Adams rite. Deadbolts, Deadlocks & Hookbolts Series maximum security laminated deadlocks/hookbolts

Transcription

1 1850 Series maximum security laminated deadlocks/hookbolts dams rite Deadbolts, Deadlocks & Hookbolts For single leaf doors where the gap between door and jamb is large ccepts standard mortise cylinder Steel with corrosion resistant plating Case size: 1 x 6" Hookbolt Long Throw Deadlock () Mfg # Backset Finish EZ # Long throw deadlock: 5/8 X 1-3/8 THROW MS1850S /8 lminum MS1850S /2 lminum Long throw less faceplate deadlock MS / MS / Short throw deadlock: 5/8 X 13/16 THROW MS1850S /32 lminum MS1850S /2 lminum Hookbolt: 5/8 X 13/16 THROW MS1850S /8 lminum MS1850S /2 lminum Hookbolt less faceplate: 5/8 X 13/16 THROW MS MC 31/ MS MC 1-1/ Series Dual force interconnected deadbolt/deadlatch Interconnected deadbolt and deadlatch operate with a single motion release Meets the most stringent building code egress requirements Electrified lever option for access control Re-handable Clutched exterior lever trim Passage mode lever sets available for interior doors FaceStyle adaptable faceplate system Retrofits to MS prepped doors Key controlled extension of deadbolt and latch holdback Positive latching for energy efficiency NSI/BHM Type E82101 Grade 1 Mfg # Backset Finish EZ # With Trim Set D 1-1/8 Satin Stainless With Electrified Trim Set D 1-1/8 Satin Stainless

2 THE STEEL HWK 4300 ELECTRIFIED LTCH dams rite deadlatches The easiest way to electrify an aluminum entrance door Non-handed right out of box due to it s patented two-way winged technology Interfaces with existing dams Rite handles, paddles and the new 4600 designer series handles dapts to 12, 16, 24 VDC ll steel construction with stainless steel latchbolts Retrofits to MS prep Direct replacement for 4900/4500/4700 deadlatches using the same strike Optional locked/unlocked status monitor switch ll steel construction with stainless steel latchbolts Works with existing handles, paddles and new 4600 designer series handles WHI listed, UL 1034 Exceeds NSI/BHM Grade 1 requirements Mfg # Backset EZ # / / Series Standard Duty deadlatch Cylinder backset: 7/8, 31/32, 1-1/8 or 1-1/2 by special order Case: steel with corrosion-resistant plating 1 x 5-13/16 x depth Flexibility of traffic control during and after business hours; a reverse turn of the key while bolt is held retracted retains the bolt, to allow two-way traffic for hospitals, banks, stores and other buildings which require free entrance at certain times and exit-only at other times Interchangeable, without stile modification, with any MS1850 or MS1850S deadbolt of same backset and faceplate shape (They do not, however, provide the same maximum security level as the MS deadbolt) Latch bolt: 1/2 x 1 x 1/2 throw, all metal with hardened steel internal pins Handing is reversible without special tools uxiliary bolt: ll metal, deadlocks latch bolt to prevent case-knife entry Mfg # Backset Hand EZ # /8 7/8 Left /32 Left /32 Right /8 Left /8 Right

3 dams rite Deadlatches & Paddles 4900 Series Heavy Duty Deadlatch Field Reversible Latch Bolt Flexibility of traffic control and installation is offered by the 4900 series deadlatches reverse turn of the key while bolt is held retracted retains the bolt, to allow two-way traffic for applications which require free entrance at certain times and exit-only at other times Interchangeable, without stile modification, with any MS1850 or MS1850S deadbolt of same backset and faceplate shape Retrofits to existing 4500/4700 deadlatch preparations; 1-3/4 minimum door thickness required Cylinder backset: 31/32, 1-1/8 or 1-1/2 only Latch bolt: 5/8 x 1 x 5/8 throw, solid brass; handing is easily reversible using only a screwdriver uxiliary latch pin: Stainless steel; deadlocks latch bolt to prevent case-knife entry Case: Steel with corrosion-resistant plating 7/8 x 5-13/16 Screw-fastened tube spacer brackets allow for cleaner removal when tab mounting Strikeplate: Standard strike furnished is 4902 for flat jamb where door closes flush or nearly flush Faceplate: 1 x 6-7/8, both flat and radius faceplates are supplied Flat faceplates can also be adjusted in the field for right or left hand beveled edge doors Retrofits: existing latch locks & 8400 series exit devices Mfg # Backset Finish EZ # /32 luminum /8 Duranodic /8 luminum /2 luminum dedltch PDDLES ll paddles are reversible Units for 4500/4700/4900 series latches include reversible cam disc Mfg # Finish Door Thickness EZ # Push to Left Duranodic 1-3/ luminum 1-3/ luminum 2-1/4 to 2-1/ Duranodic 1-3/ luminum 1-3/ Push to Right Duranodic 1-3/ luminum 1-3/ Ergonomic style: Push to Right Duranodic 1-3/ luminum 1-3/ Ergonomic Style: Push to Left with Monitor Switch 4591M luminum 1-3/

4 dams rite Lever Handles, paddle and lever parts, bottom rail & deadbolts options lever hndles Reversible 4580 Cam disc: Included with 4560 & 4565 handles. Required to operate 4500/4700/4900 series latches. Mfg # Hand Finish Door Thickness EZ # Operates with MS 4550R R Rev luminum 1-3/4 to Operates with Deadlatch LH Duranodic 1-3/4 to LH luminum 1-3/4 to LH luminum 2-1/4 to 2-1/ RH Duranodic 1-3/4 to RH luminum 1-3/4 to LH Duranodic 1-3/4 to LH luminum 1-3/4 to RH luminum 1-3/4 to LH luminum 1-3/4 to series pddle & 4560 series lever prts For Paddles For Paddles & Levers Mfg # Description For EZ # For Levers Binder Post Paddle Set Screw Paddle Spring Replacement Kit Paddle LH Cam Disc Lever & Paddle RH Cam Disc Lever & Paddle Spring Lever Spindle ssembly Lever Bottom Rail & Deadbolt options MS1861: Utilizes the same over center/pivot locking mechanism as the MS deadlock. For use in the bottom rail of ultra-narrow stile doors and tempered glass doors (which have no stile at all). Use the 1830 when the bottom rail is too shallow to accommodate the MS1861. MS4070: Offers the longest practical throw for a conventionally projected bolt from a narrow stile. Operates with one-half key turn of any standard mortise type cylinder or cylinder type thumbturn. NOT TO BE USED IN BOTTOM RIL. Mfg # Backset Description EZ # /32 5/8 Throw Bolt /8 5/8 Throw Bolt MS /4 13/16 Stainless Pin Bolt MS1830 MS1861 MS4070 MS /32 5/8 Throw Horizontal Bolt MS /8 5/8 Throw Horizontal Bolt

5 sliding door locks dams rite Sliding door & Keyless entry locks MS1848 Deadlock For narrow stile sliding doors Bolt: anti-lift/adjustable Faceplate: Full radiused ends Satin stainless finish 2331 Deadlock For Heavy Sliding Doors Backset: 1-3/4 only Bolt: 1/2 x 1-1/2 Strike: 1/8 x 1 x 4-11/16 with 5/8 x 1-5/8 opening Faceplate: 1 x 5-3/4 flat MS Mfg # Description Case EZ # MS Patio Lock 1/2 x 3-3/16 x 1-1/ Sliding Door Lock 7/8 x 3-5/8 x 2-11/ EFORCE KEYLESS ENTRY Keypad programmable unit has up to 150 users including master, supervisor, emergency users & 2 one time codes For 1-3/4 to 2-1/4 thick left or right hand aluminum, steel & wood doors Exterior locking trim 31/32 backsets and greater Non-handed Three modes: Standard, operating & lockout Free-wheeling lever with clutch Powered by 4 batteries mounted in front cast housing Device operation is confirmed by both a visual LED light indicator and an audible sound generated by a piezo horn Measures: 1-3/4 W x 15-3/8 H Temperature range: -35 C to +66 C Mfg # Finish EZ # For 4500, 5700, 4900 Latches & 8000 Series Exit Devices Duranodic Satin Chrome For MS Deadbolt Duranodic

6 dams rite Exit Devices & parts exit devices ctive Dummy Bar with Switch Can be wired normally open or normally closed to operate maglock, alarm, etc No latching mechanism 8211 Surface Vertical Rod For 1-3/4 thick narrow stile glass/aluminum doors with widths of 30 to 36 and heights up to 8 Requires 2 stile minimum Will accept optional rim cylinder Patented top latching mechanism interlocks door to frame djustable rods encased in contoured covers 8400 Mortise Exit Device Fits single leaf aluminum stile glass door, standard narrow stile cutout used for MS deadlock 5/8 bolt throw Minimum stile width is 2 Strike for installations where 1-3/4 door closes flush with jamb Push bars are extruded anodized aluminum with black BS end cap Handing can be reversed UL life-safety listed, NSI Grade nrrow STILE RIM EXIT DEVICE * By special order only For aluminum doors UL life-safety listed, NSI Grade Mfg # Finish Backset Hand EZ # 8099 M luminum luminum luminum 31/32" RHR luminum 1-1/8" RHR series exit device prts For 8800 Series For 8200 & 8800 Series For 8400 Series For 1-1/8 & 1-1/2 sizes, please see 4900 series Mfg # Description EZ # For 8800 Series Old Style Dogging Key New Style Dogging Key ctive End Cap For 8200 & 8800 Series Dogging ssembly For 8400 Series ctive End Cap /32 Latch /2 Thick Door Kit

7 LSD luminum-glass door hardware: Bolts, deadlatches, deadlatch lever & paddle handles Maximum Security Bolts 1820H 1850F Maximum security bolt provides for excellent security even when a gap exists between the door & frame Laminated bolt provides more strength than one piece design Replacement for existing aluminum door flip & hook bolts Case size: 7/8 x 6-13/16 Flip bolt: 5/8 x 1-3/8 throw for swinging doors Hook bolt: 5/8 x 13/16 throw for sliding doors Includes both clear & brown anodized aluminum faceplates Mfg # Bolt Backset EZ # 1820H118 Hook 1-1/ H3132 Hook 31/ F118 Flip 1-1/ F3132 Flip 31/ Deadlatches Replacement for existing aluminum door latches Case size: 7/8 x 6-13/16 Latch bolt: 5/8 x 1 x 5/8 throw Deadpin prevents the latch bolt being shimmed open Hold back function allows the latch to be dogged during store opening times Simply hold latch in and turn key backwards to dog the latch Includes both clear & brown anodized aluminum faceplates L 4510DL Mfg # Backset Hand EZ # 4510DL118LH 1-1/8 Left DL118RH 1-1/8 Right DL3132LH 31/32 Left DL3132RH 31/32 Right Deadlatch Lever Handles Works with aluminum door deadlatches such as the LSD 4510 Series Handle is designed to fit the hand and allow for minimum force to open the deadlatch Reversible cam disc included 4560L Mfg # Finish EZ # 4560L L luminum L DU Duranodic Deadlatch Paddle Handles For aluminum door latches on both outswing and inswing doors Reversible cam disc included Both Push & Pull stickers included which allows for: Push to Right, Push to Left, Pull to Right or Pull to Left 4590P L Camplug Mfg # Finish EZ # 4590P L luminum P DU Duranodic CMPLUG luminum