Masonry Frames Interior/Exterior* Drywall Frames Interior**
|
|
- Arnold Marshall
- 6 years ago
- Views:
Transcription
1
2 Masonry Frames Interior/Exterior* Step your frame: Wire Masonry Anchor Combo Stud Anchor Existing Opening Anchor Hollow Metal 5-3/4" Standard* Frame Includes: 6 gauge - cold rolled steel - primed galvanneal (rust inhibited) Specify Closer reinforcement Prepped and reinforced for 3-4-/2" square corner hinges and 4-7/8" ASA strike prep Fire rated Warnock Hersey label embossed on frame, specify Mylar label Assembled welded Handed for left or right swing (must specify - inswing or outswing) Anchors (must specify, standard 3 hinges and 6 anchors [3 each side] up to 7'6") Prepped for 3 rubber silencers Will work with block walls, poured walls, metal studs or wood studs for new construction and/or existing construction Other sizes and profiles available special order * Standard Frame Interior and exterior application 2" or 4" Face Dimension available on Header Standard Application (Interior & Exterior Applications) 4-7/8", 6-3/4" and 7-/4" Throat 5-3/4", 7-3/4" and 8-/4" Frame Depth Drywall Frames Interior** Step your frame: Hollow Metal Drywall** Frame Includes: 6 gauge - cold rolled steel - primed painted Plumb Anchor Prepped and reinforced for 3-4-/2" square corner hinges and 4-7/8" ASA strike prep Fire rated Warnock Hersey label embossed on frame, specify Mylar label Integral adjustable plumb anchor 4 tab interlocking system Knock down, ready to install Handed for left or right swing (must specify) Prepped for 3 rubber silencers 2" Face Drywall Application (Interior Applications Only) 4-7/8", 6-3/4", and 7-/4" Throat 4 tab interlocking system jamb 4 tab interlocking system header Other sizes and profiles available special order ** Drywall Frame Interior application only 5-3/4", 7-3/4" and 8-/4" Frame Depth
3 Adjustable Frames Step 8-3/4" Expandable Jamb 5/8" [6] 2" [5] /2" [3] your frame: 3 7/6" [87] ADJUSTABLE BRACKET 4 /2" TO 7 3/4" THROAT 5 /2" TO 8 3/4" JAMB DE PTH 3-/4" Expandable Jamb 7/8" [48] /2" [3] Expandable Drywall Frame Includes: 6 auge - A4 paintable galvanneal steel (Please note, ot primed, requires priming and painting) Prepped with 3-4-/2" high frequency, square corner hinge reinforcements and 4-7/8" ASA strike prep Fire-rated Warnock Hersey embossed label ubber silencer holes (3 strike jambs 2 double heads) Mechanical K corner connection All double heads undersized by /8" from nominal width on handed / eversible 7 x 2-/2" screws included (6 per jamb, 4 per head) Faces punched dimpled for wall anchoring Other sizes and profiles available special order ** Interior and exterior application 5/8" [6] 4 5/6" [25] 7/8" [48] ough Opening Corner Detail Closer Reinforcement 2" [5] /2" [3] ADJUSTABLE BRACKET 7 /2" TO 2 /4" THROAT 8 /2" TO 3 /4" JAMB DE PTH [ STUD OPENING DIMENSION = DOOR WIDTH + -/2" [38] ROUGH OPENING DIME NSION = FRAME REBATE + " [25] TO THE FINISHED FLOOR K.D. Tab FINISHED FLOOR Step 2 your door: Includes: 8 gauge - primed galvanneal einforced for closer Prepped for 3-4-/2" square corner hinges Fire-rated Warnock Hersey mylar fire labels Available with 6 cylindrical lock prep 86 edge prep (mortise) or rim panic reinforcement (exit device) available by special order equest screwed in top cap for outswing systems Inverted channel with top cap welded flush Specify ink ouvers for ouver Fire oors Flush Steel Door x 68, 70 and 80 Some sizes special order Vision Lite Flush 0 x 0 Exposed Flush Steel Door Narrow Lite 4 x 25, 6 x 30 Exposed Flush Steel Door Bottom Louver 24 X 2 24 X 24 8 X 2 2 X 2 Flush Steel Door Special order sizes available
4 Step 3 your hardware: Hang the Door Plain Bearing Hinge 4-/2" x 4-/2" MP79 26D Cannot be used with a fire rated door Ball Bearing Hinge 4-/2" x 4-/2" MPB79 26D FS# FS# FS# NRP Ball Bearing Hinge 4-/2" x 4-/2" MPB79-NRP 26D MPB9-NRP 32D 2 Secure the door with Lock, Flush Bolts, Panic Bars, etc. Key In Lever Cylindrical Lock Augusta Design 626 Satin Chrome 4600LN Series Heavy Traffic Vertical Rod Exit Device Non Rated (FS# 28552) 20F-36 - Fire Rated (FS# 28554) 630 Satin Stainless Steel Passage 460LN Both levers always active (FS# ) Privacy 4602LN Outside lever locked by inside push button. Inside lever always active. Unlocked by turning inside lever or emergency key in exterior. (FS# 28509) Storeroom 4605LN Outside lever always locked. Inside lever always active. (FS# ) Entry 4607LN Outside lever locked by inside push button. Unlocked by turning inside lever or key in exterior. Inside lever always active. If button is pushed and turned 90, outside lever will remain locked. (FS# ) Single Cylinder Deadbolt D22 Key by Thumbturn. (FS# 28534) Heavy Traffic Lever with Escutcheon Exterior Exit Device Trim (Field Reversible for LHR) AU626F RHR -- Right Hand Reverse 630 Satin Stainless Steel Compatible with all Exit Devices shown above Requires 209 x 6-Pin Cylinder (FS# 20328) Heavy Traffic Rim Exit Device Non Rated (FS# 28548) 200F-36 - Fire Rated (FS# 28550) 630 Satin Stainless Steel Standard Traffic Rim Exit Device Non Rated (FS# 28563) 800F-36 - Fire Rated (FS# 28565) 689 Aluminum Painted Rim Cylinder Use with Escutcheon Trim 209 x 6-Pin 626 Satin Chrome (FS# ) Standard Traffic Lever with Escutcheon Exterior Exit Device Trim (Field Reversible for LHR) AU426F RHR -- Right Hand Reverse 630 Satin Stainless Steel Compatible with all Exit Devices shown above Requires 209 x 6-Pin Cylinder (FS# 28587) Key In Lever Exterior Exit Device Trim AU446F - Keyed 626 Satin Chrome (FS# 2858)
5 3 Control the Door with Closers - Grade Heavy Traffic Door Closer Cast Iron Non-Hold Open (FS# ) 58 - Hold Open (FS# 28523) 689 Aluminum Painted Parallel Arm Mount Top Jamb Arm Mount Heavy Traffic Door Closer Non-Hold Open (FS# 2859) 27 - Hold Open Includes Cover (FS# 28592) 689 Aluminum Painted Regular Arm Mount Closer includes hardware pack for regular arm, top jamb mounting, and parallel arm installation. 4 Protect the Door with Push & Pull Plates, Kickplates, etc. Push Plate 4" x 6" 70C 32D (FS# ) Pull Plate 4" x 6" 06 x 70C 32D (FS# ) Steel Door Flush Bolt 555 US26D (FS# ) Kick Plate 0" x 34" K050 32D (FS# ) Dome Floor Stop 44 US26D (FS# ) Concave Wall Bumper 409 US32D (FS# ) Door Viewer 620 Chrome 60 /2" hole (FS# ) Kick Down Door Holder 46 26D (FS# ) 5 Seal the Door with Weatherstrip, Sweep and Threshold Weatherstrip/Smoke Seal Adhesive Back S88D FS# FS# Weatherstrip Perimeter Gasket 303AS Door Sweep Door Bottom 35CN 27AV FS# FS# Threshold ADA Compliant /4" x 5" x 3 ft. & 6 ft. 27A /4" x 7" x 3 ft. & 6 ft. 276A
6 Step 4 Order your door Door Handings (viewed from Keyed Side of Door) Inswing Left Hand Right Hand Left Hand Active Right Hand Active Outswing Left Hand Reverse Right Hand Reverse Left Hand Reverse Active Right Hand Reverse Active Opening Sizes for Steel Frames Masonry Frame Door Size Head Frame Face Dimension Rough Opening Unit Dimension Width Height Width Height 3/0 x 6/8 2" 40-/4" 82-/8" 40" 82" 3/0 x 7/0 2" 40-/4" 86-/8" 40" 86" 3/0 x 7/0 4" 40-/4" 88-/8" 40" 88" Butted Application Drywall Frame Door Size Rough Opening Width Height 2/8 x 6/8 34" 8" 3/0 x 6/8 38" 8" 3/0 x 7/0 38" 85" 6/0 x 6/8 74" 8" 6/0 x 7/0 74" 85" Slip-On Drywall Application ROUGH OPENING DRYWALL INSTALLATION Expandable Drywall Frame Door Size Rough Opening Width Height 2/8 x 6/8 33-/2" 8" 3/0 x 6/8 37-/2 " 8" 3/0 x 7/0 37-/2" 85" 6/0 x 6/8 73-/2" 8" 6/0 x 7/0 73-/2" 85" STUD OPENING DIMENSION = DOOR WIDTH + -/2" [38] FINISHED FLOOR ROUGH OPENING DIME NSION = FRAME REBATE + " [25] TO THE FINISHED FLOOR Expandable Drywall Application
7 Step 5 Fill out your checklist The following checklist will be useful in gathering complete quoting/ordering information Customer Name: Application: q Interior q Exterior Job Name: Frames: Rough Opening Size: Nominal Opening size (ie3070) Wall Type: q Concrete Block (new) q Precast Concrete q Metal Stud q Wood Stud q Other Finished Wall Thickness: Frame Depth Frame Type: q Masonry q Drywall q Adjustable q Custom (drawing attached) Corner Construction: q Knockdown q Set-up & Welded Anchor: q Wire Masonry q Combination Stud q 2pc Adjustable (Drywall) q Existing Opening with Expansion Bolt Gauge: q 6 q 4 q Other Fire Rating: q B label (-/2 hour) q C label (45 minute) q (20 minute) q (non-rated) Opening: q Single Door q Pair Of Doors (Punched and Dimpled) Steel: q Cold Rolled Steel q Galvanneal Handings: q Single q LH Inswing q RH q LHR Outswing q RHR q Double q LHA Inswing q RHA q LHRA Outswing q RHRA Doors: Type: q Flush Honeycomb q Flush Polystyrene Core q Embossed 6-Panel Polystyrene Core q Wood (specify) Design: q Flush q 6-Panel q Vision Lite (refer back to step 2 for sizes) q Bottom Louver (refer back to step 2 for sizes) Gauge: q 20 q 8 q 6 Fire Label: q B label (-/2 hour) q C label (45 minute) q (20 minute) q (non-rated) Opening: q Single Door q Pair Of Doors Astragal: q with Astragal q without Astragal Handing: q Inswing q Outswing Steel: q Cold Rolled q Galvanneal Hardware: (Lever Lock) (Deadbolt) (Mortise Lock) Lock Lock Type q Cylindrical q Deadbolt q Mortise Lock Function Part Number Finish Hinges: q Plain Bearing q Plain NRP q Ball Bearing q Ball Bearing NRP q Spring Finish Door Closer: q Heavy Duty q Standard Duty Finish Exit Device: q Rim Device q Mortise Device q Mortise Device Trim q Surface Vertical Rod Finish Misc. Hardware: q Threshold q Weatherstrip q Surface Bolts/Flush Bolts (pair) Finish q Push Plate Size q Pull Plate Size Finish q Kickplate Size q Finish
8
Solid Core Wood Door / Steel Frame Packages
Solid Core Wood Door / Steel Frame Packages No Label - Interior Packages Machined for one (1) cylindrical lock and three (3) hinges at Republic locations 1-3/4 Solid Core Birch 1-3/4 Solid Core Oak 3/0
More informationCOMMERCIAL DOORS, FRAMES AND HARDWARE
COMMERCIAL DOORS, FRAMES AND HARDWARE WWW.HORNERCS.COM HORNER COMMERCIAL SALES QUOTING/ORDERING STEPS HORNER COMMERCIAL SALES specializes in supplying architectural building products for all types of commercial
More informationWorld s Leading Manufacturer Of Traffic Doors. Supplemental Instructions for the Single and Double Door Order Form
World s Leading Manufacturer Of Traffic Doors Supplemental Instructions for the Single and Double Door Order Form World s Leading Manufacturer Of Traffic Doors 2809 SW th Street Redmond, OR 97756 Phone:
More informationTECHNICAL DATA SHEET STANDARD STEEL FRAMES SPECIFICATIONS MESKER STANDARD STEEL FRAMES
DS-201-1 STANDARD STEEL FRAMES SPECIFICATIONS STANDARD STEEL FRAMES 1. Frames shall be manufactured by Mesker Door Incorporated and designated as F-416 (16 GA) or F-414 (14 GA) for 1 3/4 doors, F-412 for
More informationPUSH BAR EXIT DEVICES CROSS BAR EXIT DEVICES NARROW STILE EXIT DEVICES FEATURING LCWD STRIKES... 20
Flat Goods Section TABLE OF CONTENTS EXIT DEVICES PUSH BAR EXIT DEVICES N1500 Heavy Duty Rim Exit Device N1550 Rim Exit Device... 6 N1650 Fire Rated Heavy Duty Exit Device N1700(F) Vertical Rod Heavy Duty
More informationTable of Contents F Series Frames
Table of Contents F Series Frames How to Order Frames... F 1 F Series Spec Sheet... F 2 F Series Profiles 1 of 6... F 3 F Series Profiles 2 of 6... F 4 F Series Profiles 3 of 6... F 5 F Series Profiles
More informationSeamed Edge Doors 1000 Series
Seamed Edge Doors 1000 Series 16 and 18 Gauge Doors Cold Rolled or Galvanized Steel Tight Corner Seam Full Body Polystyrene Core or Honeycomb Core Non-Handed Design 12-Gauge Closer Reinforcement Reversible
More informationPAGE 27. Performance Performance Hinge. Screws Warranty. Pin Finishes Note Gauge
Performance Performance Hinge Screws Warranty Pin Finishes Note Gauge Complies with ANSI A156.1, 1999 (plain bearing and ball bearing) Complies with ANSI A156.17, 1999, UL listed (spring hinge) 4-1/2"
More informationFIRE RATED DOOR AND FRAME GENERAL REQUIREMENTS
FIRE RATED DOOR AND FRAME GENERAL REQUIREMENTS These requirements apply to all fire rated doors, frames, and windows. Requirements for the installation of these assemblies are included in the Standard
More informationProduct Guide. An Introduction to Hollow Metal Terminology and CURRIES Product. ASSA ABLOY, the global leader in door opening solutions
Product Guide An Introduction to Hollow Metal Terminology and CURRIES Product in door opening solutions CURRIES CURRIES Company of Mason City, Iowa is pleased to introduce you to Basic Hollow Metal Terminology.
More informationProduct Catalog. hardwaresuppliers.com
Product Catalog hardwaresuppliers.com 800-33-5625 2 Table of Contents Full Mortise Hinges, Standard Weight... Full Mortise Hinges, Heavy Weight... 8 Half Mortise Hinges, Standard Weight... 8 Full Mortise
More informationPre-Hanging Information
Pre-Hanging Information Difference between Door Slab and Pre-hung Door Door Slab Only Door Slab Only No handle preparation. No deadbolt preparation. No frame or hinges included. Pre-hung door Door unit
More informationPre-Hung Entry Door Systems
Pre-Hung Entry Door Systems AC101_Achiever_Residential_10.13_Layout 1 10/23/13 4:10 PM Page 2 For over Fifty Years DUNBARTON Door and Entry Systems has been an innovative influence in the industry by pushing
More informationDOOR SAVERS AVAILABLE IN STEEL, STAINLESS STEEL (32D), BRIGHT BRASS (3), BRONZE (10) AND OIL RUBBED BRONZE (10B)
SAVERS K1 : 9 High For cylindrical locksets 2-1/8 bore, 2-3/8 and 2-3/4 backsets K 188 2-3/8 1-3/8 K 184 2-3/8 1-3/4 K 148 2-3/4 1-3/8 K 144 2-3/4 1-3/4 K5 144 5 SPECIFY K3 : 9 High For cylindrical locksets
More informationFIRE RATED DOOR AND FRAME GENERAL REQUIREMENTS
` FIRE RATED DOOR AND FRAME GENERAL REQUIREMENTS These requirements apply to all fire rated doors, frames, and windows. Requirements for the installation of these assemblies are included in the Standard
More informationHookbolt. Non Handed. Flat LH Bevel RH Bevel Radius Radius with Weather-strip. Radius Flat Bevel
Mortise Locks deadlatch Deadbolt Hookbolt Function: Deadbolt, Hookbolt, Deadlatch Backset: 31/32", 1-1/8", 1-1/2" Face Plate: 1"W x 6-7/8" L - Aluminum Case Dimensions: 7/8"W x 6"L x Depth specific to
More informationVictory Fire Door Inspections
Vickie Evans, FDAI Over 30 years in door and hardware industry DHI instructor and Education Advocate Certified Fire Door Inspector To compartmentalize a building Deter the spread of smoke and flames Fire
More information1800 Series. Flatbar Exit Devices. An ASSA ABLOY Group brand
, BC V3L 3B1, BC V3A 8A7, BC V3B 7W3, BC V6G 2M6 1800 Series Flatbar Exit Devices An ASSA ABLOY Group brand , BC V3L 3B1, BC V3A 8A7, BC V3B 7W3, BC V6G 2M6 introduction Yale 1800 series exit devices are
More informationDCI Hollow Metal Technical Data
DCI Hollow Metal Technical Data DCI HOLLOW METAL 7980 Redwood Ave Fontana, CA 92336 Phone (909) 770-5700 Toll Free (866) 989-3667 Fax (909) 770-5722 www.dcihollowmetal.com INDEX FRAMES: PAGE # ANCHORS:
More informationThis section describes the design requirements and materials/products for door hardware.
Facilities Division Standards Section 08710 Door Hardware SUMMARY This section describes the design requirements and materials/products for door hardware. DESIGN REQUIREMENTS Coordinate with the McCarran
More informationSubject: Specification Compliance
Subject: 08 11 13 Specification Compliance CURRIES product quality and performance is equal to or exceeds the manufacturers listed in most 08 11 13 Specification. 16 gauge top and bottom caps must be specified
More informationYour global resource for quality commercial door hardware. Euroline Catalog Euroline Catalog
Your global resource for quality commercial door hardware. Catalog Catalog More for your door than any other brand. TM Industry-Leading Service For more than 158 years, Hager Companies has led the industry
More informationDOOR COMPONENTS, INC Technical Data
DOOR COMPONENTS, INC Technical Data DOOR COMPONENTS, INC 7980 Redwood Ave Fontana, CA 92336 Phone (909) 770 5700 Toll Free (866) 989 3667 Fax (909) 770 5722 www.doorcomponents.com INDEX FRAMES: PAGE #
More informationMcKINNEY Hinge Catalog Half Mortise Plain Bearing Hinges Five Knuckle Standard Weight Series (Reversible)
Half Mortise Plain Bearing Hinges Five Knuckle Standard Weight Series (Reversible) T2774 or furnished in : on hinge side specify T4774) 4 1 2 114.3.134 All 5K plain bearing standard weight half mortise
More informationINSTALLATION INSTRUCTIONS. Thermal Entrances AA 250/AA 425 THERMAL DOOR WITH TRIFAB 601/601T FRAMING
JANUARY, 2014 1 INSTALLATION Thermal Entrances AA 250/AA 425 THERMAL DOOR WITH TRIFAB 601/601T FRAMING INSTRUCTIONS 2 FRAME ASSEMBLY JANUARY, 2014 601442 SHEAR BLOCK BALL BEARING NRP BUTT (FACTORY APPLIED
More informationArchitectural Hardware
Architectural Hardware Surface Closers Precision Architectural Closers are designed for heavy duty commercial use. With an adjustable power tension, these closers can handle the lightest ADA Compliant
More informationFEATURES. TownSteel Architectural Hardware MFG
TownSteel Architectural Hardware MFG TownSteel Inc. Quick Ship Guide Quick Ship Products on the road to you within 48 hours of receipt of purchase order and upon approval of credit. Terms and conditions
More informationAdams rite. Deadbolts, Deadlocks & Hookbolts Series maximum security laminated deadlocks/hookbolts
1850 Series maximum security laminated deadlocks/hookbolts dams rite Deadbolts, Deadlocks & Hookbolts For single leaf doors where the gap between door and jamb is large ccepts standard mortise cylinder
More informationPush Plates. Published list prices. Please login or contact a sales representative for your pricing.
1001 Push Plates 605 613 628 630 1001-1 Push Plate 3 12 10.00 1001-11 Push Plate 8 16 63.00 63.00 42.00 1001-2 Push Plate 3½ 15 24.00 27.00 12.00 1001-3 Push Plate 4 16 27.00 32.00 11.00 13.00 1001-9 Push
More informationLIST PRICING. Standard Door Modifications
Standard Modifications 6/8 Slab Only (No Jamb) *deduct from standard door unit price - $120 7/0 and 8/0 Slab Only (No Jamb) *deduct from standard door unit price -$160 Sidelite Panel Only (No Jamb) *deduct
More information.1 Comply with the General Conditions of the Contract, Supplementary General Conditions and the requirements of Division 1.
PAGE 1 PART 1 GENERAL 1.1 REFERENCE.1 Comply with the General Conditions of the Contract, Supplementary General Conditions and the requirements of Division 1. 1.2 RELATED WORK SPECIFIED ELSEWHERE.1 Installation
More informationSteel Hawk 4300 Electrified Deadlatch (elatch)
STEEL HAWK 4300 ELECTRIFIED DEADLATCH (ELATCH) DA-1 STEEL HAWK 4300 ELECTRIFIED DEADLATCH (ELATCH) Steel Hawk 4300 Electrified Deadlatch (elatch) Operation Turn key, apply voltage, or operate handle or
More informationTHIS PAGE INTENTIONALLY LEFT BLANK
THIS PAGE INTENTIONALLY LEFT BLANK Seamed Edge Doors 1000 Series 16 and 18 Gauge Doors Cold Rolled or Galvanized Steel Tight Corner Seam Full Body Polystyrene Core or Honeycomb Core Non-Handed Design 12-Gauge
More informationInfinity 20 Min. FIRE RATED DOORS WARNOCK HERSEY INFINITY - STANDARD RAISED - 20 MIN. RATING SOFTWOOD STILE
Infinity 20 Min Note: 20 Minute (Positive Pressure) Category A & B Manufacturing Specifications MAXIMUM SIZES All doors shall have a minimum thickness of 1-3/4" + 1/16" Single Swing: 4/0 x 9/0 Standard
More informationAn ASSA ABLOY Group brand Series. Flatbar Exit Devices
An ASSA ABLOY Group brand 1800 Series Flatbar Exit Devices Page revised electronically 7/16 1800 series grade 1 exit devices introduction Yale 1800 series exit devices are the ideal choice for economy
More informationFull line catalog. Locks, closers, and exits
Full line catalog Locks, closers, and exits Contents Cylindrical locks and deadbolts C1000 Series 4 C2000 Series 6 DB1000 Series 9 DB2000 Series 10 Surface door closers DCH1000 Series 12 DCM1000 Series
More information3000 Series Exit Devices Premier Product
00 000 Series Exit Devices Premier Product Certification & Compliance: ANSI/BHMA A56., Grade ANSI A7. Accessibility Code Underwriters Laboratories (UL and CUL) listed for accident hazard (panic) standard.
More informationSECTION BULLET- RESISTANT DOORS
1 SECTION 08 3950 BULLET- RESISTANT DOORS PART 1- GENERAL 1.01 SUMMARY A. This Section Includes: 1. Bullet- resistant steel door and frame systems. 2. Door hardware for bullet- resistant steel door and
More informationExit Device 5820 SERIES GRADE 1 PUSH BAR SPECIFICATIONS HEAD COVER OPTIONS STRIKES APPLICATION.
Exit Device 5820 SERIES GRADE 1 PUSH BAR 5820F Fire-Rated Mortise Lock Exit Device 5820FSF Failsafe Electric Mortise Exit Device 5820FS Failsecure Electric Mortise Exit Device HEAD COVER OPTIONS HC-1 HC-2
More informationEncore 20 Min. FIRE RATED DOORS WARNOCK HERSEY ENCORE - STANDARD PANEL - 20 MIN. RATING
Encore 20 Min 20 Minute (Positive Pressure) - Category B Manufacturing Specifications MAXIMUM SIZES All doors shall have a minimum thickness of 1-3/4" + 1/16" Single Swing: 4/0 x 8/0 Standard Pair: 8/0
More informationB. Shop Drawings: Include elevations, door edge details, frame profiles, metal thicknesses, preparations for hardware, and other details.
SECTION 081113 - HOLLOW METAL DOORS AND FRAMES PART 1 - GENERAL 1.1 SUMMARY A. Section Includes: 1. Standard hollow metal doors and frames. 1.2 SUBMITTALS A. Product Data: For each type of product indicated.
More informationMH Series Mitered Frames shall be as manufactured or furnished by Republic Doors and Frames, McKenzie, Tennessee
drywall frames - mh series/mitered SHEET NO. 202 MH Series Mitered Frames shall be as manufactured or furnished by Republic Doors and Frames, McKenzie, Tennessee 38201. Profile - Made for two basic door
More informationMANUFACTURER & WHOLESALER OF WINLY PRODUCTS
MANUFACTURER & WHOLESALER OF WINLY PRODUCTS June 2018 ARCHITECTURAL, DESIGNER, BUILDER HARDWARE CONTENTS Finish Codes Entrance Handlesets & Lever Plate Entrance Handlesets 02 03 Multipoint Lock Gear and
More informationDoor Closers. General Information
General Information Hager Companies offers a variety of surface door closers to meet a wide range of applications and uses. Heavy Duty, Grade 1 door closers are ideal for schools, hospitals, and other
More informationSYLVAN WAY LIBRARY FIRE DOORS REQUEST FOR BID
SYLVAN WAY LIBRARY FIRE DOORS REQUEST FOR BID Kitsap Regional Library is currently seeking quotes for replacement and installation of fire rated frames, doors and hardware at the Sylvan Way branch. There
More informationIves - Residential 07 WINDOW LOCKS 2 ELBOW CATCH 25 SCREEN DOOR PULL 026 BAR WINDOW LIFT
07 WINDOW LOCKS Material Brass or Aluminum Vertical and horizontal cam action for snug non rattling fit Heavy gauge spring for long wearing action Meets ANSI A156.16 Include screws ABS-AMERICAN BUILDING
More information7100(F) series. A conventional exit device for single swing doors or pairs of doors of metal, wood or composite construction.
Page Revised Electronically 12/12 7000 series architectural exit devices introduction Yale 7000 series exit devices deliver an unparalleled combination of durability, breadth of line, innovation and aesthetics.
More informationMonarch XX Series. Crossbar Exit Device
Monarch XX Series Crossbar Exit Device THE FALCON DIFFERENCE S A F E T Y, S E C U R I T Y A N D U N C O M P R O M I S I N G V A L U E At Falcon, we know that every product you sell not only has to meet
More informationProduct Presentation
2016 Product Presentation DOOR SILLS Inswing Door Sills Entry and Patio WEATHER RESISTANT Solid foam PVC base provides added thermal resistance (thermally-broken) Non-rot, water and termite resistant Closed-cell
More informationAdams Rite. Standard & Heavy Duty Deadlatches Series Heavy Duty Deadlatch
Standard & Heavy Duty Deadlatches 4900 Series Heavy Duty Deadlatch Function: Flexibility of traffic control and installation is offered by the 4900 Series Deadlatches. A reverse turn of the key while bolt
More informationSTC 46 3-Sided Paired Frame (Double Rabbet Only)
(Toll Free) Phone 866-452-1845 Fax 910-452-1848 STC 46 3-Sided Paired Frame (Double Rabbet Only) FRAME PART DIMENSIONS E E THROAT THROAT MINIMUM 3 5/16" MAXIMUM 13" D A=Jamb Depth MINIMUM 4 5/16" MAXIMUM
More informationThrough and through, our metal frames stand strong.
14 10 15 11 Through and through, our metal frames stand strong. As the oldest hollow metal fabricator in the United States, Mesker is the nationwide authority for many architects and contractors. We are
More informationWOOD AND CLAD COMMERCIAL DOOR WOOD AND CLAD 2 1/4 COMMERCIAL DOOR. Table of Contents
WOOD AND CLAD COMMERCIAL DOOR WOOD AND CLAD 2 1/4 COMMERCIAL DOOR Table of Contents PAGE History... 2 Part Identification Wood Commercial Door XX RHRA... 3 Part Identification Wood Commercial Door Stationary
More informationSTANDARD ENTRANCES TECHNICAL MANUAL
TECHNICAL MANUAL FEATURES FEATURES Narrow stile doors have a 2 1/2" top rail, 3 7/16" bottom rail, and 2 1/16" vertical stiles Medium stile doors have a 3 7/16" top rail, 6 7/16" bottom rail, and 3 7/16"
More information4000 Series. The Gainsborough 4000 Series Heavy Duty Cylindrical Locksets KEY IN KNOB LOCKSETS
The Gainsborough 4000 Series Heavy Duty Cylindrical Locksets are designed and manufactured for use in commercial buildings, including hotels and offices, but are also ideal for residential entrances and
More informationC-Series & S-Series Classic Frame with Transom (Single or Pair)
1. TOOLS REQUIRED Tape measure 6' magnetic level 3' magnetic level Safety Glasses Screw gun #2 Screwdriver tip #3 Screwdriver tip Philips Head screwdriver (Used to move frame on wall using oval slots on
More informationFloor Stops - Dome. FS13 Dome Stop. FS17 Dome Stop. R14 Riser. Features:
Floor Stops - Dome FS13 Dome Stop Standard FS13 for use where no threshold is used. Heavy-Duty Cast Dome Stops constructed of brass. Unique riser design of R14 (below) allows easy conversion to threshold
More information350/500 Heavy Wall TM IR Entrances
SEPTEMBER, 207 FEATURES Hurricane Resistant Product Blast Mitigation Product Features 50 Heavy Wall TM IR medium stile has vertical stiles, top and 6-/ (65.) bottom rails 500 Heavy Wall TM IR wide stile
More information7.01. Door Hardware & Accessories
7.01 Door 7.02 Mid-Panel Concealed Vertical Rod Panic First Choice 3100 Series Exit Device 7.03 P092 Mortised Butt Hinge Both leaves of this hinge are punched and countersunk so they can be mortised into
More informationBravura. UL Listed Commercial Locksets FORGED. Designs from Great European Homes. Fall 2009
Designs from Great European Homes FORGED UL Listed Commercial Locksets Fall 2009 Many hotel, condo, apartment and office projects require locks with a UL fire rating. offers both tubular and mortise locks
More informationSTC 42 3-Sided Single Frame (Double Rabbet Only)
(Toll Free) Phone 866-452-1845 Fax 910-452-1848 STC 42 3-Sided Single Frame (Double Rabbet Only) FRAME PART DIMENSIONS E E THROAT THROAT MINIMUM 3 5/16" MAXIMUM 13" D A=Jamb Depth MINIMUM 4 5/16" MAXIMUM
More informationPROJECT LOCATION SECTION PREFINISHED STEEL DOOR FRAMES
SECTION 08 1213.17 PART 1 - GENERAL 1.01 SECTION INCLUDES A. Prefinished steel door frames. B. [Sidelites] [, borrowed lites] [, and transom] assemblies. 1.02 RELATED REQUIREMENTS A. Section 06 2000 Finish
More informationSECTION FINISH HARDWARE
SECTION 08710 PART I - GENERAL 1.01 DESCRIPTION A. Scope: Work under this Section shall include all materials and installation necessary to provide Finish Hardware as shown and detailed on the Drawings
More informationMortise Locks. European Mortise Locks Series EML Features Ordering String Functions Trim Sets European Profile Cylinders Specifications
2 Mortise Locks 2 c 3 4 6 9 22 24 European Mortise Locks Series EML Features Ordering String Functions Trim Sets European Profile Cylinders Specifications 2016 02 2 FSB North America European Mortise Lock
More informationM O R T I S E L O C K S
MORTISE LOCKS lock design M certification / compliance Locks comply with UL 10B, Fire Tests of Door Assemblies, and UL 10C, Positive Pressure Fire Tests of Door. Door Assemblies and the Uni form Building
More informationMINIMALIST DOOR FRAMES
MINIMALIST DOOR FRAMES MINIMALIST DOOR FRAMES TIMELESSLY TRIMLESS. ENGINEERED PRODUCT SYSTEMS / DOOR FRAMES Fry Reglet's unique family of trimless door frame enhances modern design with all the functionality
More informationFine Builders and Home Hardware
Fine Builders and Home Hardware Since 1876, IVES has been manufacturing fine builders and home hardware with a tradition of product quality and customer service that has established them as an industry
More informationDOORS, HINGES, PIVOTS
Section Table of Contents DOORS,, PIVOTS SECTION 3 D Door Frames... 94 Doors... 94 Door Sweeps... 96 H Hinges... 95 100 N P Hinge Pins... 99 NSP Pivots... 100 Pivots... 100 Vendors ABH... 95 Adams Rite...
More informationInstallation Instructions. 45 and 60-Minute Fire-Rated Neutral Pressure Veneered Door Frame UBC & UL-10C
Installation Instructions 45 and 60-Minute Fire-Rated Neutral Pressure Veneered Door Frame UBC 7-2-1997 & UL-10C Door Requirements: Consult the door manufacturer to make sure that the doors are qualified
More informationInstallation Instructions. 45 and 60-Minute Positive Pressure Fire-Rated Veneered Door Frame UBC & UL-10C
Wood Doors Installation Instructions 45 and 60-Minute Positive Pressure Fire-Rated Veneered Door Frame UBC 7-2-1997 & UL-10C Positive Pressure Category Requirements: Category C The Maiman Company Fire
More informationSteel Door Frame Installation in Steel Stud Construction
Steel Door Frame Installation in Steel Stud Construction This manual provides step-by-step instructions for the installation of a steel door frame in steel stud construction. It is a companion piece to
More informationSECTION HOLLOW METAL DOORS AND FRAMES
PART 1 GENERAL 1.01 SECTION INCLUDES SECTION 08 11 13 HOLLOW METAL DOORS AND A. Non-fire-rated hollow metal doors and frames. B. Hollow metal frames for wood doors. C. Fire-rated hollow metal doors and
More informationMINIMALIST DOOR FRAMES
MINIMALIST DOOR FRAMES MINIMALIST DOOR FRAMES TIMELESSLY TRIMLESS. ENGINEERED PRODUCT SYSTEMS / DOOR FRAMES Fry Reglet's unique family of trimless door frame enhances modern design with all the functionality
More informationED3000 Series. Exit Device Parts Manual
ED3000 Series Exit Device Parts Manual Table of Contents Functions...3 ED3200 Series Rim Exit Device...4 ED3200A Series Rim Exit Device - Fire Rated...5 ED3400 Series Surface Vertical Rod Exit Device...-7
More informationDoor Thickness For Cylindrical Door Locks with PB-CW PB-CW S-CW BZ-CW 612
Door Reinforcers Application Part No. Finish Overall Size Back Set Door Thickness For Cylindrical Door Locks with 2 1 8 2-PB-CW 605 hole, 9 height. 9 2 3 8 1 3 2-S-CW 630 3-BZ-CW 612 3-PB-CW 605 1 9 2
More information4-lite Patio Door. Installation Instructions
4-lite Patio Door Installation Instructions IMPORTANT: Read the instructions and familiarize yourself with the door parts and pieces before beginning assembly and installation. Note: Only the 5-0 x 6-8
More informationCONTENTS. Custom Entrances and Hardware
CONTENTS A2/1 CONTENTS SECTION A2...CUSTOM ENTRANCES AND HARDWARE* PAGE PRICING EXAMPLES... A2/3 A2/4 190/350/500 BASE DOOR DOOR CHASSIS... A2/5 DOOR GLAZING/WEATHERING OPTIONS... A2/6 DOOR BOTTOM RAIL
More information55 Series Exit Device
55 Series Exit Device 55 Exit Devices Index Introduction........................................................................... 3 Exit Hardware Rim device............................................................................
More informationIves Pemko Hager 112HD FMSLFHD HD 224HD FMHD HD 210HD FSHD HD 157HD FSCPHD HD
PART 1 - PRODUCTS 1.1 FASTENERS A. All exposed fasteners shall be Phillips head or as otherwise specified, and shall match the finish of the adjacent hardware. All fasteners ex-posed to the weather shall
More informationFINISH HARDWARE. UNIVERSITY CONTACT: Mark Golden, Manager, Structural Services (302)
FINISH HARDWARE UNIVERSITY CONTACT: Mark Golden, Manager, Structural Services (302)831-2935 PART 1 GENERAL 1.01 GENERAL PROVISIONS A. The drawings and General Provisions of the contract, including the
More informationDOOR STOPS & BUMPERS See page 321 for finish descriptions.
CR-DH25 US3, 26D 4" Zinc Diecast Drop Down Door Holder CR-SBDH5 US3, 10, 10B 5" Solid Brass Kick Down Door Holder. Base 7/8" x 1-3/4" (Ives #455) CR-GS118* US3, 4, 10, 10B, 15A Door Stop 2-1/8" high *w/hanger
More informationDOOR REINFORCERS. For Cylindrical Door Locks with 2 1 / 8" hole, 9" height. 3-PB-CW /4" 9" 2 3 /4" 1 3 /8" S-CW
Published list prices, please login or contact a sales representative for your pricing. DON-JO Price Book, September 1, 2012 DOOR REINFORCERS Application Part No. Finish Overall Size Back Set Door Thickness
More informationB. Shop Drawings: Include elevations, door edge details, frame profiles, metal thicknesses, preparations for hardware, and other details.
SECTION 081113 - HOLLOW METAL DOORS AND FRAMES PART 1 - GENERAL 1.1 SUMMARY A. Section Includes: 1. Standard hollow metal doors and frames. 1.2 SUBMITTALS A. Product Data: For each type of product indicated.
More informationDENVER PUBLIC SCHOOLS DESIGN AND CONSTRUCTION STANDARDS This Standard is for guidance only. SECTION METAL LOCKERS
PART 0 A/E INSTRUCTIONS 0.01 GENERAL DESIGN REQUIREMENTS A. Architect shall coordinate with the DPS Project Manager the type, layout and size of lockers required on the project. B. Varsity athletic Lockers
More informationMEETS ADA REQUIREMENTS!
PUSH / PULL LATCH HL-6 MEETS ADA REQUIREMENTS! HL-6/EO EXIT ONLY LATCH HL-6/EO Exit Only Latch for applications where only one side of door is used for exit or entry. Ideal for situations where the security
More informationArchitectural/Commercial
BROSCO s Commercial Shop includes fully licensed Warnock-Hersey, Inc/Intertek Testing Services (WHI/ITS) labeling services for Wood Doors and Hollow Metal Products. BROSCO s State-of-the-art wood door
More informationKarpen. Steel. Custom Doors & Frames. The Custom Quick-Ship Professionals. Division
Karpen Steel Custom Doors & Frames The Custom Quick-Ship Professionals Division 08 1110 right. time. MADE ON When we call ourselves The Custom Quick-Ship Professionals, it s not a declaration we take lightly.
More informationContents. The undisputed leader in door accessory hardware /ING BuyLine 2600
08 71 00/ING BuyLine 2600 STEELCRAFT The undisputed leader in door accessory hardware. For more than 120 years Ives has produced a full line of top quality building hardware that delivers the utmost application
More informationMetal Sound Retardant Door Hardware Information Bulletin
574 West Otterman Street Greensburg, PA 15601 Toll Free: (800) 979-7300 Local: (724) 834-7300 Fax: (724) 830-2871 Email: overly@overly.com DOOR COMPANY Metal Sound Retardant Door Hardware Information Bulletin
More informationDIVISION 8 DOORS AND WINDOWS. 1. Exterior and interior single doors shall be 1-3/4 inch thick, 3 feet wide, and 7 feet high, minimum.
8.01 DOORS AND FRAMES (12-2-02) A. Doors DIVISION 8 DOORS AND WINDOWS 1. Exterior and interior single doors shall be 1-3/4 inch thick, 3 feet wide, and 7 feet high, minimum. 2. Where required for maintenance
More informationLABEL & RATING OPTIONS
LABEL & RATING OPTIONS FIRE LABELING GUIDELINES APPLICATION MAXIMUM SIZE HOURLY RATING Single Door 4'0" wide x 10'0" high Up to 3 hour 4'3" wide x 10'0" high Up to 1-1/2 hour Pair 8'0" wide x 10'0" high
More informationTechnical Data Series Revised: 16 June, 2015
Technical Data Series Revised: 16 June, 2015 Page 1 of 23 Article V. SECTION 5.01 SPECIFICATIONS... 3 (a) Door Specifications... 3 (b) Frame Specifications... 3 (c) Door and Frame Finish... 3 (d) Subframing...
More informationWindowAndDoorParts.US
Knob/Push Pull Latch Sets Tulip Knob Latch, Single Hole 17-52 Aluminum Installs in single hole bore 1-1/4" diameter. Tulip Knob Latch 17-59 17-60 Aluminum Tulip Knob Latch "No Lock Out" Feature 17-61 Aluminum
More informationSECTION DOOR HARDWARE
PART 1 - GENERAL 1.1 DESCRIPTION SECTION 08 71 00 1. Use this section only for NCA projects. 2. Delete between // --- // if not applicable to project. Also delete any other item or paragraph not applicable
More informationIves - Residential #07 WINDOW LOCKS #2 ELBOW CATCH #25 SCREEN DOOR PULL #026 BAR WINDOW LIFT
#07 WINDOW LOCKS Material Brass or Aluminum Vertical and horizontal cam action for snug non rattling fit Heavy gauge spring for long wearing action Meets ANSI A156.16 Include screws ABS-American Building
More information8000 SERIES SERIES HEAVY-DUTY MODELS
GRADE 1 ARCHITECTURAL TYPE EXIT DEVICES 8000 SERIES SERIES HEAVY-DUTY MODELS FEATURES All devices are non-handed design Slight pressure on device touch bar will retract latch(s) for immediate exit Auxiliary
More information7100(F) series. A conventional exit device for single swing doors or pairs of doors of metal, wood or composite construction.
Page Revised Electronically 12/12 7000 series architectural exit devices introduction Yale 7000 series exit devices deliver an unparalleled combination of durability, breadth of line, innovation and aesthetics.
More informationSafety glasses Measuring tape Level Pencil Power drill Center punch Phillips screw driver Saw horse
EX76 Concealed Vertical Rod Exit Device Preparation Guide and Installation Instructions Box Contents EX76 Concealed Vertical Rod Exit Device Back Bar Active Push Bar Filler Plate Door Kit with Templates
More informationCheckmate Stops & Holders. Absolute Door Control and Entire Opening Protection
Checkmate Stops & Holders Absolute Door Control and Entire Opening Protection checkmate stops & holders TABLE OF CONTENTS General Information...3 How to Select Product...4 Options...5 Certifications...5
More information3-LITE PATIO DOOR INSTALLATION INSTRUCTIONS
3-LITE PATIO DOOR INSTALLATION INSTRUCTIONS IMPORTANT: Read the instructions and familiarize yourself with the door parts and pieces before beginning assembly and installation. TOOLS NEEDED: Tape Measure
More information