LED Lighting. Direct ring type. LED Lighting. Trunk cable. LED lighting. Power source MRL-16/MRLW-16 MRL-31A-L MRL-36/MRLW-36 / MRLB-36
|
|
|
- Agnes Wilkerson
- 5 years ago
- Views:
Transcription
1 System configuration LED lighting (P54 to 58) Trunk cable + + (P59) Power source (P59) MRC-01 / 02 / 03 MLED-A12010L MLED-B12025LRD * Trunk cable is not necessary when using MLED-C12025WLR. Long life, compact, light weight LED lighting for image processing. High intensity LED is used. Various shapes of lighting such as ring and rectangular type, transmission-type, coaxial-type, and chip mounted type are available. Power source is 1-2 channel type. Manual light control, external lamp ON/OFF, external light control type, and digital light control type are available. Direct ring type High intensity LED is arranged at high density. Lighting from 360 creates even light with no shadows. MRL-16/MRLW-16 Substrate inspection, liquid crystal alignment, label inspection, plastic container inspection, mounter, IC impress inspection, two-dimensional code reader MRL Inner MRL-20/MRLW-20 / MRLB-20 MRL-28/MRLW-28 / MRLB-28 MRL-31A-L Made to order MRL-31A Made to order / MRL-31A-UV Made to order MRL-36/MRLW-36 / MRLB-36 MRL-50/MRLW-50 / MRLB-50
2 Low angle ring type Lighting from low angle of 360, shiny objects are not reflected. Best for shallow unevenness (embossment, etc.) and scratches. MSL-68/MSLW-68 MSLB-68 BGA solder ball position, shape, and area inspection; laser carving reading; inspection for scratches and dirt on wafer or glass substrates. MSL Inner Shadow less ring type / shadow less square type Even, soft, diffused lighting on shiny objects. Best to prevent halo effect. MKL-20/MKLW-20 MKLB-20 IC impress inspection, substrate part inspection, wafer visual inspection, solder inspection, connector pitch inspection. Square type is the best for squareshape objects such as BGA and QFP. Inner Shadow less ring type MKL Shadow less square typemql Outside MKL-33/MKLW-33 MKLB-33 MQL-32/MQLW-32 MQLB-32
3 Edge light transmitting type Thin and compact design to save space. Uniform luminosity and high intensity are achieved by using a reflecting light guide. MEG Lighting size 2525=25 x 25mm 5370=53 x 70mm Lead frame inspection; shape recognition and size measurement of electronic parts; bend lead inspection for GFP, QSP, and SOP; metal surface inspection, bacteria culture observation; silhouette observation MEG-5370/MEGW-5370 MEGB-5370 MEG-2525/MEGW-2525 MEGB-2525 Bar type MBAR-5015/MBARW-5015 MBARB-5015 High intensity LEDs are arranged in a barshape. Side light from any angle can be achieved according to objects. LED defect inspection, shape recognition and size measurement of electronic parts, fabrication crack inspection, recognition of complicated shapes, straight pipe fluorescent lamp replacement. MBAR Lighting size
4 Simulated coaxial type Provides simulated even coaxial lighting to telecentric MML lenses and other lenses without coaxial episcopic illumination. Alignment and surface inspection of mirror surface such as wafer, metal surface, film, liquid crystal, and glass. Pattern and mark inspection of printed boards. MCEP Lighting size MCEP-20/MCEPW-20 MCEPB-20 MCEP-56/MCEPW-56 MCEPB-56 MCEP-82/MCEPW-82 MCEPB-82
5 Chip mounted type Thinner and smaller than conventional LEDs because LED elements are bonded to a substrate. Even, soft light can be achieved in a short working distance. Electronic part and wafer alignment in small spaces. M CBL R=Ring type S=Low angle type B=Bar type B=Blue Ring, low angle =Inner 16, 31, 50mm Bar =Lighting size 70x30mm MRCBL-16/MRCBLB-16 MRCBL-31/MRCBLB-31 MSCBL-50/MSCBLB-50 MBCBL-7030/MBCBLB-7030
6 Power source Manual light control, external analog light control, and external digital light control types are available. Select according to your desired purpose. A double-channel type with independent channels is also available to light two LEDs at the same time W power supply for Moritex LED lightings. MLED-A12010L (Single-light manual light control type) Capacity: 10W MLED-B12025LRD (Single-light external digital light control type) Capacity: 25W * Trunk cable MRC-01/02/03 is necessary to connect MLED-A12010L or MLED-B12025LRD to a LED lighting. MLED-C12025WLR (Double-light manual light control type) Capacity: 25W in total MLED-C12025WLR2 (Double-light manual light control type) Capacity: 25W in total *Trunk cable MRC-01/02/03 is not necessary. Trunk cable MRC-01/02/03 For MLED- A12010L and MLED-B12025LRD *Trunk cable MRC-01/02/03 is not necessary. *AC200V Type. * This cable is necessary to connect a LED lighting with the power source MLED-A12010L or MLED-B12025LRD. Extension cable / branch cable Extension cable Two-branch cable M-CB2 Four-branch cable M-CB4
High Power LED Spot Illumination and Coaxial Illuminatuion
100 RoHS CE High Power Spot Illumination and Four product series ranging in level of intensity from the MCEP-070 Series to MCEL Series are available for customers diverse needs. The wide variety of choices
Our Vision... Tomorrow s Innovation
Our Vision... Tomorrow s Innovation JM VisTec System Pte Ltd Company Specialization: JM Vistec is a dynamic and growing Singapore-based hardware component solutions company that provides complete end-to-end
Broad range of lighting solutions
Broad range of lighting solutions MORITEX and SCHOTT's has the most complete LED illumination portfolio available with the constant current controlled "MG-Wave Series" and constant voltage controlled "MCV-Light
Two major features of this text
Two major features of this text Since explanatory materials are systematically made based on subject examination questions, preparation
APPLICATIONS FOR TELECENTRIC LIGHTING
APPLICATIONS FOR TELECENTRIC LIGHTING Telecentric lenses used in combination with telecentric lighting provide the most accurate results for measurement of object shapes and geometries. They make attributes
Bottom Back Light OPT-FL series
Combined Bar Light Model -LIM -LIM -LIM -LIM V/.W V/.W V/.W V/.W V/.W V/.W V/.W V/.W Bottom Back Light -FL series Applied in the large area illumination, to enhance the high contrast silhouettes for high
LFV3-100SW LFV3-40SW. Transmittance rate (High) LED side. Move to LED side. LED side. Default position LFV3-CP-13RD. Wavelength/ color.
LFV series Refer to our website for product details. CCS LFV Use a search engine. Search You can also use your smartphone or cell phone. Provides diffused light evenly from LFV-RD LFV-SW LFV-BL -TP 2 H
!"#$"%&' ()#*+,-+.&/0(
!"#$"%&' ()#*+,-+.&/0( Multi Chip Modules (MCM) or Multi chip packaging Industry s first MCM from IBM. Generally MCMs are horizontal or two-dimensional modules. Defined as a single unit containing two
Obducat NIL 6. Nanoimprinting with NRF s NIL 6
Obducat NIL 6 Substrates: pieces to 6 inch, hard or soft Thermal cure with PMMA, MR I 7010 etc Alignment to about 3 microns Temperature to 300 HC Pressure 15 to 80 bars Resolution < 50 nm possible Up to
UV COBRA Slim Supplementary information
Supplementary information Key Features Design: Slim and compact Field adjustable: focussing distance and diffusers Chip-on-Board: Extreme brightness and high uniformity Crystal Clear Line Scan Images COBRA
flexible lighting technology
As a provider of lighting solutions for the Machine Vision Industry, we are passionate about exceeding our customers expectations. As such, our ISO 9001 quality procedures are at the core of everything
Coaxial Lights LFV3 series
Refer to our website for product details. CCS Use a search engine. Search You can also use your smartphone or cell phone. Provides diffused light evenly from the same axis as the camera -SW -SW -CP-18SW
Repair System for Sixth and Seventh Generation LCD Color Filters
NTN TECHNICAL REVIEW No.722004 New Product Repair System for Sixth and Seventh Generation LCD Color Filters Akihiro YAMANAKA Akira MATSUSHIMA NTN's color filter repair system fixes defects in color filters,
Copyright 2000 Society of Photo Instrumentation Engineers.
Copyright 2000 Society of Photo Instrumentation Engineers. This paper was published in SPIE Proceedings, Volume 4043 and is made available as an electronic reprint with permission of SPIE. One print or
Application Bulletin 240
Application Bulletin 240 Design Consideration CUSTOM CAPABILITIES Standard PC board fabrication flexibility allows for various component orientations, mounting features, and interconnect schemes. The starting
GOFC-S8H-500-F 2 H. Plastic fiber(pmma) / / 44 Standard:<200 Heat resistant:<500 Normal Great Great
Explanation & Technical Data GOFC-S8H-500-F 2 H P: Plastic Fiber G: Glass Fiber S: Silica Fiber - :Normal H: Heat resistant R: Randomized L: Lens S: Spot Lighting L: Line Lighting Furcate number R: Ring
Product Overview 2016/17
Product Overview 2016/17 iim AG - The company 4 LUMIMAX LED lighting 4 Service & Support 5 Website 5 Applications 6 LUMIMAX technology 8 Simple integration 10 LED area lights 14 LED ring lights 16 LED
Photolithography II ( Part 2 )
1 Photolithography II ( Part 2 ) Chapter 14 : Semiconductor Manufacturing Technology by M. Quirk & J. Serda Saroj Kumar Patra, Department of Electronics and Telecommunication, Norwegian University of Science
Mirtec MV-3 Series Desktop AOI Systems Now with 5 and 10 MP camera!
Mirtec MV-3 Series Desktop AOI Systems Now with 5 and 10 MP camera! MV-3 Series MIRTEC's MV-3 Series is the world's first generation of five camera Desktop AOI systems. The MV-3 Series offers advanced
Semiconductor Back-Grinding
Semiconductor Back-Grinding The silicon wafer on which the active elements are created is a thin circular disc, typically 150mm or 200mm in diameter. During diffusion and similar processes, the wafer may
BGA (Ball Grid Array)
BGA (Ball Grid Array) National Semiconductor Application Note 1126 November 2002 Table of Contents Introduction... 2 Package Overview... 3 PBGA (PLASTIC BGA) CONSTRUCTION... 3 TE-PBGA (THERMALLY ENHANCED
TouchBright Ver. 7.51
TouchBright Ver. 7.51 High-Performance LED Excitation System Efficient Use Long Lifetime Brightest LEDs Compact Design High-Performance Live Cell Instrument Co., LTD www.touchbrightled.com TouchBright
Precise Lighting for Machine Vision
Precise Lighting for Machine Vision NERLITE Precise lighting for Machine Vision The better the lighting solution, the better your machine vision system will perform. Accurate, reliable and repeatable performance
Time Delay Integration (TDI), The Answer to Demands for Increasing Frame Rate/Sensitivity? Craige Palmer Assistant Sales Manager
Time Delay Integration (TDI), The Answer to Demands for Increasing Frame Rate/Sensitivity? Craige Palmer Assistant Sales Manager Laser Scanning Microscope High Speed Gated PMT Module High Speed Gating
Passive Optical Components for Optical Fiber Transmission
Passive Optical Components for Optical Fiber Transmission Norio Kashima Artech House Boston London Contents Preface Part I Basic Technologies 1 Chapter 1 Introduction to Passive Optical Components 3 1.1
REC Peak Energy 72 Series Panel Appearance Specification - Q2
1 Glass (non-removable), scratches or unevenness on Visible at a distance glass which can not be removed by equal to B4 is permitted advised cleaning method. 2 Glass tape on glass 3 Glass Residual sealant
MetaBright Washdown Ring Light MB-RL205
The Metaphase offers high intensity, shadow-less illumination with five times the lifetime over fluorescents. Ring lights are essential for lighting specular or diffused surfaces. The MetaBright TM is
NELA Brüder Neumeister GmbH
Vision Inspection Systems NELA Brüder Neumeister GmbH Your Worldwide Partner for Automatic Optical Inspection and Sorting Systems see. control. automate. HISTORICAL MILESTONES 1938 Ernst and Bernhard Neumeister
UNIT 3 LIGHT AND SOUND
NIT 3 LIGHT AND SOUND Primary Colours Luminous Sources of Light Colours sources is divided Secondary Colours includes Illıminated Sources of Light LIGHT Illumination is form Travels in Spaces Shadow Reflection
A Revolution in Information Management
Conforms to SEMI Standards Upgraded with New Functions Suitable for Reading Dot Cell Codes A Revolution in Information Management Actual size Industry's smallest head (without lens) V530-R150E-2, V530-R150EP-2
Thin Film Resistor Integration into Flex-Boards
Thin Film Resistor Integration into Flex-Boards 7 rd International Workshop Flexible Electronic Systems November 29, 2006, Munich by Dr. Hans Burkard Hightec H MC AG, Lenzburg, Switzerland 1 Content HiCoFlex:
The History and Future of Measurement Technology in Sumitomo Electric
ANALYSIS TECHNOLOGY The History and Future of Measurement Technology in Sumitomo Electric Noritsugu HAMADA This paper looks back on the history of the development of measurement technology that has contributed
Chapter 2 The Study of Microbial Structure: Microscopy and Specimen Preparation
Chapter 2 The Study of Microbial Structure: Microscopy and Specimen Preparation 1 Lenses and the Bending of Light light is refracted (bent) when passing from one medium to another refractive index a measure
Optical Inspection Systems
Optical Inspection Systems Easy Braid s Desoldering Braid Easy Braid s Solder Soakers Easy Braid s Swabs Easy Braid s Wipes Easy Braid s Stencil Rolls EASY BRAID CO. Easy Braid Co. is a manufacturer of
An Introduction to Electronics Systems Packaging. Prof. G. V. Mahesh. Department of Electronic Systems Engineering
An Introduction to Electronics Systems Packaging Prof. G. V. Mahesh Department of Electronic Systems Engineering India Institute of Science, Bangalore Module No. # 02 Lecture No. # 08 Wafer Packaging Packaging
PCB Supplier of the Best Quality, Lowest Price and Reliable Lead Time. Low Cost Prototype Standard Prototype & Production Stencil PCB Design
The Best Quality PCB Supplier PCB Supplier of the Best Quality, Lowest Price Low Cost Prototype Standard Prototype & Production Stencil PCB Design Visit us: www. qualiecocircuits.co.nz OVERVIEW A thin
Measurement technology for inline quality inspection in plastics production. More Precision
Measurement technology for inline quality inspection in plastics production More Precision Sensors and measurement systems for plastics production Miniaturization and increased production speeds together
Photolithography I ( Part 1 )
1 Photolithography I ( Part 1 ) Chapter 13 : Semiconductor Manufacturing Technology by M. Quirk & J. Serda Bjørn-Ove Fimland, Department of Electronics and Telecommunication, Norwegian University of Science
Advanced High-Density Interconnection Technology
Advanced High-Density Interconnection Technology Osamu Nakao 1 This report introduces Fujikura s all-polyimide IVH (interstitial Via Hole)-multi-layer circuit boards and device-embedding technology. Employing
Applications of Maskless Lithography for the Production of Large Area Substrates Using the SF-100 ELITE. Jay Sasserath, PhD
Applications of Maskless Lithography for the Production of Large Area Substrates Using the SF-100 ELITE Executive Summary Jay Sasserath, PhD Intelligent Micro Patterning LLC St. Petersburg, Florida Processing
Technical Notes. Introduction. Optical Properties. Issue 6 July Figure 1. Specular Reflection:
Technical Notes This Technical Note introduces basic concepts in optical design for low power off-grid lighting products and suggests ways to improve optical efficiency. It is intended for manufacturers,
Stable reading performance by ultimate lighting system
1251 DPM 2D Code Reader SERIES Related Information General terms and conditions... F-3 Korea s KC-mark... P.1602 SAFETY USE MEASUREMENT HUMAN FA VISION DPM (Direct Part Marking) panasonic.net/id/pidsx/global
Vocabulary. Unit 9 Forms of Energy. ENERGY: The capacity for doing work.
Unit 9 Forms of Energy Main Idea: There are many forms of energy, including radiant energy and chemical energy. Energy can change form. ENERGY: The capacity for doing work. Heat, Light and Radiant Energy
WLP User's Guide. CMOS IC Application Note. Rev.1.0_03. ABLIC Inc., 2014
CMOS IC Application Note WLP User's Guide ABLIC Inc., 2014 This document is a reference manual that describes the handling of the mounting of super-small WLP (Wafer Level Package) for users in the semiconductor
The equipment used share any common features regardless of the! being measured. Electronic detection was not always available.
The equipment used share any common features regardless of the! being measured. Each will have a light source sample cell! selector We ll now look at various equipment types. Electronic detection was not
Chapter 2. Literature Review
Chapter 2 Literature Review 2.1 Development of Electronic Packaging Electronic Packaging is to assemble an integrated circuit device with specific function and to connect with other electronic devices.
Ultraviolet Lights UV2 series
Lights -LA H 2 (5 types) Diffused Diffused Lights series Applications --365-N CCS For quick access. Lights that use high output -LEDs --365-W H2-24-365 --365-W LDL-138X12-365-N Detecting seal material
Vision Lighting Seminar
Creators of Evenlite Vision Lighting Seminar Daryl Martin Midwest Sales & Support Manager Advanced illumination 734-213 213-13121312 dmartin@advill.com www.advill.com 2005 1 Objectives Lighting Source
Bob Willis Process Guides
What is a Printed Circuit Board Pad? What is a printed circuit board pad, it may sound like a dumb question but do you stop to think what it really does and how its size is defined and why? A printed circuit
Sensors for Automated Assembly
Home Sensors for Automated Assembly The typical multistation automated assembly system is equipped with myriad sensors. By John Sprovieri June 3, 2014 Assembly machines are dumb. They can only do what
TOOLKIT PART 4 MANUFACTURING PROCESSES
Understanding which manufacturing process has been used to make an object can help you identify its material as different materials are manufactured with different process. Different manufacturing processes
Eight Tips for Optimal Machine Vision Lighting
Eight Tips for Optimal Machine Vision Lighting Tips for Choosing the Right Lighting for Machine Vision Applications Eight Tips for Optimal Lighting This white paper provides tips for choosing the optimal
ACRYLITE. for Lighting Technologies
for Lighting Technologies A specialized material that is reliable and durable is one of the world s highest-quality and most versatile plastics. It can be manufactured with many different functional properties
Wide Range Mounter for the Next Decade
Wide Range Mounter for the Next Decade Wide Range Mounter for the Next Decade HIGH PRODUCTIVITY Optimizing PCB transportation paths for the highest productivity using Modular Conveyors Shuttle and dual
Welding Inspection Non-Destructive Testing Course Reference WIS 5
Welding Inspection Non-Destructive Testing Course Reference WIS 5 Non Destructive Testing A welding inspector should have a working knowledge of NDT methods and their applications, advantages and disadvantages.
Photonics West Contact us for a Stock or Custom Quote Today! Edmund Optics BROCHURE
Edmund Optics BROHURE Photonics West 2017 Product Highlights Beam Expanders Off-xis Parabolic Mirrors Right ngle Prisms ontact us for a Stock or ustom Quote Today! US: +1-856-547-3488 EUROPE: +44 (0) 1904
TH2 series. Flat Lights. TH2 Series. Comprehensive product lineup to satisfy all your needs. CCS Inc.
TH2 series Flat Lights Comprehensive product lineup to satisfy all your needs. CCS Inc. Table of Contents Application Examples P. TH2 series TH2 series type P. 5 TH2-PM series type P. 9 TH2 series type
Tape Automated Bonding
Tape Automated Bonding Introduction TAB evolved from the minimod project begun at General Electric in 1965, and the term Tape Automated Bonding was coined by Gerard Dehaine of Honeywell Bull in 1971. The
By: Louise Brown, PhD, Advanced Engineered Materials Group, National Physical Laboratory.
NPL The Olympus LEXT - A highly flexible tool Confocal Metrology at the NPL By: Louise Brown, PhD, Advanced Engineered Materials Group, National Physical Laboratory. www.npl.co.uk louise.brown@npl.co.uk
A Miniaturized Multi-Channel TR Module Design Based on Silicon Substrate
Progress In Electromagnetics Research Letters, Vol. 74, 117 123, 2018 A Miniaturized Multi-Channel TR Module Design Based on Silicon Substrate Jun Zhou 1, 2, *, Jiapeng Yang 1, Donglei Zhao 1, and Dongsheng
Collimated Backlights BL-CL
The Collimated Backlight Series is a high performance, uniform, and collimated light source for high precision silhouetting and transmissive applications. Using precision optics, these lights are collimated
Advances in stacked-die packaging
pg.10-15-carson-art 16/6/03 4:12 pm Page 1 The stacking of die within IC packages, primarily Chip Scale Packages (CSP) Ball Grid Arrays (BGAs) has evolved rapidly over the last few years. The now standard
Other Vision Sensors. Network-compatible Vision Sensor F500-C10-ETN F500-C15-ETN. The F500 Supports Quality Traceability
Other Vision Sensors Other Vision Sensors F210 Vision Sensor Helps save work with a flow menu method and macro function. F270 Vision Sensor Integrates OMRON's accumulated know-how and achieves super-highspeed
AH Auto-Darkening Welding Helmet User Manual. Made in China
AH7-220-0000 Auto-Darkening Welding Helmet User Manual Made in China 2016 TECHNICAL SPECIFICATIONS AH7-220-0000 Auto-Darkening Welding Helmet 2016 WARNING Please read all instructions before using the
Topic 1 - What is Light? 1. Radiation is the type of energy transfer which does not require... A matter B heat C waves D light
Grade 8 Unit 1 Test Student Class Topic 1 - What is Light? 1. Radiation is the type of energy transfer which does not require... A matter B heat C waves D light 2. Light-producing technologies, such as
Vision systems for the optical inspection of super thin glass
Born to see, destined for vision: 100% in-line inspection in glass production Vision systems for the optical inspection of super thin glass Super thin glass backs the trend towards increasingly flat and
Lithography in our Connected World
Lithography in our Connected World SEMI Austin Spring Forum TOP PAN P R INTING CO., LTD MATER IAL SOLUTIONS DIVISION Toppan Printing Co., LTD A Broad-Based Global Printing Company Foundation: January 17,
Optimizing throughput with Machine Vision Lighting. Whitepaper
Optimizing throughput with Machine Vision Lighting Whitepaper Optimizing throughput with Machine Vision Lighting Within machine vision systems, inappropriate or poor quality lighting can often result in
Innovations Push Package-on-Package Into New Markets. Flynn Carson. STATS ChipPAC Inc Kato Rd Fremont, CA 94538
Innovations Push Package-on-Package Into New Markets by Flynn Carson STATS ChipPAC Inc. 47400 Kato Rd Fremont, CA 94538 Copyright 2010. Reprinted from Semiconductor International, April 2010. By choosing
Refraction is the change in speed of a wave due to the wave entering a different medium. light travels at different speeds in different media
Refraction Refraction is the change in speed of a wave due to the wave entering a different medium light travels at different speeds in different media this causes light to bend as it passes from one substance
Market Survey for the F4E Diagnostics Team
Market survey on availability of engineering effort to (1) provide support on the preparation of build-to-print design specifications of the Diagnostics; (2) and to provide industrial expertise on the
CHAPTER 11: Testing, Assembly, and Packaging
Chapter 11 1 CHAPTER 11: Testing, Assembly, and Packaging The previous chapters focus on the fabrication of devices in silicon or the frontend technology. Hundreds of chips can be built on a single wafer,
vision sensors LIGHTING SPECIFICATIONS AND DRAWINGS
4020 Linz/ustria Pummererstr. 36 Tel.: +43-(0)70-7646-0* www.schmachtl.at vision sensors LIGHTING SPECIFICTIONS ND DRWINGS 2005-2 Copyright 2005, Cognex Corporation. ll information in this document is
No. Item Page BASIC SPECIFICATION 1.1 Mechanical Specification. 1.3 Outline Dimension 1.4 Block Diagram 1.5 Interface Pin ELECTRICAL CHARACTERISTICS
CONTENTS: No. Item Page BASIC SPECIFICATION 1.1 Mechanical Specification 1.3 Outline Dimension 1.4 Block Diagram 1.5 Interface Pin ELECTRICAL CHARACTERISTICS 2.3 AC Characteristics 10~12 OPTICAL CHARACTERISTICS
SNT Package User's Guide
(Small outline Non-leaded Thin package) [Target Packages] SNT-4A SNT-6A SNT-6A (H) SNT-8A SNT Package User s Guide Introduction This manual describes the features, dimensions, mountability, reliability,
Parallel Mode Confocal System for Wafer Bump Inspection
Parallel Mode Confocal System for Wafer Bump Inspection ECEN5616 Class Project 1 Gao Wenliang wen-liang_gao@agilent.com 1. Introduction In this paper, A parallel-mode High-speed Line-scanning confocal
TAIPRO Engineering. Speaker: M. Saint-Mard Managing director. TAIlored microsystem improving your PROduct
TAIPRO Engineering MEMS packaging is crucial for system performance and reliability Speaker: M. Saint-Mard Managing director TAIPRO ENGINEERING SA Michel Saint-Mard Administrateur délégué m.saintmard@taipro.be
Testing of Flexible Metamaterial RF Filters Implemented through Micromachining LCP Substrates. Jonathan Richard Robert Dean Michael Hamilton
Testing of Flexible Metamaterial RF Filters Implemented through Micromachining LCP Substrates Jonathan Richard Robert Dean Michael Hamilton Metamaterials Definition Metamaterials exhibit interesting properties
Techniques for Suppressing Adverse Lighting to Improve Vision System Success. Nelson Bridwell Senior Vision Engineer Machine Vision Engineering LLC
Techniques for Suppressing Adverse Lighting to Improve Vision System Success Nelson Bridwell Senior Vision Engineer Machine Vision Engineering LLC Nelson Bridwell President of Machine Vision Engineering
Description of the Method Developed for Dye Penetrant Analysis of Cracked Solder Joints
Description of the Method Developed for Dye Penetrant Analysis of Cracked Solder Joints Background The extension of cracks in solder joints after fatigue testing is usually evaluated using crosssectioning
EE 330 Lecture 11. Capacitances in Interconnects Back-end Processing
EE 330 Lecture 11 Capacitances in Interconnects Back-end Processing Exam 1 Friday Sept 21 Students may bring 1 page of notes HW assignment for week of Sept 16 due on Wed Sept 19 at beginning of class No
Polymer Plate Development Procedures. (800) or (802) (800)
Polymer Plate ment Procedures (800) 272-7764 or (802) 362-0844 www.epsvt.com 1 www.epsvt.com (800) 272-7764 Introduction Understanding Plate Making Polymer plates consist of a photosensitive material which
TWO DIMENSIONAL DESIGN CHAPTER 11: TEXTURE
TWO DIMENSIONAL DESIGN CHAPTER 11: TEXTURE Dr. Hatem Galal A Ibrahim 1 Definition Texture is one visual element which has been mentioned frequently but never fully discussed in the preceding chapters.
SMT Troubleshooting. Typical SMT Problems For additional process solutions, please refer to the AIM website troubleshooting guide
SMT Troubleshooting Typical SMT Problems For additional process solutions, please refer to the AIM website troubleshooting guide Solder Balling Solder Beading Bridging Opens Voiding Tombstoning Unmelted
User Manual. Digital Compound Binocular LED Microscope. MicroscopeNet.com
User Manual Digital Compound Binocular LED Microscope Model MD82ES10 MicroscopeNet.com Table of Contents i. Caution... 1 ii. Care and Maintenance... 2 1. Components Illustration... 3 2. Installation...
Dicing Through Hard and Brittle Materials in the Micro Electronic Industry By Gideon Levinson, Dicing Tools Product Manager
Dicing Through Hard and Brittle Materials in the Micro Electronic Industry By Gideon Levinson, Dicing Tools Product Manager A high percentage of micro electronics dicing applications require dicing completely
Laminate Based Fan-Out Embedded Die Technologies: The Other Option
Laminate Based Fan-Out Embedded Die Technologies: The Other Option Theodore (Ted) G. Tessier, Tanja Karila*, Tuomas Waris*, Mark Dhaenens and David Clark FlipChip International, LLC 3701 E University Drive
TOSHIBA E-STUDIO 166:
specialist's guide TOSHIBA E-STUDIO 166: A MODERN OFFICE PRINTING MULTIFUNCTION TOOL. PART 2 By VLADIMIR KAMENOV In this issue of RechargEast Magazine we are continuing the analysis of e-studio 166 copier,
Major Fabrication Steps in MOS Process Flow
Major Fabrication Steps in MOS Process Flow UV light Mask oxygen Silicon dioxide photoresist exposed photoresist oxide Silicon substrate Oxidation (Field oxide) Photoresist Coating Mask-Wafer Alignment
Titelfoto. Advanced Laser Beam Shaping - for Optimized Process Results and Quality Inspection in the PV Production - Maja Thies.
2010 LIMO Lissotschenko Mikrooptik GmbH www.limo.de Titelfoto Advanced Laser Beam Shaping - for Optimized Process Results and Quality Inspection in the PV Production - Maja Thies Photonics Key Technology
Beam Shaping and Simultaneous Exposure by Diffractive Optical Element in Laser Plastic Welding
Beam Shaping and Simultaneous Exposure by Diffractive Optical Element in Laser Plastic Welding AKL`12 9th May 2012 Dr. Daniel Vogler Page 1 Motivation: Quality and flexibility diffractive spot shaping
APPLICATION NOTE 6381 ORGANIC LAND GRID ARRAY (OLGA) AND ITS APPLICATIONS
Keywords: OLGA, SMT, PCB design APPLICATION NOTE 6381 ORGANIC LAND GRID ARRAY (OLGA) AND ITS APPLICATIONS Abstract: This application note discusses Maxim Integrated s OLGA and provides the PCB design and
Introduction. Lighting
&855(17 )8785(75(1'6,10$&+,1(9,6,21 5HVHDUFK6FLHQWLVW0DWV&DUOLQ 2SWLFDO0HDVXUHPHQW6\VWHPVDQG'DWD$QDO\VLV 6,17()(OHFWURQLFV &\EHUQHWLFV %R[%OLQGHUQ2VOR125:$< (PDLO0DWV&DUOLQ#HF\VLQWHIQR http://www.sintef.no/ecy/7210/
Optical Bus for Intra and Inter-chip Optical Interconnects
Optical Bus for Intra and Inter-chip Optical Interconnects Xiaolong Wang Omega Optics Inc., Austin, TX Ray T. Chen University of Texas at Austin, Austin, TX Outline Perspective of Optical Backplane Bus
USING SIGNATURE IDENTIFICATION FOR RAPID AND EFFECTIVE X-RAY INSPECTION OF BALL GRID ARRAYS
USING SIGNATURE IDENTIFICATION FOR RAPID AND EFFECTIVE X-RAY INSPECTION OF BALL GRID ARRAYS Gil Zweig Glenbrook Technologies, Inc. Randolph, New Jersey USA gzweig@glenbrooktech.com ABSTRACT Although X-ray
Introducing a revolutionary, printed LED panel, ideal for low-profile lighting applications.
Introducing a revolutionary, printed LED panel, ideal for low-profile lighting applications. The can be safely and easily cut to length for in-field customization and design. The simple addition of Nth-Connectors,
3M Contrast Enhancement Film. The. Clear. Advantage. High purity, optical-grade adhesive films for joining transparent materials
3M Contrast Enhancement Film The Clear Advantage High purity, optical-grade adhesive films for joining transparent materials 3 3M Contrast Enhancement Film Engineered to speed assembly, improve display
Technical Explanation for Displacement Sensors and Measurement Sensors
Technical Explanation for Sensors and Measurement Sensors CSM_e_LineWidth_TG_E_2_1 Introduction What Is a Sensor? A Sensor is a device that measures the distance between the sensor and an object by detecting
LED illumination for image processing and microscopy
illumination for image processing and microscopy Versatility, durability and good value are the key features of our lighting units. Exchangeable attachments, such as lenses and diffusers, optimise luminous
Chapter 11 Testing, Assembly, and Packaging
Chapter 11 Testing, Assembly, and Packaging Professor Paul K. Chu Testing The finished wafer is put on a holder and aligned for testing under a microscope Each chip on the wafer is inspected by a multiple-point