BILANCIO ELETTRICO. Document Number 100PFP-00-ELE-EL CLIENT GAS PLUS STORAGE. Rev. Date POGGIOFIORITO GAS FIELD V00 PLANT V
|
|
|
- Frederica Hill
- 5 years ago
- Views:
Transcription
1 LENT GA PLU TOAGE PFP--ELE-EL- LOATON POGGOFOTO GA FELD ev. V -- GA TOAGE heet of BLANO ELETTO V -- ev. Description ompiled hecked Approval lient's Approval PFP--ELE-EL-_V_Bilancio elettrico.xls
2 LENT GA PLU TOAGE PFP--ELE-EL- LOATON POGGOFOTO GA FELD ev. V -- GA TOAGE heet of ELETAL UE LT EVON NDEX HEET N OVE DENOMNATON EV. HEET N DENOMNATON EV. NDEX NTUTON FO UE OF THE FOM ELETAL UE LT ELETAL UE LT ELETAL UE LT ELETAL UE LT ELETAL UE LT ELETAL UE LT ELETAL UE LT ELETAL UE LT ELETAL UE LT ELETAL UE LT ELETAL UE LT ELETAL UE LT ELETAL UE LT ELETAL UE LT ABOBED POWE UMMAY PFP--ELE-EL-_V_Bilancio elettrico.xls
3 LENT LOATON GA PLU TOAGE POGGOFOTO GA FELD GA TOAGE PFP--ELE-EL- ev. V -- heet of ELETAL UE LT NTUTON FO UE OF THE FOM ) TAG :dentification code in the plant (user). ) TYPE :Type of construction (centrifugal pump, local panel). ) EVE :Function of the driven machine in the plant (.e. hydraulic pump heater). ) DUTY TYPE :ontinuous :Discontinuous, referred to machines having a discontinuous and casual running or intermittent duty, having a running shutdown cycle provided for in the normal plant operation. ) DUTY OPEATNG :unning ONDTON :tand - by ) ELET N :Normal upply, without automatic reacceleration. UPPLY /...sec :The automatic reacceleration shall be foreseen in case of loss of power within the specified time in seconds. /...sec :The automatic reacceleration shall be foreseen in case of loss of power of safety reasons within the specified in seconds. ) ONTOL K :Local, near the user. :emote control A :Process controlled B :Block and / or interlockings are foreseen. ) EVE OF VOLTAGE V-A.. :Medium voltage feeder V-A.. :Motor and power low voltage feeder V-A.. :Normal lighting and auxiliary feeder ) EQUED POWE KWU :Operating brake power. ) PNP :Maximum brake power. ) PN :Minimum rated power of the motor, including safety factors. ) OUPLNG D :Direct coupling. :oupling with reduction gear. :oupling with bells. ) PM :otor speed for any type of coupling. ) NTALLED ATED POWE :Kw ) EVE N :Normal E :Essential :Emergency VT :Vital ) MV ATED POWE :Kw ) LV ATED POWE - NOMAL :Kw ) LV ATED POWE - EGENY :Kw FLE : PFP--ELE-EL-_V_Bilancio elettrico.xls
4 LENT LOATON GA PLU TOAGE POGGOFOTO GA FELD GA TOAGE PFP--ELE-EL- ev. V // heet of ELETAL UE LT DVEN MAHNE O OTHE UE DATA MEHANAL DEPT. ELETAL DPT. ELETAL LOAD DATA DUTY EQUED POWE TAG UPPLY EVE TYPE OPEAT. EVE kwu PNP PN OUPL. PM ONDT. UPPLY ONTOL OF VOLTAGE NT. ATED EVE MV ATED POWE LV ATED POWE NOM. LV ATED POWE EG. HA TAGE A OOLE V N HA TAGE A OOLE V N HB TAGE A OOLE V N HB TAGE A OOLE V N FLE : PFP--ELE-EL-_V_Bilancio elettrico.xls
5 LENT LOATON GA PLU TOAGE POGGOFOTO GA FELD GA TOAGE PFP--ELE-EL- ev. V // heet of ELETAL UE LT DVEN MAHNE O OTHE UE DATA MEHANAL DEPT. ELETAL DPT. ELETAL LOAD DATA DUTY EQUED POWE TAG UPPLY EVE TYPE OPEAT. EVE kwu PNP PN OUPL. PM ONDT. UPPLY ONTOL OF VOLTAGE XX KA KA XX KA KA LUBE OL KD TAGE OF OMPEON TAGE OF OMPEON LUBE OL KD TAGE OF OMPEON TAGE OF OMPEON V V V V NT. ATED EVE N N N N MV ATED POWE LV ATED POWE NOM. LV ATED POWE EG. FLE : PFP--ELE-EL-_V_Bilancio elettrico.xls
6 LENT LOATON GA PLU TOAGE POGGOFOTO GA FELD GA TOAGE PFP--ELE-EL- ev. V // heet of ELETAL UE LT DVEN MAHNE O OTHE UE DATA MEHANAL DEPT. ELETAL DPT. ELETAL LOAD DATA DUTY EQUED POWE TAG UPPLY EVE TYPE OPEAT. EVE kwu PNP PN OUPL. PM ONDT. UPPLY ONTOL OF VOLTAGE GFA GFB BATTEY OOM EXTATO FAN BATTEY OOM EXTATO FAN V, NT. ATED EVE, V,, MV ATED POWE LV ATED POWE NOM., LV ATED POWE EG.,,, FLE : PFP--ELE-EL-_V_Bilancio elettrico.xls
7 LENT LOATON GA PLU TOAGE POGGOFOTO GA FELD GA TOAGE PFP--ELE-EL- ev. V // heet of ELETAL UE LT DVEN MAHNE O OTHE UE DATA MEHANAL DEPT. ELETAL DPT. ELETAL LOAD DATA DUTY EQUED POWE TAG UPPLY EVE TYPE OPEAT. EVE kwu PNP PN OUPL. PM ONDT. UPPLY ONTOL OF VOLTAGE NT. ATED EVE MV ATED POWE LV ATED POWE NOM. LV ATED POWE EG. HE ELET HEATE V N KAA KAB H PH -PB-A -PB-B -XL- EGENEATON GA OMPEO EGENEATON GA OMPEO EGENEATON GA A OOLE WATE TO TEAT PUMP TO TANK TUK WELLHEAD ONTOL PANEL WELLHEAD ONTOL PANEL WELLHEAD ONTOL PANEL - NT. LGHT V V V V V V, V, N N, N,,,,,,,,,,,,,, FLE : PFP--ELE-EL-_V_Bilancio elettrico.xls
8 LENT LOATON GA PLU TOAGE POGGOFOTO GA FELD GA TOAGE PFP--ELE-EL- ev. V // heet of ELETAL UE LT DVEN MAHNE O OTHE UE DATA MEHANAL DEPT. ELETAL DPT. ELETAL LOAD DATA DUTY EQUED POWE TAG UPPLY EVE TYPE OPEAT. EVE kwu PNP PN OUPL. PM ONDT. UPPLY ONTOL OF VOLTAGE XXA XXB A OMPEO PAKAGE A OMPEO PAKAGE V NT. ATED EVE V MV ATED POWE LV ATED POWE NOM. LV ATED POWE EG. GWA GWB HOT WATE PODUTON HOT WATE PODUTON V V N N PA PB LUBE OL TANFE PUMP LUBE OL TANFE PUMP V V,,,, PAA POTABLE WATE PUMP V,,, PAB POTABLE WATE PUMP V, PB DTBUTON DEEL PUMP V,,,,,,, FLE : PFP--ELE-EL-_V_Bilancio elettrico.xls
9 LENT LOATON GA PLU TOAGE POGGOFOTO GA FELD GA TOAGE PFP--ELE-EL- ev. V // hee of ELETAL UE LT DVEN MAHNE O OTHE UE DATA MEHANAL DEPT. ELETAL DPT. ELETAL LOAD DATA DUTY EQUED POWE TAG UPPLY EVE TYPE OPEAT. EVE kwu PNP PN OUPL. PM ONDT. UPPLY ONTOL OF VOLTAGE PH LOED DAN EOVEY PUMP V NT. ATED EVE N MV ATED POWE LV ATED POWE NOM. LV ATED POWE EG. HB HA KBA KBB GA EFFLUENT TEAT. A OOLE GA EFFLUENT TEAT. A OOLE GA EFFLUENT TEAT. OMPEO GA EFFLUENT TEAT. OMPEO V V V V,,, N, N N N, PAA TANFE PUMP V N PAB TANFE PUMP V N HN FUEL GA HEATE V,,,, -ED-/ -ED-/ VD OMP. -KA-/ WATE OOLNG VD OMP. -KA-/ WATE OOLNG V V N N,, FLE : PFP--ELE-EL-_V_Bilancio elettrico.xls
10 LENT LOATON GA PLU TOAGE POGGOFOTO GA FELD GA TOAGE PFP--ELE-EL- ev. V // heet of ELETAL UE LT DVEN MAHNE O OTHE UE DATA MEHANAL DEPT. ELETAL DPT. ELETAL LOAD DATA DUTY EQUED POWE TAG UPPLY EVE TYPE OPEAT. EVE kwu PNP PN OUPL. PM ONDT. UPPLY ONTOL OF VOLTAGE -EH- -EH- -EP- -EP- --A --B -EL- -ED- -ED- -ED- -ED- -EL- -EL- -EL- -E- MVP- AUXLAY FEEDE MVP- AUXLAY FEEDE PM- AUXLAY FEEDE PM- AUXLAY FEEDE M-A AUXLAY FEEDE M-B AUXLAY FEEDE AP/LP AUXLAY FEEDE DP/ELE AUXLAY FEEDE UP/TU AUXLAY FEEDE ATHOD POT. PANEL AUXLAY FEEDE ATHOD POTETON PANEL ELETAL ABN LOAL DT. PANEL EG. GEN. ABN LOAL DT. PANEL AB ENEL LOAL DT. PANEL EDG ONTOL PANEL NT. ATED N N N N EVE N N N N N N MV ATED POWE LV ATED POWE NOM. LV ATED POWE EG. FLE : PFP--ELE-EL-_V_Bilancio elettrico.xls
11 LENT LOATON GA PLU TOAGE POGGOFOTO GA FELD GA TOAGE PFP--ELE-EL- ev. V // heet of ELETAL UE LT DVEN MAHNE O OTHE UE DATA MEHANAL DEPT. ELETAL DPT. ELETAL LOAD DATA DUTY EQUED POWE TAG UPPLY EVE TYPE OPEAT. EVE kwu PNP PN OUPL. PM ONDT. UPPLY ONTOL OF VOLTAGE -ED-/ -ED-/ VD KOMP. -KA-/ AUXLAY FEEDE VD KOMP. -KA-/ AUXLAY FEEDE NT. ATED EVE MV ATED POWE LV ATED POWE NOM. LV ATED POWE EG. -EJ- NTEONNETNG PANEL AUXLAY FEEDE N -E- -EL- PW- PW- ELE. ONTOL PANEL AUXLAY FEEDE OMPEO AEA LOAL DT. PANEL POWE OKET UT POWE OKET UT N LW- LGHTNG OKET UT LW- LGHTNG OKET UT FLE : PFP--ELE-EL-_V_Bilancio elettrico.xls
12 LENT LOATON GA PLU TOAGE POGGOFOTO GA FELD GA TOAGE PFP--ELE-EL- ev. V // heet of ELETAL UE LT DVEN MAHNE O OTHE UE DATA MEHANAL DEPT. ELETAL DPT. ELETAL LOAD DATA DUTY EQUED POWE TAG UPPLY EVE TYPE OPEAT. EVE kwu PNP PN OUPL. PM ONDT. UPPLY ONTOL OF VOLTAGE T- T- T- ELETAL TANG UT ELETAL TANG UT ELETAL TANG UT NT. ATED EVE MV ATED POWE LV ATED POWE NOM. LV ATED POWE EG. FT- FT- FLOODLGHT TOWE ENL- FLOODLGHT TOWE ENL- N N L- L- OAD LGHTNG ENL- OAD LGHTNG ENL- FLE : PFP--ELE-EL-_V_Bilancio elettrico.xls
13 LENT LOATON GA PLU TOAGE POGGOFOTO GA FELD GA TOAGE PFP--ELE-EL- ev. V // heet of ELETAL UE LT DVEN MAHNE O OTHE UE DATA MEHANAL DEPT. ELETAL DPT. ELETAL LOAD DATA DUTY EQUED POWE TAG UPPLY EVE TYPE OPEAT. EVE kwu PNP PN OUPL. PM ONDT. UPPLY ONTOL OF VOLTAGE ENL- ENL- EXTENAL LGHTNG POE AEA EXTENAL LGHTNG POE AEA NT. ATED EVE MV ATED POWE LV ATED POWE NOM. LV ATED POWE EG. ENL- EXTENAL LGHTNG MULTUE BULDNG ENL- EXTENAL LGHTNG TANFOME AEA -EL- -EL- MULTUE BULDNG LOAL DT. PANEL MULTUE BULDNG HVA PANEL -ED- DET UENT PANEL -ED- UP/TU PANEL -ED- UP/TU PANEL FLE : PFP--ELE-EL-_V_Bilancio elettrico.xls
14 LENT LOATON GA PLU TOAGE POGGOFOTO GA FELD GA TOAGE PFP--ELE-EL- ev. V // heet of ELETAL UE LT DVEN MAHNE O OTHE UE DATA MEHANAL DEPT. ELETAL DPT. ELETAL LOAD DATA DUTY EQUED POWE TAG UPPLY EVE TYPE OPEAT. EVE kwu PNP PN OUPL. PM ONDT. UPPLY ONTOL OF VOLTAGE -EH- -EH- -E- -EP- -EP- -EL- -EL- -EL- -EL- -EL- EL- EL- EL- MVP- AUXLAY FEEDE MVP- AUXLAY FEEDE ELE. ONTOL PANEL AUXLAY FEEDE PM- AUXLAY FEEDE PM- AUXLAY FEEDE ELETAL ABN LOAL DT. PANEL EG. GEN. OOM LOAL DT. PANEL AB ENEL LOAL DT. PANEL MULTUE BULDNG LOAL DT. PANEL OMPEO AEA LOAL DT. PANEL AFETY LGHT TANFOME AEA EXT. AFETY LGHTNG UT EXT. AFETY LGHTNG UT Vd.c. Vd.c. Vd.c. Vd.c. Vd.c. Vd.c. Vd.c. Vd.c. Vd.c. Vd.c. Vd.c. Vd.c. Vd.c.,,,,, NT. ATED,, EVE,,, MV ATED POWE LV ATED POWE NOM. LV ATED POWE EG.,,,,,,, FLE : PFP--ELE-EL-_V_Bilancio elettrico.xls
15 LENT LOATON GA PLU TOAGE POGGOFOTO GA FELD GA TOAGE PFP--ELE-EL- ev. V // heet of ELETAL UE LT DVEN MAHNE O OTHE UE DATA MEHANAL DEPT. ELETAL DPT. ELETAL LOAD DATA DUTY EQUED POWE TAG UPPLY EVE TYPE OPEAT. EVE kwu PNP PN OUPL. PM ONDT. UPPLY ONTOL OF VOLTAGE -ED-/ -ED-/ VD KOMP. -KA-/ AUXLAY FEEDE VD KOMP. -KA-/ AUXLAY FEEDE V (UP) V (UP) NT. ATED EVE MV ATED POWE LV ATED POWE NOM. LV ATED POWE EG. FLE : PFP--ELE-EL-_V_Bilancio elettrico.xls
16 LENT LOATON GA PLU TOAGE POGGOFOTO GA FELD GA TOAGE PFP--ELE-EL- ev. V // heet of ELETAL UE LT DVEN MAHNE O OTHE UE DATA MEHANAL DEPT. ELETAL DPT. ELETAL LOAD DATA DUTY EQUED POWE TAG UPPLY EVE TYPE OPEAT. EVE kwu PNP PN OUPL. PM ONDT. UPPLY ONTOL OF VOLTAGE -JE- -JE- -Q-A -Q-B -JE- TU YT (NTALLED N FELD) EGENY PANEL TELEOMUNATON YT TELEOMUNATON YT TU YT () V (UP) V (UP) V (UP) V (UP) V (UP),,, NT. ATED,,, EVE MV ATED POWE LV ATED POWE NOM. LV ATED POWE EG.,,, -JJ- P MAHALLNG Vd.c. (UP) -JJ- P MAHALLNG Vd.c. (UP) -JV- P YT V (UP) -JE- ED / F&G YT V (UP) -JJ- -JJ- ED / F&G MAHALLNG ED / F&G MAHALLNG Vd.c. (UP) Vd.c. (UP),, () NTALLED N FAL METENG AEA FLE : PFP--ELE-EL-_V_Bilancio elettrico.xls
17 LENT LOATON GA PLU TOAGE POGGOFOTO GA FELD GA TOAGE PFP--ELE-EL- ev. V // heet of ELETAL UE LT DVEN MAHNE O OTHE UE DATA MEHANAL DEPT. ELETAL DPT. ELETAL LOAD DATA DUTY EQUED POWE TAG UPPLY EVE TYPE OPEAT. EVE kwu PNP PN OUPL. PM ONDT. UPPLY ONTOL OF VOLTAGE -JA-A -JA-B -JA-A -JA-B -JH- FLOW OMPUTE FAL MEAUE () FLOW OMPUTE FAL MEAUE () FLOW OMPUTE TEHNAL MEAUE FLOW OMPUTE TEHNAL MEAUE ABNET () Vd.c. (UP) Vd.c. (UP) Vd.c. (UP) Vd.c. (UP) Vd.c. (UP), NT. ATED EVE,,,,,,, MV ATED POWE LV ATED POWE NOM. LV ATED POWE EG.,,,, -JA- FLOW OMPUTE TEHNAL MEAUE () Vd.c. (UP),,,,, () NTALLED N FAL METENG AEA FLE : PFP--ELE-EL-_V_Bilancio elettrico.xls
18 LENT LOATON GA PLU TOAGE POGGOFOTO GA FELD GA TOAGE PFP--ELE-EL- ev. V // heet of ABOBED POWE UMMAY NTALLED ATED POWE LOW VOLTAGE kw, LOW VOLTAGE kva MEDUM VOLTAGE kw, ABOBED NOMAL POWE,, ABOBED EGENY POWE,, V d.c. ABOBED POWE, UP/TU ABOBED POWE, FLE : PFP--ELE-EL-_V_Bilancio elettrico.xls
Future Extension of Total Area 51.10m2 Core House of Total Area 38.57m2
Legend: 7.50 1 2 3 2.80 2.60 7.50 4.50 3.00 03 3.74 3.70 01 3.74 3.70 1.30 rawing : 2.22 3.10 3.80 8.00 2.22 3.09 01 01 01 3.80 8.00 1/60 4 R-PL-01 rev. escription ate 1.23 1.30 2.80 2.60 1.23 02 02 1.30
CHAPTER 30 ENGINEMAN (EN) NAVPERS F CH-70
CHAPTER 30 ENGINEMAN (EN) NAVPERS 18068-30F CH-70 Updated: April 2017 TABLE OF CONTENTS ENGINEMAN (EN) SCOPE OF RATING GENERAL INFORMATION DIESEL ENGINE SYSTEMS MANAGER ENGINEERING MANAGEMENT MECHANICAL
Super Antennas. 3EL. 6 Band YAGI 20, 15, 17, 12, 10, 6M. Model YP-3. Antenna Modeling. YAGI Portable Sys. By Mike Staal of M 2. By Vern Wright W6MMA
uper Antennas By Vern right 6MMA YAG Portable ys. 3EL. 6 Band YAG 20, 5, 7, 2, 0, 6M Model YP-3 Antenna Modeling By Mike taal of M 2 THE UPEANTENNA YP3 6 BAND 3 ELEMENT YAG by Vern, 6MMA Congratulations.
12 1/2 89 1/8 29 7/ /4 RIGHT SIDE VIEW DRAWN BY: T. KENNEDY MECH. ENG: W.W. 8/18/2015 8/10/2015 CHECKED BY: S.A.C. ELEC. ENG: J.E.S.
NOTES:. ALL CLEAANCES AE FACTOY ECOMMENDATIONS. CONSULT LOCAL JUISDICTION FO EXACT CODE COMPLIANCE..... FULTON ECOMMENDS MINIMUM CLEAANCE OF " IN FONT OF ELECTICAL PANELS. FULTON ECOMMENDS " CLEAANCE BETWEEN
CHAPTER 39 GAS TURBINE SYSTEMS TECHNICIAN (GS) NAVPERS F CH-69
CHAPTER 39 GAS TURBINE SYSTEMS TECHNICIAN (GS) NAVPERS 18068-39F CH-69 Updated: January 2017 TABLE OF CONTENTS GAS TURBINE SYSTEMS TECHNICIAN (ELECTRICAL) (GSE) SCOPE OF RATING GENERAL INFORMATION GAS
DGX1600 HDMI HDMI HD MI HD MI HDMI HDMI HD MI HD MI HDMI HDMI HD MI HD MI HDMI HDMI HD MI HD MI. DXLink. DXLink RJ45 RJ45. DXLink.
Video Video Video ONTOL OOM N SPF NMXDEN P (PoE) P A AUD S V PW DB DB DB NMXENN VA AUD S P (PoE) P A V PW Streaming N N PW N MSD MXT AMEA LEFT IHT AND ENTE STAE DM DM DM B A A.mm B A A.mm B A A.mm S S
Position control unit
Ver. HGE 3 EVOPK POE Ver. HGE 3 EVOPK POE Ver. HGE 3 EVOPK POE Ver. HGE 3 EVOPK POE J-F7 - MEHTOLIK-II Multi-axes position controller via high-speed MEHTOLIK-II Up to 6 axes controlled with minimum wiring.
Low Noise Transistor LMBT5087LT3G. PNP Silicon LESHAN RADIO COMPANY, LTD. 1/7 ORDERING INFORMATION MAXIMUM RATINGS DEVICE MARKING
Low Noise Transistor PNP ilicon We declare that the material of product compliance with oh requirements. 3 ODEING INFOMATION Device Marking hipping 2Q 3/Tape & eel 1 2 LMBT587LT3G 2Q /Tape & eel OT 23
OPERATING MANUAL OF µ-mpd-exc ( 4-61A)
4 DIGIT DISPLA During Zero current (STOP) condition only test function is executed by pressing TEST key. KE FUNCTIONS For Password : y pressing "PAA" key, display shows (P100) then press " VALUE " key
Using the Latest Wolfspeed C3M TM SiC MOSFETs to Simplify Design for Level 3 DC Fast Chargers
Using the Latest Wolfspeed C3M TM SiC MOSFETs to Simplify Design for Level 3 DC Fast Chargers Abstract This paper will examine the DC fast charger market and the products currently used in that market.
TV06B5V0-HF Thru. TV06B441-HF
TV65V-HF Thru. TV644-HF Working Peak voltage: 5. to 44Volts Power Dissipation: 6 Watts RoHS Device Halogen Free Features -Glass passivated chip. -6W peak pulse power capability with a /μs -waveform, repetitive
ELE-CMOS-E-2001 Electrical Engineer PERSONAL DATA EDUCATION LANGUAGES COMPUTER SKILLS TRAINING COURSES AND CERTIFICATIONS
101135-ELE-CMOS-E-2001 Electrical Engineer Holds a B. Sc. in Electrical Power & Machines Engineering and has over 14 years hands-on experience, including 13 years working in operation, maintenance, construction
UC184xA / 284xA / 384xA
UC14xA / 24xA / 4xA C UENT M ODE PWM C ONTOLLE T HE I NFINITE P OWE OF I NNOVATION P ODUCTION D ATA S HEET DESCIPTION The UC14xA family of control ICs provides all the necessary features to implement off-line
200W SURFACE MOUNT TRANSIENT VOLTAGE SUPPRESSOR. SMF Series WILLAS ELECTRONIC CORP.
Working : 5.0 to 190 V Peak Pulse Power: 200 W Features Glass passivated chip 200 W peak pulse power capability with a 10/1000 s waveform, repetitive rate (duty cycle):0.01 % Low leakage Uni and Bidirectional
PowerAmp Design. PowerAmp Design PAD138 COMPACT HIGH VOLATGE OP AMP
PowerAmp Design COMPACT HIGH VOLTAGE OP AMP ev C KEY FEATUES LOW COST SMALL SIZE 40mm SQUAE HIGH VOLTAGE 200 VOLTS HIGH OUTPUT CUENT 2A PEAK 75 WATT DISSIPATION - 25 WATT DISSIPATION - 30V/µS SLEW ATE
NEW VALID VT-1000 VERTICAL LATHE
NEW VALID VT-1000 VERTICAL LATHE The Valid VT-1000 CNC Vertical Lathe is the result of several years of collaboration between Valid Machinery of the United States and Precursor Tech Co. LTD. of Taiwan.
Heating and Air Conditioning. Wiring Diagram Package. Basic System. Form: Rev A (602) Supersedes: Nothing
Heating and Air Conditioning Wiring Diagram Package asic System Form: 35-96- ev A (6) Supersedes: Nothing o HVAC Unit Control Panel Zone Manager VAC (5 VA) Heating and Air Conditioning Meridian Cool Mode
FEATURES OPTIONAL FEATURES
-00--0 B Series The Assured Automation B Series electric valve actuators offer a rugged design for quarter turn industrial applications. Designed for use on quarter turn (0 ) ball valves, butterfly valves,
ZXF36L01 VARIABLE Q FILTER DESCRIPTION APPLICATIONS FEATURES AND BENEFITS ORDERING INFORMATION SYSTEM DIAGRAM
ZXF6L0 VAIABLE Q FILTE DESIPTION The ZXF6L0 is a versatile analog high Q bandpass filter. The device contains two sections: Variable Q bandpass filter. 2 Mixer block. The basic filter section requires
Advanced Analog Technology, Inc.
Details are subject to change without notice Advanced Analog Technology, Inc. Features omplete PWM Power ontrol ircuitry Precision eference: 1.25±1% (25 o ) Low Operating oltage: 2.5 to 6.5 Under-oltage
Pressure Transducer FP2000
Pressure Transducer FP2000 Datasheet FPG FPA FPB FPV (Series FP2000) Pressure Transducers for Gauge, Absolute, Barometric and Vacuum Pressure Measurement from 0... 35 mbar up to 0... 700 bar Pressure Types:
Features and Controls VIBE 226/236/246/256/266/276/286
Features and Controls Congratulations on your purchase of a anzar Viberant amplifier. You have purchased a quality product designed and engineered to give you many years of uncompromised musical service.
Principle Of Step-up Chopper
Principle Of Step-up Chopper L + D + V Chopper C L O A D V O 1 Step-up chopper is used to obtain a load voltage higher than the input voltage V. The values of L and C are chosen depending upon the requirement
PBL 3772/1 Dual Stepper Motor Driver
February 999 PBL 3/ Dual Stepper otor Driver Description The PBL 3/ is a switch-mode (chopper), constant-current driver IC with two chan-nels, one for each winding of a two-phase stepper motor. The circuit
LILIAN. High Precision & Excellent Performance. LILIAN, the leading milling machine builder in Taiwan, was established in 1978
LILIAN LILIAN High Precision & Excellent Performance LILIAN, the leading milling machine builder in Taiwan, was established in 1978 and has built more than twenty thousand manual & CNC milling machines
SNUBBER CAPACITOR WITH AXIAL LEADS KPF-9
KPF-9 TEMPERATURE V/S DISSIPATION FACTOR -5 Tan δ x 5 4 3 2-55C -25C +25C +55C +75C +C ΔC FREQUENCY V/S % CHANGE IN CAPACITANCE % C -.5-1 Highlights Self-healing prperty High DV / DT Lw ESR Lw lss plyprpylene
CNC slant bed lathe OPUS
CNC slant bed lathe OPUS 41 5 T e c h n i c a l D a t a s h e e t Solid, polished, and hardened flat guides in combination with a powerful drive system of the main spindle and on the feed axes provide
Loop Signaling Repeater Model
General Description & InstallationPractice 030-100058 ev. F Loop Signaling epeater Model 4370-00 Section 4370-00-100 Issue B Westell, Inc. September 1999 All ights eserved Contents 1. General page 1 2.
TriMark. Gill Group. Orlando Division - 31 FLINT, MI FOODSERVICE EQUIPMENT PLAN & SCHEDULE TYPICAL GUEST FLOOR ICE MACHINE DETAIL
ACTUAL LOCATION OF EFIGEATION ACK TBD BY ACHITECT 10" HC WATE STUB OUTS, PIPING AND CONNECTIONS TO WATE FILTE AND FOM WATE FILTE TO ICE MACHINE BY BY PC F F FLOO SINK BY PC WATE FILTE BY KEC, MOUNTED BY
ECE317 : Feedback and Control
ECE317 : Feedback and Control Lecture : Frequency domain specifications Frequency response shaping (Loop shaping) Dr. Richard Tymerski Dept. of Electrical and Computer Engineering Portland State University
10.PART LISTS 10.1 ELEVATING ASSEMBLY (Ⅰ) ELEVATING ASSEMBLY DRAWING 10-1
10.PART LISTS 10.1 ELEVATING ASSEMBLY (Ⅰ) 10.1.1 ELEVATING ASSEMBLY DRAWING 10-1 10.1.2 ELEVATING ASSEMBLY (Ⅰ) PART LIST NO. PART NO. DESCRIPTION QTY 1. 5TON 15 PNEUMATIC BOOSTING CYLINDER 1 2. HN-M12
SIRIUS/SIKOSTART Soft Starters For Standard Applications
Overview SIRIUS RW0/1 Various versions of the RW0/1 SIRUS soft starters are available: Standard version for fixed frequency three-phase motors, sizes S00, S0, S2 and S Version for fixed-speed three-phase
PANEL-SERVICE CHT SCREW G U (4) PLATE-WALL CHT SCREW G U (2) PLATE-WALL CHT CHT SCREW
PNE-SEV -0-HT G-0-0U () PTE-W 9--HT G-0-0U () P SWITH-STEITE 0-0-HT ETI PTE-W 9--HT 9-0-HT G-0-0U () P PNE SM-VINY OVEE -0-XXX KET-0V ONNE,MOUNT -0-HT P- (ET ) ST PEP E SWITH-STEITE P- (PU) OVH P- (PU)
POWER RELAYS CONTINUOUS DUTY, TYPE II, UNSEALED INTERMITTENT DUTY, TYPE III, UNSEALED
POWR RLYS INUOUS DUTY, TYP II, UNSLD INTRMITTNT DUTY, TYP III, UNSLD General Specifications Designed to MIL-R- - Type II Unsealed ontinuous Duty - Type III Unsealed Intermittent Duty - overed/gasketed
MM1 Fan-coil Controller
MM1 Fan-coil controller MM1-A12 -- Stand alone MM1LA12 -- LO network MM1BA12 -- BAnet network MM1SA12 -- Local network Doc# A stand-alone or network connected unit controlling a three speed fan, a single
The 4 International Power Electronics Conference VDCIDC V I I ID V V I VDCIDC V I I V V I egulated DC Power upply C CP egulated DC Power upply CO P P
The 4 International Power Electronics Conference Excitation ystem by Contactless Power Transfer ystem with the Primary eries Capacitor Method yosuke Nozawa, yota Kobayashi, Hikaru Tanifuji, Yasuyoshi Kaneko,
HIGH SPEED, 100V, SELF OSCILLATING 50% DUTY CYCLE, FULL-BRIDGE DRIVER. V CC (max) V offset(max)
Data heet PD No.60226 revb HIGH PEED, 100V, ELF OCILLATING 50% DUTY CYCLE, FULL-BRIDGE DRIVER Features imple primary side control solution to enable full-bridge DC-Bus Converters for 48V distributed systems
PowerAmp Design. PowerAmp Design PAD39 POWER OPERATIONAL AMPLIFIER
PowerAmp Design POWE OPEATIONAL AMPLIFIE KEY FEATUES HIGH VOLTAGE 00 VOLTS HIGH CUENT 0 AMPS 25 WATT DISSIPATION CAPABILITY HIGH SLEW ATE- 0V/µS FOU WIE CUENT LIMIT OPTIONAL BOOST VOLTAGE INPUTS APPLICATIONS
QUAD DIFFERENTIAL INPUT OPERATIONAL AMPLIFIERS
Order this document by /D The series are lowcost, quad operational amplifiers with true differential inputs. They have several distinct advantages over standard operational amplifier types in single supply
VOLUME - 4 (GENERAL TECHNICAL SPECIFICATIONS)
TENDER DOCUMENT NIT No. DLI/C&E/WI-665/535R FOR Tender for Supply of 3CX185 mm2, 11 KV (UE) grade, Power Cable for Augmentation of Raw Material Handling Receipt and Handling Facilities with new OHP Part
MS-AM806. User/Installation Manual FUSIONENTERTAINMENT.COM
MS-AM806 MAINE AMPIFIE User/Installation Manual FUSIONENTETAINMENT.COM Contents Feature Overview...Pg 3 Control Descriptions.................................Pg 4 Installation.........................................Pg
3TK28 Safety Relays. General data. 7/70 Siemens LV
3TK28 Safety Relays General data Overview SIRIUS safety relays are the key elements of a consistent and cost-effective safety chain. Be it EMERGENCY-STOP disconnection, protective door monitoring or the
METALLOGRAPHY EQUIPMENT
Fully matic Abrasive Cutting Machine - SERVOCUT 602 www.worldoftest.com/fully-automatic-abrasive-cutting-machine-servocut-602 Applications: Fully matic Abrasive Cutting Machine - SERVOCUT 602 is a fully
Apitech Valve Drive Board
M511 Apitech Valve Drive Board Completely Independent Adjustments Current Sourcing PWM Outputs 2 Current Ranges, MID and HI 1-1500 ma PWM Current Range Independent HIA and HIB adjustments Adjustable MID
PowerAmp Design. PowerAmp Design PAD188 COMPACT HIGH VOLATGE OP AMP
Preliminary Information PowerAmp Design ev C KEY FEATUES LOW COST SMALL SIZE 31.5mm SQUAE HIGH VOLTAGE 525 VOLTS OUTPUT CUENT 100mA 5 WATT DISSIPATION CAPABILITY 3V/µS SLEW ATE 1mA QUIESCENT CUENT APPLICATIONS
LV PFC Basics. Power Factor Correction - Basics FK PC PM PFC Januar 07 Page: 1
LV PFC Basics Power Factor Correction - Basics FK PC PM PFC Januar 07 Page: 1 What are the different types of loads? Ohmic loads Lighting bulbs Iron Resistive heating Capacative loads Capacitors Underground
hp
General data Overview Function available, -- Function not available 1) Only soft starting available for 3RW30. 2) Optional up to size S3 (device version). 3) For 3RW402. to 3RW404.; for 3RW405. and 3RW407.
CHAPTER 8 PARAMETER SUMMARY
CHAPTER PARAMETER SUMMARY Group 0: System Parameter VFD-V Series 00-00 Identity Code Based on the model type 00-01 Rated Current Display 00-02 Parameter Reset 00-03 00-04 Star-up Display of the Drive Definitions
600W SURFACE MOUNT TRANSIENT VOLTAGE SUPPRESSOR SMB(DO-214AA) PACKAGE. SMBJ Series WILLAS ELECTRONIC CORP.
Working : 5.0 to 440 V Peak Pulae Power: 600 W SMB (DO-214AA) Features Glass passivated chip 600 W peak pulse power capability with a 10/1000 μs waveform, repetitive rate (duty cycle):0.01 % Low leakage
TABLE OF CONTENT
Page : 1 of 34 Project Engineering Standard www.klmtechgroup.com KLM Technology #03-12 Block Aronia, Jalan Sri Perkasa 2 Taman Tampoi Utama 81200 Johor Bahru Malaysia TABLE OF CONTENT SCOPE 3 REFERENCES
Carbide Circular Sawing Systems. P-70B Min. 5/8 Max Capacity P-100B Min. 3/4 Max. 4 Capacity P-150B Min. 2-3/4 Max.
Carbide Circular Sawing Systems P-70B Min. 5/8 Max. 2.75 Capacity P-100B Min. 3/4 Max. 4 Capacity P-150B Min. 2-3/4 Max. 6 Capacity Carbide Circular Saws Standard Features Include Servo Driven Automatic
Inverter MICROMASTER 410
Inverter MICROMASTER 40 /2 Description /4 Circuit diagrams /6 Technical data /7 Selection and ordering data /8 Options /0 Dimension drawings Siemens DA 5.2 2005/2006 / MICROMASTER 40 Description Inverter
Impedance protection on power transformer.
Impedance protection on power transformer www.siemens.com/siprotec5 SIPROTEC 5 Application Impedance Protection on Power Transformer APN-045, Edition 1 Content 1...3 1.1 Introduction...3 1.2 Application
Version number A=standard P=Cold Plate (Frame A only) T=Brake chopper (Frame A only) Input voltage 11=115VAC 21=230VAC 1φ 23=230VAC 3φ 43=400VAC
Type number key VFD 007 E 43 A Version number A=standard P=Cold Plate (Frame A only) T= (Frame A only) Input voltage 11=115VAC 21=230VAC 1φ 23=230VAC 3φ 43=400VAC VFD-E series Power 007=0.75kW 022=2.2kW
Fan and Pump AC Inverter
Fan and Pump AC Inverter Key Features for Fan and Pump Applications PID and Auto Energy Saving Functions. Input Phase Loss and Output Phase Loss Protection. LCD Keypad can be used to copy parameter settings
RT9167/A. Low-Noise, Fixed Output Voltage, 200mA/500mA LDO Regulator. General Description. Features. Applications. Pin Configurations
Low-Noise, Fixed Output Voltage, 2mA/5mA LDO Regulator General Description he is a 2mA/5mA low dropout and low noise micropower regulator suitable for portable applications. he output voltages range from
ACPOWER. Profession Power Solution Provider R E G D E ISO 9001:2008
A POW Ground-Military Power Units AMF Series 500VA~400KVA 400Hz Solid State onverter Profession Power Solution Provider G IS T D UKAS 00 ISO 900:008 A POW AMF- put 060 F T apacity Outlook 60KVA Free Standing
Auxiliary Contact (10 600V) Auxiliary Contact (10 5V DC)
Bulletin C,, C Accessories Accessories Auxiliary Contacts Contactors are supplied with one normally open and one normally closed auxiliary contact (A rating) as standard. Additional auxiliary contacts,
DUGARD. DUGARD Machine. Dugard 42 Range of High Production Multi Axis CNC Turning Centres. Machine Tools That Create Solutions Since 1939.
DUGARD Machine Tools That Create Solutions Since 1939 Dugard 42 Range of High Production Multi Axis CNC Turning Centres DUGARD Machine Tools www.dugard.com sales@dugard.com 01273 732286 Dugard 42iTTU/S
Meters. Ampere Meter. Volt Meter. Watt Meter. Var. Meter. Power Factor Meter. Frequency Meter. Demand Meter. Meter Relay.
Meters Ampere Meter Volt Meter Watt Meter Var. Meter Power Factor Meter Frequency Meter Outside Connection (Watt, PF, Var) 3 2 7 Receive Indicator Meter Demand Meter Meter Relay Meter Dimensions Meter
How to maximize reliability using an alternative distribution system for critical loads
White Paper WP024001EN How to maximize reliability using an alternative distribution system for critical loads Executive summary The electric power industry has several different distribution topologies
CLEARANCES AND FITS. Guidelines and Tables. Machine Drawing KL Narayana, P. Kannaiah, K. Venkata Reddy
CLEARANCES AND FITS Guidelines and Tables Machine Drawing GUIDELINES CLEARANCE FITS Hole Shaft Combination Description Uses H11/a11, H11/c11, H11/c9, H11/d11, A11/h11, C11/h11, D11/h11 H9/C9, H9/d10,
Operating Instructions and Parts Manual Electronic Variable Speed Turret Mill Model JTM-1050EVS
Operating Instructions and Parts Manual Electronic Variable Speed Turret Mill Model JTM-1050EVS JET 427 New Sanford Road LaVergne, Tennessee 37086 Part No. M-690060 Ph.: 800-274-6848 Revision G1 06/2015
[f(t)] 2 + [g(t)] 2 + [h(t)] 2 dt. [f(u)] 2 + [g(u)] 2 + [h(u)] 2 du. The Fundamental Theorem of Calculus implies that s(t) is differentiable and
![[f(t)] 2 + [g(t)] 2 + [h(t)] 2 dt. [f(u)] 2 + [g(u)] 2 + [h(u)] 2 du. The Fundamental Theorem of Calculus implies that s(t) is differentiable and](/thumbs/92/108353356.jpg "[f(t)] 2 + [g(t)] 2 + [h(t)] 2 dt. [f(u)] 2 + [g(u)] 2 + [h(u)] 2 du. The Fundamental Theorem of Calculus implies that s(t) is differentiable and")
Midterm 2 review Math 265 Fall 2007 13.3. Arc Length and Curvature. Assume that the curve C is described by the vector-valued function r(r) = f(t), g(t), h(t), and that C is traversed exactly once as t
Speed control of three phase induction motor drive using SVPWM control scheme
Speed control of three phase induction motor drive using SVPWM control scheme 1 Gajjar Jahnavibahen B., 2 Mr.Ghanshyam Gajjar 1 MEPEED Student, Dept. of Electrical Engineering, MEFGI, Rajkot, 2 SR. Engineer,
Sealed Interface Control: EC20300
ISO 9001:2000 WITH DESIGN Certificate #02.002.1 Sealed Interface Control: EC20300 FEATURES: Weather tight control package Pulse Width Modulated output Waterproof altitude pressure and vapor release vent
LECTURE 24 INDUCTION MACHINES (1)
ECE 330 POWER CIRCUITS AND ELECTROMECHANICS LECTURE 24 INDUCTION MACHINES (1) Acknowledgment-Thee handout and lectue note given in cla ae baed on mateial fom Pof. Pete Saue ECE 330 lectue note. Some lide
NEO TELE-TRONIX PVT. LTD. 6/7 Bijoygarh, Kolkata , Tel : ; Fax :
NEO TELE-TRONIX PVT. LTD. 6/7 Bijoygarh, Kolkata - 700 032, Tel : 033 2477 3126; Fax : 033 2477 2403 www.ntplindia.com SPECIFICATION NTPL MAKE MICRO-CONTROLLER BASED AUTOMATIC 50KV/10A AC HIGH VOLTAGE
OPERATING MANUAL OF µ-mpd-dxc ( 40 TO 500A)
4 DIGIT DISPLA During Zero current (STOP) condition only test function is executed by pressing TEST key. KE FUNCTIONS For Password : y pressing "PAA" key, display shows (P100) then press " VALUE " key
OILWELL PT1100A, S/N P199A61, p/b CAT 3508, S/N 95Y01254, w/5 x 6 Charge Pump (Rebuilt)
Capabilities: DEPTH RATING 18,000 Draw Works OIME SL 1500 1 1/4 DL Brake PARMAC 342 Hydromatic Engines (3) CAT 3412 Engines, S/Ns 81Z11431 & 81708039 Mast PYRAMID 146 x 23 815,000# SHL w/6 Sheave Crown
Siemens AG Motion Control Drives. SINAMICS S120 and SIMOTICS. Edition October Catalog News D 21.4 N. siemens.
Motion Control Drives Catalog News D 21.4 N Edition October 201 SINAMICS S120 and SIMOTICS siemens.com/drives Related catalogs Motion Control System PM 21 SIMOTION Equipment for Production Machines Industrial
3RA13, 3RA14 Contactor Assemblies
RA, RA Contactor Assemblies RA Contactor Assemblies for Wye-Delta Starting RA complete units,... kw Siemens AG 0 Overview These RA contactor assemblies for wye-delta starting are designed for standard
Curriculum for Motor vehicle mechanic, light-duty vehicles Vg3 / in-service training at a training establishment
Curriculum for Motor vehicle mechanic, light-duty vehicles Vg3 / in-service training at a training establishment Dette er en oversettelse av den fastsatte læreplanteksten. Læreplanen er fastsatt på Bokmål
AWUF Series. Wall-Mount Air Handler 1½ to 3 Tons. Contents. Product Features
Series Wall-Mount Air Handler 1½ to 3 Tons Contents Nomenclature...2 Accessories...2 Product Specifications...3 Dimensions...6 Airflow Data...8 Wiring Diagram...9 Product Features Equipped with a Check
UDM. 20 year. CNC Double Column No.63, Ln. 136, Sec. 1. Jiahou Rd., Houli Dist., Taichung City 421, Taiwan. Machining Center
20 year U chine Technology Of Experience in Design and Manufacturing of CNC Horizontal Boring & Milling Machine Conventional Horizontal Boring & Milling Machine UBM series CNC Horizontal Boring & Milling
MV ELECTRICAL TRANSMISSION DESIGN AND CONSTRUCTION STANDARD. PART 1: GENERAL 1.01 Transformer
PART 1: GENERAL 1.01 Transformer A. This section includes liquid filled, pad mounted distribution transformers with primary voltage of 12kV or 4.16kV (The University will determine primary voltage), with
1500 UNDERGROUND J-BOXES & VAULTS
00 UNDEGOUND J-BOXES & VAULTS //0 C UE4-UE Secondary J-Box " x 0" x " Deep ~ UJ Primary Junction Box Single Phase ~ UJ Primary Junction Box Three Phase ~ UJ Primary Ø Padmount Junction Box pad ~ UJM Primary
ACE3006M N-Channel Enhancement Mode MOSFET
Description uses advanced trench technology to provide excellent R DS(ON). This device particularly suits for low voltage application such as power management of desktop computer or notebook computer power
Transducing electrical quantities Iskra MIS d.d. Measuring Transducers. Features
Measuring Transducers Transducing electrical quantities Iskra MIS d.d. Measuring Transducers Features AC, DC POWER SYSTEM MEASUREMENT MICROPROCESSOR CONTROL HOUSING FOR DIN RAIL MOUNTING IN COMPLIANCE
GE Industrial Solutions. New ASTAT XT. Digital soft starters for 3ph standard induction motors. GE imagination at work
GE Industrial Solutions New ASTAT XT Digital soft starters for ph standard induction motors GE imagination at work ASTAT XT Digital soft starters for ph standard induction motors Approvals / Marking GE
LEEDAN ELECTRIC TECHNOLOGY CO.,LTD AC SERVO DRIVER 75A
AC SERVO DRIVER GENERAL TYPE DRIVER AC SERVO DRIVER SERVO MOTOR DRIVE TECHNOGY FULLY DIGITIZED VERSATILE CONTROL SUPERIOR PERFORMANCE CURVE FEATURES 1. Fully digitized data setting. 2. Fast control circuit
ECET 211 Electric Machines & Controls Lecture 2-1 (Part 1 of 3) Symbols and Drawing for Electric Motor Control Systems
ECET 211 Electric Machines & Controls Lecture 2-1 (Part 1 of 3) Symbols and Drawing for Electric Motor Control Systems Text Book: Chapter 2. Understanding Electrical Drawings, Electric Motors and Control
LCP128TM Dimming and Switching System
Please ead CP128TM Dimming and Switching System Installation Guide Table of Contents Step-by-Step Instructions Page Step 1: Panel Dimensions...............................................................4
LN-25 PRO Wire Feeder
SEMIAUTOMATIC WIRE FEEDERS LN-25 PRO Wire Feeder Portable Industrial Wire Feeders Built upon the tradition and success of the LN -25, the new LN -25 PRO is designed to be simple, reliable and easy to service.
MV network design & devices selection EXERCISE BOOK
MV network design & devices selection EXERCISE BOOK EXERCISES 01 - MV substation architectures 02 - MV substation architectures 03 - Industrial C13-200 MV substation 04 - Max. distance between surge arrester
TECO F510 Inverter. Quick Start Guide. Step 1. Supply & Motor connection
Quick Start Guide TECO F510 Inverter This guide is to assist you in installing and running the inverter and verify that it is functioning correctly for it s main and basic features. For detailed information
TECHNICAL DATASHEET #TDAX A DC MOTOR CONTROLLER P/N: AX Variable Speed Control, Onboard I/O CAN SAE J1939, Rugged Packaging
TECHNICAL DATASHEET #TDAX102000 35A DC MOTOR CONTROLLER P/N: AX102000 Variable Speed Control, Onboard I/O CAN SAE J1939, Rugged Packaging with Electronic Assistant Features: Unidirectional or bi-directional
Application sheet for Green 300 series controllers. Title. Purpose. Application Controller Loop Configuration: Wiring: Explanation :
Furnace temperature control with Solid State Relay(SSR) AP35001 Control a furnace temperature by using UT350 temperature controller. Model UT350 can drive SSR as an actuator directly. Electrical Furnace
N3 INVERTER SERIES. Operating Manual. 230V 1Ø 0.5-3HP kW. 230V 3Ø HP kW. 460V 3Ø 1-75HP kW. Revision: 2.03.
N3 INVERTER SERIES Operating Manual 230V 1Ø 0.5-3HP 0.4-2.2kW 230V 3Ø 0.5-40HP 0.4 30kW 460V 3Ø 1-75HP 0.75 55kW Revision: 2.03.05 Table of Contents 1.0 Introduction... 1 2.0 Product Inspection... 2 2.1
Product Manual. SZ1025a. Description The SZ1025a is a microprocessor-based controller designed for VAV terminal unit applications.
Product Manual SZ0a VAV Box ontroller Description The SZ0a is a microprocessor-based controller designed for VAV terminal unit applications. Features Stand-alone or network operation Built-in velocity
Ear+ Purist HD. Ear+ HD High Definition Stereo Headphone Amplifier
Ear Purist HD Ear HD High Definition Stereo Headphone Amplifier 2AX7 Users' Manual ev Oct. 7/3 Mapletree Audio Design loyd Peppard.., Seeley's Bay, Ontario, Canada, K0H 2N0 (63) 387-3830 www.mapletreeaudio.com
Siemens AG Allows easy and consistent configuration with one series of overload relays (for small to large loads)
Overview Features Benefits 3RU11 3RB20/3RB21 3RB22/3RB23 Sizes Are coordinated with the dimensions, connections S00...S3 S00... S12 S00... S12 and technical characteristics of the other devices in the
Single-phase DC Brushless Motor Driver IC
Single-phase DC Brushless Motor Driver IC GENERAL DESCRIPTION PACKAGE OUTLINE The NJU7357 is single-phase DC brushless motor driver IC. And It features MOS-FET driver circuit for better output characteristics.
INFLUENCE OF VOLTAGE SAGS ON PM SYNCHRONOUS MOTOR DRIVES
7 th International Conference on DEVELOPMENT AND APPLICATION SYSTEMS S u c e a v a, R o m a n i a, M a y 27 29, 2 4 INFLUENCE OF VOLTAGE SAGS ON PM SYNCHRONOUS MOTOR DRIVES Vlado POROBIC 1, Vladimir KATIC
IR2153/IR2153D SELF-OSCILLATING HALF-BRIDGE DRIVER. Features. Product Summary. Packages. Description. Typical Connections
Features Integrated 600V halfbridge gate driver 15.6V zener clamp on Vcc True micropower start up Tighter initial deadtime control Low temperature coefficient deadtime Shutdown feature (1/6th Vcc) on C
Transient Voltage Suppressors (TVS) Data Sheet
Transient Suppressors (TVS) Data Sheet Features For surface mounted applications in order to optimize board space Low profile package Built-in strain relief Glass passivated junction Low inductance Excellent
Siemens AG Rated voltage. field weakening speed,
speed Shaft height power torque Speed during ontinuous field weakening speed, ) max. ) Speed, max. ) n rated S P rated M rated I rated V rated n n S n max rpm kw (P) Nm (lb f -ft) V rpm rpm rpm Order No.
Product Selection Guide
Product Selection Guide October 2013 TABLE OF CONTENTS Sensor IC Package Portfolio..............................3 Power IC Package Portfolio..............................4 Magnetic Linear and Angular Position
SN54HC165, SN74HC165 8-BIT PARALLEL-LOAD SHIFT REGISTERS
N5465, N465 8-BIT PAAE-OAD IFT EGITE 16C DECEMBE 1982 EVIED MAY 199 Complementary Outputs Direct Overriding oad (Data) Inputs Gated Clock Inputs Parallel-to-erial Data Conversion Package Options Include
PKS-PRO-AEA-EC-08-JP22
PKS-PRO-AEA-EC-08 - Servo System FEATURES Updates 1000 Inputs/Outputs of Information of 338 oz-in Power Ratings up to 750 Watts Open Network Based on Ethernet 17-bit Absolute Encoder Maximum Speed of 4,500