Exit Devices 10 SERIES 1200 SERIES 20 SERIES
|
|
|
- Sheila Cain
- 5 years ago
- Views:
Transcription
1 Exit Devices 10 SERIES Concealed Vertical Rod Device P-L-7 CVR Paddle - Engraved "Push" - LHR P-R-7 CVR Paddle - Engraved "Push" - RHR L-C-4 Rim Exit Device - LHR R-C-4 Rim Exit Device - RHR P-L-C Rim Paddle - Engraved "Push" - LHR P-R-C Rim Paddle - Engraved "Push" - RHR ' Mullion for , , J Mortise Cylinder Mounting Pad for CVR - L/C " Top Rod Extender for CVR SERIES L-4 Concealed Vertical Rod Device - LHR R-4 Concealed Vertical Rod Device - RHR C-4 Rim Exit Device J Mortise Cylinder Mounting Pad for CVR - L/C " Top Rod Extender for CVR SERIES L-3-7 CVR - Top Latch & Bottom Bolt - LHR R-3-7 CVR - Top Latch & Bottom Bolt - RHR L-4-7 CVR - Top Latch & Bottom Bolt - LHR R-4-7 CVR - Top Latch & Bottom Bolt - RHR L-3-7 CVR - Top & Bottom Bolt - LHR R-3-7 CVR - Top & Bottom Bolt - RHR L-4-7 CVR - Top & Bottom Bolt - LHR R-4-7 CVR - Top & Bottom Bolt - RHR L-3-7 Rim Device - LHR R-3-7 Rim Device - RHR L-4-7 Rim Device - LHR R-4-7 Rim Device - RHR J Mortise Cylinder Mounting Pad for CVR - L/C " Top Rod Extender for CVR hdwsales@midwestwholesale.com quotes@midwestwholesale.com 95
2 Overhead Concealed Closers CENTER-HUNG Product Swing Size Function Closer Package * RD NHO * RD HO * RD NHO * RD HO * LD NHO * XLD NHO * XLD HO * XLD NHO * XLD HO * ADJ NHO * ADJ HO * ADJ NHO * ADJ HO *-01-B ANSI Grade 1 w/bc 105 RD NHO *-02-B ANSI Grade 1 w/bc 105 RD HO *-03-B ANSI Grade 1 w/bc 90 RD NHO *-04-B ANSI Grade 1 w/bc 90 RD HO *Specify package; AP, GE, GW, P, PE, PV, S, & U. For mechanism only specify M and start part # with 20- END-LOAD Package contents Package Closer body Arm Pkg Mounting Brackets Pivot Type AP * GW * P * PE * *Select from above SIDE-LOAD Package contents Package Closer body Arm Pkg Mounting Brackets Pivot Type GE * B PV * B S * B U * B *Select from above midwestwholesale.com
3 B ARMS B Side Load Arm 1 / 2 " deep rail End Load Arm 1" deep rail End Load Arm 7 / 8 " deep rail End Load Arm 5 / 8 " deep rail MOUNTING BRACKETS Mounting Clip Package Mounting Clip Package Mounting Clip Package Mounting Clip Package FLOOR PIVOTS (type G) Side Load (type GE) Side Load (type P) End Load (type GW) End Load hdwsales@midwestwholesale.com quotes@midwestwholesale.com 97
4 Overhead Concealed Closers continued OFFSET SLIDE-ARM Product Swing Size Function * RD NHO * RD HO * RD NHO * RD HO * LD NHO * XLD NHO * XLD HO * XLD NHO * XLD HO * ADJ NHO * ADJ HO * ADJ NHO * ADJ HO *-01-B ANSI Grade 1 w/bc 105 RD NHO *-02-B ANSI Grade 1 w/bc 105 RD HO *-03-B ANSI Grade 1 w/bc 90 RD NHO 313, 628 Closer Package Mechanism Only *-04-B ANSI Grade 1 w/bc 90 RD HO *Specify package; A, A4, P, or S available from inventory. For mechanism only specify M and start part # with 20-. OFFSET PIVOT or BUTT Package contents Package Closer body Arm Pkg Mounting Brackets Slide Channel A * A4 * P * S * *Select from above midwestwholesale.com
5 ARMS 628, ( ) Mortise Type 7 / 8 " deep rail Surface Mounted 5 / 8 " deep rail MOUNTING BRACKETS Mounting Clip Package Mounting Clip Package Mounting Clip Package SLIDE CHANNEL ASSEMBLY " length / 8 " length hdwsales@midwestwholesale.com quotes@midwestwholesale.com 99
6 Pivots J25 J26 J27 J28 J30 J31 J40 J41 ¾" OFFSET PIVOT SETS Product Number Description 313, J25L Flush w/frame face - LH 41-J25R Flush w/frame face - RH 41-J26L Recessed 1 / 8 " - LH J26R Recessed 1 / 8 " - RH OP27NH Flush w/frame face OP28NH Recessed 1 / 8 " OP30LH Flush w/frame face - LH OP30RH Flush w/frame face - RH OP31LH Recessed 1 / 8 " - LH OP31RH Recessed 1 / 8 " - RH OP40LH Recessed 1 / 8 " - LH OP40RH Recessed 1 / 8 " - RH OP41LH Recessed 3 / 32 " - LH OP41RH Recessed 3 / 32 " - RH ¾" OFFSET INTERMEDIATE PIVOTS Product Number Description 313, J-190-L Full Mortise - LH J-190-R Full Mortise - RH CENTER-HUNG PIVOT SET Product Number Description 313, M For 1¾" Aluminum Door & Frames midwestwholesale.com
7 Exit Device Parts 1085/1085P PARTS Right Body & Arm Assembly Left Body & Arm Assembly Body & Paddle Assembly RHR P Body & Paddle Assembly LHR P Right Arm Assembly Left Arm Assembly PKG Crossbar Assembly - 4/ Top Bolt Guide Assembly Bottom Bolt Guide Assembly Strike Package - top & bottom Dogging Pin Assembly Body Hardware Package Rod & Case Assembly - 7/ Rod & Case Hardware Package /1095P PARTS Active Body & Arm Assembly RHR Active Body & Arm Assembly LHR Inactive Body & Arm Assembly LHR Inactive Body & Arm Assembly RHR Body & Paddle Assembly RHR P Body & Paddle Assembly LHR P Push Paddle Assembly RHR P Push Paddle Assembly LHR P Backplate Sub-Assembly RHR Backplate Sub-Assembly LHR Right Arm Assembly Left Arm Assembly PKG Crossbar Assembly - 4/ Dogging Pin Assembly PARTS Cover Plate Package of Latch Assembly Package Dogging Assembly hdwsales@midwestwholesale.com quotes@midwestwholesale.com 101
8 Exit Device Parts continued 1285 PARTS Top Bolt Guide Assembly Bottom Bolt Guide Assembly Strike Package - top & bottom Rod & Case Hardware Package Base End Cap Package Left Actuating Lift Assembly - LHR Right Actuating Lift Assembly - RHR Dogging Assembly Push Pad End Cap Pkg of /2086 PARTS Complete Active Head Assembly - LHR Complete Active Head Assembly - RHR Push Pad End Cap Package Base End Cap Package Top Bolt Guide Assembly Bottom Bolt Guide Assembly Strike Package - top & bottom Rod & Case Assembly - 7/ Rod & Case Hardware Package Top Latch Assembly Dogging Assembly - RHR Dogging Assembly - LHR PARTS Active Head Assembly Active Head Cover Package Push Pad End Cap Package Base End Cap Package Active Head Base Plate Assembly Dogging Assembly - RHR Dogging Assembly - LHR midwestwholesale.com
Deadlatch 451 Series. Faceplates - Deadlatch. Strikes - Deadlatch. DeadLatch for Aluminum Stile Doors. Non-Handed. 451 NC0772 1¹ 8 Backset Deadlatch 4
Mortise Locks 185 Series Mortise Locks for Aluminum Stile Doors. Non-Handed. 185 NA0019 1¹ 8 Backset Deadbolt HB185 NB0123 Faceplates - Deadbolt FP-DB-F-NH-628 NE0000 Flat FP-DB-F-NH-313 NE0001 FP-DB-B-RH-628
33/35A Series. Devices covered by these instructions: Rim Exit Device. CD33/35A Rim Exit Device EL33/35A Rim Exit Device SS33/35A Rim Exit Device
911402-00 Rim Exit Device 33/35A Series Installation Instructions Devices covered by these instructions: 33/35A Rim Exit Device CD33/35A Rim Exit Device EL33/35A Rim Exit Device SS33/35A Rim Exit Device
33/3527A. Devices covered by these instructions: 33/3527A-F (Fire) Surface Vertical Rod Exit Device
*911403-00* 911403-00 Surface Vertical Rod Exit Device 33/3527A Installation Instructions Devices covered by these instructions: 33/3527A Surface Vertical Rod Exit Device 33/3527A-F (Fire) Surface Vertical
4600 Series Rim Narrow Stile Exit Device Installation Instructions I-ED01162
DEVICES COVERED IN THIS DOCUMENT: 4600 Series Rim Panic Narrow Stile Exit Device 4600 Series Rim Fire Narrow Stile Exit Device OVERVIEW Outside of Door RHR LHR Inside of Door APPLICATIONS 4950 BLADE STOP
INSTALLATION INSTRUCTIONS. Thermal Entrances AA 250/AA 425 THERMAL DOOR WITH TRIFAB 601/601T FRAMING
JANUARY, 2014 1 INSTALLATION Thermal Entrances AA 250/AA 425 THERMAL DOOR WITH TRIFAB 601/601T FRAMING INSTRUCTIONS 2 FRAME ASSEMBLY JANUARY, 2014 601442 SHEAR BLOCK BALL BEARING NRP BUTT (FACTORY APPLIED
CONCEALED VERTICAL ROD PANIC EXIT DEVICE
INSTALLATION INSTRUCTIONS CRL JACKSON 1085-1085P CONCEALED VERTICAL ROD PANIC EXIT DEVICE crlaurence.com Phone: (800) 421-6144 Fax: (866) 921-0531 crlaurence.com usalum.com crl-arch.com 11M0236 ORDER OF
Note: The dimensions of the Template are shown in inches. See attached page for the Metric Conversion Table for millimeters.
801 Avenida Acaso, Camarillo, Ca. 93012 (805) 494-0622 www.sdcsecurity.com E-mail: service@sdcsecurity.com These instructions are presented a in step by step sequence. Please read it through before installation.
33/3547A. Special tools needed: #10-24 tap Drill bits: #25, 5/16, 13/32, 1/2
911404-00 Concealed Vertical Rod Exit Device 33/3547A Installation Instructions Devices covered by these instructions: 33/3547A and 33/3548A Concealed Vertical Rod Exit Device 33/3547A-F and 33/3548A-F
PUSH BAR EXIT DEVICES CROSS BAR EXIT DEVICES NARROW STILE EXIT DEVICES FEATURING LCWD STRIKES... 20
Flat Goods Section TABLE OF CONTENTS EXIT DEVICES PUSH BAR EXIT DEVICES N1500 Heavy Duty Rim Exit Device N1550 Rim Exit Device... 6 N1650 Fire Rated Heavy Duty Exit Device N1700(F) Vertical Rod Heavy Duty
INSTALLATION INSTRUCTIONS CRL JACKSON
INSTALLATION INSTRUCTIONS CRL JACKSON 1285 CONCEALED VERTICAL ROD PANIC EXIT DEVICE crlaurence.com Phone: (800) 421-6144 Fax: (866) 921-0531 crlaurence.com usalum.com crl-arch.com 11M0248 ORDER OF ASSEMBLY
custom entrances and hardware
custom entrances and hardware Table of Contents Custom Entrances (B1) Loose Hardware and Fabrication (B2) Custom Entrances and Modifications (B1) Table of Contents Entrance Door Handing page 3 CUSTOM ENTRANCES
Exit Device 5820 SERIES GRADE 1 PUSH BAR SPECIFICATIONS HEAD COVER OPTIONS STRIKES APPLICATION.
Exit Device 5820 SERIES GRADE 1 PUSH BAR 5820F Fire-Rated Mortise Lock Exit Device 5820FSF Failsafe Electric Mortise Exit Device 5820FS Failsecure Electric Mortise Exit Device HEAD COVER OPTIONS HC-1 HC-2
*D-1030* 1 PARTS CHECK 8 REVERSING INSTRUCTIONS F-XX-C & XX-C D Customer Service. Installation Instructions. Exit Devices
*D-1030* D-1030 F-XX-C & XX-C Exit Devices Installation Instructions 8 REVERSING INSTRUCTIONS TO REVERSE THE HANDING OF A (F)XX-C DEVICE NOTE: TO REVERSE TRIM, REFER TO SEPARATE INSTALLATION SHEETS. 1
Finish Hardware. Contents. Section 10
Section 10 Finish Hardware Contents 10.0.0 Introduction to contents 10.1.0 Door hinges (types and illustrations) 10.2.0 Locksets and latchset configurations and functions 10.3.0 Heavy-duty mortise cases,
ED1300/1300F SERIES CONCEALED VERTICAL ROD DEVICE INSTALLATION INSTRUCTIONS
ED1300/1300F SERIES CONCEALED VERTICAL ROD DEVICE INSTALLATION INSTRUCTIONS Ver.2 1300 SERIES CONCEALED VERTICAL ROD DEVICE Top Strike Latch Screws Strike Screws Release Plunger Top Latch Plunger Screws
Checkmate Stops & Holders. Absolute Door Control and Entire Opening Protection
Checkmate Stops & Holders Absolute Door Control and Entire Opening Protection checkmate stops & holders TABLE OF CONTENTS General Information...3 How to Select Product...4 Options...5 Certifications...5
98/9927. Devices covered by these instructions: Surface Vertical Rod Exit Device
911375-00 Surface Vertical Rod Exit Device 98/9927 Installation Instructions Devices covered by these instructions: 98/9927 Surface Vertical Rod Exit Device 98/9927-F (Fire) Surface Vertical Rod Exit Device
1530(F) Mortise Exit Devices Installation Instructions
1530(F) Mortise Exit Devices Installation Instructions Singe Doors or Pairs (2) 12-12-24 PFHUM/WS 798 Universal Strike Standard Device Package Devices are packed ready for application reinforced metal
ED5200(A) Series Rim Exit Devices
ED5200(A) Series Rim Exit Devices Installation Instructions (Single Doors or Pairs with Mullion) FM156 4/10 (617350602) For Metal, Composite and Wood Doors of Either Hand End Clamp (3) 8-32 x 5/16" Flat
Adams Rite. Standard & Heavy Duty Deadlatches Series Heavy Duty Deadlatch
Standard & Heavy Duty Deadlatches 4900 Series Heavy Duty Deadlatch Function: Flexibility of traffic control and installation is offered by the 4900 Series Deadlatches. A reverse turn of the key while bolt
INSTALLATION INSTRUCTIONS CRL JACKSON
INSTALLATION INSTRUCTIONS CRL JACKSON 3185 MID-PANEL CONCEALED VERTICAL ROD PANIC EXIT DEVICE crlaurence.com Phone: (800) 421-6144 Fax: (866) 921-0531 crlaurence.com usalum.com crl-arch.com 11M0252 ORDER
Push Plates. Published list prices. Please login or contact a sales representative for your pricing.
1001 Push Plates 605 613 628 630 1001-1 Push Plate 3 12 10.00 1001-11 Push Plate 8 16 63.00 63.00 42.00 1001-2 Push Plate 3½ 15 24.00 27.00 12.00 1001-3 Push Plate 4 16 27.00 32.00 11.00 13.00 1001-9 Push
55 Series Exit Device
55 Series Exit Device 55 Exit Devices Index Introduction........................................................................... 3 Exit Hardware Rim device............................................................................
World s Leading Manufacturer Of Traffic Doors. Supplemental Instructions for the Single and Double Door Order Form
World s Leading Manufacturer Of Traffic Doors Supplemental Instructions for the Single and Double Door Order Form World s Leading Manufacturer Of Traffic Doors 2809 SW th Street Redmond, OR 97756 Phone:
BEFORE STARTING INSTALLATION
VON DUPRIN Installation Instructions 22 Rim Device Devices covered by these instructions: 22 Rim Device 22-F Fire Exit Rim Device BEFORE STARTING INSTALLATION 1. Check hardware schedule for strikes, fasteners,
Shim (2) Supplied. Strike Plate. (3) x 5/8" PFHMS or 10 x 1" PFHWS. Top Latch. (3) x 1/4" PRHMS. Latch Cover. (2) 8 x 3/8" PFH AB SMS
Installation Instructions ED5400 (A) Series ED5470 (B) Series Surface Vertical Rod Exit Devices Strike Angle Must Engage Strike Top Strike 10-24 PFHMS Top Bracket and Strike required for ED5470. Shim (2)
400 Toll Free: (800) Phone: (718) Fax: (718) RIXSON Overhead Holders. Closer-Holder Packages
Checkmate and Stops General Information Overhead stops are used to protect door assemblies.they cut down the wear and tear of frequency, closing mechanisms, wind gusts, abuse and vandalism. By limiting
s tops & holder s Absolute Door Control and Entire Opening Protection
check mate s tops & holder s Absolute Door Control and Entire Opening Protection Copyright 2001-2018, ASSA ABLOY Accessories and Door Controls Group, Inc. All rights reserved. Reproduction in whole or
930 Series Mortice Exit Device
930 Series Mortice Exit Device BS EN 1125:1997+A1:2001 Classification Code 37601322B The Adams Rite 930 Series Mortice Exit Device is a life safety device which is designed to fit timber or hollow steel
Mortise Locks 185 Series
Mortise Locks 185 Series Mortise Locks for Aluminum Stile Doors. Non-Handed. 185 NA0019 11/8 Backset Deadbolt HB185 NB0123 Faceplates - Deadbolt FP-DB-F-NH-628 NE0000 Flat FP-DB-F-NH-313 NE0001 FP-DB-B-RH-628
ED5800 (A) Series. Installation Instructions. Concealed Vertical Rod. Exit Device WARNING
Strike Shim (2) Supplied Strike Plate (3) 10-24 x 3/4" PFHMS (6) 10-24 x 1/2" PFHMS Top Latch TopTube Concealed Vertical Rod Exit Device Important: For use with metal doors only. Device is packed ready
D3976 RECESSED EXIT INSTALLATION INSTRUCTIONS
PACKAGE CONTENTS PRODUCT MUST BE INSTALLED ACCORDING TO ALL APPLICABLE BUILDING AND LIFE SAFETY CODES TEMPLATE INSTALLATION INSTRUCTIONS STRIKE HAND TOOL 5/32 HEX KEY ROD END CAPS EXIT DEVICE CRANK ARM
INSTALLATION INSTRUCTIONS CRL JACKSON
INSTALLATION INSTRUCTIONS CRL JACKSON 2085 CONCEALED VERTICAL ROD PANIC EXIT DEVICE crlaurence.com Phone: (800) 421-6144 Fax: (866) 921-0531 crlaurence.com usalum.com crl-arch.com 11M0250 ORDER OF ASSEMBLY
Installation Instructions
VON DUPRIN Installation Instructions 98/9947WDC Concealed Vertical Rod Exit Device Wood Door Applications Devices covered by these instructions: 98/9947WDC Concealed Vertical Rod Device 98/9947WDC-F (Fire)
Series D200 Narrow Stile Series D300 Medium Stile * D500 Wide Stile ** Standard Aluminum Swing Entrance Doors
E F C O C O R P O R A T I O N Visit us on the web at efcocorp.com IMPACT GRADE BALLISTIC GRADE Series D200 Narrow Stile Series D300 Medium Stile * D500 Wide Stile ** Manufacturer Configurations Narrow
8900 Mortise Lock Exit Device 80 Series
8900 Mortise Lock Exit Device 8900 Series Mortise Lock Exit Device Specifications for 8900 Mortise Lock Exit 8900 Features Designed for standard width stile applications on wood and metal doors Concealed
Hookbolt. Non Handed. Flat LH Bevel RH Bevel Radius Radius with Weather-strip. Radius Flat Bevel
Mortise Locks deadlatch Deadbolt Hookbolt Function: Deadbolt, Hookbolt, Deadlatch Backset: 31/32", 1-1/8", 1-1/2" Face Plate: 1"W x 6-7/8" L - Aluminum Case Dimensions: 7/8"W x 6"L x Depth specific to
OVERVIEW. Mounting Post (2 places) Cylinder Cam. Handing Pin
DEVICES COVERED IN THIS DOCUMENT: 46CE Cylinder Escutcheon Key locks and 46DT Dummy Trim Pull when dogged unlocks lever 46BE Blank Escutcheon Always operable 46NL Night Latch Key retracts latchbolt 46NK
Overhead Concealed Closers
Overhead Concealed Closers Introduction Rixson Overhead Concealed closers offer an aesthetically appealing way to close a door. In situations where a closer is needed but concealment is required, Rixson
Safety glasses Measuring tape Level Pencil Power drill Center punch Phillips screw driver Saw horse
EX76 Concealed Vertical Rod Exit Device Preparation Guide and Installation Instructions Box Contents EX76 Concealed Vertical Rod Exit Device Back Bar Active Push Bar Filler Plate Door Kit with Templates
7110(F), 7170(F)(LBR) Surface Vertical Rod Exit Device Series Installation Instructions
7110(F), 7170(F)(LBR) Surface Vertical Rod Exit Device Series Installation Instructions Shim (2) Supplied Strike Plate 791 Strike (3) 10-24 x 3/4 (19mm) PFHMS Strike Angle Must Engage Strike 12-24 FHPMS
7100(F) series. A conventional exit device for single swing doors or pairs of doors of metal, wood or composite construction.
Page Revised Electronically 12/12 7000 series architectural exit devices introduction Yale 7000 series exit devices deliver an unparalleled combination of durability, breadth of line, innovation and aesthetics.
GAMCO CORPORATION GAMCO QUALITY FENESTRATION SYSTEMS & ARCHITECTURAL METALS. Est GAMCO CATALOG Maple Avenue, Flushing NY 11355
GAMCO CORPORATION QUALITY FENESTRATION SYSTEMS & ARCHITECTURAL METALS GAMCO CATALOG 131-10 Maple Avenue, Flushing NY 11355 GAMCO CORPORATION QUALITY FENESTRATION SYSTEMS & ARCHITECTURAL METALS TABLE OF
Table Of Contents. Warranty Terms and Conditions
Table Of Contents Warranty... Exit Devices - Mechanical and Electrified Concealed Vertical Rod (CVR) - 28 Series...2 Rim Exit Devices - 29 Series...2 Electrified Concealed Vertical Rod (CVR) and Rim Devices...3
INSTALLATION INSTRUCTIONS Frames and Entrance Doors
INSTALLATION INSTRUCTIONS Frames and Entrance Doors J 3010 Rice Mine Road, Tuscaloosa, Alabama 35406 1-800-772-7737 Fax 1-800-443-6261 www.coralind.com A Division of Coral Industries, Inc. FRAMES and ENTRANCES
8000 SERIES SERIES HEAVY-DUTY MODELS
GRADE 1 ARCHITECTURAL TYPE EXIT DEVICES 8000 SERIES SERIES HEAVY-DUTY MODELS FEATURES All devices are non-handed design Slight pressure on device touch bar will retract latch(s) for immediate exit Auxiliary
* * 22 & 22-F. Please give these instructions to building owner after device is installed BS EN 1125 : 2008
*911407-00* Rim device 911407-00 22 & 22-F Installation Instructions BS EN 1125 : 2008 Devices covered by these instructions: 22 Rim Exit Device 22-F Rim Fire Exit Device These instructions are presented
3000 Series Exit Devices Premier Product
00 000 Series Exit Devices Premier Product Certification & Compliance: ANSI/BHMA A56., Grade ANSI A7. Accessibility Code Underwriters Laboratories (UL and CUL) listed for accident hazard (panic) standard.
Steel Hawk 4300 Electrified Deadlatch (elatch)
STEEL HAWK 4300 ELECTRIFIED DEADLATCH (ELATCH) DA-1 STEEL HAWK 4300 ELECTRIFIED DEADLATCH (ELATCH) Steel Hawk 4300 Electrified Deadlatch (elatch) Operation Turn key, apply voltage, or operate handle or
Installation Instructions. Installation Type
Installation Instructions 800 & 8050 Slide Track Door Closers Non Hold Open & Hold Open Models Note: Hold open models are not permitted to be installed in Listed fire door assemblies. PULL SIDE MOUNTED
ED3000 Series. Exit Device Parts Manual
ED3000 Series Exit Device Parts Manual Table of Contents Functions...3 ED3200 Series Rim Exit Device...4 ED3200A Series Rim Exit Device - Fire Rated...5 ED3400 Series Surface Vertical Rod Exit Device...-7
Table of Contents Holders & Stops
Copyright 2003, 2007, 2009-2012, Sargent Manufacturing Company, an ASSA ABLOY Group company. All rights reserved. Table of Contents Overview.... 1 General Information.... 2 How to Select Product... 3 Options,
Installation Instructions. Installation Type
Installation Instructions 300 & 3050 Slide Track Door Closers Non Hold Open & Hold Open Models Note: Hold open models are not permitted to be installed in Listed fire door assemblies. PULL SIDE MOUNTED
1790 Touchbar. Installation Instructions. Rim Panic Device ININST Index:
Installation Instructions ININST.1001 1790 Touchbar Rim Panic Device Index: Before Installation... 2 Installation... 2 Touchbar Dogging... 7 RM170 Mullion Installation... 8 Field Sizing Device... 10 2090
ED5200S(A) Series ED5200S(A) Series x M107 Windstorm Series SecureBolt Exit Device
ED5200S(A) Series ED5200S(A) Series x M107 Windstorm Series SecureBolt Exit Device Installation Instructions FM532 3/11 (Single Doors or Pairs with Mullion) For Doors of Either Hand In U.S.: Corbin Russwin,
Table Of Contents. Warranty Terms and Conditions
Table Of Contents Warranty... Exit Devices - Mechanical and Electrified Concealed Vertical Rod (CVR) - 28 Series...2 Rim Exit Devices - 29 Series...2 Electrified Concealed Vertical Rod (CVR) and Rim Devices...3
* * 98/9950WDC. Fire-Rated Devices include these. additional components. 1-Point Latch (LBL)
*24739468* 24739468 98/9950WDC Installation Instructions 1-Point Latch (LBL) Fire-Rated Devices include these additional components Metal Edge Wrap required for 60 and 90-minute applications 2-Point Latch
Architectural Hardware
Architectural Hardware Surface Closers Precision Architectural Closers are designed for heavy duty commercial use. With an adjustable power tension, these closers can handle the lightest ADA Compliant
Infinity 20 Min. FIRE RATED DOORS WARNOCK HERSEY INFINITY - STANDARD RAISED - 20 MIN. RATING SOFTWOOD STILE
Infinity 20 Min Note: 20 Minute (Positive Pressure) Category A & B Manufacturing Specifications MAXIMUM SIZES All doors shall have a minimum thickness of 1-3/4" + 1/16" Single Swing: 4/0 x 9/0 Standard
Note: Use 1 Order Form per Buying Program (1 Week or 3 Week Contract) based on the availability of the product
7 & 10 Line Parts Please Program Required Note: Use 1 Order Form per Buying Program (1 Week or 3 Week Contract) based on the availability of the product Ordering Form: 10 Line Parts 10 Line Parts - Description
7100(F) series. A conventional exit device for single swing doors or pairs of doors of metal, wood or composite construction.
Page Revised Electronically 12/12 7000 series architectural exit devices introduction Yale 7000 series exit devices deliver an unparalleled combination of durability, breadth of line, innovation and aesthetics.
Encore 20 Min. FIRE RATED DOORS WARNOCK HERSEY ENCORE - STANDARD PANEL - 20 MIN. RATING
Encore 20 Min 20 Minute (Positive Pressure) - Category B Manufacturing Specifications MAXIMUM SIZES All doors shall have a minimum thickness of 1-3/4" + 1/16" Single Swing: 4/0 x 8/0 Standard Pair: 8/0
Monarch XX Series. Crossbar Exit Device
Monarch XX Series Crossbar Exit Device THE FALCON DIFFERENCE S A F E T Y, S E C U R I T Y A N D U N C O M P R O M I S I N G V A L U E At Falcon, we know that every product you sell not only has to meet
376E Series Exit devices
376E Series Exit devices The Briton 376E Series is an economical range of push bar devices designed to suit single and double door applications. The 376E Series can be used on aluminium, hollow metal or
1500(F) Rim Exit Devices Installation Instructions
1500(F) Rim Exit Devices Installation Instructions Singe Doors or Pairs (Panic Label) 1500 - RHR 1500 - LHR 1500F - RHR (Fire Label) 1500F - LHR Standard Device Package Devices are packed ready for application
Affinity Site Survey. Address: City: State: Zip: Distributor: ACP #: Address: City: State: Zip: Date Submitted: Requested Installation Date:
For questions concerning pricing and quotes: Wesley Colquitt, Pricing Manager ASSA ABLOY Door Security Solutions wcolquitt@assaablydss-cs.com 0--0 00-- x 0 For questions concerning doors, frames and hardware
TOOLS REQUIRED Metal Wood Wood and Metal Screws. #16 Drill #12-24 Tap. 1/8 Drill
DEVICES COVERED IN THIS DOCUMENT: 4700S Surface Vertical Rod Device 4700SF Fire Exit Surface Vertical Rod Device TOOLS REQUIRED Metal Wood Wood and Metal Screws Sex Bolts #7 Drill ¼ -20 Tap #16 Drill #12-24
Masonry Frames Interior/Exterior* Drywall Frames Interior**
Masonry Frames Interior/Exterior* Step your frame: Wire Masonry Anchor Combo Stud Anchor Existing Opening Anchor Hollow Metal 5-3/4" Standard* Frame Includes: 6 gauge - cold rolled steel - primed galvanneal
CONTENTS. Custom Entrances and Hardware
CONTENTS A2/1 CONTENTS SECTION A2...CUSTOM ENTRANCES AND HARDWARE* PAGE PRICING EXAMPLES... A2/3 A2/4 190/350/500 BASE DOOR DOOR CHASSIS... A2/5 DOOR GLAZING/WEATHERING OPTIONS... A2/6 DOOR BOTTOM RAIL
35mm 110 Deg. Concealed Hinge with Mounting Plate. 35mm 110 Deg. Soft Closing Concealed Hinge. 26mm 95 Deg. Concealed Hinge with Mounting Plate
35mm 110 Deg. Concealed Hinge with Mounting Plate Most economical of our 35mm concealed hinges. 386 41102 00 386 41102 08 386 41102 15 Slide-on Full overlay Self Closing Slide-on Half overlay Self Closing
350/500 Heavy Wall TM IR Entrances
SEPTEMBER, 207 FEATURES Hurricane Resistant Product Blast Mitigation Product Features 50 Heavy Wall TM IR medium stile has vertical stiles, top and 6-/ (65.) bottom rails 500 Heavy Wall TM IR wide stile
For installation assistance, contact SARGENT at DOORS SHOWN HERE SWING IN FOR ILLUSTRATION PURPOSES ONLY.
SARGENT Installation Instructions for LP8600 x LR8600 & 12-LP8600 x 12-LR8600 Series Low Profile Panic and Fire Exit Devices on Double Egress & Double Doors or LS8600 & 12-LS8600 Low Profile Exit Device
1006CLB 12VDC or 24VDC Fail secure 12V-45mA, 24V-25mA
1006 Series U.L. Fire Door Listed (10C) U.L. Burglary Resistant Listed (1034) Price Book Date - February 1, 2016 1006 COMPLETE PACS for LATCHBOLT LOCKS BLK 630 1006CLB 12VDC or 24VDC Fail secure 12V-45mA,
Product Guide. An Introduction to Hollow Metal Terminology and CURRIES Product. ASSA ABLOY, the global leader in door opening solutions
Product Guide An Introduction to Hollow Metal Terminology and CURRIES Product in door opening solutions CURRIES CURRIES Company of Mason City, Iowa is pleased to introduce you to Basic Hollow Metal Terminology.
STANDARD ENTRANCES TECHNICAL MANUAL
TECHNICAL MANUAL FEATURES FEATURES Narrow stile doors have a 2 1/2" top rail, 3 7/16" bottom rail, and 2 1/16" vertical stiles Medium stile doors have a 3 7/16" top rail, 6 7/16" bottom rail, and 3 7/16"
Adams rite. Deadbolts, Deadlocks & Hookbolts Series maximum security laminated deadlocks/hookbolts
1850 Series maximum security laminated deadlocks/hookbolts dams rite Deadbolts, Deadlocks & Hookbolts For single leaf doors where the gap between door and jamb is large ccepts standard mortise cylinder
Installation Instructions FE6800 Series Multi-Point Lock
Installation Instructions FE6800 Series Multi-Point Lock To view the QR Code video clips within this document, download a free mobile app and scan the QR Code with your mobile device. The complete video
DOOR SAVERS AVAILABLE IN STEEL, STAINLESS STEEL (32D), BRIGHT BRASS (3), BRONZE (10) AND OIL RUBBED BRONZE (10B)
SAVERS K1 : 9 High For cylindrical locksets 2-1/8 bore, 2-3/8 and 2-3/4 backsets K 188 2-3/8 1-3/8 K 184 2-3/8 1-3/4 K 148 2-3/4 1-3/8 K 144 2-3/4 1-3/4 K5 144 5 SPECIFY K3 : 9 High For cylindrical locksets
SECTION A4...IMPACT RATED ENTRANCES* 350 IR/500 IR ENTRANCES ENTRANCE HARDWARE OFFERINGS... A4/5
CONTENTS SECTION A4...IMPACT RATED ENTRANCES* Impact Rated Entrances CONTENTS PAGE FINISH GROUPS... A4/3 350 IR/500 IR ENTRANCES ENTRANCE HARDWARE OFFERINGS... A4/5 A4/1 350 IR/500 IR BASE DOOR DOOR CHASSIS...
Door Thickness For Cylindrical Door Locks with PB-CW PB-CW S-CW BZ-CW 612
Door Reinforcers Application Part No. Finish Overall Size Back Set Door Thickness For Cylindrical Door Locks with 2 1 8 2-PB-CW 605 hole, 9 height. 9 2 3 8 1 3 2-S-CW 630 3-BZ-CW 612 3-PB-CW 605 1 9 2
CONCEALED ROD CRASH BAR PR-7085 SERIES EXIT DEVICE ASSEMBLY DETAILS PR mm. 10mm. Lock cylinder. 10mm. Cross bar length (see note #8) Dogging
Floor line TITLE ASSEMLY DETAILS PR-7085 4:02 Hinge stile (inside) Lock stile (inside) Lock stile (outside) Drill 5mm (.20) and tap 1/4-20 (2) Drill 7mm (.266) holes (2) 9mm 12mm See note #6 160mm 9.5mm
7.01. Door Hardware & Accessories
7.01 Door 7.02 Mid-Panel Concealed Vertical Rod Panic First Choice 3100 Series Exit Device 7.03 P092 Mortised Butt Hinge Both leaves of this hinge are punched and countersunk so they can be mortised into
Senior Swing. Caution
*740132* 740132 2800 Overhead Concealed Series 9500 Surface Applied Series Senior Swing Installation Instructions Caution LCN Senior Swing The Senior Swing Power Operator System is a low energy product
55 Series. Exit device
55 Series Exit device Introduction The proper selection and application of exit hardware, in addition to safety, are major concerns to all responsible manufacturers. Exit devices are a critical part of
350/500 HEAVY WALL TM IR ENTRANCES 1
JUNE, 202 30/00 HEAVY WALL TM IR ENTRANCES FEATURES Blast Mitigation Product Features 30 medium stile has 3-/2" vertical stile, 3-/2" top and 6-/2" bottom rail 00 wide stile has " vertical stile, " top
Electrical Power Transfer Products
Manufacturing, Inc. Overhead Holders & Stops Hospital Push/Pull Latches Electro-Magnetic Door Holders Aluminum Continuous Geared Hinges Stainless Steel Continuous Pin & Barrel Hinges Stainless Steel Edge
DOOR REINFORCERS. For Cylindrical Door Locks with 2 1 / 8" hole, 9" height. 3-PB-CW /4" 9" 2 3 /4" 1 3 /8" S-CW
Published list prices, please login or contact a sales representative for your pricing. DON-JO Price Book, September 1, 2012 DOOR REINFORCERS Application Part No. Finish Overall Size Back Set Door Thickness
350/500 IR Entrances. Features
OCTOBER, 05 Features FEATURES Blast Mitigation Product 50 IR medium stile has vertical stiles, top and 6-/" (65.) bottom rails 500 IR wide stile has (7) vertical stile, (7) top and 6-/" (65.) bottom rail.
350/500 IR Entrances. Features
SEPTEMBER, 07 Features FEATURES Blast Mitigation Product 50 IR medium stile has vertical stiles, top and 6-/" (65.) bottom rails 500 IR wide stile has (7) vertical stile, (7) top and 6-/" (65.) bottom
Electric Strike Complete with LB option includes faceplates that accommodate J, K, KM or KD options
1006 Series U.L. Fire Door Listed (10C) U.L. Burglary Resistant Listed (103) 1006 Complete Pacs For Latchbolt Locks BLK 630 1006CLB 12VDC or 2VDC Fail secure 12V-5mA, 2V-25mA Electric Strike Complete with
Basic Technical Fundamentals of Builders Hardware Exit Devices
Copyright 2002, 2009, Sargent Manufacturing Company, an ASSA ABLOY Group company. All rights reserved. Table of Contents Page SARGENT History................................................... 1 What is
This section describes the design requirements and materials/products for door hardware.
Facilities Division Standards Section 08710 Door Hardware SUMMARY This section describes the design requirements and materials/products for door hardware. DESIGN REQUIREMENTS Coordinate with the McCarran
Technical Manual ITEM DESCRIPTION SECTION
Technical Manual DS ITEM DESCRIPTION SECTION Concealed Overhead Transom Closers TC-8800 Series Versatile Closer Technical Information 1:01 Assembly Details 1:02-1:09 TC-9600 Series Extended Spindle Closer
7130(F) Series Mortise Exit Devices Installation Instructions
7130(F) Series Mortise Exit Devices Installation Instructions Outside Trim Device is packed ready for any Yale 650F or 660F Series Trim. End Clamp (3) 8-32 x 5/16" PUFHMS End Cap (2) 1/4-20 x 1" PPHMS
Installation Instructions 50 (06-09) 1-15/32 15/32 21/32. 1/4-20 x 5/8" FHMS or #14 x 1/2" FHWS 1/16 1/4. Floor Plate
RIXSON ASSA ABLOY 3/4 Template Jamb 1/8 2- R. Max. 1-7/16 1-1/32 2-2-3/4 7/8 Dia. C L 1-1/4 Dia. Installation Instructions 50 (06-09) Finish Plate 340 TOP PIVOT Pivot Shown Engaged 9/16 1/16 1/4 1-15/32
ASSA ABLOY. Model W91 Overhead Concealed Wood Frame Installation Instructions IMPORTANT: BEFORE INSTALLING: TO DETERMINE HAND OF YOUR DOOR:
Model W91 Overhead Concealed s Wood Frame Installation Instructions *Butt or 3/4 Offset Pivot Hung, Multi Sized 1-3, 3-6 Non-Hold Open and Hold Open Models *Other means except 4-1/2" x 4-1/2" or 3/4" offset
1510(F) Surface Vertical Rod Exit Devices Installation Instructions
1510(F) Surface Vertical Rod Exit Devices Installation Instructions Top Mounting Plate (2) 1/4-20 x 3/4" PFHMS Rod Guide Top Rod Shim (2 Supplied) Strike Plate 791 Strike (3) 10-24 x 3/4" PFHMS or (3)
98/ Customer Service # Dogging Key (use to lock down pushbar)
911373-00 Rim Exit Device 98/99 Installation Instructions Dogging Key (use to lock down pushbar) Customer Service 1-877-671-7011 www.allegion.com/us Allegion 2014 Printed in U.S.A. 911373-00 Rev. 05/14-f
Table of Contents Holders & Stops
Copyright 2003, 2007, 2009-2018, Sargent Manufacturing Company, an ASSA ABLOY Group company. All rights reserved. Table of Contents Overview.... 1 General Information.... 2 Features and Details.... 3 590
7100(F) series. A conventional exit device for single swing doors or pairs of doors of metal, wood or composite construction.
Page Revised Electronically 12/12 7000 series architectural exit devices introduction Yale 7000 series exit devices deliver an unparalleled combination of durability, breadth of line, innovation and aesthetics.