Visions 2000 Single Hung Tilt Window Parts Reference Catalog

Transcription

1 Visions 2000 Single Hung Tilt Window Parts Reference Catalog (Includes Parts and Information for Single Hung Tilt Picture and Basement and Miscellaneous Parts for Single Hung Tilt Oriel and Single Hung Tilt Eyebrow) # (Revised 12/02) Weather Shield Mfg., Inc. Medford, WI /

2 Single Hung Tilt Window Table of Contents Single Hung Tilt Window Parts Reference Catalog Guide Page 1 Single Hung Tilt Window Exploded View Page 2 Single Hung Tilt Window Horizontal/Vertical Mull Cross Sections Page 3 Single Hung Tilt Window Side View Weather Strip Placement Page 4 Basement Window Side View Weather Strip Placement Page 5 Single Hung Tilt and Basement Window Top View Weather Strip Placement Page 6 Single Hung Tilt Window Measurement Conversion Table Page 7 Single Hung Tilt Window How To Measure To Order Replacement Parts Page 8 Basement Window Measurement Conversion Table Page 10 Basement Window How To Measure To Order Replacement Parts Page 11 Single Hung Tilt Picture Window Measurement Conversion Table Page 13 Single Hung Tilt Picture Window How To Measure To Order Replacement Parts Page 14 Single Hung Tilt Window Specifications Page 16 Single Hung Tilt Window Glass and Sash Replacement Order Form Page 19 Single Hung Tilt Window Sash Balances Page 20 Single Hung Tilt, SH Tilt Picture, Basement, SH Tilt Oriel, and SH Tilt Eyebrow Sash, Glass, and Glazing Bead Page 21 Single Hung Tilt and SH Tilt Picture Window Glazing Options Page 23 Single Hung Tilt Window Grille/SDL Division Chart Page 24 Single Hung Tilt and Basement Window Grille/SDL Division Chart Page 25 Single Hung Tilt, SH Tilt Oriel, and SH Tilt Eyebrow Window Screen Parts Page 26 Single Hung Tilt Window Screen Parts Page 27 Single Hung Tilt Window Horizontal Replacement Parts Page 28 Single Hung Tilt Window Vertical Replacement Parts Page 30 Single Hung Tilt Window Miscellaneous Replacement Parts Page 31 Basement Window Hardware Parts Page 34 Single Hung Tilt Window Accessories Page 36

3 ENLARGED ENLARGED 9 1 Please Specify Product Option Numbers or Part Numbers When Ordering. PURPOSE This catalog is intended to assist you in identifying and ordering replacement parts. Single Hung Tilt Window Parts Reference Catalog Guide CATALOG FORMAT 1) Exploded View Page (Page 2) Shows part locations. PRODUCT NAME DRAWING TYPE Single Hung Window Exploded View Each part name is shown at the bottom of the page with a reference page number to turn to for specific information on that part. TYPICAL EXPLODED VIEW 2) Measuring Your Unit Pages (Pages 7-15) After the exploded view page is an informational page explaining how to measure your unit to order correct replacement part sizes. PART NAMES AND REFERENCE PAGES CATALOG PAGE AND DATE 1) Main Frame Page 4 10) Multi-Point Lock Keeper Page 17 12) Crank Handle Page 16 2) Sash Page 8 14) Bottom Hinge Page 15 3) Screen Insert Page 11 15) Top Hinge Page 15 4)Full Screen Plunger Page 11 5) Sash Glazing Bead Page 8 16) Sash Weather Strip Page 15 7) Multi-Point Lock Mounting Plate Page 17 17) Dual Insulated Glass Page 8 8) Multi-Point Lock Tie Bar Page 16 18) Vinyl Nailing Fin 1 (5/95) 3) Detailed Parts Information Pages (Pages 19-42) Pages are organized under four general categories: Horizontal, Vertical, Miscellaneous, Hardware, and Accessories Pages. Drawings of the parts and their descriptions are shown at the left of the page as they will show up on your order acknowledgement. Product options and part numbers are shown at the right for you to specify when ordering. At the end of some part descriptions are brackets with S or E followed by dates. This indicates when parts were started or ended in production. SIZE TO SPECIFY FOR ORDERING PARTS AND PART DESCRIPTIONS OPTION AND PART S TO USE FOR ORDERING STARTING AND ENDING DATES FOR PARTS {S } (WHEN ENDING DATE IS NOT SHOWN, PART IS STILL IN USE). S Vinyl VS Single-Hung Horzontal Parts (11.0) SPECIFY R.O. WIDTH WHEN ORDERING PARTS LISTED BELOW #1)VSSHAluminumDripCap Extrusion #8610-E {S , E XX-XX-XX} #5) VS SH 1 Inactive Meeting Rail (11.0) Extrusion #8345-V #7) VS SH Active Sash Interlock W/Fingerlift Punched (11.0) Extrusion #8216-V #11) VS SH Half Screen Support 6" (194) Extrusion #8343-V #13) VS SH Sill Cover Extrusion #8320-V-A #14) VS SH Rigid Nailing Fin Extrusion #2329-V {S } WHITE TAN WHITE TAN 1-WIDE 2-WIDE 3-WIDE 14' 8" PIECES (11.0) (11.0) (11.0) (194) WIDE (11.0) (3/95) WIDE (11.0) WHITE TAN 3-WIDE (11.0) WHITE TAN WHITE WHITE TAN TAN SIZE BY R.O. (11.0) 14' 6" PIECES (194) SPECIFIC LENGTH IN INCHES (194.5) S (194) C ) Configured Number Pages (Pages 19-42) Parts ordering system as of GLASS IDENTIFICATION S To identify when your unit was produced, look for the black ink numbers stamped on the aluminum spacer between the lites of glass. It will be near one of the four corners. See sketch at right. INSULATING GLASS QUESTIONS Contact your Customer Service Representative if you have any questions concerning how to use parts reference ALUMINUM SPACER catalogs. GLASS IDENTIFICATION S M (Revised 6/02)

4 Drawing Not To Scale Single Hung Tilt Window Exploded View 12 ENLARGED ENLARGED ) Main Frame Page 21 2) Active Sash Page 21 3) Inactive Meeting Rail Page 28 4) Inactive, Insul Glass Page 21 5) Active, Insul Glass Page 22 6) Half Screen Page 26 7) Screen Tab Page 26 8) Screen Tension Spring Page 26 9) Sill Cover Page 29 10) Vent Latch (Optional) Page 31 11) Universal Meeting Rail Block Page 33 12) Glazing Bead Page 22 13) Sash Pivot Pin Page 32 14) Latches Page 32 15) Thumb Button Page 32 16) Active Sash Interlock Page 28 17) Sash Lock Page 31 18) Sash Stop Page 31 20) Balances Page 20 21) Screen Support Page 27 22) Lock Slot Insert Page 31 Pile Weather Strip (Not Shown) Page 32 2 (Revised 12/02)

5 Drawings Not To Scale Single Hung Tilt Window Horizontal/Vertical Mull Cross Sections 25 Mull Reinforcement required on all Horizontal Mulls Typical Tight Horizontal Mull Must be requested when ordering Typical Tight Vertical Mull 23) Mull Reinforcement Bar Pages 29 & 30 24) Small Mull Cover Pages 29 & 30 25) Picture Cavity Cover Page 40 3 (Revised 12/02)

6 Drawing Not To Scale Single Hung Tilt Window Side View Weather Strip Placement A A A A).270 Height Pile Weather Strip w/center Fin 4 (Revised 12/02)

7 Drawing Not To Scale Basement Window Side View Weather Strip Placement Typical A A).270 Height Pile Weather Strip w/center Fin 5 (Revised 12/02)

8 Drawings Not To Scale Single Hung Tilt and Basement Window Top View Weather Strip Placement Single Hung Tilt A A A A Basement A A A A A).270 Height Pile Weather Strip w/center Fin 6 (Revised 12/02)

9 Single Hung Tilt Window Measurement Conversion Table Sash Width Height If you know Jamb Size and want to determine: Sash Size Glass Size Rough Daylight Screen Size Add or Subtract from Jamb Size: Top Inactive Bottom Active Top Inactive Bottom Active N/A 2-19/32 [66mm] 4 [102mm] 4-11/16 [119mm] N/A (Jamb Size 2) 1-1/32 [26mm] (JambSize 2) 3-1/8 [79mm] (JambSize 2) 3-1/8 [79mm] N/A + 1/2 [13mm] + 1/2 [13mm] Top Inactive Bottom Active 4-7/8 [124mm] 5-19/32 [142mm] (Jamb Size 2) 4-1/32 [102mm] (Jamb Size 2) 4-1/32 [102mm] N/A 3-7/8 [98mm] (Jamb Size 2) 2-1/16 [52mm] Sash Width Height If you know Sash Size and want to determine: Jamb Size Glass Size Rough Daylight Screen Size Add or Subtract from Sash Size: Top Inactive Bottom Active Top Inactive Bottom Active Top Inactive Bottom Active Top Inactive Bottom Active N/A /32 [66mm] N/A 2-3/32 [53mm] N/A + 3-3/32 [79mm] N/A 3 [76mm] N/A (Sash Size x 2) + 2-1/16 [52mm] N/A 2-3/32 [53mm] N/A (Sash Size x 2) + 2-9/16 [65mm] N/A 3 [76mm] N/A 1-9/32 [33mm] 1-1/32 [26mm] Sash Width Height If you know Glass Size and want to determine: Jamb Size Sash Size Rough Daylight Screen Size Add or Subtract from Glass Size: Top Inactive Bottom Active Top Inactive Bottom Active Top Inactive Bottom Active Top Inactive Bottom Active Top Inactive Bottom Active + 4 [102mm] /16 [119mm] N/A + 2-3/32 [53mm + 4-1/2 [114mm] + 5-3/16 [132mm] 7/8 [22mm] 29/32 [23mm] +1/8 [3mm] + 13/16 [21mm] (Glass Size x 2) + 6-1/4 [159mm] (Glass Size x 2) + 6-1/4 [159mm] N/A +2-3/32 [53mm (Glass Size x 2) + 6-3/4 [171mm] (Glass Size x 2) + 6-3/4 [171mm] 29/32 [23mm] 29/32 [23mm] + 1-1/16 [27mm] + 1-1/16 [27mm] Sash Width Height If you know Rough and want to determine: Jamb Size Sash Size Glass Size Daylight Screen Size Add or Subtract from Rough : NA 1/2 [13mm] 1/2 [13mm] Top Inactive Bottom Active Top Inactive Bottom Active Top Inactive Bottom Active N/A 3-3/32 [79mm] 4-1/2 [114mm] 5-3/16 [132mm] 5-3/8 [137mm] 6-3/32 [155mm] N/A (Rough Opg. 2) 1-9/32 [33mm] (Rough Opg. 2) 3-3/8 [86mm] (Rough Opg. 2) 3-3/8 [86mm] (Rough Opg. 2) 4-9/32 [109mm] (Rough Opg. 2) 4-9/32 [109mm] N/A 4-3/8 [111mm] (Rough Opg. 2) 2-5/16 [59mm] Sash Width Height If you know Daylight and want to determine: Jamb Size Sash Size Glass Size Rough Screen Size Add or Subtract from Daylight : Top Inactive Bottom Active Top Inactive Bottom Active Top Inactive Bottom Active Top Inactive Bottom Active Top Inactive Bottom Active + 4-7/8 [124mm] /32 [142mm] N/A +3 [76mm] + 7/8 [22mm] + 29/32 [23mm] + 5-3/8 [137mm] + 6-3/32 [155mm] +1 [25mm] /32 [44mm] (Daylight Opg. x 2) + 8-1/16 [205mm] (Daylight Opg. x 2) + 8-1/16 [205mm] N/A +3 [76mm] + 29/32 [23mm] + 29/32 [23mm] (Daylight Opg. x 2) + 8-9/16 [217mm] (Daylight Opg. x 2) + 8-9/16 [217mm] /32 [50mm] /32 [50mm] 7 (Revised 12/02)

10 Drawing Not To Scale Single Hung Tilt Window How To Measure To Order Replacement Parts 1/4 [6mm] 1 [25mm] 3 [76mm] 2-1/4 [57mm] 1-3/16 [30mm] Rough Height Jamb Height Active/Bottom Sash Glass Height Active/Bottom Sash Daylight Active/Bottom Sash Height Inactive Top Glass Height Inactive Top Daylight 1-3/16 [30mm] 1/4 [6mm] 1-1/4 [32mm] 8 (Revised 12/02)

11 Drawing Not To Scale Single Hung Tilt Window How To Measure To Order Replacement Parts Active/Bottom Sash Width Active/Bottom Sash Glass Width Active/Bottom Sash Daylight 1-3/16 [30mm] 1-1/4 [32mm] 3 [76mm] 1-3/16 [30mm] 2-1/4 [57mm] 1 [25mm] 1/4 [6mm] Inactive Top Daylight 1/4 [6mm] Inactive Top Glass Width Jamb Width Rough Width 9 (Revised 12/02)

12 Basement Window Measurement Conversion Table Width Height If you know Jamb Size and want to determine: Sash Size 2-43/64 [68mm] 2-47/64 [69mm] Add or Glass Size Subtract from 4-3/4 [121mm] 4-13/16 [122mm] Rough Jamb Size: +1/2 [13mm] +1/2 [13mm] Daylight 5-21/32 [144mm] 5-23/32 [145mm] Width Height If you know Sash Size and want to determine: Jamb Size +2-43/64 [68mm] +2-47/64 [69mm] Add or Glass Size Subtract from 2-5/64 [53mm] 2-5/64 [53mm] Rough Sash Size: +3-11/64 [81mm] +3-15/64 [82mm] Daylight 3 [76mm] Width 3 [76mm] Height If you know Glass Size and want to determine: Jamb Size +4-3/4 [121mm] +4-13/16 [122mm] Add or Sash Size Subtract from +2-5/64 [53mm] +2-5/64 [53mm] Rough Glass Size: +5-1/4 [133mm] +5-5/16 [135mm] Daylight 29/32 [23mm] 29/32 [23mm] Width Height If you know Rough and want to determine: Jamb Size Add or 1/2 [13mm] 1/2 [13mm] Sash Size Subtract from 3-11/64 [81mm] 3-15/64 [82mm] Rough Glass Size : 5-1/4 [133mm] 5-5/16 [135mm] Daylight 6-5/32 [156mm] 6-7/32 [158mm] Width Height If you know Daylight and want to determine: Jamb Size Add or +5-21/32 [144mm] +5-23/32 [145mm] Sash Size Subtract from +3 [76mm] +3 [76mm] Daylight Glass Size : +29/32 [23mm] +29/32 [23mm] Rough +6-5/32 [156mm] +6-7/32 [158mm] 10 (Revised 12/02)

13 Drawing Not To Scale Basement Window How To Measure To Order Replacement Parts 1/4 [6mm] 1 [25mm] 2-1/4 [57mm] 1-3/16 [30mm] Rough Height Jamb Height Daylight Height Glass Height Sash Height 2-13/16 [71mm] 1/4 [6mm] 1-1/4 [32mm] 11 (Revised 12/02)

14 Drawing Not To Scale Basement Window How To Measure To Order Replacement Parts Sash Width 1-3/16 [31mm] 1-1/4 [32mm] 2-1/4 [57mm] 1-3/16 [30mm] 1 [25mm] 1/4 [6mm] Daylight 2-13/16 [71mm] 1/4 [6mm] Jamb Width Rough Width 12 (Revised 12/02)

15 Single Hung Tilt Picture Window Measurement Conversion Table Width Height If you know Jamb Size and want to determine: Glass Size Add or 4 [102mm] 4 [102mm] Subtract Rough from Jamb Size: + 1/2 [13mm] + 1/2 [13mm] Daylight 4-7/8 [124mm] 4-7/8 [124mm] Width Height If you know Glass Size and want to determine: If you know Rough and want to determine: If you know Daylight and want to determine: Jamb Size Add or + 4 [102mm] + 4 [102mm] Subtract Rough from Glass Size: + 4-1/2 [114mm] + 4-1/2 [114mm] Daylight 7/8 [22mm] 7/8 [22mm] Width Height Jamb Size Add or Subtract 1/2 [13mm] 1/2 [13mm] from Glass Size Rough 4-1/2 [114mm] 4-1/2 [114mm] : Daylight 5-3/8 [137mm] 5-3/8 [137mm] Width Height Jamb Size Add or Subtract + 4-7/8 [124mm] + 4-7/8 [124mm] from Glass Size Daylight + 7/8 [22mm] + 7/8 [22mm] : Rough + 5-3/8 [137mm] + 5-3/8 [137mm] 13 (Revised 12/02)

16 Drawing Not To Scale Single Hung Tilt Picture Window How To Measure To Order Replacement Parts 3 [77mm] 2-1/4 [57mm] 1 [25mm] 1-3/16 [30mm] 1/4 [6mm] Rough Height Jamb Height Daylight Height 2-7/16 [62mm] 1-3/16 [31mm] 1/4 [6mm] 1-1/4 [32mm] 14 (Revised 12/02)

17 Drawing Not To Scale Single Hung Tilt Picture Window How To Measure To Order Replacement Parts 1-3/16 [31mm] 1-1/4 [32mm] 3 [77mm] 2-1/4 [57mm] 1-3/16 [30mm] 1 [30mm] 1/4 [6mm] Daylight Width 2-7/16 [62mm] 1/4 [6mm] Jamb Width Rough Width 15 (Revised 12/02)

18 Single Hung Tilt Window Specifications Unit Rough 18 x x x x x x x x x x x x x x x x x x x x x x 84 Sq. Ft. [cm 2 ] Clear 0.57 [530] 0.83 [771] 1.09 [1013] 1.35 [1254] 1.61 [1496] 1.87 [1737] 2.14 [1988] 2.40 [2230] 2.66 [2471] 2.92 [2713] 3.19 [2964] 0.84 [780] 1.22 [1133] 1.61 [1496] 1.99 [1849] 2.38 [2211] 2.76 [2564] 3.15 [2926] 3.54 [3289] 3.93 [3651] 4.31 [4004] 4.70 [4366] Clear Width Inches [mm] 12-5/8" [321mm] 12-5/8" [321mm] 12-5/8" [321mm] 12-5/8" [321mm] 12-5/8" [321mm] 12-5/8" [321mm] 12-5/8" [321mm] 12-5/8" [321mm] 12-5/8" [321mm] 12-5/8" [321mm] 12-5/8" [321mm] 18-5/8" [473mm] 18-5/8" [473mm] 18-5/8" [473mm] 18-5/8" [473mm] 18-5/8" [473mm] 18-5/8" [473mm] 18-5/8" [473mm] 18-5/8" [473mm] 18-5/8" [473mm] 18-5/8" [473mm] 18-5/8" [473mm] Height Inches [mm] 6-1/2" [165mm] 9-7/16" [240mm] 12-7/16" [316mm] 15-3/8" [391mm] 18-3/8" [467mm] 21-3/8" [543mm] 24-3/8" [619mm] 27-3/8" [695mm] 30-3/8" [772mm] 33-3/8" [848mm] 36-3/8" [924mm] 6-1/2" [165mm] 9-7/16" [240mm] 12-7/16" [316mm] 15-3/8" [391mm] 18-3/8" [467mm] 21-3/8" [543mm] 24-3/8" [619mm] 27-3/8" [695mm] 30-3/8" [772mm] 33-3/8" [848mm] 36-3/8" [924mm] Sq. Ft. [cm 2 ] Daylight 1.31 [1217] 1.82 [1691] 2.33 [2165] 2.85 [2648] 3.36 [3122] 3.87 [3595] 4.38 [4069] 4.89 [4543] 5.40 [5017] 5.91 [5491] 6.42 [5964] 1.96 [1821] 2.72 [2527] 3.48 [3233] 4.24 [3939] 5.00 [4645] 5.76 [5351] 6.52 [6057] 7.28 [6763] 8.04 [7469] 8.80 [8175] 9.56 [8882] Sq. Ft. [cm 2 ] Vent 0.57 [530] 0.83 [771] 1.09 [1013] 1.35 [1254] 1.61 [1496] 1.87 [1737] 2.14 [1988] 2.40 [2230] 2.66 [2471] 2.92 [2713] 3.19 [2964] 0.84 [780] 1.22 [1133] 1.61 [1496] 1.99 [1849] 2.38 [2211] 2.76 [2564] 3.15 [2926] 3.54 [3289] 3.93 [3651] 4.31 [4004] 4.70 [4366] Floor to Bottom of Clear Ht. b inches [mm] 58-11/16" [1491mm] 52-11/16" [1338mm] 46-11/16" [1186mm] 40-11/16" [1033mm] 34-11/16" [881mm] 28-11/16" [729mm] 22-11/16" [576mm] 16-11/16" [424mm] 10-11/16" [271mm] 4-11/16" [119mm] /16" [1491mm] 52-11/16" [1338mm] 46-11/16" [1186mm] 40-11/16" [1033mm] 34-11/16" [881mm] 28-11/16" [729mm] 22-11/16" [576mm] 16-11/16" [424mm] 10-11/16" [271mm] 4-11/16" [119mm] Sq. Ft. [cm 2 ] Overall Unit Area 2.86 [2657] 3.59 [3335] 4.31 [4004] 5.04 [4682] 5.77 [5361] 6.50 [6.39] 7.23 [6717] 7.96 [7395] 8.69 [8073] 9.42 [8751] [9430] 3.84 [3567] 4.81 [4469] 5.79 [5379] 6.77 [6290] 7.75 [7200] 8.73 [8110] 9.71 [9021] [9931] [10842] [11752] [12663] a b These sizes meet or exceed egress opening requirements per 1999 BOCA (Building Officials And Code Administrators) National Building Code and 1994 UBC (Uniform Building Code) minimum dimensions of 20 [508mm] clear opening width, 24 [610mm] clear opening height, 5.7 sq. ft. [5295 cm 2 ] clear opening and floor to bottom of clear opening not to exceed 44 [1118mm] in height. Verify local or state egress opening sizes with your local building inspector. Floor to bottom of clear opening dimensions are based on 79-3/4 [2026mm] frame height of Visions 2000 hinged and sliding patio doors. 16 (Revised 12/02)

19 Single Hung Tilt Window Specifications Unit Rough Sq. Ft. [cm 2 ] Clear 30 x [1496] 30 x [1970] 30 x [2443] 30 x [2917] 30 x [3400] 30 x [3874] 30 x [4348] 30 x [4822] 30 x 78 a 5.70 [5295] 30 x 84 a 6.22 [5779] 32 x [2137] 32 x [2648] 32 x [3159] 32 x [3670] 32 x [4190] 32 x [4701] 32 x [5212] 32 x 78 a 6.17 [5732] 32 x 84 a 6.72 [6243] Clear Width Inches [mm] 24-5/8" [625mm] 24-5/8" [625mm] 24-5/8" [625mm] 24-5/8" [625mm] 24-5/8" [625mm] 24-5/8" [625mm] 24-5/8" [625mm] 24-5/8" [625mm] 24-5/8" [625mm] 24-5/8" [625mm] 26-5/8" [676mm] 26-5/8" [676mm] 26-5/8" [676mm] 26-5/8" [676mm] 26-5/8" [676mm] 26-5/8" [676mm] 26-5/8" [676mm] 26-5/8" [676mm] 26-5/8" [676mm] Height Inches [mm] 9-7/16" [240mm] 12-7/16" [316mm] 15-3/8" [391mm] 18-3/8" [467mm] 21-3/8" [543mm] 24-3/8" [619mm] 27-3/8" [695mm] 30-3/8" [772mm] 33-3/8" [848mm] 36-3/8" [924mm] 12-7/16" [316mm] 15-3/8" [391mm] 18-3/8" [467mm] 21-3/8" [543mm] 24-3/8" [619mm] 27-3/8" [695mm] 30-3/8" [772mm] 33-3/8" [848mm] 36-3/8" [924mm] Sq. Ft. [cm 2 ] Daylight 3.61 [3354] 4.62 [4292] 5.63 [5230] 6.64 [6169] 7.65 [7107] 8.66 [8045] 9.67 [8984] [9922] [10870] [11808] 5.00 [4645] 6.10 [5667] 7.19 [6680] 8.28 [7692] 9.38 [8714] [9727] [10749] [11762] [12774] Sq. Ft. [cm 2 ] Vent 1.61 [1496] 2.12 [1970] 2.63 [2443] 3.14 [2917] 3.66 [3400] 4.17 [3874] 4.68 [4348] 5.19 [4822] 5.70 [5295] 6.22 [5779] 2.30 [2137] 2.85 [2648] 3.40 [3159] 3.95 [3670] 4.51 [4190] 5.06 [4701] 5.61 [5212] 6.17 [5732] 6.72 [6243] Floor to Bottom of Clear Ht. b inches [mm] 52-11/16" [1338mm] 46-11/16" [1186mm] 40-11/16" [1033mm] 34-11/16" [881mm] 28-11/16" [729mm] 22-11/16" [576mm] 16-11/16" [424mm] 10-11/16" [271mm] 4-11/16" [119mm] /16" [1186mm] 40-11/16" [1033mm] 34-11/16" [881mm] 28-11/16" [729mm] 22-11/16" [576mm] 16-11/16" [424mm] 10-11/16" [271mm] 4-11/16" [119mm] Sq. Ft. [cm 2 ] Overall Unit Area 6.04 [5611] 7.27 [6754] 8.50 [7897] 9.73 [9039] [10182] [11325] [12468] [13610] [14753] [15896] 7.77 [7219] 9.08 [8436] [9653] [10870] [12096] [13313] [14530] [15747] [16973] a b These sizes meet or exceed egress opening requirements per 1999 BOCA (Building Officials And Code Administrators) National Building Code and 1994 UBC (Uniform Building Code) minimum dimensions of 20 [508mm] clear opening width, 24 [610mm] clear opening height, 5.7 sq. ft. [5295 cm 2 ] clear opening and floor to bottom of clear opening not to exceed 44 [1118mm] in height. Verify local or state egress opening sizes with your local building inspector. Floor to bottom of clear opening dimensions are based on 79-3/4 [2026mm] frame height of Visions 2000 hinged and sliding patio doors. 17 (Revised 12/02)

20 Single Hung Tilt Window Specifications a b Unit Rough Sq. Ft. [cm 2 ] Clear x 36 [2453] x 42 [3038] x 48 [3633] x 54 [4227] x 60 [4812] 36 x 66 a 5.82 [5407] 36 x 72 a 6.46 [6002] 36 x 78 a 7.09 [6587] 36 x 84 a 7.73 [7181] 40 x 60 a 5.86 [5444] x 42 [3642] x 48 [3642] x 54 [5054] 42 x 60 a 6.20 [5760] 42 x 66 a 6.96 [6466] 42 x 72 a 7.72 [7172] 42 x 78 a 8.49 [7887] 42x 84 a 9.25 [8594] x 48 [5054] x 54 [5881] 48 x 60 a 7.21 [6698] 48 x 66 a 8.10 [7525] 48 x 72 a 8.99 [8352] 48x 78 a 9.88 [9179] 48x 84 a [9996] Clear Width Inches [mm] 30-5/8" [778mm] 30-5/8" [778mm] 30-5/8" [778mm] 30-5/8" [778mm] 30-5/8" [778mm] 30-5/8" [778mm] 30-5/8" [778mm] 30-5/8" [778mm] 30-5/8" [778mm] 34-5/8" [879mm] 36-5/8" [930mm] 36-5/8" [930mm] 36-5/8" [930mm] 36-5/8" [930mm] 36-5/8" [930mm] 36-5/8" [930mm] 36-5/8" [930mm] 36-5/8" [930mm] 42-5/8" [1083mm] 42-5/8" [1083mm] 42-5/8" [1083mm] 42-5/8" [1083mm] 42-5/8" [1083mm] 42-5/8" [1083mm] 42-5/8" [1083mm] Height Inches [mm] 12-7/16" [316mm] 15-3/8" [391mm] 18-3/8" [467mm] 21-3/8" [543mm] 24-3/8" [619mm] 27-3/8" [695mm] 30-3/8" [772mm] 33-3/8" [848mm] 36-3/8" [924mm] 24-3/8" [619mm] 15-3/8" [391mm] 18-3/8" [467mm] 21-3/8" [543mm] 24-3/8" [619mm] 27-3/8" [695mm] 30-3/8" [772mm] 33-3/8" [848mm] 36-3/8" [924mm] 18-3/8" [467mm] 21-3/8" [543mm] 24-3/8" [619mm] 27-3/8" [695mm] 30-3/8" [772mm] 33-3/8" [848mm] 36-3/8" [924mm] Sq. Ft. [cm 2 ] Daylight 5.76 [5351] 7.02 [6522] 8.28 [7692] 9.55 [8872] [10043] [11213] [12384] [13555] [14725] [11362] 8.42 [7822] 9.93 [9225] [10628] [12031] [13434] [14837] [16239] [17642] [10749] [12384] [14019] [15654] [17289] [18924] [20559] Sq. Ft. [cm 2 ] Vent 2.64 [2453] 3.27 [3038] 3.91 [3633] 4.55 [4227] 5.18 [4812] 5.82 [5407] 6.46 [6002] 7.09 [6587] 7.73 [7181] 5.86 [5444] 3.92 [3642] 4.68 [3642] 5.44 [5054] 6.20 [5760] 6.96 [6466] 7.72 [7172] 8.49 [7887] 9.25 [8594] 5.44 [5054] 6.33 [5881] 7.21 [6698] 8.10 [7525] 8.99 [8352] 9.88 [9179] [9996] Floor to Bottom of Clear Ht. b inches [mm] 46-11/16" [1186mm] 40-11/16" [1033mm] 34-11/16" [881mm] 28-11/16" [729mm] 22-11/16" [576mm] 16-11/16" [424mm] 10-11/16" [271mm] 4-11/16" [119mm] /16" [576mm] 40-11/16" [1033mm] 34-11/16" [881mm] 28-11/16" [729mm] 22-11/16" [576mm] 16-11/16" [424mm] 10-11/16" [271mm] 4-11/16" [119mm] /16" [881mm] 28-11/16" [729mm] 22-11/16" [576mm] 16-11/16" [424mm] 10-11/16" [271mm] 4-11/16" [119mm] Sq. Ft. [cm 2 ] Overall Unit Area 8.75 [8129] [9504] [10879] [12254] [13629] [15004] [16379] [17754] [19129] [15162] [11111] [12718] [14326] [15933] [17540] [19147] [20755] [22352] [14558] [16397] [18237] [20076] [21916] [23746] [25585] These sizes meet or exceed egress opening requirements per 1999 BOCA (Building Officials And Code Administrators) National Building Code and 1994 UBC (Uniform Building Code) minimum dimensions of 20 [508mm] clear opening width, 24 [610mm] clear opening height, 5.7 sq. ft. [5295 cm 2 ] clear opening and floor to bottom of clear opening not to exceed 44 [1118mm] in height. Verify local or state egress opening sizes with your local building inspector. Floor to bottom of clear opening dimensions are based on 79-3/4 [2026mm] frame height of Visions 2000 hinged and sliding patio doors. 18 (Revised 12/02)

21 Single Hung Tilt, SH Tilt Picture, Basement, SH Tilt Oriel, and SH Tilt Eyebrow Window Glass and Sash Replacement Order Form To Order Replacement Sash, Specify The Following: 1) Manufacturing Date / Glass Code (See Page 1): 2) Rough Size (See Pages 7-13): Width: Height: 3) Glazing Option: 13/16 Insul 4) Spacer Color: Silver Anodized Bronze Anodized 5) Glass Type: Clear Low E Special Glass: (Obscure, Tinted, Patterned, Etc.) SDL Configuration: Wide: High: (Example: Wide: 2 High: 3) 7/8 Bar Grille in Airspace and Configuration: Grille Type: 5/8 Rectangular Wide: High: 11/16 Sculptured Rectangular Wide: High: 15/16 Sculptured Rectangular Wide: High: Color: (See Examples Below) White 02 Cameo Gas: 5/8 11/16 15/16 Argon / Krypton / SF6 (Circle Which One Applies) 6) Sash Locks: 1 Lock 2 Locks NOTE: If ordering glass only, stop here. 7) Exterior/Interior Color: White 02 TN Cameo 19 (Revised 12/02)

22 * 21HD Single Hung Tilt Window Sash Balances Drawings Not To Scale Vinyl Window Sash Balances Locate Identification Number as shown in Diagram Below (Partial Listing Shown) NOTE: Cameo units use white balances. WHITE TAN BALANCE CODE LT PART *REG PART HD PART TG PART LT PART *REG PART HD PART TG PART BALANCE CODE IDENTIFICATION "A" DETAIL "A" * Regular sash balances may show numerical value only. 20 (Revised 12/02)

23 Single Hung Tilt, SH Tilt Picture, Basement, SH Tilt Oriel, and SH Tilt Eyebrow Window Sash, Glass, and Glazing Bead Specify R.O. width and height when ordering parts listed below. See Pages 7-15 for R.O. Measurements. #1) Frame Only SH TILT SH TILT ORIEL SH TILT EYEBROW SH TILT PICTURE {S 4-02) BASEMENT {S 4-02) White C FMO C FMO C FMO C FMO C FMO Cameo #2) Active (Bottom) Sash SH TILT AND SH TILT EYEBROW SH TILT ORIEL BASEMENT White C RS2 C RS2 C RS1 Cameo NOTE: Specify Type of Glass i.e. Clear, Low E, Bronze, etc. and 1 or 2 Sash Locks #4) Inactive (Top) Glass Glazing Bead Set is ordered separately. SH TILT SH TILT PICTURE SH TILT ORIEL SH TILT EYEBROW White C GL1 C GL1 C GL1 C GL1 Cameo NOTE: Specify Type of Glass i.e. Clear, Low E, Bronze, etc. 21 (Revised 12/02)

24 Single Hung Tilt, SH Tilt Picture, Basement, SH Tilt Oriel, and SH Tilt Eyebrow Window Sash, Glass, and Glazing Bead Specify R.O. width and height when ordering parts listed below. See Pages 7-15 for R.O. Measurements. #5) Active Glass Extrusion #8369-V SH TILT AND SH TILT EYEBROW SH TILT ORIEL BASEMENT White C GL2 C GL2 C GL1 Cameo NOTE: Specify Type of Glass i.e. Clear, Low E, Bronze, etc. Glazing Bead Set is ordered separately. #12) Glazing Bead Extrusion #8369-V S {S 4-02} White C Cameo GLAZING BEAD SET {S 4-02} White 02 C06000-GBS Cameo 22 (Revised 12/02)

25 Drawings Not To Scale SH Tilt and SH Tilt Picture Window Glazing Options Single Hung Tilt and Basement Single Hung Tilt Picture 13/16 Insul 13/16 Insul with 7/8 SDL 13/16 Insul 13/16 Insul with 7/8 SDL 23 (Revised 12/02)

26 Single Hung Tilt Window Grille/SDL Division Chart Unit Rough Standard Rectangle Grille/SDL Divisions Top Sash / Bottom Sash SINGLE-HUNG 18 x 24 2W1H / 2W1H 18 x 30 2W1H / 2W1H 18 x 36 2W2H / 2W2H 18 x 42 2W2H / 2W2H 18 x 48 2W2H / 2W2H 18 x 54 2W2H / 2W2H 18 x 60 2W2H / 2W2H 18 x 66 2W3H / 2W3H 18 x 72 2W3H / 2W3H 18 x 78 2W4H / 2W4H 18 x 84 2W4H / 2W4H 24 x 24 2W1H / 2W1H 24 x 30 2W1H / 2W1H 24 x 36 2W2H / 2W2H 24 x 42 2W2H / 2W2H 24 x 48 2W2H / 2W2H 24 x 54 2W2H / 2W2H 24 x 60 2W2H / 2W2H 24 x 66 2W3H / 2W3H 24 x 72 2W3H / 2W3H 24 x 78 2W4H / 2W4H 24 x 84 2W4H / 2W4H 30 x 30 3W1H / 3W1H 30 x 36 3W2H / 3W2H 30 x 42 3W2H / 3W2H 30 x 48 3W2H / 3W2H 30 x 54 3W2H / 3W2H 30 x 60 3W2H / 3W2H 30 x 66 3W3H / 3W3H 30 x 72 3W3H / 3W3H 30 x 78 3W4H / 3W4H 30 x 84 3W4H / 3W4H 32 x 36 3W2H / 3W2H 32 x 42 3W2H / 3W2H 32 x 48 3W2H / 3W2H 32 x 54 3W2H / 3W2H 32 x 60 3W2H / 3W2H 32 x 66 3W3H / 3W3H 32 x 72 3W3H / 3W3H 32 x 78 3W4H / 3W4H 32 x 84 3W4H / 3W4H 36 x 36 3W2H / 3W2H 36 x 42 3W2H / 3W2H 36 x 48 3W2H / 3W2H 36 x 54 3W2H / 3W2H 36 x 60 3W2H / 3W2H 36 x 66 3W3H / 3W3H 36 x 72 3W3H / 3W3H 36 x 78 3W4H / 3W4H 36 x 84 3W4H / 3W4H 24 (Revised 12/02)

27 Single Hung Tilt Window Grille/SDL Division Chart Unit Rough Standard Rectangle Grille/SDL Divisions Top Sash / Bottom Sash SINGLE HUNG 40 x 60 3W2H / 3W2H 42 x 42 3W2H / 3W2H 42 x 48 3W2H / 3W2H 42 x 54 3W2H / 3W2H 42 x 60 3W2H / 3W2H 42 x 66 3W3H / 3W3H 42 x 72 3W3H / 3W3H 42 x 78 3W4H / 3W4H 42 x 84 3W4H / 3W4H 48 x 48 4W2H / 4W2H 48 x 54 4W2H / 4W2H 48 x 60 4W2H / 4W2H 48 x 66 4W3H / 4W3H 48 x 72 4W3H / 4W3H 48 x 78 4W4H / 4W4H 48 x 84 4W4H / 4W4H SINGLE HUNG ORIEL 18 X 32/16 2W3H / 2W1H 18 X 16/32 2W1H / 2W3H 18 X 28/20 2W2H / 2W2H 18 X 20/28 2W2H / 2W2H 18 X 40/20 2W3H / 2W2H 18 X 20/40 2W2H / 2W3H 18 X 36/24 2W3H / 2W2H 18 X 24/36 2W2H / 2W3H 18 X 48/24 2W4H / 2W2H 18 X 42/30 2W3H / 2W3H 18 X 30/42 2W3H / 2W3H 18 X 48/36 2W4H / 2W3H 24 X 32/16 2W3H / 2W1H 24 X 16/32 2W1H / 2W3H 24 X 28/20 2W2H / 2W2H 24 X 20/28 2W2H / 2W2H 24 X 40/20 2W3H / 2W2H 24 X 20/40 2W2H / 2W3H 24 X 36/24 2W3H / 2W2H 24 X 24/36 2W2H / 2W3H 24 X 48/24 2W4H / 2W2H 24 X 42/30 2W3H / 2W3H 24 X 30/42 2W3H / 2W3H 24 X 48/36 2W4H / 2W3H BASEMENT Unit Rough Standard Rectangle Grille/SDL Divisions 32 X 15 3W1H 32 X 19 3W2H 32 X 23 3W2H * Part may be ordered by specifying Rough or Specific Length in Inches. 25 (Revised 12/02)

28 Single Hung Tilt, SH Tilt Oriel, SH Tilt Eyebrow Window Screen Parts #6) Half Screen 6 PIECE {S 4-02} White C Cameo #7) Screen Tabs - Gray #8) Screen Tension Spring #H333-1 End Loaded Screen Corner Key P100 3/8 White Cameo (Revised 12/02)

29 Single Hung Tilt Window Screen Parts #21) Half Screen Support 6 Extrusion #8343-V 6 PIECE {S 4-02} White C Cameo Screen Spline Extrusion #1018-V {S 4-02} C * Part may be ordered by specifying Rough or Specific Length in Inches. 27 (Revised 12/02)

30 Single Hung Tilt Window Horizontal Replacement Parts Specify R.O. width or height when ordering parts listed below. #3) 1 Piece Inactive Meeting Rail Extrusion #8345-V White 02 Cameo {S 4-02} C Active Sash Interlock with Fingerlift Punched {E 3-97} Extrusion #8346-V Replace with Extrusion #8252-V #16) Active Sash Interlock with Fingerlift Punched Extrusion #8252-V {S 4-02} White C Cameo #25) Vinyl Drip Cap {S } Extrusion #4012-V 5 PIECE {S 4-02} White C Cameo A-Bay Bow Drip Cap No Lip for Sill Extrusion #4012-V White C Cameo * Part may be ordered by specifying Rough or Specific Length in Inches. 28 (Revised 12/02)

31 Single Hung Tilt Window Horizontal Replacement Parts Specify R.O. width or height when ordering parts listed below. #9) Vinyl Sill Cover Extrusion #8320-V White 02 Cameo {S 4-02} C #23) Mull Reinforcement Bar Aluminum {S 6-96} Extrusion #8603 {S 4-02} C #24) Small Mull Cover Extrusion #2322-V NOTE: 2 required per mull. White Cameo C Vinyl Brickmould Extrusion #1084 White C Cameo * Part may be ordered by specifying Rough or Specific Length in Inches. 29 (Revised 12/02)

32 Single Hung Tilt Window Vertical Replacement Parts Specify R.O. height when ordering parts listed below. #23) Mull Reinforcement Bar Aluminum {S 6-96} Extrusion #8603 {S 4-02} C #24) Small Mull Cover Extrusion #2322-V NOTE: 2 required per mull. White Cameo C Vinyl Brickmould Extrusion #1084 White C Cameo * Part may be ordered by specifying Rough or Specific Length in Inches. 30 (Revised 12/02)

33 Single Hung Tilt Window Miscellaneous Replacement Parts When ordering parts, view the unit from the Exterior. #10) Vent Latch {S 2-94} White Cameo #17) Sash Lock RIGHT LEFT Right Left White NOTE: A Right Lock is used on all one (1) lock units. Cameo #18) Sash Stop Extrusion #8364-V 2-5/8 PIECE {S 4-02} White C Cameo #22) Lock Slot Insert {S 10-94} White Cameo Intermediate Sash Stop {S 1-92, E 2-94} White Cameo N/A * Part may be ordered by specifying Length in Inches. 31 (Revised 12/02)

34 When ordering parts, view the unit from the Exterior. Single Hung Tilt Window Miscellaneous Replacement Parts #13) Sash Pivot Pin (Left ; Right ) Left Right LEFT RIGHT NOTE: Pivot pins are viewed from the exterior. Pivot pins {11-96} are interchangeable with windows manufactured prior to this date. #14) Latches LEFT RIGHT Left White Right Cameo NOTE: Latches are viewed from the exterior. #15) Thumb Button White Cameo Pile Weather Strip with Center Fin A) WHWF {S 4-02} C Knife Point Locking Cam {S 3-93} White Black Jamb Jack II Adjustment Screw * Part may be ordered by specifying Rough or Specific Length in Inches. 32 (Revised 12/02)

35 When ordering parts, view the unit from the Exterior. #11) Universal Meeting Rail Block U Single Hung Tilt Window Miscellaneous Replacement Parts Sill Inside Insect Barrier (1 x 11/16 x 1 ) Sill Outside Insect Barrier (9/16 x 5/16 x 2 ) Integral Sill Nailing Fin Mulling Gasket {S 5-95} * Part may be ordered by specifying Rough or Specific Length in Inches. 33 (Revised 12/02)

36 Basement Window Hardware Parts ) Left Frame and Window Bracket Page 35 27) Right Frame and Window Bracket Page 35 28) Lever Latch and Latch Plate Page 35 * Part may be ordered by specifying Rough or Specific Length in Inches. 34 (Revised 12/02)

37 Basement Window Hardware Parts #26) Left Frame Bracket Left Window Bracket Window Bracket Frame Bracket #27) Right Frame Bracket Right Window Bracket Frame Bracket Window Bracket #28) Lever Latch Latch Plate Lever Latch Latch Plate Hardware Set Single Unit (Includes #26, 27, & 28) #26) Left Frame and Left Window Brackets #27) Right Frame and Right Window Brackets #28) Lever Latch and Latch Plate White Cameo * Part may be ordered by specifying Rough or Specific Length in Inches. 35 (Revised 12/02)

38 Single Hung Tilt Window Accessories 1/2-5/8 Jamb Extension/Drywall Return Extrusion #2157-V White C Cameo /4-7/8 Jamb Extension/Drywall Return Extrusion #2330-V White C Cameo Mull Cover Cap {E 10-98) Extrusion #1016 White N/A C Cameo N/A Universal Mull Cover Extrusion #2325 White C Cameo * Part may be ordered by specifying Rough or Specific Length in Inches. 36 (Revised 12/02)

39 Single Hung Tilt Window Accessories Sill Extender (All Products) Extrusion #1041-V White C Cameo Retro Z-Casing (All Products) Extrusion #1044-V White C Cameo VS 3-1/4 Frame Pocket Filler Extrusion #8348-V White C Cameo Head Expander - Wood Replacement with Foam Filler Extrusion #8349-V White 02 Cameo {S 4-02} C * Part may be ordered by specifying Rough or Specific Length in Inches. 37 (Revised 12/02)

40 Single Hung Tilt Window Accessories Corner Gusset Jamb Extension Clip Extrusion #1089-V 69 PIECE {S 4-02} C Pine Jamb Extension w/clip {S 4-02} C Cellular PVC Jamb Extension w/clip {S 4-02} C * Part may be ordered by specifying Rough or Specific Length in Inches. 38 (Revised 12/02)

41 Single Hung Tilt Window Accessories Vinyl Drywall Jamb Extension Extrusion #1065 {S 4-02} White C Cameo J-Channel without Nail Fin Extrusion #1060 White C Cameo J-Channel with Nail Fin Extrusion #1061 White C Cameo * Part may be ordered by specifying Rough or Specific Length in Inches. 39 (Revised 12/02)

42 Single Hung Tilt Window Accessories #25) Picture Cavity Cover Extrusion #8378-V White C Cameo Bow Mull Cover Extrusion #2323-V White C Cameo A-Bay Exterior Mull Cover {S 11-98} Extrusion #1087-V White C Cameo A-Bay Exterior Mull Cover {S 11-98} Extrusion #1088-V White C Cameo * Part may be ordered by specifying Rough or Specific Length in Inches. 40 (Revised 12/02)

43 Single Hung Tilt Window Accessories Wide Bow Jamb Return Extrusion # PIECE {S 4-02} White C Cameo A-Bay Interior Jamb Return Extrusion # PIECE {S 4-02} White C Cameo A-Bay Interior Jamb Return Extrusion # PIECE {S 4-02} White C Cameo /16 Stucco Adapter Extrusion #1063-V White C Cameo * Part may be ordered by specifying Rough or Specific Length in Inches. 41 (Revised 12/02)

44 Single Hung Tilt Window Accessories Double Face Glazing Tape (White) 1/16 x 1/4 x Installation Clips SIZE 5-1/ / * Part may be ordered by specifying Rough or Specific Length in Inches. 42 (Revised 12/02)