LEEDAN ELECTRIC TECHNOLOGY CO.,LTD AC SERVO DRIVER 75A
|
|
- Timothy Norris
- 6 years ago
- Views:
Transcription
1 AC SERVO DRIVER
2 GENERAL TYPE DRIVER AC SERVO DRIVER SERVO MOTOR DRIVE TECHNOGY FULLY DIGITIZED VERSATILE CONTROL SUPERIOR PERFORMANCE CURVE FEATURES 1. Fully digitized data setting. 2. Fast control circuit sampling and high stability. POWERFUL FUNCTIONS 1. Four control modes including position, speed, torque and commnication provide fast positioning. 2. Electronic gear ratio. 3. Output circle dividing ratio. 4. Communication interface. (RS232C, RS485) 5. Built-in auxiliay power source ±15V, ±24V. COMPACT CONSTRUCTION, LIGHT WEIGHT, HIGH SPEED, WIRING SAVING 1. Light weight, small space occpation. 2. Motor speed reaches 3000rpm. 3. Saving Wiring on motor. (Only 8 Wires for A, B, Z phase) APPLICATIONS The ED series digital AC servo driver is suitable for a wide range of machines, such as CNC multi-axis carving machine, constant length and constant position feeding, food packaging, robot, semi-conductor and injection molding, etc. and automated equipment. Output power from 60W to 1.5Kw. Built-in RS232C and RS485 communication interface, combined with AC servo motor for high efficiency drive. The product is upgraded to 1.08 edition, featuring extremely smooth performance curves. 1
3 Position Control Speed Control Torque Control ED SERIES SPECIFICATION DRIVER SERIES Control method Sine wave PWM control ED SERlES ED2004 ED2010 ED2030 ED2006 ED2015 ED2040 ED2007 ED2022 ED2056 ED2075 Input power : Main power Sing. phase AC100V~115V±10% 50/60Hz Sing. /3 phase AC200V~230V±10% 50/60Hz Input power: Control power Sing. phase AC100V~230V±10% 50/60Hz Control method (changeable) Position, speed and torque control Command input method CW/CCW, CLK+DIR, (AB phase) Max. pulse frequency 500K pps FF gain 0~100% Electronic gear ratio 1/50 A/B 50 (A=1~50000, B=1~50000) Position smoothness constant 0~10 sec. Positioning finish check 0~50000 Pulse Ext. speed command input 0~±10V (pos. volt) CCW rotation. 0~±10V (comp.-10.0v~+10.0v) Int. speed command 0~± rated speed (3 int. speeds) Speed ratio 1:5000 Speed variation (Rated speed) load 0~100%, Variation -0.03%. Volt±10%, variation -0.2%, temperature 25±25 C, variation -0.5% Acc/dec. limit Acc/dec. time constant:1~9999ms, Speed filter time constant: 1~9999ms Zero speed check 0~3000 rpm Speed reach check 0~3000 rpm P/PI change Speed circuit ratio/ratio-integration, Control change (Ext. input control) Torque limit (Ext. input) 0~ ±10V/Max. torque Torque limit (Int. setting) 0~Max. torque Conmand input 0~±10V(pos. volt->ccw torque), 0~±9.999V (comp-9.999v~+9.999v) Time constant 0~9999ms Speed limit (Ext. input) 0~±10V/3000rpm Speed limit (Int. setting) 0~3000 rpm Signl function RS232C, RS485 JOG function Manual selection (Running speed according to internal speed command) Alarm memory function Automatically memorizes alarm message according to alarm order (10 sets) Brake interlock function Brake controls output automatically according to servo ON/OFF condition Dynamic brake functin Internal parameter setting Abnormal drive prohibited function Dynamic brake, servo stop, CCW/CW drive prohibited. Emergency stop function Dynamic brake/ servo stop Generative energy absorption function Built-in continuous generative absorption 5w System protection function Over-current, over-voltage, overload, over-speed, encoder error, memory error and CPU error. Analog monitoring output Speed display output. Torque current display output Encoder output signal A, A, B, B, Z, Z encoder output signal Encoder frequency output 1/N (N=1~63) Encoder frequency output Input signal Servo ON, alarm clear, encoder reset, CCW/CW drive prohibition, command pulse prohibition, error clear/ servo lock, control change, P/PI change, external torque limit, internal speed selection and emergency stop. Output signal Built-in auxiliary power Servo ready, alarm, alarm code, in restricting, in operating, in prohibiting, serro stop, positioning finish/ speed reach, Zero speed detecting/brake ±15V (test power source) 2
4 ED SERIES FUNCTIONS LIST FUNCTIONS MODES OPER. RANGE INITIAL VAL UNIT Data display selection P,S,T Speed/torque/load Speed Alarm display P,S,T Alarm/history/release I/O display P,S,T I/O terminal Control mode P,S,T Torque/speed/position Position Brake detecting time P,S,T -2,000~+2, msec CCW/CW change setting P,S,T CCW / CW CCW Encoder signal output P,S,T 1/1~1/63 1/1 Analog display output selection P,S,T Torque/speed/voltage/pulse Speed Dynamic brake P,S,T Effective/ineffective Effective Zero speed output/brake output change P,S,T Zero speed output/dynamic brake stop Zero speed Drive prohibited time P,S,T Zero speed stop/dynamic brake stop Zero speed stop Reached check speed S,T 0~3,000 1,000 rpm CCW internal torque limit value P,S 0~ % CW internal torque limit value P,S -300~0-300 % Generative resistor protection P,S,T 0.0~ % Manual run P,S,T Effective/ineffective Ineffective Position Comm. input pulse P CW/CCW P/P (2 Phase) CW/CCW Electronic gear numerator P 1~50,000 1 Electronic gear denominator P 1~50,000 1 Positioning finished range P 0~50, Pluse CCW max. saved pulses P 1~+500, ,000 Pluse CW max. saved pulses P -500,000~1-500,000 Pluse Position ratio gain P 1~ Position smoothness time constant P 0~9,999 1 msec Internal speed command 1 S -3,000~+3,000 0 rpm Internal speed command 2 S -3,000~+3,000 0 rpm Internal speed command 3 S -3,000~+3,000 0 rpm Speed command filter time constant S 0~9,999 Linear acc/dec time constant S 0~9,999 Speed ratio GAIN P,S 1~1, Speed integration time constant P,S 1~1, External command input range S 100~3,000 3,000 External command input offset S -10.0~ v Torque command filter time constant T 0~9,999 0 msec External torque command input range T 30~3, % / v Exteranl torque command offset T ~ V Internal speed limit 1 P,S,T 0~3,000 0 rpm Internal speed limit 2 P,S,T 0~3,000 0 rpm Internal speed limit 3 P,S,T 0~3,000 0 rpm RAM EEPROM P,S,T Effective/ineffective Ineffective DISK EEPROM P,S,T Effective/ineffective Ineffective EEPROM DISK READ P,S,T Effective/ineffective Ineffective 3
5 LEGEND AND APPLICATION OPERATION 1. Operation condition includes various settings, such as function, parameter and monitoring. 2. MODE: For mode change data input or function executing. 3. UP: For adding 1 to value displayed on LED. 4. DOWN: For deducting 1 to value displayed on LED. 5. DATA: For chang address and data. Also allows for number movement. DISPLAY Four digits display 7-step LED displays servo condition or alarm number. LARM AND STOP MPTLY WILL. BREAK MC ORDER RS232 CONNECTOR For online with personal computer or teaching box. AC220/230 SING / TWO PHASE 50/60HZ AC110/115 50/60HZ TB1 RS485 CONNECTOR For connecting with control box. COMMCET GENERATWE RESTISTANCE RED SERVO MOTOR ENCODER WHITE BLACK INCREMENT ENCODER TERMINAL CHANNEL CONNECTOR (TB1) 1. R.S.T : Power input terminals on main circuit. 2. U.V.W : Connecting terminals to servo motor. 3. FG : Third grounding terminal. CN1 CONTROL CONNECTOR (CN1) Allows for Connecting with PLC or controller. 4
6 POSITION CONTRAL MODE - CN1 CN1 SERVO ON ALARM CLEAR P/P1 CHANGE CW DRIVE PROHIBITED CCW DRIVE PROHIBITED EXTERNAL TORQUE LIMIT ERROR CLEAR ABS ERROR ENCODER EMERGENCY STOP CONTROL METHOD CHANGEABLE COMMAND PULSE PROHIBITED COMMAND PULSE P INPUT COMMAND PULSE D INPUT CCW TORQUE LIMIT COMMAND ANALOG CW TORQUE LIMIT COMMAND SON 1 ALRS 2 PCNT 3 FSTP 4 RSTP 5 TLMT 6 CLR 7 ECLR 8 EMG 9 MDC 12 INH PP 14 PN 15 DP 16 DN 17 FG 50 PIC 27 AG 29 NIC PA 36 /PA 37 PB 38 /PB 39 PZ 40 /PZ 44 EG 41 SD 42 /SD 43 Z0 50 FG 18 REDY 19 ALM 20 ZS/BI 21 INP/INS 22 LM/A0 23 PC/A1 24 ST/A2 25 GC/A A /A B /B Z /Z SD /SD PROPORTION PUTPUT DIFFERENTIAL ORIGIN SIGNAL OUTPUT OPEN C SERVO READY OUTPUT ALARM BRAKE INTERLOCK POSITIONING FINISH TORQUE IN RESTRICTING ALARM P OPERATING /ALARM1 PROHIBITED /ALARM 2 GATE OFF/ALARM 3 ENCODER SIGNAL OUTPUT PROPORTION PUTPUT DIFFERENTIAL ABS POSTION OUTPUT SPEED DISPLAY OUTPUT ANALOG TORQUE DISPLAY OUTPUT TG 30 AG 32 CUR V POWER OUTPUT -15V POWER OUTPUT +24V POWER OUTPUT +15V 33-15V V 45 5
7 SPEED CONTRAL MODE - CN1 CN1 SERVO ON ALARM CLEAR P/P1 CHANGE CW DRIVE PROHIBITED CCW DRIVE PROHIBITED EXTERNAL TORQUE LIMIT ERROR CLEAR ABS ERROR ENCODER EMERGENCY STOP CONTROL METHOD CHANGEABLE COMMAND PULSE PROHIBITED SPEED COMMAND INPUT CCW TORQUE LIMIT COMMAND CW TORQUE LIMIT COMMAND SPEED DISPLAY OUTPUT ANALOG TORQUE DISPLAY OUTPUT SON 1 ALRS 2 PCNT 3 FSTP 4 RSTP 5 TLMT 6 CLR 7 ECLR 8 EMG 9 SPD1 10 SPD2 11 MDC SIN 26 AG 29 PIC 27 AG 32 NIC 28 AG 32 FG 50 TG 30 AG 29 CUR PA 36 /PA 37 PB 38 /PB 39 PZ 40 /PZ 44 EG 41 SD 42 /SD 43 Z0 50 FG 18 REDY 19 ALM 20 ZS/BI 21 INP/INS 22 LM/A0 23 PC/A1 24 ST/A2 25 GC/A A /A B /B Z /Z SD /SD PROPORTION PUTPUT DIFFERENTIAL ORIGIN SIGNAL OUTPUT OPEN C SERVO READY OUTPUT ALARM BRAKE INTERLOCK POSITIONING FINISH TORQUE IN RESTRICTING ALARM P OPERATING /ALARM1 PROHIBITED /ALARM 2 GATE OFF/ALARM 3 ENCODER SIGNAL OUTPUT PROPORTION PUTPUT DIFFERENTIAL ABS POSTION OUTPUT +15V POWER OUTPUT -15V POWER OUTPUT +24V POWER OUTPUT +15V 33-15V V 45 6
8 TORQUE CONTRAL MODE - CN1 CN1 SERVO ON ALARM CLEAR P/P1 CHANGE CW DRIVE PROHIBITED CCW DRIVE PROHIBITED EXTERNAL TORQUE LIMIT ERROR CLEAR ABS ERROR ENCODER EMERGENCY STOP CONTROL METHOD CHANGEABLE COMMAND PULSE PROHIBITED TORQUE COMMAND INPUT CCW SPEED LIMIT COMMAND CW SPEED LIMIT COMMAND SPEED DISPLAY OUTPUT ANALOG TORQUE DISPLAY OUTPUT SON 1 ALRS 2 FSTP 4 RSTP 5 ECLR 8 EMG 9 SPD1 10 SPD2 11 MDC SIN 26 AG 29 PIC 27 AG 32 NIC 28 AG 32 FG 50 TG 30 AG 29 CUR PA 36 /PA 37 PB 38 /PB 39 PZ 40 /PZ 44 EG 41 SD 42 /SD 43 Z0 50 FG 18 REDY 19 ALM 20 ZS/BI 21 INP/INS 22 LM/A0 23 PC/A1 24 ST/A2 25 GC/A A /A B /B Z /Z SD /SD PROPORTION PUTPUT DIFFERENTIAL ORIGIN SIGNAL OUTPUT OPEN C SERVO READY OUTPUT ALARM BRAKE INTERLOCK POSITIONING FINISH TORQUE IN RESTRICTING ALARM P OPERATING /ALARM1 PROHIBITED /ALARM 2 GATE OFF/ALARM 3 ENCODER SIGNAL OUTPUT PROPORTION PUTPUT DIFFERENTIAL ABS POSTION OUTPUT +15V POWER OUTPUT -15V POWER OUTPUT +24V POWER OUTPUT +15V 33-15V V 45 7
9 Parameter account Appellation Control mode Speed ratio gain ccw/cw change setting Function Control type 0:Speed control 1:Position control 2:Torque control Ratio gain of speed control. Feasible ratio gain depends on motor type and loading inertia. Therefore, if no vibration happen, larger gain value can be set. Set value is in opposition to single motor s percentage of feasible value. When set speed (inside and outside) and torque command (positive or negative), set value is decided by motor CCW rotation. 0:speed and torque command are all positive. 1:positive speed command and negative torque command. 2:negative speed command and positive torque command. 3:speed and torque command are all negative. Appellation Speed integration time constant Int. speed limit 1 Int. speed limit 2 Int. speed limit 3 Int. speed command 1 Int. speed command 2 Int. speed command 3 Function Set speed control integration constant. Feasible integration constant depends on motor type and loading inertia. Therefore, if no vibration happen, larger time constant can be set. Set value is set by msec unit. Set speed limit value. Set value is motor revolutions. Please choose SPD1 or SPD2 in CN1 when set limit 1 2 or 3. Set speed control command. CCW represents positive rotation, however rotation direction can be changed in system constant positive/negative rotation set. Please choose SPD1 or SPD2 in CN1 when set limit 1 2 or 3. 8
10 Break communication Output Alarm Appellation Alarm Action Matter 0 Normal 1 Main circuit power phase loss Action start when below standard voltage 2 Regeneration error S_ON represents over resistance or abnormal loop. S_OFF represents over voltage. 3 Over load Action start when over loading happen. 4 IMP error Abnormal condition happen in power transform module. 5 Encoder error (ABZ) Action start when abnormal encode happen. 6 Temperature error (Over heat) System temperature is higher than set value. 7 Keep 8 Memory error Abnormal memory action in CPU. 9 Emergency stop Action starts when emergency signal input. 10 Keep 11 Position aberration overmuch Action starts when position aberration is over than set value. 12 Over-speed Action starts when rotation speed is over than set value. 13 CPU error Action starts when abnormal CPU action happen. 14 Driver stop error Action starts when CCW/CW signal input at the same time. 15 Keep Manufacturer by. 9
Maxsine AC SERVO. EP100 QuickGuide. Maxsine Electric Co.,Ltd
Maxsine EP100 QuickGuide AC SERVO Maxsine Electric Co.,Ltd 1.1 Standard wiring Position control Maxsine EP100(B) SERVO DRIVER SERVOMOTOR 3 Phase AC220V NFB MC PE R S T r CN2 U V W PE 14 5V 2 3 4 1 4 Pins
More informationWarning. Circuit & change components between entering shutting down the power supply and stopping showing CHARGE LED light of the Servo driver.
Warning and Alert: Warning Do not proceed to the assembly of the line while electrifying. Circuit & change components between entering shutting down the power supply and stopping showing CHARGE LED light
More informationAC Servo System TSTE Series Simplified Manual
AC Servo System TSTE Series Simplified Manual Warning and Alert: Warning Do not proceed to the assembly of the line while electrifying. Circuit & change components between entering shutting down the power
More informationSingle-phase or three phase AC220V (-15% ~ +10%) 50 ~ 60Hz
KT270-H Servo Drive Features: The use of DSP ( digital signal processor ) chip, greatly accelerating the speed of data acquisition and processing, the motor running with good performance. Application of
More informationERCD. Features ERCD. Main functions P Supports 4 operating methods including pulse train, programming, point trace, online instructions
single-axis Single-axis single-axis Single axis Dedicated for T4L / T5L / C4L / C5L / YMS Low price and compact in size. In addition to the conventional functions, a pulse train function is added for a
More informationShenzhen Alpha Inverter Co., Ltd. AS100 AC Servo Drive
Shenzhen Alpha Inverter Co., Ltd. AS100 AC Servo Drive 1 Feature AS100 series AC servo system consists of the all-digital AC servo drive and the permanent-magnet servo motor. AS100 AC servo drive adopts
More informationFor more information on these functions and others please refer to the PRONET-E User s Manual.
PRONET-E Quick Start Guide PRONET-E Quick Start Guide BASIC FUNCTIONS This guide will familiarize the user with the basic functions of the PRONET-E Servo Drive and assist with start up. The descriptions
More informationDS2 series servo drive
DS2 series servo drive Manual WUXI XINJE ELECTRIC CO., LTD. Data No.: SC209 20110412 1.0 2 Safety notes Confirmation Do not use the drivers that are broken, lack of parts or wrong types. Installation Make
More informationDS2 series 220V servo driver
DS2 series 220V servo driver Fast reference manual Xinje Electronic Co.,Ltd. Serial NO.SC209 20120312 1.0 2 DS2 series 220V servo driver user manual Safety caution Confirmation when receive products DO
More informationSGDH Amplifier. Part Number Guide. Quick Reference Guide. Amplifier: SGDH - 15 A E- Motor: SGMGH - 09 A C A 6 C $10
Quick Reference Guide SGDH Amplifier $ Document TRM--SGEN 9// V..4 Yaskawa Electric America Technical Training Services Part Number Guide Norman Dr. South Waukegan, IL 685-8-YASKAWA Fax: (847) 887-785
More informationBLuAC5 Brushless Universal Servo Amplifier
BLuAC5 Brushless Universal Servo Amplifier Description The BLu Series servo drives provide compact, reliable solutions for a wide range of motion applications in a variety of industries. BLu Series drives
More informationBLuAC5 Brushless Universal Servo Amplifier
BLuAC5 Brushless Universal Servo Amplifier Description The BLu Series servo drives provide compact, reliable solutions for a wide range of motion applications in a variety of industries. BLu Series drives
More informationEngineering Data AC Servo Drive HA-680
Engineering Data AC Servo Drive HA-680 QUICKLINK www.harmonicdrive.de/1110 SAFETY GUIDE For FHA series, RSF series, HA series Read this manual thoroughly before designing the application, installation,
More informationInstallation Servo Drive Dimensions
Installation Servo Drive Dimensions A B Model R88D WTA3H WTA5H A 55 160 130 50 8 149 75 5 0.8 4 1.25 WT01H WT02H WT04H A 75 160 130 63 8 149.5 75 5 1.1 8 2 WT08HH A 90 160 180 63 8 149.5 75 5 1.7 11 2
More informationCopyright 2014 YASKAWA ELECTRIC CORPORATION All rights reserved. No part of this publication may be reproduced, stored in a retrieval system, or
Copyright 2014 YASKAWA ELECTRIC CORPORATION All rights reserved. No part of this publication may be reproduced, stored in a retrieval system, or transmitted, in any form, or by any means, mechanical, electronic,
More informationMITSUBISHI General-Purpose AC Servo D-S24 MR-J2- Specifications BCN-B
MITSUBISHI General-Purpose AC Servo MR-J2- Specifications D-S24-1 - CHANGE Rev. Contents Drawn by - 2 - CTENTS 1. OUTLINE 2. SPECIFICATIS 3. CNECTI 4. I/O SIGNALS 5. OPERATI SEQUENCE 6. DISPLAY 7. PARAMETERS
More informationPSF-520 Instruction Manual
Communication software for HA-520/HA-680 Series PSF-520 Instruction Manual Thank you for implementing our AC servo driver HA-520, HA-680 series. The PSF-520 software sets various parameters and checks
More informationMotor Drives & Controllers
Motor Drives & Controllers For the past 20 years, FORMOSA MOTORS is well known for pursuing high technology motors in Taiwan. To make customer s requirements satisfatisory & perfect We supply customers
More informationEzi-STEP MINI Characteristics
Ezi-STEP MINI Characteristics Ezi-STEP MINI is a micro stepping system that incorporates a motor and DSP (Digital Signal Processor) equipped drive that is integrated seamlessly together as a system. This
More informationCommitted to Premium Quality. AC Servo System Catalog
Committed to Premium Quality AC Servo System Catalog Company Profile CONTENTS DB100 Series AC Servo System 03 Application fields 04 Servo Driver Product Description 05 Servo Motor Product Description 07
More informationMSS-D - AC SERVO SYSTEMS
MSS-D - AC SERVO SYSTEMS USER MANUAL (V1.11) MasterDrive Contents HOW TO READ THE PARAMETERS?... 6 SAFETY NOTICE... 7 CHAPTER 1 PRODUCT INTRODUCTION... 11 1.1 PRODUCT INSPECTIONS... 11 1.2 PRODUCT MODEL
More informationHSD2 Series Servo Drive User Manual
HSD2 Series Servo Drive User Manual HNC Electric Limited I Thank you for purchasing our HSD2 AC servo drives. HSD2 Series AC Servo Drive This manual provides the related information about product installation,
More informationRDV-X/RDV-P Robot driver Only for pulse train control
Single axis Robot driver Only for pulse train control As the size is small and weight is light, it is easy to use in automated machinery. Features 1 Dedicated pulse train control The dedicated pulse train
More informationMR-C Servo SERVOMOTORS & AMPLIFIERS. Step Up to Servo Performance
MR-C Servo SERVOMOTORS & AMPLIFIERS Step Up to Servo Performance Small, Easy-to-Use, High- Performance. An Extraordinarily Compact, Intelligent Servo. The MR-C brushless servo, in a handy super-compact
More informationEC35. Optical Commutation Kit Encoder Page 1 of 7. Description. Mechanical Drawing. Features
Page 1 of 7 Description The EC35 quick assembly optical commutation encoder is designed for high volume, low cost, OEM motion control applications. The EC35 provides A/B/Z incremental outputs and U/V/W
More informationW r.p.m. r.p.m. Nm Nm P50B05020D P50B07040D
SNYO DENKI RUSHLESS C SEROMOTORS & DRIES rushless C operation 4500 rpm top speed 240C single phase supply 0.16 to 10.8Nm continuous torque 50W to 3kW shaft power rushless C servomotors combine the best
More informationAD Series. AC Servo Drive. For the highest requirements in performance and precision
Range of Performance.1 kw 7 kw (.32 33.4 ) Drastically Reduced Motor Cogging Torque Advanced Drive Technology Autotuning Built-in Programmable Sequence with max. 512 program steps and 1 positions Plug
More informationDORNA EPS-B2 SERIES USER MANUAL AC SERVO SYSTEMS (V1.05) 1
DORNA AC SERVO SYSTEMS EPS-B2 SERIES USER MANUAL (V1.05) http://en.dorna.com.cn 1 Contents HOW TO READ THE PARAMETERS?... 6 SAFETY NOTICE... 7 CHAPTER 1 PRODUCT INTRODUCTION... 11 1.1 PRODUCT INSPECTIONS...
More information10.9. Serial communication parameters Motor parameters Paramters handling Status monitor
Contents 1. Introduction... 4 1.1. About power supply for AU9290... 4 1.2. About applicable stepping motors... 4 1.3. About setting and storing of parameters... 5 1.4. About optional functions... 5 1.5.
More informationIntegrated Servo Motor UCS57
Integrated Servo Motor Introduction is a new generation of high performance digital integrated servo drive motor, which is a series of low voltage AC servo products integrated with AC servo motor and drive
More informationXDL-L7S Series. Servo Drive Designation. Servo Drive Designation. * Range 200V : 0.1kW~5.0kW 400V : 1.0kW~15kW
Servo Drive Designation XDL-L7S Series Servo Drive Designation Model Name Communication Input ower Supply Capacity ncoder Type Option XDL Series S : Standard I/O Type A : 200VAC B : 0VAC * Range 200V :
More informationIntegrated Easy Servo
ies 1706 Integrated Easy Servo Motor + Drive + Encoder, 18 32VDC, NEMA17, 0.6Nm Features Easy servo control technology to combine advantages of open loop stepper systems and brushless servo systems Closed
More informationHA-655. Total Motion Control. Precision Gearing & Motion
HA-655 Total Motion Control Precision Gearing & Motion Control WARNING SAFETY GUIDE For actuators, motors, control units and drivers manufactured by Harmonic Drive LLC Read this manual thoroughly before
More informationNo Gain Tuning. Hunting. Closed Loop System
2 No Gain Tuning Conventional servo systems, to ensure machine performance, smoothness, positional error and low servo noise, require the adjustment of its servo s gains as an initial crucial step. Even
More informationServo Motor Driver. 4. Specifications: Digital Driver Model ACS806. Digital Technology, max. 80 V DC / 6.0 A, W. 1. Product Description:
Digital Driver Model ACS806 Digital Technology, max. 80 V DC / 6.0 A, 50 400 W 1. Product Description: Leadshine's fully digital AC servo drive ACS806 is developed with 32-bit DSP based on advanced control
More informationPersonal computer software: CX-One. G-Series ML2 Servo drive. G-Series ML2 Servo drive ADR 1 1 ADR X X1 2 3 X X10 COM
AC SERVO D RIVER 7 AC SERVO D R IVER 7 AC SERVO D R IVER 7 AC SERVO D RIVER 7 AC SERVO D RIVER 7 RD-N@, RD-T@ -Series servo drive A compact servo drive family for motion control. Compact size and integrated
More informationConnection and Operation
Connection and Operation LED Display Control Module Motor Regeneration Unit Terminals Power Connection Terminals Protective Earth Terminal Internal Potentiometer Acceleration Time Potentiometer Deceleration
More informationDORNA EPS-B1 SERIES USER MANUAL AC SERVO SYSTEMS (V1.11) 1
DORNA AC SERVO SYSTEMS EPS-B1 SERIES USER MANUAL (V1.11) http://en.dorna.com.cn 1 Contents HOW TO READ THE PARAMETERS?... 6 SAFETY NOTICE... 7 CHAPTER 1 PRODUCT INTRODUCTION... 11 1.1 PRODUCT INSPECTIONS...
More informationPKG-EML10-EDB10-CBLS System Diagram and Specifications
PKG-EML10-EDB10-CBLS System Diagram and Specifications Included Components: EML-10APA22 AC Servo Motor EDB-10AMA Servo Driver BDM-GA16-05 Power Cable BMP-GA24-05 Encoder Cable EDB-BSC-CC24A Comm Cable
More informationServo Drive EP100 3A/ EP100 5A 60/80/90/110/130/180ST M. Mige Electric Co., Ltd DECLARATION
MIGE EP100 AC SERVO User Manual Servo Drive EP100 3A/ EP100 5A 60/80/90/110/130/180ST M Mige Electric Co., Ltd DECLARATION Hangzhou Mige Electric limited company all rights reserved. Without this company's
More informationEDB series AC servo system
EDB series AC servo system User s Manual V. 2.00 Estun Limited Warranty This manual does not entitle you to any rights. Estun reserves the right to change this manual without prior notice. All rights reserved.
More informationGeneral-Purpose AC Servo. MELSERVO-JE Servo amplifier INSTRUCTION MANUAL (TROUBLE SHOOTING)
General-Purpose AC Servo MELSERVO-JE Servo amplifier INSTRUCTION MANUAL (TROUBLE SHOOTING) F Safety Instructions Please read the instructions carefully before using the equipment. To use the equipment
More informationServo Indexer Reference Guide
Servo Indexer Reference Guide Generation 2 - Released 1/08 Table of Contents General Description...... 3 Installation...... 4 Getting Started (Quick Start)....... 5 Jog Functions..... 8 Home Utilities......
More informationCHAPTER 8 PARAMETER SUMMARY
CHAPTER PARAMETER SUMMARY Group 0: System Parameter VFD-V Series 00-00 Identity Code Based on the model type 00-01 Rated Current Display 00-02 Parameter Reset 00-03 00-04 Star-up Display of the Drive Definitions
More informationSmartStep Series
R7D-AP@, R7M-A@ SmartStep Series A new concept in Servo The Smart alternative to Stepper motors Easy to setup, easy to operate. SmartStep is as easy to use as a stepper motor Front-panel switches make
More informationAC SERVO DRIVES SERIES. Servopacks. Certified for ISO9001 and ISO14001
AC SERVO DRIVES SERIES Servopacks Certified for ISO9001 and ISO14001 JQA-0422 JQA-EM0202 CONTENTS SERVOPACKs Single-axis Analog Voltage/Pulse Train Reference SERVOPACKs 326 Single-axis MECHATROLINK-II
More informationProduct Discontinuation Notices. Discontinuation Notice of AC Servomotors/drivers. OMNUC U series
PRODUCT NEWS Product Discontinuation Notices March 2, 2009 Servomotors/Servo Drivers No.2009091E Discontinuation Notice of AC Servomotors/drivers. OMNUC U series Product Discontinuation Recommended Replacement
More information1S servo drive System configuration
R88D-1SN@@@-ECT Sysmac general purpose servo 23-bit resolution encoder Fast and secure screw-less push-in in all connectors Pluggable connectors for easy pre-wiring and system maintenance Direct wiring
More informationM F TYPE S R-SETUP. Setup Software
M0006935F TYPE S R-SETUP Setup Software Preface This user s manual explains the use and specifications of the Setup Software for AC servo amplifier R series. Notifications on this User s Manual: To completely
More informationies-2309 Integrated Easy Servo
Datasheet of the integrated easy servo motor ies-09 ies-09 Integrated Easy Servo Motor + Drive + Encoder, 0-0VDC, NEMA, 0.9Nm Features Easy servo control technology to combine advantages of open-loop stepper
More informationL E C T U R E R, E L E C T R I C A L A N D M I C R O E L E C T R O N I C E N G I N E E R I N G
P R O F. S L A C K L E C T U R E R, E L E C T R I C A L A N D M I C R O E L E C T R O N I C E N G I N E E R I N G G B S E E E @ R I T. E D U B L D I N G 9, O F F I C E 0 9-3 1 8 9 ( 5 8 5 ) 4 7 5-5 1 0
More informationGeneral-Purpose AC Servo. MELSERVO-JE Servo amplifier INSTRUCTION MANUAL (TROUBLE SHOOTING)
General-Purpose AC Servo MELSERVO-JE Servo amplifier INSTRUCTION MANUAL (TROUBLE SHOOTING) D Safety Instructions Please read the instructions carefully before using the equipment. To use the equipment
More informationXC4e PWM Digital Drive
PWM Digital Drive HyperWire fiber-optic interface Up to 30 A peak output current Integral power supply Amplifiers/Drives Drive brush, brushless, voice coil, or stepper motors Safe torque off (STO) safety
More informationWarning. Circuit & change components between entering shutting down the power supply and stopping showing CHARGE LED light of the Servo driver.
Warning and Alert: Warning Do not proceed to the assembly of the line while electrifying. Circuit & change components between entering shutting down the power supply and stopping showing CHARGE LED light
More information$MPTFE -PPQ 4UFQQJOH 4ZTUFN.JOJBUVSJ[FE $PNQBDU 4J[F $MPTFE -PPQ 4ZTUFN /P (BJO 5VOJOH /P )VOUJOH )JHI 3FTPMVUJPO 'BTU 3FTQPOTF
$MPTFE -PPQ 4UFQQJOH 4ZTUFN.JOJBUVSJ[FE $PNQBDU 4J[F $MPTFE -PPQ 4ZTUFN /P (BJO 5VOJOH /P )VOUJOH )JHI 3FTPMVUJPO 'BTU 3FTQPOTF ú ú ú ú ú ú 2 2 No Gain Tuning Conventional servo systems, to ensure machine
More informationPosition Table Function. Closed Loop System. Network Based Motion Control. No Gain Tuning
2 2 Position Table Function Position Table can be used for motion control by digital input and output signals of host controller. You can operate the motor directly by sending the position table number,
More informationAnalog monitor cable. Filter Motion control unit. General purpose cable. (Refer to chapter Sigma-II rotary motors) Cables SGMGH, SGMUH, SGMSH, SGMBH
CHARGE NS A R C N B C N 4 XD-@, XD-@-E Intelligent servo drive. Integrated controller and network connectivity. NCT. Patented non-linear algorithm for tight control Very low tracking error with no overshoot
More informationSV2Dx Servo Drives SV200 Servo Drives for DC-Powered Applications
24 to 60 VDC input 10 A cont., 20 A peak output current Compact size for multi-axis applications Ideal for OEMs Designed for use with J Series motors Wide range of control options 8 regular digital inputs,
More informationMotion Controller 2-Quadrant PWM for Brushless DC-Servomotors
Motion Controller -Quadrant PWM for Brushless DC-Servomotors Series BLD 0 Series BLD 0 Operating Instructions Miniature Drive Systems Micro Drives DC-Micromotors Precision Gearheads Servo Components Drive
More informationDrive CM User Manual
The Best Choice for the Most Benefit! At LS Mecapion, we are committed to providing premium benefits to all of our customers. Drive CM User Manual Servo Configuration Tool Ver. 1.0 Safety Precautions -
More informationGeneral-Purpose AC Servo. MELSERVO-J4 Servo amplifier INSTRUCTION MANUAL (TROUBLE SHOOTING)
General-Purpose AC Servo MELSERVO-J4 Servo amplifier INSTRUCTION MANUAL (TROUBLE SHOOTING) N Safety Instructions Please read the instructions carefully before using the equipment. To use the equipment
More informationDCS810 Brushed DC Servo Drive
Datasheet of Brushed DC Servo Drive DCS810 DCS810 Brushed DC Servo Drive 18-80VDC, 0-20A, 20-400W Based on DSP control technology and high smooth servo control algorithm Parameter visible tuning tools,
More informationNdrive Series. Digital Servo Amplifiers PWM. Wide output power range from 10 A peak to 200 A peak at 320 VDC. 2- or 3-phase AC line input or DC input
Ndrive PWM Amplifiers/Drives Ndrive Series Digital Servo Amplifiers PWM Wide output power range from 10 A peak to 200 A peak at 320 VDC 2- or 3-phase AC line input or DC input CE approved and NRTL safety
More informationQR12. Output. A = Line Driver B = Line Driver ABZ/ Open Collector UVW C = Sin/Cos/ Line Driver UVW D = Sin/Cos/Open Collector UVW
QR12 DESIGN FEATURES Low profile assembled height of 0.99" Bearing design simplifies encoder attachment Resolutions up to 20,000 lines per revolution SIN/COS outputs available up to 1250 LC 4, 6 or 8 pole
More informationXC4 PWM Digital Drive
XC4 PWM Digital Drive HyperWire fiber-optic interface Up to 30 A peak output current Integral power supply Drive brush, brushless, voice coil, or stepper motors Safe torque off (STO) safety circuit Drive
More informationXC4e PWM Digital Drive
XC4e PWM Digital Drive HyperWire fiber-optic interface Up to 30 A peak output current Integral power supply Drive brush, brushless, voice coil, or stepper motors Safe torque off (STO) safety circuit Drive
More informationGeneral-Purpose AC Servo. MELSERVO-JE Servo amplifier INSTRUCTION MANUAL (TROUBLE SHOOTING)
General-Purpose AC Servo MELSERVO-JE Servo amplifier INSTRUCTION MANUAL (TROUBLE SHOOTING) B Safety Instructions Please read the instructions carefully before using the equipment. To use the equipment
More informationGeneral-Purpose AC Servo. MELSERVO-JE Servo amplifier INSTRUCTION MANUAL (TROUBLE SHOOTING)
General-Purpose AC Servo MELSERVO-JE Servo amplifier INSTRUCTION MANUAL (TROUBLE SHOOTING) B Safety Instructions Please read the instructions carefully before using the equipment. To use the equipment
More information815-BR SERVO AMPLIFIER FOR BRUSH SERVOMOTORS
815-BR SERVO AMPLIFIER FOR BRUSH SERVOMOTORS USER GUIDE September 2004 Important Notice This document is subject to the following conditions and restrictions: This document contains proprietary information
More informationPKS-PRO-AEA-EC-30-GP22
PKS-PRO-AEA-EC-30 - EtherCAT Servo System FEATURES Updates 1000 Inputs/Outputs of Information of 2,025 oz-in Power Ratings up to 3000 Watts Open Network Based on Ethernet 2,500 PPR Incremental Encoder
More informationGeneral-Purpose AC Servo. MELSERVO-J4 Servo amplifier INSTRUCTION MANUAL (TROUBLE SHOOTING)
General-Purpose AC Servo MELSERVO-J4 Servo amplifier INSTRUCTION MANUAL (TROUBLE SHOOTING) K Safety Instructions Please read the instructions carefully before using the equipment. To use the equipment
More informationDYN2 Series D M M AC SERVO DRIVE LOW VOLTAGE TYPE A - GENERAL PURPOSE PULSE/ANALOG. Dynamic Motor Motion Technology Corporation
D M M Dynamic Motor Motion Technology Corporation AC SERVO DRIVE DYN2 Series LOW VOLTAGE TYPE A - GENERAL PURPOSE PULSE/ANALOG Published in Canada Low Voltage AC Servo Technique for the Future 2 FEATURES
More informationDORNA. EPS-EB Series User Manual. AC Servo Systems (V1.00)
DORNA AC Servo Systems EPS-EB Series User Manual (V1.00) http://www.cn-dorna.com 1 Safety Notice Dangers Input power Input power of this driver is AC220V. When it is installed to a machine and begins running,
More informationVariable Frequency Drive / Inverter (0.4 ~ 280kW)
Variable Frequency Drive / Inverter (0.4 ~ 280kW) & Standard Features Configuration Comparison Comparison Table Enclosure IP00 IP20 NEMA 1 Rating Single phase 0.4 2.2kW 0.4 1.5kW Three phase 0.4 4kW Constant
More informationGeneral-Purpose AC Servo. Servo Amplifier Instruction Manual (Troubleshooting)
General-Purpose AC Servo Servo Amplifier Instruction Manual (Troubleshooting) SAFETY PRECAUTIONS (Please read the instructions carefully before using the equipment.) To use the equipment correctly, do
More informationPKS-PRO-AEA-EC-20-GP22
PKS-PRO-AEA-EC-20 - EtherCAT Servo System FEATURES Updates 1000 Inputs/Outputs of Information of 1352 oz-in Power Ratings up to 2000 Watts Open Network Based on Ethernet 2,500 PPR Incremental Encoder Maximum
More informationUser manuel. Hybrid stepper servo drive
User manuel Hybrid stepper servo drive 1 Overview Hybridstepper servo drive system integrated servo control technology into the digital step driver. It adopts typical tricyclic control method which include
More informationHSV-180D Series AC Servo Drive Unit. User's Manual V Wuhan Huazhong Numerical Control Co., Ltd. Wuhan China
Series HSV-180D AC Servo Drive User's Manual V2.0 2010.11 Wuhan Huazhong Numerical Control Co., LTD Wuhan China Contents 1. Safety Precautions... 5 1.1 Symbols of Safety Precautions...5 1.2 Meaning of
More information1S servo drive System configuration
R88D-1SN@@@-ECT 1S servo drive Sysmac general purpose servo 23-bit resolution encoder Fast and secure screw-less push-in in all connectors Pluggable connectors for easy pre-wiring and system maintenance
More informationSeries Servo Drive. ProNet-10 A M A. Rated Power Power voltage Control Style Design Sequence
ProNet Series Servo Drive Features The response performance has been improved more than three times than EDB series, which realizes online real time inspecting of load inertia, the gain can be adjusted
More informationEDC Quick Start Guide
EDC Quick Start Guide BASIC FUNCTIONS This guide will familiarize the user with the basic functions of the EDC Servo Drive and assist with start up. The guide will cover the following: 1. Restoring Parameters
More informationServo Motors B-9. Overview. Tuning-Free NX. Tuning-Free NX Series. Servo Motors. Accessories. Page. NX Series B-10 B-9
Servo Motors B-9 Overview NX Servo Motors Accessories Page B-1 B-9 B-1 Servo Motor and Driver Package Technical reference Page H-1 Regulations & Standards Page I-2 For detailed
More informationCable connection. Sigma-II series SERVOPACK SGDH- 200V. Ver. Servo Drive CN3 (CN10) CN1 CN2 NS500 JUSP-NS500 SERVOPACK. 200V Ver.
JUSP- unit connectivity with positioning functionality. Connects directly to the drive Simplifies distributed control and information management No programming languages are required. Various positioning
More informationTroubleshooting Alarm Displays Warning Displays
10 10.1 Alarm Displays............................................10-2 10.1.1 List of Alarms...................................................... 10-2 10.1.2 of Alarms............................................
More informationHA-680 Series Manual
AC Servo Driver for 24 VDC Power Supply HA-680 Series Manual (For FHA-8C, 11C, 14C/RSF-3A, and 5A) Thank you very much for your purchasing our HA-680 series AC servo driver for 24 VDC power supply. Parameter
More informationRexroth Frequency Converter Fe 0.75 kw to 7.5 kw / 400 VAC
Electric Drives and Controls Hydraulics Linear Motion and Assembly Technologies Pneumatics Rexroth Frequency Converter Fe 0.75 kw to 7.5 kw / 400 VAC Simple, scalable and economical Service Bosch Rexroth
More informationRotary Measurement Technology Absolute Encoders, Multiturn
Mechanical drive Safety-LockTM High rotational speed -40 to 90 C IP Temperature High IP High shaft load capacity Shock/ vibration resistant Magnetic field proof Short-circuit proof Reverse polarity protection
More informationAV-300i Specifications. Saftronics Inc. VG10 Product Specifications VG10. Dynamic Vector Drive
Saftronics Inc. www.saftronics.com TM AV-300i Specifications VG10 Product Specifications VG10 Dynamic Vector Drive 1 Category Item Description Nominal Motor 230 VAC, 3 Phase 1/4 Hp to 125 Hp 460 VAC, 3
More informationControl chain diagrams
Control chain diagrams 565 Control chain diagrams What this chapter contains The chapter presents the reference chains of the drive. The control chain diagrams can be used to trace how parameters interact
More informationNICE900 -Door Drive Setup Manual for Asynchronous / Synchronous Motor with Encoder Feedback (Document Release Dt ) Sr. No
Inova Automation Pvt Ltd., NIBHI Corporate Centre, 3 rd Floor, No.7, CBI Colony, 1 st Main Link Road, Perungudi, Chennai-600096. Ph:-+91 (0)44 4380 0201 Email:- info.inovaindia@inova-automation.com Website:-
More informationAC Servo Drive DYN3 Series. User Manual
AC Servo Drive DYN3 Series User Manual Rev. 1.14b December, 2012 About This Manual Thank you for purchasing the DYN3-Series AC Servo drive from DMM Technology Corp. Before the servo drive is installed
More information8510 AC Spindle Drive System
8510 AC Spindle Drive System Manual Important User Information Solid state equipment has operational characteristics differing from those of electromechanical equipment. Safety Guidelines for the Application,
More informationSmall, Low-Voltage Digital Servo Drive
Catalog 8-4/USA Small, Low-Voltage Digital Servo Drive The (Small, Low-Voltage Drive) is a powerful and compact digital servo drive available for use with 24V input providing up to 5 Amps of continuous
More informationAZ Series. Function Edition. Closed Loop Stepping Motor and Driver Package. Operation. I/O signals. Parameter
HM-6262 Closed Loop Stepping Motor and Driver Package Operation I/O signals Parameter AZ Series Function Edition Method of control via Modbus RTU (RS-485 communication) Method of control via industrial
More informationAC Drive Technology. An Overview for the Converting Industry. Siemens Industry, Inc All rights reserved.
AC Drive Technology An Overview for the Converting Industry www.usa.siemens.com/converting Siemens Industry, Inc. 2016 All rights reserved. Answers for industry. AC Drive Technology Drive Systems AC Motors
More informationSD1000 Series Servo System FRECON ELECTRIC (SHENZHEN) CO.,LTD (V1.0)
Series Servo System (.) Stable and Reliable Servo System Stable and Reliable Servo System bit S/IN High ccuracy Encoder Differential drive connection can support M pulse input / single terminal drive optional
More informationSV200 DC Servo System
SV200 DC Servo System Hardware Manual Applied Motion Products, Inc. Table of Contents 1 Introduction... 7 1.1 About This Manual...7 1.2 Documentation Set for the SV200 DC Series Servo Drive...7 1.3 Safety...7
More informationAnalog Voltage/Pulse Train Reference Type SERVOPACKs. (For Rotary Servomotors) (For Linear Servomotors) SGDV - R70 A 01 B
Analog Voltage/Pulse Train Reference Type SERVOPACKs SGDV- 0 (For Rotary Servomotors) SGDV- 05 (For Linear Servomotors) Model Designations SGDV - R70 A 0 B 002000 Options 002000 Base-mounted, varbish(standard)
More informationThe Guide book for L7N Drive (Operating by XGT(PN8B) 21.Feb, 2014 SI team/wonkee Son LS Mecapion
The Guide book for L7N Drive (Operating by XGT(PN8B) 21.Feb, 2014 SI team/wonkee Son LS Mecapion 1 Contents 1. Model name 2. Wiring 3. Connect PLC and Servo 4. Operation parameters settings 5. Servo parameters
More informationROLL TO ROLL FUNCTION MANUAL FR-A (0.4K)-04750(90K)-R2R FR-A (0.4K)-06830(280K)-R2R FR-A (315K)-12120(500K)-R2R
INVERTER ROLL TO ROLL FUNCTION MANUAL FR-A820-00046(0.4K)-04750(90K)-R2R FR-A840-00023(0.4K)-06830(280K)-R2R FR-A842-07700(315K)-12120(500K)-R2R Roll to Roll Function The FR-A800-R2R inverter has dedicated
More information