Identified as modifier. /F1 focal length by default. Select another focal length or diffuse emission to change it.

Transcription

1 PROJECTOR LOW-ANGLE ING LED ING SYSTEMS PRL SERIES u Technical specifications PRLnnB* Line lights projectors High intensity LED projectors which produce a line of intensive and narrow light. Specially designed for obtaining the ideal light for linear cameras. Otherwise, with matricial cameras, allow darkfield lighting (highlighting the small reliefs and cracks) in large areas or long distances. PRL7. Dimensions Length (L) = (nn x 2) + 6 Width = 35 Active surface RWD (mm) Focal length Weight (g) IP rating Mounting holes Length (L) = (nn x 2) F = 5mm F2 = 5mm F3 = infinite (nn x 69) + 66 IP Connection BN = +2V = Power cable Modifiers 2 Accessories 3 Identified as modifier. /F focal length by default. Select another focal length or diffuse emission to change it. (nn x 2) x Mx.7`6 Pre-cabled with free terminals 2xmm² Length=.8m ƒ ƒ2 ƒ3 D ibluedrive tech. N/A (*) Customizable lighting system composed by segments of 2mm of light emission window. The required length for each application is assembled from manufacturation preserving light homogeneity. The lighting model name will depend on the number of segments and will be composed as it is shown in the table below: PRL2B PRLB PRLnnB PRL3B N = No. of segments *nn = N x 2 Length = Nx2mm N nn (Nx2) u Instantaneous consumption (max.) TYPE C TYPE P TYPE S TYPE i N/A= Not available CUS = Custom PRLnnB* 3W x nn 3W x nn 22W x nn 8W x nn 3W x nn No Type P standard LED lighting systems in this series No Type S standard LED lighting systems in this series No Type i standard LED lighting systems in this series *WT -7C -525C -63C -85C -WC 7 () Environmental specifications and iconography legend in additional annex Z. and Z2 (3) Accessories are not-included. More information in accessories section. respectively. () Bear in mind that consumption table is only to be used as a guide. To refer to real values, (2) Focal Lengths or diffuse emission of PRL series projectors, identified as modifiers. If not please, consult product label when purchasing. indicated, default modifier will be /F. Please, consult the code to select a different one before ordering (additional annex Z2.). *OER REFERENCE = + WT / MODIFIERS

2 PRL SERIES - Line lights projectors PRL SERIES PRL7. 35 (nn x 2) + 6 (nn x 2).8m (nn x 2) x Mx.7 ` INPUT POWER REQUIRED EACH 5 SEGMENTS PRLnnB-EA All units in millimeters, if not indicated. 2cm 8. - % LUX vs LWD W/F W/F2 8 W/F % % LUX % % LWD (Light Working Distance in mm) Example of PRL captured image Brightness distribution of PRL2B-WC/F@5mm 27 DCM SISTEMES. All rights reserved. Product specifications and design are subject to change without prior notice. PRL2B-WC light intensity. 75

3 ADDITIONAL INFORMATION ZXA7. u Z. - Environmental Specifications PNP model (lighting systems with PNP modifier =/P) u Max. Operating Humidity Operating Temperature Storage Temperature Housing material Standards NPN model (by default) 85% non-condensing - ºC - 6ºC NPN chart of Vcontrol (Volts) vs Icontrol (ma) Anodized aluminium Z.2 - Control input NPN/PNP for Type C lighting systems of DOL, PLC, PLX, PRH series, PRC6C and PRC66B. PNP chart of Vcontrol (Volts) vs Icontrol (ma) Icontrol (ma) Input PNP OFF ON Vcontrol (Volts) PNP wiring for ON/OFF mode Icontrol (ma) ON OFF Input NPN NPN wiring for ON/OFF mode LED ING SYSTEM Vcontrol (Volts) NPN PUT (sinking) LED ING SYSTEM Electrical specifications to +6.8V +7.2V to +2V Working conditions Connection Delay from OFF to ON state Delay from ON to OFF state Bias voltage in control input Input impedance Compliance Light OFF Light ON 25ºC, VIN = 2V Direct to a PNP output K? IEC3-2 Type, 2 and 3 PNP PUT (sourcing) Electrical specifications to +6.8V +7.2V to +2V Working conditions Connection Delay from OFF to ON state Delay from ON to OFF state Bias voltage in control input Input impedance Light ON Light OFF 25ºC, VIN = 2V Direct to a NPN output 7.9V 7K9?

4 DCM Sistemes ADDITIONAL INFORMATION ZXA7. u Z.3 - ibluedrive control input wiring All ibluedrive products come together with a quick-start guide for connection and working conditions. Refer to ibluedrive Manual for extended information. NPN wiring for strobe or ON/OFF mode NPN PUT (sinking) u Z. - ibluedrive inline ibluedrive inline is the driver for ibluedrive technology integrated as a box of 65x33mm to the cable that goes from the lighting system to the connector. It is used when ibluedrive driver can not be integrated on chassis. See diagram: PNP wiring for strobe or ON/OFF mode A.5 TTL wiring for strobe or ON/OFF mode PNP PUT (sourcing) Detail A PIN 3 (CONTROL) PIN 2 () PIN (+) TO THE ING R5 LED STATUS INDICATOR x2 O = ON = OFF TPL PUT WARNING!: In continuous and powered mode, clamp driver to a metal surface for heat dissipation. In Strobe mode is not required, but recommended. Wiring for continuous mode Wiring for continuous dimming mode Kohms 27 DCM SISTEMES. All rights reserved. Product specifications and design are subject to change without prior notice.

5 ADDITIONAL INFORMATION ZXA7. u Z2. - Modifiers legend u Z2. - Technical drawings legend icon Description Code Narrow angle of emission Medium angle of emission (By default) /AN /AM Wide angle of emission Oval angle of emission = 23-2º (x) 7-8º (y) /AW /AO icon Description Optical axis Viewing window dimensions Lighting elements Light emission center Lighting surface dimensions D Diffuse emission /AD u Z2.5 - Colours & Wavelegths legend Polarizer filter /FPL icon Wavelength Colour Code CC Diffuser filter Dome hole of 6mm /FDR /CC 365nm nm 7nm UV- UV BLUE CC2 IP67 Dome hole of mm IP Rating = IP67 /CC2 /67 525nm 63nm 85nm/88nm GREEN RED IR /-88 PNP ƒ PNP input model 5mm focal Length /P /F WHITE RGB -W -RGB ƒ2 5mm focal Length /F2 ƒ3 Infinite focal Length /F /88 u Z2.2 - Accessories legend icon Description Serie Power cable/s Other cable/s VCB, VCC, VCD Series VCU, VCL u Z2.6 - Types of lighting legend icon Description Radial lighting Strobe and RGB controller/s VST, VSC Series Darkfield lighting effect. Low angle illumination Polarizer filter VPF, VPC Diffuser filter VDF Backlight illumination X Y Collimater filter on x axis Collimater filter on y axis VCFx VCFy Cloudy day lighting effect XY Collimater filter on xy axis VCFxy Bright field lighting effect Darkfield converter VRF Protector filter VPT Projector lighting Heat dissipator Fixing bracket VHD VBA, VBB, VBC Series Axial lighting u Z2.3 - ibluedrive Accessories legend u Z2.7 - Types of light legend icon Description Serie/Product Accessorie to configure ibluedrive devices: ibluedrive Box, ibluedrive USB VTA5A, VTA7A icon Description Direct light ibluedrive optocoupler ibluedrive potentiometer VTA2A VTA3B Diffuse light Ultra-diffuse light 2