Double-Hung Windows Premium Atlantic Aluminum

Transcription

1 TABL OF CONTNTS Specifications QuickSpecGuide levations: Scale Double-Hung Double-Hung - Florida Sizes Grille Patterns SectionDetails: 6 Scale InstallationWallDetails PagethroughthePDFusingthebutonsontheright, orclickatopicabovetogodirectlytothatpage. JLD-WN reserves the right to change specifications without notice. Page 1-1

2 PRODUCT SPCIFICATIONS MATRIALS White and MB-40 bronze electrostatically applied baked polyester paint. FRAM All frames are mechanically assembled with a gasket and a secondary silicone seal for added assurance of weather tight performance. The frame jamb width is 2- (73mm), and the nominal extrusion exterior wall thickness is The frame incorporates a 1/2 front flange for typical Florida installations into block construction. A sloped sill with weep holes are in the frame to ensure standing water is directed to the exterior plane of the unit. Optional frame types: slip-on nailing fin. SASH The double-hung sash is a nominal 1- (28.65mm) thickness. It is mechanically fastened for added strength and durability, and silicone sealed to ensure weather tight performance. GLAZING (15.9mm) insulated glass consists of two lites of glass sealed around a spacer. (3mm) and 3/16 (5mm) monolithic glazing. The glass is mounted into the sash using a silicone-glazing compound. The insulating glass units comply with the performance requirements of the IGCC in accordance with either ASTM 774 or All units are exterior glazed. GLAZING OPTIONS (15.9mm) insulated glass is available in clear, Low- or Low- 366, tinted, obscure or other specialty insulating glass as specified. (3mm) and 3/16 (5mm) monolithic glazing. Many glass options are available in tempered glazing, monolithic, or Impact Resistant glass. WATHR-STRIPPING A fin-pile weather-strip is applied to sash jamb, sash interlocks, and main head/sill. HARDWAR A single action cam style lock is available on all windows. Block and Tackle balance systems are utilized to support the vertical operation of the sash. Head/Sill latches are standard for Impact units. Sill latches are optional for non-impact units. INSCT SCRNS The exterior fiberglass charcoal color insect screen is set in an aluminum frame to match the color of the unit. The spring loaded screen system assists in keeping it secured to the window. Insect screens are intended to allow air and light in and keep insects out. They are not intended to keep anyone or anything from falling through an open door or window. For safety screens or other security devices contact your local building supply retailer. GRILLS GBG (Grilles between the Glass) - (16mm) and (22.2mm) flat grilles mounted between the glass panes suspended within the air cavity and color matched to the extrusion color. SDL (Simulated Divided Lite) (25.4mm) vinyl contour outside/flat inside muntins surface mounted on the exterior surfaces of the single glazed impact glass unit to provide a true divided lite appearance. Available in white only. DA (Double Applied) - Aluminum double applied flat/flat bar is applied to the exterior of the single glazed glass to give the detail of a true divided look. ADDITIONAL ACCSSORIS Please contact your local building supply retailer for a complete listing of the additional accessories. See findsupplier. INSTALLATION See for instructions. PRFORMANC Please reference for up to date Design Pressure and approval information. JLD-WN reserves the right to change specifications without notice. Page 1-2

3 QUICK SPC GUID SPCIFICATION STANDARD FATURS OPTIONAL FATURS Some options may require additional lead times. Consult your JLD-WN Sales Representative. COLOR S White S Bronze SIZ S Width: S Height: FRAM S 1/2 Flange S Slip-On Fin GLAZING S Single-Glaze Clear S Insulated S 3/16 Single-Glaze S ImpactGard Single-Glaze S 7/16 ImpactGard Single-Glaze S Low- Insulated S Bronze S Gray S Green S Obscure S Azurlite S Graylite (Turtle) S Bronze Reflective All glass is available tempered IMPACTGARD S PVB Impact PROTCTION S SGP Impact Single-Glaze Not available in tempered. PVB monolithic not available in Low-. All other tint and obscure glazing options apply. HARDWAR S Cam-Lock S Block & Tackle Balance HARDWAR COLOR S Matches Frame SCRNS S Fiberglass SCRN FRAM COLOR S Matches Frame GRILLS S SDL - Simulated Divided Lite available only in white and only on impact resistant units S Double Applied Flat/Flat Bar S, Flat GBG* S Contour *Check for availability JAMB S 2- JLD-WN reserves the right to change specifications without notice. Page 1-3

4 DOUBL-HUNG UNIT SIZ ROUGH OPNING FRAM SIZ DAYLIGHT OPNING 24 (610) 23 1/2 (597) 23 (584) 18 (457) 30 (762) 29 1/2 (749) 29 (737) 24 (610) 36 (914) 35 1/2 (902) 35 (889) 30 (762) 42 (1067) 41 1/2 (1054) 4(1041) 36 (914) 48 (1219) 47 1/2 (1207) 47 (1194) 42 (1067) 54 (1372) 53 1/2 (1359) 53 (1346) 48 (1219) 24 (610) 23 1/2 (597) 23 (584) 7 3/8 (187) 6DH2424 6DH3024 6DH3624 6DH4224 6DH4824 6DH5424 6DH2430 6DH3030 6DH3630 6DH4230 6DH4830 6DH5430 6DH2436 6DH3036 6DH3636 6DH4236 6DH4836 6DH (1067) 41 1/2 (1054) 4(1041) 16 3/8 (416) 15 (400) 36 (914) 35 1/2 (902) 35 (889) 13 3/8 (340) 12 (324) 30 (762) 29 1/2 (749) 29 (737) 10 3/8 (264) 9 (248) 6 (171) 6DH2442 6DH3042 6DH3642 6DH4242 6DH4842 6DH (1219) 47 1/2 (1207) 47 (1194) 19 3/8 (492) 18 (476) 6DH2448 6DH3048 6DH3648 6DH4248 6DH4848 6DH (1372) 53 1/2 (1359) 53 (1346) 22 3/8 (568) 21 (552) 6DH2454 6DH3054 6DH3654 6DH4254 6DH4854 6DH (1524) 59 1/2 (1511) 59 (1499) 25 3/8 (645) 24 (629) 6DH2460 6DH3060 6DH3660 6DH4260 6DH4860 6DH5460 LVATION SYMBOL LGND: VALUS IN () AR IN MILLIMTR CONVRSIONS. SCAL: = 1 JLD-WN reserves the right to change specifications without notice. Page 1-4

5 DOUBL-HUNG UNIT SIZ ROUGH OPNING FRAM SIZ DAYLIGHT OPNING 24 (610) 23 1/2 (597) 23 (584) 18 (457) 30 (762) 29 1/2 (749) 29 (737) 24 (610) 36 (914) 35 1/2 (902) 35 (889) 30 (762) 42 (1067) 41 1/2 (1054) 4(1041) 36 (914) 48 (1219) 47 1/2 (1207) 47 (1194) 42 (1067) 54 (1372) 53 1/2 (1359) 53 (1346) 48 (1219) 6DH2472 6DH3072 6DH3672 6DH4272 6DH4872 6DH5472 6DH2476 6DH3076 6DH3676 6DH4276 6DH4876 6DH (2134) 83 1/2 (2121) 83 (2108) 37 3/8 (949) 36 (933) 76 (1930) 75 1/2 (1918) 75 (1905) 33 3/8 (848) 32 (832) 72 (1829) 71 1/2 (1861) 7(1803) 31 3/8 (797) 30 (781) 6DH2484 6DH3084 6DH3684 6DH4284 6DH4884 6DH (2286) 89 1/2 (2273) 89 (2261) 40 3/8 (1026) 39 (1010) 6DH2490 6DH3090 6DH3690 6DH4290 6DH4890 6DH5490 LVATION SYMBOL LGND: VALUS IN () AR IN MILLIMTR CONVRSIONS. UNIT MTS GRSS RQUIRMNTS FOR IRC COD. STAT AND LOCAL GRSS CODS MAY DIFFR. ALWAYS RFR TO LOCAL BUILDING CODS FOR COMPLT RQUIRMNTS. CHCK WITH LOCAL OFFICIALS TO NSUR COMPLIANC BFOR INSTALLING TH UNIT. SCAL: = 1 JLD-WN reserves the right to change specifications without notice. Page 1-5

6 DOUBL-HUNG - FLORIDA SIZS UNIT SIZ ROUGH OPNING FRAM SIZ DAYLIGHT OPNING 19 (486) 18 (473) 18 (460) 12 27/32 (326) 26 1/2 (673) 26 (660) 25 1/2 (648) 20 7/32 (514) 37 (940) 36 1/2 (927) 36 (914) 30 23/32 (780) 53 (1349) 52 (1337) 52 (1324) 46 27/32 (1190) 50 (1286) 50 (1273) 49 (1260) 20 13/32 (519) 38 3/8 (975) 37 (962) 37 3/8 (949) 14 9/32 (363) 26 (660) 25 1/2 (648) 25 (635) 8 3/32 (206) 6DH-12 6DH-H32 6DH-22 6DH-32 6DH-13 6DH-H33 6DH-23 6DH-33 6DH-14 6DH-H34 6DH-249-6DH-349-6DH-15 6DH-H35 6DH-25 6DH-35 6DH-16S 6DH-H36S 6DH-26S 6DH-36S 76 (1930) 75 1/2 (1918) 75 (1905) 33 3/32 (841) 32 15/32 (824) 72 (1829) 71 1/2 (1861) 7(1803) 31 3/32 (790) 30 15/32 (774) 63 (1600) 62 1/2 (1588) 62 (1575) 26 3/32 (663) 25 15/32 (647) 19 25/32 (502) 12 21/32 (321) 7 15/32 (190) 6DH-16 6DH-H36 6DH-26 6DH-36 LVATION SYMBOL LGND: VALUS IN () AR IN MILLIMTR CONVRSIONS. UNIT MTS GRSS RQUIRMNTS FOR IRC COD. STAT AND LOCAL GRSS CODS MAY DIFFR. ALWAYS RFR TO LOCAL BUILDING CODS FOR COMPLT RQUIRMNTS. CHCK WITH LOCAL OFFICIALS TO NSUR COMPLIANC BFOR INSTALLING TH UNIT. SCAL: = 1 JLD-WN reserves the right to change specifications without notice. Page 1-6

7 GRILL PATTRNS STANDARD PRAIRI PRAIRI SASH COLONIAL TOP SASH COLONIAL TOP SASH 1/2 LIT JLD-WN reserves the right to change specifications without notice. Page 1-7

8 DOUBL-HUNG FLANG - SINGL-GLAZ 1 1/2 Frame Size 1 3/16 9/16 1 VRTICAL SCTION SCAL: 6 = 1 JLD-WN reserves the right to change specifications without notice. Page 1-8

9 DOUBL-HUNG FLANG - SINGL-GLAZ Frame Size /8 1 1 HORIZONTAL SCTION SCAL: 6 = 1 JLD-WN reserves the right to change specifications without notice. Page 1-9

10 DOUBL-HUNG FLANG - INSULATD 1 1/2 Frame Size 1 3/16 9/16 1 VRTICAL SCTION SCAL: 6 = 1 JLD-WN reserves the right to change specifications without notice. Page 1-10

11 DOUBL-HUNG FLANG - INSULATD Frame Size /8 1 1 HORIZONTAL SCTION SCAL: 6 = 1 JLD-WN reserves the right to change specifications without notice. Page 1-11

12 DOUBL-HUNG SLIP ON NAIL FIN - SINGL-GLAZ 2 1/16 1 1/2 Frame Size 1 3/16 1 VRTICAL SCTION SCAL: 6 = 1 JLD-WN reserves the right to change specifications without notice. Page 1-12

13 DOUBL-HUNG SLIP ON NAIL FIN - SINGL-GLAZ Frame Size /8 1 1 HORIZONTAL SCTION SCAL: 6 = 1 JLD-WN reserves the right to change specifications without notice. Page 1-13

14 DOUBL-HUNG SLIP ON NAIL FIN - INSULATD 11/2 1 1/2 Frame Size 1 3/16 1 VRTICAL SCTION SCAL: 6 = 1 JLD-WN reserves the right to change specifications without notice. Page 1-14

15 DOUBL-HUNG SLIP ON NAIL FIN - INSULATD Frame Size /8 3/8 1 1 HORIZONTAL SCTION SCAL: 6 = 1 JLD-WN reserves the right to change specifications without notice. Page 1-15

16 DOUBL-HUNG - FLORIDA SIZS FLANG - IMPACT 1 1/2 Frame Size 1 3/16 9/16 1 VRTICAL SCTION SCAL: 6 = 1 JLD-WN reserves the right to change specifications without notice. Page 1-16

17 DOUBL-HUNG - FLORIDA SIZS FLANG - IMPACT Frame Size /8 HORIZONTAL SCTION SCAL: 6 = 1 JLD-WN reserves the right to change specifications without notice. Page 1-17

18 DOUBL-HUNG - FLORIDA SIZS SLIP ON NAIL FIN - IMPACT 11/2 1 1/2 Frame Size 1 3/16 1 VRTICAL SCTION SCAL: 6 = 1 JLD-WN reserves the right to change specifications without notice. Page 1-18

19 DOUBL-HUNG - FLORIDA SIZS SLIP ON NAIL FIN - IMPACT Frame Size /8 1 1 HORIZONTAL SCTION SCAL: 6 = 1 JLD-WN reserves the right to change specifications without notice. Page 1-19

20 INSTALLATION WALL DTAIL CMU SALANT AND BACKR ROD BY OTHRS LOW XPANSION FOAM BY OTHRS INSTALLATION: Doors and windows to be installed per latest revision of ASTM STANDARD PRACTIC FOR INSTALLATION OF XTRIOR WINDOWS, DOORS AND SKYLIGHTS. Weather plane flashing must provide a continuous seal between weather plane of fenestration product and weather plane of wall system. DRAIN MAT, TO TRMINAT OVR CONTINUOUS MOISTUR BARRIR (WATHR PLAN OF BUILDING) BY OTHRS Frame Size All metal to metal joints must be sealed after installation, this includes, but is not limited to drip caps and mullion covers. Job site Frame to Frame Mull joints must be silicon sealed between frames. JLD-WN recommends all window products be installed with a sill pan or equivalent must include back dam and side NOT: Please refer to the JLD-WN web site for installation instructions at: SALANT AND BACKR ROD BY OTHRS WINDOW SCURD WITH ANGL BRACKT BY OTHRS 7 MIN. SLOP WOOD TRIM BY OTHRS VRTICAL SCTION Frame Size SALANT & BACKR ROD BY OTHRS LOW PRSSUR FOAM BY OTHRS HORIZONTAL SCTION Details shown are for representation only and intended to reflect basic installation concepts. Proper installation and maintenance of JLD-WN products are essential if optimum performance is to be fully attained. Written installation instructions that provide guidelines are available on our website at JLD-WN reserves the right to change specifications without notice. Page 1-20

21 INSTALLATION WALL DTAIL LAP SIDING SALANT BY OTHRS CONTINUOUS MOISTUR BARRIR BY OTHRS CONTINUOUS SALANT BHIND NAIL FIN, ALL SIDS, BY OTHRS SLF-ADHSIV FLASHING OVR NAIL FLANG BY OTHRS CONTINUOUS SALANT AND BACKR ROD BY OTHRS LOW XPANSION FOAM BY OTHRS INSTALLATION: Doors and windows to be installed per latest revision of ASTM STANDARD PRACTIC FOR INSTALLATION OF XTRIOR WINDOWS, DOORS AND SKYLIGHTS. Weather plane flashing must provide a continuous seal between weather plane of fenestration product and weather plane of wall system. All metal to metal joints must be sealed after installation, this includes, but is not limited to drip caps and mullion covers. Frame Size Job site Frame to Frame Mull joints must be silicon sealed between frames. JLD-WN recommends all window products be installed with a sill pan or equivalent must include back dam and side NOT: Please refer to the JLD-WN web site for installation instructions at: DRAIN MAT, TO TRMINAT OVR CONTINUOUS MOISTUR BARRIR (WATHR PLAN OF BUILDING) BY OTHRS CONTINUOUS BAD OF SALANT BTWN NAIL FIN AND DRAIN MAT CONTINUOUS SALANT AND BACKR ROD BY OTHRS CONTINUOUS MOISTUR BARRIR BY OTHRS THRU WALL FLASHING BY OTHRS WOOD SILL AND TRIM BY OTHRS VRTICAL SCTION Frame Size SALANT & BACKR ROD BY OTHRS LOW PRSSUR FOAM BY OTHRS HORIZONTAL SCTION Details shown are for representation only and intended to reflect basic installation concepts. Proper installation and maintenance of JLD-WN products are essential if optimum performance is to be fully attained. Written installation instructions that provide guidelines are available on our website at JLD-WN reserves the right to change specifications without notice. Page 1-21

22 INSTALLATION WALL DTAIL STUCCO CONTINUOUS MOISTUR BARRIR BY OTHRS CONTINUOUS SALANT BHIND NAIL FIN, ALL SIDS, BY OTHRS INSTALLATION: Doors and windows to be installed per latest revision of ASTM STANDARD PRACTIC FOR INSTALLATION OF XTRIOR WINDOWS, DOORS AND SKYLIGHTS. SLF-ADHSIV FLASHING OVR NAIL FLANG BY OTHRS CONTINUOUS SALANT AND BACKR ROD BY OTHRS LOW XPANSION FOAM BY OTHRS Weather plane flashing must provide a continuous seal between weather plane of fenestration product and weather plane of wall system. All metal to metal joints must be sealed after installation, this includes, but is not limited to drip caps and mullion covers. Frame Size Job site Frame to Frame Mull joints must be silicon sealed between frames. JLD-WN recommends all window products be installed with a sill pan or equivalent must include back dam and side NOT: Please refer to the JLD-WN web site for installation instructions at: DRAIN MAT, TO TRMINAT OVR CONTINUOUS MOISTUR BARRIR (WATHR PLAN OF BUILDING) BY OTHRS CONTINUOUS BAD OF SALANT BTWN NAIL FIN AND DRAIN MAT CONTINUOUS SALANT AND BACKR ROD BY OTHRS CONTINUOUS MOISTUR BARRIR BY OTHRS WOOD SILL AND TRIM BY OTHRS VRTICAL SCTION Frame Size CONTINUOUS SALANT AND BACKR ROD BY OTHRS LOW PRSSUR FOAM BY OTHRS HORIZONTAL SCTION Details shown are for representation only and intended to reflect basic installation concepts. Proper installation and maintenance of JLD-WN products are essential if optimum performance is to be fully attained. Written installation instructions that provide guidelines are available on our website at JLD-WN reserves the right to change specifications without notice. Page 1-22