GAMCO CORPORATION GAMCO QUALITY FENESTRATION SYSTEMS & ARCHITECTURAL METALS. Est GAMCO CATALOG Maple Avenue, Flushing NY 11355
|
|
- Charlene Rogers
- 5 years ago
- Views:
Transcription
1
2 GAMCO CORPORATION QUALITY FENESTRATION SYSTEMS & ARCHITECTURAL METALS GAMCO CATALOG Maple Avenue, Flushing NY 11355
3 GAMCO CORPORATION QUALITY FENESTRATION SYSTEMS & ARCHITECTURAL METALS TABLE OF CONTENTS D Series Doors...DR FG Series Frames...FG Miscellaneous Section...MS CW250 Series Curtain Walls...CW HS350/I-Line Series Herculite Doors...HS W250 Series Windows...WD L Series Louvers...LV BD325 Series Balcony Doors...BD SK2000 Series Skylights...SK Architectural Metals...AM
4 D SERIES COMMERCIAL DOORS TABLE OF CONTENTS D Series Commercial Doors... DR-1 D200 Stock Doors...DR-2 D Series Door Profiles... DR-3 D Series Pictorial View... DR-4
5 D SERIES COMMERCIAL DOORS Standard D200 Narrow Stile 2 1 8" Stile & Top Rail 3 1 8" Bottom Rail Standard D350 Medium Stile 3 1 2" Stile & Top Rail 5" Bottom Rail Standard D500 Wide Stile 5" Stile & Top Rail 7 1 2" Bottom Rail D-Series Doors Framed with FG-Series Flush Glaze System FG-450 (1 3 4" x 4 1 2") Non-Thermal FG-451 (2" x 4 1 2") Non-Thermal FG-451T (2" x 4 1 2") Thermal Break Features & Options Butt Hinge / Offset Pivot Concealed Overhead Closer / Floor Closer Standard / C-Pull and Push Handle Paddle Release / Panic Device Standard MS Lock / MS Latch Lock Electric Strike / Magnetic Lock Flush-Bolts on Inactive Leaf (For Pair Door) 1 4 " or 1" Glazing Option Available Finish Clear Anodized (AL) Dark Bronze Anodized (DU) White Painted (WT) Offset Doors Opening In Left Hand (LH) Offset Doors Opening Out Special Finish Kynar Painted Powder Coating Acrylic Enamel Right Hand (RH) * Special hardware available upon request. Please consult with sales rep. Left Hand Reverse (LHR) Center Hung Doors Opening In & Out Right Hand Reverse (RHR) Single Acting Double Acting DR-1
6 D200 SERIES STOCK DOORS Single Door Pair Door Single Door with Transom Pair Door with Transom Clear Anodized (AL) / Dark Bronze Anodized (DU) Finish D200 Series Doors / FG-450 (1 3 4" x 4 1 2") Non-Thermal As Frames 4" Mill Saddle / Standard Push/Pull Handle Two Butt Hinges / Standard MS Locks / Both Sides Key Cylinders Flush-Bolts on Inactive Leaf (For Pair Door) 1 4 " Clear Tempered Glass (Optional) No Closer NOTE: * Doors Only (Without Frames) also available For Pair Doors Swing-Out Inactive Leaf Active Leaf Type Frame Size Door Opening Size Actual Door Size 1 4 " Glazing Size Single Door " x " 36" x 84" " x " " x " Pair Door " x " 72" x 84" " x " " x " Single Door w/ Transom " x 120" 36" x 84" " x " " x " Pair Door w/ Transom " x 120" 72" x 84" " x " " x " DR-2
7 D SERIES DOOR PROFILES Typical Profile Combination Type Single Door Pair Door Top Rail Bottom Rail Narrow Stile " 21 8 " 21 8 " " " Medium Stile Wide Stile " 31 2 " 31 2 " 5" 5" 5" 5" 5" " 31 2 " Other Optional Top/Bottom/Mid Rails & Glazing Options Top/Bottom Rails Mid Rails Mid Rail Adaptor 1/4" Glass Moulding 1" Glass Moulding 5 8 " 1 4 " " 1 4 " 1 2 " 3 4 " 1 2 " 3 8 " Typical Frame Combination Type Header Jamb Door Stop Saddle " " FG " " 1 2 " " 1 2 " 4" " " FG-451 2" 2" 1 2 " " 1 2 " 4" " " FG-451T 2" 2" 1 2 " " 1 2 " 4" DR-3
8 D SERIES PICTORIAL VIEW Medium Door Assembly Top Rail Tie Rod Glass Molding Stile Butt Hinge Std Push Handle Stile Std Pull Handle Glass Molding Std MS Deadbolt Lockset Butt Hinge Glass Molding Shear Block Bottom Rail Glass Molding DR-4
9 FG SERIES FRAMES TABLE OF CONTENTS FG450 Series Frame... FG-1 FG451/FG-451T Frame... FG-2 FG451 Pictorial View... FG-3 FG451 Pictorial View... FG-4 D Series & FG Series Hardware...FG-5 D Series & FG Series Hardware...FG-6
10 FG450 FRAMES 1-3/4" x 4-1/2" Frame System (FG-450) Die # Diagram Description Die # Diagram Description S Single Pocket, Open Back with Screw Spline. Mates with S-15293, S-16275, S-7108, S S Pocket Filler. Mates with S-15292, S-15293, S-15405, S-15721, S-15747, H-3084, H-3085, H S Open Back Filler with Pocket. Mates with S-15292, S-15405, S-16275, S-19576, S-25168, S-25383, S H Closed Back Sill. Mates with S-15295, S-16275, S S Sill Cap. Mates with H H Double Pocket Closed Back without Screw Spline. Mates with S-16275, S S ** Sill Shear Block. H Single Pocket Closed Back. Mates with S-16275, S S Single Pocket, Open Back without Screw Spline. Mates with S-15293, S-16275, S-7108, S S Open Back Sill. Mates with S-25169, S-15293, S S ** Header Shear Block. S Sill Cap. Mates with S-25169, S S Half Corner with One Pocket. Mates with S-18380, S-15747, S-16275, S S High Sill. Mates with S-25169, S-15293, S S Half Corner with Two Pockets. Mates with S-18380, S-15721, S-16275, S H Sill Closed Back. Mates with S-25169, S-16275, S S D-Series Door Stop. Mates with S-15292, S-15293, S-15405, S-15721, S-15747, H-3084, H-3085, H NW50370 Sub-sill. S Half Corner. Mates with S-15721, S-15747, S-15723, S S Corner. Mates with S-15293, S-15286, S S Open Back Flat Filler. Mates with S-15292, S-15405, S-25168, S-15691, S-15284, S-17758, S-25398, S *Available Finish: Clear Anodized, Dark Bronze Anodized, White Painted. **All Stock Length 24'-0" OR 19'-6"; EXCEPT Shear Block Stock Length 6'-0". Saddle Options Die # Diagram Description Die # Diagram Description S " Mill Saddle, 1 2" High. S " Mill Saddle, 1 2" High. S " Mill Handicap Saddle, 1 4" High. S " Panic Saddle with Stop, 7 16" High. *Available Finish: Mill. 24'-0" Stock Length FG-1
11 FG451 / FG451T FRAMES 2" x 4-1/2" Frame System (FG-451) Die # Diagram Description Die # Diagram Description S Single Pocket, Open Back with Screw Spline. Mates with S-15286, S-16276, S-7108, S S Single Pocket, Open Back without Screw Spline. Mates with S-15286, S-16276, S-7108, S S Open Back Filler with Pocket. Mates with S-15284, S-17758, S-16276, S-19577, S-25398, S-25377, S S ** Shear Block. S ** Sill Shear Block. S Pocket Filler. Mates with S-15284, S-15286, S-17758, S-15723, S-15724, H-3088, H-3089, H S Sill Cap. Mates with H-3088, S S ** Header Shear Block. S Half Corner with One Pocket. Mates with S-18380, S-15724, S-16276, S S High Sill. Mates with S-15301, S-15286, S S Half Corner with Two Pockets. Mates with S-18380, S-15723, S-16276, S S Open Back Sill. Mates with S-25397, S-15286, S S D-Series Door Stop. Mates with S-15284, S-15286, S-17758, S-15723, S-15724, H-3088, H-3089, H S Sill Cap. Mates with S-25398, S-25377, H H Double Pocket Closed Back with Screw Spline. Mates with S-16276, S NW " Reducer. H Single Pocket Closed Back. Mates with S-16276, S NW " Reducer. H Closed Back Sill. Mates with S-15301, S-16276, S NW " Reducer. *Available Finish: Clear Anodized, Dark Bronze Anodized, White Painted. **All Stock Length 24'-0" OR 19'-6"; EXCEPT Shear Block Stock Length 6'-0". 2" x 4-1/2" Thermal Frame System (FG-451T) S Single Pocket, Open Back with Screw Spline. Thermally Broken. Mates with S-15916, S-17509, S H05406 Closed Back Sill. Thermally Broken. Mates with S-25397, S S Open Back Filler with Pocket. Thermally Broken. Mates with S-15300, S-25377, S S25377 High Sill. Thermally Broken. Mates with S-25397, S15916, S Open Back Flat Filler. Thermally Broken. S Mates with S-15300, S S Sub-sill. Thermally Broken. *Available Finish: Clear Anodized, Dark Bronze Anodized, White Painted. **All Stock Length 24'-0"; EXCEPT Shear Block Stock Length 6'-0". FG-2
12 FG450 PICTORIAL VIEW Screw Spline Assembly S07108 S15405 S15292 #552 S15293 S15295 H03084 S25169 S25168 #2860 S15293 FG-3
13 FG450 PICTORIAL VIEW Shear Block Assembly H03085 #553 S15406 H03087 S15296 #554 S15295 H03084 S15296 #554 #2860 S25168 S25169 S15293 FG-4
14 P U S H GAMCO D SERIES & FG SERIES Hardware Part # Diagram Description Part # Diagram Description 12S12S 12" Straight Over 12" Straight C-pull H-12 Hook Lock With Face Plate ( 1 1 8" OR 1 1 2" Back Set ) 12O12O 12" Offset Over 12" Offset C-pull H-13 Dead Latch Lock With Face Plate ( 1 1 8" OR 1 1 2" Back Set ) 12S28S 12" Straight Over " Straight C-pull H-14 Walking Beam 12O28S 12" Offset Over " Staight C-pull H-15 Offset Pivot Complete Set 12S33S 12" Straight Over 33" Straight C-pull H-16 Electric Opener, Trine 12V 12O33S 12" Offset Over 33" Staight C-pull H-17 Electric Opener, AR VAC / 24VAC For Single Door H-01 Lever Handle H-18 Electric Opener, AR VAC / 24VAC For Pair Door H-02 A.R. #4565 Short Lever Handle H-19 Transformer, Plug-In 12V H-03 A.R. #4568 European Lever Handle H-20 Transformer, Plug-In 24V H-04 European Lock H-22 Surface Mounted Closer, #4 H-05 Bottom Dead Lock H-COC Overhead Conceal Closer, Complete Set H-06 Generic Paddle Release (A.R. #4590 DeadLatch Paddle) H-27 Spray Paint H-09 Cylinder Per Pair H-28 Silicone H-10 Thumb-turn H-29 Single Suction Cup H-11 Dead Bolt Lock With Face Plate ( 1 1 8" OR 1 1 2" Back Set ) H " X 4" Butt Hinge, Nrp * Specific Brand Name Hardware & Finishes Are Available Upon Request. FG-5
15 D SERIES & FG SERIES Hardware Part # Diagram Description Part # Diagram Description H-33 Select #14 Continuous Hinge, Fully Mortised 7'-0" Long H-40 Dust Proof Strike H-34 Select #14 Continuous Hinge, Fully Mortised 8'-0" Long H-41 Jig #1 For Fin Tube H-35 Roton Continuous Hinge, Surface-mount 7'-0" Long H-42 Jig #2 For Fin Tube H-36 Half Bracket H-43 Intermediate Pivot H-37 Full Bracket H-44 Flushbolt H-38 Saddle Bracket H-45 Door Hold 5" H-39 Hinge Back-up Plate H-46 Glass Cleaner, Sprayway * Specific Brand Name Hardware & Finishes Are Available Upon Request. FG-6
16 MISCELLANEOUS SECTION TABLE OF CONTENTS Rubber Gaskets and Screws... MS-1 Tubing, Angles, Channels... MS-2
17 RUBBER GASKETS & SCREWS Part # Diagram Description Part # Diagram Description 2860 Rubber For 1 4" & 1" Glazing, (FG-450 &FG-451) 500 Feet Per Roll. 554 Bracket Screw (Fin Tubing) Rubber For 3 8" Glazing, (FG-450) 500 Feet Per Roll. 555 Molding Screw (Self-Tap) Exterior Rubber (For Curtain Wall System) 500 Feet Per Roll. 556 Combo Screw (Door Hinge) Interior Rubber (For Curtain Wall System) 500 Feet Per Roll. 559 Self-Tapping Screw. 550 Pressure Bar Screw. 560 Screw (For Curtain Wall Shear Block). 552 Screw (For FG-450/FG-451 Screw Spline). 561 Screw (For Curtain Wall Shear Block). 553 Screw (For FG-450/FG-451 Shear Block). MS-1
18 TUBES - ANGLES - CHANNELS FIN TUBES - PLAIN TUBES - ANLES - CHANNELS Die # Diagram Description Die # Diagram Description H " x 4" Double Fin (0.068" Thickness). S " x 1 2" Apply Door Stop. H " x 4" Single Fin (0.068" Thickness). S Mill Door Stop Clip. S H H H H H H H " x 1 2" Molding (0.06" Thickness) " x 1 3 4" Square Tube (H-01159: 1 8" Thickness) " x 4" Plain Tube (H-04783: 0.068" Thickness; H-00593: 1 8" Thickness). 4" x 4" Square Tube (H-02508: 1 8" Thickness) " x 4 1 2" Square Tube (0.11" Thickness). S " x 1 8" Thickness Flat Bar (Mill, 6'-0"). S " x 3 4" Angle ( 1 16" Thickness). S " x 1" Angle ( 1 16" Thickness). S " x 1 1 4" Angle ( 1 16" Thickness). S " x 1 1 4" Angle ( 1 8" Thickness). H " x 3" Square Tube ( 1 8" Thickness). S " x 1 1 2" Angle ( 1 16" Thickness). H H " x 4 1 2" Plain Tube (H-03295: 1 8" Thickness). S " x 1 3 4" Angle ( 1 16" Thickness). H " x 4" Plain Tube (0.09" Thickness). S " x 2" Angle ( 1 16" Thickness). H " x 4 1 2" Plain Tube (0.094" Thickness). S " x 1" Angle ( 1 16" Thickness). H H " x 6" Plain Tube (H-03827: 0.109" Thickness). S " x 5" Angle ( 1 16" Thickness). S " x 3 4" U Channel ( 1 8" Thickness). S ' Flat Groove Facia. S " x 1" U Channel ( 1 8" Thickness). S Herculite Door - Square Shoes. S " x 1 1 4" U Channel ( 1 8" Thickness). S Herculite Door - Bevel Shoes. S " x 1 3 4" x 1" U Channel ( 1 8" Thickness). S Herculite I-Line Door Stiles. MS-2
19 CW250 SERIES CURTAIN WALLS TABLE OF CONTENTS CW250 Series Profiles...CW-1 CW250 Series Pictorial View... CW-2
20 CW250 SERIES PROFILES 2-1/2" Profile Inventory Die # Diagram Description Die # Diagram Description H H " x 5 1 2" Back Member. S Shear Block. H " x 3 7 8" Back Member. C S End Cap. H " x 2 3 8" Back Member. S F Channel ". S S " x 5 8" Snap Cover. Mates with S (S-40186). S F Anchor. S " x 5 8" Bevel Cover. Mates with S (S-40186). S T Anchor. S S " Pressure Bar. Mates with S (S-40188). C " Subsill. *Available Finish: Clear Anodized and Dark Bronze Anodized. **All Stock Length 24'-0" OR 19'-6"; EXCEPT Shear Block, Anchor Stock Length 6'-0". CW-1
21 CW250 SERIES PICTORIAL VIEW 2-1/2" Curtain Wall Assembly F-Channel Back Member T-Rubber Interior Rubber #550 Shear Block #561 #560 Back Member #560 Snap Cover #550 Pressure Bar Exterior Rubber CW-2
22 HS350/I-LINE HERCULITE DOORS TABLE OF CONTENTS HS-350/I-Line Herculite Doors...HS-1 HS-350/I-Line Profiles...HS-2 HS-350/I-Line Door Types... HS-3 HS-350/I-Line Pictorial View... HS-4
23 HS350/I-LINE HERCULITE DOORS Available Finish Clear Anodized (AL) Dark Bronze Anodized (DU) White Painted (WT) Special Finish Kynar Painted Powder Coating Acrylic Enamel Metal Cladded Stainsteel Muntz Single Door Pair Door Plain Tube System as Header 1 3 4" x 4 1 2" Plain Tube OR Pocket Tube 1 3 4" x 4" Plain Tube OR Pocket Tube Features & Options Headers with C.O.C & Bottom Pivot or Walking Beam & Floor Closer 1 2 " Clear Tempered Glass with Polished Edges Choice of I-Line Vertical Stiles 12" C-Pull and Push Handle or Full Height Ladder Handles Choice of Full Shoe or Patch Fitting on Top and Bottom 4" Mill Saddle 7" Mill Saddle or Cover Plate (Floor Closer Type) Bottom Dead Locks / Key Cylinders on Both Sides * Special Hardware Available Upon Request " I-Line Stile 3 4" HS-1
24 HS350/I-LINE PROFILES GAMCO Herculite Door Profile Inventory Die # Diagram Description Die # Diagram Description H H H " x 4" Plain Tube (H-04783: 0.068" Thickness; H-00593: 1 8" Thickness) " x 4 1 2" Plain Tube (0.094" Thickness). S " Mill Saddle, 1 2" High. S " Mill Saddle, 1 2" High. S Herculite Door - Square Shoes. S " Mill Handicap Saddle, 1 4" High. S Herculite Door - Bevel Shoes. S " Saddle with Stop, 7 16" High. S Herculite I-Line Door Stiles ( 3 4"). *Available Finish: Clear Anodized, Dark Bronze Anodized & White Painted. *All Saddle in Mill Finish. **Stock Length 24'-0" Stock Length. Single Acting Center Hung Doors - Opening Option Double Acting Standard Size Doors Type Opening Size Door Size 1 2 " Glazing Size Single Door 36" x " " x " " x " Pair Door 72" x " " x " " x " HS-2
25 HS350/I-LINE DOOR TYPES Herculite Door Door Types Full Shoe on Top & Bottom C.O.C. Header & Bottom Pivot 4" Mill Saddle Full Shoe on Top & Bottom Walking Beam & Floor Closer 7" Mill Saddle or Cover Plate Patch Fitting on Top & Full Shoe on Bottom C.O.C Header & Bottom Pivot 4" Mill Saddle Patch Fitting on Top & Full Shoe on Bottom Walking Beam & Floor Closer 7" Mill Saddle or Cover Plate Patch Fitting on Top & Bottom C.O.C Header & Bottom Pivot 4" Mill Saddle Patch Fitting on Top & Bottom Walking Beam & Floor Closer 7" Mill Saddle or Cover Plate HS-3
26 HS SERIES PICTORIAL VIEW GAMCO Herculite Door Assembly Cover Plate Corner Bracket C.O.C. Body End Load Arm Sliding Channel Shoe Cap Angle Bracket Header Top Shoe Jamb Jamb 1 2 " Tempered Glass C-Pull Handle Pivot Bearing Reatiner Pivot Stud & Bearing Saddle Clip Hex Jam Nut Saddle/Threshold Setting Block Bottom Shoe Key Cylinder Bottom Lock Saddle Clip HS-4
27 W250 SERIES SECTION TABLE OF CONTENTS W250 Series Windows... WD-1 W250 Series Pictorial View... WD-2 W250 Series Pictorial View... WD-3 W250 Series Screen...WD-4 W250 Series Screen...WD-5 W250 Series Hardware... WD-6
28 W250 SERIES WINDOWS PROJECT-IN HOPPER FIXED LITE OVER PROJECT-IN HOPPER PROJECT-OUT AWNING FIXED LITE OVER PROJECT-OUT AWING SINGLE SWING-OUT CASEMENT TWIN SWING-OUT CASEMENTS FIXED LITE FIXED LITE Available Finish Clear Anodized (AL) Dark Bronze Anodized (DU) White Painted (WT) Bronze Painted (BP) Special Finish Kynar Painted Powder Coating Acrylic Enamel Features & Options 2 1 2" Profile / Thermal Break Aluminum Equal Legs Commercial Grade: 1 16" Wall Thickness Heavy Duty Commercial Grade: 1 8" Wall Thickness Interior 1 4" or 1" Glazing Option 4-Bar Hinges / Cam Handles (Hopper, Awning, Casement) Butt Hinges / Rotary Handles / Two-Point Lock (Casement Only) Screen Optional * Note: Windows wider than 48" will receive two handles WD-1
29 W250 SERIES PICTORIAL VIEW Typical Awning Pictorial View Front View Back View Main Frame Project Out Glazing Bead Profile Section View Closed Position View WD-2
30 W250 SERIES PICTORIAL VIEW Typical Fixed Window Pictorial View Main Frame Mullion Mullion Butt Joint Main Frame Mullion Main Frame Corner Key Miter Joint with Corner Key Mullion Butt Joint WD-3
31 W250 SERIES SCREEN Screen with Wicket Screen Frame Profile Section View Wicket Available Finish Clear Anodized (AL) Dark Bronze Anodized (DU) White Painted (WT) Bronze Painted (BP) Features & Options For Awnings or Swing-Out Casements w/ Cam Handles Fiberglass Mesh / Aluminum Mesh * Note: - Windows Receiving Two Cam Handles Will Receive Two Wickets. - Swing-Out Casements w/- Rotary Handles Do Not Require Wickets. WD-4
32 W250 SERIES SCREEN Project-In Window Screen Screen Corner Key Screen Frame Profile Section View Available Finish Clear Anodized (AL) Dark Bronze Anodized (DU) White Painted (WT) Bronze Painted (BP) Features & Options For Hoppers or Swing-In Casements w/ Cam Handles Fiberglass Mesh / Aluminum Mesh *Note: - Screen can be removed from inside by releasing mounting clips. - Mesh replacement can be done with ease. WD-5
33 W250 SERIES HARDWARE Window Hardware Casement Window Hinge Four-Bar Hinge Projected In Window Handle Sizes 2.5mm x 10" 2.5mm x 12" 2.5mm x 20" 3mm x 12" 3mm x 16" 3mm x 18" Projected Out Window Handle Limit / Friction Arm Casement Rotary Crank Handle Sizes 8" / 12" / 16" Support Arm Casement Vertical Keeper Handle Sizes 8" / 12" / 16" WD-6
34 L SERIES LOUVERS TABLE OF CONTENTS L Series Louver System... LV-1 L Series Pictorial View... LV-2
35 L SERIES LOUVER SYSTEM Typical Louver Assembly L250 Series " Profile Frame L350 Series " Profile Frame Available Finish Clear Anodized (AL) Dark Bronze Anodized (DU) White Painted (WT) Bronze Painted (BP) Special Finish Kynar Painted Powder Coating Acrylic Enamel Features & Options L250 Series " Profile / Non-Thermal Break Aluminum L350 Series " Profile / Non-Thermal Break Aluminum Standard 45 Blades Bird-Screen or Insect Screen at Interior - Optional * Note: - Louvers wider than 40" will have center support mullions at the back. LV-1
36 L SERIES PICTORIAL VIEW Typical Awning over Louver Features & Options W250 Series Awning 2 1 2" Profile / Thermal Break Aluminum / Equal Legs Commercial Grade: 1 16" Wall Thickness Heavy Duty Commercial Grade: 1 8" Wall Thickness Interior 1 4" or 1" Glazing Option 4-Bar Hinges / Cam Handles L250 Series " Profile / Non-Thermal Break Aluminum Standard 45 Blades Bird-Screen or Insect Screen at Interior - Optional * Note: - Louvers wider than 40" will have center support mullions at the back. - H-Mullion is needed to join the two pieces. LV-2
37 BD325 SERIES BALCONY DOORS TABLE OF CONTENTS BD325 Series System...BD-1 BD325 Series Pictorial View... BD-2
38 BD325 SERIES BALCONY DOORS Single Door Single Door with Transom Single Door with Sidelite Available Finish Clear Anodized (AL) Dark Bronze Anodized (DU) White Painted (WT) Bronze Painted (BP) Special Finish Kynar Painted Powder Coating Acrylic Enamel Features & Options 3 1 4" Profiles / 1 8" Wall Thickness / Insul-bar Thermal Break 1" Insulated Clear Tempered Glass European Lockset Multi-Point Lock System Double Door Available Transom and Sidelite In-swing and Out-swing BD-1
39 BD325 SERIES PICTORIAL VIEW Typical Balcony Door Head Frame Details Transom Bead Jamb Door Stop Sash Sill Pair Door with Transom Operating Vent Details BD-2
40 SK2000 SERIES SKYLIGHTS TABLE OF CONTENTS SK2000-SP Pictorial View... SK-1 SK2000-HE Pictorial View... SK-2 SK2000-CP Pictorial View... SK-3 SK2000-GE Pictorial View... SK-4
41 SK2000-SP PICTORIAL VIEW Single Pitch - Curb Mount Skylight Rafter and Purlin Available Finish Clear Anodized (AL) Dark Bronze Anodized (DU) White Painted (WT) Features & Options 2" Rafter Profiles Four Sides Curb Mount 1 4 " - 1" Glazing Option Sill and Rafter Special Finish Kynar Painted Powder Coating Acrylic Enamel SK-1
42 SK2000-HE PICTORIAL VIEW Hip End - Curb Mount Skylight Ridge Hip End Rafter at Sill Hip at Sill SK-2 Purlin at Sill
43 SK2000-CP PICTORIAL VIEW Typical Hip End Copula Features Hipped End Skylight on Top 3 1 2" Rafter Profiles FG451 System as Vertical Walls 2" x 4 1 2" Profiles - Non Thermal Break 4 1 2" x 4 1 2" Corner Post L " Louver / 45 Blades Four Sides Curb Mount with Sub Sill 1" Glazing Option Hipped Rafter Rafter Purlin Adjustable Arm & Base Storefront Mullion Adjustable Arm & Base Storefront Sill & Cap Sub Sill 4 1 2" x 4 1 2" Corner Post Single Pocket Closed Back 45 Blade 3 1 4" Louver Frame SK-3
44 SK2000-GE PICTORIAL VIEW Typical Gable End Skylight Features 3 1 2" Rafter Profiles 120 Ridge Gable End with Vertical Mullion 1" Glazing Rafter Snap On Cap Pressure Bar Ridge Gable Rafter & Terminator Adjustable Arm & Base Gable Sill SK-4
45 ARCHITECTIRAL METALS TABLE OF CONTENTS Architectural Metal Section... AM-1 Architectural Pull Section...AM-2 Architectural Metal Products...AM-3 Architectural Railing Systems... AM-4
46 ARCHITECTURAL METALS GAMCO LLP-Series Ladder Style Handles Available Finish #4 Stainless Steel Finish Stock Length L = 72" / 84" / 96" / 108" Specification For use with 1 3 4" Metal / Wood Doors For use with 1 2" Tempered Glass Doors Features & Options Utilizing 16 gauge stainless steel 304 type, 1 1 4" Ø tubular pull handles back-to-back with top post pre-mounted, mid-post and bottom post loose, the smart design is engineered for fast field cut and easy on-site installation for doors of all heights. Manufactured in various standard lengths, the system not only minimizes cost and labor but also adds contemporary beauty on standard entrances while ensuring strength and durability. European Handle Lockset Stainless Steel #4 Finish FITS ON NARROW STILE DOORS! Architectural Metal Bending & Cladding Standard cladding for storefront & entrance doors, 20ga stainless steel, 304 type, #4 finish,120" stock length available. Architectural bending for copings, column covers, beam wraps, building facades, canopies in custom panels with reveals or butt joints. Architectural Perforated Grilles Architectural perforated metals are available in a wide assortment of materials and patterns. Materials include brass and stainless steel in a number of finishes. AM-1
47 ARCHITECTURAL PULL SYSTEM LLP-Series Ladder Style Handles Available Finish #4 Stainless Steel Finish " Pictorial View Stock Length L = 72" / 84" / 96" / 108" " 1" Pre-closed Ends Specification For use with 1 3 4" Metal / Wood Doors For use with 1 2" Tempered Glass Doors " Features & Options Post mounted door pulls are clean and flexible solution for all kind of doors. Utilizing 16 gauge stainless steel 304 type, 1 1 4" Ø tubular pull handles back-to-back with top post pre-mounted, mid-post and bottom post loose, the smart design is engineered for fast field cut and easy on-site installation for doors of all heights. Manufactured in various standard lengths, the system not only minimizes cost and labor but also adds contemporary beauty on standard entrances while ensuring strength and durability. Mid-Post Installation Bottom Post Installation Pre-mounted Top Post Optional Mid-Post Note: Mid-Posts are required to add extra strength to doors of over size. L Set Screw Note: Make sure the exposed set-screws are always on the interior side of the door Thread Rod (Sold Separately) Parts (Loose) 6 pcs 2 pcs 2 pcs 2 pcs Self-mounted Bottom Post Open Ends 3 pcs 8 pcs 1 pcs 3 pcs Push-On End Caps AM-2
48 ARCHITECTURAL METAL PRODUCTS European Handle Lockset Assembly Stainless Steel #4 Finish. Fits on Narrow Stile Doors. AM-3
49 ARCHITECTURAL RAILING SYSTEMS Glass Clamp Post Railing System 1 1 2" Hand Rail 2" Post 2" Radius Glass Clamp 3 8 " or 1 2" Tempered / Laminated Glass Base Cover Base Flange AM-4
CONTENTS. Custom Entrances and Hardware
CONTENTS A2/1 CONTENTS SECTION A2...CUSTOM ENTRANCES AND HARDWARE* PAGE PRICING EXAMPLES... A2/3 A2/4 190/350/500 BASE DOOR DOOR CHASSIS... A2/5 DOOR GLAZING/WEATHERING OPTIONS... A2/6 DOOR BOTTOM RAIL
More informationPUSH BAR EXIT DEVICES CROSS BAR EXIT DEVICES NARROW STILE EXIT DEVICES FEATURING LCWD STRIKES... 20
Flat Goods Section TABLE OF CONTENTS EXIT DEVICES PUSH BAR EXIT DEVICES N1500 Heavy Duty Rim Exit Device N1550 Rim Exit Device... 6 N1650 Fire Rated Heavy Duty Exit Device N1700(F) Vertical Rod Heavy Duty
More informationSECTION A4...IMPACT RATED ENTRANCES* 350 IR/500 IR ENTRANCES ENTRANCE HARDWARE OFFERINGS... A4/5
CONTENTS SECTION A4...IMPACT RATED ENTRANCES* Impact Rated Entrances CONTENTS PAGE FINISH GROUPS... A4/3 350 IR/500 IR ENTRANCES ENTRANCE HARDWARE OFFERINGS... A4/5 A4/1 350 IR/500 IR BASE DOOR DOOR CHASSIS...
More informationcustom entrances and hardware
custom entrances and hardware Table of Contents Custom Entrances (B1) Loose Hardware and Fabrication (B2) Custom Entrances and Modifications (B1) Table of Contents Entrance Door Handing page 3 CUSTOM ENTRANCES
More informationStorefront Installation Guide INSTALLATION INSTRUCTIONS
STOREFRONT General Notes 1. Check contract documents and shop drawings, and understand and clarify any Field Verify Notes, approvals of drawings, and products required to be familiar with the project.
More informationINSTALLATION INSTRUCTIONS. Thermal Entrances AA 250/AA 425 THERMAL DOOR WITH TRIFAB 601/601T FRAMING
JANUARY, 2014 1 INSTALLATION Thermal Entrances AA 250/AA 425 THERMAL DOOR WITH TRIFAB 601/601T FRAMING INSTRUCTIONS 2 FRAME ASSEMBLY JANUARY, 2014 601442 SHEAR BLOCK BALL BEARING NRP BUTT (FACTORY APPLIED
More informationSeries D200 Narrow Stile Series D300 Medium Stile * D500 Wide Stile ** Standard Aluminum Swing Entrance Doors
E F C O C O R P O R A T I O N Visit us on the web at efcocorp.com IMPACT GRADE BALLISTIC GRADE Series D200 Narrow Stile Series D300 Medium Stile * D500 Wide Stile ** Manufacturer Configurations Narrow
More information2.01 Standard Entrances Description
2.01 Standard Entrances Description Description Tubelite Standard Entrances have an outstanding reputation for craftsmanship and strength. The Narrow Stile Door has a face dimension of 2 1/8" and is designed
More information350/500 HEAVY WALL TM IR ENTRANCES 1
JUNE, 202 30/00 HEAVY WALL TM IR ENTRANCES FEATURES Blast Mitigation Product Features 30 medium stile has 3-/2" vertical stile, 3-/2" top and 6-/2" bottom rail 00 wide stile has " vertical stile, " top
More informationSTANDARD ENTRANCES TECHNICAL MANUAL
TECHNICAL MANUAL FEATURES FEATURES Narrow stile doors have a 2 1/2" top rail, 3 7/16" bottom rail, and 2 1/16" vertical stiles Medium stile doors have a 3 7/16" top rail, 6 7/16" bottom rail, and 3 7/16"
More information350/500 Heavy Wall TM IR Entrances
SEPTEMBER, 207 FEATURES Hurricane Resistant Product Blast Mitigation Product Features 50 Heavy Wall TM IR medium stile has vertical stiles, top and 6-/ (65.) bottom rails 500 Heavy Wall TM IR wide stile
More informationWOOD AND CLAD COMMERCIAL DOOR WOOD AND CLAD 2 1/4 COMMERCIAL DOOR. Table of Contents
WOOD AND CLAD COMMERCIAL DOOR WOOD AND CLAD 2 1/4 COMMERCIAL DOOR Table of Contents PAGE History... 2 Part Identification Wood Commercial Door XX RHRA... 3 Part Identification Wood Commercial Door Stationary
More informationVersatrac R-System Stock Extrusions, Clips and Accessories
Versatrac R-System Extrusions are available in 300 series (for 3 3/4" walls) and 400 series (for 4 7/8" walls). Standard finishes are Satin Metallic Bronze, Satin Black, Satin White Baked Enamel, and Clear
More informationHookbolt. Non Handed. Flat LH Bevel RH Bevel Radius Radius with Weather-strip. Radius Flat Bevel
Mortise Locks deadlatch Deadbolt Hookbolt Function: Deadbolt, Hookbolt, Deadlatch Backset: 31/32", 1-1/8", 1-1/2" Face Plate: 1"W x 6-7/8" L - Aluminum Case Dimensions: 7/8"W x 6"L x Depth specific to
More informationPRODUCT DATA CATALOG
PRODUCT DATA CATALOG CONTENTS PAGE STANDARD ELEVATIONS 2 STANDARD ELEVATIONS 3 DOOR SPECIFICATIONS 4 LOUVER SPECIFICATIONS 5 GLAZING SPECIFICATIONS 5 DOOR HANDING CHART 6 CLINE STANDARD HARDWARE LOCATIONS
More informationFINISH GROUPS #17 GRP #17 CLEAR
EFFECTIVE FEBRUARY 1, 2018 CONTENTS A3/1 CONTENTS SECTION A3...DOOR CLOSERS PAGE SURFACE MOUNTED CLOSERS... A3/2 A3/3 CALIBRE TM CLOSERS... A3/4 INTERNATIONAL CONCEALED CLOSERS... A3/5 CONCEALED CLOSER
More informationDoors & Windows. Series 700 Windows, Single Hung Tilt Standard Features. Slider Lock. Vinyl Windows. J-Rail '
Vinyl Windows Series 700 Windows, Single Hung Tilt Standard Features Constructed with white virgin PVC vinyl 2-3/8" overall frame dimension: 1" face to fin; lap pocket for vinyl siding Fusion welded frame
More information350/500 IR Entrances. Features
OCTOBER, 05 Features FEATURES Blast Mitigation Product 50 IR medium stile has vertical stiles, top and 6-/" (65.) bottom rails 500 IR wide stile has (7) vertical stile, (7) top and 6-/" (65.) bottom rail.
More information350/500 IR Entrances. Features
SEPTEMBER, 07 Features FEATURES Blast Mitigation Product 50 IR medium stile has vertical stiles, top and 6-/" (65.) bottom rails 500 IR wide stile has (7) vertical stile, (7) top and 6-/" (65.) bottom
More informationVersatrac R-System Stock Extrusions, Clips and Accessories
Versatrac R-System Extrusions are available in 300 series (for 3 3/4" walls) and 400 series (for 4 7/8" walls). Standard finishes are Satin Metallic Bronze, Satin Black, Satin White Baked Enamel, and Clear
More informationCheckmate Stops & Holders. Absolute Door Control and Entire Opening Protection
Checkmate Stops & Holders Absolute Door Control and Entire Opening Protection checkmate stops & holders TABLE OF CONTENTS General Information...3 How to Select Product...4 Options...5 Certifications...5
More information350 IR ENTRANCES INDEX
50 IR ENTRANCES INDEX Hurricane Resistant Product PICTORIAL VIEW... IR 500 ENTRANCE FRAMING DETAILS... 4 IR 50 ENTRANCE FRAMING DETAILS... 5 TRIFAB VG 450 FRAMES / 600 WALL SUB-FRAMES...6 INFILL OPTIONS
More informations tops & holder s Absolute Door Control and Entire Opening Protection
check mate s tops & holder s Absolute Door Control and Entire Opening Protection Copyright 2001-2018, ASSA ABLOY Accessories and Door Controls Group, Inc. All rights reserved. Reproduction in whole or
More informationAdams Rite. Standard & Heavy Duty Deadlatches Series Heavy Duty Deadlatch
Standard & Heavy Duty Deadlatches 4900 Series Heavy Duty Deadlatch Function: Flexibility of traffic control and installation is offered by the 4900 Series Deadlatches. A reverse turn of the key while bolt
More informationSIG Awning / Casement / Fixed Lite 100
TYPICAL FRAME ASSEMBLY - AWNING WINDOW 07-01 85720-2 GASKET EXT FL JAMB 100 BS201 (3471) HEAD HINGED 100 86064 TRIM FIN A 83963 SCREW SQ 8G X 1.0 PAN PP SS #2 85737 GASKET EXT FL TRANSOM 85720-1 86065
More informationUNIVERSITY SERIES Fixed, Projected and Casement Steel Windows
Fixed, Projected and Casement Steel Windows Hope's University Series steel window profiles were designed for projects requiring historic replication of exterior putty glazed steel windows. The fixed and
More informationNARROW, MEDIUM AND WIDE STILE, THERMASTILE AND DURASTILE. Installation Instructions
NARROW, MEDIUM AND WIDE STILE, THERMASTILE AND DURASTILE Installation Instructions PART Y015 JUNE 2016 Table of Contents Section 1. GENERAL NOTES AND GUIDELINES... 2. DOOR HARDWARE A. Locks B. Push/Pulls
More informationCLEAR GLASS WALL SYSTEMS
CLEAR GLASS WALL SYSTEMS SERIES SI3000C Clean, uninterrupted views. Series SI3000C Clear Glass Walls create a seamless wall with uninhibited views. Clear Glass Walls eliminate vertical stiles, allowing
More informationJAMESTOWN175 SERIES Fixed, Projected and Casement Steel Windows
Fixed, Projected and Casement Steel Windows Hope s Jamestown Series steel windows are manufactured from heavy custom hot-rolled steel profiles. All frames, ventilators and muntin bars are -/" in depth.
More informationV " FRP PANELS 25 PSI. POLYSTYRENE 1 8 " ⅜" TIE RODS WITH LOCKING NUTS "
6" 6" 0 ' 2' V-600 BOTTOM RAIL TOP RAIL DOOR FRAME 2 " FOR GEAR HINGE PAIR OF DOORS FOR MORTISE EXIT/FLUSH BOLTS OPTIONAL 8 " SECONDARY TIE ROD LHR ACTIVE LEAF RHR INACTIVE LEAF 8" CLOSER REINFORCEMENT
More informationPivots / Padlocks / Hasps
/ Padlocks / Hasps 046-6270 046-770 Master Lock 6270 Solid Steel Shackleless Round Padlock and 770 Security Hasp Padlock 2-7/8 round body Available cylinders: W6000 5-pin, W7000 6-pin, AM W600A 5-pin,
More information7.01. Door Hardware & Accessories
7.01 Door 7.02 Mid-Panel Concealed Vertical Rod Panic First Choice 3100 Series Exit Device 7.03 P092 Mortised Butt Hinge Both leaves of this hinge are punched and countersunk so they can be mortised into
More informationWeather Shield Awning and Scena Vu Wood Window Parts Reference Catalog
Weather Shield Awning and Scena Vu Wood Window Parts Reference Catalog #1024040 (03/02) Weather Shield Mfg., Inc. Medford, WI 54451 715/748-2100 Table of Contents Awning and Scena Vu Wood Window Parts
More informationCLEAR GLASS WALL SYSTEMS
PRODUCT DATA SHEET SERIES SI3000C CLEAR GLASS WALL SYSTEMS Clean, Uninterrupted Views Series SI3000C Clear Glass Walls eliminate vertical stiles, allowing for maximum transparency, natural daylighting,
More informationDeadlatch 451 Series. Faceplates - Deadlatch. Strikes - Deadlatch. DeadLatch for Aluminum Stile Doors. Non-Handed. 451 NC0772 1¹ 8 Backset Deadlatch 4
Mortise Locks 185 Series Mortise Locks for Aluminum Stile Doors. Non-Handed. 185 NA0019 1¹ 8 Backset Deadbolt HB185 NB0123 Faceplates - Deadbolt FP-DB-F-NH-628 NE0000 Flat FP-DB-F-NH-313 NE0001 FP-DB-B-RH-628
More informationAndersen Complementary Clad French Casement Windows (2005 to Present) What's in This Section. Clad French Casement Windows...
Andersen Complementary Clad French Casement Windows (2005 to Present) What's in This Section Clad French Casement Windows... Page 3 Part Illustrations... 3 Parts Illustration - Operating Windows... 3 Parts
More informationUniversal ARCOS EA. Patch Fittings
Universal ARCOS EA Patch Fittings Product range 4 5 DORMA Universal 6 25 ARCOS Universal 26 33 DORMA EA 34 39 Accessories 40 50 Metric/English Conversion Guide 51 3 DORMA Product Range DORMA Patch fittings
More informationFG-450 Part ID/Index 1-3/4 X 4-1/2 STOREFRONT SCREW SPLINE - NON THERMAL 1/4 GLAZING FLUSH GLAZE SYSTEM. Architectural Specification Guide STOREFRONT
FG-450 ID/Index 1-3/4 X 4-1/2 STOREFRONT 1/4 GLAZING 50001 50104 Head/Vertical Jamb 1/4 Glazing Bead 50002 50111 Adaptor Horizontal/Sill 50005 50137 Vertical Sub Sill 50013 50242 Heavy Head/Vertical Receptor
More informationMasonry Frames Interior/Exterior* Drywall Frames Interior**
Masonry Frames Interior/Exterior* Step your frame: Wire Masonry Anchor Combo Stud Anchor Existing Opening Anchor Hollow Metal 5-3/4" Standard* Frame Includes: 6 gauge - cold rolled steel - primed galvanneal
More informationDOOR SAVERS AVAILABLE IN STEEL, STAINLESS STEEL (32D), BRIGHT BRASS (3), BRONZE (10) AND OIL RUBBED BRONZE (10B)
SAVERS K1 : 9 High For cylindrical locksets 2-1/8 bore, 2-3/8 and 2-3/4 backsets K 188 2-3/8 1-3/8 K 184 2-3/8 1-3/4 K 148 2-3/4 1-3/8 K 144 2-3/4 1-3/4 K5 144 5 SPECIFY K3 : 9 High For cylindrical locksets
More informationFLUSHLINE ENTRANCES. Features
OCTOBER, 2006 FLUSHLINE ENTRANCES FEATURES 1 Features Flush appearance with a face sheet of fiberglass reinforced polyester (FRP) or aluminum, that is captured on four sides by integral extruded reglets
More informationHeavy Wall Applied Stop Tube Frame and Door Installation
INSTALLATION INSTRUCTIONS Heavy Wall Applied Stop Tube Frame and Door Installation Read all instructions before beginning installation. These instructions are provided to help prevent installation problems
More informationExit Devices 10 SERIES 1200 SERIES 20 SERIES
Exit Devices 10 SERIES 31-1085-4-7 Concealed Vertical Rod Device 340.82 340.82 31-1085P-L-7 CVR Paddle - Engraved "Push" - LHR 31-1085P-R-7 CVR Paddle - Engraved "Push" - RHR 328.55 328.55 31-1095-L-C-4
More informationBuilt to Order. Stiles. StileLine. Steel Storefront. Features. Glass. Finishing. Section Contents
Stiles Steel Door + Window Systems Steel Storefront Section Contents Tuck Glazed System SF-1.0 Flush Glazed System SF-2.0 Structural Glazed System SF-3.0 Pressure Glazed System SF-4.0 Operable Vents SF-5.0
More informationTrim & Auxiliary. Table of Contents
Trim & Auxiliary At Hager Companies, we know all about the importance of adding the finishing touches to your building projects. That s why we re proud to offer more than 200 different trim & auxiliary
More informationINSTALLATION INSTRUCTIONS Frames and Entrance Doors
INSTALLATION INSTRUCTIONS Frames and Entrance Doors J 3010 Rice Mine Road, Tuscaloosa, Alabama 35406 1-800-772-7737 Fax 1-800-443-6261 www.coralind.com A Division of Coral Industries, Inc. FRAMES and ENTRANCES
More informationStorefront Installation Guide
Storefront General Notes: 1. Check Contract Documents and Shop Drawings. Understand and clarify any Field Verify Notes and approvals of drawings and products to be familiar with the project. Installation
More informationSwing Door Installation Manual
Manual 20D/35D/50D 20DH/35DH 40M/50M 25FD 35XT 50XT 01-4000-03 2010 YKK AP America Inc. is a subsidiary of YKK Corporation of America. TABLE OF CONTENTS Installation Notes.......................................
More informationAND STOREFRONTS ARCHITECTURAL HARDWARE GLASS ENTRANCES. crlaurence.com I Worldwide Supplier MANUFACTURED BY C.R. LAURENCE COMPANY
ARCHITECTURAL HARDWARE GLASS ENTRANCES 08 42 00/CRL BuyLine 1676 AND STOREFRONTS MANUFACTURED BY C.R. LAURENCE COMPANY 'All-Glass' Entrance and Storefront Systems Panic Handle Systems Commercial Patch
More informationProduct Guide. An Introduction to Hollow Metal Terminology and CURRIES Product. ASSA ABLOY, the global leader in door opening solutions
Product Guide An Introduction to Hollow Metal Terminology and CURRIES Product in door opening solutions CURRIES CURRIES Company of Mason City, Iowa is pleased to introduce you to Basic Hollow Metal Terminology.
More informationFIRE RATED DOOR AND FRAME GENERAL REQUIREMENTS
FIRE RATED DOOR AND FRAME GENERAL REQUIREMENTS These requirements apply to all fire rated doors, frames, and windows. Requirements for the installation of these assemblies are included in the Standard
More information7500/7550 Series Casement Windows (2002 to 2010)
7500/7550 Series Casement Windows (2002 to 2010) What s in This Section Standard and Custom Windows...................................... Page 3 Parts Illustration...........................................................
More informationArchitectural Information Page: Series 514 Double-hung Window Standard Wrap Around Sash Introduction
Design Features Architectural Information Page: 22. 1 Standard Wrap Around Sash Introduction Scale: Not to scale 1. Successfully tested for compliance with Australian Standard AS 2047. 2. Optional mullion
More informationWA7000. (rev )
M-Series Push-Out Casement WA7000 Copyright 2018 Reveal Windows & Doors All rights reserved. No part of this manual may be reproduced or transmitted in any form or by any means without permission by Reveal
More informationCasement. The Bronze Craft Corporation CASEMENT HARDWARE. fax
C1 CASEMENT HARDWARE www.bronzecraft.com 800-488-7747 C2 Naval Brass, Satin Brushed 2104 Handle The handle allows for mounting on to the side of the jamb or center mullion and the offset grip ensures ample
More information40mm Thermoclick. Type II Class 1 Clear Satin Anodize - 201R1 (Mid Grade Commercial)
http://www.sundancesupply.com 40mm Thermoclick Type II Class 1 Clear Satin Anodize - 201R1 (Mid Grade Commercial) U-Profile 12' Lengths $39 Out System offers a complete set of extrusions and accessories
More informationINSTALLATION INSTRUCTIONS
INSTALLATION INSTRUCTIONS Thermally Broken Framing and Door Installation SL-450TB (2" x 4-1/2" with 1" Glazing) & SL-600TB (2" x 6" with 1" Glazing) IMPORTANT: Read all instructions before beginning installation.
More informationThermally Broken Framing and Door Installation
INSTALLATION INSTRUCTIONS Thermally Broken Framing and Door Installation IMPORTANT: Read all instructions before beginning installation. These instructions are provided to help prevent installation problems
More informationPRODUCT DATA CATALOG
PRODUCT DATA CATALOG CONTENTS PAGE STANDARD ELEVATIONS 2 STANDARD ELEVATIONS 3 DOOR SPECIFICATIONS 4 LOUVER SPECIFICATIONS 5 GLAZING SPECIFICATIONS 5 DOOR HANDING CHART 6 CLINE STANDARD HARDWARE LOCATIONS
More informationInfinity 20 Min. FIRE RATED DOORS WARNOCK HERSEY INFINITY - STANDARD RAISED - 20 MIN. RATING SOFTWOOD STILE
Infinity 20 Min Note: 20 Minute (Positive Pressure) Category A & B Manufacturing Specifications MAXIMUM SIZES All doors shall have a minimum thickness of 1-3/4" + 1/16" Single Swing: 4/0 x 9/0 Standard
More informationPrivacy Wall Glass Selections - Polished Edge Slider Door
Privacy Wall Glass Selections - Polished Edge Slider Door 3/6" HEX BIT PUTTY KNIFE #2 ACR BIT SUCTION CUP HOLDERS DOOR LEAF: Satin Tempered Clear Tempered LOCTITE 425 SIDE LIGHT ETCHED GLASS STYLES: Satin
More informationPlease read and understand all instructions before beginning. These instructions cover impact and non-impact aluminum French Door 650/750.
The performance and proper operation of a door is only as good as the installation. By following these instructions, the probability of a good installation greatly increases. Please read and understand
More informationProduct Catalog. hardwaresuppliers.com
Product Catalog hardwaresuppliers.com 800-33-5625 2 Table of Contents Full Mortise Hinges, Standard Weight... Full Mortise Hinges, Heavy Weight... 8 Half Mortise Hinges, Standard Weight... 8 Full Mortise
More informationThis section describes the design requirements and materials/products for door hardware.
Facilities Division Standards Section 08710 Door Hardware SUMMARY This section describes the design requirements and materials/products for door hardware. DESIGN REQUIREMENTS Coordinate with the McCarran
More informationTable of Contents Holders & Stops
Copyright 2003, 2007, 2009-2018, Sargent Manufacturing Company, an ASSA ABLOY Group company. All rights reserved. Table of Contents Overview.... 1 General Information.... 2 Features and Details.... 3 590
More informationMODEL: STORMMAX-MSD-FG-5100-WET
MODEL: STORMMAX-MSD-FG-5100-WET MEDIUM STILE HURRICANE RESISTANT DOORS WITH FG-5000 FRAMES MONOLITHIC LAMINATED GLASS - DRY GLAZED O.H.C.C H6333 HD6184 MID-PANEL HD6186 MEETING STILES VD6145 JAMB V6331
More informationVinyl Sliding Glass Door Assembly Instructions
Vinyl Sliding Glass Door Assembly Instructions SERIES SGD 5470/5570 Para instrucciones en español, visite: http://bit.ly/pgtassemblyinstructions Parts List ITEM 4 5 6 7 8 9 0 4 5 6 7 8 SGD 5470/5570 PARTS
More informationAndersen Complementary Clad Casement Windows (2005 to Present)
Andersen Complementary Clad Casement Windows (2005 to Present) What s in This Section Clad Casement Windows... Page 3 Part Illustrations... 3 Parts Illustration - Standard Casements... 3 Parts Illustration
More informationSteel Hawk 4300 Electrified Deadlatch (elatch)
STEEL HAWK 4300 ELECTRIFIED DEADLATCH (ELATCH) DA-1 STEEL HAWK 4300 ELECTRIFIED DEADLATCH (ELATCH) Steel Hawk 4300 Electrified Deadlatch (elatch) Operation Turn key, apply voltage, or operate handle or
More informationMODEL: STORMMAX-MSD-FG-5000-WET
MODEL: STORMMAX-MSD-FG-5000-WET MEDIUM STILE HURRICANE RESISTANT DOORS WITH FG-5000 FRAMES MONOLITHIC LAMINATED GLASS - WET GLAZED OHSC H6331 O.H.C.C H6333 MID-PANEL MEETING STILES HD6184 HD6186 VD6145
More informationFOLDING GLASS WALL SYSTEMS
FOLDING GLASS WALL SYSTEMS SERIES SI3000 A seamless wall with endless possibilities. Series SI3000 Aluminum Folding Glass Wall Systems have been a signature product of Solar Innovations since their introduction
More informationAwning and Casement Window
Awning and Casement Window Please also see: Options Full Lifetime Warranty Overview All Series Casement and Awning windows are available in both standard and custom sizes to match virtually any design,
More informationFactory Assistance: Phone: Fax: Page 1
CABLE RUNWAY ACCESSORIES Radius Drop / Stringer Drop Provides 3 bend radius Radius drop fits 6, 12 and 18 runway made from 1-1/2 x 3/8 tubing Steel construction Includes (3) cable spools, (1) bolt, (1)
More informationKEY FEATURES HARDWARE ICON BI-FOLD OPERATOR
ICON BI-FOLD OPERATOR This swivel bi-fold operator throws locking bolts into the frame at top and bottom of the panel. Optional key-locking (separately installed) is available. Having an operator handle
More informationTechnical Guide M. MMultiSlide Doors. Technical Guide M1
Technical Guide M MultiSlide Doors M Technical Guide M1 Loewen MultiSlide MultiSlide doors provide large dramatic openings for the transition from indoor and outdoor living spaces. With an easy, smooth
More informationFIRE RATED DOOR AND FRAME GENERAL REQUIREMENTS
` FIRE RATED DOOR AND FRAME GENERAL REQUIREMENTS These requirements apply to all fire rated doors, frames, and windows. Requirements for the installation of these assemblies are included in the Standard
More informationHeavy Wall Applied Stop Tube Frame and Door Installation
INSTALLATION INSTRUCTIONS Heavy Wall Applied Stop Tube Frame and Door Installation IMPORTANT: Read all instructions before beginning installation. These instructions are provided to help prevent installation
More informationOFFSET PIVOTS STOREFRONT HARDWARE
Trans-Atlantic offset pivots are used for both flush face frame installations and ⅛" recessed door applciations. Pivots replace most major door manufacturers. Suitable for aluminum doors weighing up to
More informationLegend W White B Bronze S Silver (Gray) K Black M Mill. Figure
Figure Description Part No. Additional Part Manual No. Color Code Page No. 1 Frame head N/A Not shown 2 Screen adaptor N/A Not shown 3 Frame jamb N/A Not shown 4 Frame sill N/A Not shown 5 Frame sill adaptor
More informationTable of Contents Holders & Stops
Copyright 2003, 2007, 2009-2012, Sargent Manufacturing Company, an ASSA ABLOY Group company. All rights reserved. Table of Contents Overview.... 1 General Information.... 2 How to Select Product... 3 Options,
More informationWorld s Leading Manufacturer Of Traffic Doors. Supplemental Instructions for the Single and Double Door Order Form
World s Leading Manufacturer Of Traffic Doors Supplemental Instructions for the Single and Double Door Order Form World s Leading Manufacturer Of Traffic Doors 2809 SW th Street Redmond, OR 97756 Phone:
More informationYSD 400 Sliding Door System Installation Manual
System Installation Manual 2006 YKK AP America Inc. is a subsidiary of YKK Corporation of America. TABLE OF CONTENTS Installation Notes........................................ Page ii PARTS DESCRIPTION
More informationMINIMALIST DOOR FRAMES
MINIMALIST DOOR FRAMES MINIMALIST DOOR FRAMES TIMELESSLY TRIMLESS. ENGINEERED PRODUCT SYSTEMS / DOOR FRAMES Fry Reglet's unique family of trimless door frame enhances modern design with all the functionality
More informationSECTION B INDEX STOREFRONT FRAMING SYSTEMS
SECTION B INDEX STOREFRONT FRAMING SYSTEMS B PAGE DESCRIPTION 01 STOREFRONT FRAMING SPECIFICATIONS 02 175 SERIES 1 3/4" (44.5) X 4 1/2" (114.3) FLUSH GLAZE FRAMING FOR SINGLE GLAZING. 06 200 SERIES 2"
More informationTHIS PAGE INTENTIONALLY LEFT BLANK
THIS PAGE INTENTIONALLY LEFT BLANK Seamed Edge Doors 1000 Series 16 and 18 Gauge Doors Cold Rolled or Galvanized Steel Tight Corner Seam Full Body Polystyrene Core or Honeycomb Core Non-Handed Design 12-Gauge
More informationElectrical Power Transfer Products
Manufacturing, Inc. Overhead Holders & Stops Hospital Push/Pull Latches Electro-Magnetic Door Holders Aluminum Continuous Geared Hinges Stainless Steel Continuous Pin & Barrel Hinges Stainless Steel Edge
More informationMerlin / Prima. Patch Fittings. Patch Fittings. Merlin & Prima Series
/ Prima Patch Fittings & Prima Series / Prima In the field of architectural fittings for glass doors, provides high quality and total design flexibility for ease of installation, safety, security and functionality.
More informationMortise Locks 185 Series
Mortise Locks 185 Series Mortise Locks for Aluminum Stile Doors. Non-Handed. 185 NA0019 11/8 Backset Deadbolt HB185 NB0123 Faceplates - Deadbolt FP-DB-F-NH-628 NE0000 Flat FP-DB-F-NH-313 NE0001 FP-DB-B-RH-628
More information400 Toll Free: (800) Phone: (718) Fax: (718) RIXSON Overhead Holders. Closer-Holder Packages
Checkmate and Stops General Information Overhead stops are used to protect door assemblies.they cut down the wear and tear of frequency, closing mechanisms, wind gusts, abuse and vandalism. By limiting
More informationEncore 20 Min. FIRE RATED DOORS WARNOCK HERSEY ENCORE - STANDARD PANEL - 20 MIN. RATING
Encore 20 Min 20 Minute (Positive Pressure) - Category B Manufacturing Specifications MAXIMUM SIZES All doors shall have a minimum thickness of 1-3/4" + 1/16" Single Swing: 4/0 x 8/0 Standard Pair: 8/0
More informationDB1000 SERIES. Heavy-Duty Tubular Grade 1 Deadbolts. Standard Features. Optional Features. Options
DB1000 SERIES Heavy-Duty Tubular Grade 1 Deadbolts Standard Features n Performance Complies with ANSI A156.5, Grade 1, 250,000 cycles n Chassis Tubular, steel n Deadbolt 1" x 2-1/4", square corner faceplate,
More informationAurora Door Concepts Practicality in Design
Aurora Door Concepts Practicality in Design Aurora Door Concepts This collection of commercial doors and related accessories has been designed to enhance our partition suites. The range has evolved due
More informationCOMMERCIAL STEEL AND ALUMINUM SECTIONAL DOORS
08 36 13/HAS BuyLine 0053 COMMERCIAL STEEL AND ALUMINUM SECTIONAL DOORS Meeting the most demanding specifications. see us at.com Commercial Insulated Sectional Doors Haas Door foamed-in-place polyurethane
More informationArchitectural Hardware
Architectural Hardware Surface Closers Precision Architectural Closers are designed for heavy duty commercial use. With an adjustable power tension, these closers can handle the lightest ADA Compliant
More informationMANUFACTURER & WHOLESALER OF WINLY PRODUCTS
MANUFACTURER & WHOLESALER OF WINLY PRODUCTS June 2018 ARCHITECTURAL, DESIGNER, BUILDER HARDWARE CONTENTS Finish Codes Entrance Handlesets & Lever Plate Entrance Handlesets 02 03 Multipoint Lock Gear and
More informationCable Bay Windows. Tuscany Vinyl Replacement Window. - Min Max SINGLE-HUNG
Bay picture Bay single-hung Bay casement BAY BAY BAY PICTURE - Min 4 0 1 6 Max 8 0 5 0 SINGLE-HUNG - Min 4 0 1 6 Max 8 0 5 0 CASEMENT (refer to casement/awning section for maximum vent size) - Min 4 0
More informationIllustration Part Description Base List Weight/ Ft./ Box Number Price/S.L. S.L. S.L. Qty.
Prices DO NOT include glazing gaskets or weathering. See Accessories sheet. Exterior Glazed Back Members for 1" Glass Illustration Part Description Base List Weight/ Ft./ Box Price/S.L. S.L. S.L. Qty.
More informationAdams rite. Deadbolts, Deadlocks & Hookbolts Series maximum security laminated deadlocks/hookbolts
1850 Series maximum security laminated deadlocks/hookbolts dams rite Deadbolts, Deadlocks & Hookbolts For single leaf doors where the gap between door and jamb is large ccepts standard mortise cylinder
More informationYES 45 TU Thermal Storefront System Installation Manual
Installation Manual 2004 YKK AP America Inc. is a subsidiary of YKK Corporation of America. TABLE OF CONTENTS Installation Notes........................................ Page ii PARTS DESCRIPTION Framing
More informationDIVISION 8 DOORS AND WINDOWS. 1. Exterior and interior single doors shall be 1-3/4 inch thick, 3 feet wide, and 7 feet high, minimum.
8.01 DOORS AND FRAMES (12-2-02) A. Doors DIVISION 8 DOORS AND WINDOWS 1. Exterior and interior single doors shall be 1-3/4 inch thick, 3 feet wide, and 7 feet high, minimum. 2. Where required for maintenance
More information