-3.3S3R0. High-Efficiency μmodule Non-Isolated POL DC-DC Converter GENERAL DESCRIPTION: FEATURES: APPLICATIONS:
FEATURES: High Density upol Module 3A Output Current 91% Peak Efficiency at 12VIN Input Voltage Range from 4.5V to 16V Output Voltage Range from 0.6V to 5.0V Enable / PGOOD Function Automatic Power Saving/PWM
More informationBSU12-3.3S1R0. High-Efficiency μmodule Non-Isolated POL DC-DC Converter GENERAL DESCRIPTION: FEATURES: APPLICATIONS:
FEATURES: High Density upol Module 1000mA Output Current 95% Peak Efficiency at 12VIN Input Voltage Range from 4.5V to 17V Output Voltage Range from 1.0V to 5.0V Enable / PGOOD Function Automatic Power
More information1000V, 1500V, 2000V VHV Series
Ultracompact, Adjustable Output High-Voltage Power Supply.5Watt Medium-High Voltage DC-DC Converter The series is our new line of medium-high voltage DC-DC converters featuring an ultracompact size with
More informationBSU-1.8S3R0. High-Efficiency μmodule Non-Isolated POL DC-DC Converter GENERAL DESCRIPTION: FEATURES: APPLICATIONS:
FEATURES: High Density upol Module 3A Output Current Input Voltage Range from 2.7V to 5.5V Output Voltage Range from 0.6V to 3.3V 95% Peak Efficiency at 5VIN Adjustable Output Voltage Enable / PGOOD Function
More informationAmerican Power Design, Inc.
FEATURES 4 Customer Selects Output Voltage 4 Outputs to 28 Vdc 4 Wide Input Ranges (10-20Vdc, 18-36Vdc, 20-60Vdc, 36-72Vdc) 4 Excellent Line & Load Regulation 4 Low Output Ripple 4 500 Vdc Output Isolation
More information15 W DC/DC CONVERTERS. SERIES DESCRIPTION Page. PC15WR 2:1 Input Range 2 2 x 1 Metal Can Package 2kv Isolation
15 W DC/DC CONVERTERS SERIES DESCRIPTION Page PC15WR 2:1 Input Range 2 2 x 1 Metal Can Package 2kv Isolation PC15WR4 4:1 Input Range 6 2 x 1 Metal Can Package 2kv Isolation CTC TECHNOLOGY CO.,LTD. DC /
More informationS24SE/S24DE series 30W Single/Dual Output DC/DC Converter
FEATURES Efficiency up to 89% Wide input range, 9V-36V Package with Industry Standard Pinout Package Dimension: 25.4 x25.4 x10.2mm (1.0 x1.0 x0.40 )(No HSK) Over voltage protection, hiccup mode Over current
More informationAmerican Power Design, Inc.
, Inc. FEATURES 4 Customer Selects Output Voltage 4 Ultra Wide Input Ranges (936Vdc, 2060Vdc) 4 Efficiency 89% (typ.) 4 Independently Isolated Outputs 4 SixSided Shielded Case 4 Remote On/Off Control 4
More informationDC/DC Converter 9 to 36Vdc and 18 to 75Vdc input voltage, 20 Watt Output Power; 3.3 to 15Vdc Single Output and ±12Vdc to ±15Vdc Dual Output
THN 20WI Series Application Note DC/DC Converter 9 to 36Vdc and 18 to 75Vdc input voltage, 20 Watt Output Power; 3.3 to 15Vdc Single Output and ±12Vdc to ±15Vdc Dual Output Pending Applications Wireless
More informationS24SE/S24DE series 15W Single/Dual Output DC/DC Converter
FEATURES Efficiency up to 89% Wide input range, 9V-36V Package with Industry Standard Pinout Package Dimension: 25.4 x25.4 x10.2mm (1.0 x1.0 x0.40 )(No HSK) Over voltage protection, hiccup mode Over current
More informationAmerican Power Design, Inc.
FEATURES 4 Customer Selects Output Voltage 4 Outputs to 1000 Vdc 4 Low Profile 4 Single and Dual Outputs 4 Ultra Wide Input Ranges (9-36Vdc, 20-60Vdc, 36-72Vdc) 4 1000 Vdc Output Isolation 4 Continuous
More informationUltra High Efficiency 94-96% High-Speed Response Step-Down DC-DC Converter BSV - m3,m6,m8
BSV-m3, m6, m8 is an ultra small size (15 24 4mm size) and light weight (2.6g) step-down DC-DC converter, which has achieved maximum 26W. Since it can correspond from ultra low output voltage of 1.0V,
More informationAmerican Power Design, Inc.
FEATURES 4 Customer Selects Output Voltage 4 Outputs to 1000 Vdc 4 Fully Programable Outputs 4 Single and Dual Outputs 4 Wide Input Ranges (10-20Vdc, 18-36Vdc) 4 1000 Vdc Output Isolation 4 Continuous
More informationEfficiency (typ.) (Range) Load. Output Current Input Current Reflected Ripple
FEATURES Highest Power Density 1" x 1" x 0.4" Shielded Metal Package Ultra Wide 4:1 Input Range Excellent Efficiency up to % Operating Temp. Range - C to + C Optional Heatsink I/O-isolation Voltage 10VDC
More informationFor more information, please visit the product page. input voltage 1 range. output voltage
date 9/12/218 page 1 of 1 SERIES: V78E--SMT DESCRIPTION: NON-ISOLATED DC SWITCHING REGULATOR FEATURES 1 A of output current efficiency up to SMT package industrial operating temp -~+ C designed to meet
More informationAmerican Power Design, Inc.
FEATURES 4 Customer Selects Output Voltage 4 Outputs to 28 Vdc 4 Wide Input Ranges (10-20Vdc, 18-36Vdc, 20-60Vdc, 36-72Vdc) 4 Excellent Line & Load Regulation 4 500 Vdc Output Isolation 4 Continuous Short
More informationA_(X)T-1W Series 1W, FIXED INPUT, ISOLATED & UNREGULATED DUAL OUTPUT DC-DC CONVERTER ULTRAMINIATURE SMD PACKAGE
A_(X)T-1W Series 1W, FIXED INPUT, ISOLATED & UNULATED DUAL OUTPUT - CONVERTER ULTRAMINIATURE SMD PACKAGE FEATURES Small Footprint SMD Package Efficiency up to 79% 1KV Isolation Operating Temperature Range:
More information(typ.) (Range) Parameter Model Min. Typ. Max. Unit
FEATURES Smallest Encapsulated 20W! Package Size 1.0 x1.0 x0.4 Ultra-wide 4:1 Input Range Very high Efficiency up to % Operating Temp. Range - C to +85 C Output Voltage Trimmable I/O-isolation Voltage
More informationS24SE/S24DE series 30W Single/Dual Output DC/DC Converter
Model List Model Number Input Voltage Output Voltage Output Current Input Current (typ input voltage) (Range) Max. Min. @Max. Load @No Load Load Regulation Maxcapacitive Efficiency Load (typ.) @Max. Load
More informationCCG Series Instruction Manual
Series Instruction Manual TDK Lambda BEFORE USING THE POWER SUPPLY Be sure to read this instruction manual thoroughly before using this product. Pay attention to all cautions and warnings before using
More information50W TO220 High Power Resistors
50W TO220 High Power Resistors MHP 50 Non-inductive, thin film technology. Thermally enhanced Industry standard TO220 package. RoHS compliant. Low thermal resistance, 2.3 C/W resistor hot spot to metal
More informationS24SP12004 series 40W Single Output DC/DC Converter
FEATURES Efficiency up to 92.8% Wide input range, 9V-36V Package with Industry Standard Pinout Package Dimension: Without heat sink 5.8 x25.4 x1.5mm (2. x1. x.41 ) With heat sink 5.8 x25.4 x17.5mm (2.
More informationS24SP05012 series 60W Single Output DC/DC Converter
Model List Model Number S24SP05012 Input Voltage (Range) Output Voltage Output Current Input Current (typ input voltage) Load Regulation Maxcapacitive Load (Cap ESR>=10mohm;Full Efficiency load;5%overshoot
More informationS24SP series 60W Single Output DC/DC Converter
Model List Model Number Input Voltage (Range) Output Voltage Output Current Input Current (typ input voltage) Load Regulation Maxcapacitive Load (Cap ESR>=1mohm;Full Efficiency (typ.) load;5%overshoot
More informationS24SP24003 series 60W Single Output DC/DC Converter
FEATURES Efficiency up to 93% Wide input range, 9V-36V Package with Industry Standard Pinout Package Dimension: Without heat sink 5.8 x25.4 x1.5mm (2. x1. x.41 ) With heat sink 5.8 x25.4 x17.5mm (2. x1.
More informationPXD30-xxWS-xx-Single Output DC/DC Converters
PXD30-xxWS-xx-Single Output DC/DC Converters 9 to 36 Vdc and 18 to 75 Vdc input, 1.5 to 15 Vdc Single Output, 30W Applications Wireless Network Telecom / Datacom Industry Control System Measurement Semiconductor
More informationAll specifications valid at normal input voltage, full load and +25 C after warm-up time unless otherwise stated.
KEY FEATURES Open Frame Switching Power Supply Remote ON/OFF Function 240 Watt with Free Air Convection 500 Watt with 30CFM FAN Built-in 12V/0.3A Auxiliary Output Standby 5V@1A with Fan, @0.4A without
More informationBR V, 1 A Non-Isolated Step Down DC/DC Converter Module BR300. Features and Benefits. Description. Applications: Typical Application Circuit
Features and Benefits Input voltage range 8 to 30 VDC Circuit topology: step-down chopper Switching frequency: 350 khz Output: 5 V, 1 A, 5 W Module footprint: 14 14 10 mm (W D H) Weight: 1.6 g All in one
More informationEfficiency (typ.) (Range) Max. Load VDC VDC ma ma ma(typ.) ma(typ.) μf % MJWI10-24S033
FEATURES Package Size 1.0 x1.0 x0.4 Ultrawide 4:1 Input Range High Efficiency up to 87% Operating Temp. Range 40 C to 80 C I/Oisolation Voltage 1500VDC Remote On/Off Control Input Filter complies to EN55022,Class
More informationAA SERIES (1 x 1 Package) Up to 10 Watt DC-DC Converter
FEATURES Industry standard footprint (1 inch X 1 inch) Regulated Outputs, Fixed Switching Frequency Up to 87 % Efficiency Low No Load Power Consumption Designed for use without tantalum capacitors -40
More informationPXD10-Single Output DC/DC Converter
PXD10-Single Output DC/DC Converter 9 to 18 Vdc, 18 to 36 Vdc and 36 to 75 Vdc input, 3.3 to 15 Vdc Single Output, 10W Features Single output current up to 2A 10 watts maximum output power 2:1 wide input
More informationOperation Manual. SWF Series Switch Mode Power Supply. SANKEN ELECTRIC CO., LTD No.PAN E-01.
Operation Manual SWF Series Switch Mode Power Supply 1 Table of Contents Safety Precautions 3 Appearance and Meaning of Safety Warnings 4 Hazard and Caution Safety Warnings 4 Introduction to SWF Series
More informationSeries AMSRL1-78JZ Up to 12 Watt DC-DC Switching Regulator
Click on Series name for product info on aimtec.com FEATURES: Picture Coming Soon Models Single output Model Input Voltage (V) Switching Regulator SMD Package Low Quiescent Current Efficiency Up To 95%
More informationDC-DC Converter DATA Sheet
DC-DC Converter DATA Sheet MYSSM00502EEPL 1 1. Features Wide input voltage range. (6.8V~13.2V) Single Output Voltage(Iout=2.0A) and Surface Mount Type of Non-insulated DC-DC Converter. Ultra small size
More informationSB_XT-1WR2 Series 1W, FIXED INPUT, ISOLATED & UNREGULATED SINGLE OUTPUT
www.schmid-m.com DC/DC Converter SB_XT-1WR2 Series 1W, FIXED INPUT, ISOLATED & UNREGULATED SINGLE OUTPUT FEATURES Miniature SMD package 1VDC isolation Operating temperature range: -4 ~+15 Internal SMD
More informationVFB400W - QXX - SXXX
date 01/30/2014 page 1 of 10 SERIES: VFB400W DESCRIPTION: DC-DC CONVERTER FETURES 400 W isolated output industry standard full brick package 4:1 input range (9~36, 18~75 ) single regulated outputs from
More informationAS SERIES (2.00 x 1.6 Package) Up to 20 Watt DC-DC Converter
PRODUCT OVERVIEW The AS series offer up to 20 watts of output power in standard 2.00 x 1.60 x 0.45 inches packages. This series features high efficiency and 1500 Volts of DC isolation. The AS series provides
More information200 WATT TH SERIES DC/DC CONVERTERS
Features 4:1 Input voltage range High power density Small size 2.4 x 2.28 x 0.65 Efficiency up to 90 Excellent thermal performance with metal case Pulse-by-pulse current limiting Over-temperature protection
More informationRT1- D3WR Series 1W, FIXED INPUT, ISOLATED & UNREGULATED SINGLE OUTPUT
RT1- D3WR Series 1W, FIXED INPUT, ISOLATED & UNREGULATED SINGLE OUTPUT FEATURES Miniature SMD package 3VDC isolation Operating temperature range: - ~+15 Efficiency up to 81% Internal SMD construction No
More informationTDK Lambda WC /24
WC33 53 1 1/24 INDEX PAGE 1. Evaluation Method 1.1 測定回路 Measurement Circuits 4 測定回路 1 Measurement Circuit 1 静特性 Steady state data 待機電力特性 Standby power characteristics 通電ドリフト特性 Warm up drift characteristics
More information(DOSA) VDC, 5.5 A.
Features Industry-standard pinout Output: 15 V at 5.5 A, 82.5W max. No minimum load required Low height - 0.374 (9.5mm) max. Basic Insulation Withstands 100 V input transients Fixed-frequency operation
More informationIF_S-1W & IF_D-1W Series 1W isolated DC-DC converter with Fixed Input Voltage and Regulated Single Output
IF_S-1W & IF_D-1W Series 1W isolated - converter with Fixed Input Voltage and Regulated Single Output FEATURES Compact size SIP/DIP Package I/O isolation test voltage 3k V Operating ambient temperature
More informationhttp://www.mmtmachrone.com 93D SERIES FEATURES: 60W DIL PACKAGE INDUSTRY STANDARD PACKAGE 2:1 WIDE INPUT RANGE 100% BURNED IN HIGH EFFICIENCY UL94V-0 PACKAGE MATERIAL CUSTOM SOLUTIONS AVAILABLE RoHS COMPLIANT
More informationAdvanced Monolithic Systems
Advanced Monolithic Systems 1A ERY LOW DROPOUT OLTAGE REGULATOR RoHS compliant FEATURES Adjustable or Fixed Output 1.5, 1.8, 2.5, 2.85, 3.0, 3.3, 3.5 and 5.0 Output Current of 1A Low Dropout, typ. 200m
More informationDC-DC Converter Specification MYGTC012R5BZN
DC-DC Converter Specification MYGTC012R5BZN MYGTC012R5BZN Specification 1 1. Application This specification applies to DC-DC Converter for amusement equipment, MYGTC012R5BZN. For any other application,
More informationInput Load (ma) Typ.
1. Features Wide 4 : 1 Input Range Low Ripple And Noise Input / Output Isolation 1.5K Vdc Or K Vdc 100% Burn-In Input - Filter Custom Design Available Net Weight: 12 g / g Typical RoHS Converter Certified
More informationCE-09 xx Non-insulation type DC-DC converter
CE-9 xx Non-insulation type DC-DC converter Features SMD type Short in height: 4.mm or 4.mm Equipped with variable output voltage (single output type only) Wide range of operating temperature conditions:
More informationSeries AM2L-NZ 2 Watt DC-DC Converter
FEATURES: Series AM2-NZ 2 Watt - Converter s Single output ow Profile SMD (Surface Mount Device) MTBF>1,000,000 hours 1000V & 6000V Isolation Operating temperature: -40 C to 85 C Industry Standard Pinout
More informationESB Series Embedded EMC Filter Up to 40W converter
Features High Ffficiency up to 91% 2:1 / 4:1 Ultra-Wide input range Compact size 1.6 x 1.0 x 0.4 & 1.6 x 1.0 x 0.5 Standard DOSA pin out; Fully replaceable with 2 x1 standard case Metal Case Six-Sided
More informationDC-DC Converter DATA Sheet
DC-DC Converter DATA Sheet MYSSM01204BENL MYSSM01204BENL DATA Sheet 1 1. Features Wide input voltage range. (17V~40V) Single Output Voltage/High Current(Iout=4.0A) and Surface Mount Type of Non-insulated
More informationABSOLUTE MAXIMUM RATINGS (Note 1) POWER Input oltage 7 Thermal Resistance CONTROL Input oltage 13 TO-220 package ϕ JA = 50 C/W Operating Junction Temp
Advanced Monolithic Systems FEATURES Adjustable or Fixed Output 1.5, 2.5, 2.85, 3.0, 3.3, 3.5 and 5.0 Output Current of 5A Low Dropout, 500m at 5A Output Current Fast Transient Response Remote Sense 5A
More informationSELECTION GUIDE. Nominal Input Voltage Output Voltage. Output Current
www.murata-ps.com SELECTION GUIDE Order Code Nominal Input Voltage Output Current Input Current at Rated Load Load Regulation (Typ) Load Regulation (Max) Ripple & Noise (Typ) 1 Ripple & Noise (Max) 1 Efficiency
More informationPRODUCT SPECIFICATION
0.8x1.2 mm Board to Board Socket Connectors Page 1 1.0 SCOPE This specifies 0.8x1.2mm pitch Socket Connectors. The connector shall meet the performances, specified here under the condition with the plug
More informationMEA1 Series 1kVDC Isolated 1W Dual Output DC-DC Converters
www.murata-ps.com FEATURES UL 695 recognised Typical efficiency to 89.5% 1kVDC isolation Hi Pot Test Wide temperature performance at full 1 Watt load, 4 C to 85 C Industry standard pinout Power sharing
More informationMIW3000 Series EMI. 5-6W, Wide Input Range DIP, Single & Dual Output DC/DC Converters MINMAX. Block Diagram. Key Features
-6W, Wide Input Range DIP, Single & DC/DC s Key Features Efficiency up to 10 Isolation MTBF > 1,000,000 Hours 2:1 Wide Input Range UL19 Safety Approval Complies with EN22 Class A Temperature Performance
More informationSPS20 Series small size isolated DC/DC converters
SPS20 Series small size isolated DC/DC converters Features High Efficiency Wide operating temperature range ( -20 C to +71 C ) Wide 2:1 input range Built in over current protection circuit Input Output
More informationPRODUCT OVERVIEW. APPLICATIONS: Distributed Power Architectures Mobile telecommunication Industrial applications Battery operated equipment
FEATURES Industry Standard 24-Pin DIP package 15Watts Isolated Output 4:1 Input Range Regulated Outputs Up to 90 % Efficiency Low No Load Power Consumption -40 C to +85 C industrial temperature range Negative
More informationDC-DC Converter Module
Features DC input range: 27-56 V Input surge withstand: 105 V for 100 ms DC output: 13.4 V Programmable output: 10 to 110% Regulation: ±0.2% no load to full load Efficiency: 88.5% Maximum operating temperature:
More informationECP225-A Series. 225 Watts. AC-DC Power Supplies. Models & Ratings
ECP225- Series C-DC Power Supplies 225 Watts Low Profile High Power Density 3 by 5.0 Footprint 50 W Convection/ 225 W Force Cooled Ratings 5 V Standby and 2 V Fan Outputs Medical and ITE pprovals High
More informationOutput Current Input Current Load Regulation
PB01S/D series 1W DC/DC CONVERTER, SIP-Package FEATURES Efficiency up to 1% SIP Package with Industry Standard Pinout Package Dimension: 5V&12V Models: 19.5 x 10.2 x 6.1 mm (0.77 x 0.4 x 0.24 ) 15V&24V
More informationPM24S/DR24S series 60W Single Output DC/DC Converter
FEATURES Efficiency up to 92% Wide input range, 9V-36V Package Dimension: Panel Mount: 100.0*56.0*19.0mm (3.94 * 2.20 *0.75 ) Din Rail: 118.6*67.1*23.5mm (4.67 *2.64 *0.93 ) Over voltage protection, hiccup
More information6x6 mm Thinner Type Tactile Switches (Pitch 4.5 mm) ACTUATOR COLOR & OPERATING FORCE: Black, 100gf Brown, 160gf Red, 260gf
TP6GM... TP6GMB... 2.5 TP6M... General Tolerance ±0.2mm How to order: TP6 1 2 3 5 6 7 1 GROUND TERMINAL: Blank Without Ground Terminal G With Ground Terminal 5 A K C ACTUATOR COLOR & OPERATING FORCE: Black,
More informationAll specifications valid at normal input voltage, full load and +25 C after warm-up time unless otherwise stated.
DPO-500 KEY FEATURES Open Frame Switching Power Supply Remote ON/OFF Function 240 Watt with Free Air Convection 500 Watt with 30CFM FAN Built-in 12V/0.3A Auxiliary Output Standby 5V@1A with Fan, @0.6A
More informationFor more information, please visit the product page If your application requires forced air, view our Dc Fans. output. output current max (ma)
date 12/08/2017 page 1 of 10 SERIES: PBO-1 DESCRIPTION: AC-DC POWER SUPPLY FEATURES up to 1 W continuous power ultra-compact SIP package available in straight-pin and bent-pin configurations wide input
More informationSPS20 Series small size isolated DC/DC converters
18 36Vdc Input, Maximum Power: 20W FEB 10, 2011 SPS20 Series small size isolated DC/DC converters Features High Efficiency Wide operating temperature range ( -20 C to +71 C ) Wide 2:1 input range Built
More informationAA SERIES (1 x 1 Package) Up to 30 Watt DC-DC Converter
FEATURES Industry standard footprint (1 inch X 1 inch) Regulated Outputs, Fixed Switching Frequency Up to 90 Efficiency Low No Load Power Consumption Designed for use without tantalum capacitors -40 C
More informationSELECTION GUIDE - SINGLE OUTPUT 1. Nominal Input Voltage Output Voltage
www.murata-ps.com MEV1 Series SELECTION GUIDE - SINGLE OUTPUT 1 Order Code Nominal Input Voltage Output Voltage Output Current Input Current at Rated Load Load Regulation (Typ) Load Regulation (Max) Ripple
More informationSELECTION GUIDE. Nominal Input Voltage Output Voltage. Output Current
www.murata-ps.com CRV2 Series SELECTION GUIDE Order Code Nominal Input Voltage Output Voltage Output Current Input Current at Rated Load Load Regulation (Typ) Load Regulation (Max) Ripple & Noise (Typ)
More informationPRODUCT SPECIFICATION
2.54mm Board to Board Socket Connectors Page 1 1.0 SCOPE This specifies 2.54mm pitch Socket Connectors. The connector shall meet the performances, specified here under the condition with the plug connector
More informationPRODUCT SPECIFICATION
2.54mm Board to Board Header Connectors Page 1 1.0 SCOPE This specifies Pitch 2.54mm Headers Connectors. The connector shall meet the performances, specified here under the condition with the plug connector
More informationDistributing Tomorrow s Technologies For Today s Designs Toll-Free:
2W, Wide Input Range DIP, Single & DC/DC s Key Features Efficiency up to 81 Isolation MTBF > 1,000,000 Hours 2:1 Wide Input Range CSA1 Safety Approval Low Ripple and Noise Short Circuit Protection Complies
More informationDescription. Table 1. Device summary. Order codes. SOT23-5L Marking SOT323-5L Marking DFN8 (3x3 mm) Marking
High input voltage, 85 ma LDO linear regulator Applications Datasheet - production data Mobile phones Personal digital assistant (PDAs) SOT23-5L DFN8 (3x3 mm) Cordless phones and similar battery-powered
More informationHRS50 Series 50W isolated DC/DC converters
HRS50 Series 50W isolated DC/DC converters Features High Efficiency Wide operating temperature range ( -40 C to +85 C ) Wide 2:1 input range Standard half brick size Six side shield Input Output Isolated
More informationDSA150 Series. xxx Series. 150 Watts. AC-DC Power Supplies. Models & Ratings. Mechanical Details 3.92 (99.8) 2.18 (55.5) 4.92 (125.
15 Watts xxx Series Ultra Slim Design 15% Peak Load for 3 seconds Ambient Operation from -1 C to +7 C High Efficiency Selectable Overload Characteristic Selectable Remote Inhibit or Enable 3 Year Warranty
More informationH_S-1W & G_S-1W Series 1W, FIXED INPUT, ISOLATED & UNREGULATED SINGLE / DUAL OUTPUT
H_S-1W & G_S-1W Series 1W, FIXED INPUT, ISOATED & UNREGUATED SINGE / DUA OUTPUT FEATURES SIP package V isolation Operating temperature range: -4 ~+15 Efficiency up to % Internal SMD construction No external
More informationFeatures. Power Module. 2 Amp Single Output RBB RBB DC/DC Converter
Features Power Module 1W buck/boost converter with up to 4A output Input voltage can be higher, lower or same as output voltage >9% efficiency from 1mA 3mA load 7µA standby power consumption Low profile,
More informationAsia-Pacific North America Europe, Middle East Bel Power Solutions, Inc. BCD.
The MPU200/MDU200 Series is based upon the proven architecture of the MPU150/MDU150 product line. The MPU products incorporate Power Factor Correction (PFC) with a low-profile package designed to meet
More informationhttp://www.mmtmachrone.com 96D SERIES FEATURES: 30W DIL PACKAGE Recognized By UL 60950-1 2:1 WIDE INPUT RANGE 100% BURNED IN HIGH EFFICIENCY UL 94V-0 PACKAGE MATERIAL CUSTOMIZED SOLUTIONS AVAILABLE RoHS
More informationBasic Characteristics Data
Basic Characteristics Data Basic Characteristics Data Model Circuit method Switching frequency [khz] Input current *1 [A] Inrush current protection PCB/Pattern Material Single sided Double sided Series/Parallel
More informationMTC1 Series Isolated 1W SM 2:1 Input Single Output DC-DC Converters
MTC1 Series SELECTION GUIDE FEATURES UL 95 recognised for reinforced insulation ANSI/AAMI ES1-1, 1 MOPP/ 2 MOOPs recognised 3kVAC isolation test voltage Hi Pot Test Continuous short circuit protection
More information9 to 36 Vdc and 18 to 75 Vdc input, 3.3 to 15 Vdc Single Output, 40W. Features
PXF40xxWSxx Single Output DC/DC Converter 9 to 36 Vdc and 18 to 75 Vdc input, 3.3 to 15 Vdc Single Output, 40W Features Single output current up to 10A 40 watts maximum output power 4:1 ultra wide input
More informationSFX Form Factor SST-SX650-G SST-SX500-G. The standard SFX power supply benchmark
SFX Form Factor SST-SX650-G SST-SX500-G The standard SFX power supply benchmark Support standard SFX form factor Silent running 92mm fan with 18 dba minimum All Japanese capacitors High efficiency with
More informationDistributing Tomorrow s Technologies For Today s Designs Toll-Free:
3W, Wide Input Range DIP, Single & DC/DC s Key Features Efficiency up to 82 Isolation MTBF > 1,000,000 Hours 2:1 Wide Input Range Low Cost Complies with EN022 Class A Temperature Performance -2 to +71
More informationPSU s e r i es
000W Single Output Power Supply PSU48-000-0 s e r i es SPECIFICATION MODEL OUTPUT INPUT PROTECTION FUNCTION ENVIRONMENT SAFETY & EMC (Note 4) OTHERS NOTE DC VOLTAGE RATED CURRENT CURRENT RANGE RATED POWER
More informationRipple & Max. capacitive Output Current
0 Watts xxx Series Wide 4: Input Range Single Output Industry Standard /4 Brick -40 C to +0 C Operation 0 VDC Isolation Output Trim ±0% Remote On/Off Year Warranty Dimensions: QSC0:. x.4 x 0. (.9 x. x.
More informationInput Load (ma) Typ. Output Ripple (mv) Max.
1 Watt SMD O/P DC-DC Converter 1. Features Low Ripple and Noise High Efficiency Up To 83% Input / Output Isolation : 1K Vdc or 3K Vdc 100% Burn-In Input Filter With Internal Capacitor Custom Design Available
More informationSeries AM20EW-Z 20 Watt DC-DC Converter
Click on Series name for product info on aimtec.com Models Single output Model FEATURES: Input Voltage RoHS Compliant Soft start Ultra wide 4:1 Input range Industrial temperature range -40 to +85 C Adjustable
More informationVXR S SERIES 1.0 DESCRIPTION 1.1 FEATURES 1.2 COMPLIANCE 1.3 PACKAGING 1.4 SIMILAR PRODUCTS AND ACCESSORIES
VXR15-2800S SERIES HIGH RELIABILITY COTS DC-DC CONVERTERS Models Available Input: 9 V to 60 V continuous, 6 V to 100 V transient 15 W, single output of 3.3 V, 5 V, 12 V, 15 V -55 C to 105 C Operation 1.0
More informationFeatures. Regulated Converter. 5 Watt DIP24 Single Output. Rxx-B R - B. DC/DC Converter
Features Regulated Converter High output voltage DIP24 converter Adjustable output voltage up to VDC Cascadable for output voltages up to VDC 3kVDC input/output isolation Remote voltage programming by
More informationDC/DC Converter K78_T-500R3 Series
Wide input voltage Non-isolated and Regulated Single Output RoHS FEATURES High efficiency up to 95% No-load input current as low as 0.2mA Operating ambient temperature range -40 to +85 Output short-circuit
More informationAC-DC ITE & Medical Switching Power Supply
KEY FEATURES U Bracket Medical Switching Power Supply Remote ON/OFF Function 200 Watt with Free Air Convection 500 Watt with 30CFM FAN Built-in 12V/0.3A Auxiliary Standby 5V@1A with Fan, @0.4A without
More information1. Output Power vs. Ambient temperature a. 3.3 and 5 V models b. All other models. Load factor Convection
VPU-S Series Switching Power Supply / Rev. 3-6 Features Universal input 8~64 Vac or ~34 Vdc Power factor correction Output over-current protected Output over-voltage protected Remote sense Remote on/off
More informationSeries AM30EW-Z 30 Watt DC-DC Converter
EATURES: Models Single output Model Input Voltage Ultra Wide 4:1 input range Remote on/off control Efficiency up to 91% Input/ Isolation 1600VDC Soft start Operating temperature -40ºC to + 75ºC Continuous
More informationVT-802 VT-802. Temperature Compensated Crystal Oscillator. Description
T-802 Temperature Compensated Crystal Oscillator T-802 Description ectron s T-802 Temperature Compensated Crystal Oscillator (TCXO) is a quartz stabilized, CMOS output, analog temperature compensated oscillator,
More informationOutput Current Load ±5 ±100 ± ±5 ±100 ± Item Test Conditions Min. Typ. Max. Unit
DAZ_XT1P Series 1W,FIXED INPUT, ISOLATED & UNULATED DUAL OUTPUT PART NUMBER SYSTEM DAZ-5-XT1P Rated Power Package Output Voltage Input Voltage Product Series FEATURES Ultra-Miniature SMD package 1VDC isolation
More informationAC/DC Power Supply Series APPLICATION NOTE
ZMS100 AC/DC Power Supply Series APPLICATION NOTE ZMS100 Application Notes Issue 3 Document Number 260160 Page 1 of 15 Contents Contents... 2 1. INPUT... 3 AC INPUT LINE REQUIREMENTS... 3 2. DC OUTPUT...
More information