3 versions MEDIUM FLAT MFDOME FLAT DOME, POWERFUL LIGHT. powerful flat dome, ultra-thin borders, rising time: 25 μs

Transcription

1 MEDIUM FLAT MFDOME FLAT DOME, POWERFUL LIGHT Machine vision applications Led lighting system very diffuse lighting ultra-thin borders fit camera s objectives Powerful flat dome homogeneous & easy to incorporate The connector can be placed on of the 8 sides of the angles Fixing on the length (groove) (4 nuts supplied) Fixing on the corners (screws M3x0 not supplied) Camea fixing (back of the product) ULTRA-THIN borders ON THE 4 SIDES powerful flat dome, ultra-thin borders, rising time: 5 μs 3 versions Besides the Standard version, there are other versions: Power customisable by the user, overdrive up to x 3 Light managed by a remote controller overdrive up to x 6 Both powerful and very diffuse, the Medium Flat can deal with many machine vision applications. The Medium Flat has been designed to detect small pieces in a container, to highlight thermoformed products or also to improve contrasts on workpieces made of several materials. The version can offer a lighting power far higher and the EXPERT version (with no current control inside) even more. It works in continuous and strobe mode, with very short rising and falling times: 5 μs and 5 μs., which can then be set up on any kind of conveyor belts. At the basis of the connector, LED show if the product is powered and if the strobe mode is on. The Medium Flat is available in various wavelengths, and also in various dimensions. For specific sizes, that don t belong to the standard range, you can call TPL Vision for customized products. Equipped with very thin borders, the new Medium Flat uniformly illuminates from the whole useful surface, included from the edges. No hot spot to notice! Very thin, the Medium Flat gets a hole in the middle to insert the camera s lens. The connector can be placed on any side of the Medium Flat

2 3 versions available The STANDARD version is very easy to use: you don t have to adjust anything, only to plug the light. The STANDARD version works in continuous and strobe mode, with rising and falling times especially short: 5 μs and 5 μs. The STANDARD version generates a high powerful light, that fits most machine vision applications. Moreover, some LED, close to the connector, show if the light is powered, and if the strobe mode is on, for a better use of the product. Besides the Standard Version, other versions are available : and EXPERT. overdrive up to x3 with Current control inside The version is just as easy to set and to use as the STANDARD version. Equipped with specific electronics, it gives the opportunity for users to overdrive on their own the lighting power. The version is dedicated to specialists who want to customize the luminous flux very precisely, so as to get the most reliable results. overdrive up to x6 with your own controller In the EXPERT version, the products do not have any current controller, which is very useful for users who want to work with their own controllers. In strobe mode, they can use the EXPERT lights in overdrive, so as to get a more intense lighting power. The EXPERT version definitely targets machine vision specialists, able to manage a whole vision system. HOW TO CHOOSE A MEDIUM FLAT? Medium With or without current controller inside WITHOUT WITH Expert Supplied without current control power supply (for remote controller, like for example Gardasoft). Overdrive up to x6. Economical Économique ou Haute Puissance Powerful Standard Overdrive (up to x3)

3 Technical specifications EXPERT Electronics Power supply 4 VDC +/-0% Functioning mode Strobe input Continuous or strobe PNP : From 5 to 4V for 00% ON. From 0 to V for 00% OFF. NPN : less than V for 00% ON. Above V for 00% OFF. Max 0V. External current controller (not supplied) Overdrive No 6 KLux (Standard :3 Klux) According to power supply Strobe Conditions (On time, duty cycle) No restriction 0% at max power 5% at max power Dimming Potentiometer 30-00% N/A Maximum rising time 5 µs According to power supply Maximum falling time 5 µs According to power supply N/A Wiring Surface 0,5m² : or Surface > 0,5m² : and Surface 0,5m² : or 0,5m² < Surface < 0,88m² : and Surface 0,5m² : 0,5m² < Surface < 0,5m² : cables 4x,5² Power supply cable(s) max length Wire M : 0m (not suppied) ; : 0m 0m 0m Max consumption Colour Thickness (mm) Surface,3W par 5cm² in peak and on average Mini 00x00mm Max surface 0,88m² Max length,9m Max perimeter 4,5m 3W/5cm² in peak max 0,43W/5cm² max on average (3ms@0%) Optics White, Red, Green, Blue, Infrared Mechanics 45mm Mini 00x00mm Max surface 0,88m² Max length,9m - Max perimeter 4,5m Internal diameter (mm) 65 Weight 3. Kg/m² +/-5% Body materials Diffuser Fixing Aluminum and loaded ABS White PMMA 4 M4 nuts (supplied) to insert in the groove or 4 M3x0 screws (not supplied) Environment 7,8W/5cm² in peak max 0,54W/5cm² max on average (300µs@5%) Mini 00x00mm Max surface 0,5m² Max length,9m - Max perimeter 4,5m Operating temperature -0 to +40 C / 80% of humidity without condensation / No thermal shock (max temperature variation: 0 C in 4h) Storage temperature -0 to +60 C / 80% of humidity without condensation / No thermal shock (max temperature variation: 0 C in 4h) IP protection IP 40 Labels RoHS-CE-DEEE lighting power Related products 3 KLux 6 KLux Lighting power measured on the diffusing plate White LED colour. M female T-POWER 4 pins cable Safety glasses Direct meters Ref: C-M-4P-T-M 5 meters Ref: C-M-4P-T-5M Ref: EYE-PROTECT 0 meters Ref: C-M-4P-T-0M

4 AVAILABLE Dimensions EXPERT MY contact

5 How to build your reference WIRING WIRING O E STANDARD EXPERT WHI The first figure shall always be the biggest one. M CONNECTOR M* A CABLE.5 m B CABLE 5 m CABLE 0 m C *T-Power M connector for STANDARD and versions only 3 4 A B C CABLE.5 m CABLE 5 m CABLE 0 m The position of wiring must be different from the position of wiring WIRING CHOICE POSITION CHOICE STANDARD EXPERT WIRING WIRINGS SURFACE 0.5M² wiring SURFACE 0.5M² wiring SURFACE 0.5M² wiring 7 8 M T-Power OR.50m 5m 0m M T-Power OR.50m 5m 0m.50m 5m 0m 4 3 Diffuser side overview Diffuser side overview SURFACE > 0.5M² wirings 0.5M² < S. < 0.88M² wirings 0.5M² < S. < 0.5M² wirings REFERENCE EXAMPLES: M T-Power M T-Power.50m 5m 0m STANDARD 30x0 cm White LED M T-Power position n 4: MFDOME-300-WHI-M4.50m 5m 0m.50m 5m 0m.50m 5m 0m 80x50 cm Red LED M T-Power position n.50 meters position n 5: MFDOME-O MA5 EXPERT 60x60 cm Blue LED 0 meters position n 5 meters position n 8: MFDOME-E CB8 TPL Vision is extremely careful about BIN sorting in the selection of LEDs for their products. The human eye is particularly sensitive to color variations. Two products of the same color may appear different in the eyes of the user. However, the maximum variation of the wavelength does not exceed 0 nm. Here are the following bandpass camera filters we recommend: n White LEDs: no filter required n Infrared LEDs: LP 830 ( n Red LEDs: BP 635 ( n Cyan LEDs: BP 505 ( We advise using bandpass filters from MidOpt: TPL VISION UK Brenchley House - School Road - Charing - Kent TN7 0JW - UK Tel. +44 (0) contact@tpl-vision.co.uk Features and presentations liable to modifications without prior notice. E- version, 09/0 Edition Other available documents : pdf, dwg, dxf, igs, step & X_Y drawings User s guide