Broad range of lighting solutions

Transcription

1 Broad range of lighting solutions MORITEX and SCHOTT's has the most complete LED illumination portfolio available with the constant current controlled "MG-Wave Series" and constant voltage controlled "MCV-Light Series" providing support for the entire range of modern-day users in various image processing environments. LED Illumination Image processing total system solutions support Our total system solutions approach provides customers with the best performance & efficiency through consideration of the 3 essential imaging fields of illumination, lens, and peripherals. Selection of LED Illumination Making obscure and unrecognizable images become sharp and clear Our total system solutions meet a wide range of needs for image processing applications. MCV-Light Series NEW Constant Voltage Control System / V DC / Industrial Design with Metal Connectors The MCV-Light Series constant voltage control LED illumination products are V DC driven and can be controlled by proprietary APS LED controllers as well as other available industrial V power supplies. Over-driven strobing is also possible for instantaneous, high intensity illumination. This series can be used in various machine vision imaging environments providing a broad range of lighting solutions. MG-Wave Series Constant Current Control System / Extensive Product Variety / Unique, High End Solutions The MG-Wave Series is our original LED illumination product line designed with our patented highly sophisticated integrated constant current sensing control system that enables our LED controllers to identify the appropriate current value for each individual LED unit connected and control them separately. The constant current design successfully reduces heat generation to improve output intensity, efficiency, and stability. i-8

2 Selection flowchart Identify object & FOV Select camera, lens, and peripherals Choose LED configuration, type, and wavelength Choose LED controller (i.e. drive method) Test system for proof of concept Complete setup *Refer to Machine Vision General Catalog Lens MCV-Light MG-Wave LED Lineup Reference Table Illumination Type Direct Ring Illumination Low Angle Ring Illumination Shadowless Illumination Bar Illumination Square Bar Type Illumination Dome Illumination Simulated Coaxial Illumination Direct Backlighting (Chip Mount Type) Direct Backlighting (Discrete Type) Edge Type Backlighting Collimated Backlight Illumination High Brightness LED Light Line Line Illumination Diffuse Chip Type Bar Illumination High Power LED Spot Illumination Coaxial Illumination LED Spot Projector IR Illumination UV Illumination Variable RGB Illumination V DC Driven Controlled by proprietary APS LED controllers as well as other available industrial V power suppliers. Over-driven strobing and branched connection also available. Extensive Product Variety More than 350 models with low heat generation and high luminance efficiency MCV-Light Sereis R SQ RLA RLA-00 FR DR DSQ BA BAQ CX FL MG-Wave Series MDRL MLRL MSRL MSLL MSQL MBRL MDQL MDML MSCL MDBC MQFC MDBL MEBL MEBC MCBP MLNX SMT MLNL MBRC MCEP MCEC MCEL MSPP IR UV RGB V DC Input DIN Rail Mountable Analog -channel LED controller without external control 100-0V AC Input Analog & Digital Controllers with External Control Input Channel External Control 1-ch, -ch, & -ch models available; 3-ch available for MCEP Series MCV-Light MG-Wave MCV-Light MG-Wave MCV-Light MG-Wave DCV AC100V~0V ch 1ch, ch, ch N/A Analog (0-5V) Digital (Pararell/8bit) LED Controller Lineup Reference Analog LED Controllers for MCV-Light Series V DC, DIN rail mountable LED Controllers for MG-Wave Series Constant current sensing control system LED Controllers for MCEP/MSPP Series For high power LED spot illumination LED Illumination Selection of LED Illumination LED Controllers for MLNX Series Applicable lighting length: mm i-9

3 LED Illumination MC V- Light Series V DC Driven / Industrial Design with Metal Connectors MCV-Light Series MCV-Light Series employs the constant voltage control system that can be controlled not only by APS LED controllers but also by industry available V DC power supplies directly. Overdriven strobing for instantaneous high intensity illumination is also available. The series can support customer s various image processing environments with a broad range of lighting solutions. LED Controller for MCV-Light Series APS Direct Ring Illumination R / SQ Low Angle Ring Illumination RLA / RLA-00 Shadowless Illumination FR / DR / DSQ Bar Illumination BA Square Bar Type Illumination BAQ Simulated Coaxial Illumination CX Direct Backlights (Chip Mount Type) FL Options i-10

4 MC V- Light Series LED SAFETY STANDARD (CEI/IEC 671:006) Groups Definition and Emission limit Exempt Not more than W m -. Small source defined as one with <11 radian. Low Risk Not more than W m - Moderate Risk Not more than 00 W m - High Risk Higher than 00 W m - Lamp Classification based on IEC standards are applicable to LED lighting units. Criteria for classification is shown above. LEDs are narrow bandwidth light sources with emission levels based on "Blue light, small source" where the wavelength is from 300nm to 700nm. All MCV-Light Series products are considered to be in either the low risk or exempt group. CE RoHS CE Marking RoHS Directive i-11

5 MCV-Light Series Direct Ring Illumination R/SQ Series RoHS CE Direct Ring Illumination R Series SQ Series R / SQ Direct Ring Illumination: R Series High intensity, uniform direct, bright-field 360-degree lighting Explanation of Model Code R - X - Standard LED illumination for a wide range of applications External Internal Lighting Angle Square Ring Illumination: SQ Series Ring illumination with LEDs mounted vertically onto a planar substrate in a square chassis SQ - X X External Dimensions Length Width Internal Lineup of Direct Ring Type LEDs Model Power (W) Lineup of Square Ring Type LEDs Internal External Lighting Angle (mm) (mm) Weight (g) Product Code R-3X10-70R Red A-600 R-3X10-70B Blue A-60 R-3X10-70W White A-601 R-X18-65R Red A-603 R-X18-65B Blue A-605 R-X18-65W White A-60 R-50X8-75R Red A-606 R-50X8-75B Blue A-608 R-50X8-75W White A-607 R-70X35-90R Red A-609 R-70X35-90B Blue A-611 R-70X35-90W White A-610 R-90X30-80R Red A-61 R-90X30-80B Blue A-61 R-90X30-80W White A-613 R-90X50-70R Red A-615 R-90X50-70B Blue A-617 R-90X50-70W White A-616 R-10X60-50R Red A-618 R-10X60-50B Blue A-60 R-10X60-50W White A-619 Model Power (W) External Dimensions (mm) Length Width Internal Weight Product (g) Code SQ-56X56X30R Red A-776 SQ-56X56X30B Blue A-778 SQ-56X56X30W White A-777 Illumination Structure R Series SQ Series CCD Camera Lens Lens Object Object i-1

6 R-3X10-70R (B,W) R-X18-65R (B,W) ø10 -M3xmm Depth PCD 0 -M3 PCD0 ø18 -M3xmm Depth PCD 8 -M3 PCD ø (3.1) (ø) (6.8) 18 ø 65 (3.1) (ø) 500 (6.8) R-50X8-75R (B,W) R-70X35-90R (B,W) ø8 -M3xmm Depth PCD 0 -M3 PCD0 ø35 -M3xmm Depth PCD 50 -M3 PCD50 16 ø (3.1) R-90X30-80R (B,W) (ø) 500 ø30 -M3xmm Depth PCD 70 -M3 PCD70 (6.8) ø70 (6) (ø) 500 R-90X50-70R (B,W) 5 ø50 -M3xmm Depth PCD 70 -M3 PCD70 (6.8) Direct Ring Illumination 0 83 ø90 5 (3.1) (ø) 500 (6.8) 0 71 ø90 5 (3.1) (ø) 500 (6.8) (15.3) R / SQ R-10X60-50R (B,W) SQ-56X56X30R (B,W) ø60 -M3xmm Depth PCD 90 -M3 PCD90 38 ø30 -M3x3mm Tap Depth -M ø10 (15.6) (ø) 500 (6.8) (6.8) () (ø) 6 -Mx3mm Tap Depth -M Light Distribution Characteristics R-X18-65W R-70X35-90W R-90X50-70W WD=5 WD=10 WD=0 WD=30 WD=0 WD=35 WD=5 WD=60 WD=80 WD=100 SQ-56X56X30W WD=5 WD=35 WD=50 WD=65 WD= WD=5 WD=35 WD=5 WD=60 WD=80 i-13

7 MCV-Light Series R Series Sample Images Foreign Object in Paper Cup PCB Fabrication Inspection Direct Ring Illumination SQ Series Not Much Light at Short WD Full Light at Longer WD R / SQ Accessories Adapter Diffuser Polarizer Method of Mounting AD-Rxx R Series Used to mount the diffuser or polarizer onto the LED lighting. DF-Rxx DF-SQxx To be mounted in front of the LED lighting using the adapter. Used to soften the lighting output, so as to reduce the glare on specular surface. PL-Rxx PL-SQxx To be mounted in front of the LED lighting using the adapter. Use together with second polarizer(analyzer) to help reduce glare. LED Illumination Diffuser/Polarizer Adapter The adapter is used to hold the diffuser/ polarizer to the LED lighting. SQ Series Model Product Type Compatible Light Models Product Code AD-R3X10 Adapter R-3x10-70R/B/W A-81 DF-R3X10 Diffuser R-3x10-70 A-813 PL-R3X10 Polarizer R-3x10-70 A-81 AD-RX18 Adapter R-x18-65 A-815 DF-RX18 Diffuser R-x18-65 A-816 PL-RX18 Polarizer R-x18-65 A-817 AD-R50X8 Adapter R-50x8-75 A-818 DF-R50X8 Diffuser R-50x8-75 A-819 PL-R50X8 Polarizer R-50x8-75 A-80 AD-R70X35 Adapter R-70x35-90 A-81 DF-R70X35 Diffuser R-70x35-90 A-8 PL-R70X35 Polarizer R-70x35-90 A-83 AD-R90X50 Adapter R-90x50-70 A-8 DF-R90X50 Diffuser R-90x50-70 A-85 PL-R90X50 Polarizer R-90x50-70 A-86 AD-R10X60 Adapter R-10x60-50 A-87 DF-R10X60 Diffuser R-10x60-50 A-88 PL-R10X60 Polarizer R-10x60-50 A-89 DF-SQ56X56X30 Diffuser SQ-56x56x30 A-858 PL-SQ56X56X30 Polarizer SQ-56x56x30 A-859 Screws The given screws are used to hold the diffuser/polarizer to the LED lighting. LED Illumination Diffuser/ Polarizer i-1

8 Low Angle Ring Illumination RLA/RLA-00 Series RoHS CE RLA Series RLA-00 Series Low Angle Ring Illumination Low Angle Ring Illumination: RLA Series Reflection can be minimized by the low-angle, dark-field lighting configuration Ideal for imaging of uneven surfaces, eg. embossment and surface flaw detection Explanation of Model Code RLA - X - External Internal Lighting Angle RL A / RL A Zero Angle Ring Illumination: RLA-00 Series Indirect, horizontal 360-degree inner diameter illumination Used at a short WD to the test object Lineup of Low Angle Ring Type LEDs Model Power (W) Internal (mm) External Lighting Weight Angle (g) (mm) Product Code RLA-7X8-30R Red A-631 RLA-7X8-30B Blue A-633 RLA-7X8-30W White A-63 RLA-100X70-30R Red A-63 RLA-100X70-30B Blue A-636 RLA-100X70-30W White A-635 RLA-13X96-15R Red A-637 RLA-13X96-15B Blue A-639 RLA-13X96-15W White A-638 Lineup of Zero Angle Ring Type LEDs Model Power (W) Internal (mm) External Lighting Weight Product Angle (g) Code (mm) RLA-75X6-00R Red A-60 RLA-75X6-00B Blue A-6 RLA-75X6-00W White A-61 RLA-96X60-00R Red A-63 RLA-96X60-00B Blue A-65 RLA-96X60-00W White A-6 Illumination Structure RLA Series CCD Camera Object Lens Illuminating the Object from a Low Position RLA-00 Series CCD Camera Object Lens i-15

9 MCV-Light Series RLA-7X8-30R (B,W) RLA-100X70-30R (B,W) ø8 -M3xmm Depth PCD 60 -M3 PCD60 ø70 -M3xmm Depth PCD 8 -M3 PCD8 5 Low Angle Ring Illumination ø7 500 (6.8) 19 (3.1) (ø) 30 RLA-13X96-15R (B,W) 3-M3xmm Depth PCD 116 ø96 3-M3 PCD ø (3.1) (ø) (6.8) RL A / RL A ø (6.8) (3.1) (ø) RLA-75X6-00R (B,W) (15.3) RLA-96X60-00R (B,W) ø6 -M3xmm Depth PCD 56 ø60 -M3xmm Depth PCD80 -M3 PCD80 -M3 PCD ø75 (3.5) (ø) 500 (6.8) ø (6.8) (3.5) (ø) RLA-7X8-30W Light Distribution Characteristics RLA-100X70-30W RLA-13X96-15W WD=5 WD=15 WD=5 WD=35 WD=0 WD=5 WD=10 WD=0 WD=5 WD=30 WD=5 WD=15 WD=5 WD=30 WD= RLA-75X6-00W WD=5 WD=10 WD=15 WD=0 WD= RLA-96X60-00W WD=5 WD=10 WD=15 WD=0 WD=5 i-16

10 RLA Series Sample Images Chamfer Checking on Metal Ring RLA-00 Series Scratch on Glass Plate 1-Pin Connector CD Imprint Inspection Low Angle Ring Illumination Accessories RL A / RL A Diffuser Ring Method of Mounting DF-RLAxxx Used to create a relatively non-directional light. Reduces glare on specular surfaces. Easily mount onto Low-Angle Ring light. Diffuser Set Screws LED Illumination The diffuser is mounted to the inner side of the Low-Angle Ring Light by three set screws. Model Product Type Compatible Light Models Product Code DF-RLA7X8 Diffuser Ring RLA-7x8-30 A-830 DF-RLA100X70 Diffuser Ring RLA-100x70-30 A-831 DF-RLA13X96 Diffuser Ring RLA-13x96-15 A-83 i-17

11 MCV-Light Series Shadowless Illumination FR/DR/DSQ Series RoHS CE Shadowless Illumination DR Series FR Series FR / DR / DSQ Shadowless Ring Illumination: FR Series Diffuse, shadowless illumination* Optimal soft, uniform light for shiny surfaces Explanation of Model Code FR - DSQ Series External X Internal Shadowless Low Angle Ring Illumination: DR Series DR - X Shallow angle LED illumination that provides diffused, soft light Ideal for flaw or edge detection on reflective surfaces External Internal Square Shadowless Low Angle Illumination: DSQ Series Diffused illumination best suited for square shape objects, such as in BGA & QFP applications DSQ - X - External Dimensions Length Width Height of Lighting Surface Illumination Structure FR Series CCD Camera DR Series CCD Camera DSQ Series CCD Camera Lens Lens Lens Object Object Object i-18

12 Lineup of Shadowless Ring Type LEDs Model Power (W) Internal (mm) External (mm) Weight (g) Product Code FR-10X33R Red A-656 FR-10X33B Blue A-658 FR-10X33W White A-657 FR-15XR Red A-659 FR-15XB Blue A-661 FR-15XW White A-660 Lineup of Shadowless, Low Angle Ring Type LEDs Model Power (W) Internal (mm) External (mm) Weight (g) Product Code DR-100X73R Red A-67 DR-100X73B Blue A-67 DR-100X73W White A-673 DR-136X109R Red A-675 DR-136X109B Blue A-677 DR-136X109W White A-676 DR-180X153R Red A-678 DR-180X153B Blue A-680 DR-180X153W White A-679 Lineup of Shadowless, Low Angle Square Type LEDs Model Power (W) External Dimensions (mm) Length Width Height of Lighting Surface (mm) Weight (g) Product Code DSQ-8X8-15R Red A-789 DSQ-8X8-15B Blue A-791 DSQ-8X8-15W White A-790 DSQ-75X75-15R Red A-79 DSQ-75X75-15B Blue A-79 DSQ-75X75-15W White A-793 DSQ-96X96-15R Red A-795 DSQ-96X96-15B Blue A-797 DSQ-96X96-15W White A-796 DSQ-10X10-15R Red A-798 DSQ-10X10-15B Blue A-800 DSQ-10X10-15W White A-799 Shadowless Illumination FR / DR / DSQ i-19

13 MCV-Light Series FR-10X33R (B,W) FR-15XR (B,W) 1 ø (9) (ø) (6.8) 1 ø (9) (ø) (6.8) ø80(lighting Surface) ø33 ø103(lighting Surface) ø Shadowless Illumination FR / DR / DSQ 0 DR-100X73R (B,W) ø73 ø100 ø93.5(lighting Surface) 3-M3xmm Tap Depth on the Back PCD 70 3-M3 PCD70 -M3xmm Depth PCD 8 -M3 PCD8 500 (7.5) (ø) DR-180X153R (B,W) ø153 -M3xmm Depth PCD 16 (6.8) 0 DR-136X109R (B,W) ø109 ø136 ø19.5(lighting Surface) 3-M3xmm Tap Depth on the Back PCD 70 3-M3 PCD70 -M3xmm Depth PCD 10 -M3 PCD10 (7.5) (ø) 500 (6.8) -M3 PCD16 ø180 (7.5) (ø) 500 (6.8) 0 ø173.5(lighting Surface) DSQ-8X8-15R (B,W) DSQ-75X75-15R (B,W) M3x3mm Tap Depth M3x3mm Tap Depth -M3 3 -M (6.8) 30 15(Lighting Surface) 36 (Lighting Surface) () (ø) 30 15(Lighting Surface) (Lighting Surface) () (ø) 500 (6.8) (15.3) DSQ-96X96-15R (B,W) DSQ-10X10-15R (B,W) M3x3mm Tap Depth -M M3x3mm Tap Depth -M (Lighting Surface) (6.8) 8 (Lighting Surface) () (ø) 30 15(Lighting Surface) (6.8) 108 (Lighting Surface) () (ø) i-0

14 Light Distribution Characteristics FR-10X33W FR-15XW WD=0 WD=5 WD=30 WD=0 WD= WD=35 WD=0 WD=50 WD=60 WD= DR100X73W WD=5 WD=35 WD=5 WD=60 WD= DR-136X109W WD=0 WD=50 WD=60 WD=80 WD= DR-180X153W WD=50 WD=60 WD=80 WD=100 WD=10 Shadowless Illumination DSQ-8X8-15W DSQ-75X75-15W DSQ-10X10-15W FR / DR / DSQ WD=5 WD=10 WD=15 WD=0 WD=30 WD=5 WD=15 WD=5 WD=35 WD=5 WD=0 WD=30 WD=5 WD=60 WD=80 FR Series Sample Images DR Series CD Inspection DSQ Series OCR on Brushed Metal Surface Cap Inspection Silkscreen Printing Verification for Remote Control Connector Inspection Ink Cartridge Print Head Inspection i-1

15 MCV-Light Series Bar Illumination RoHS CE BA Series Bar Illumination BA High-intensity LED block array Can be directed at any angle to the surface for either direct or optimal oblique lighting Explanation of Model Code BA - X Lighting Area Dimensions Length Width Model Power (W) Lighting Area Dimensions (mm) Length Width Weight (g) Product Code BA-X15R Red A-691 BA-X15B Blue A-693 BA-X15W White A-69 BA-7X7R Red A-69 BA-7X7B Blue A-696 BA-7X7W White A-695 BA-8X15R Red A-697 BA-8X15B Blue A-699 BA-8X15W White A-698 BA-130X15R Red A-700 BA-130X15B Blue A-70 BA-130X15W White A-701 Illumination Structure CCD Camera Lens Object i-

16 BA-X15R (B,W) BA-7X7R (B,W) -Mxmm Tap Depth (Including Opposite Face) -M ( ) (Lighting Area) 5 7 (Lighting Area) (10) (ø) -Mxmm Tap Depth -M 500 (6.8) 9 7(Lighting Area) (Lighting Area) Mxmm Tap Depth -M 500 (6.8) (10.7) (ø) -M3xmm Tap Depth -M3 -M3xmm Tap Depth -M3 BA-8X15R (B,W) BA-130X15R (B,W) 17 15(Lighting Area) -Mxmm Tap Depth (Including Opposite Face) -M ( ) (Lighting Area) (ø) (10) -M3xmm Tap Depth -M3 -Mxmm Tap Depth -M 500 (6.8) (Lighting Area) -Mxmm Tap Depth (Including Opposite Face) -M ( ) (Lighting Area) -M3xmm Tap Depth -M3 -Mxmm Tap Depth -M View A (ø) (10) 500 (6.8) A Bar Illumination BA BA-7X7W Light Distribution Characteristics BA-8X15W BA-130X15W WD=35 WD=5 WD=60 WD=80 WD=100 WD=5 WD=35 WD=5 WD=60 WD=80 WD=35 WD=50 WD=60 WD=80 WD=110 Sample Images Character on Flexible Ribbon Cable Silkscreen Printing on Faceplate Accessories Diffuser Polarizer Method of Mounting DF-BAxxx To be mounted in front of the LED lighting using the screws provided. Used to soften the lighting output, so as to reduce the glare on specular surface. PL-BAxxx To be mounted in front of the LED lighting using the screws provided. Use together with second polarizer (analyzer) to help reduce glare. LED Illumination Diffuser/ Polarizer Model Product Type Compatible Light Models Product Code DF-BAX15 Diffuser BA-x15 A-833 PL-BAX15 Polarizer BA-x15 A-83 DF-BA7X7 Diffuser BA-7x7 A-835 PL-BA7X7 Polarizer BA-7x7 A-836 DF-BA8X15 Diffuser BA-8x15 A-837 PL-BA8X15 Polarizer BA-8x15 A-838 DF-BA130X15 Diffuser BA-130x15 A-839 PL-BA130X15 Polarizer BA-130x15 A-80 Screws i-3

17 MCV-Light Series Square Bar Type Illumination RoHS CE BAQ Series Square Bar Type Illumination BAQ Explanation of Model Code high-intensity bar LED arrangement Direct & oblique lighting from adjustable lighting angles BAQ - X External Dimensions Length Width Sample Images QFP Solder Inspection SSOP Pre-cut IC Package Inspection Illumination Structure CCD Camera Model Power (W) Dimensions (mm) Length Width Internal Weight (g) Product Code BAQ-108X108R Red A-713 BAQ-108X108B Blue A-715 BAQ-108X108W White A-71 BAQ-18X18R Red A-716 BAQ-18X18B Blue A-718 BAQ-18X18W White A-717 BAQ-00X00R Red A-719 BAQ-00X00B Blue A-71 BAQ-00X00W White A-70 Object Lens i-

18 BAQ-108X108R (B,W) BAQ-18X18R (B,W) CH3 60 CH 60 (ø) -Mø 500 (6.8) CH1 A View A CH CH (ø) 500 (6.8) CH1 A View A 90 CH BAQ-00X00R (B,W) 30 3 CH [Detail View of Lighting Unit] [ ] 15(Lighting Area) (ø) 7 (Lighting Area) -Mx3mm Tap Depth -M 3 A Mø CH [Detail View of Lighting Unit] [ ] 15(Lighting Area) 8(Lighting Area) 87 -Mx3mm Tap Depth -M 3 Square Bar Type Illumination CH (6.8) CH1 [Detail View of Lighting Unit] [ ] View A BAQ 90 -M CH 15(Lighting Area) 130(Lighting Area) 135 -Mx3mm Tap Depth -M 3 Light Distribution Characteristics BAQ-108X108W WD=10 WD=0 WD=30 WD=0 WD= BAQ-18X18W WD=0 WD=0 WD=60 WD=80 WD= BAQ-00X00W WD=0 WD=60 WD=80 WD=100 WD= Accessories Diffuser Polarizer Method of Mounting DF-BAQxxx To be mounted in front of the LED lighting using the screws provided. Used to soften the lighting output, so as to reduce the glare on specular surface. PL-BAQxxx To be mounted in front of the LED lighting using the screws provided. Use together with second polarizer (analyzer) to help reduce glare. LED Illumination Diffuser/ Polarizer Screws Model Product Type Compatible Light Models Remarks Product Code DF-BAQ108X108 Diffuser BAQ-108x108 A-81 PL-BAQ108X108 Polarizer BAQ-108x108 Two-piece set (horizontal/vertical ea.) A-8 DF-BAQ18X18 Diffuser BAQ-18x18 A-83 PL-BAQ18X18 Polarizer BAQ-18x18 Two-piece set (horizontal/vertical ea.) A-8 DF-BAQ00X00 Diffuser BAQ-00x00 A-85 PL-BAQ00X00 Polarizer BAQ-00x00 Two-piece set (horizontal/vertical ea.) A-86 i-5

19 MCV-Light Series Simulated Coaxial Illumination RoHS CE CX Series Simulated Coaxial Illumination CX Highly uniform pseudo-coaxial lighting Designed for use with our telecentric MML Series and other lenses without built-in coaxial illumination Explanation of Model Code CX - X X External Dimensions Length Width Height Illumination Structure Model Power (W) External Dimensions (mm) Length Width Height Weight (g) Product Code CX-75X6X0R Red A-757 CX-75X6X0B Blue A-759 CX-75X6X0W White A-758 CX-9X60X58R Red A-760 CX-9X60X58B Blue A-76 CX-9X60X58W White A-761 CX-10X8X79R Red A-763 CX-10X8X79B Blue A-765 CX-10X8X79W White A-76 CCD Camera Object i-6

20 CX-75X6X0R (B,W) CX-9X60X58R (B,W) 6(Lighting Surface) ( ) 6 8 (Lighting Surface) ( ) 75 (ø) 500 (6.8) 3(Lighting Surface) ( ) (Lighting Surface) ( ) 9 (ø) 500 (6.8) 30 (3.6) 15 0 (3.6) Mxmm Tap Depth -M CX-10X8X79R (B,W) (Lighting Surface) 60 ( ) 8 50 (Lighting Surface) 79 ( ) 80 (3.6) (ø) (6.8) A View A 3 -Mxmm Tap Depth -M Simulated Coaxial Illumination -Mxmm Tap Depth -M Light Distribution Characteristics CX CX-75X6X0W CX-9X60X58W CX-10X8-79W WD=10 WD=15 WD=0 WD=30 WD= WD=15 WD=0 WD=30 WD=0 WD= WD=0 WD=30 WD=5 WD=60 WD=80 Sample Images Screw Head Inspection Glass Bottle Opening Accessories Polarizer Light Control Film Method of Mounting PL-CXxxx To be mounted in front of the LED lighting using the screws provided. Use together with second polarizer (analyzer) to help reduce glare. LC-CXxxx To be mounted inside the coxial lighting. This will make the coxial lighting produce a more collimated light, thus enhance the ability to see more surface defects. Light Control Film Detail view 1. Peel protective film off Light Control Film. Insert Light Control Film into groove of illumination. 3. Optional cover fixed by screws. Model Product Type Compatible Light Models Product Code LC-CX75X6X0 Light Control Film CX-75x6x0 A-85 PL-CX75X6X0 Polarizer CX-75x6x0 A-853 LC-CX9X60X58 Light Control Film CX-9x60x58 A-85 PL-CX9X60X58 Polarizer CX-9x60x58 A-855 LC-CX10X8X79 Light Control Film CX-10x8x79 A-856 PL-CX10X8X79 Polarizer CX-10x8x79 A-857 i-7

21 MCV-Light Series Direct Backlights (Chip Mount Type) RoHS CE Direct Backlights (Chip Mount Type) FL Series FL Explanation of Model Code Densely packaged chip LEDs in thin chassis (10mm or 15mm) Provides diffuse area lighting FL - X Lighting Surface Dimensions Length Width Model Power (W) Lighting Surface Dimensions (mm) External Length Width Length Width Thickness Weight (g) Product Code FL-7X7R Red A-73 FL-7X7B Blue A-73 FL-7X7W White A-733 FL-51X51R Red A-735 FL-51X51B Blue A-737 FL-51X51W White A-736 FL-63X60R Red A-738 FL-63X60B Blue A-70 FL-63X60W White A-739 FL-83X75R Red A-71 FL-83X75B Blue A-73 FL-83X75W White A-7 FL-100X100R Red A-7 FL-100X100B Blue A-76 FL-100X100W White A-75 Illumination Structure CCD Camera Lens Object Chip LED i-8

22 FL-7X7R (B,W) FL-51X51R (B,W) 7 (Lighting Surface) (3.1) (ø) (6.8) (Lighting Surface) (5.1) (ø) (6.8) 0 FL-63X60R (B,W) (Lighting Surface) 63 (Lighting Surface) ø (6.8) 60 (Lighting Surface) 70 (5.6) 1 (ø) 50 -ø3.5 FL-100X100R (B,W) (Lighting Surface) (5.6) (ø) (6.8) (15.3) (Lighting Surface) (Lighting Surface) 0 -ø FL-83X75R (B,W) (6.8) 83(Lighting Surface) 95 (5.6) (ø) ø.5 (15.3) Direct Backlights (Chip Mount Type) (Lighting Surface) 80 FL -ø FL-7X7W Light Distribution Characteristics 1. FL-63X60W Sample Images FL-83X75W WD= WD= FL-100X100W WD= WD=550 Cutter Disc Roundness Check Candle Size Measurement Accessories Light Control Film LC-FLxxx To be mounted on top of the LED lighting using the screws provided. To collimate the light from the flat light so as to produce a sharper edged image. Method of Mounting New Screws Light Control Film LED Illumination 1. Remove the existing screws. Place the Light Control Film on top of the diffuser plate 3. Used the set of new screws pack together with the film and mount the film onto the flat light Model Product Type Compatible Light Models Remarks Product Code LC-FL7X7 Light Control Film FL-7x7 Two-piece set (horizontal/vertical ea.) A-87 LC-FL51X51 Light Control Film FL-51x51 Two-piece set (horizontal/vertical ea.) A-88 LC-FL63X60 Light Control Film FL-63x60 Two-piece set (horizontal/vertical ea.) A-89 LC-FL83X75 Light Control Film FL-83x75 Two-piece set (horizontal/vertical ea.) A-850 LC-FL100X100 Light Control Film FL-100x100 Two-piece set (horizontal/vertical ea.) A-851 i-9

23 MCV-Light Series LED Controller APS Series RoHS CE LED Controller APS Explanation of Model Code V DC Input DIN rail mountable APS - - Up to 30W over available, individually adjustable channels A:Analog PS:Power Supply Input / Output Channel Model Output Voltage Output Current Output Power APS-D/D-B channel output max. V ± % for each channel (Connects to all MCV-Light series only) 1 channel max.1.5a /Total max.1.5a Max.30W Efficiency 80% Input Voltage DCV ±10% Input Current Operating Temperature/ Humidity Output System Output Control System External Light Control Output ON/OFF Function Error Output Cooling System Installation Weight 1.6A (Input Voltage is V, Ambient Temperature is 5 C) 0 C to 5 C: Liner Decrease Down to 80%RH at 31 C and 50%RH at 0 C DC Continuous output Constant voltage control (variable voltage) Not available Not available Not available Natural cooling by air DIN rail/operation panel faces to front Approximately 50g Product Code A APS-D/D- (17.5) 85 (9.7) 35 (7.5) (9.6) (5) 95 (55) (11.6) 11 7 (35) (37.5) i-30

24 Cable ECB, BCB Series Extension Cable (M1) - ECB-X000R PART NO. ECB-1000R ECB-000R ECB-3000R ECB-5000R Item Description Extension Cable, M1 to M1, 1000mm Extension Cable, M1 to M1, 000mm Extension Cable, M1 to M1, 3000mm Extension Cable, M1 to M1, 5000mm Branch Cable - way - BCB-X000R- 1000mm PART NO. BCB-000R- BCB-3000R- BCB-5000R- Item Description Branch Cable, M1 to M1, 000mm, -way Branch Cable, M1 to M1, 3000mm, -way Branch Cable, M1 to M1, 5000mm, -way Cable Branch Cable - way - BCB-X000R- 1000mm ECB, BCB PART NO. BCB-000R- BCB-3000R- BCB-5000R- Item Description Branch Cable, M1 to M1, 000mm, -way Branch Cable, M1 to M1, 3000mm, -way Branch Cable, M1 to M1, 5000mm, -way LED Spectral Characteristics The diagrams below illustrate the spectral characteristics of major LEDs used in the MCV-Light Series. We can also manufacture other lighting devices with different wavelengths. Please feel free to contact us. Relative Luminescence Intensity (%) White Ta=5ºC Blue Ta=5ºC Red IF=0mA IF=0mA Wavelength (nm) Relative Luminescence Intensity (%) Wavelength (nm) Relative Luminescence Intensity (%) Ta=5ºC IF=0mA Wavelength (nm) i-31