Weather Shield Awning and Scena Vu Wood Window Parts Reference Catalog

Transcription

1 Weather Shield Awning and Scena Vu Wood Window Parts Reference Catalog # (03/02) Weather Shield Mfg., Inc. Medford, WI /

2 Table of Contents Awning and Scena Vu Wood Window Parts Reference Catalog Guide Page 1 Awning Wood Window Exploded Views Page 2 Scena Vu Wood Window Exploded Views Page 3 Awning and Scena Vu Wood Window Horizontal/Vertical Mull Cross Sections Page 4 Awning Wood Window How To Measure To Order Replacement Parts Page 5 Scena Vu Wood Window How To Measure To Order Replacement Parts Page 7 Awning and Scena Vu Wood Window Ordering Sizes Available Page 10 Awning and Scena Vu Wood Window Glazing Options Page 12 Awning and Scena Vu Wood Window Glass Replacement Order Form Page 15 Awning and Scena Vu Wood Window Sash Replacement Order Form Page 16 Awning and Scena Vu Wood Window Screen Parts Page 17 Awning and Scena Vu Wood Window Horizontal Replacement Parts Page 19 Vertical Replacement Parts Page 25 Horizontal/Vertical Replacement Parts Page 27 Miscellaneous Replacement Parts Page 29 Hardware Parts Page 32

3 For Glass see Pages 11 & For Screen see Pages 17 & 18 9 For Hardware see Pages Please Specify Product Option Numbers or Part Numbers When Ordering. Awning and Scena Vu Wood Window Parts Reference Catalog Guide PURPOSE This catalog is intended to assist you in identifying and ordering replacement parts. Drawings in this catalog are not to scale. CATALOG FORMAT 1) Exploded View Pages (Pages 2-3) Shows part locations. PRODUCT NAME DRAWING TYPE Awning Wood Window Exploded View Each part name is shown at the bottom of the page with a reference page number to turn to for specific information on that part. TYPICAL EXPLODED VIEW 2) Measuring Your Unit Page (Pages 5-9) After the cross section pages is an informational page explaining how to measure your unit to order correct replacement part sizes. PART NAMES AND REFERENCE PAGES CATALOG PAGE AND DATE 1) Main Frame Page 4 10) Multi-Point Lock Keeper Page 17 12) Crank Handle Page 16 2) Sash Page 8 14) Bottom Hinge Page 15 3) Screen Insert Page 11 15) Top Hinge Page 15 4)Full Screen Plunger Page 11 5) Sash Glazing Bead Page 8 16) Sash Weather Strip Page 15 7) Multi-Point Lock Mounting Plate Page 17 17) Dual Insulated Glass Page 8 8) Multi-Point Lock Tie Bar Page 16 18) Vinyl Nailing Fin 1 (5/95) 3) Detailed Parts Information Pages (Pages 17-38) Pages are organized under four general categories: Horizontal, Vertical, Sash-Glass- Screens, and Miscellaneous Parts Pages. SIZE TO SPECIFY FOR ORDERING Vinyl VS Single-Hung Horzontal Parts (11.0) SPECIFY R.O. WIDTH WHEN ORDERING PARTS LISTED BELOW #1) VS SH Aluminum Drip Cap Extrusion #8610-E {S , E XX-XX-XX} COLOR WHITE TAN 1-WIDE 2-WIDE 3-WIDE 14' 8" PIECES (11.0) (11.0) (11.0) (194) SPECIFIC LENGTH IN INCHES (194.5) Drawings of the parts and their descriptions are shown at the left of the page as they will show up on your order acknowledgement. Product options and part numbers are shown at the right for you to specify when ordering. PARTS AND PART DESCRIPTIONS OPTION AND PART NUMBERS TO USE FOR ORDERING #5) VS SH 1 Inactive Meeting Rail (11.0) Extrusion #8345-V #7) VS SH Active Sash Interlock W/Fingerlift Punched (11.0) Extrusion #8216-V #11) VS SH Half Screen Support 6" (194) Extrusion #8343-V #13) VS SH Sill Cover Extrusion #8320-V-A COLOR COLOR WHITE TAN COLOR WHITE TAN COLOR WHITE TAN SIZE BY R.O. (11.0) 14 6 PIECES (194) WHITE At the end of some part descriptions are brackets with S or E followed by dates. This indicates when parts were started or ended in production. STARTING AND ENDING DATES FOR PARTS {S } (WHEN ENDING DATE IS NOT SHOWN, PART IS STILL IN USE). #14) VS SH Rigid Nailing Fin Extrusion #2329-V {S } COLOR WHITE TAN TAN WIDE 2-WIDE 3-WIDE 14' 6" PIECES SPECIFIC LENGTH (11.0) (11.0) (11.0) (194) IN INCHES (194.5) (3/95) GLASS IDENTIFICATION NUMBERS To identify when your unit was produced, look for the black ink numbers stamped on the aluminum spacer between the lites of glass. It will be near one of the four corners. See sketch at right. QUESTIONS Contact your Customer Service Representative if you INSULATING GLASS have any questions concerning how to use parts reference catalogs. ALUMINUM SPACER GLASS IDENTIFICATION NUMBERS M (03/02)

4 Drawing Not To Scale Awning Wood Window Exploded View For Screen see Pages 17 & 18 9 For Glass see Pages 11 & For Hardware see Pages ) Primed Head Brick Mould Page 19 2) Head Jamb Weather Strip Page 24 3) Leaf Weather Strip Pages 23 & 27 4) 1 Insul Wood Sash Bead Page 14 5) Primed Wood Subsill Page 19 6) Bulb Weather Strip Page 24 8) Wood Main Sill Page 19 9) Operator Cover Page 21 2 (03/02)

5 Drawing Not To Scale Scena Vu Wood Window Exploded View For Glass see Pages 11 & For Glass see Pages 11 & For Screen see Pages 17 & 18 4 For Hardware see Pages ) Primed Head Brick Mould Page 19 2) Head Jamb Weather Strip Page 24 3) Leaf Weather Strip Pages 23 & 27 4) 1 Insul Wood Sash Bead Page 14 5) Primed Wood Subsill Page 19 6) Bulb Weather Strip Page 24 7) Aluminum Horizontal Mull Page 22 8) Wood Main Sill Page 19 9) Operator Cover Page 21 10) Interior Horizontal Mull Page 20 11) Horizontal Mull T Bulb Weather Strip Page 23 3 (03/02)

6 Drawings Not To Scale Awning Wood Window Horizontal/Vertical Mull Cross Sections Brick Mould Vertical Mull Section Brick Mould Horizontal Mull Section Aluminum Clad Vertical Mull Section Aluminum Clad Horizontal Mull Section 22) Exterior Horizontal Mull Casing Page 20 23) Exterior Vertical Mull Casing Page 25 24) Stationary Sill Cover Page 22 25) Horizontal Interior Mull Lattice Page 20 26) Vertical Interior Mull Lattice Page 25 27) Slide-On Mull Cover Page 22 4 (03/02)

7 3/4 Sill-to-Head Height Glass Height Unit Height 1/2 Drawings Not To Scale *Awning Aluminum Clad Awning Wood Window How To Measure To Order Replacement Parts Sash Height Daylight Opening Height Rough Opening Height Rough Opening Width 1/2 1/2 Rough Opening Height = Glass + 5-1/4 Unit Height = Glass + 4-3/4 Sill-to-Head Height = Glass + 4 Sash Height = Glass + 2-9/16 Daylight Opening Height = Glass - 1-1/16 Screen Height = Glass + 13/16 Rough Opening Width = Glass + 5 Unit/Jamb Width = Glass + 4 Sash Width = Glass + 2-5/8 Daylight Opening Width = Glass - 1 **Screen Width = Glass + 1-7/16 Daylight Opening Width Glass Width Sash Width Unit/Jamb Width *NOTE: Vinyl TFT is sized the same. **NOTE: Before , Screen Width = Glass /16 5 (03/02)

8 Unit Height Sill-to-Head Height Drawings Not To Scale Awning Brick Mould Awning Wood Window How To Measure To Order Replacement Parts Sash Height Glass Height Daylight Opening Height Rough Opening Height Rough Opening Width Jamb-to-Jamb Width 1/2 1/2 Rough Opening Height = Glass + 5-1/4 Unit Height = Glass + 6-7/8 Sill-to-Head Height = Glass + 4 Sash Height = Glass + 2-9/16 Daylight Opening Height = Glass - 7/8 Screen Height = Glass + 13/16 Rough Opening Width = Glass + 5 Jamb-to-Jamb Width = Glass + 4 Unit Width = Glass + 7 Sash Width = Glass + 2-5/8 Daylight Opening Width = Glass - 13/16 **Screen Width = Glass + 1-7/16 Daylight Opening Width Glass Width Sash Width Unit Width **NOTE: Before , Screen Width = Glass /16 6 (03/02)

9 3/4 Sash Height Glass Height Daylight Opening Height Bottom Sash Unit Height Sash Height Glass Height Daylight Opening Height Top Sash 1/2 Drawings Not To Scale *Scena Vu Aluminum Clad Scena Vu Wood Window How To Measure To Order Replacement Parts Sill-to-Head Height Rough Opening Height Rough Opening Width 1/2 1/2 Rough Opening Height = Top & Bottom Glass + 7-7/8 Unit Height = Top & Bottom Glass + 7-3/8 Sill-to-Head Height = Top & Bottom Glass + 6-5/8 Sash Height = Glass + 2-9/16 Daylight Opening Height = Glass - 1-1/16 Screen Height = Glass + 13/16 Rough Opening Width = Glass + 5 Unit/Jamb Width = Glass + 4 Sash Width = Glass + 2-5/8 Daylight Opening Width = Glass - 1 **Screen Width = Glass + 1-7/16 Daylight Opening Width Glass Width Sash Width Unit/Jamb Width *NOTE: Vinyl TFT is sized the same. **NOTE: Before , Screen Width = Glass /16 7 (03/02)

10 Sash Height Daylight Opening Height Bottom Sash Unit Height Sill-to-Head Height Rough Opening Height Sash Height Glass Height Glass Height Daylight Opening Height Top Sash Drawings Not To Scale Scena Vu Brick Mould Scena Vu Wood Window How To Measure To Order Replacement Parts Rough Opening Width Jamb-to-Jamb Width 1/2 1/2 Daylight Opening Width Rough Opening Height = Top & Bottom Glass + 7-7/8 Unit Height = Top & Bottom Glass + 9-1/2 Sill-to-Head Height = Top & Bottom Glass + 6-5/8 Sash Height = Glass + 2-9/16 Daylight Opening Height = Glass - 7/8 Screen Height = Glass + 13/16 Rough Opening Width = Glass + 5 Jamb-to-Jamb Width = Glass + 4 Unit Width = Glass + 7 Sash Width = Glass + 2-5/8 Daylight Opening Width = Glass -13/16 **Screen Width = Glass + 1-7/16 Glass Width Sash Width Unit Width **NOTE: Before , Screen Width = Glass /16 8 (03/02)

11 3/4 Sill-to-Head Height Unit Height 1/2 Drawings Not To Scale Awning Energy Sash Energy Sash - Awning Wood Window How To Measure To Order Replacement Parts Sash Height Daylight Opening Height Rough Opening Height Rough Opening Height = Glass + 5-1/4 Unit Height = Glass + 4-3/4 Sill-to-Head Height = Glass + 4 Sash Height = Glass + 2-9/16 Daylight Opening Height = Glass - 1-1/32 Screen Height = Glass + 13/16 Rough Opening Width = Glass + 5 Unit/Jamb Width = Glass + 4 Daylight Opening Width = Glass - 1 Sash Width = Glass + 2-5/8 Screen Width = Glass + 1-7/16 Rough Opening Width 1/2 1/2 Daylight Opening Width Glass Width Sash Width Unit/Jamb Width 9 (03/02)

12 Awning Wood Window Ordering Sizes Available Size Size Size Size Size Size Size 20 x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x 36 Scena Vu Wood Window Ordering Sizes Available Size Size Size Size Size EXAMPLE: = Glass Width 58=Top Glass Height 12 = Bottom Glass Height 10 (03/02)

13 Reference Pages 13 & 14 for the Glazing Bead Options. Aluminum Clad Sash Awning and Scena Vu Wood Window Glazing Options 1 Insul 1 Triple Insul R6 & R10 1 Insul 7/8 Simulated Divided Lite 1 Insul 1-3/8 Simulated Divided Lite Reglazable Aluminum Clad Sash Reglazable Aluminum Clad Energy Sash - Awning Single Glazed 1-3/8 Simulated Divided Lite A Single Glazed 7/8 Simulated Divided Lite A Single Glazed 1-3/8 True Divided Lite A Single Glazed 7/8 True Divided Lite A 1 Insul D 3/4 Insul 7/8 Simulated Divided Lite D 3/4 Insul 1-3/8 Simulated Divided Lite D Single Glazed A 1 Insul B 1 Triple Insul R6 & R10 B 1 Insul 7/8 True Divided Lite B & C 1 Insul 1-3/8 True Divided Lite B & D 11 (03/02)

14 Reference Pages 13 & 14 for the Glazing Bead Options. Vinyl Clad Sash Awning and Scena Vu Wood Window Glazing Options Reglazable Vinyl Clad Sash 1 Insul 1 Triple Insul R6 & R10 Single Glazed A 1 Insul B 1 Triple Insul R6 & R10 B Primed/Poly Sash Single Glazed E 1 Insul D 1 Triple Insul R6 & R10 D Single Glazed 7/8 True Divided Lite E Single Glazed 1-3/8 True Divided Lite E 1 Insul 7/8 True Divided Lite D 1 Insul 1-3/8 True Divided Lite D Single Glazed 1-3/8 Simulated Divided Lite E Single Glazed 7/8 Simulated Divided Lite E 1 Insul 7/8 Simulated Divided Lite D 1 Insul 1-3/8 Simulated Divided Lite D 12 (03/02)

15 Glazing Options Reglazable Contempra Perimeter Single Glazed Glazing Bead TYPE Pine A (Shown on Pages 11 & 12) Primed Oak Cherry Maple Mahogany Inside Glazed Contempra Sash Glazing Bead TYPE Pine B (Shown on Pages 11 & 12) Primed Oak Cherry Maple Mahogany /8 TDL 1 Insul Muntin Bead TYPE Pine C (Shown on Pages 11 & 12) Primed Oak Cherry Maple Mahogany NOTE: For wood beads, specify length needed in feet (i.e. 1, 2, 3, etc.). Maximum 8 length. 13 (03/02)

16 Glazing Options #4) 1 Insul Wood Sash Bead and 1-3/8 Muntin Bead TYPE Pine D (Shown on Pages 11 & 12) Primed Oak Cherry Maple Mahogany Lite Single Glazed Wood Sash Bead and 1-3/8 Muntin Bead TYPE Pine E (Shown on Page 12) Primed Oak Cherry Maple Mahogany /8 TDL Single Glazed Muntin Bead TYPE F (Shown on Page 12) Pine Primed Oak Cherry Maple Mahogany NOTE: For wood beads, specify length needed in feet (i.e. 1, 2, 3, etc.). Maximum 8 length. 14 (03/02)

17 Glass Replacement Order Form Order Glass Only on Page (195.0) - Sash and Glass for AW on Page ( ) and SV on Page ( ) To Order Replacement Sash, Specify The Following: 1) Manufacturing Date / Glass Code (See Page 1): 2) Glass Size (See Page 10): Width: Height: 3) Glazing Option (See Pages 11-14): Single Glazed Insul Triple Insul R6 Triple Insul R10 4) Spacer Color: Mill Finish Bronze Anodized 5) Glass Type: Clear Low E Special Glass: (Obscure, Tinted, Patterned, Etc.) TDL Configuration: Wide: High: (Example: Wide: 2 High: 3) 7/8 Bar 1-3/8 Bar SDL Configuration: Wide: High: (Example: Wide: 2 High: 3) 7/8 Bar 1-3/8 Bar Grille in Airspace and Configuration: Grille Type: 5/8 Rectangular Wide: High: 5/8 Diamond Wide: High: (Example: 12-Lite) 11/16 Sculptured Rectangular Wide: High: 15/16 Sculptured Rectangular Wide: High: Color: White Adobe Desert Tan Hartford Green Cameo Gas: Argon/Krypton/SF6 (circle which one applies) NOTE: If ordering glass only, stop here (03/02)

18 Sash Replacement Order Form 6) Hinge Code: Operating Stationary 7) Hardware: Standard Seacoast 8) Exterior Type & Color: Primed No Prime/No Fingerjoint White Poly I Aluminum Clad Energy Sash Adobe Desert Tan Hartford Green Cameo Flexicolor Vinyl Clad Cameo White 9) Interior Type: Pine Primed Oak Cherry Maple Mahogany American Fir Knotty Pine Other: Poly I Color: 16 (03/02)

19 Screen Parts Screen (AW-155.7, SV-166.0) Width COLOR OPTION NUMBER Height Awning/Scena Vu Screen Width = Glass Width - 1-7/16 Screen Height = Glass Height + 13/16 White 4181 Goldtone 4211 Adobe 4182 Bright Brass 4481 NOTE: Before , Screen Width = Glass /16 Screen Corner Key 7/16 (AW-165.0, SV-179.0) COLOR White Goldtone Adobe Bright Brass Screen Tabs Gray 13/16 (AW-165.0, SV-179.0) Screen Tension Leaf Spring (AW-165.0, SV-179.0) Screen Spline (194.2) Extrusion # (03/02)

20 Screen Parts Screen Channel COLOR White Goldtone Adobe NOTE: Order in 6 increments. Bright Brass (03/02)

21 #8) Wood Main Sill w/aluminum Sill Clad Applied - Pine (Contempra Only) Awning and Scena Vu Wood Window Horizontal Replacement Parts (AW-162.0, SV-176.0) When ordering Parts below, view the unit from the exterior. Specify glass width when ordering parts. END 9-99 START #1) Primed Head Brick Mould PART 1 Wide Wide Wide Wide Wide #5) Primed Subsill PART 1 Wide Wide Wide Wide Wide Stucco Brick Mould FINISH Primed (03/02)

22 Horizontal Replacement Parts (AW-162.0, SV-176.0) #22) Primed Exterior Horizontal Mull Casing PART 1 Wide Wide Wide Wide NOTE: When ordering Parts, view the unit from the exterior. Specify glass width when ordering parts. 5 Wide Operator Cover for Lever Lock Operator #10) Scena Vu Interior Horizontal Mull TYPE Pine Primed Oak Cherry Maple Mahogany (03/02)

23 Horizontal Replacement Parts (AW-162.0, SV-176.0) #24) Stationary Sill Cover TYPE END 9-99 START 9-99 Pine Primed Oak Cherry Maple Mahogany #9) Operator Cover TYPE END 9-99 START 9-99 Pine Primed N/A Oak Cherry Maple N/A Mahogany N/A Vinyl Sill Nailing Fin Extrusion #2115 LINEAL FEET (194.2) (03/02)

24 Horizontal Replacement Parts (AW-162.0, SV-176.0) When ordering Parts, view the unit from the exterior. Specify glass width when ordering parts. Aluminum Sill Brick Mould Extrusion #1603 COLOR 176 PIECE (194.0) White Adobe Desert Tan Hartford Green NOTE: Order in 6 Increments. Cameo Aluminum Trim - Head Drip Cap Extrusion #2581 COLOR 2WIDE 3WIDE 4WIDE 5WIDE 176 PIECE (194.0) White Adobe Desert Tan Hartford Green Cameo NOTE: Order in 6 Increments. #7) Aluminum Horizontal Mull (Includes #2107 Horizontal Mull T Bulb Weather Strip on Page 23) Extrusion #3508 COLOR SCENA VU (176.0) White Adobe NOTE: Order in 6 Increments. Desert Tan Hartford Green Cameo (03/02)

25 Horizontal Replacement Parts (AW-162.0, SV-176.0) When ordering Parts, view the unit from the exterior. Specify glass width when ordering parts. Aluminum Head Brick Mould Extrusion #1600 COLOR 176 PIECE (194.0) White Adobe Desert Tan Hartford Green Cameo NOTE: Order in 6 Increments. #27) Slide On Aluminum Mull Cover Extrusion #1504 COLOR 14 8 PIECES (194.0) White Adobe Desert Tan Hartford Green NOTE: Order in 6 Increments. Cameo #3) Leaf Weather Strip Extrusion # PIECES (194.0) #11) Horizontal Mull T Bulb Weather Strip (176.0) Extrusion #2107 SCENA VU COLOR (176.0) White Beige (03/02)

26 Horizontal Replacement Parts (AW-162.0, SV-176.0) When ordering Parts, view the unit from the exterior. Specify glass width when ordering parts. #6) Bulb Weather Strip Extrusion # #2) Head Jamb Weather Strip Extrusion #2010 AWNING SCENA VU (162.0) (176.0) 12 6 PIECES (194.0) (03/02)

27 Vertical Replacement Parts (AW-163.0, SV-177.0) When ordering Parts, view the unit from the exterior. Specify glass height when ordering parts. Primed Side Brick Mould PART AWNING (163.0) SCENA VU (177.0) Left Right Stucco Brick Mould FINISH Primed #23) Primed Exterior Vertical Mull Casing AWNING SCENA VU (163.0) (177.0) Aluminum Slide On Nailing Fin Extrusion #2523 AWNING SCENA VU (163.0) (177.0) 12 6 PIECES (194.0) (03/02)

28 Aluminum Side Brick Mould Extrusion #1600 Awning and Scena Vu Wood Window Vertical Replacement Parts (AW-163.0, SV-177.0) When ordering Parts, view the unit from the exterior. Specify glass height when ordering parts. Must be ordered in 6 increments. COLOR 176 PIECE (194.0) White Adobe Desert Tan Hartford Green Cameo Slide On Aluminum Mull Cover Extrusion #1504 COLOR 14 8 PIECES (194.0) White Adobe Desert Tan Hartford Green Cameo Side Jamb Weather Strip Extrusion #2010 AWNING SCENA VU (163.0) (177.0) 12 6 PIECES (194.0) #3) Leaf Weather Strip Extrusion #2124 AWNING SCENA VU (163.0) (177.0) 12 6 PIECES (194.0) (03/02)

29 When ordering Parts, view the unit from the exterior. Order in 6 increments. 1-1/2 Aluminum TFT Mull Cover Extrusion # /2 Awning and Scena Vu Wood Window Horizontal/Vertical Replacement Parts FINISH PRECUT IN INCHES 176 PIECE (194.0) * White Adobe Desert Tan Hartford Green Cameo Aluminum TFT Mull Cover Extrusion # FINISH PRECUT IN INCHES 176 PIECE (194.0) * White Adobe Desert Tan Hartford Green Cameo /2 Aluminum TFT Mull Cover Extrusion # /2 FINISH PRECUT IN INCHES 176 PIECE (194.0) * White Adobe Desert Tan Hartford Green Cameo * When ordering White Replacement Parts, please specify manufacture date/glass code (see page 1). 27 (03/02)

30 Horizontal/Vertical Replacement Parts #25) Interior Mull Lattice TYPE Pine Primed Oak Cherry Maple Mahogany (03/02)

31 When ordering Parts, view the unit from the exterior. Order in 6 increments. Corner Gusset Awning and Scena Vu Wood Window Miscellaneous Replacement Parts (AW-165.0, SV-179.0) (AW-165.0) (SV-179.0) Wood Jamb Extension FINISH 2 2-9/16 Pine Primed Oak Cherry Maple NOTE: Other widths available. Mahogany Primed 3-1/2 Wood Flat Casing Head/Side Primed 4 Wood Flat Casing Head/Side (03/02)

32 When ordering Parts, view the unit from the exterior. Order in 6 increments. Shorty Plug {E 7-00} Awning and Scena Vu Wood Window Miscellaneous Replacement Parts (AW-165.0, SV-179.0) Grille Clips (194.0) FINISH Primed/Poly/ Energy Sash NUMBER 7CLIPS 11 CLIPS 16 CLIPS Contempra R.O. WIDTH R. O. H E I G H T Installation Clip SIZE 5-1/ / (03/02)

33 Miscellaneous Replacement Parts (AW-165.0, SV-179.0) Concealed Sash Snubber/Aligner (For Wood Sash and Energy Sash) (Order 2 per unit) Concealed Sash Snubber/Aligner (For Contempra) (03/02)

34 Awning Wood Window Hardware Parts Operator Cover ) 10 Hinge Right / 18 Hinge Right Page 34 13) 10 Hinge Left / 18 Hinge Left Page 34 14) Awning Operator Quick Release Clip Page 35 15) Crank Handle Page 38 16) Large Operator Page 35 17) Guide Bar Page 35 18) Operator Shoe Stud Page 35 19) Hinge Clip Page (03/02)

35 Scena Vu Wood Window Hardware Parts Operator Cover ) 10 Hinge Right / 18 Hinge Right Page 34 13) 10 Hinge Left / 18 Hinge Left Page 34 15) Crank Handle Page 38 20) Small Scissor Operator Page 36 21) Sash Hook for Scissor Operator Page (03/02)

36 Hardware Parts (AW-165.0, SV-179.0) #12) 10 Hinge Right #13) 10 Hinge Left #7 x 1/2 Phillips Flat Head (Track) Screw - # (each) #7 x 5/8 Phillips Flat Head Stainless Steel (Arm) Screw - # (each) 10 Right Left PART STANDARD SEACOAST Left Right Pair Large Hinge Right Left 18 PART ASSEMBLY STANDARD ASSEMBLY SEACOAST Left Right Pair NOTE: Use on Glass Heights 28 and Larger. #19) Awning Hinge Clip (165.0) (03/02)

37 Hardware Parts #16) Large Operator (28 glass and larger) (AW-165.0) 14 COLOR STANDARD SEACOAST White Bronze/Adobe Goldtone Bright Brass N/A Oil Rubbed Bronze N/A Brushed Copper Nickel N/A Brushed Chrome N/A #17) Guide Bar (AW-165.0, SV-179.0) #18) Operator Shoe Stud (Order 2 per sash) (AW-165.0, SV-179.0) #14) Awning Operator Quick Release Clip (Order 2 per operator) (AW-165.0) (03/02)

38 Hardware Parts (AW-165.0, SV-179.0) #20) Small Scissor Operator (Under 28 Glass) COLOR White Goldtone Bright Brass Bronze/Adobe Seacoast White Seacoast Goldtone Seacoast Bronze/Adobe Oil Rubbed Bronze Brushed Copper Nickel Brushed Chrome #21) Sash Hook for Scissor Operator TYPE Standard Seacoast (03/02)

39 Hardware Parts (AW-165.0, SV-179.0) Sash Lock FINISH LEFT RIGHT Left Right Goldtone Bright Brass White Bronze/Adobe Oil Rubbed Bronze Brushed Copper Nickel Brushed Chrome Sash Lock Keeper PART Standard Seacoast T Handle FINISH Goldtone Bright Brass White Bronze/Adobe Oil Rubbed Bronze Brushed Copper Nickel Brushed Chrome (03/02)

40 Hardware Parts (AW-165.0, SV-179.0) Round Handle FINISH Goldtone Bright Brass White Adobe Oil Rubbed Bronze Brushed Copper Nickel Brushed Chrome #15) Crank Handle COLOR White White Bronze (Adobe) Goldtone Bright Brass Oil Rubbed Bronze Brushed Copper Nickel Brushed Chrome Folding Crank Handle COLOR White Adobe Goldtone Bright Brass Oil Rubbed Bronze Brushed Copper Nickel Brushed Chrome (03/02)

41 Hardware Parts (AW-165.0, SV-179.0) 2 Handle Extension FINISH Goldtone Bright Brass White Adobe Oil Rubbed Bronze Brushed Copper Nickel Brushed Chrome Handle Extension FINISH Goldtone Bright Brass White Adobe Oil Rubbed Bronze Brushed Copper Nickel Brushed Chrome (03/02)