E : Emitter, N : NPN Open collector output, P : PNP Open collector output. Specification DC 12V ~ 24V (Ripple max 10%) 1.5M -20 ~ ~ +80

Transcription

1 Description is photoelectric sensors with self-contained ultra miniature amplifier. Features Long distance scanning Fingertip-size Applications FA Sensor Optical switch Built in amplifier Classification OMS - TV E : Emitter, N : NPN Open collector output, P : PNP Open collector output Absolute Maximum Ratings Parameter Supply voltage Sensing distance Operating temperature range Storage temperature range Specification DC 12V ~ 24V (Ripple max 10%) 1.5M -20 ~ ~ +80 Ta=25 Electro-Optical Characteristics Parameter Sensing method Through-beam type Specification Current consumption Max : 40mA (Emitter : Max 20mA, Receiver : Max 20mA) Directional angle 2 ~ ±15 Response time Operation or reset 1ms Max Standard sensing object Diameter 4 mm size opaque Output mode Dark-On output Control output Indicator Operation indicator (Red) Light source(λ) Infrared LED (850 nm) NPN/PNP open collector Current Load : Max 80mA, Residual voltage : Max 1V Ta=25 3/8

2 Environmental Characteristics Parameter Dielectric strength 1 minute at AC 500V 50/60 Hz Vibration resistance Specification 10 ~ 50Hz (1 min cycle), 1.5mm double amplitude, 2 hours each in X,Y,and Z direction Shock resistance 500m/S 2 3 times each in X,Y, and Z directions Insulation resistance Min 20 MΩ at DC500V Ambient illumination Incandescent light :3,000 lx Max, Sunlight : 10,000 lx Max Protection IP40 (IEC Standard) Material Case : PBT Lens : PC Connection method Emitter : 2P, Receiver : 3P 2.4Φ, length : 2 m Weight About 20g (with cable) Ta=25 Block diagram Emitter BROWN (+) Main Circuit 12 ~ 24V BLUE (-) Reciever - NPN Output BROWN (+) Main Circuit 80mA max Load BLACK(OUTPUT) 12 ~ 24V BLUE (-) 4/8

3 Reciever - PNP Output BROWN (+) Main Circuit 80mA max BLACK(OUTPUT) Load 12 ~ 24V BLUE (-) Directions 1) Make the emitter and receiver face each other, then power on. 2) After fixing one of two, moving the other one to left, right, up and down. Checking the range then install them in the mid point of the range. 3) When the adjustment is completed, performing operation-test with standard-sensing-object. 4) We recommend to use our products within 80% of Max. range. Cautions 1) Cleaning Lenz or case with a dry-duster. Do not use Gasoline, Sinner, or organic solvent. 2) Avoid the place where there is extreme vibration, shock, moisture. 3) Caution! Checking the polarity before supplying voltage. 4) Do not carry more than specified load and supply higher voltage than specified. 5) Detecting distance is depending on size, color, material of the standard-sensing-object. 6) Do not expend connection line longer than 10m. 7) Using filter to prohibit the intervention of ambient light which is coming to range of directional angle. 8) Change the position of installation between emitter and receiver, when installing several products too close. It might affect each other. 5/8

4 Characteristics graph Angle deviation Horizontal migration θ Y Y X Detect Angle Characteristics Horizontal Distance Characteristics 5 Distance(m) 4 3 Distance Y(cm) Distance X(m) AngleΘ( ) 6/8

5 Dimensinal outline (Unit : mm) 7/8

6 Packing Specification 1) Inner packing (1) Packing with antistatic bag. (2) Bag is packed in 1.5 Box, cushion added to prevent damage. 2) Outer packing (1) Outer packing material is carton. Size of box would be referred to box specification below. (2) When outgoing quantity is small, inner packing is possibly shipped. 3) Label (1) Packing label is attached on a carton box. (2) The label imformation includes Product Name, Lot No., Packing Quantity and Manufacturer. 4) Box Specification Box Dimension(W x L x H cm ) Standard x 20 x x 36 x x x 53 x 28 2 x x 53 x 53 2 x 4 Antistatic bag packed with 1 each. Antistatic bag packed 20pcs (Box 1.5) Label (Box 1.5) x 7 = 140pcs (Box 2) 8/8