SITELINE CLAD-WOOD WINDOW DOUBLE-HUNG TABLE OF CONTENTS

Transcription

1 TABLE OF CONTENTS 1

2 GENERAL INFORMATION Dimensional Windows Siteline Clad Double-Hung windows may be specified as "dimensional", by adjusting the desired rough opening width or height. Siteline Clad Double-Hung windows feature fully operating upper and lower sash. Counterbalancing is achieved with block and tackle spring extension systems hidden in weatherable PVC jambliners. Operating units are supplied with cam-type sash locks installed. Die-cast lower sash lifts supplied for field installation are an option. Recessed sash retainers provide simple sash installation and removal. There are several hardware finish options. Refer to the Specifications for available finish options. Multiple Assemblies Siteline Clad Double-Hung windows may be mulled beside other clad double-hungs or clad picture windows, or below clad transom windows, to fulfill a wide variety of needs. Scale: NTS 2

3 CLEAR OPENING 1 7/8" Clear Opening 1 7/8" Double-Hung Clear Opening Formula Vertical (Frame Height / 2) - 3 5/8" = Clear Opening HORIZONTAL Frame Width - 3 3/4" = Clear Opening Clear Opening Double-Hung Window 2 3/4" 1 7/8" Clear Opening 1 7/8" 1 7/8" Clear Opening 1 7/8" Clear Opening Clear Opening Cottage Window Reverse 2 3/4" 2 3/4" Cottage Window Cottage & Reverse Cottage Consult the Design Data Tables for clear opening information. For dimensional units, contact Jeld-Wen - Hawkins Window Division, Technical Services Department for clear opening information. Scale: NTS 3

4 LITE CUT INFORMATION Clad Double-Hung windows are available with removable grilles in 7/8", 1-1/8" and 1- widths, grilles between the glass (GBG) and Simulated Divided Lites. Standard lite cuts are rectangular, and conform to the layouts noted in the charts on the next page. To use the chart, refer to the appropriate table by the type of window and type of bars or grilles the section drawings illustrate. Then simply cross reference the frame Height and Width to determine the standard lite cut. LIte Cut Options Special lite cut patterns can include a wide variety of straight line and radius patterns. The illustrations shown here represent just a few of the possibilities. Rectangular, horizontal, vertical and Prairie lite patterns are available in all standard size Clad Double-Hung windows. Uneven, diamond, radius and Gothic lite cuts are available, subject to approval. Approvals are based on the ability to fulfill the design requirement while maintaining the construction integrity of the finished product. Rectangular Vertical Prairie Uneven Diamond Radius Gothic Bar Alignment Alignment of divided lite muntin bars from one window to the next is often required by fine architectural design. Wood grilles, GBG's, and Simulated Divided Lites may be specified with muntin bars aligned. Scale: NTS 4

5 UNIT SIZING General Notes: Unit size is always the maximum size of the window with or without trim and does not include nail fin. Horizontal exterior trim offerings below are the same with or without sill nose. Masonry Opening: Masonry opening is always 1/2" over (height and width) the unit size or the outside of the trim of the window. : Rough opening is always 3/4" over frame size of the window. A (BM) B (BBM) C (AC) Vertical exterior trim offerings with standard sill nosing. Trim on 3 sides. D (FC) H (FC) G (AC) F (BBM) E (BM) Scale: NTS 5

6 OPERATION AND SASH TILT Double-Hung Operation: When the sash are locked at the check rails the sash are closed and sealed in the sash opening of the frame. When the sash are unlocked the lower sash travels vertically to any position desired. The upper sash can also be positioned as desired. Sash TIlting for Washing The Siteline Double-Hung window will allow the sash to be tilted or removed for easy cleaning. Scale: NTS 6

7 DIVIDED LITE OPTIONS 7/8" 1 1/8" 1 7/8" Bead SDL 1 1/8" Bead SDL 1 Bead SDL Bead SDL 5/8" 11/16" 1" 5/8" GBG 23/32" Contour GBG 1" Contour GBG 7/8" 1 1/8" 1 Full Surround 7/8" Wood Grille Full Surround 1 1/8" Wood Grille Full Surround 1 Wood Grille Scale: NTS 7

8 DIVIDED LITE OPTIONS 5/8" 7/8" 1 1/8" 1 5/8" Putty / Bead 7/8" Putty / Bead 1 1/8" Putty / Bead 1 Putty / Bead Putty / Bead 5/8" 7/8" 1 1/8" 1 5/8" Putty / Putty 7/8" Putty / Putty 1 1/8" Putty / Putty 1 Putty / Putty Putty / Putty 5/8" 7/8" 1 1/8" 1 5/8" Bead / Putty 7/8" Bead / Putty 1 1/8" Bead / Putty 1 Bead / Putty Bead / Putty Scale: NTS 8

9 TRIM AND SILL OPTIONS 1 1/2" 1 5/16" 1 1/2" 1 1/2" Standard Brickmould Beaded Brickmould 1 3/4" 1 5/16" 3" 3" Adams Casing 3 1/2" Flat Casing Sill Options 9/16" No Sill Nose 5/16" 1 3/4" Standard Sill Nose 1/2" 1" 1 1/16" 1 3/4" 1" Sill Nose 2 1/16" 2" Sill Nose 2 1/4" Scale: NTS 9

10 GLASS STOP OPTIONS Traditional Contemporary Scale: 1' - 0" = 1' - 0" 10

11 JAMB EXTENDER & PREP FOR STOOL OPTIONS 5/16" 11/16" 11/16" 11/16" 4 1/16" 4 1/16" 1/4" 2" 6 9/16" 8 5/8" 8 5/8" 6 9/16" Wall 4/4 Jamb Thickness (Standard) 8 5/8" Wall 8 5/8" Wall Kerfed Extension Shown 11/16" 9 5/16" 4 3/4" Stool Prep for Stool Apron Sill Support 9 5/16" Wall Max 1-PC Jamb Extender Note: Stool, apron, and sill support are applied by trim carpenter after window is installed and are not provided by JELD-WEN. Unit is shipped without sill jamb extenders. Note: Double-Hungs to have standard (4/4 thick) extension. Scale: 3" = 1' - 0" 11

12 MULLION OPTIONS 6 7/16" 1 1 3/4" 6 5/8" Operating / Operating Stationary Operating 6 7/16" 6 7/16" 1 1 Stationary / Stationary Operating / Stationary Scale: NTS 12

13 SPREAD MULLION OPTIONS 7 7/16" 2 1/8" 8 7/16" 3 1/8" 1" 2" Operating / Operating with 1" Solid Spread Mull Operating / Operating with 2" Solid Spread Mull 10 7/16" 5 1/8" 4" Operating / Operating with 4" Solid Spread Mull Scale: NTS 13

14 SPREAD MULLION OPTIONS 1" 2 1/8" 7 5/8" 2" 3 1/8" 8 5/8" Stationary Operating with 1" Solid Spread Mull Stationary Operating with 2" Solid Spread Mull 4" 5 1/8" 10 5/8" Stationary Operating with 4" Solid Spread Mull Scale: NTS 14

15 BAY ROUGH OPENING Vertical typical for all Units 1 3/16" Standard Offering 3/4" [19] HEADBOARD 3/4" Basic Unit Frame Height Overall Frame Height Basic Unit Frame Height + 1 1/2" (38) Overall Overall Frame Height + 3/4" (19) SEATBOARD 3/4" [19] Vertical Masonry Opening will be 1/2" [13] larger than the Overall Unit Height. Horizontal typical for all Units Exterior of Wall 30 & 45 BAYS 45 Bay Shown Scale: NTS 15

16 OPERATOR MIN-MAX SIZING 92" 32" 21 Minimum Configuration 45 Maximum Configuration Scale: NTS 16

17 PICTURE MIN-MAX SIZING 92" 80" 15" Minimum Configuration Maximum Configurations * Note: 69 and 77 Frame Widths not available with 88" and 92" Frame Heights. Scale: NTS 17

18 TRANSOM MIN-MAX SIZING 24" 15" 21 Minimum Configuration 77 Maximum Configuration Scale: NTS 18

19 OPERATOR - VERTICAL SECTION 15/16" 11/16" 2 Daylight Opening Daylight Opening 2 1/8" 1 1/2" Frame Size 1 5/8" Scale: 6" = 1' - 0" 19

20 OPERATOR - HORIZONTAL SECTION Frame Size 1 5/8" 1 5/8" 1 5/8" Daylight Opening 1 5/8" 1 7/16" 1 7/16" 1 11/16" Daylight Opening 1 11/16" 1 5/8" 1 5/8" Scale: 6" = 1' - 0" 20

21 IMPACT OPERATOR - VERTICAL SECTION 15/16" 11/16" 2 Daylight Opening Daylight Opening 2 1/8" 1 1/2" Frame Size 1 5/8" Scale: 6" = 1' - 0" 21

22 IMPACT OPERATOR - HORIZONTAL SECTION Frame Size 1 5/8" 1 5/8" 1 5/8" Daylight Opening 1 5/8" 1 7/16" 1 7/16" 1 11/16" Daylight Opening 1 11/16" 1 5/8" 1 5/8" Scale: 6" = 1' - 0" 22

23 PICTURE - VERTICAL SECTION 1 11/16" 15/16" Daylight Opening Frame Size 2 3/4" 1 5/8" Scale: 6" = 1' - 0" 23

24 PICTURE - HORIZONTAL SECTION Frame Size 7/8" 7/8" Daylight Opening 1 9/16" Scale: 6" = 1' - 0" 24

25 IMPACT PICTURE - VERTICAL SECTION 1 11/16" 15/16" Daylight Opening Frame Size 2 3/4" 1 5/8" Scale: 6" = 1' - 0" 25

26 IMPACT PICTURE - HORIZONTAL SECTION Frame Size 7/8" 7/8" Daylight Opening Scale: 6" = 1' - 0" 26

27 PICTURE RADIUS - VERTICAL SECTION 1 11/16" 15/16" Daylight Opening Frame Size 2 3/4" 1 5/8" Scale: 6" = 1' - 0" 27

28 PICTURE SEGMENT - VERTICAL SECTION 1 11/16" 15/16" Daylight Opening Frame Size 2 3/4" 1 5/8" Scale: 6" = 1' - 0" 28

29 TRANSOM - VERTICAL SECTION 15/16" 3 1/4" 2 Daylight Opening Frame Size /16" 1 1/16" Scale: 6" = 1' - 0" 29

30 TRANSOM - HORIZONTAL SECTION Frame Size 3 1/4" 3 1/4" 2 Daylight Opening 2 15/16" 15/16" Scale: 6" = 1' - 0" 30

31 IMPACT TRANSOM - VERTICAL SECTION 15/16" 2 Daylight Opening Frame Size 2 2 7/16" 1 1/16" Scale: 6" = 1' - 0" 31

32 IMPACT TRANSOM - HORIZONTAL SECTION Frame Size 3 1/4" 3 1/4" 2 Daylight Opening 2 15/16" 15/16" Scale: 6" = 1' - 0" 32

33 TRANSOM RADIUS - VERTICAL SECTION 15/16" 9/16" 11/16" 2 Daylight Opening Frame Size 2 2 7/16" 1 1/16" Scale: 6" = 1' - 0" 33

34 TRANSOM SEGMENT - VERTICAL SECTION 15/16" 9/16" 11/16" 2 Daylight Opening Frame Size 2 2 7/16" 1 1/16" Scale: 6" = 1' - 0" 34

35 RADIUS TOP - VERTICAL SECTION 1 1/8" 2 1/4" 1 1/2" Daylight Opening Daylight Opening 2 1/8" Frame Size 1 5/8" Scale: 6" = 1' - 0" 35

36 SEGMENT HEAD - VERTICAL SECTION 7/8" 11/16" 2 1 1/2" Daylight Opening Daylight Opening 2 1/8" Frame Size 1 5/8" Scale: 6" = 1' - 0" 36