Output configuration. Dark-ON. Light-ON. Dark-ON. Light-ON. Dark-ON. Light-ON

Transcription

1 ASH & ALAIN INDIA PVT LTD S-00, F.I.E.E., Okhla Industrial Area, Phase-ii, New Delhi-000(India) Tel : Fax : sales@ashalain.com Photomicrosensor with Cable (Non-modulated) Slim, Compact Photomicrosensor that is still easy to use. Compact, thin profile enables dense mounting. Indicator is visible from both sides. Wide operating voltage range: 5 to VDC -W Be sure to read Safety Precautions on page 9. Ordering Pre-wired s Appearance Standard L-shaped T-shaped method type distance 5 mm (slot width) Cable length Infrared light NPN output * PNP output * *. numbers ending in suffix A (e.g., 770A) indicate models for which the operation indicator will turn ON when the light is interrupted. *. numbers ending in suffix R (e.g., 770R) indicate models for which the operation indicator will turn ON when the light is interrupted A A 77 77A 87 87A 77 77A 87 87A 770P 770R 870P 870R 77P 77R 87P 87R 77P 77R 87P 87R

2 e-con Junction Connector s * Appearance Standard L-shaped method type distance 5 mm (slot width) Cable length Infrared light NPN output 770-ECON 770A-ECON 770-ECON 770A-ECON 870-ECON 870A-ECON 870-ECON 870A-ECON 77-ECON 77A-ECON 77-ECON 77A-ECON 87-ECON 87A-ECON 87-ECON 87A-ECON T-shaped 77-ECON 77A-ECON 77-ECON 77A-ECON 87-ECON 87A-ECON 87-ECON 87A-ECON * e-con is a new industrial standard being promoted by manufacturers of FA devices and connectors. The E9-ECON@M (cable length: or 5 m) with an e-con connector on one end, and the E9-ECONW@M (cable length: 0.5 m to in units of 0. m) with e-con connectors on both ends are available. symbol is used to indicate the cable length (e.g., E9-ECONM). -W 9

3 Ratings and Specifications Type Standard L-shaped T-shaped NPN models 770/ A/870A 770P/870P 770R/870R 5 mm (slot width) Opaque: 0.8 mm min mm * The response frequency was measured by detecting the following rotating disk. 77/87 77A/87A 77P/87P 77R/87R PNP Item models distance object Differential distance Light source GaAs infrared LED with a peak wavelength of 90 nm Indicator (turns ON when light is interrupted for models with A or R suffix) Supply voltage 5 to VDC ±0%, ripple (p-p): 0% max. Current consumption 5 ma max. (NPN models), 0 ma max. (PNP models) NPN open collector: 5 to VDC, 00 ma max. 00 ma load current with a residual voltage of 0.8 V max. Control output 0 ma load current with a residual voltage of 0. V max. PNP open collector: 5 to VDC, 50 ma max. 50 ma load current with a residual voltage of. V max. Response frequency * khz min. ( khz average) Ambient illumination,000 lx max. with fluorescent light on the surface of the receiver Ambient temperature Operating: 5 to +55 C Storage: 0 to +80 C (with no icing) Ambient humidity Operating: 5% to 85% Storage: 5% to 95% (with no condensation) Vibration resistance Destruction: 0 to,000 Hz (peak acceleration: 00 m/s ).5-mm double amplitude for h (-min periods) each in X, Y, and Z directions Shock resistance Destruction: 500 m/s for times each in X, Y, and Z directions Enclosure rating IEC IP60 Connecting method Pre-wired (standard cable length: ) Weight (packaged) Approx. 0 g Material Case: Polybutylene phthalate (PBT) Disk 77/87 77A/87A 77P/87P 77R/87R. mm mm mm t = 0.m -W 9

4 Engineering Data (Typical) Position Characteristics Position Characteristics Repeated Position 770 Characteristics Tr ON Tr ON Tr d d = ±0.00m d d Tr Distance d (mm) Tr Distance d (mm) Tr 0/V Vcc = V No. of repetitions: 0, Ta = 5 C Distance d (mm) I/O Circuits NPN Timing charts A 77A 77A 870A 87A 87A transistor ON transistor ON ON transistor ON transistor ON (control output) 00 ma max. Connector pin arrangement for e-con junction connector (control output) 00 ma max. 5 to VDC Note: Pin is not used. Connector pin arrangement for e-con junction connector 5 to VDC Note: Pin is not used. -W 9

5 PNP Timing chart 770P 77P 77P 870P 87P 87P 770R 77R 77R 870R 87R 87R Applicable Connectors transistor ON transistor ON transistor ON transistor ON 5 to VDC 5 to VDC -W 5.8 E9-ECON@M Safety Precautions Refer to Warranty and Limitations of Liability on page F-. Do not use this product in sensing devices designed to provide human safety. E9-ECONW@M *. The E9-ECON@M (cable length: or 5 m) with an e-con connector on one end, and the E9-ECONW@M with e-con connectors on both ends (cable length: 0.5 m to in units of 0. m) are available. *. symbol is used to indicate the cable length (e.g., E9-ECONM). WARNING Shield color Pin No. Use Brown () Power supply (+V) White () --- Blue () Power supply (0 V) Black () Note: Pin is not used. Precautions for Correct Use Make sure that this product is used within the rated ambient environment conditions. 9

6 Dimensions (Unit: mm) Standard 770/770P 870/870P 770A/770R 870A/870R CAD data L-shaped 77/77P 87/87P 77A/77R 87A/87R CAD data T-shaped 77/77P 87/87P 77A/77R 87A/87R CAD data 0... axis.9 9 Two 6 dia.., axis Two,. dia. holes Indicator window 5 dia. of. dia., cores, (0.08 mm with 0.7-mm dia. insulator); Standard length: , Four, 0.8 R.6 axis Six, R Indicator window e-con Junction Connector e-con Junction Connector e-con @@@-ECON 5.6 of. dia., cores: 0./ V V 5.6 of. dia., cores: 0./ 5 dia. axis..6 of. dia., cores, (0.08 mm with 0.7-mm dia. insulator); Standard length: V V axis 9., axis.. Indicator window 5 dia. 5.6 of. dia., cores: 0./ 9. Four, R.6 Two, R of. dia., cores, (0.08 mm with 0.7-mm dia. insulator); Standard length: Terminal Specifications Terminal Specifications Terminal Specifications + V V Cat. No. E8-E-0 In the interest of product improvement, specifications are subject to change without notice. -W ASH & ALAIN INDIA PVT LTD S-00, F.I.E.E., Okhla Industrial Area, Phase-ii, New Delhi-000(India) Tel : Fax : sales@ashalain.com 95