vision sensors LIGHTING SPECIFICATIONS AND DRAWINGS
|
|
|
- Randolph Moore
- 6 years ago
- Views:
Transcription
1 4020 Linz/ustria Pummererstr. 36 Tel.: +43-(0) * vision sensors LIGHTING SPECIFICTIONS ND DRWINGS Copyright 2005, Cognex Corporation. ll information in this document is subject to change without notice. ll rights reserved.
2 In-Sight lighting specifications cognex light modules (optional for all in-sight vision sensors) Light Type Operation ttributes of Light Type pplication Category* Drawing Category No.** L1 L2 L3 Ring Lights Provides soft, even illumination from all directions. Emphasizes surface features on non-reflective parts. De-emphasizes contrast between part and background. Measuring small molded plastic parts. Measuring parts that cannot be illuminated with back lighting. L4 L5 L3 L47 L43 L6 L7 C L8 L9 L10 L11 Low ngle Ring Lights Provides soft, low angle illumination from all directions. Emphasizes edges along with scratches on glossy surfaces of parts. Used in above applications, where working distance is limited. L42 L44 L53 L45 L46 C L39 L12 Diffuse Lights Provides high-intensity, on-axis illumination. Emphasizes flat regions of part surface. De-emphasizes deviations in part surface. Verifying presence of liners inside bottle-caps. Measuring interior features with varying depths. L13 L14 L15 L48 L49 L52 L51 L16 * Denotes compatible power supply and cable category ** Designates outline drawings on pages 26 to 36 1
3 cognex light modules (optional for all in-sight vision sensors) Cognex Lighting Module Part Numbers & Description Non-Strobed pplications Power Requirements Strobed pplications In-Sight 1000, 4000, In-Sight 2000, In-Sight 1000, 4000, In-Sight 2000, Series 3000 Series 5000 Series Series CLM mm outer diameter ring CL or CL-CS CL CL CL CLM-LDR232RD-00 32mm outer diameter ring CLM-LDR250RD-00 50mm outer diameter ring CL-PD and CL-Cx-00, CL-PD and CL-STU and CLM-LDR270RD-00 70mm outer diameter ring or CL-P and CL-Cx-00 CL-Cx-00, or CL-PTU and CL-Cx-00 CLM-LDR270IR mm outer diameter ring (IR) CLM-LDR290RD-00 90mm outer diameter ring CLM-LDR250L-00 50mm outer diameter ring (lue) CLM-LFR100SW mm outer diameter ring CL-PD and CL-STU and CLFCx-00, CLM-LDR274LL-00 74mm outer diameter ring (lue) CL-PD and CLFCx-00 or CL-PTU and CLFCX-00 CLK-LDR270SW-00 70mm outer diameter ring (White) CLK-LDR290SW-00 90mm outer diameter ring (White) CLK Fluorescent Ring Light 120VC, 50/60Hz14W CLK Fluorescent Ring Light 220VC, 50/60Hz14W CLM-LDR274RDL-00 CLM-LDR2132RDL-00 74mm outer diameter ring 132mm outer diameter ring CL-PD and CL-Cx-00, or CL-P and CL-Cx-00 CLM-LDR2170RDL mm outer diameter ring CLM-FPQ75L-00 75mm x 75mm square light (lue) CL-PD and CLFCx-00 CLM-LDQ100SW-00 4-bar array (White) 108mm x 108mm CLM-LDQ bar array 108mm x 108mm CLM-LDQ bar array 148mm sq. CL-PD and CL-Cx-00, CLM-FPR mm outer diameter ring or CL-P and CL-Cx-00 CLM-FPQ mm square CLK mm outer diameter ring 220VC, 50/60Hz14W CL-PD and CL-STU and CL-Cx-00, or CL-PTU and CL-Cx-00 CL-PD and CL-STU and CLFCx-00, or CL-PTU and CLFCX-00 CL-PD and CL-STU and CL-Cx-00, or CL-PTU and CL-Cx-00 CLM mm illumination window CL or CL-CS CL CL CL CLM-LFVCP mm illumination window CLM-LFV mm illumination window CLM-LFV mm illumination window CL-PD and CL-Cx-00, CL-PD and CL-STU and CLM-LFR mm outer diameter flat or CL-P and CL-Cx-00 CL-Cx-00, or CL-PTU and CL-Cx-00 CLM-LKR mm shallow dome CLM-LFV mm x 120mm CLM-LFV34L-00 46mm square (lue) CL-PD and CL-STU and CLFCx-00, CL-PD and CLFCx-00 CLK-LFV50SW-00 50mm illumination window (White) or CL-PTU and CLFCX-00 1 Includes bracket 2 on page 39 2
4 cognex light modules (optional for all in-sight vision sensors) Light Type Operation ttributes of Light Type pplication Category* Drawing Category No.** L17 L18 ack Lights Provides maximum contrast between part outline and background. Emphasizes outline of part and part features. De-emphasizes interior features. Measuring external part edges. Verifying hole patterns in stamped metal parts. L19 L20 L21 L54 L40 L50 L22 Dome Lights Provides extremely even, diffuse illumination. Evenly illuminates mirrored surfaces. De-emphasizes 3-dimensional part surface characteristics. Detecting printing on wrinkled foil. Measuring connector pins. L23 L24 Linear rray Lights Provides even, concentrated illumination along a straight line. Emphasizes part surface irregularities and raised features. Measuring long, thin parts, and parts where edges need to be highlighted. L25 L26 L27 L28 L30 L29 L31 Dark Field Lights Provides extremely low-angle illumination for imaging of part surface irregularities. Emphasizes surface irregularities and raised features on parts. Inspecting metal parts with dents, bumps, or other raised features. L32 L33 L34 L35 L36 Spot Lights Provides diffuse beam of light for achieving maximum contrast in a certain direction. Emphasizes a specific feature on a part. Verifying the presence of individual components in an assembly. Inspecting parts with features that are angled in a certain direction. L37 L38 L41 * Denotes compatible power supply and cable category ** Designates outline drawings on pages 26 to 36 3
5 cognex light modules (optional for all in-sight vision sensors) Cognex Lighting Module Part Numbers & Description Non-Strobed pplications Power Requirements Strobed pplications In-Sight 1000, 4000, In-Sight 2000, In-Sight 1000, 4000, In-Sight 2000, Series 3000 Series 5000 Series Series CLM mm x 100mm back light CL or CL-CS CL CL CL CLM-LDLTP27x mm x 27mm back light CL-PD and CL-Cx-00, CL-PD and CL-STU and CLM-LDLTP51x mm x 51mm back light or CL-P and CL-Cx-00 CL-Cx-00, or CL-PTU and CL-Cx-00 CLM-LDLTP mm x 100mm back light CLM-LDLTP mm x 200mm back light CL-PD or CL-Cx-00 CL-PD , CL-Cx-00 and CL-STU CLM-LDLTP250X mm x 190mm CLK-LFL100IR95-00 CLM-LFL CLK-LFL100SW x80 IR back light 100mm x 80mm edge-lit 100mm x 80mm edge-lit (White) CL-PD and CL-Cx-00, or CL-P and CL-Cx-00 CL-PD and CLFCx-00 CL-PD and CL-STU and CL-Cx-00, or CL-PTU and CL-Cx-00 CL-PD and CL-STU and CLFCx-00, or CL-PTU and CLFCX-00 CLM Covers areas up to 80mm CL or CL-CS CL CL CL CLM-LDM90-00 Covers areas up to 90mm CL-PD and CL-Cx-00, or CL-P and CL-Cx-00 CL-PD and CL-STU and CL-Cx-00, or CL-PTU and CL-Cx-00 CLM mm x 20mm line illumination CL or CL-CS CL CL CL CLM-LDL42X mm x 15mm line illumination CLM-LDL74X27N-00 74mm x 27mm line illumination CL-PD and CL-Cx-00, CL-PD and CL-STU and CLM-LDL130X mm x 15mm line illumination or CL-P and CL-Cx-00 CL-Cx-00, or CL-PTU and CL-Cx-00 CLM-LDL247X mm x 16mm line illumination CLK-LDL42x15SW-00 42mm x 15mm line illumination (White) CL-PD and CL-STU and CLFCx-00, CL-PD and CLFCx-00 CLK-LDL130x15SW mm x 15mm line illumination (White) or CL-PTU and CLFCX-00 CLM mm inner ring diameter CL or CL-CS CL CL CL CLM-LDR75L mm inner ring diameter CLM-LDR96L mm inner ring diameter CL-PD and CL-Cx-00, CL-PD and CL-STU and CLM-LDR146L mm inner ring diameter or CL-P and CL-Cx-00 CL-Cx-00, or CL-PTU and CL-Cx-00 CLM-LDR206L mm inner ring diameter CLM CLM L-00 Covers up to 50mm at a distance of 100mm Covers up to 50mm at a distance of 100mm (Infrared spot light) CL or CL-CS CL CL CL CLM-LSP41RD-00 Covers up to 50mm at a distance of 100mm CL-PD and CL-Cx-00, or CL-P and CL-Cx-00 CL-PD and CL-STU and CL-Cx-00, or CL-PTU and CL-Cx-00 1 Includes bracket 3 on page 39 2 Includes bracket 4 on page 39 4
6 Light Module Power sources and adapters Power Supplies Category* Drawing No.** Model Power Requirements Voltage/Power Output P1 CL C90~264VC 24V/30w P2 CL-PD C90~264VC 12V/28w P2 CL-PD C90~264VC 24V/28w P3 CL-PD C90~264VC 24V/50w power supply and Strobe dapter combination Category* Drawing No.** Model Trigger Input P5 CL TTL level positive & negative edge trigger P6 CL TTL level positive & negative edge trigger P10 CL-PTU Photocoupler input (5m) Strobe dapters Category* Drawing No.** Model Trigger Input P4 CL Supplied by an In-Sight 2000 or 3000 camera via 13' 2" cable P7 CL-STU Photocoupler input (4m) Power dapters Category* Drawing No.** P8 Model CL-CS Trigger Input None (Doesn't support strobing) P9 CL-P None (Doesn't support strobing) Light Module Cables and dapters Cable & Cble dapters Category* Model Description CL Patch cable connecting any category light to an In-Sight 2000 or Extension cable that adds additional length to any category light Extension cable that adds additional length to any category light Dual Spot Light adapter cable, provides power to 2 spot lights CL-C2-00 CL-C5-00 CL-CW-00 Extension cable that adds additional length to any 12V category light Extension cable that adds additional length to any 12V category light Dual light adapter. Enables two category 12V lights to be connected to a single power supply. Total power of the 2 lights must not exceed power supplies limit. 5 * Denotes compatible light module category **Designates outline drawings on pages 37 and 38
7 Light Module Power sources and adapters Digital Light Control External Light Control No. of Lights Supported none none 2 Lights (supports any 2 category lights) 256 levels External light control bit, light pulse, int/ext switching 2 Lights (combined power draw of the 2 lights must not exceed power output of unit). Output Power Requirements Pulse Width Provides power & strobe output for a single category light 1.25 max. w/ overload protection.01 to 64 msec Provides power & strobe output for 2 category lights 1.25 max. w/ overload protection.01 to 64 msec 12V, 80m Max per circuit, 2 circuits, 28 Watts Max VC to 99 msec Output Provides power & strobe output for a single category light (can strobe 2 spot lights) Power Requirements Supplied by an In-Sight 2000 or 3000 via 6' 4" cable Pulse Width.01 to 1.9 msec High-speed CMOS output; drive on/off control input of power unit Supplied by digital power supplies.01 to msec Output Power Requirements 14.4W 24VDC input 12V and 24V outputs; L1:24W, L2:24W (Sum of L1 and L2 must be less than 30W) 24VDC input, 50W max Length No. of Lights Supported 3 feet 1 10 feet 1 30 feet 1 30 feet 2 (spot lights) 6.5 feet 1 15 feet 1 14 inches 2 * Denotes compatible light module category **Designates outline drawings on pages 37 and 38 6
8 L1 CLM L2 CLM-LDR232RD-00 L3 CLM-LDR250RD-00 / CLM-LDR250L-00 L4 CLM-LDR270RD-00 / CLM-LDR270SW-00 CLM-LDR270IR95-00 L5 CLM-LDR290RD-00 L6 CLK-LDR270SW-00 L7 CLK-LDR290SW-00 7
9 lighting L8 CLK / CLK L9 CLM-LDR274RDL (3.84) Outside Diameter ccess Cover to Change Lamp 54.1 (2.13) 50.8 (2.00)/58.72 (2.312) Inside Diameter (6.77)) (1.01) L10 CLM-LDR2132RDL-00 L11 CLM-LDR2170RDL-00 L12 CLM L13 CLM-LFVCP
10 L14 CLM-LFV50-00 L15 CLM-LFV70-00 L16 CLK-LFV50SW-00 L17 CLM L18 CLM-LDLTP27X27-00 L19 CLM-LDLTP51X
11 L20 CLM-LDLTP L21 CLM-LDLTP L22 CLK-LFL100SW-00 L23 CLM L24 CLM-LDM90-00 L25 CLM
12 L26 CLM-LDL42X15-00 L27 CLM-LDL74X27N-00 L28 CLM-LDL130X15-00 L29 CLK-LDL42X15SW-00 L30 CLM-LDL247X
13 L31 CLK-LDL130X15SW-00 L32 CLM L33 CLM-LDR75L1-00 L34 CLM-LDR96L1-00 L35 CLM-LDR146L1-00 L36 CLM-LDR206L
14 L37 CLM L38 CLM L-00 L39 CLK L40 CLK-LFL-100IR
15 L41 CLM-LSP41RD-00 L42 CLM-FPQ75L-00 L43 CLM-LDR274LL-00 14
16 L44 CLM-LDQ100SW-00 / CLM-LDQ L45 CLM-FPR L46 CLM-FPQ
17 L47 CLM-LFR100SW-00 L48 CLM-LFR130K-00 L49 CLM-LKR70-00 L50 CLM-LFL
18 L51 CLM-LFV34L-00 L52 CLM-LFV70-00 L53 CLM-LDQ L54 CLM-LDLTP250X
19 Cognex power Modules (optional for all in-sight vision sensors) P numbers refer to chart on page P1 CL P2 CL-PD / CL-PD P3 CL-PD P4 CL
20 Cognex power Modules (optional for all in-sight vision sensors) P numbers refer to chart on page P5 CL P6 CL P7 CL-STU P8 CL-CS P9 CL-P P10 CL-PTU M4 screw hole for bracket 2-M3 screw hole (ottom of chassis) 90 M4 screw hole for bracket (Center of rear panel) (Screw insertion less than 3mm) 60 M4 (Center of rear panel) OUTPUT L1 L2 DJUST L1 L2 P-2430 DC24V IN
21 Cognex Light Module rackets numbers refer to chart on page 21 and Ring Light racket (Included with CLM ) 2 diffuse light racket (Included with CLM ) 3 Dome Light racket (Included with CLM ) 4 dark field light racket (Included with CLM ) 20
Utilizing original CCS light. Model with a specially Folded Conic) system. guidance technology.
CCS a company that is meeting needs. Realize Like the changing times, there is no limit to the challenges CCS undertakes. D i r e c t Direct Direct illumination from highdensity arrays. Flatring Lights
LFV3-100SW LFV3-40SW. Transmittance rate (High) LED side. Move to LED side. LED side. Default position LFV3-CP-13RD. Wavelength/ color.
LFV series Refer to our website for product details. CCS LFV Use a search engine. Search You can also use your smartphone or cell phone. Provides diffused light evenly from LFV-RD LFV-SW LFV-BL -TP 2 H
LED Lighting for Machine Vision
LED Lighting for Machine Vision Catalog 2011 LAT elektronik AB Member of the Polytec Organization www.latab.net LED lighting for machine vision About LATAB LAT elektronik AB (LED Array Technology) was
LATAB Industrial LED Lighting
LED Lighting for Machine Vision Catalog 2011 LAT elektronik AB Member of the Polytec Organization www.latab.net LED lighting for machine vision About LAT elektronik AB (LED Array Technology) was founded
High Power Lights HPR2 / HPD2 Series "Bright", "Uniform", "Easy to Use" High Power Ring Lights & High Power Dome Lights CCS Inc.
High Power Lights HP2 / HPD2 "right", "Uniform", "Easy to Use" High Power ing Lights & High Power Dome Lights WWW.STEMME-IMAIN.COM CCS Inc. "right", "Uniform", "Easy to Use" Improved support by increasing
Coaxial Lights LFV3 series
Refer to our website for product details. CCS Use a search engine. Search You can also use your smartphone or cell phone. Provides diffused light evenly from the same axis as the camera -SW -SW -CP-18SW
Bar Lights. LDL2 series. Direct Lighting. Bar Lights. Bar Lights that use surface-mounted LEDs. Rich lineup with 15 types and 61 models
series Refer to our website for product details. CCS Use a search engine. Search You can also use your smartphone or cell phone. -33X8RD -41X16SW -X16GR -119X16RD -L LDR-L1 2 H 2 2 --FN H2 -FN Lenses Spot,
LED Lighting for Machine Vision. LED Lighting for Machine Vision Product Catalog
LED Lighting for Machine Vision LED Lighting for Machine Vision Product Catalog 2 Member of the Polytec Organization www.polytec.com Contents LED lighting for machine vision 4 Why choose LATAB products?
E3Z-LS. Distance-settable Photoelectric Sensor. Ordering Information. Sensors. Accessories (Order Separately)
Distance-settable Photoelectric Sensor Switching between background and foreground suppression (BGS/FGS) enables detecting a variety of objects under various background/foreground conditions. Influence
Vision Lighting Seminar
Creators of Evenlite Vision Lighting Seminar Daryl Martin Midwest Sales & Support Manager Advanced illumination 734-213 213-13121312 dmartin@advill.com www.advill.com 2005 1 Objectives Lighting Source
High Power Lights. HPR2 / HPD2 Series. "Bright", "Uniform", "Easy to Use" High Power Ring Lights & High Power Dome Lights. CCS Inc.
High Power Lights HP2 / HPD2 "right", "Uniform", "Easy to Use" High Power ing Lights & High Power Dome Lights WWW.STEMME-IMAIN.COM CCS Inc. "right", "Uniform", "Easy to Use" Improved support by increasing
Vision Sensors Inspector. The intelligent vision solution in an easy-to-use sensor package.
P R O D U C T I N F O R M AT I O N Vision Sensors Inspector The intelligent vision solution in an easy-to-use sensor package. Product overview Inspector I10 Inspector I20 Inspector I40 Inspector P30 Tough
67TD Series - Miniature Time Delay Relays DPDT, 4PDT, 5 Amp
TD Series - Miniature Time Delay Relays DPDT, PDT, mp E When small size is a requirement series relays fit where others won t. The miniature ice cube timers are capable of handling up to amps. Typical
PRODUCT DATA SHEET. Quality control in food, chemicals, and textile industry Intensity Control
The MetaBright TM is another product in the Metaphase family of LED lights for line scan. Its narrow, structured beam delivers high intensity and concentrated light for a narrow field of view. The high
Eight Tips for Optimal Machine Vision Lighting
Eight Tips for Optimal Machine Vision Lighting Tips for Choosing the Right Lighting for Machine Vision Applications Eight Tips for Optimal Lighting This white paper provides tips for choosing the optimal
Infrared LED Lights Product Lineup
Infrared Lights Infrared LED Lights Product Lineup Abundant lineup, total of 56 models Available for various applications CCS Inc. Infrared Lights What is Infrared Light? Infrared light is light that has
LED illumination for image processing and microscopy
illumination for image processing and microscopy Versatility, durability and good value are the key features of our lighting units. Exchangeable attachments, such as lenses and diffusers, optimise luminous
Flat Dome Lights LFX3 Series
LFX3 series Flat Dome Lights LFX3 Series Triple the Brightness of Conventional Lights * Comparison with the conventional 100X100 model. Expanded Product Lineup: 28 Models in Total pplications Reading characters
TH2 series. Flat Lights. TH2 Series. Comprehensive product lineup to satisfy all your needs. CCS Inc.
TH2 series Flat Lights Comprehensive product lineup to satisfy all your needs. CCS Inc. Table of Contents Application Examples P. TH2 series TH2 series type P. 5 TH2-PM series type P. 9 TH2 series type
INSPECTION SENSORS SVS2 SERIES VISION SENSORS HIGHLIGHTS APPLICATIONS
INSPECTION VISION SENSORS SVS2 SERIES The SVS2 vision sensor series presents all the characteristics able to solve artifi cial machine vision applications in a fl exible and intuitive way. SVS2 is a completely
Distance-setting Photoelectric Sensor
Distance-setting Photoelectric Sensor The Combination of the Hyper LED and Shine-proof Achieves both Ease-of-use and High Performance Hyper LED mounted. Finest pin-point beam in the industry allows detection
Built-in Amplifier Photoelectric Sensor
Built-in Amplifier Photoelectric Sensor Easy-to-use, Low-cost Photoelectric Sensor Incorporating s that can be clearly seen from a distance Conforms to EN and IEC standards Incorporating polarizing function,
PRODUCT DATA SHEET. Quality control in food, chemicals, and textile industry Compatible with DDC-3 and ILD L Dimmers
Using Metaphase s proprietary optics, the works like a traditional line light but can project its light at a lower divergence angle. This helps keep a tight, structured beam of light at longer working
3 versions MEDIUM FLAT MFDOME FLAT DOME, POWERFUL LIGHT. powerful flat dome, ultra-thin borders, rising time: 25 μs
MEDIUM FLAT MFDOME FLAT DOME, POWERFUL LIGHT Machine vision applications Led lighting system very diffuse lighting ultra-thin borders fit camera s objectives Powerful flat dome homogeneous & easy to incorporate
1010/T Series Incandescent Illuminator
1010/T Series Incandescent Illuminator Installation and Operating Instructions This manual describes the installation and operating procedures for the American Dynamics 1010/T Series Illuminator. Before
Ultramini clever reliability in confined quarters. Simple installation and operation
Series OU Ultramini clever reliability in confined quarters m Through-beam sensors OUS/OUE up to, m Retro-reflective sensors OUR up to, m Retro-reflective sensors with polarizing filters OUP and OUC up
Distance-setting Photoelectric Sensor
Distance-setting Photoelectric Sensor The Combination of the Hyper LED and Shine-proof Achieves both Ease-of-use andhighperformance Hyper LED mounted. Finest pin-point beam in the industry allows detection
SWIR Line Light PRODUCT DATA SHEET. Broadband IR. Available Wavelengths. WAVELENGTH (nanometers) SPECIFICATIONS
Line Light Wavelengths from 1050nm to 1650nm are now offered in the Metaphase Line Light Collimated Line Light. Short-wave infrared technology provides the necessary contrast to illuminate test objects
DATAVS2 series.
VISION SENSORS DATAVS2 series The DATAVS2 vision sensor series presents all the characteristics able to solve artificial machine vision applications in a flexible and intuitive way. DATAVS2 is a completely
Infrared LED Lights Product Lineup
Infrared Lights Infrared LED Lights Product Lineup Abundant lineup, total of 56 models Available for various applications CCS Inc. Infrared Lights What is Infrared Light? Infrared light is light that has
Inspector Vision Sensors. The intelligent vision solution in an easy-to-use sensor package
PRODUCT INFORMATION Inspector Vision Sensors The intelligent vision solution in an easy-to-use sensor package PDF processed with CutePDF evaluation edition www.cutepdf.com Inspector I-series Applications
UX-CLL (UG-CLL, UC-CLL)
Using Metaphase s proprietary optics, the UX-Collimated works like a traditional line light but can project its light at a lower divergence angle. This helps keep a tight, structured beam of light at longer
Using the Large Linear Verification Kit
Quick Start Guide Using the Large Linear Verification Kit Purpose This document provides guidance to users of the Large Linear Verification Kit, part number SLN-0000006. The kit consists of a light, bracket,
Mini-G series. Embedded Amplifier Photo Sensors. Type. Model Side-on type Head-on type GT1SN GT1N GT3N GT3RSN. Through-beam type GT7SN
series Embedded mplifier Photo Sensors Ultra small size ideal for embedded use IP 7 water resistance for wet environments Stability output is provided High-speed response of.5 ms High-powered light penetrating
LED Neon Light Round
LED Neon Light Round Part #: NEON -P RND HB 24VDC WHT lc con cab LED Neon Light Round SPECIFICATION 36 21.5 19.5 HORIZONTAL BEND 46.5 CST Length CST Custom Length 3 cuttable every 3.25 Operating Voltage
onlinecomponents.com
Analog Photoelectric Sensor Analog Output Proportional to Light Received, Ideal For Inspection and Measurement Analog object detection ideal for position, size, color and surface characteristics Both analog
Z4D-F. LED-type Micro Displacement Sensor with Many Features in a Compact Body. Micro Displacement Sensor. Ordering Information.
/ Length Micro Sensor LED-type Micro Sensor with Many Features in a Compact Body Compact body only /4th the volume of our previous product. % cost reduction over our previous product. High performance
PRODUCT DATA SHEET FEATURES
These special illuminators provide intense, evenly diffused illumination. The Diffused Dome Light is ideal for inspection of reflective, specular, rough or topographic surfaces. Optical grade reflector
Make Machine Vision Lighting Work for You
Make Machine Vision Lighting Work for You Lighting is our passion Flexibility is our model Daryl Martin Technical Sales and Product Specialist Advanced illumination 734-213-1312 dmartin@advill.com Who
MetaBright Washdown Ring Light MB-RL205
The Metaphase offers high intensity, shadow-less illumination with five times the lifetime over fluorescents. Ring lights are essential for lighting specular or diffused surfaces. The MetaBright TM is
CD42-STS Operating Manual Diver/ROV Pipeline Pig Location & Tracking System
CD42-STS Operating Manual Diver/ROV Pipeline Pig Location & Tracking System March 8, 2011 1801 North Juniper Avenue Broken Arrow, Oklahoma 74012 USA 1 (800) 580-4234 USA & Canada Toll free 1 (918) 258-6068
Section F TEL-E-SCORE
Section F TEL-E-SCORE December 2009 1F Index No. Part No. Description 1. N.A. Support Bracket 2. N.A. Filler 3. N.A. Base Assembly 4. N.A. Wiring Diagram Decal 5. N.A. Lower Unit Cover 6. N.A. Flat Socket
SP2 CONTINUOUS LIGHT KIT
SP2 CONTINUOUS LIGHT KIT Model: 2816 SP2 Light Kit ASSEMBLY AND USER MANUAL SP2 CONTINUOUS LIGHT KIT Congratulations on purchasing the best solution for photo studio lighting on a budget. This kit is perfect
Project: Client: Part #: NEON -P FLT HB 24VDC WHT lc con cab. Date: Qty:
LED Neon Light Flat Part #: NEON -P FLT HB 24VDC WHT lc con cab LED Neon Light Flat SPECIFICATION 27.5 19.5 HORIZONTAL BEND 46.5 CST Standard Snap Connector shown. Dimensions in millimeters See connections
Standard type. Basic type. 1 Stability indicator (green) 2 Operation indicator (orange) 4 Operation mode switch. 5 Power indicator (green)
INSTRUCTIS Compact Photoelectric Sensor CX-00 Series MEUEN-CX00 V. Thank you for purchasing products from Panasonic. Please read this Instruction Manual carefully and thoroughly for the correct and optimum
Ribcage Installation. Part 2 - Assembly. Back-Bone V1.06
Ribcage Installation Part 2 - Assembly Back-Bone V1.06 Contents Section 1 Before You Get Started... 2 Included With Your Kit:... 2 Figure: A... 3 CAUTION!... 4 Note:... 4 Tools Required... 5 Section 2:
flexible lighting technology
As a provider of lighting solutions for the Machine Vision Industry, we are passionate about exceeding our customers expectations. As such, our ISO 9001 quality procedures are at the core of everything
COGNEX. Checker 3G Series. User s Guide
COGNEX Checker G Series User s Guide COGNEX What is Checker G and what does it do? Table of Contents Checker G is a programmable vision sensor that verifies the presence and appearance of objects. You
Ultrasonic Displacement Sensor E4DA
Sensing Supply voltage Output Ultrasonic beam Ultrasonic Displacement Sensor Sensor s Narrow Ultrasonic Beam Accurately Detects Small Objects, Provides Linear Analog Output For Inspection, Measurement
2D Scan Engine MDI-3100 MDI This document provides instructions for installing the MDI-3100 imager scan engine.
2D Scan Engine MDI-3100 MDI-3100 This document provides instructions for installing the MDI-3100 imager scan engine. Integration guide All information subject to change without notice. Document History
ORIGINAL INSTRUCTIONS
FACTORY AUTOMATION ORIGINAL INSTRUCTIONS Safety light grid SLP series The latest version of the General Terms of Supply for Products and Services in the Electronics Industry issued by the German Electrical
APPLICATIONS FOR TELECENTRIC LIGHTING
APPLICATIONS FOR TELECENTRIC LIGHTING Telecentric lenses used in combination with telecentric lighting provide the most accurate results for measurement of object shapes and geometries. They make attributes
PRODUCT DATA SHEET. Machine Vision and Automation Intensity Control
(Exolight) builds upon the world renowned, ground breaking technology of the original Exolight Series (ISO). The has a high-impact durable molded diffuser that results in an appearance similar to a fluorescent
- Flash. A very thin gage, sometimes film-like material, which extends from the parting line projection, shall be removed.
SEALING ELEMENTS 15. Tolerances and Surface Imperfections Size tolerances and surface imperfections on O-rings are influenced by the tolerance, finish, and cleanliness of the mold cavities from which they
Label Sensor. Ordering Information. Application Example E3S-CD68/CD63. Ideal for Detecting Labels on Bottles. E3S-CD68/CD63 Label Sensor
Ideal for Detecting Labels on Bottles Satisfies the requirements of IP67. Ensures a vibration resistance of 10 Hz to 2 khz and a shock resistance of 1,000 m/s 2 (approximately 100G). Incorporates an NPN
Elara NanoEdge Fixed Frame Screen User Guide
Elara NanoEdge Fixed Frame Screen User Guide INTRODUCTION INTRODUCTION WARNING This product may contain sharp edges, please handle with care. Protective gloves are recommended. A minimum of two people
FEATURES. 15 m ft. 4 m ft. 2 m ft. 100 mm in. 600 mm in. 15 m ft. 4 m ft. 2 m ft. 100 mm 3.
273 Cylindrical Photoelectric Sensor SERIES Related Information General terms and conditions... F-3 Glossary of terms... P.1549~ guide... P.231~ General precautions... P.1552~ PHOTO PHOTO MEASURE -LS200
LM45 MULTI-DRIVE TM. Miniature Mini LINEAR L IGHT IP 65 PRODUCT HIGHLIGHTS. RoHS YEAR. smartvisionlights.com. Compliant CE. Warranty.
LM45 MULTI-DRIVE TM Miniature Mini LINEAR L IGHT P R O D U C T D A T A S H E E T High Intensity LEDs Cable Length: 15.2 cm (6 ) 5-Pin M12 Connector (Male) Aluminum Housing T-slot for Mounting Warranty
ivu Series TG Image Sensor
Quick Start Guide Introduction The ivu Series Image Sensor is used to monitor labels, parts, and packaging for type, size, orientation, shape, and location. The sensor has an integrated color touch screen
LXE Mounting Holes on Base. Warranty. Compliant IEC. Brightest linear light yet, delivering up to 100,000 lux in OverDrive mode
LXE300 Direct Connect LINEAR L IGHT MULTI-DRIVE TM P R O D U C T D A T A S H E E T High Intensity LEDs Metal Housing Tslots for Connecting Lights (Female) 4 Mounting Holes on Base (Male) Warranty 10 YEAR
Machine Vision Lyte-MV 2
Machine Vision Lyte-MV 2 The Lyte-MV 2 Range The Lyte-MV 2 provides a reliable industrial light source for a wide range of machine vision applications including triangulation, 3D inspection and alignment.
LumiBright TM LE 2400B-270
solutions in light LumiBright TM LE 2400B-270 2400B-270 Compact Light Engines provide extreme brightness and a highly uniform light distribution. Chip-on-Board LED technology with metallic PCB substrates
Built-in Amplifier Photoelectric Sensor
Built-in Amplifier Photoelectric Sensor Easy-to-use, Low-cost Photoelectric Sensor Incorporating s that can be clearly seen from a distance Conforms to EN and IEC standards Incorporating polarizing function,
LXE300. Four Mounting Holes on Base. Compliant IEC. Warranty
LXE300 Direct Connect LINEAR LIGHT MULTI-DRIVE TM P R O D U C T D A T A S H E E T High Intensity LEDs Aluminum Housing T-slots for Connecting Lights (Female) Four Mounting Holes on Base (Male) Warranty
2 Registration Mark Photoelectric Sensors
SMARTEYE COLORMARK II 2 Registration Mark Photoelectric Sensors Contrast Sensor for Registration Marks www.ttco.com 800-237-0946 2-155 Registration Mark Photoelectric Sensors 2 SMARTEYE COLORMARK II Registration
OPERATORS MANUAL CP 52
OPERATORS MANUAL CP 52 COMMERCIAL PROCESSOR QUICK START If you were the type that cheated on school book reports by just skimming through the reading assignments, then this section is for you! It gives
RM75. Miniature Mini IP 50 RING LIGHT LOW-ANGLE MULTI-DRIVE TM PRODUCT HIGHLIGHTS 5-PIN M12. RoHS YEAR. smartvisionlights.com. Compliant CE.
RM75 Miniature Mini RING LIGHT LOW-ANGLE MULTI-DRIVE TM P R O D U C T D A T A S H E E T Cable Length: 15.2 cm (6 ) Four T-slots for Mounting Aluminum Housing Optional Camera Adapter High Intensity LEDs
FLATSUN - Rafael Lozano-Hemmer. Installation Manual
FLATSUN - Rafael Lozano-Hemmer Installation Manual READ FIRST - Before taking the art work out of the crate, you should prepare the work space and make sure you have enough room. You will need at least
Machine Vision Basics
Machine Vision Basics bannerengineering.com Contents The Four-Step Process 2 Machine Vision Components 2 Imager 2 Exposure 3 Gain 3 Contrast 3 Lens 4 Lighting 5 Backlight 5 Ring Light 6 Directional Lighting
How-to guide. Working with a pre-assembled THz system
How-to guide 15/06/2016 1 Table of contents 0. Preparation / Basics...3 1. Input beam adjustment...4 2. Working with free space antennas...5 3. Working with fiber-coupled antennas...6 4. Contact details...8
INSTRUCTIONS. Surface Wall Mounting, See page 3. Ceiling Recessed Mounting, See page 6
runo RM (RU-RM) INSTRUCTIONS IMPORTNT SFEGURDS When using electrical equipment, basic safety precautions should always be followed including the following:. RED ND FOLLOW LL SFETY INSTRUCTIONS. Disconnect
Project: Client: Part #: NEON -P ARC 24VDC WHT lc con cab. Date: Qty: Length CST Custom Length cuttable every 2.81 Operating Voltage (ov)
LED Neon Light Arch LED Neon Light Arch Length CST Custom Length cuttable every 2.81 Operating Voltage (ov) 24V DC Finish (fin) WHT White 2700K Incandescent White 3000K Warm White 3500K Sand White Light
Zhaga Books. October 2016
Zhaga Books October 2016 Zhaga Books: Introduction Zhaga creates a series of specifications, known as Books Each Book defines a family of LED lighting components, such as LED light engines, LED modules,
w w w. h d o n l i n e s h o p. d e VRSCF RIGID SADDLEBAGS GENERAL PREPARATION -J04704 REV Kit Number Models Tools and Supplies Required
-J070 REV. 00-0- VRSCF RIGID SADDLEBAGS GENERAL Kit Number 7-0 Models For model fitment information, see the P&A retail catalog or the Parts and Accessories section of www.harley-davidson.com (English
Seven Million lx. PF Series. High Power Strobe LED Light Units/Control Unit. Extreme Power Strobe Lights. PF series. CCS Inc.
PF series High Power Strobe LED Light Units/Control Unit Extreme Power Strobe Lights Seven Million lx Peak illuminance of LDL-PF-5X3SW (LWD=3 mm) Applications Appearance inspection of electronic components
General-Purpose Photoelectric Sensor
General-Purpose Photoelectric Sensor Wide Selection of High Performance Small DC Sensors Offers Longer Sensing Distances Fast 0. msec response time for high-speed sensing Extended sensing distances up
Thru-beam Sensors. Model SM800 Series. Ideal for small object detection
Model SM800 Series MICROSONIC Thru-beam Sensors Ideal for small object detection Extremely reliable thru-beam sensing in a smaller package and ranges up to 1016 mm (40") They are miniature in size, powerful
SIGMA TEK, INC. 1U /-003 COMM / NAV / DME / ATC RADIO CONTROL PANEL INSTALLATION MANUAL. Publication No. 86M072
SIGMA TEK, INC. 1U619-002/-003 COMM / NAV / DME / ATC CONTROL PANEL INSTALLATION MANUAL Publication No. 86M072 TABLE OF CONTENTS Section Title Page No. 1.0 General Information...1 1.1 Introduction...1
ORIENTAL MOTOR GENERAL CATALOG
ORIENTL MOTOR GENERL CTLOG STEPPING MOTORS 5-PHSE STEPPING MOTOR ND MICROSTEP DRIVER PCKGE RFK Features B-64 Specifications B-67 Speed vs.torque Characteristics B-68 Dimensions B-69 List of Motor and Combinations
Sole Fitness E95 Elliptical Trainer TurnKey Delivery and Setup Training
Sole Fitness E95 Elliptical Trainer TurnKey Delivery and Setup Training Delivery Requirements Ground delivery Inside delivery to customer-specified location Unpack and assemble machine, and remove packing
F400. Detects subtle color differences. Color-graying vision sensor. Features
Color-graying vision sensor Detects subtle color differences Features In addition to regular color extraction, the color-graying sensor features the world's first color-graying filter. This is a completely
INSTALLATION INSTRUCTIONS 3 BULL BAR 99-04, 04 "HERITAGE" F-150/250LD 2WD, 97-04, 04 "HERITAGE" 4WD WD EXPEDITION/ WD EXPEDITION PART
INSTALLATION INSTRUCTIONS 3 BULL BAR PART #B-F1971;B-F2971 PARTS LIST: 1 Bull Bar 2 12-1.75mm x 130mm x 40mm Hex Bolts 1 Driver/Left Mounting Bracket 4 12-1.75mm x 35mm Hex Bolts 1 Passenger/Right Mounting
W 23-2: Focussing on what is essential and economic
Product group W - BGB Photoelectric proximity switch Energ. Photoelectric proximity switch W -: Focussing on what is essential and economic Photoelectric reflex switch The indicator LEDs on the W - offer
ET-413 2MP USB PEN MICROSCOPE
ET-413 2MP USB PEN MICROSCOPE USER S MANUAL INTRODUCTION FUNCTIONS AND APPLICATIONS The ET-413 2 Mega-Pixel USB PEN MICROSCOPE is a new electronic product for micro observations. It is a tubular imaging
OPERATION AND MAINTENANCE MANUAL TRIAXIAL ACCELEROMETER MODEL PA-23 STOCK NO
OPERATION AND MAINTENANCE MANUAL TRIAXIAL ACCELEROMETER MODEL PA-23 STOCK NO. 990-60700-9801 GEOTECH INSTRUMENTS, LLC 10755 SANDEN DRIVE DALLAS, TEXAS 75238-1336 TEL: (214) 221-0000 FAX: (214) 343-4400
Operating Instructions
UVX-300 Luminescence sensor Operating Instructions CAUTIONS AND WARNINGS CAUTION: The discrete output must not be connected to outputs from other sensors (i.e. outputs from multiple sensors must not be
zforce AIR Touch Sensor Specifications
zforce AIR Touch Sensor 2017-12-21 Legal Notice Neonode may make changes to specifications and product descriptions at any time, without notice. Do not finalize a design with this information. Neonode
Contents. Volume 8 Sensing Solutions CA E February
Photoelectric Sensors.9 Product Description The E67 Long Range Perfect Prox Series from Eaton s electrical sector, the highest performing long-range sensor you can buy with background rejection, is ideal
Series 291 Optical Encoder
Electrocomponents Series 9 Optical Encoder Data Sheet Precision, Long-life Compact mm Size Optical Encoder Features Package Size ( X X 7 mm) Million life cycles (No detent) Million life cycles (With detent)
BRACKETS AND ACCESSORIES GUIDE. Can Adapter / Trim Ring for D4LP, D4 and D5. Can Adapter / Trim Ring for D6
D SERIES CEILING LOUDSPEAKERS BRACKETS AND ACCESSORIES GUIDE Accessory Part No D45-CATR D6-CATR D45-NCB D6-NCB D8-NCB D10-NCB Description Can Adapter / Trim Ring for D4LP, D4 and D5 Can Adapter / Trim
Installation and Assembly: In-wall Mount for 32" to 71" Flat Panel Screens
Installation and Assembly: In-wall Mount for 32" to 71" Flat Panel Screens Model# IM760P, IM760P-S IM760PU, IM760PU-S Screen size range 32" to 71" (81 to 180 cm) 32" to 60" (81 to 152 cm) IM760P IM760P-S
Sealing Elements. Technical Handbook O-rings. 15. Tolerances and Surface Imperfections
15. Tolerances and Surface Imperfections Size tolerances and surface imperfections on O-rings are influenced by the tolerance, finish, and cleanliness of the mold cavities from which they are produced.
Background Suppression with Photoelectric Sensors Challenges and Solutions
Background Suppression with Photoelectric Sensors Challenges and Solutions Gary Frigyes, Product Manager Ed Myers, Product Manager Jeff Allison, Product Manager Pepperl+Fuchs Twinsburg, OH www.am.pepperl-fuchs.com
Select digital Control Units matching your network
Digital Refer to our website for product details. CCS Use a search engine. Search You can also use your smartphone or cell phone. Select digital matching your network Digital Compliant The supplied AC
Height Adjustable Benching End Panel and Utility Pole
Height Adjustable Benching End Panel and Utility Pole Tools required: END PANEL Jig Saw Power Drill END PANEL WITH UTILITY POLE Bit Holder Long #2 Square Drive Bit 5mm Hex Drive Bit UTILITY POLE Level
Outline for Tutorials: Strobes and Underwater Photography
Outline for Tutorials: Strobes and Underwater Photography I - Strobes Conquering the Water Column Water column - depth plus distance from camera to subject; presents challenges with color, contrast, and
DATAVS2 series.
VISION SENSORS DATAVS2 series The DATAVS2 vision sensor series presents all the characteristics able to solve artificial machine vision applications in a flexible and intuitive way. DATAVS2 is a completely
Connections Appearance Sensing method Sensing distance Operating mode Model Plug-in connector Horizontal Through-beam 30 m Light-ON
Heavy-duty Plug-in Photoelectric Sensor Water-resistive Photoelectric Sensor with Metal Housing & Plug-in Connector Ensuring Long Sensing Distance Satisfies the requirements of IP67, and NEMA6P. Ensures
Linear Motion and Assembly Technologies Aluminum Framing /07. Die-Cast Foundation Brackets 3-10 & 3-11
-0 Linear Motion and ssembly Technologies luminum Framing 91 500 1 /07 Section : Profile onnectors Overview One of the greatest strengths of the osch Rexroth structural aluminum framing system is the wide
Bottom Back Light OPT-FL series
Combined Bar Light Model -LIM -LIM -LIM -LIM V/.W V/.W V/.W V/.W V/.W V/.W V/.W V/.W Bottom Back Light -FL series Applied in the large area illumination, to enhance the high contrast silhouettes for high