FOLDING GLASS WALL SYSTEMS

Transcription

1 FOLDING GLASS WALL SYSTEMS SERIES SI3000 A seamless wall with endless possibilities. Series SI3000 Aluminum Folding Glass Wall Systems have been a signature product of Solar Innovations since their introduction to the industry. Folding Glass Walls are also known as Bi-Fold Doors or Accordion-Style Doors and can accommodate any number of panels and configurations. Folding Glass Walls offer a flexible and customizable opening and can be incorporated into residential and commercial projects including covered patios, enclosed porches, restaurants, storefronts, retirement homes, stadiums, hotels, pool houses, and golf resorts, just to name a few applications. FEATURES OPTIONS PANELS: Top or bottom load, in-fold or out-fold operation Endless configurations possible LEED friendly system including recycled content Designed and manufactured in the U.S.A. HARDWARE: Custom manufactured operable hardware Panic hardware and closer options available Roller assemblies designed to minimize and simplify panel maintenance Zero-maintenance extruded aluminum hinges with stainless steel pins Multiple hardware styles and finishes Multiple sill designs, including ADA compliant ramps GLAZING: Designed to accommodate almost any glazing infill including panels, glass, acrylic, and polycarbonate from 3/16" to 1 1/8" FINISHES: finishes AAMA 603: Bronze, White AAMA 611 Class I Anodized: Clear, Dark Bronze Designer finishes AAMA 603: Hartford Green, Black Natural, Clay, Sandstone Custom finishes Powder coat finish: AAMA Fluoropolymer (50% or 70%): AAMA Wood veneer, metal cladding, and foiling options Dual color or dual finish options ACCESSORIES: Matching fixed transoms & sidelites Integrated options Swing doors: single or double Dutch doors: single or double Pet doors Screen options: folding, sliding, retractable Factory installed sill drain tubes, if required s, decorative muntins, simulated divided lites (Ls), interior & exterior grids Copyright 017 Solar Innovations. All Rights Reserved. 31 Roberts Road, Pine Grove, Pennsylvania or REV RS

2 FOLDING GLASS WALL SYSTEMS HARDWARE C D B B (on reverse) A A: Handles Coastal Applications Inland Applications Not available on G3 units Heavy Corrosion Resistant Finish Options Finish Options Matte Black Black White White Toronto Satin Nickel Allegro Satin Chrome Additional handle styles, colors, and back plate options available upon request. Non-standard handle options may increase lead times and/or cost. All handles available with thumb turn interior lock with lever exterior, lever interior and exterior, and thumb turn interior lock with keyed exterior options. B: Pull Hardware C: Hinges D: Locks Closer, Catch, & Limiter Recessed Pull (In-Fold) Wire Pull Hinge (Out-Fold) Semi-Concealed Hinge Two Point Locking Handle Door Closer Adjustable Door Catch Door Limiter Pull Hardware, Hinge, & Lock Finishes: Clear Anodized, Dark Bronze Anodized, White Painted, and Bronze Painted. Two Point Locking Handle guard available in black or white. Door Closer Finishes: Aluminum Painted, Bronze, Black Adjustable Door Catch & Door Limiter Finishes: Clear Anodized, Dark Bronze Anodized, White Painted, and Bronze Painted. Please Note: All hardware is subject to vendor availability. Custom finishes may be available upon request at additional lead time and/or cost. Solar Innovations reserves the right to discontinue any hardware option at any time. Please be sure to visit our website for additional product information:

3 Commercial Panic Hardware Options Passive Hardware Sets Exterior Entry Trim SQUARE Rim Panic MORTISE Concealed vertical rod available on commercial panic hardware. PULL Wire Pulls PUSH Exterior keyed lock and/or interior thumb turn lock available SQUARE Commercial TORONTO CONFIGURATIONS ALL WALL CENTER PIVOT DOUBLE DOOR SPLIT WALL SINGLE DOOR 135 NO POST 90 NO POST SEGMENTED RADIUS FJ DA = Wall Panel = Single Door = Double Door DA = Door Adapter FJ = Floating Jamb Custom configurations available upon request. FINISH OPTIONS Stock Finishes SI White SI Bronze Class I Clear Anodized Dark Bronze Anodized Designer Finishes Metal Cladding SI Black SI Sandstone SI Natural Clay SI Hartford Green Copper Lead Coated Copper 304 Stainless Steel #4 Satin Cladding 304 Stainless Steel #8 Mirror Cladding Faux Wood Finishes Acacia 1001 DS 40 Smooth Acacia 1001 Douglas Fir 1501 DS 40 Smooth Cherry 140 DS 40 Smooth Knotty Pine 103 DS 40 Smooth Cherry 140 Oak Assi 501 Dark Walnut 180 Teak 601 DS 706 Textured Mahogany Finish National Walnut 1806 DS 706 Textured Mahogany Finish Wood Veneering (Unfinished) White Oak Birch Mahogany Southern Yellow Pine Northern White Pine Red Oak Spanish Cedar Western Red Cedar Douglas Fir White Maple Please Note: Depending upon color selection, additional charges and increased lead times may apply. Color illustrations are shown as accurate as standard photography and printing processes allow. Final finish selection should be made from a physical sample; please contact Solar Innovations to receive samples. All product and finish options are subject to vendor availability. Solar Innovations reserves the right to discontinue any option at any time without notice. Additional options, including custom color match, are available; contact Solar Innovations for details.

4 G FOLDING GLASS WALLS G System G ly Enhanced Aluminum Folding Glass Wall Systems are a great way to open your environment. The system offers exceptional air, water, structural, and thermal performance in any condition. The frame uses a thermal strut system that separates the interior metal from the exterior metal. By including this thermal break, the temperature transfer between the outdoors and indoors is limited. G Non- System G Non- Aluminum Folding Glass Wall Systems are ideal for mild climates and indoor uses. This system is popular for conference rooms, interior commercial entryways, classrooms, and residential & commercial room dividers. Frames are available in two vertical stile widths: narrow and standard. These can be combined over multiple units for a unique style or kept consistent throughout. Frames are available in three vertical stile widths: narrow, standard, and heavy. You can select a consistent vertical width or mix and match the three stile widths to create a truly unique product. This flexibility allows multiple sightline and bottom rail configurations that can be retrofitted to match an existing opening or accommodate specific structural requirements. Panels Glazing Performance Minimum panel size: 18" wide; smaller panels may be available upon engineering approval Panel size up to 3' x 10'; larger panel options may be available depending on application Designed to accommodate almost any monolithic, insulated, laminated, decorative, polycarbonate, or solid panel infill from 3/16 to 1 1/4 Water performance up to 15psf, depending on sill choice and configuration Structurally tested up to a design pressure of 80psf Higher design pressure ratings available with engineering approval Test results available upon request

5 5/8" Top & Bottom Load Sill Options 1/" 1 7/8" 5/8" 1/8" 1/8" 7/3" 7/8" 7/8" 7/8" 3 1/4" 3 1/4" 3 3/8" Recessed Flush Recessed Recessed with ADA Ramps >0.09 cfm/ft >0.09 cfm/ft 7/8" >0.01 cfm/ft Water: 15.0 psf >0.01 cfm/ft Water: 15.0 psf Top Load Only Sill Options 1/4" 1" 7/16" 13/16" 14 7/8" Recessed Flush Hat Surface Mount 1" 5/16" ADA Surface Mount ADA Surface Mount Vertical & Horizontal Rail Options Options (True Divided Lites) 7/8" Please note: All mullions offered by Solar Innovations include thermal break, regardless of the system Stretch Rail 3 1/" Non- 5/8" 4 3/8" 7/16" Non- 7/16" 3 3/8" 3 3/8" 6" 5 5/8" Head Detail 6 1/8" Heavy Wide Jamb Details Regular G Jamb & Frame REGULAR JAMB - REGULAR FRAME NARROW JAMB - REGULAR FRAME REGULAR JAMB - REGULAR FRAME G Jamb & Regular G Frame JAMB - NARROW FRAME NARROW JAMBNARROW - REGULAR FRAME 6 3/8" 6 3/8" G Jamb & Frame NARROW JAMB - NARROW FRAME JAMB - REGULAR FRAME REGULAR JAMB NARROW - REGULAR FRAME NARROW JAMB - NARROW FRAME 5 7/16" 5 7/16" 4 1/" 5 1/8" Top and bottom horizontals unable to utilize framing. Options dependent upon desired size and engineering requirements. 4 1/"

6 G3 FOLDING GLASS WALLS G3 System G3 ly Enhanced Aluminum Folding Glass Wall Systems are designed for commercial and residential applications where higher design pressures are required. This system has been designed to self support at larger sizes with ease of operation. The G3 System offers exceptional air, water, structural, and thermal performance. The frame uses a thermal strut system that separates the interior metal from the exterior metal. By including this thermal break, the temperature transfer between the outdoors and indoors is limited. Frames are available in three vertical stile widths:,, and Xtra. You can select a consistent vertical width or mix and match the three stile widths to create a truly unique product. This system was created with similar sightlines to the G Systems so that the two could be used together, if desired. The flexibility of both systems allows multiple sightline and bottom rail configurations that can be retrofitted to match an existing opening or accommodate specific structural requirements. G3 Non- System G3 Non- Aluminum Folding Glass Wall Systems are ideal for any application when thermal performance is not required, including mild climates and indoor uses. This system is popular for conference rooms, interior commercial entryways, classrooms, and residential and commercial room dividers. G3 System G3 Folding Glass Wall System, also known as our Xtra System, uses a patented design to combine vertical marine glazing with horizontal stop glazing in order to create a much narrower vertical frame than conventional stop glazed doors. The System has achieved the narrowest two-sided glazed door on the market. SOLAR ORIGINAL Panels Glazing Performance Minimum panel width: 4"; smaller panels may be available based upon engineering Panel size up to 3' x 14'; larger panel options may be available depending on application Designed to accommodate almost any monolithic, insulated, laminated, decorative, polycarbonate, or solid panel infill from 1/4 to 1 1/ Water performance up to 1psf, depending on sill choice and configuration Structural tested up to a design pressure of 100psf Higher water and structural performance available with engineering approval Test results available upon request Performance does not apply to G3 System.

7 Top & Bottom Load Sill Options 5/8" 17/8" 1/" 5/8" 17/8" 7/3" 17/8" 31/" 31/" 31/" 4" 4" 4" Recessed Flush Recessed Recessed with ADA Ramps 0.09 cfm/ft 0.18 cfm/ft Water: 1.0 psf Water: Water: Top Load Only Sill Options G3 Recessed G3 Recessed 1" 13/16" 14 Surface Mount 1" 5/16" ADA Surface Mount ADA Surface Mount Vertical & Horizontal Rail Options Options Horizontals (True Divided Lites) Horizontals Verticals 4 1/4" 5/8" Xtra Stretch Rail G3 LT FGW Frame G3 LT Non- Frame Gen 3 LT Frame 3 5/16" 1 9/16" Non- 3 1/8" 3/8" 1/" 3 1/" G G3 3 Verticals G3 Heavy Non- G3 LT G3 3 Gen Terrace LT Non- Gen 3 Gen LT 3break, G3 LT G3 FGW 3 Terrace LT G3 Heavy LTFrame FGW Frame regardless ofgen the system Gen 3 Gen Regular Non- Rail Rail 3 Regular Non- Door Door 10" Please note: All mullions offered by Solar Innovations include thermal 5 Gen 3 Terrace G3 75 Door G3 HF LT Non- G3Frame Gen 3 LTG3 LT FGW G3 LT FGW GenFrame 3 Regular Non- Rail Non- Rail Frame Frame Gen 3 Regular Frame G3 Heavy Frame 5 5/8" Verticals (Vertical) 10" Bottom Rail Non- Rail 3 1/" Head Detail Horizontals G3 Sill 1/4" 7/8" Recessed Flush Hat G3 Recessed Dual Wheel FGW Sill With Ramps Dual Wheel FGW Sill 7/16" Water: 1.0psf Gen 3 Regular Frame 0.18 cfm/ft Water: 1.0 psf 0.09 cfm/ft Water: 1.0psf Flush Dual Wheel FGW Sill 31/" Xtra G3 Terrace G3 Door 75 Jamb Details G3 Jamb & Frame G3 Jamb & G3 Frame 6 3/8" 7 5/8" G3 Jamb & Frame 6 11/16" 5 7/16" Xtra G3 Jamb & Frame NARROW JAMB - XTRA NARROW VERTICAL NARROW HORIZONTAL FRAME 4 1/" 5 1/8" /16" 3 1/" 5 Top and bottom horizontals unable to utilize or Xtra framing. Options dependent upon desired size and engineering requirements.