Note: Use 1 Order Form per Buying Program (1 Week or 3 Week Contract) based on the availability of the product
|
|
- Marian Nelson
- 5 years ago
- Views:
Transcription
1 7 & 10 Line Parts Please Program Required Note: Use 1 Order Form per Buying Program (1 Week or 3 Week Contract) based on the availability of the product Ordering Form: 10 Line Parts 10 Line Parts - Description es Available Latches - Guarded - 2-3/4" BS 03, 04, 10, 10B, 32D Latches - Unguarded - 2-3/4" BS 03, 04, 10, 10B, 32D Inside and Outside Rose Scalp - L 26D 26D Inside and Outside Rose Scalp - G 26D 26D Inside Rose Assembly Standard * Outside Rose Assembly Standard * Ordering Form: 7 & 10 Line Parts 7 & 10 Line Parts - Description es Available Levers - I/S or O/S L design, Passage 26D 26D Levers - I/S or O/S L design, Cylinder, Emerg. 26D 26D Levers - I/S or O/S L design, Turn, 30 Prefix 26D 26D Levers - I/S or O/S B design, Passage 26D 26D Levers - I/S or O/S B design, Cylinder, Emerg. 26D 26D Levers - I/S or O/S B design, Turn, 30 Prefix 26D 26D Levers - I/S or O/S P design, Passage 26D 26D Levers - I/S or O/S P design, Cylinder, Emerg. 26D 26D Levers - I/S or O/S P design, Turn, 30 Prefix 26D 26D Screw Packs (28-) Standard * Screw Packs (Standard) Standard * Note: 30 Prefix - Lever to accept Schlage Cylinder (No cylinder provided) Note: The products on this page are not available with 24-Hour Express MS1
2 6, 7 & 8 Line Parts Please Program Required Ordering Form: 7 Line Parts 7 Line Parts - Description es Available Latches - Guarded - 2-3/4" BS 03, 04, 10, 10B, 32D Latches - Unguarded - 2-3/4" BS 03, 04, 10, 10B, 32D Rose Scalp (All functions) 03, 04, 10, 10B, 26D Inside Rose Body (all except 94, 94-2) Standard * Outside Rose Body (all except 93, 94, 94-2,15-3) Standard * /8 Door Mounting Kit Standard * Through-Bolt Mounting Pack Standard * Line Latch (2-3/8" guarded) 03, 10, 10B, 32D Line Latch (2-3/8" unguarded) 03, 10, 10B, 32D Ordering Form: 8 Line Parts 8 Line Parts - Description es Available #800 Strikes 03, 04, 10, 10B, 32D Latches - U15 Function 03, 04, 10, 10B, 32D Latches - G04, 05, 13, 15-3, 16, 17, 26, 30, 37, 39 03, 04, 10, 10B, 32D Latches - U65 Function 03, 04, 10, 10B, 32D Screw Packs Standard * Screw Packs 03, 04, 10, 10B, 26, 26D Screw Packs Standard * Ordering Form: 6 Line Parts 7 Line Parts - Description Note: The products on this page are not available with 24-Hour Express es Available 600 Strikes 03, 04, 10, 10B, 26D Latches - Guarded 03, 04, 10, 10B, 26D Latches - Unguarded 03, 04, 10, 10B, 26D Screw Packs Standard * Screw Packs Standard * Screw Packs Standard * MS2
3 6500 Line & 480 Series Accessories Please Program Required Note: Use 1 Order Form per Buying Program (24-Hour, 1 Week or 3 Week Contract) based on the availability of the product Order Form for 6500 Line Parts Lock Accessories - Description 24-Hour Express 1 Week & 3 Week #8 Combination Strike Screw (cylindrical lock mounting screw) Yes 26D Latch (2-3 8" guarded) ( - 03, 10B, 32D) Yes Latch (2-3 8" unguarded) ( - 03, 10B, 32D) Yes Strike ( : 03, 04, 10, 10B, 32D) Yes Yes Strike Box (for 8200 & 808 strikes) Yes * Order Form for 480 Series Deadbolt Parts 480 Line Parts - Description es Available Deadbolt Assembly - 2-3/8" BS 03, 04, 10, 10B, 32D Deadbolt Assembly - 2-3/4" BS 03, 04, 10, 10B, 32D Screw Packs , 04, 10, 10B, 26D Screw Packs - 485, 486, , 10, 10B, 26D Screw Packs , 10, 10B, 26D T-Turns-Inside - 485, , 26D T-Turns-Inside , 26D Dummy Plates-Outside , 10, 10B, 26D Note: ( ) Product or Part is not available in the Buying Program Note: The 480 Series Deadbolt Parts are not available with 24-Hour Express MS3
4 Mortise Lock Accessories Please Program Required Note: Use 1 Order Form per Buying Program (1 Week or 3 Week Contract) based on the availability of the product Ordering Form for 8200 Series Parts Lock Accessories - Description 24-Hour Express 1 Week & 3 Week #8-32 x 1/4" Mortise Outside Front Screws Yes 26D #12 Combination Latch Screw (mortise lock mounting screw) Yes 26D Spindle Kit (Dimpled - 1-3/4" door) Yes * Spindle Kit (Threaded - 1-3/4" door) Yes * Washer Yes * Lever Set Screw (B, J, L, P, W Levers) Yes * Lever Set Screw (A, E, F Levers) Yes * Machine Screw #8-32 x 5/8" Yes * 130KB Thumbturn ( 03, 10, 10B, 26, 26D, 32D) Yes 130W Thumbturn ( 03, 10, 10B, 26, 26D, 32D) Yes 184KB Emergency Release ( 03, 10, 10B, 26, 26D, 32D) Yes 184W Emergency Release ( 03, 10, 10B, 26, 26D, 32D) Yes Screw Pack 1-3/4" Dr (KE2/LE2 Trim) Yes * Lockbody Screw Pack (all trim) Yes * Mounting Post Yes * Standard Curve Lip Strike Yes 32D Cap Nut (Std O/S Lever) Yes * Wave Spring for Rose Yes * Trim Pack Kits- E, O, KW, L (7894) LN, LW - 94 Function Yes * Trim Pack Kits- KE1, KE2, LE1, LE2, KS, LS - 94 Function Yes * Trim Pack Kits- L(8294), WT - 94 Function Yes * Trim Pack Kits- L(8293), WT - 93 Function Yes * Trim Pack Kits- E, O, KW, L(7800), LN, LW Yes * Trim Pack Kits- KE1/LE1, KE2/LE2, KE3/LE3, KE4/LE4 Yes * Trim Pack Kits- L(8200), WT - All Yes * Screw Pack 1-3/4" Dr. (KE1/LE1, KE3/LE3, KW/LW Trim) Yes * Screw Pack - All Door Thickness (WT Trim) Yes * Screw Pack 1-3/4" Dr (FE trim) Yes * MS4
5 Door Closer Parts & 30 Series Through Bolts Please Program Required Note: Use 1 Order Form per Buying Program (24-Hour, 1 Week or 3 Week Contract) based on the availability of the product Ordering Form: Door Closer Accessories Door Closer Parts - Description es 24-Hour Express es Available 125P9 Parallel Arm Foot EB, EN, EAB 125PH9 Parallel Arm Foot EB, EN, EAB 125 P3 Arm Conversion Unit EB, EN, EAB, EP 125 P3A Arm Conversion Unit EB, EN, EAB, EP 125P4 Arm Conversion EB, EN, EAB, EP 125 P4A Arm Conversion Unit EB, EN, EAB, EP 351A Mounting Plate EB, EN EB, EN, EAB, EP 351B Mounting Plate EB, EN EB, EN, EAB, EP 351D Drop Bracket EB, EN EB, EN, EAB, EP 1431D Drop Bracket EB, EN EB, EN, EAB, EP 281D Mounting Plate EB, EN, EAB, EP Blade Stop Spacer Kit (P9, PH9, PF9) EB, EN, EAB, EP Blade Stop Spacer Kit (P10, PS, PSH, CPS, CPSH, PH10) EB, EN, EAB, EP 4TB Through-Bolt Pack EB, EN EB, EN, EAB, EP Paint Paint (One Color per 12 Unit Case) EB, EN, EAB, ED, EP Note: ( ) mean the Product or Part is not available in the buying Program MS5
6 80 Series Parts Please Program Required Note: Use 1 Order Form per Buying Program (24-Hour, 1 Week or 3 Week Contract) based on the availability of the product Ordering Form: Door Closer Parts Door Closer Parts - Description es 24-Hour Express es Available 809 Lexan Touchpad Kit Black Black Black 565 Metal End Cap Kit 32D 3, 10, 10B, 32D 665 Flush End Cap 32D 3, 10, 10B, 32D Flush End Cap 32D 3, 10, 10B, 32D " Rod Ext. Kit for 9700/2727/8700 (mfg prior 11/02) 3, 10, 10B, 32D 3, 10, 10B, 32D " Rod Ext. Kit for 9700/2727/8700 (mfg prior 11/02) 3, 10, 10B, 32D 3, 10, 10B, 32D Bottom Pullman Bolt Conversion Kit (8700) Standard * 644 Strike - Surface or Double door strike for 2828 & 8800 Black Nylon Black Nylon Black Nylon 649 Strike - Standard for , , , Black Nylon Black Nylon Black Nylon " Rod Ext. Kit for 8700 (mfg after 11/02) 03, 10, 10B, 32D 03, 10, 10B, 32D " Rod Ext. Kit for 8700 (mfg after 11/02) 03, 10, 10B, 32D 03, 10, 10B, 32D " Rod Ext. Kit for 8700 (mfg after 11/02) 03, 10, 10B, 32D 03, 10, 10B, 32D Series Spindle Kit - 1-3/4" Door Standard * Series Spindle Kit - 2" Door Standard * Series Spindle Kit - 2-1/4" Door Standard * Series Spindle Kit - 1-3/4" Door Standard * Series Spindle Kit - 2" Door Standard * Series Spindle Kit - 2-1/4" Door Standard * 815 Open Back Strike - LHR Black Nylon Black Nylon Black Nylon 815 Open Back Strike - RHR Black Nylon Black Nylon Black Nylon Cylinder Dogging Kits - w/wide Stile F size rail 3, 10, 10B, 32D Cylinder Dogging Kits - w/narrow Stile E, F size rail 3, 10, 10B, 32D Cylinder Dogging Kits - w/wide Stile G size rails 3, 10, 10B, 32D MS6
7 80 Series Parts Please Program Required Note: Use 1 Order Form per Buying Program (24-Hour, 1 Week or 3 Week Contract) based on the availability of the product Ordering Form: Door Closer Parts MS7 Door Closer Parts - Description es 24-Hour Express es Available 809 Lexan Touchpad Kit Black Black Black 565 Metal End Cap Kit 32D 3, 10, 10B, 32D 665 Flush End Cap 32D 3, 10, 10B, 32D Flush End Cap 32D 3, 10, 10B, 32D " Rod Ext. Kit for 9700/2727/8700 (mfg prior 11/02) 3, 10, 10B, 32D 3, 10, 10B, 32D " Rod Ext. Kit for 9700/2727/8700 (mfg prior 11/02) 3, 10, 10B, 32D 3, 10, 10B, 32D Bottom Pullman Bolt Conversion Kit (8700) Standard * 644 Strike - Surface or Double door strike for 2828 & 8800 Black Nylon Black Nylon Black Nylon 649 Strike - Standard for , , , Black Nylon Black Nylon Black Nylon " Rod Ext. Kit for 8700 (mfg after 11/02) 03, 10, 10B, 32D 03, 10, 10B, 32D " Rod Ext. Kit for 8700 (mfg after 11/02) 03, 10, 10B, 32D 03, 10, 10B, 32D " Rod Ext. Kit for 8700 (mfg after 11/02) 03, 10, 10B, 32D 03, 10, 10B, 32D Series Spindle Kit - 1-3/4" Door Standard * Series Spindle Kit - 2" Door Standard * Series Spindle Kit - 2-1/4" Door Standard * Series Spindle Kit - 1-3/4" Door Standard * Series Spindle Kit - 2" Door Standard * Series Spindle Kit - 2-1/4" Door Standard * 815 Open Back Strike - LHR Black Nylon Black Nylon Black Nylon 815 Open Back Strike - RHR Black Nylon Black Nylon Black Nylon Cylinder Dogging Kits - w/wide Stile F size rail 3, 10, 10B, 32D Cylinder Dogging Kits - w/narrow Stile E, F size rail 3, 10, 10B, 32D Cylinder Dogging Kits - w/wide Stile G size rails 3, 10, 10B, 32D Note: ( ) Product or Part is not available in the Buying Program
8 80 & 90 Series Parts Please Program Required Note: Use 1 Order Form per Buying Program, based on the availability of the product Ordering Form: 80 & 90 Series Parts Door Closer Parts - Description es 24-Hour Express es Available Retaining Clip Standard Standard * Wave Spring Washer Standard Standard * Chassis Cover 3, 10, 10B, 32D Chassis Cover 3, 10, 10B, 32D & 8900 Chassis Cover 3, 10, 10B, 32D Plastic End Cap Black Black Black ET Spindle Adapters (715-8) Standard Standard * Through-Bolt Pack - Rail & Chassis (86,87,88,89) 26D 3, 10, 10B, 26D Through-Bolt Pack - Cases & Guides (87) 26D 3, 10, 10B, 26D Through-Bolt Pack D 3, 10, 10B, 26D Hex Key Dogging Kit Standard Standard * Note: ( ) Product or Part is not available in the Buying Program Ordering Form: 30 Series Though-Bolt Packs 30 Series Though-Bolt Packs - Description es 24-Hour Express es Available TB Pack 10B or 26D 10B or 26D TB Pack 10B or 26D MS8 SARGENT Manufacturing Company 2007
9 DO NOT SEND A COVER P.O. DUPLICATED ORDERS CANNOT BE 80 & 90 Series Parts Please Program Required Note: Use 1 Order Form per Buying Program, based on the availability of the product Ordering Form: 80 & 90 Series Parts 90 Series Parts Parts - Description es 24-Hour Express es Available F Rail Assy - Wide 32D 3, 10, 10B, 32D G Rail Assy -Wide 32D 3, 10, 10B, 32D J Rail Assy -Wide 32D 3, 10, 10B, 32D F Rail Assy - Wide 32D 3, 10, 10B, 32D G Rail Assy - Wide 32D 3, 10, 10B, 32D J Rail Assy -Wide 32D 3, 10, 10B, 32D Screw Pack D 3, 10, 10B, 26D Hex Dogging Key Standard Standard * Rod Guides 3, 10, 10B, 32D 3, 10, 10B, 32D End Cap Screws (Cover) Standard Standard * Collar (for rail Lockdown) 26D 26D 26D Holdback Spring for Top Case Standard * 587 Shim Kit (8700) EN EN 589 Shim Kit (8800, , 8910 & Function) EN EN Bolt Spring & Bracket Assembly Standard Standard * 543 ANSI 161 Adapter Kit Standard * 544 ANSI 86 Adapter Kit Standard * Note: ( ) Product or Part is not available in the Buying Program MS9
Note: Use 1 Order Form per Buying Program (1 Week or 3 Week Contract) based on the availability of the product
7 & 10 Line Parts Please Program Required Note: Use 1 Order Form per Buying Program (1 Week or 3 Week Contract) based on the availability of the product Ordering Form: 10 Line Parts 10 Line Parts - Description
More information4600 Series Rim Narrow Stile Exit Device Installation Instructions I-ED01162
DEVICES COVERED IN THIS DOCUMENT: 4600 Series Rim Panic Narrow Stile Exit Device 4600 Series Rim Fire Narrow Stile Exit Device OVERVIEW Outside of Door RHR LHR Inside of Door APPLICATIONS 4950 BLADE STOP
More informationFor installation assistance, contact SARGENT at DOORS SHOWN HERE SWING IN FOR ILLUSTRATION PURPOSES ONLY.
SARGENT Installation Instructions for LP8600 x LR8600 & 12-LP8600 x 12-LR8600 Series Low Profile Panic and Fire Exit Devices on Double Egress & Double Doors or LS8600 & 12-LS8600 Low Profile Exit Device
More information33/35A Series. Devices covered by these instructions: Rim Exit Device. CD33/35A Rim Exit Device EL33/35A Rim Exit Device SS33/35A Rim Exit Device
911402-00 Rim Exit Device 33/35A Series Installation Instructions Devices covered by these instructions: 33/35A Rim Exit Device CD33/35A Rim Exit Device EL33/35A Rim Exit Device SS33/35A Rim Exit Device
More information1800 Series. Flatbar Exit Devices. An ASSA ABLOY Group brand
, BC V3L 3B1, BC V3A 8A7, BC V3B 7W3, BC V6G 2M6 1800 Series Flatbar Exit Devices An ASSA ABLOY Group brand , BC V3L 3B1, BC V3A 8A7, BC V3B 7W3, BC V6G 2M6 introduction Yale 1800 series exit devices are
More information98/9927. Devices covered by these instructions: Surface Vertical Rod Exit Device
911375-00 Surface Vertical Rod Exit Device 98/9927 Installation Instructions Devices covered by these instructions: 98/9927 Surface Vertical Rod Exit Device 98/9927-F (Fire) Surface Vertical Rod Exit Device
More informationExit Device 5820 SERIES GRADE 1 PUSH BAR SPECIFICATIONS HEAD COVER OPTIONS STRIKES APPLICATION.
Exit Device 5820 SERIES GRADE 1 PUSH BAR 5820F Fire-Rated Mortise Lock Exit Device 5820FSF Failsafe Electric Mortise Exit Device 5820FS Failsecure Electric Mortise Exit Device HEAD COVER OPTIONS HC-1 HC-2
More informationAn ASSA ABLOY Group brand Series. Flatbar Exit Devices
An ASSA ABLOY Group brand 1800 Series Flatbar Exit Devices Page revised electronically 7/16 1800 series grade 1 exit devices introduction Yale 1800 series exit devices are the ideal choice for economy
More information33/3527A. Devices covered by these instructions: 33/3527A-F (Fire) Surface Vertical Rod Exit Device
*911403-00* 911403-00 Surface Vertical Rod Exit Device 33/3527A Installation Instructions Devices covered by these instructions: 33/3527A Surface Vertical Rod Exit Device 33/3527A-F (Fire) Surface Vertical
More information33/3547A. Special tools needed: #10-24 tap Drill bits: #25, 5/16, 13/32, 1/2
911404-00 Concealed Vertical Rod Exit Device 33/3547A Installation Instructions Devices covered by these instructions: 33/3547A and 33/3548A Concealed Vertical Rod Exit Device 33/3547A-F and 33/3548A-F
More informationED1300/1300F SERIES CONCEALED VERTICAL ROD DEVICE INSTALLATION INSTRUCTIONS
ED1300/1300F SERIES CONCEALED VERTICAL ROD DEVICE INSTALLATION INSTRUCTIONS Ver.2 1300 SERIES CONCEALED VERTICAL ROD DEVICE Top Strike Latch Screws Strike Screws Release Plunger Top Latch Plunger Screws
More informationInstallation Instructions
VON DUPRIN Installation Instructions 98/9947WDC Concealed Vertical Rod Exit Device Wood Door Applications Devices covered by these instructions: 98/9947WDC Concealed Vertical Rod Device 98/9947WDC-F (Fire)
More information3000 Series Exit Devices Premier Product
00 000 Series Exit Devices Premier Product Certification & Compliance: ANSI/BHMA A56., Grade ANSI A7. Accessibility Code Underwriters Laboratories (UL and CUL) listed for accident hazard (panic) standard.
More informationD3976 RECESSED EXIT INSTALLATION INSTRUCTIONS
PACKAGE CONTENTS PRODUCT MUST BE INSTALLED ACCORDING TO ALL APPLICABLE BUILDING AND LIFE SAFETY CODES TEMPLATE INSTALLATION INSTRUCTIONS STRIKE HAND TOOL 5/32 HEX KEY ROD END CAPS EXIT DEVICE CRANK ARM
More informationNo. 059FL. No. 251FL. No. 260FL. No. 305RE. Etruscan Bronze. Florentine Brass. Siena Brass (D) All designs available in these finishes.
SINCE 1964 No. 059FL No. 251FL No. 260FL No. 305RE 2 Etruscan Bronze (ETR) Florentine Brass (D) Siena Brass (BAS) Venetian Nickel (BPS) All designs available in these finishes. No. 309RE No. 331FL No.
More information8900 Mortise Lock Exit Device 80 Series
8900 Mortise Lock Exit Device 8900 Series Mortise Lock Exit Device Specifications for 8900 Mortise Lock Exit 8900 Features Designed for standard width stile applications on wood and metal doors Concealed
More informationSECTION 9: PARTS Main
SECTION 9: PARTS Main 58 63 67 66 65 67 66 59 58 49 58 48 49 61A 61 64 62 55 50 35-3 34 35-1 57 56 41 42 151 51 50 33A 35-2 30A 30A-1 35 38 39 31 32 18 40 43 44 68 51 41 45 46 57 56 55 47 152 153 20 21
More informationED8000 Series. Pushpad Exit Devices Parts Manual
ED8000 Series Pushpad Exit Devices Parts Manual Table of Contents ED8200A Rim Exit Device...4 ED8200(B) Rim Exit Device...6 ED8400A Surface Vertical Rod Exit Device...8 ED8400 Surface Vertical Rod Exit
More informationDeadlatch 451 Series. Faceplates - Deadlatch. Strikes - Deadlatch. DeadLatch for Aluminum Stile Doors. Non-Handed. 451 NC0772 1¹ 8 Backset Deadlatch 4
Mortise Locks 185 Series Mortise Locks for Aluminum Stile Doors. Non-Handed. 185 NA0019 1¹ 8 Backset Deadbolt HB185 NB0123 Faceplates - Deadbolt FP-DB-F-NH-628 NE0000 Flat FP-DB-F-NH-313 NE0001 FP-DB-B-RH-628
More information7100(F) series. A conventional exit device for single swing doors or pairs of doors of metal, wood or composite construction.
Page Revised Electronically 12/12 7000 series architectural exit devices introduction Yale 7000 series exit devices deliver an unparalleled combination of durability, breadth of line, innovation and aesthetics.
More informationBravura. UL Listed Commercial Locksets FORGED. Designs from Great European Homes. Fall 2009
Designs from Great European Homes FORGED UL Listed Commercial Locksets Fall 2009 Many hotel, condo, apartment and office projects require locks with a UL fire rating. offers both tubular and mortise locks
More informationHardware Fitting Accessories Bolts
Lever action flush bolt With slide Width: 19 mm Stroke (a): 25 mm 1 Flush bolt 1 Set of fastening material With lever arm Width: 19 mm Stroke (a): 18 mm 1 Flush bolt 1 Set of fastening material Stainless
More information7130(F) Series Mortise Exit Devices Installation Instructions
7130(F) Series Mortise Exit Devices Installation Instructions Outside Trim Device is packed ready for any Yale 650F or 660F Series Trim. End Clamp (3) 8-32 x 5/16" PUFHMS End Cap (2) 1/4-20 x 1" PPHMS
More information7100(F) series. A conventional exit device for single swing doors or pairs of doors of metal, wood or composite construction.
Page Revised Electronically 12/12 7000 series architectural exit devices introduction Yale 7000 series exit devices deliver an unparalleled combination of durability, breadth of line, innovation and aesthetics.
More informationED3000 Series. Exit Device Parts Manual
ED3000 Series Exit Device Parts Manual Table of Contents Functions...3 ED3200 Series Rim Exit Device...4 ED3200A Series Rim Exit Device - Fire Rated...5 ED3400 Series Surface Vertical Rod Exit Device...-7
More informationAdams Rite. Standard & Heavy Duty Deadlatches Series Heavy Duty Deadlatch
Standard & Heavy Duty Deadlatches 4900 Series Heavy Duty Deadlatch Function: Flexibility of traffic control and installation is offered by the 4900 Series Deadlatches. A reverse turn of the key while bolt
More informationPRICE LIST 26. Service Parts February 1, 2016 rev
PRICE LIST 26 Service Parts February 1, 2016 rev. 7-15-16 CONTENTS Locks M9000 Series P3 D900 P10 C800 Series P11 D800 Series P17 CL700/CK700 Series P21 C500 Series P27 DB600 Series P29 C300/J300 Series
More informationSection B. DEADBOLT ENTRANCE SETS general information. Deadbolt & Mortise Entry Sets. A deadbolt entry set includes:
A deadbolt entry set includes: DEADBOLT ENTRANCE SETS general information two backplates two levers or knobs cylinder(s) inside turnpiece spindle latch, 28 retraction adjustable backset deadbolt T-strike
More information7100(F) series. A conventional exit device for single swing doors or pairs of doors of metal, wood or composite construction.
Page Revised Electronically 12/12 7000 series architectural exit devices introduction Yale 7000 series exit devices deliver an unparalleled combination of durability, breadth of line, innovation and aesthetics.
More informationAdams rite. Deadbolts, Deadlocks & Hookbolts Series maximum security laminated deadlocks/hookbolts
1850 Series maximum security laminated deadlocks/hookbolts dams rite Deadbolts, Deadlocks & Hookbolts For single leaf doors where the gap between door and jamb is large ccepts standard mortise cylinder
More informationHookbolt. Non Handed. Flat LH Bevel RH Bevel Radius Radius with Weather-strip. Radius Flat Bevel
Mortise Locks deadlatch Deadbolt Hookbolt Function: Deadbolt, Hookbolt, Deadlatch Backset: 31/32", 1-1/8", 1-1/2" Face Plate: 1"W x 6-7/8" L - Aluminum Case Dimensions: 7/8"W x 6"L x Depth specific to
More informationWorld s Leading Manufacturer Of Traffic Doors. Supplemental Instructions for the Single and Double Door Order Form
World s Leading Manufacturer Of Traffic Doors Supplemental Instructions for the Single and Double Door Order Form World s Leading Manufacturer Of Traffic Doors 2809 SW th Street Redmond, OR 97756 Phone:
More informationSARGENT 1331 DOOR CLOSER INSTALLATION INSTRUCTIONS WITH JUH (HOLD OPEN) ARMS
SARGENT 1331 DOOR CLOSER INSTALLATION INSTRUCTIONS WITH JUH (HOLD OPEN) ARMS Strength Adjustable From Size 1 Thru 6 CAUTION: FAILURE TO INSTALL OR ADJUST PROPERLY MAY RESULT IN INJURY OR DAMAGE. FOR ASSISTANCE,
More informationMORTISE LOCK INSTALLATION INSTRUCTIONS
MORTISE LOCK INSTALLATION INSTRUCTIONS INSPIRE TM ROSELESS DESIGNER TRIM FM 340 Rev. 10/18 TABLE OF CONTENTS: DOOR PREPARATION 1 ML2000 LOCK HANDING 2 FULL WORKING TRIM (STD) 3 HALF WORKING TRIM (M30)
More informationShim (2) Supplied. Strike Plate. (3) x 5/8" PFHMS or 10 x 1" PFHWS. Top Latch. (3) x 1/4" PRHMS. Latch Cover. (2) 8 x 3/8" PFH AB SMS
Installation Instructions ED5400 (A) Series ED5470 (B) Series Surface Vertical Rod Exit Devices Strike Angle Must Engage Strike Top Strike 10-24 PFHMS Top Bracket and Strike required for ED5470. Shim (2)
More information20 Series Exit Devices Accessories Mullions & Door Kits
20 Series Exit Devices Accessories s & Kits 980 Removable Bottom (2438mm) stock size Up to (3000mm) size 2-1/2" 1-1/2" 1-1/4" 3" 507 Adapter for Narrow Transom Bars Required when soffit is 1-1/4" to 2"
More informationCONCEALED VERTICAL ROD PANIC EXIT DEVICE
INSTALLATION INSTRUCTIONS CRL JACKSON 1085-1085P CONCEALED VERTICAL ROD PANIC EXIT DEVICE crlaurence.com Phone: (800) 421-6144 Fax: (866) 921-0531 crlaurence.com usalum.com crl-arch.com 11M0236 ORDER OF
More informationED5200(A) Series Rim Exit Devices
ED5200(A) Series Rim Exit Devices Installation Instructions (Single Doors or Pairs with Mullion) FM156 4/10 (617350602) For Metal, Composite and Wood Doors of Either Hand End Clamp (3) 8-32 x 5/16" Flat
More informationTable of Contents Holders & Stops
Copyright 2003, 2007, 2009-2018, Sargent Manufacturing Company, an ASSA ABLOY Group company. All rights reserved. Table of Contents Overview.... 1 General Information.... 2 Features and Details.... 3 590
More informationMortise Locks. European Mortise Locks Series EML Features Ordering String Functions Trim Sets European Profile Cylinders Specifications
2 Mortise Locks 2 c 3 4 6 9 22 24 European Mortise Locks Series EML Features Ordering String Functions Trim Sets European Profile Cylinders Specifications 2016 02 2 FSB North America European Mortise Lock
More informationOVERVIEW. Mounting Post (2 places) Cylinder Cam. Handing Pin
DEVICES COVERED IN THIS DOCUMENT: 46CE Cylinder Escutcheon Key locks and 46DT Dummy Trim Pull when dogged unlocks lever 46BE Blank Escutcheon Always operable 46NL Night Latch Key retracts latchbolt 46NK
More informationInstallation Instructions
for s TOC Table of Contents 1 Mortise Lock Handing Instructions.... 2 2 3 4 5 Mortise Lock Door Preparation & Installation... 3 HSS Trim Installation.... 5 Knob x Knob...6 Lever x Knob....7 Turn-Piece
More informationMortise Locks. Narrow Mortise Locks Series NML Features Ordering String Functions Trim Sets Cylinders Strikes Specifications
2 Mortise Locks 2 b 3 4 6 16 28 29 30 Narrow Mortise Locks Series NML Features Ordering String Functions Cylinders Strikes Specifications 2016 02 FSB North America Narrow Mortise Lock NML Series Quality
More information7000 Series Parts Manual. Architectural Exit Devices. An ASSA ABLOY Group brand
7000 Series Parts Manual Architectural Exit Devices An ASSA ABLOY Group brand table of contents Introduction Installation Notes... 3 How to Order Parts.... 3 Finish Chart.... 3 Exit Devices 7100(F) / 7200
More information55 Series Exit Device
55 Series Exit Device 55 Exit Devices Index Introduction........................................................................... 3 Exit Hardware Rim device............................................................................
More informationPUSH BAR EXIT DEVICES CROSS BAR EXIT DEVICES NARROW STILE EXIT DEVICES FEATURING LCWD STRIKES... 20
Flat Goods Section TABLE OF CONTENTS EXIT DEVICES PUSH BAR EXIT DEVICES N1500 Heavy Duty Rim Exit Device N1550 Rim Exit Device... 6 N1650 Fire Rated Heavy Duty Exit Device N1700(F) Vertical Rod Heavy Duty
More information4200 Series. Commercial Exit Device
4200 Series Commercial Exit Device 4200 SERIES COMMERCIAL EXIT DEVICE SUGGESTED ARCHITECTURAL SPECIFICATIONS RIM All exit devices shall be American Eagle 4200 Series rim or surface vertical rod devices.
More informationINSTALLATION INSTRUCTIONS FOR INSTALLING T-SERIES EXTRA HEAVY DUTY LEVER LOCKSET
HIGH EDGE 2 1/4"(57mm) 03079400070 INSTALLATION INSTRUCTIONS FOR INSTALLING T-SERIES EXTRA HEAVY DUTY LEVER LOCKSET IMPORTANT: THIS LOCK IS NON-HANDED. LOCK IS FACTORY PACKED PREADJUSTED FOR 1³ ₄" (45mm)
More informationIntroduction Exit Hardware Rim device... 4 Surface mounted vertical rod device... 6 Mortise lock device... 5
88 Exit Device INDEX Introduction... 3 Exit Hardware Rim device... 4 Surface mounted vertical rod device... 6 Mortise lock device... 5 Fire Exit Hardware Rim device... 7 Surface mounted vertical rod device...
More informationDoor Thickness For Cylindrical Door Locks with PB-CW PB-CW S-CW BZ-CW 612
Door Reinforcers Application Part No. Finish Overall Size Back Set Door Thickness For Cylindrical Door Locks with 2 1 8 2-PB-CW 605 hole, 9 height. 9 2 3 8 1 3 2-S-CW 630 3-BZ-CW 612 3-PB-CW 605 1 9 2
More information88 Series. Exit device
88 Series Exit device Introduction The proper selection and application of exit hardware, in addition to safety, are major concerns to all responsible manufacturers. Exit devices are a critical part of
More informationED5800 (A) Series. Installation Instructions. Concealed Vertical Rod. Exit Device WARNING
Strike Shim (2) Supplied Strike Plate (3) 10-24 x 3/4" PFHMS (6) 10-24 x 1/2" PFHMS Top Latch TopTube Concealed Vertical Rod Exit Device Important: For use with metal doors only. Device is packed ready
More informationMortise Locks 185 Series
Mortise Locks 185 Series Mortise Locks for Aluminum Stile Doors. Non-Handed. 185 NA0019 11/8 Backset Deadbolt HB185 NB0123 Faceplates - Deadbolt FP-DB-F-NH-628 NE0000 Flat FP-DB-F-NH-313 NE0001 FP-DB-B-RH-628
More informationDOOR REINFORCERS. For Cylindrical Door Locks with 2 1 / 8" hole, 9" height. 3-PB-CW /4" 9" 2 3 /4" 1 3 /8" S-CW
Published list prices, please login or contact a sales representative for your pricing. DON-JO Price Book, September 1, 2012 DOOR REINFORCERS Application Part No. Finish Overall Size Back Set Door Thickness
More informationEXIT DEVICE OPERATION FIRE DOOR LABELS, STRIKES AND FRAME SCREWS FOR INFORMATION CALL OR VISIT RITEDOOR.COM
RECORD & LABELS WHAT THIS OWNER'S CAN DO FOR YOU It explains exactly how The Rite Door operates. It explains periodic maintenance requirements necessary to assure reliable operation. It explains simple
More information1431 DOOR CLOSER WITH STANDARD DUTY ARMS (WITHOUT HOLD OPEN) INSTALLATION INSTRUCTIONS 1431 SERIES ADJUSTABLE FROM SIZE 1 THRU 6
1431 DOOR CLOSER WITH STANDARD DUTY ARMS (WITHOUT HOLD OPEN) INSTALLATION INSTRUCTIONS 1431 SERIES ADJUSTABLE FROM SIZE 1 THRU 6 FOR INSTALLATION ASSISTANCE, CALL SARGENT AT 1-800-727-5477 www.sargentlock.com
More information1530(F) Mortise Exit Devices Installation Instructions
1530(F) Mortise Exit Devices Installation Instructions Singe Doors or Pairs (2) 12-12-24 PFHUM/WS 798 Universal Strike Standard Device Package Devices are packed ready for application reinforced metal
More information2100 series exit devices. rugged reliability
rugged reliability Yale 2100 introduction It s no secret that the 2100 series flatbar exit device has a reputation as the right choice for meeting the rigors of demanding industry segments. The quality
More informationSteel Hawk 4300 Electrified Deadlatch (elatch)
STEEL HAWK 4300 ELECTRIFIED DEADLATCH (ELATCH) DA-1 STEEL HAWK 4300 ELECTRIFIED DEADLATCH (ELATCH) Steel Hawk 4300 Electrified Deadlatch (elatch) Operation Turn key, apply voltage, or operate handle or
More informationSECTION 9: PARTS Cabinet & Base
SECTION 9: PARTS 5 5-1 48 3 75 90 49 4 91 333 46 47 30 89 88 2 34 33 37 36 78 35 32 326 316 49 42 45 83 84V2 43 1 7 8 9 12 87 10 11 Cabinet & Base 31 17 20 40 39 136 41 135 85 86 8 28 26 18 19 21 19 370
More informationProduct Catalog. hardwaresuppliers.com
Product Catalog hardwaresuppliers.com 800-334-5625 2 TABLE OF CONTENTS 22 Series... Pages 3-4 33A & 35A Series... Page 5 88 Series... Pages 6-7 98 Series... Page 8 99 Series... Pages 9-11 X98/99 Series...
More informationDOOR TECHNOLOGY ORDER CATALOG SECTION SECURY Automatic Door Lock & Gripset Handle
DOOR TECHNOLOGY ORDER CATALOG SECTION 03.3 SECURY Automatic Door Lock & Gripset Handle Table of Contents 03.3 SECURY Automatic Door Lock & Gripset Handle SECURY Automatic Door Lock...03.3.5 Automatic
More informationRYOBI 10 in. (254 mm) TABLE SAW MODEL NO. BT3100 REPAIR SHEET
RYOBI 0 in. (4 mm) TABLE SAW MODEL NO. BT00 REPAIR SHEET FOR MITER TABLE ASSEMBLY, REFER TO FIGURE B FOR BLADE GUARD ASSEMBLY, REFER TO FIGURE E FOR RIP FENCE ASSEMBLY, REFER TO FIGURE C FOR MOTOR ASSEMBLY,
More information88 Series. Exit device
88 Series Exit device Introduction Your trusted solution Our brand s reputation, respect and legacy stem from that first exit device in 1908 and they continue because of the quality of Von Duprin products
More information55 Series. Exit device
55 Series Exit device Introduction The proper selection and application of exit hardware, in addition to safety, are major concerns to all responsible manufacturers. Exit devices are a critical part of
More informationIMPORTANT: Chuck guard MUST be installed before drill chuck!
IMPORTANT: Chuck guard MUST be installed before drill chuck! Model G7945/G7946 ***IMPORTANT UPDATE*** For Machines Mfg. Since December, 2012 and Owner's Manual Revised August, 2009 The following changes
More informationINSTALLATION INSTRUCTIONS CRL JACKSON
INSTALLATION INSTRUCTIONS CRL JACKSON 3185 MID-PANEL CONCEALED VERTICAL ROD PANIC EXIT DEVICE crlaurence.com Phone: (800) 421-6144 Fax: (866) 921-0531 crlaurence.com usalum.com crl-arch.com 11M0252 ORDER
More informationINTELLIKEY. Lock Identification GENIUS AT YOUR FINGERTIPS. 1 rev:
INTELLIKEY R GENIUS AT YOUR FINGERTIPS Lock Identification 1 rev: 073103 rev: 073103 2 Easy Lock Identification Mortise Lockset Shown at left is a standard mortise function lockset. The cylinder is normally
More informationCATALOG OF REPLACEMENT PARTS
CATALOG OF REPLACEMENT PARTS MODEL X13 SERIES SLICER FORM 43180 Rev. A (April 2013) F-43180 Rev. A (April 2013) - 2-2013 Table of Contents 5 ELECTRICAL COMPONENTS 7 RING GUARD AND CENTER PLATE 9 ARM ASSEMBLY
More informationInstallation Instructions for 45H & 47H Mortise Locks
Installation Instructions for 45H & 47H Mortise Locks Contents These installation instructions describe how to install your 45H & 47H Mortise Lock. Topics covered include: Finishing the preparation...
More informationABS-AMERICAN BUILDING SUPPLY, INC. Falcon
B Series - Dane Design Falcon With Schlage C Keyway With I.C. Less Core Door Thickness 1-3/8 to 2 standard. Backset 2-3/4 BS standard, available 2-3/8 BS. Specifications Trim has heavy duty springs for
More informationINSTRUCTIONS FOR 1431 Door Closer with Hold Open Arms 1431 SERIES ADJUSTABLE FROM SIZE 1 THRU 6
INSTRUCTIONS FOR Door Closer with Hold Open Arms SERIES ADJUSTABLE FROM SIZE THRU 6 FOR INSTALLATION ASSISTANCE CALL SARGENT AT -800-77-77 / www.sargentlock.com Installation Instructions based on Application
More informationFinish Hardware. Contents. Section 10
Section 10 Finish Hardware Contents 10.0.0 Introduction to contents 10.1.0 Door hinges (types and illustrations) 10.2.0 Locksets and latchset configurations and functions 10.3.0 Heavy-duty mortise cases,
More informationBEFORE STARTING INSTALLATION
VON DUPRIN Installation Instructions 22 Rim Device Devices covered by these instructions: 22 Rim Device 22-F Fire Exit Rim Device BEFORE STARTING INSTALLATION 1. Check hardware schedule for strikes, fasteners,
More informationSARGENT 1331 DOOR CLOSER INSTALLATION INSTRUCTIONS WITH JUO (JO & JP9) ARMS
SARGENT 1331 DOOR CLOSER INSTALLATION INSTRUCTIONS WITH JUO (JO & JP9) ARMS Strength Adjustable From Size 1 Thru 6 CAUTION: FAILURE TO INSTALL OR ADJUST PROPERLY MAY RESULT IN INJURY OR DAMAGE Auxiliary
More informationRYOBI 10 IN (254 MM) TABLE SAW MODEL NO. BT REPAIR SHEET
RYOBI 0 IN (2 MM) TABLE SAW MODEL NO. BT00- REPAIR SHEET 2 RYOBI 0 in. (2 mm) TABLE SAW - MODEL NO. BT00- FOR MITER TABLE ASSEMBLY, REFER TO FIGURE B FOR BLADE GUARD ASSEMBLY, REFER TO FIGURE E FOR RIP
More informationFEATURES. TownSteel Architectural Hardware MFG
TownSteel Architectural Hardware MFG TownSteel Inc. Quick Ship Guide Quick Ship Products on the road to you within 48 hours of receipt of purchase order and upon approval of credit. Terms and conditions
More informationNM SERIES. Extra Heavy Duty Mortise Locks Grade 1
NM SERIES Extra Heavy Duty Mortise Locks Grade 1 1 Auxiliary latchbolt Available with Interchangeable Core. Electrified Locks available upon request. 2 N SS TS JS GS 4 4 ¾ 5 ¼ 4 ¾ 2 9 /16 2 2 15 /32 2
More informationB-Series. Service manual
B-Series Service manual Contents 4 Introduction 4 Standard Features 4 Changes 5 Locks 6 Lock Assembly Drawing Index 7 Single Cylinder Deadlatch (Night Latch): B250 8 Double Cylinder Deadlatch : B252 9
More informationExit Devices 10 SERIES 1200 SERIES 20 SERIES
Exit Devices 10 SERIES 31-1085-4-7 Concealed Vertical Rod Device 340.82 340.82 31-1085P-L-7 CVR Paddle - Engraved "Push" - LHR 31-1085P-R-7 CVR Paddle - Engraved "Push" - RHR 328.55 328.55 31-1095-L-C-4
More informationInstallation Instructions ED4400, ED4400M & ED4400MA Series Surface Vertical Rod Exit Devices
Installation Instructions ED4400, ED4400M & ED4400MA Series Surface Vertical Rod Exit Devices In U.S.: Corbin Russwin, Inc. 225 Episcopal Road Berlin, CT 06037 USA www.corbinrusswin.com In Canada: Door
More informationFull line catalog. Locks, closers, and exits
Full line catalog Locks, closers, and exits Contents Cylindrical locks and deadbolts C1000 Series 4 C2000 Series 6 DB1000 Series 9 DB2000 Series 10 Surface door closers DCH1000 Series 12 DCM1000 Series
More informationSECTION 9: PARTS. Table. Spiral Cutterhead For Model G0452Z Cutterhead For Models G0452/P Model G0452/P/Z (Mfg.
SECTION 9: PARTS Table 17 18 19 87 86 21 262-3 262-1 262-2 27 28 29 30 22 23 24 35 36 37 38 262 25 26 2 13 Cutterhead For Models G0452/P 10 45 12 13 7 8 9 50A 6 11 31 14 15 16 12 13 81 82 83 84 32 85 33
More informationED5200S(A) Series ED5200S(A) Series x M107 Windstorm Series SecureBolt Exit Device
ED5200S(A) Series ED5200S(A) Series x M107 Windstorm Series SecureBolt Exit Device Installation Instructions FM532 3/11 (Single Doors or Pairs with Mullion) For Doors of Either Hand In U.S.: Corbin Russwin,
More informationRYOBI 10 in. TABLE SAW - MODEL NO. BT3000
FOR MITER TABLE ASSEMBLY, REFER TO FIGURE 0 RYOBI 0 in. TABLE SAW - MODEL NO. BT000 FIGURE 5: 0 in. TABLE SAW FOR BLADE GUARD ASSEMBLY, REFER TO FIGURE FOR RIP FENCE ASSEMBLY, REFER TO FIGURE FOR MOTOR
More informationNote: The dimensions of the Template are shown in inches. See attached page for the Metric Conversion Table for millimeters.
801 Avenida Acaso, Camarillo, Ca. 93012 (805) 494-0622 www.sdcsecurity.com E-mail: service@sdcsecurity.com These instructions are presented a in step by step sequence. Please read it through before installation.
More informationED1100 /1100F SERIES RIM EXIT DEVICE INSTALLATION INSTRUCTIONS
E1100 /1100F SERIES RIM EIT EVIE INSTALLATION INSTRUTIONS Ver.2 1100 SERIES RIM EIT EVIE End ap End ap Bracket End ap End ap Bracket over Plate Mechanism ase enter ase SPEIAL TOOLS REQUIRE Push Bar Hex
More information351 DOOR CLOSER WITH DOUBLE LEVER ARM (OP) INSTALLATION INSTRUCTIONS
2 351 DOOR CLOSER WITH DOUBLE LEVER ARM (OP) INSTALLATION INSTRUCTIONS Strength Adjustable From Size 1 Thru 6 CAUTION: FAILURE TO INSTALL OR ADJUST PROPERLY MAY RESULT IN INJURY OR DAMAGE Auxiliary door
More informationParts List for Type 1
1 422190430001 FENCE BODY 1 2 901010600677 CAP SCREW 2 3 904010331451 WASHER 3 4 901010600605 CAP SCREW 2 5 904010101604S STEEL WASHER 2 6 422040105002 REAR SLIDE BLOCK 1 7 905040714459 STEEL PIN 1 8 928010414118
More informationTubular Latches. 3 a. Heavy Duty Lever Latches Series HLL Features Ordering String Functions Dummy Mounts Trim Sets Specifications
3 Tubular Latches 3 a 3 4 6 8 12 14 Heavy Duty Lever Latches Series HLL Features Ordering String Functions Dummy Mounts Specifications 2016 02 2 FSB North America Heavy Duty Lever Latch HLL Series Quality
More informationSECTION 9: PARTS. Electrical REF PART # DESCRIPTION REF PART # DESCRIPTION
SECTION 9: PARTS Electrical 1 P4002001 START BUTTON 52 P4002052 CONTACTOR GSC1CJX4-D 110V 2 P4002002 INDICATOR LIGHT 53 P4002053 CONTACTOR JZC3-40D 110V 3 P4002003 JOG BUTTON 54 P4002054 FUSE HOLDER 4
More informationMedium HoneyBadger Chase Rack Installation Instructions
PREPARATION Medium HoneyBadger Chase Rack Installation Instructions 1. Disconnect the negative terminal on the battery. Park the vehicle on level ground and set the emergency brake. 2. We recommend reading
More informationMain Breakdown. Model G0531B/G0566B V2 (G0531B) 80V2-2
Main Breakdown 53 85-1 54 59 54 56 54 52 55 57 175 53 56 85 29 119-2 114 89 22 119-2 119 107 119-5 119-3 119-6 119-1 29 22 119-4 114 112 96 113 114 100 116 117 105 120 102 103 108 115 99 98 92 91 90 73
More information1.8. Panic Exit Devices. ED22 Series, ED2227 Series, ED22M Series, Accessories and Parts. Mechanics
1.8 Panic Exit Devices ED22 Series, ED2227 Series, ED22M Series, Accessories and Parts Mechanics OCTOBER 2014 Panic Exit Devices Kaba Panic Exit Devices provide a fast and convenient means of escape in
More informationMEETS ADA REQUIREMENTS!
PUSH / PULL LATCH HL-6 MEETS ADA REQUIREMENTS! HL-6/EO EXIT ONLY LATCH HL-6/EO Exit Only Latch for applications where only one side of door is used for exit or entry. Ideal for situations where the security
More informationSECTION 9: PARTS G7945/G7946
SECTION 9: PARTS G7945/G7946 Main Parts 22 53 25 26 31 139 32 32-1 60 38 59 38-1 119 35 37 31 38-3 124 125 45A-2 45A-4 45A-1 31 60 45A-3V2 120 121 62 28 28-1 28 27 34 50 51 39 41 126 137 36 46 40 63 33
More information8000 SERIES SERIES HEAVY-DUTY MODELS
GRADE 1 ARCHITECTURAL TYPE EXIT DEVICES 8000 SERIES SERIES HEAVY-DUTY MODELS FEATURES All devices are non-handed design Slight pressure on device touch bar will retract latch(s) for immediate exit Auxiliary
More informationMain Parts. -6- Model G0555LA35 (Mfd. Since 10/17) 30A V
60 49 50 76 41 65 66 44 46 43 42 47 51 63 58 64 59 48 62 16 61V2 50 51 55 56 57 70 49 69 64 55 56 43 57 167 154 41 40 8 22 30A 44 45 3 4 Main Parts 14 15 16 7 168 155 30 195 34 194 186 6 68 24 115 116
More informationMasonry Frames Interior/Exterior* Drywall Frames Interior**
Masonry Frames Interior/Exterior* Step your frame: Wire Masonry Anchor Combo Stud Anchor Existing Opening Anchor Hollow Metal 5-3/4" Standard* Frame Includes: 6 gauge - cold rolled steel - primed galvanneal
More information930 Series Mortice Exit Device
930 Series Mortice Exit Device BS EN 1125:1997+A1:2001 Classification Code 37601322B The Adams Rite 930 Series Mortice Exit Device is a life safety device which is designed to fit timber or hollow steel
More information