Bottom Back Light OPT-FL series
|
|
|
- Lillian Rogers
- 5 years ago
- Views:
Transcription
1 Combined Bar Light Model -LIM -LIM -LIM -LIM V/.W V/.W V/.W V/.W V/.W V/.W V/.W V/.W Bottom Back Light -FL series Applied in the large area illumination, to enhance the high contrast silhouettes for high speed machine -LIM -LIM -LIM -LIM -Ø Length-mm Emitting surfa ce -Ø Length-mm -Ø Length-mm. -Ø Length-mm The dimension is from * to *mm other size can be customized Available color is red, blue, green, white size and color combined can be customized Illumination area & uniformity Keep the same uniformity for different illumination area size Uniformity of large size (mmxmm) Grey value Illumination area(mmxmm) (pixel) Grey value (pixel) Use CCD camera to grab the picture and analysis the grey value, above drawing is the average grey value *Above data is just for reference Measurement inspection of mechanical components Inspection of IC pins and electronic components Inspection of transparent film Detect scratching on transparent objects Note:The structure picture is only for your reference LED panel PCB -FL bottom Back Light Highly scattering diffuser Structure display and illumination picture FPCB circuit inspection Steel part measurement Bearing ball exist detection
2 Bottom Back Light Bottom Back Light Model Emitting Emitting mode surface -FL V/.W V/.W x -FL V/.W V/.W x Model -FL -FL V/.W V/.W V/.W V/.W Emitting mode Emitting surface x x -FL -FL -FL -FL -FL -FL -FL -FL -FL -FL -FL -FL -FL -FL -FL -FL -FL V/.W V/.W V/.W V/.W V/.W V/.W V/.W V/.W V/.W V/.W V/.W V/.W V/.W V/.W V/.W V/.W V/.W V/.W V/.W V/.W V/.W V/.W V/.W V/.W V/.W V/.W x x x x x x x x x x x x x -FL -FL -FL -FL -FL -FL -FL -FL -FL -FL V/.W V/.W V/.W V/.W V/.W V/.W V/.W V/.W V/.W V/.W V/.W V/.W V/.W V/.W V/.W V/.W V/.W V/.W V/.W V/.W x x x x x x x x x x -Ø. -Ø -Ø. -Ø -FL -FL -FL -FL -Ø. 贯穿 Ø. -Ø -Ø. -Ø. -FL -FL -FL -FL -FL -FL - Ø. Length mm - Ø. - Ø. -Ø. -FL -Ø. -Ø. -Ø. -FL -FL -FL Emiiting surface - Ø. -M -Ø. -FL - Ø. -FL -FL -FL -FL Emiting surface Emiting surface -Ø.. -Ø. -Ø. -Ø. -FL -FL -FL -FL -Ø. -Ø. -Ø.
3 -FLC series Thin depth design for easy installation; can be customized as inquired; Can be used as front light when open a hole in the middle. Model -FLC V/.W V/.W -FLC V/.W V/.W -FLC V/.W V/.W -FLC V/.W V/.W Emitting mode x x x x -FLC V/.W V/.W x -FLC V/.W V/.W x -FLC V/.W V/.W x -FLC V/.W V/.W x -FLC V/.W V/.W x -FLC V/.W V/.W x -FLC V/.W V/.W x -FLC V/.W V/.W x -FLC V/.W V/.W x -FLC V/.W V/.W x -FLC V/.W V/.W x -FLC V/.W V/.W x Ultra thin design, the thinness can be up to mm, mm Dimensional drawings -FLC -FLC -FLC -FLC Customized size can be made, even the large size required Illumination area size is from *mm to *mm other size can be customized size and color combined can be customized Uniformity drawing Grey value Several times dispersion making the part and whole image uniformity (pixel). -Ø. -M -FLC -FLC -FLC -Ø -Ø -FLC Use CCD camera to grab the picture and analysis the grey value, above drawing is the average grey value *Above data is just for reference Note:The structure picture is only for your reference -Ø. -Ø. -Ø -Ø. The identification and inspection on the large square mechanical or electronic parts The measurement inspection of perspective LED defects inspection Diffusing part PCB -FLC -FLC -FLC -FLC -FLC side back light LED chips Diffuse layer Scattering coating -Ø -FLC -FLC -FLC -Ø -Ø. -Ø -FLC -Ø. -Ø. -Ø. 贯穿 Ø -Ø. 贯穿 Ø Battery size measurement Metal part inspection Steel tube outer diameter measurement
4 Front Back Light -FLK series New Front back light can be used as front light for the big FOV with even illumination Model Luminous mode -FLK V/.W V/.W Side lighting x -FLK V/.W V/.W Side lighting x -FLK V/.W V/.W Side lighting x -FLK V/.W V/.W Side lighting x -FLK V/.W V/.W Side lighting x -FLK V/.W V/.W Side lighting x -FLK V/.W V/.W Side lighting x -FLK V/.W V/.W Side lighting x -FLK V/.W V/.W Side lighting x Front Back Light Back light as front light Large size uniformity illumination, customized size can be made standard size can be made from mm to mm Other size can be customized LED color: red, blue, green and white colors can be optionally combined -FLK -FLK -FLK -ØThrough Ø. -Ø. -Ø.. -FLK -Ø. -FLK -FLK -FLK -FLK Front back light -Ø. -Ø.. -Ø. -Ø. Note:This structure picture is only for your reference -FLK Big PCB parts inspection and recognition Big electronic part surface letter inspection The mark point position Diffuser -Ø. -FLK front back light Glue circle Back light plate PCB and LED FPC plate surface inspection Remote controller button inspection Mobile phone accessories integrity inspection Remote controller letters inspection
5 High Power Back Light -FLG series New Using high power LED and heat transfer material to make the high brightness back light, it is good for short exposure application Model Luminous mode -FLG V/.W V/.W Bottom emission x -FLG V/.W V/.W Bottom emission x -FLG V/.W V/.W Bottom emission x -FLG V/.W V/.W Bottom emission x High Power Back Light -FLG -FLG -FLG -FLG With high intensity and uniformity, size can be customized freely Intensity is. times higher than standard one Length.. -M... Length.. -M... Length.. -M -M.... Length... X X. X X.. standard size can be made from mm to mm other size can be customized LED color: red, blue, green and white colors can be optionally combined Intensity data intensity(lux) FLG series FL series WD(mm) *above data is just for reference Note:This structure picture is only for your reference High speed, short exposure application Mechanical part measurement Electronic part and IC outer shape inspection Diffuser -FLG High power LED PCB outside high power back light Screw size measurement Screw outer circle and depth measurement The circle of disk measurement
6 Parallel Back Light Parallel Back Light -FLP series Larger emitting surface parallel back light, comparing -FP, -FLP is thinner Model -FLP x V/.W V/.W -FLP x V/.W V/.W -FLP x V/.W V/.W -FLP x V/.W V/.W -FLP x V/.W V/.W -FLP x V/.W V/.W -FLP x V/.W V/.W -FLP x V/.W V/.W -FLP x V/.W V/.W -FLP x V/.W V/.W -FLP x V/.W V/.W -FLP x V/.W V/.W -FLP is thinner than -FP series,easy installation,space-efficient -FLP -FLP -FLP -Ø.Through -Ø.Through -FLP X= -FLP -Ø. Through -FLP -Ø. Through -Ø. Through Diffuser LED defects inspection -FLP Parallel film Dust proof plate - Ø. Through -FLP The measurement inspection of perspective -Ø. Through - Ø. Through -Ø. Through The identification and inspection of the large square mechanical or electronic parts -FLP Note:This structure picture is only for your reference X= image result of -FLP series -FLP -Ø.Through image result of -FL series and size can be customized standard size can be made from mm to mm Other size can be customized LED color: red, blue, green and white colors can be optionally combined -FLP Replacement of back light, applied in high-accuracy,large square product measurement -FLP -Ø.Through Length-mm -Ø.Through -FLP parallel back light LED Medical bottle mouth defects inspection Wafer surface defects inspection
APPLICATIONS FOR TELECENTRIC LIGHTING
APPLICATIONS FOR TELECENTRIC LIGHTING Telecentric lenses used in combination with telecentric lighting provide the most accurate results for measurement of object shapes and geometries. They make attributes
TH2 series. Flat Lights. TH2 Series. Comprehensive product lineup to satisfy all your needs. CCS Inc.
TH2 series Flat Lights Comprehensive product lineup to satisfy all your needs. CCS Inc. Table of Contents Application Examples P. TH2 series TH2 series type P. 5 TH2-PM series type P. 9 TH2 series type
Achieving 100,000 : 1 contrast measurement
NEW Spectroradiometer Highly precise spectral radiance/chromaticity measurement possible from 0.003 cd/m 2 Achieving 100,000 : 1 contrast measurement World's top level capability to detect extremely low
Advanced 3D Optical Profiler using Grasshopper3 USB3 Vision camera
Advanced 3D Optical Profiler using Grasshopper3 USB3 Vision camera Figure 1. The Zeta-20 uses the Grasshopper3 and produces true color 3D optical images with multi mode optics technology 3D optical profiling
Before you start Have you chosen your LED(s)? We offer a wide variety of LED products to choose from including standard LEDs and LED arrays:
Before you start Have you chosen your LED(s)? We offer a wide variety of LED products to choose from including standard LEDs and LED arrays: These are your standard throughhole and surface mounted LEDs.
Time Delay Integration (TDI), The Answer to Demands for Increasing Frame Rate/Sensitivity? Craige Palmer Assistant Sales Manager
Time Delay Integration (TDI), The Answer to Demands for Increasing Frame Rate/Sensitivity? Craige Palmer Assistant Sales Manager Laser Scanning Microscope High Speed Gated PMT Module High Speed Gating
True 2 ½ D Solder Paste Inspection
True 2 ½ D Solder Paste Inspection Process control of the Stencil Printing operation is a key factor in SMT manufacturing. As the first step in the Surface Mount Manufacturing Assembly, the stencil printer
Coaxial Lights LFV3 series
Refer to our website for product details. CCS Use a search engine. Search You can also use your smartphone or cell phone. Provides diffused light evenly from the same axis as the camera -SW -SW -CP-18SW
CS-2000/2000A. Spectroradiometer NEW
Spectroradiometer NEW CS-000/000A The world's top-level capability spectroradiometers make further advances with addition of second model to lineup. World's top level capability to detect extremely low
Eight Tips for Optimal Machine Vision Lighting
Eight Tips for Optimal Machine Vision Lighting Tips for Choosing the Right Lighting for Machine Vision Applications Eight Tips for Optimal Lighting This white paper provides tips for choosing the optimal
The arrangement of the instrument is illustrated in the diagrams opposite.
Sectional view Plan view General description This is a direct reading instrument for measuring transmission densities of ordinary photographic negatives. Visual observation of the photometric fields is
GOFC-S8H-500-F 2 H. Plastic fiber(pmma) / / 44 Standard:<200 Heat resistant:<500 Normal Great Great
Explanation & Technical Data GOFC-S8H-500-F 2 H P: Plastic Fiber G: Glass Fiber S: Silica Fiber - :Normal H: Heat resistant R: Randomized L: Lens S: Spot Lighting L: Line Lighting Furcate number R: Ring
Ultraviolet Lights UV2 series
Lights -LA H 2 (5 types) Diffused Diffused Lights series Applications --365-N CCS For quick access. Lights that use high output -LEDs --365-W H2-24-365 --365-W LDL-138X12-365-N Detecting seal material
MML-High Resolution 5M Series
Fixed Magnification Series -High Resolution 5M Series High-resolution models that possess the best contrast and NA of all Series. Image acquisition with even higher image quality is realized by combining
Spectroradiometer CS-2000/2000A. The world's top-level capability spectroradiometers make further advances with addition of second model to lineup.
Spectroradiometer /000A The world's top-level capability spectroradiometers make further advances with addition of second model to lineup. World's top level capability to detect extremely low luminance
PAINT BORER 518 MC PAINTXPLORER 548
PAINT BORER 518 USB PAINT BORER 518 MC PAINTXPLORER 548 PAINT BORER 518 USB Thickness measurements in accordance with the standardised wedge cut method PAINT BORER 518 MC PAINTXPLORER 548 testing equipment
Repair System for Sixth and Seventh Generation LCD Color Filters
NTN TECHNICAL REVIEW No.722004 New Product Repair System for Sixth and Seventh Generation LCD Color Filters Akihiro YAMANAKA Akira MATSUSHIMA NTN's color filter repair system fixes defects in color filters,
LARGE SELECTION LASER MARKER. FAYb CO2. Laser Marker Selection Guide LASER MARKER LP-S/SW SERIES LP-300 SERIES LP-M/MA SERIES LP-V/W SERIES
Laser Marker Selection Guide LARGE SELECTION LASER MARKER FAYb LASER MARKER LP-M/MA SERIES LP-Z SERIES LP-S/SW SERIES LP-RF SERIES LP-V/W SERIES CO2 LASER MARKER LP-RC SERIES LP-400 SERIES LP-GS SERIES
Optimizing throughput with Machine Vision Lighting. Whitepaper
Optimizing throughput with Machine Vision Lighting Whitepaper Optimizing throughput with Machine Vision Lighting Within machine vision systems, inappropriate or poor quality lighting can often result in
X-SCOPE Ultra large FOV micro video colorimeter
To obtain more information on any of the products below go to our new newsletter page on the website and follow the links, send an email to sales@alrad.co.uk or call 01635 30345. As this is our last newsletter
IR LED Illuminator OW806 OW809 OW812 OW815 IP-138TC5 IP-158SC3 IP-137LP54 IP-007LFP54. Dimensions (mm) LED Type. Angle and Max Input
PRODUCT OVERVIEW January 2014 Pictures Max Distance Angle and Max Distance Input LED Type Wavelength IP Weight Dimensions (mm) OW806 160m 15º - 160m 20º - 130m 30º - 100m 40º - 80m 50º - 60m 60º - 40m
Technical Notes. Introduction. Optical Properties. Issue 6 July Figure 1. Specular Reflection:
Technical Notes This Technical Note introduces basic concepts in optical design for low power off-grid lighting products and suggests ways to improve optical efficiency. It is intended for manufacturers,
LED Lighting. Direct ring type. LED Lighting. Trunk cable. LED lighting. Power source MRL-16/MRLW-16 MRL-31A-L MRL-36/MRLW-36 / MRLB-36
System configuration LED lighting (P54 to 58) Trunk cable + + (P59) Power source (P59) MRC-01 / 02 / 03 MLED-A12010L MLED-B12025LRD * Trunk cable is not necessary when using MLED-C12025WLR. Long life,
Our Vision... Tomorrow s Innovation
Our Vision... Tomorrow s Innovation JM VisTec System Pte Ltd Company Specialization: JM Vistec is a dynamic and growing Singapore-based hardware component solutions company that provides complete end-to-end
Machine Vision Basics
Machine Vision Basics bannerengineering.com Contents The Four-Step Process 2 Machine Vision Components 2 Imager 2 Exposure 3 Gain 3 Contrast 3 Lens 4 Lighting 5 Backlight 5 Ring Light 6 Directional Lighting
Fully Portable Spectrophotometer for Transmission Measurement
November 2008 LCRT-2005-S Portable Spectrophotometer for Transmission Measurement Spectral Transmission in d/0 and 0/0 Measurement Geometries Transparency Measurement in real in-line Set-up Photometric
Charged Coupled Device (CCD) S.Vidhya
Charged Coupled Device (CCD) S.Vidhya 02.04.2016 Sensor Physical phenomenon Sensor Measurement Output A sensor is a device that measures a physical quantity and converts it into a signal which can be read
You have a task. We have a solution. flo-ir berührungslos messen
flo-ir berührungslos messen Aawasserstrasse 10 CH 6370 Oberdorf, NW Tel.: +41 (0)41 871 39 88 Fax: +41 (0)41 871 39 87 info@flo-ir.ch www.flo-ir.ch You have a task We have a solution - 2 - What can be
The History and Future of Measurement Technology in Sumitomo Electric
ANALYSIS TECHNOLOGY The History and Future of Measurement Technology in Sumitomo Electric Noritsugu HAMADA This paper looks back on the history of the development of measurement technology that has contributed
Practical work no. 3: Confocal Live Cell Microscopy
Practical work no. 3: Confocal Live Cell Microscopy Course Instructor: Mikko Liljeström (MIU) 1 Background Confocal microscopy: The main idea behind confocality is that it suppresses the signal outside
>> ACCESSORIES 5 2 METALPLAST-SOPRANA
CABIN 7 >> ACCESSORIES METALPLAST-SOPRANA srl 10090 BRUINO TO VIA VOLVERA 88/4 TELEPHONE 011-9086490 FAX 011-9086979 E-MAIL : metsopr@tin.it WWW.metalplast-soprana.com 2 GRAB HANDLES GRAB HANDLE CODE 127013
SOLAR CELL INSPECTION WITH RAPTOR PHOTONICS OWL (SWIR) AND FALCON (EMCCD)
Technical Note Solar Cell Inspection SOLAR CELL INSPECTION WITH RAPTOR PHOTONICS OWL (SWIR) AND FALCON (EMCCD) August 2012, Northern Ireland Solar cell inspection relies on imaging the photoluminescence
Where Image Quality Begins
Where Image Quality Begins Filters are a Necessity Not an Accessory Inexpensive Insurance Policy for the System The most cost effective way to improve repeatability and stability in any machine vision
ISS-30-VA. Product tags: Integrating Sphere Source. https://www.gigahertz-optik.de/en-us/product/iss-30-va. Gigahertz-Optik GmbH 1/5
ISS-30-VA https://www.gigahertz-optik.de/en-us/product/iss-30-va Product tags: Integrating Sphere Source Gigahertz-Optik GmbH 1/5 Description standards for spectral radiance Spectroradiometers and other
Spectroradiometer CS-2000/2000A. The world's top-level capability spectroradiometers make further advances with addition of second model to lineup.
Spectroradiometer CS-000/000A The world's top-level capability spectroradiometers make further advances with addition of second model to lineup. 15 World's top level capability to detect extremely low
FEATURES GENERAL DESCRIPTION. CCD Element Linear Image Sensor CCD Element Linear Image Sensor
CCD 191 6000 Element Linear Image Sensor FEATURES 6000 x 1 photosite array 10µm x 10µm photosites on 10µm pitch Anti-blooming and integration control Enhanced spectral response (particularly in the blue
3x Magnification. Digital Zoom to 6x. CAUTION: Do not point Infrared Emitter directly into eye at close range.
MxGenPRO MANUAL-English.qx_MxGenPRO Manual-English 12/16/14 9:24 AM Page 3 Instruction Manual 3x Magnification. Digital Zoom to 6x. CAUTION: Do not point Infrared Emitter directly into eye at close range.
Advances in X-Ray Technology for Semicon Applications Keith Bryant and Thorsten Rother
Advances in X-Ray Technology for Semicon Applications Keith Bryant and Thorsten Rother X-Ray Champions, Telspec, Yxlon International Agenda The x-ray tube, the heart of the system Advances in digital detectors
SPECTRAL SCANNER. Recycling
SPECTRAL SCANNER The Spectral Scanner, produced on an original project of DV s.r.l., is an instrument to acquire with extreme simplicity the spectral distribution of the different wavelengths (spectral
Confocal chromatic sensors and confocal microscope Micrometer measurement of thickness, displacement, position
Confocal chromatic sensors and confocal microscope Micrometer measurement of thickness, displacement, position 2 optoncdt 2401 Confocal displacement measurement system - Non-contact measurement principle
The SS6000 Gold Mate Series For analyzing all precious metals and other elements from Mg to U
The SS6000 Gold Mate Series For analyzing all precious metals and other elements from Mg to U Portable desk top EDXRF analyzers Responsive, bright, color touch screen display Uses Silicon Drift or Silicon
10/3/2012. Study Harder
This presentation is a professional collaboration of development time prepared by: Rex Christensen Terri Jurkiewicz and Diane Kawamura Study Harder CR detection is inefficient, inferior to film screen
2D Scan Engine MDI-3100 MDI This document provides instructions for installing the MDI-3100 imager scan engine.
2D Scan Engine MDI-3100 MDI-3100 This document provides instructions for installing the MDI-3100 imager scan engine. Integration guide All information subject to change without notice. Document History
Ideal for display mura (nonuniformity) evaluation and inspection on smartphones and tablet PCs.
2D Color Analyzer Ideal for display mura (nonuniformity) evaluation and inspection on smartphones and tablet PCs. Accurately and easily measures the distribution of luminance and chromaticity. The included
Broad range of lighting solutions
Broad range of lighting solutions MORITEX and SCHOTT's has the most complete LED illumination portfolio available with the constant current controlled "MG-Wave Series" and constant voltage controlled "MCV-Light
Color Detection Fiber Sensor FZ-10 SERIES. Reliable and precise color discrimination. Red, green and blue LEDs. Easy set up
909 PHOTO PHOTO Color Sensor FZ SERIES Related Information General terms and conditions... F3 Glossary of terms... P.1549~ guide...p.65~ General precautions... P.155~ Recognition MEASURE panasonic.net/id/pidsx/global
10/26/2015. Study Harder
This presentation is a professional collaboration of development time prepared by: Rex Christensen Terri Jurkiewicz and Diane Kawamura Study Harder CR detection is inefficient, inferior to film screen
Image Formation and Capture
Figure credits: B. Curless, E. Hecht, W.J. Smith, B.K.P. Horn, A. Theuwissen, and J. Malik Image Formation and Capture COS 429: Computer Vision Image Formation and Capture Real world Optics Sensor Devices
FEATURES. 15 m ft. 4 m ft. 2 m ft. 100 mm in. 600 mm in. 15 m ft. 4 m ft. 2 m ft. 100 mm 3.
273 Cylindrical Photoelectric Sensor SERIES Related Information General terms and conditions... F-3 Glossary of terms... P.1549~ guide... P.231~ General precautions... P.1552~ PHOTO PHOTO MEASURE -LS200
>> ACCESSORIES 5 2 METALPLAST-SOPRANA
1 CABIN 7 >> ACCESSORIES METALPLAST-SOPRANA srl 10090 BRUINO TO VIA VOLVERA 88/4 TELEPHONE 011-9086490 FAX 011-9086979 E-MAIL : metsopr@tin.it WWW.metalplast-soprana.com 2 GRAB HANDLES GRAB HANDLE CODE
INSTALLATION INSTRUCTIONS
TEL1-866-XANATOS INSTALLATION INSTRUCTIONS PART#: BB080800\BB080800A 2 CITY BAR FOR JEEP PATRIOT 4X4 & 4X2 08-09 PARTS LIST: 1 City Bar 2 12-1.75mm x 50mm Hex Head Bolts 1 Center Tube Bracket 4 12-1.75mm
NEW MULTI MAG OPTICS INSIDE! 2012 APRIL edition SPECIAL EXHIBITION ISSUE
NEW MULTI MAG OPTICS INSIDE! 2012 APRIL edition SPECIAL EXHIBITION ISSUE PRODUCTS INDEX 03 BI-TELECENTRIC LENSES 15 LED ILLUMINATORS 16 MULTI MAG OPTICS 20 360 OPTICS 34 ENTOCENTRIC LENSES 36 3D OPTICS
Lumen, Lux & Candela
Index INDEX basics ON ILLUMINANCE Focusing technology LED technology EXPERT QUAlity Applications range overview Q1 Q3 Q5 (cree) Q5 (6-LED) H1 H3 LED type MAXIMum LIGHT OUTput measured in Lumens Battery
PENTALED. The first one, the original one!
PENTALED The first one, the original one! pag. 2 The art of innovating Right from its earliest days, RIMSA has always had a clear goal: to satisfy surgeons needs. RIMSA is fully aware that the key to meeting
Vision systems for the optical inspection of super thin glass
Born to see, destined for vision: 100% in-line inspection in glass production Vision systems for the optical inspection of super thin glass Super thin glass backs the trend towards increasingly flat and
Multispectral. imaging device. ADVANCED LIGHT ANALYSIS by. Most accurate homogeneity MeasureMent of spectral radiance. UMasterMS1 & UMasterMS2
Multispectral imaging device Most accurate homogeneity MeasureMent of spectral radiance UMasterMS1 & UMasterMS2 ADVANCED LIGHT ANALYSIS by UMaster Ms Multispectral Imaging Device UMaster MS Description
The Design and Construction of an Inexpensive CCD Camera for Astronomical Imaging
The Design and Construction of an Inexpensive CCD Camera for Astronomical Imaging Mr. Ben Teasdel III South Carolina State University Abstract The design, construction and testing results of an inexpensive
X-ray generation by femtosecond laser pulses and its application to soft X-ray imaging microscope
X-ray generation by femtosecond laser pulses and its application to soft X-ray imaging microscope Kenichi Ikeda 1, Hideyuki Kotaki 1 ' 2 and Kazuhisa Nakajima 1 ' 2 ' 3 1 Graduate University for Advanced
2CH610-BOB 2CH67-BOB 2CH65-BOB ø 60 cm
CICERONE ST.132-1ENG SPECIFICATION Range: Cicerone Design: Lorenzo Stano SMALL TABLES WITH POWDER COATED FRAME AND HPL TOP Ø 60 cm Code: 2CH610-BOB height 103,5 cm, base Ø 50 cm, top Ø 60 cm 2CH67-BOB
Telecentric lenses.
Telecentric lenses 2014 Bi-Telecentric lenses Titolo Index Descrizione Telecentric lenses Opto Engineering Telecentric lenses represent our core business: these products benefit from a decade-long effort
Image Formation. Dr. Gerhard Roth. COMP 4102A Winter 2015 Version 3
Image Formation Dr. Gerhard Roth COMP 4102A Winter 2015 Version 3 1 Image Formation Two type of images Intensity image encodes light intensities (passive sensor) Range (depth) image encodes shape and distance
LFV3-100SW LFV3-40SW. Transmittance rate (High) LED side. Move to LED side. LED side. Default position LFV3-CP-13RD. Wavelength/ color.
LFV series Refer to our website for product details. CCS LFV Use a search engine. Search You can also use your smartphone or cell phone. Provides diffused light evenly from LFV-RD LFV-SW LFV-BL -TP 2 H
Acceptance test for the linear motion actuator for the scanning slit of the HIE ISOLDE short diagnostic boxes
EUROPEAN ORGANIZATION FOR NUCLEAR RESEARCH CERN ACC NOTE 2014 0099 HIE ISOLDE PROJECT Note 0036 Acceptance test for the linear motion actuator for the scanning slit of the HIE ISOLDE short diagnostic boxes
Flat Dome Lights LFX3 Series
LFX3 series Flat Dome Lights LFX3 Series Triple the Brightness of Conventional Lights * Comparison with the conventional 100X100 model. Expanded Product Lineup: 28 Models in Total pplications Reading characters
Transilluminators: UV light, White light (WE-LED), Blue Light (BE-LED) Made in Germany Made by Herolab NEW
Transilluminators: UV light, White light (WE-LED), Blue Light (BE-LED) Made in Germany Made by Herolab Standard Class For use in all fields NEW Advanced Class Multiwave / Variable Intensity High Contrast
Optical basics for machine vision systems. Lars Fermum Chief instructor STEMMER IMAGING GmbH
Optical basics for machine vision systems Lars Fermum Chief instructor STEMMER IMAGING GmbH www.stemmer-imaging.de AN INTERNATIONAL CONCEPT STEMMER IMAGING customers in UK Germany France Switzerland Sweden
High-Accuracy Luminance & Chromaticity Measurement Comparable to Many Spectroradiometers
New Auto Mode increases accuracy at low luminance levels CHROMA METER CS-200 Suitable for measurement of optical devices such as LCDs, PDPs, organic ELs, FEDs and LEDs. 1.0 0.5 380 400 500 600 700 (nm)
Machine Vision Illumination Techniques
Machine Vision Techniques Firstsight Vision Ltd,The Old Barn, Grange Court,Tongham, Surrey, GU10 1DW 1.0 Introduction In machine vision applications the importance of the illumination is almost always
Procedures for Performing Cryoelectron Microscopy on the FEI Sphera Microscope
Procedures for Performing Cryoelectron Microscopy on the FEI Sphera Microscope The procedures given below were written specifically for the FEI Tecnai G 2 Sphera microscope. Modifications will need to
Development of Defect Inspection System for PDP ITO Patterned Glass
18 / JULY 2006 INTERNATIONAL JOURNAL OF PRECISION ENGINEERING AND MANUFACTURING Vol. 7, No.3 Development of Defect Inspection System for PDP ITO Patterned Glass Jun-Yeob Song 1,#, Hwa-Young Park 1, Hyun-Jong
FAR EAST TOOLS CATALOG 5700Z BERGEON MODEL
No: JK01 GLASS & CASE PRESS (LIGHTER) No: JK03 WOOD HOLDER PRESS MACHINE No:JK02 SCREW CASE BACK CLOSING PRESS LIKE 5700Z BERGEON MODEL No: JK04 POCKET SIZE BACK CASE OPENER Page:1 No: JK05 CASE FIXING
Low Light, WDR, Day & Night Vandal-Proof Color Dome Camera. SVD-4120A Built-in SSNR chip Originally Developed by Samsung Techwin
Low Light, WDR, Day & Night Vandal-Proof Color Dome Camera SVD-4120A www.samsungcctv.com Built-in chip Originally Developed by Samsung Techwin Crisp and clear images in any light Samsung Techwin's new
UNIVERSITY OF WATERLOO Physics 360/460 Experiment #2 ATOMIC FORCE MICROSCOPY
UNIVERSITY OF WATERLOO Physics 360/460 Experiment #2 ATOMIC FORCE MICROSCOPY References: http://virlab.virginia.edu/vl/home.htm (University of Virginia virtual lab. Click on the AFM link) An atomic force
STEINDORFF NYMC C. Comparison Microscope. Operating Instructions. A. Features and Functions
1 NYMC0035000C Comparison Microscope Operating Instructions A. Features and Functions Through optical enlargement, this comparison microscope, can help the user to observe clearly, by looking into the
Motorized Axio Observer Start-up instructions
Start-up instructions 1. If using fluorescence turn on Fluorescent light source. TL light Source (Hal 100) 2. Turn on microscope using switch on lower left side of the microscope. 3. If imaging, turn on
RM75 MINITURE MINI RING L IGHT IP 50 PRODUCT HIGHTLIGHTS 5 PIN M12. RoHS YEAR. smartvisionlights.com. Compliant CE. Compliant IEC. Rated.
RM75 MINITURE MINI RING L IGHT P R O D U C T D A T A S H E E T Cable Length: 6 4 T-slots for Mounting Optional Camera Adapter High Intensity LEDs 5Pin M12 Connector Warranty 10 YEAR Compliant IEC 62471
QUANTUM CALCU-FLASH OPERATING INSTRUCTIONS
QUANTUM CALCU-FLASH OPERATING INSTRUCTIONS 1. INTRODUCTION This manual is your guide to operating Calcu-Flash. Please read it completely to understand fully the unique capabilities of your instrument.
This paper describes the construction and use
Color Mixer for Every Student Gorazd Planins ic, University of Ljubljana and The House of Experiments, Ljubljana, Slovenia This paper describes the construction and use of a color light mixer that uses
Door Hinges Drill-in Hinges
Drill-in hinge StarTec Frame part For timber lining frames For rebated doors Maintenance-free friction bearing To use in combination with receiver Max. door weight: 40 kg Knuckle: Ø15 mm Drilling bit Ø7.2
Contrast Sensors. SICK The pioneer in contrast sensors for more than 60 years
P r o d u c t i n f o r m at i o n Contrast Sensors SICK The pioneer in contrast sensors for more than 60 years Top products Contrast sensors They put registration marks into a proper light SICK contrast
Basic principles of photography. David Capel 346B IST
Basic principles of photography David Capel 346B IST Latin Camera Obscura = Dark Room Light passing through a small hole produces an inverted image on the opposite wall Safely observing the solar eclipse
WFC3 TV2 Testing: UVIS Filtered Throughput
WFC3 TV2 Testing: UVIS Filtered Throughput Thomas M. Brown Oct 25, 2007 ABSTRACT During the most recent WFC3 thermal vacuum (TV) testing campaign, several tests were executed to measure the UVIS channel
High Power LED Spot Illumination and Coaxial Illuminatuion
100 RoHS CE High Power Spot Illumination and Four product series ranging in level of intensity from the MCEP-070 Series to MCEL Series are available for customers diverse needs. The wide variety of choices
QUANTUM CALCU-FLASH-S OPERATING INSTRUCTIONS
QUANTUM CALCU-FLASH-S OPERATING INSTRUCTIONS 1. INTRODUCTION These instructions are your guide to operating Calcu-Flash S. Please read it completely to understand the unique capabilities of your instrument.
EastRising LCD Panel Quality Criteria
EastRising Technology Co.,Ltd. EastRising LCD Panel Quality Criteria ISO9001 Registered Company sira CERTIFICATION 011 REV Descriptions Release Date 1.0 Preliminay Release Nov-24-2009 2.0 Add more Precaution
X-ray Inspection Systems 2D AXI / 3D AXI / WAXI
X-ray Inspection Systems 2D AXI / 3D AXI / WAXI SMT / Semiconductor Analysis Equipment High-performance X-ray Inspection System X-eye SF160 Series Non-destructive analysis of semiconductor, SMT, and electron/electric
CX-400 SERIES Ver.2. Compact Photoelectric Sensor. Sensors that are environmentally and user friendly.
291 Compact Photoelectric Sensor Related Information SERIES Ver.2 General terms and conditions... F-17 Sensor selection guide... P.283~ MS-AJ / CHX-SC2...P.919 / P.920 Glossary of terms / General precautions...
Ideal for display mura (nonuniformity) evaluation and inspection on smartphones and tablet PCs.
2D Color Analyzer 8 Ideal for display mura (nonuniformity) evaluation and inspection on smartphones and tablet PCs. Accurately and easily measures the distribution of luminance and chromaticity. Advanced
JUMO Wtrans probe RTD temperature probe with wireless transmission of the measured values
JUMO Wtrans probe RTD temperature probe with wireless transmission of the measured values k For measured temperatures from -30... +260 C or -200... +600 C k For mobile or stationary temperature measurement
NanEye GS NanEye GS Stereo. Camera System
NanEye GS NanEye GS Stereo Revision History: Version Date Modifications Author 1.0.1 29/05/13 Document creation Duarte Goncalves 1.0.2 05/12/14 Updated Document Fátima Gouveia 1.0.3 12/12/14 Added NanEye
Ultrasonic sensors. Reliable on almost all surfaces. UT 20 from Page 548. UT 12 from Page 564. UT/UM 18 from Page 568
Ultrasonic sensors Reliable on almost all surfaces UT 0 from Page 58 UT from Page 56 UT/UM 8 from Page 568 UT 0-S miniature ultrasonic sensors with soundpipe Reliable detection through the smallest of
FPS. FPS Flexible Position Sensor. Function description. Your advantages and benefits
FPS www.comoso.com Accessories Sensor System FPS Flexible Position Sensor FPS Flexible Position Sensor The optional FPS sensor system measures the position of gripper jaws. It then indicates in which of
Wafer Loaders for IC Inspection Microscopes NWL200 Series. Wafer Loaders for IC Inspection Microscopes
Wafer Loaders for IC Inspection Microscopes NWL200 Wafer Loaders for IC Inspection Microscopes Wafer Loaders for IC Inspection Microscopes I Nikon s original technology ensures safe, reliable loading of
NOVO-GLOSS IQ GONIOPHOTOMETER. Instrument Manual
NOVO-GLOSS IQ GONIOPHOTOMETER Instrument Manual RHOPOINT INSTRUMENTS LTD Novo-Gloss IQ Operation Manual Rhopoint Instruments Ltd Beeching Road Bexhill-on-Sea East Sussex, UK, TN39 3LG Phone +44 (0) 1424
Digitizing the Harvard College Observatory Plate Collection
Digitizing the Harvard College Observatory Plate Collection An Instrument for the Historic Sky Jonathan E. Grindlay Robert Treat Paine Professor of Practical Astronomy at Harvard College Alison Doane Curator
Howie's Laser Collimator Instructions:
Howie's Laser Collimator Instructions: WARNING: AVOID DIRECT OR MIRROR REFLECTED EYE EXPOSURE TO LASER BEAM The laser collimator is a tool that enables precise adjustment of the alignment of telescope
Photography PreTest Boyer Valley Mallory
Photography PreTest Boyer Valley Mallory Matching- Elements of Design 1) three-dimensional shapes, expressing length, width, and depth. Balls, cylinders, boxes and triangles are forms. 2) a mark with greater
COLOUR INSPECTION, INFRARED AND UV
COLOUR INSPECTION, INFRARED AND UV TIPS, SPECIAL FEATURES, REQUIREMENTS LARS FERMUM, CHIEF INSTRUCTOR, STEMMER IMAGING THE PROPERTIES OF LIGHT Light is characterized by specifying the wavelength, amplitude
ROBOT VISION. Dr.M.Madhavi, MED, MVSREC
ROBOT VISION Dr.M.Madhavi, MED, MVSREC Robotic vision may be defined as the process of acquiring and extracting information from images of 3-D world. Robotic vision is primarily targeted at manipulation
Microsystem Technology for Eddy Current Testing Johannes PAUL, Roland HOLZFÖRSTER
11th European Conference on Non-Destructive Testing (ECNDT 2014), October 6-10, 2014, Prague, Czech Republic More Info at Open Access Database www.ndt.net/?id=16638 Microsystem Technology for Eddy Current