CUSTOMER TECHNICAL MEMO # 79
|
|
|
- Cynthia Manning
- 6 years ago
- Views:
Transcription
1 CUSTOMER TECHNICAL MEMO # 79 Subject: Date: 7/8/09 Commercial Sliding Door, View-max Sliding Window & Double Hung Technical Manual Amendments From: Product Development Please be advised there have been changes to the Commercial Sliding Door, View-max Sliding Window and View-max Double Hung Technical Manuals. Refer below for a list of changes. Commercial Sliding Door Page 1.0 Technical Manual Release Notes updated Pages to quantities, formulas and section numbers amended, AD769 Flyscreen add on track added where applicable. View-max Sliding Window Page 1.0 Technical Manual Release Notes updated Pages to and to FS2 Flyscreen formulas amended View-max Double Hung Page 1.0 Technical Manual Release Notes updated Page Flyscreen Channel description & details amended Pages 3.4.2, 3.4.4, 3.4.6, 3.4.8, Flyscreen section number details amended Pages to Flyscreen formulas amended Page Flyscreen description & notes amended All the above revised pages have been included with this Technical Memo. The format has been set for double sided printing so you will be able to easily replace the pages in your manuals. You will need to ensure your printer is set to double-sided printing. If you have any questions please do not hesitate to contact your local ALSPEC Area Manager or Sales Office.
2
3 ALSPEC ALUMINIUM SYSTEMS TECHNICAL MANUAL Commercial Sliding Door Section 1.0 TECHNICAL MANUAL RELEASE NOTES This page is intended to record all changes to the COMMERCIAL SLIDING DOOR technical manual pages. It is therefore critical that all changes are recorded in the below AMENDMENTS box prior to release to our customer. Changes or additions to this manual will be itemised with a brief description and date when the amendments were made. It is important that a copy of this page be issued with the update and inserted as the first page in the customers technical manual. DATE Amendment Description Remove page Insert new page 01 / 09 / 2008 Technical manual initial release ~ ~ 01 / 02 / 2009 Contents ~ ~ 01 / 02 / 2009 Technical manual release notes / 02 / 2009 Specification / 02 / 2009 Load tables / 02 / 2009 Test report results / 02 / 2009 Test report results / 02 / mm OX standard sill water rating / 02 / mm OXX standard sill water rating / 02 / mm OX standard sill / HP water rating ~ / 02 / mm OX standard sill / HP water rating ~ / 02 / mm OX standard sill / HP water rating ~ / 02 / 2009 Extrusion profiles / 02 / 2009 Extrusion profiles / 02 / 2009 Extrusion profiles / 02 / 2009 Extrusion profiles ~ / 02 / 2009 Hardware components / 02 / 2009 Sliding flush sill detail with AS335 sub sill front view ~ / 02 / 2009 Sliding flush sill detail with AS335 sub sill back view ~ / 02 / 2009 Sliding HP sill detail with AS335 sub sill front view ~ / 02 / 2009 Sliding flush sill detail with AS335 sub sill back view ~ / 02 / 2009 Typical details to to / 02 / 2009 Cutting formula triple track / 02 / 2009 Cutting formula triple track bi part / 08 / 2009 Technical manual release notes revised AUGUST 2009 ISSUE B PAGE: 1.0
4 ALSPEC ALUMINIUM SYSTEMS TECHNICAL MANUAL Commercial Sliding Door Section 1.0 TECHNICAL MANUAL RELEASE NOTES Cont. DATE Amendment Description Remove page Insert new page 01 / 08 / 2009 New page added ~ / 08 / 2009 Cutting formulars revised PAGE: 1.1 AUGUST 2009 ISSUE
5 Commercial Sliding Door Extrusion cutting formula slide, fixed AUGUST 2009 ISSUE A PAGE: 3.5.1
6 Commercial Sliding Door Extrusion cutting formula fixed, slide, fixed PAGE: AUGUST 2009 ISSUE A
7 Commercial Sliding Door Extrusion cutting formula fixed, slide, slide, fixed AUGUST 2009 ISSUE A PAGE: 3.5.3
8 Commercial Sliding Door Extrusion cutting formula triple track PAGE: AUGUST 2009 ISSUE A
9 Commercial Sliding Door Extrusion cutting formula triple track bi part AUGUST 2009 ISSUE A PAGE: 3.5.5
10
11 ALSPEC ALUMINIUM SYSTEMS TECHNICAL MANUAL VIEW-MAX sliding window Section 1.0 TECHNICAL MANUAL RELEASE NOTES This page is intended to record all changes to the VIEW-MAX SLIDING WINDOW technical manual pages. It is therefore critical that all changes are recorded in the below AMENDMENTS box prior to release to our customer. Changes or additions to this manual will be itemised with a brief description and date when the amendments were made. It is important that a copy of this page be issued with the update and inserted as the first page in the customers technical manual. DATE Amendment Description Remove page Insert new page 01 / 08 / 2008 Technical manual initial release ~ ~ 01 / 02 / 2009 Contents page amended ~ ~ 01 / 02 / 2009 Technical manual release notes amended / 02 / 2009 Loading table explanation added / 02 / 2009 Specification amended / 04 / 2009 Contents page amended ~ ~ 01 / 04 / 2009 Technical manual release notes amended / 04 / 2009 Test report page number amended / 04 / 2009 Test report page added ~ / 04 / 2009 Extrusions, hardware, elevations, general, arrangement, cutting formulas, manufacturing drawings, glazing details to to / 08 / 2009 Technical manual release notes amended / 08 / 2009 Flyscreen cutting formulas amended / 08 / 2009 Flyscreen cutting formulas amended AUGUST 2009 ISSUE D PAGE: 1.0
12
13 VIEW-MAX sliding window Cutting formula OX & XX DG framing, std sill APRIL 2009 ISSUE B PAGE: 3.5.5
14 VIEW-MAX sliding window Cutting formula XOX 76mm S/glazed, std sill PAGE: AUGUST 2009 ISSUE C
15 VIEW-MAX sliding window Cutting formula XOX 76mm D/glazed, std sill AUGUST 2009 ISSUE C PAGE: 3.5.7
16 VIEW-MAX sliding window Cutting formula XOX 101.6mm S/glazed, std sill PAGE: AUGUST 2009 ISSUE C
17 VIEW-MAX sliding window Cutting formula XOX 101.6mm D/glazed, std sill AUGUST 2009 ISSUE C PAGE: 3.5.9
18 VIEW-MAX sliding window Cutting formula XOX DG framing, std sill PAGE: AUGUST 2009 ISSUE C
19 VIEW-MAX sliding window Cutting formula XOX 76mm S/glazed, high sill AUGUST 2009 ISSUE A PAGE:
20 VIEW-MAX sliding window Cutting formula XOX 76mm D/glazed, high sill PAGE: AUGUST 2009 ISSUE A
21 VIEW-MAX sliding window Cutting formula XOX 101.6mm S/glazed, high sill AUGUST 2009 ISSUE A PAGE:
22 VIEW-MAX sliding window Cutting formula XOX 101.6mm D/glazed, high sill PAGE: AUGUST 2009 ISSUE A
23 VIEW-MAX sliding window Cutting formula XOX DG framing, high sill AUGUST 2009 ISSUE A PAGE:
24 VIEW-MAX sliding window Cutting formula OXXO 76mm S/glazed, high sill PAGE: APRIL 2009 ISSUE
25 ALSPEC ALUMINIUM SYSTEMS TECHNICAL MANUAL VIEW-MAX double hung Section 1.0 TECHNICAL MANUAL RELEASE NOTES This page is intended to record all changes to the VIEW-MAX DOUBLE HUNG technical manual pages. It is therefore critical that all changes are recorded in the below AMENDMENTS box prior to release to our customer. Changes or additions to this manual will be itemised with a brief description and date when the amendments were made. It is important that a copy of this page be issued with the update and inserted as the first page in the customers technical manual. DATE Amendment Description Remove page Insert new page 01 / 03 / 2008 Technical manual initial release ~ ~ 28 / 05 / 2008 Part number reference corrected in the example / 05 / 2008 Glass height cut size corrected & rail number corrected / 05 / 2008 Glass height cut size corrected / 05 / 2008 Glass height cut size corrected / 07 / 2008 Full re-issue with new profiles and format All All 01 / 02 / 2009 Technical manual release notes amended / 02 / 2009 Specification amended / 02 / 2009 Loading table explanation page added / 02 / 2009 Test report page updated / 02 / 2009 Hardware components pages amended to to / 02 / 2009 Max sash height amended / 02 / 2009 Page number amended / 02 / 2009 Mohair deleted 3.4.1, 3.4.3, 3.4.5, 3.4.7, 3.4.9, , 3.4.3, 3.4.5, 3.4.7, 3.4.9, / 02 / 2009 Jamb preparation amended / 02 / 2009 Diameter symbols amended & & / 02 / 2009 Sash stop note amended / 02 / 2009 Jamb assembly amended / 02 / 2009 Installation steps amended to to / 07 / 2009 Contents page 1 amended ~ ~ 01 / 07 / 2009 Technical Manual Release Notes Amended / 07 / 2009 New page added ~ / 07 / 2009 Window Stop notes and dimension added JULY 2009 ISSUE B PAGE: 1.0
26 ALSPEC ALUMINIUM SYSTEMS TECHNICAL MANUAL VIEW-MAX double hung Section 1.0 TECHNICAL MANUAL RELEASE NOTES Cont. DATE Amendment Description Remove page Insert new page 01 / 07 / 2009 Window Stop notes added / 07 / 2009 Window Stop note amended / 07 / 2009 Step 1 notes amended / 08 / 2009 Technical manual release notes revised / 08 / 2009 Flyscreen channel amended / 08 / 2009 Flyscreen details amended 3.4.2, 3.4.4, , , 3.4.4, , / 08 / 2009 Flyscreen formulas amended / 08 / 2009 Flyscreen installation details amended PAGE: 1.1 AUGUST 2009 ISSUE A
27 VIEW-MAX double hung Extrusions AUGUST 2009 ISSUE A PAGE: 3.1.7
28
29 VIEW-MAX double hung Vertical detail of 76mm framing FEBRUARY 2009 ISSUE A PAGE: 3.4.1
30 VIEW-MAX double hung Horizontal detail of 76mm framing PAGE: AUGUST 2009 ISSUE A
31 VIEW-MAX double hung Vertical detail of 76mm framing over/under light FEBRUARY 2009 ISSUE A PAGE: 3.4.3
32 VIEW-MAX double hung Horizontal mullion detail of 76mm framing PAGE: AUGUST 2009 ISSUE A
33 VIEW-MAX double hung Vertical detail of 101.6mm framing FEBRUARY 2009 ISSUE A PAGE: 3.4.5
34 VIEW-MAX double hung Horizontal detail of 101.6mm framing PAGE: AUGUST 2009 ISSUE A
35 VIEW-MAX double hung Vertical detail of 101.6mm framing over/under light FEBRUARY 2009 ISSUE A PAGE: 3.4.7
36 VIEW-MAX double hung Horizontal mullion detail of 101.6mm framing PAGE: AUGUST 2009 ISSUE A
37 VIEW-MAX double hung Vertical DG detail of 101.6mm framing over/under light FEBRUARY 2009 ISSUE A PAGE: 3.4.9
38 VIEW-MAX double hung Horizontal DG detail of 101.6mm framing PAGE: AUGUST 2009 ISSUE A
39 VIEW-MAX double hung Cutting formula 76mm framing single glazed AUGUST 2009 ISSUE A PAGE: 3.5.1
40 VIEW-MAX double hung Cutting formula 76mm framing double glazed PAGE: AUGUST 2009 ISSUE A
41 VIEW-MAX double hung Cutting formula 101.6mm framing single glazed AUGUST 2009 ISSUE A PAGE: 3.5.3
42 VIEW-MAX double hung Cutting formula 101.6mm framing double glazed PAGE: AUGUST 2009 ISSUE A
43 VIEW-MAX double hung Cutting formula DG framing AUGUST 2009 ISSUE A PAGE: 3.5.5
44
45 VIEW-MAX double hung Upper sash installation step 8 SEPTEMBER 2008 ISSUE PAGE:
46 VIEW-MAX double hung Screen installation g x 13 csk 450ctrs L3455 Flyscreen channel Retainer clip rivet to screen so that screen centralises once fit to window NOTE: retainer clips can be fitted inside L3455 when screening frame system PAGE: AUGUST 2009 ISSUE A
CUSTOMER TECHNICAL MEMO # 240
CUSTOMER TECHNICAL MEMO # 240 Subject: Air-Flo Technical Manual and Wall Chart Extrusions update Date: August 2015 Good Morning, Please note the Air-Flo Technical Manual extrusion pages have been revised
DOUBLE GLAZED PRODUCT 2 pane servery 16mm double hung in alum frames
VS P16 v - medium box Jun 013 DOULE GLZED PRODUCT pane servery 16mm double hung in alum frames (bottom pane - medium box, double glazed - Interlocking model) vertical section - 80 31,5 head (by others)
Series 464 Sashless Double-Hung Window
Series 464 Sashless Double-Hung Window ARCHITECTURAL SERIES Photo courtesy of Evolution Windows & Doors DATE: MAY 2013 REPLACES: MARCH 2008 ARCHITECTURAL SERIES Series 464 KEY FEATURES/PERFORMANCE CHARACTERISTICS
2 pane servery 10mm sashless double hung in aluminium frames (bottom pane fixed - small box) with aluminium covers vertical section A-A
VS P10 v - small box in aluminium frames (bottom pane - small box) vertical section - 60 6 head (by others) VS 10mm head standard handle (clear acrylic) pulley and cord arrangement glass height = (opening
Architectural Information Series 614 ClearVENT Double-hung Window Design Features Australian registered design
Architectural Information Page: 27. 1 Introduction Design Features This full vision vertical sliding sashless double-hung window has been designed to complement our existing quality product range including:
173.1 INTRODUCTION SERIES 453 RESIDENTIAL DOUBLE-HUNG WINDOW INTO FRAMING. Australian Registered Design. Design Features :
INTRODUCTION DATE JUN 06 REPLACES NOV 04 SCALE NOT TO SCALE Design Features : Vertical sliding double-hung sashes inlaid directly into shopfront framing. Flyscreens tuck into dedicated recess in the jamb
2 pane servery 6mm sashless double hung in aluminium frames (top pane fixed - small box) with aluminium covers vertical section A-A
VS 2P6 v - small box in aluminium frames (top pane - small box) vertical section - 68,4 12,6 head (by others) head adaptor pulley and cord arrangement glass height = (opening + 44mm) / 2 6mm lapseal 6mm
2 pane servery 6mm sashless double hung in aluminium frames (bottom pane fixed - small box) with aluminium covers vertical section A-A
VS P6 v - small box in aluminium frames (bottom pane - small box) vertical section - 68,4 1,6 head (by others) head adaptor standard handle (clear acrylic) aluminium lift handle (optional) for aluminium
Architectural Information Page: Series 602 Magnum Sliding Window Introduction. Design Features : Date: Aug 03 Replaces: Scale: Not to scale
Design eatures : Architectural Information Page: 17. 1 Introduction Date: Aug 03 Replaces: Scale: Not to scale This high performance sliding window has been designed to complement our existing high quality
2 AllSeasons Awning and Casement Windows
2 AllSeasons Awning and Casement Windows Summary Performance Awning Casement and Fixed windows Requirement Performance Comments Water and Air Pressure 455Pa 2130Pa 1000Pa 2300Pa Exceeds NZS 4211 2008 Weight
Est Aluminium Profile Stockists
. crealco PA L A C E CREALCO PALACE PRODUCT MANUAL Revision: November 2012 . crealco PA L A C E Index Legal Disclaimer 4 Profile Identification 5-7 Hardware Identification 8 Double Track Configurations
Bradnam's SIGNATURE SLIDING WINDOW 100 COMPONENTS
Bradnam's windows & doors SIGNATURE SLIDING WINDOW 100 05-01 83770 / S8100C SCREW SQ 8G X 1.0 CSK SS #2 (FIXED SASH) 83966 / S8050P SCREW SQ 8G X 0.5 PAN SS #2 (FSF BLOCK) 83963 / S8100PP2 SCREW SQ 8G
InFrame TM Interior Framing System
JANUARY, 2017 InFrame TM Interior Framing System FEATURES 1 Features x 6" sightline, interior partition framing Flush glazed, center plane glass application Screw spline fabrication 1/8", 1/4", and 3/8"
. crealco V I S TA F O L D B O T T O M R O L L E R F O L D I N G D O O R Index Legal Disclaimer 4 Profile Identification 5-7 Hardware Identification 8
. crealco V I S TA F O L D B O T T O M R O L L E R F O L D I N G D O O R VISTAFOLD SYSTEM PRODUCT MANUAL 2013 Wispeco (Pty) Ltd, All Rights Reserved Revision: June 2013 . crealco V I S TA F O L D B O T
Interior framing system Integrated entrance framing allowing Kawneer standard entrances or other specialty entrances to be incorporated
JULY, 2014 InFrame TM FEATURES 1 Features x 6" sightline, interior partition framing Flush glazed, center plane glass application Screw spline fabrication 1/8", 1/4", and 3/8" infill options Permanodic
182.1 INTRODUCTION SERIES 462 ARCHITECTURAL COMMERCIAL SLIDING WINDOW. Design Features : Australian Registered Design.
INTRODUCTION DATE JUN 06 REPLACES NOV 04 SCALE NOT TO SCALE Design Features : The 26mm thick heavy duty sliding window sashes have been fitted into custom head and sill and jamb inlay adaptor that snaps
SIG Awning / Casement / Fixed Lite 100
TYPICAL FRAME ASSEMBLY - AWNING WINDOW 07-01 85720-2 GASKET EXT FL JAMB 100 BS201 (3471) HEAD HINGED 100 86064 TRIM FIN A 83963 SCREW SQ 8G X 1.0 PAN PP SS #2 85737 GASKET EXT FL TRANSOM 85720-1 86065
Lift & Slide W6400. (rev )
Copyright 2010 Pacific Architectural Millwork All rights reserved. No part of this manual may be reproduced or transmitted in any form or by any means without permission by Pacific Architectural Millwork.
Versatrim Side-Snap Frame
Versatrim Side-Snap Frame net door width finished opening width rough opening width (finished opening width plus 1 1/2") Figure 1 Cross section of strike and hinge jambs The rough opening width is equal
Installation Instructions Window Opening Control Device. Single-Hung & Sliding Windows with No Vent Latches
Single-Hung & Sliding Windows with No Vent Latches These s (WOCDs) work with single-hung windows and sliding windows with one operational and one stationary sash in the confi gurations of either XO or
Extrusions GB-3-IN01. Updated: Scale: REV: - This Drawing is Protected by Copyright Altus NZ Ltd.
Extrusions Updated: N/A Scale: N.T.S REV: - Dwg Dwg Revision Rev No Description Description Date GB-3-IN01 Index Page - - - - - GB-3-001 Extrusions - - - - - GB-3-002 Extrusions - - - - - GB-3-003 Extrusions
ASPEN 530 T SINGLE HUNG. Each lite of glass was channel glazed with a reducing vinyl gasket.
TESTED FOR Date : July 29, 2004 FLEETWOOD ALUMINUM PRODUCTS Page : 1 of 5 2485 Railroad Street Corona, CA 91720 1.0 PURPOSE The purpose of this report is to present the testing methods employed and the
Architectural Information Page: Series 514 Double-hung Window Standard Wrap Around Sash Introduction
Design Features Architectural Information Page: 22. 1 Standard Wrap Around Sash Introduction Scale: Not to scale 1. Successfully tested for compliance with Australian Standard AS 2047. 2. Optional mullion
Eagle Double-Hung Replacement Sash Kit Measuring Guidelines
Eagle Double-Hung Replacement To assist you with measuring for Eagle double-hung replacement sash products, we ve included typical section details of double-hung products comparable to what may be in your
Series 601 MAGNUM Sliding Window
Photo courtesy of David Reid Homes. Windows supplied by Lifestyle Windows. DATE: NOVEMBER 2009 REPLACES: AUGUST 2003 KEY EATURES / PERORMANCE CHARACTERISTICS Scale: NOT TO SCALE Tested for compliance with
9 X 9 REMOVABLE TYPE ALUMINUM WINDOW BARS INSTALLATION INSTRUCTIONS Import Note : 9 X 9 Spacing Removable Type Installation is covered in this
Import Note : 9 X 9 Spacing Removable Type Installation is covered in this Instruction. Removable Bars Only Mount in Recess Position ( Between Window Jamb/ Frame ) The spacing between horizontal bars is
Series 525 LouvreMASTER Adjustable Louvre Window
Series 525 LouvreMASTER Adjustable Louvre Window DESIGNER SERIES Photo courtesy of Hanlon Windows Australia DATE: NOVEMBER 2009 REPLACES: AUGUST 2003 DESIGNER SERIES Series 525 KEY EATURES / PERORMANCE
patio door installation guide
patio door installation guide Measuring & surveying p2 Mechanical jointing p5 Installation p5 Hardware adjustment p7 Sealing of outer frame p7 Cleaning p7 Walk through clearances p8 Minimum and maximum
1010 Sliding Mall Front
JUNE, 2018 FEATURES 1 Features Screw spline fabrication 1/4" and 1" glazing Permanodic TM anodized finishes in seven standard choices Painted finishes in forty-two standard choices and unlimited custom
Series 514 Residential Double Hung Window
Photo courtesy of Vista Windows DATE: NOVEMBER 2009 REPLACES: AUGUST 2003 KEY FEATURES / PERFORMANCE CHARACTERISTICS Replaces: aug 03 Scale: not to scale Successfully tested for compliance with AS 2047.
.crealco Interlockers & Meeting Stiles Limitation Chart Cross Sectional Detail Sidelight Bottom Rail Assembly of Side Light Adaptor
. crealco E L I T E ELITE HORIZONTAL PRODUCT MANUAL 2013 Wispeco (Pty) Ltd, All Rights Reserved Revision: November 2013 . crealco E L I T E INDE Legal Disclaimer 3 Profile Identification 4 Hardware Identification
MODEL: STORMMAX-MSD-FG-5000-WET
MODEL: STORMMAX-MSD-FG-5000-WET MEDIUM STILE HURRICANE RESISTANT DOORS WITH FG-5000 FRAMES MONOLITHIC LAMINATED GLASS - WET GLAZED OHSC H6331 O.H.C.C H6333 MID-PANEL MEETING STILES HD6184 HD6186 VD6145
Design Considera ons & Installa on Guidance
Design Considera ons & Installa on Guidance LiteSpace Interior Aluminum Framing provides a slim profile for glass walls and office fronts. It is designed to be cut to length on project sites for finished,
MODEL: STORMMAX-MSD-FG-5000-DRY
MODEL: STORMMAX-MSD-FG-5000-DRY MEDIUM STILE HURRICANE RESISTANT DOORS WITH FG-5000 FRAMES MONOLITHIC LAMINATED GLASS - DRY GLAZED OHSC H6331 O.H.C.C H6333 MID-PANEL MEETING STILES HD6184 HD6186 VD6145
General Information... Elevation Notes... Elevation Notes Transom... Light Cut Information... Clear Opening Design Data Table 1 & 2 Panel...
TABLE OF CONTENTS General Information..................................... Elevation Notes......................................... Elevation Notes Transom................................. Light Cut Information....................................
Installation Instruction 3-D Model 3D 03/01/17. 0 Flush Siding Horizontal System N/C WPS, Inc.
I B D L K C E G M F A H J Installation Instruction 3-D Model 3D 03/01/17 Detail: System Type: Scale: Drawn By: 0 Flush Siding Horizontal System N/C WPS, Inc. Wall Panel System, Inc. 15/16" 1 1/4" Bottom
Versatrac R-System Stock Extrusions, Clips and Accessories
Versatrac R-System Extrusions are available in 300 series (for 3 3/4" walls) and 400 series (for 4 7/8" walls). Standard finishes are Satin Metallic Bronze, Satin Black, Satin White Baked Enamel, and Clear
JAMESTOWN175 SERIES Fixed, Projected and Casement Steel Windows
Fixed, Projected and Casement Steel Windows Hope s Jamestown Series steel windows are manufactured from heavy custom hot-rolled steel profiles. All frames, ventilators and muntin bars are -/" in depth.
Technical Guide M. MMultiSlide Doors. Technical Guide M1
Technical Guide M MultiSlide Doors M Technical Guide M1 Loewen MultiSlide MultiSlide doors provide large dramatic openings for the transition from indoor and outdoor living spaces. With an easy, smooth
IF INSTALLING ANY OF THE PORTMAN SELF CLOSING SYSTEMS, PLEASE READ THE CORRESPONDING FITTING INSTRUCTIONS SUPPLIED WITH THE CLOSING SYSTEM FIRST
Set A Set B PFD60 Fire Door Kit FITTING INSTRUCTIONS IF INSTALLING ANY OF THE PORTMAN SELF CLOSING SYSTEMS, PLEASE READ THE CORRESPONDING FITTING INSTRUCTIONS SUPPLIED WITH THE CLOSING SYSTEM FIRST SUGGESTED
6400, 8400 and 9400 Series Sliding Patio Door
Contemporary 3 Panel Classic 5 Panel French Panel 6400, 8400 and 9400 Series Sliding Patio Door (O) Fixed Panel Left (X) Operating / Mullion Panel Right (X) Operating / Lock Panel Left (O) Fixed Panel
MODEL: STORMMAX-MSD-FG-5100-WET
MODEL: STORMMAX-MSD-FG-5100-WET MEDIUM STILE HURRICANE RESISTANT DOORS WITH FG-5000 FRAMES MONOLITHIC LAMINATED GLASS - DRY GLAZED O.H.C.C H6333 HD6184 MID-PANEL HD6186 MEETING STILES VD6145 JAMB V6331
46, 66, Page /01/17
46, 66, 86 46 Only Instructions Page 29-31 www.hallsgreenhouses.com Please refer to website for the most up to date instructions. 05/01/17 333 1106 No. 6 x 16mm Long 711 F B D E C A G I,H J K L M
Architectural Information Page: Series 541 Sliding Door Introduction
Design Features Architectural Information Page: 71. 1 Introduction Date: Oct 04 Replaces: Aug 03 Scale: Not to scale 1. Successfully tested for compliance with Australian Standard AS 2047. 2. Optional
GLENWOOD 510 C Horizontal Slider
TESTED FOR Date : October 28, 1998 FLEETWOOD ALUMINUM PRODUCTS, Inc. Page : 1 of 5 2485 Railroad Street Corona, CA 91720 1.0 PURPOSE The purpose of this report is to present the testing methods employed
1200 SERIES 2 PANEL DOOR rev.1 DETAILED INSTALLATION INTRUCTIONS
1200 SERIES 2 PANEL DOOR 10.2013 rev.1 DETAILED INSTALLATION INTRUCTIONS GENERAL: Door elevations shown in these instructions are as viewed from the outside. X denotes the active or moving panel(s). O
In-line Patio Fabrication & Installation
In-line Patio Fabrication & Installation Instructions 2 Pane Patio p2 Cutting and Preparation p2 Welding and Cleaning p2 Assembly p2 Fabrication Instructions for 3/4 Pane Lock Style p3 Installation (removable
This declaration of performance is issued under the sole responsibility of the manufacturer as identified above in point 4. Warroad, MN Oct 15, 2013
Marvin Windows and Doors P.O. Box 100 401 State Ave N Warroad, MN 56763 USA EC-Declaration of Performance Whereas 1. All products subject to this declaration are identified by the unique CPD number assigned
9 X 12 FIXED TYPE ALUMINUM WINDOW BARS INSTALLATION INSTRUCTIONS Import Note : 9 X 12 Spacing Fixed Type Installation is covered in this Instruction.
Import Note : 9 X 12 Spacing Fixed Type Installation is covered in this Instruction. Fixed Bars can be Mount in Recess Position ( Between Window Jamb/ Frame )or Surface Mount (Face Of Wall) This Fixed
ASS 70 FD folding / sliding door. Installation Guide
ASS 70 FD folding / sliding door Installation Guide IMPORTANT! These doors should be fitted by competent and trained installers. Please read these instructions thoroughly before beginning the installation.
BuildingEnvelope Oldcastle ( ) -
BuildingEnvelope 1-866-Oldcastle (653-2278) - www.obe.com SERIES 3000 THERMAL MULTIPLANE STOREFRONT 2" X 4-1/2" / / BACK SET Elev-Series-3000-MP-BackSet H0950-SubSill-Splice-EndDam H4501-Hrz-OutsideGlz
This declaration of performance is issued under the sole responsibility of the manufacturer as identified above in point 4.
Marvin Windows and Doors P.O. Box 100 401 State Ave N Warroad, MN 56763 USA EC-Declaration of Performance Whereas 1. All products subject to this declaration are identified by the unique CPD number assigned
MAX Bifold Door. [ [ Bifold Door
MAX TM 1 Bifold Door 225 EDGE Architectural Glazing Systems: MAX Technical Manual, January 2015 225 2 Some typical configurations are depicted below from 2 to panel doors. Many more panel configurations
9 X 12 REMOVABLE TYPE ALUMINUM WINDOW BARS INSTALLATION INSTRUCTIONS Import Note : 9 X 12 Spacing Removable Type Installation is covered in this
Import Note : 9 X 12 Spacing Removable Type Installation is covered in this Instruction. Removable Bars Only Mount in Recess Position ( Between Window Jamb/ Frame ) The horizontal bars spacing are 12 The
Keeping Millions of Windows Closed For Over 65 Years
Keeping Millions of Windows Closed For Over 65 Years H1 Hung Hardware Selection Guide Choosing the correct hung hardware is dependent upon the window profile and mounting space. There are two main methods
TESTED FOR Report No. : A04H-009 Date : February 10, 2004 FLEETWOOD ALUMINUM PRODUCTS, INC. Page : 1 of Railroad Street Corona, CA 91720
TESTED FOR Date : February 10, 2004 FLEETWOOD ALUMINUM PRODUCTS, INC. Page : 1 of 5 2485 Railroad Street Corona, CA 91720 1.0 PURPOSE The purpose of this report is to present the testing methods employed
STAIRCASES STAIRCASES I DOORS I WINDOWS
STAIRCASES I DOORS I WINDOWS STAIRCASES Stair production at ARU Grupp and supported by ARU Joinery is based on 12 years of experience combined with world-class software solutions and CNC technology. _
Versatrac R-System Stock Extrusions, Clips and Accessories
Versatrac R-System Extrusions are available in 300 series (for 3 3/4" walls) and 400 series (for 4 7/8" walls). Standard finishes are Satin Metallic Bronze, Satin Black, Satin White Baked Enamel, and Clear
AA TM 3900 THERMAL SLIDING DOOR
OCTOBER, 2010 AA TM 3900 THERMAL SLIDING DOOR FEATURES 1 Features High performance ratings for structural, air infiltration, thermal efficiency and water resistance. Tested to applicable North American
Vertical Slider Section Detail
Vertical Slider Section Detail PRODUCT GUIDE Main & Bead Profiles 128 42 69 VS01 - Outer frame 150 139 210 189 60 52 52 52 48 30 42 60 18 72 90 18 60 VS02 - Cill VS14 - Cill 18 VS03 - Top Sash VS04 - Standard
Visions 2000 Single Hung Tilt Window Parts Reference Catalog
Visions 2000 Single Hung Tilt Window Parts Reference Catalog (Includes Parts and Information for Single Hung Tilt Picture and Basement and Miscellaneous Parts for Single Hung Tilt Oriel and Single Hung
Andersen Complementary Clad Casement Windows (2005 to Present)
Andersen Complementary Clad Casement Windows (2005 to Present) What s in This Section Clad Casement Windows... Page 3 Part Illustrations... 3 Parts Illustration - Standard Casements... 3 Parts Illustration
BuildingEnvelope Oldcastle ( ) -
BuildingEnvelope 1-866-Oldcastle (653-2278) - www.obe.com SERIES 3000 THERMAL MULTIPLANE STOREFRONT 2" X 4-1/2" / / FRONT SET Elev-Series-3000-MP-FS H0950-SubSill-Splice-EndDam H4101-Hrz-OutsideGlz H4102-Hd-OutsideGlz
Non-Reinforced Joining Guide (2-Way Horizontal and Vertical Joining) for Andersen 200 Series Tilt-Wash Double-Hung and Transom Windows
(2-Way Horizontal and Vertical Joining) for Andersen 200 Series Tilt-Wash Double-Hung and Transom Windows Congratulations! You have just purchased one of the many fine Andersen products. Proper assembly,
Sliding Glass Door Assembly and Installation Guide
Sliding Glass Door Assembly and Installation Guide Index Door System Components and Hardware The following components are needed to complete the installation of your Sliding Patio Door unit. Check all
Storefront Installation Guide
Storefront General Notes: 1. Check Contract Documents and Shop Drawings. Understand and clarify any Field Verify Notes and approvals of drawings and products to be familiar with the project. Installation
Sliding Doors S l i d i n g W i n d o w s R o l l e r S h u t t e r s
Sliding Doors S l i d i n g W i n d o w s R o l l e r S h u t t e r s The SALIENT 55 sliding window system The SALIENT 70 sliding window and door system The SALIENT 90 heavy-duty sliding door and window
XL JOINERY LTD LA PORTE VISTA MODULAR 3 ASSEMBLY INSTRUCTIONS
XL JOINERY LTD LA PORTE VISTA MODULAR 3 2090mm High x 4687mm Wide ASSEMBLY INSTRUCTIONS READ AND UNDERSTAND THESE INSTRUCTIONS FULLY PRIOR TO STARTING INSTALLATION. IT IS STRONGLY RECOMMENDED THAT A COMPETENT
BuildingEnvelope Oldcastle ( ) -
BuildingEnvelope 1-866-Oldcastle (653-2278) - www.obe.com SERIES 3000 THERMAL MULTIPLANE STOREFRONT 2" X 4-1/2" / 1" GLAZING / CENTER SET Elev-Series-3000-MP-CenterSet H0901-Horiz-OutsideGlz H0902-Head-OutsideGlz
Side Light Frame Pack Assembly Instructions
Please read this complete set of assembly instructions before starting the installation and only when you understand the construction method start to follow the step by step guide. IDENTIFY THE PACK CONTENTS
IMPORTANT INSTALLATION GUIDE VALENCIA ANGLE CORNER SHOWER READ ALL INSTRUCTIONS CAREFULLY BEFORE STARTING THE INSTALLATION
INSTALLATION GUIDE VALENCIA ANGLE CORNER SHOWER SEALANT REQUIRED TO COMPLETE THIS INSTALLATION: (Supplied) Sika Sikasil NG (Arctic White) To seal the WHITE shower door and returns to the shower tray. Usage:
SLIDING MECHANISM TROLLEY CATCH TROLLEY ASSEMBLY FLOOR GUIDE
Set A Set B PFD30 Fire Door Kit FITTING INSTRUCTIONS For use with 44mm thick doors only For Single and Double doors IF INSTALLING A TOUCH LATCH, PLEASE READ THE CORRESPONDING FITTING INSTRUCTIONS FIRST
Side Light Frame Pack Assembly Instructions
Side Light Frame Pack Assembly Instructions Please read this complete set of assembly instructions before starting the installation and only when you understand the construction method start to follow
INSTALLATION INSTRUCTIONS FOR A&L PRODUCTS
INSTALLATION INSTRUCTIONS FOR A&L PRODUCTS AUGUST 2017 1 RECOMMENDED BUILDING IN-DETAIL Should you require further information, please contact A&L Windows on 1800 441 414 2 IMPORTANT IMPORTANT Allow Vinyl
SLIDING MECHANISM TROLLEY CATCH TROLLEY ASSEMBLY FLOOR GUIDE
Set A Set B P7001 Standard Kit FITTING INSTRUCTIONS For use with 44mm thick doors only For Single and Double doors IF INSTALLING A TOUCH LATCH, PLEASE READ THE CORRESPONDING FITTING INSTRUCTIONS FIRST
Revit Content. RFA 2030 Bi Fold & Sliding Doors TWO SIDED BIFOLD DOORS 2 PANELS PATIO TWO SIDED SLIDING DOORS 3 PANELS PATIO
ONE SIDED BIFOLD DOORS 2 PANELS TWO SIDED BIFOLD DOORS 2 PANELS TWO SIDED SLIDING DOORS 4 PANELS PATIO TWO SIDED SLIDING DOORS 2 PANELS PATIO ONE SIDED BIFOLD DOORS 2 PANELS TWO SIDED BIFOLD DOORS 2 PANELS
LEADING WINDOW & DOOR SYSTEMS
intec LEADING WINDOW & DOOR SYSTEMS Wintec Aluminium Since our beginning in 1997, we have developed a range of window and door products that are innovative, functional and stylish. Wintec Aluminium windows
Aluminium Window Scheme to BS4873 & PAS24:2016
SCOPE OF CERTIFICATION Aluminium Window Scheme to BS4873 & PAS24:2016 Manufacturer of Enhanced Security Windows in accordance with the Exova BM TRADA Q-Mark Scheme requirements. (Check with Secured by
UNIT SECTIONS Aluminum-Clad Exterior Wood Collection
Wood Collection FIXED SILL SILL SILL SILL Solid Mahogany Core with Mahogany Veneer Painted Pine Water resistance is 0 psf for doors with low profile sill. W-ISD-28 Wood Collection FIXED JAMBS LOCK JAMB
Design Features : INTRODUCTION SERIES 704 ARCHITECTURAL SlideMASTER SLIDING DOOR. Australian registered design.
INTRODUCTION DATE DEC 07 REPLACES JUN 06 SCALE NOT TO SCALE Design Features : Series 704 has been designed as an internal sliding door that can be fabricated in numerous configurations: 'XF', 'FX', 'FXF',
Heavy Wall Applied Stop Tube Frame and Door Installation
INSTALLATION INSTRUCTIONS Heavy Wall Applied Stop Tube Frame and Door Installation Read all instructions before beginning installation. These instructions are provided to help prevent installation problems
Contemporary 3 Panel Classic 5 Panel French Panel
Contemporary 3 Panel Classic 5 Panel French Panel (X) Operating / Lock Panel Left (O) Fixed Panel Right Note : Glazing Beads For All Panel Face To The Exterior 2 Panel XO Left Is Shown Above Opposite =
Series 424 CentreGLAZE Framing
Series 424 CentreGLAZE Framing Double Glazed 102mm COMMERCIAL SERIES Photo courtesy of All Weather Windows DATE: MAY 2013 REPLACES: MARCH 2008 COMMERFIAL FRAMING Series 424 KEY FEATURES/PERFORMANCE CHARACTERISTICS
Premium Single Dutch Doors Assembly & Installation Instructions
Premium Single Dutch Doors Assembly & Installation Instructions Premium Single Dutch Door Instructions General Notes; -Read the entire instructions before you begin. -Wear appropriate safety gear when
Weather Shield Awning and Scena Vu Wood Window Parts Reference Catalog
Weather Shield Awning and Scena Vu Wood Window Parts Reference Catalog #1024040 (03/02) Weather Shield Mfg., Inc. Medford, WI 54451 715/748-2100 Table of Contents Awning and Scena Vu Wood Window Parts
INSTALLATION INSTRUCTIONS
MARCH, 2009 PART NUMBER 590-500 1 INSTALLATION INSTRUCTIONS 2 INDEX MARCH, 2009 INSTALLATION INSTRUCTIONS CONTENTS These instructions show the general installation sequence and procedure for typical installation.
SECTION A4...IMPACT RATED ENTRANCES* 350 IR/500 IR ENTRANCES ENTRANCE HARDWARE OFFERINGS... A4/5
CONTENTS SECTION A4...IMPACT RATED ENTRANCES* Impact Rated Entrances CONTENTS PAGE FINISH GROUPS... A4/3 350 IR/500 IR ENTRANCES ENTRANCE HARDWARE OFFERINGS... A4/5 A4/1 350 IR/500 IR BASE DOOR DOOR CHASSIS...
Method of Build 1. Fire. Sound
Method of Build 1 General Viso Fire & Acoustic in the solid form differs from most other systems as it can be erected using 12.5mm & 15.0mm boards within the same Aluminium framework. Also hidden fix board
ASS 70.HI Lift/Sliding and Sliding Doors Installation Guide
ASS 70.HI Lift/Sliding and Sliding Doors Installation Guide 2 Schueco ASS 70.HI Lift/Sliding and Sliding Doors Installation Guide Installation guide IMPORTANT The ASS 70.HI door should be fitted by competent
40mm Thermoclick. Type II Class 1 Clear Satin Anodize - 201R1 (Mid Grade Commercial)
http://www.sundancesupply.com 40mm Thermoclick Type II Class 1 Clear Satin Anodize - 201R1 (Mid Grade Commercial) U-Profile 12' Lengths $39 Out System offers a complete set of extrusions and accessories
Andersen Complementary Clad French Casement Windows (2005 to Present) What's in This Section. Clad French Casement Windows...
Andersen Complementary Clad French Casement Windows (2005 to Present) What's in This Section Clad French Casement Windows... Page 3 Part Illustrations... 3 Parts Illustration - Operating Windows... 3 Parts
Non-Reinforced Joining Guide (1-Way Vertical or Horizontal) for Andersen 200 Series Tilt-Wash Double-Hung Windows and Complementary Products
(1-Way Vertical or Horizontal) for Andersen 200 Series Tilt-Wash Double-Hung Windows and Complementary Products Non-Reinforced Joining Guide Congratulations! You have just purchased one of the many fine
Series Residential Sliding Window
Series 502-504 RESIDENTIAL SERIES Photo courtesy of MidCity Windows DATE: NOVEMBER 2009 REPLACES: AUGUST 2003 RESIDENTIAL SERIES Series 502-504 KEY FEATURES / PERFORMANCE CHARACTERISTICS Replaces: aug
C D. Secondary Glazing Fixed Unit. Do not scale 1 to 1. Frame 301 Face Fix. 19.8mm. Typical Elevation. Top hung over fixed.
Secondary Glazing Fixed Unit 19.8mm 14.0mm Frame 301 Face Fix Top hung over fixed Fixed unit Fixed unit using overlap section 310 Glazing available in 4mm 6mm and 6.4mm Laminate Glass o not scale 1 to
XL-GC03 Sliding Door Lock Installation Manual PAT XL-GC06 Sliding Door Hanger Installation Manual XL-GC08 Sliding Door Lock Guide Installation Manual
XL-GC0 Sliding Door Lock Installation Manual PAT XL-GC0 Sliding Door Hanger Installation Manual XL-GC0 Sliding Door Lock Guide Installation Manual Read all instructions carefully before installation. Before
SITELINE CLAD-WOOD WINDOW DOUBLE-HUNG TABLE OF CONTENTS
TABLE OF CONTENTS 1 GENERAL INFORMATION Dimensional Windows Siteline Clad Double-Hung windows may be specified as "dimensional", by adjusting the desired rough opening width or height. Siteline Clad Double-Hung
PRODUCT MANUAL. November A product of crealco WISPECO. Aluminium. creative aluminium
November 2017 A product of creative aluminium WISPECO Aluminium LEGAL DISCLAIMER General Documentation Disclaimer This manual is intended as a manufacturing and installation advisory document. For correct
Installation Guide. WarmCore. Folding Sliding door system. Glass Packing. Pre-Installation. Removing the Existing Door.
WarmCore Installation Guide Pre-Installation Glass Packing p5 Removing the Existing Door Glazing Sequence p6 Preparing the Opening Glass Packing Locations for Toe & Heel p6 Door Alignment Sill Options
SSG Series Product Assembly Manual 2014 SSG SECONDARY GLAZING
SSG Series Product Assembly Manual 2014 SSG SECONDARY GLAZING SSG10.1.ii 06.14 SSG Secondary Glazing Introduction The Company Senior Architectural Systems is a UK based group which operates through a network
Folding Sliding door system
Folding Sliding door system Installation guide V1.1 Nov 2014 p2 This document is offered as guidance for WarmCore folding sliding door installations - for full survey and installation guidelines please