Crochet. Slippers for Kids Design by Jennine Korejko #804889

Transcription

1 Slippers for Kids Design by Jennine Korejko Crochet # Original publication: Leaflet At Home With Crochet Copyright 2014 by Leisure Arts, Inc., 104 Champs Blvd., STE 100, Maumelle, AR

2 SLIPPERS FOR KIDS Easy to stitch, these sassy slippers for kids are as much fun to wear as they are to make! Pompoms and long single and double crochets worked in black create a bold accent on the booties. Soft and comfortable, they re made of long-wearing worsted weight yarn. Size: Small Medium Large Sole length: 6½ 7 7½ Size Note: Instructions are written for size Small with sizes Medium and Large in braces. Instructions will be easier to read if you circle all the numbers pertaining to your size. If only one number is given, it applies to all sizes. MATERIALS Wo rsted Weight Yarn, approximately: MC (Red) - 3{3½-4} ounces, [90{ } grams, 170{ } yards] CC (Black) - 40 yards Crochet hook, size G (4.00 mm) or size needed for gauge Yarn needle GAUGE: 8 sc = 2 PATTERN STITCHES DECREASE Pull up a loop in next 2 sts, YO and draw through all 3 loops on hook (counts as one sc). LONG DOUBLE CROCHET (abbreviated Long dc) YO, insert hook in st on row below next st, YO and pull up a loop even with loop on hook (Fig. 5), (YO and draw through 2 loops on hook) twice. LONG SINGLE CROCHET (abbreviated Long sc) Insert hook in st on row below next st, YO and pull up a loop even with loop on hook, YO and draw through both loops on hook. SOLE Holding 2 strands of MC together, ch 16{18-21} loosely. Rnd 1 (Right side): 3 Sc in second ch from hook, sc in each ch across to last ch, 3 sc in last ch; working in free loops of beginning ch (Fig. 23b), sc in each ch across; join with slip st to first sc: 32{36-42} sc. Note: Loop a short piece of yarn around any stitch to mark last round as right side. Rnd 2: Ch 1, turn; sc in next 7{7-8} sc, hdc in next 5{7-9} sc, 2 hdc in each of next 5 sc, hdc in next 5{7-9} sc, sc in next 7{7-8} sc, 2 sc in each of last 3 sc; join with slip st to first sc: 40{44-50} sts. Rnd 3: Ch 1, turn; 2 sc in each of next 5 sc, sc in next 8{8-9} sc, hdc in next 7{9-11} hdc, 2 hdc in each of next 5 hdc, hdc in next 7{9-11} hdc, sc in last 8{8-9} sts; join with slip st to first sc: 50{54-60} sts. Rnd 4: Ch 1, turn; sc in next 8 sc, hdc in next 10{11-14} hdc, 2 hdc in each of next 3{5-5} hdc, hdc in next 10{11-14} hdc, sc in next 12{12-11} sts, 2 sc in each of next 3{4-5} sc, sc in last 4{3-3} sc; finish off: 56{63-70} sts. TOP Rnd 1: With right side facing and working in Back Loops Only (Fig. 22), join 1 strand of MC with slip st in center back sc; ch 2 (counts as first hdc, now and throughout), hdc in next sc and in each st around; join with slip st to first hdc. Rnd 2: Ch 2, do not turn; working in both loops, hdc in next hdc and in each hdc around; join with slip st to first hdc, finish off. Rnd 3: With right side facing, join 1 strand of CC with slip st in same st as joining; ch 1, sc in same st and in next 2 hdc, work Long dc, sc in next 2 hdc, work Long sc, sc in next 3 hdc, work Long dc, sc in next 2 hdc, work Long sc; repeat from around; join with slip st to first sc, finish off. 2 Copyright 2014 by Leisure Arts, Inc.

3 Rnd 4: With right side facing, join 1 strand of MC with slip st in Back Loop Only of first sc; ch 2, hdc in Back Loop Only of next 2 sc, hdc in both loops of next st, hdc in Back Loop Only of next 2 sc, hdc in both loops of next st, hdc in Back Loop Only of next 3 sc, hdc in both loops of next st, hdc in Back Loop Only of next 2 sc, hdc in both loops of next st; repeat from around; join with slip st to first hdc. Rnd 5: Ch 2, working in both loops, hdc in next hdc and in each hdc around; join with slip st to first hdc. Rnd 6: Ch 2, hdc in next 25{28-33} hdc, decrease 5 times, hdc in each hdc around; join with slip st to first hdc: 51{58-65} sts. Rnd 7: Ch 2, hdc in next 23{26-31} hdc, decrease 5 times, hdc in each hdc around; join with slip st to first hdc: 46{53-60} sts. Rnd 8: Ch 2, hdc in next 11{13-13} hdc, dc in next 5{6-7} hdc, hdc in next 7{7-11} hdc, decrease 3 times, hdc in next 7{7-10} hdc, dc in next 5{6-7} hdc, hdc in each hdc around; join with slip st to first hdc: 43{50-57} sts. Rnd 9: Ch 2, hdc in next 15{18-20} sts, 2 dc in next dc, skip next 17{17-24} sts, 2 dc in next dc, hdc in each st around; join with slip st to first hdc, finish off: 28{35-35} sts. TRIM Rnd 1: With right side facing, join 1 strand of CC with slip st in center back hdc; ch 1, sc in same st and in next 2 hdc, work Long dc, sc in next 2 sts, work Long sc, sc in next 3 sts, work Long dc, sc in next 2 sts, work Long sc; repeat from around; join with slip st to first sc. Rnd 2: Ch 1, sc in each st around; join with slip st to Front Loop Only of first sc. Rnd 3: Ch 3, turn; (slip st in Back Loop Only of next sc, ch 3) around; join with slip st to base of first slip st. Rnd 4: Turn; working in free loops on Rnd 2 (Fig. 23a), slip st in each st around; join with slip st to first slip st, finish off. Sew seam. With CC, make two 1½ pom-poms (Figs. 29a & b) and attach to Slippers. 3 Copyright 2014 by Leisure Arts, Inc.

4 general instructions ABBREVIATIONS BLO BPdc BPhdc CC ch(s) dc dtr FLO FPdc FPhdc FPtr hdc MC mm Rnd(s) sc sp(s) st(s) tr YO Back Loop(s) Only Back Post double crochet(s) Back Post half double crochet(s) Contrasting Color chain(s) double crochet(s) double treble crochet(s) Front Loop(s) Only Front Post double crochet(s) Front Post half double crochet(s) Front Post treble crochet(s) half double crochet(s) Main Color millimeters Round(s) single crochet(s) space(s) stitch(es) treble crochet(s) yarn over work instructions following as many more times as indicated in addition to the first time. to work all instructions from first to second as many times as specified. ( ) or [ ] work enclosed instructions as many times as specified by the number immediately following or work all enclosed instructions in the stitch or space indicated or contains explanatory remarks. work even work without increasing or decreasing in the established pattern. GAUGE Correct gauge is essential for proper size or fit. Hook sizes given in instructions are merely guides and should never be used without first making a sample swatch as indicated. Then measure it, counting your stitches and rows or rounds carefully. If your swatch is smaller than specified, try again with a larger size hook; if larger, try again with a smaller size. Keep trying until you find the size that will give you the specified gauge. DO NOT HESITATE TO CHANGE HOOK SIZE TO OBTAIN CORRECT GAUGE. On garments and afghans, once proper gauge is obtained, measure width of piece approximately every 3 to be sure gauge remains consistent. 4 Copyright 2014 by Leisure Arts, Inc.

5 basic stitch guide CHAIN When beginning a first row of crochet in a chain, always skip the first chain from the hook, and work into the second chain from hook (for single crochet), third chain from hook (for half double crochet), or fourth chain from hook (for double crochet), etc. (Fig. 1). SINGLE CROCHET (abbreviated sc) Insert hook in stitch or space indicated, YO and pull up a loop, YO and draw through both loops on hook (Fig. 4). Fig. 4 Fig. 1 WORKING INTO THE CHAIN Method 1: Insert hook into back ridge of each chain indicated (Fig. 2a). Method 2: Insert hook under top two strands of each chain (Fig. 2b). Fig. 2a Fig. 2b LONG STITCH Work single crochet (sc) or double crochet (dc) inserting hook in stitch indicated in instructions (Fig. 5) and pulling up a loop even with loop on hook; complete as instructed. Fig. 5 MAKING A BEGINNING RING Chain amount indicated in instructions. Being careful not to twist chain, slip stitch in first chain to form a ring (Fig. 3). Fig. 3 HALF DOUBLE CROCHET (abbreviated hdc) YO, insert hook in stitch or space indicated, YO and pull up a loop, YO and draw through all 3 loops on hook (Fig. 6). Fig Copyright 2014 by Leisure Arts, Inc.

6 DOUBLE CROCHET (abbreviated dc) YO, insert hook in stitch or space indicated, YO and pull up a loop, YO and draw through 2 loops on hook (Fig. 7a), YO and draw through remaining 2 loops on hook (Fig. 7b). Fig. 7a DOUBLE TREBLE CROCHET (abbreviated dtr) YO three times, insert hook in stitch or space indicated, YO and pull up a loop (Fig. 9a), (YO and draw through 2 loops on hook) 4 times (Fig. 9b). Fig. 9a Fig. 7b Fig. 9b TREBLE CROCHET (abbreviated tr) YO twice, insert hook in stitch or space indicated, YO and pull up a loop (Fig. 8a), (YO and draw through 2 loops on hook) 3 times (Fig. 8b). CLUSTER A Cluster can be worked all in the same stitch or space (Figs. 10a & b), or across several stitches (Figs. 11a & b). Fig. 8a Fig. 10a Fig. 10b Fig. 8b Fig. 11a Fig. 11b 6 Copyright 2014 by Leisure Arts, Inc.

7 LOOP STITCH Insert hook in next stitch, wrap yarn around index finger of left hand once more, insert hook through both loops on finger following direction indicated by arrow (Fig. 12a), being careful to hook all loops (Fig. 12b), draw through stitch pulling each loop as specified in instructions, remove finger from loop, YO and draw through all 3 loops on hook (Loop St made, Fig. 12c). FRONT POST HALF DOUBLE CROCHET (abbreviated FPhdc) YO, insert hook from front to back around post of stitch indicated (Fig. 13), YO and pull up a loop, YO and draw through all 3 loops on hook (Fig. 14). Fig. 14 Fig. 12a Fig. 12b Fig. 12c BACK POST HALF DOUBLE CROCHET (abbreviated BPhdc) YO, insert hook from back to front around post of stitch indicated (Fig. 13), YO and pull up a loop, YO and draw through all 3 loops on hook (Fig. 15). Fig. 15 POST STITCH Work around post of stitch indicated, inserting hook in direction of arrow (Fig. 13). Fig Copyright 2014 by Leisure Arts, Inc.

8 FRONT POST DOUBLE CROCHET (abbreviated FPdc) YO, insert hook from front to back around post of stitch indicated (Fig. 13), YO and pull up a loop (Fig. 16), (YO and draw through 2 loops on hook) twice. Fig. 16 REVERSE SINGLE CROCHET (abbreviated Reverse sc) Working from left to right, insert hook in stitch to right of hook (Fig. 19a), YO and draw through, under and to left of loop on hook (2 loops on hook) (Fig. 19b), YO and draw through both loops on hook (Fig. 19c) (Reverse sc made, Fig. 19d). Fig. 19a Fig. 19b BACK POST DOUBLE CROCHET (abbreviated BPdc) YO, insert hook from back to front around post of stitch indicated (Fig. 13), YO and pull up a loop (Fig. 17), (YO and draw through 2 loops on hook) twice. Fig. 19c Fig. 19d Fig. 17 REVERSE HALF DOUBLE CROCHET (abbreviated Reverse hdc) Working from left to right, YO, insert hook in stitch indicated to right of hook (Fig. 20a), YO and draw through, under and to left of loops on hook (3 loops on hook) (Fig. 20b), YO and draw through all 3 loops on hook (Fig. 20c) (Reverse hdc made, Fig. 20d). FRONT POST TREBLE CROCHET (abbreviated FPtr) YO twice, insert hook from front to back around post of stitch indicated (Fig. 13), YO and pull up a loop (Fig. 18), (YO and draw through 2 loops on hook) 3 times. Fig. 20a Fig. 20b Fig. 18 Fig. 20c Fig. 20d 8 Copyright 2014 by Leisure Arts, Inc.

9 stitching tips YARN Yarn weight (type or size) is divided into four basic categories: Fingering (baby clothes), Sport (light-weight sweaters and afghans), Worsted (sweaters, afghans, toys), and Bulky (heavy sweaters, potholders, and afghans). Baby yarn may either be classified as Fingering or Sport - check the label for the recommended gauge. These weights have absolutely nothing to do with the number of plies. Ply refers to the number of strands that have been twisted together to make the yarn. There are fingering weight yarns consisting of four plies - and there are bulky weight yarns made of a single ply. SUBSTITUTING YARN Once you know the weight of the yarn specified for a particular pattern, any brand of the same weight may be used for that pattern. You may wish to purchase a single skein first, and crochet a gauge swatch. Compare the gauge (remember, it must match the gauge in the pattern) and then compare the way the new yarn looks to the photographed item to be sure that you ll be satisfied with the finished results. How many skeins to buy depends on the yardage. Compare the labels and don t hesitate to ask the shop owner for assistance. Ounces and grams can vary from one brand of the same weight yarn to another, but the yardage required to make a garment or item, in the size and pattern you ve chosen, will always remain the same provided gauge is met and maintained. DYE LOTS Yarn is dyed in lots and then numbered. Different lots of the same color will vary slightly in shade and will be noticeable if crocheted in the same piece. When buying yarn, it is important to check labels for the dye lot number. You should purchase enough of one color, from the same lot, to finish the entire project. It is a good practice to purchase an extra skein to be sure that you have enough to complete your project. HOOKS Crochet hooks used for working with yarn are made from aluminum, plastic, bone, or wood. They are lettered in sizes ranging from size B (2.25 mm) to the largest size Q (15.00 mm) - the higher the letter, the larger the hook size. Crochet hooks used for thread work are most commonly made of steel. They are numbered in sizes ranging from size 00 (3.50 mm) to a very small size 14 (.75 mm) and, unlike aluminum hooks, the higher the number, the smaller the hook size. HOW TO DETERMINE THE RIGHT SIDE Many designs are made with the front of the stitch as the right side. Notice that the front of the stitches are smooth (Fig. 21a) and the back of the stitches are bumpy (Fig. 21b). For easy identification, it may be helpful to loop a short piece of yarn, thread, or fabric around any stitch to mark right side. Fig. 21a Fig. 21b JOINING WITH SC When instructed to join with sc, begin with a slip knot on hook. Insert hook in stitch or space indicated, YO and pull up a loop, yarn over and draw through both loops on hook. 9 Copyright 2014 by Leisure Arts, Inc.

10 MARKERS Markers are used to help distinguish the beginning of each round being worked. Place a 2 scrap piece of yarn or fabric before the first stitch of each round, moving marker after each round is complete. Remove when no longer needed. BACK OR FRONT LOOP ONLY Work only in loop(s) indicated by arrow (Fig. 22). CHANGING COLORS Work the last stitch to within one step of completion, hook new yarn (Fig. 24a) and draw through loops on hook. Cut old yarn and work over both ends unless otherwise specified. When working in rounds, drop old yarn and join with slip stitch to first stitch using new yarn (Fig. 24b). Fig. 24a Fig. 22 FREE LOOP After working in Back or Front Loops Only on a row or round, there will be a ridge of unused loops. These are called the free loops. Later, when instructed to work in the free loops of the same row or round, work in these loops (Fig. 23a). When instructed to work in a free loop of a beginning chain, work in loop indicated by arrow (Fig. 23b). Fig. 24b Fig. 23a Fig. 23b WORKING OVER WIRE Place wire against chain or row indicated. Work stitches indicated over wire (Fig. 25). Fig Copyright 2014 by Leisure Arts, Inc.

11 finishing MAKING PILLOW FORM Using crocheted piece for pattern, cut two pieces of fabric, allowing ¼ for seam allowance. With right sides together, sew seam leaving a 2 opening for turning. Turn form right side out; stuff firmly and sew opening closed. WASHING AND BLOCKING For a more professional look, thread projects should be washed and blocked. Using a mild detergent and warm water and being careful not to rub, twist, or wring, gently squeeze suds through the piece. Rinse several times in cool, clear water. Roll piece in a clean terry towel and gently press out the excess moisture. Lay piece on a flat surface and shape to proper size; where needed, pin in place using stainless steel pins. Allow to dry completely. Doilies can be spray starched for extra crispness. WHIPSTITCH With wrong sides together, and beginning in corner stitch, sew through both pieces once to secure the beginning of the seam, leaving an ample yarn end to weave in later. Insert needle from front to back through both loops of each piece (Fig. 28a) or through inside loops (Fig. 28b). Bring needle around and insert it from front to back through the next loops of both pieces. Continue in this manner across to corner, keeping the sewing yarn fairly loose. Fig. 28a Fig. 28b POM-POM Cut a piece of cardboard 3 wide and as long as the diameter of your finished pom-pom is to be. Wind the yarn around the cardboard until it is approximately ½ thick in the middle (Fig. 29a). Carefully slip the yarn off the cardboard and firmly tie an 18 length of yarn around the middle (Fig. 29b). Leave yarn ends long enough to attach the pom-pom. Cut the loops on both ends and trim the pom-pom into a smooth ball. Fig. 29a Fig. 29b FRINGE Cut a piece of cardboard 8 wide and half as long as specified in instructions for finished strands. Wind the yarn loosely and evenly around the cardboard until the card is filled, then cut across one end; repeat as needed. Hold the number of strands specified for one knot together and fold in half. With wrong side facing and using a crochet hook, draw the folded end up through a row or stitch and pull the loose ends through the folded end (Fig. 30a); draw the knot up tightly (Fig. 30b). Repeat, spacing as specified. Lay flat on a hard surface and trim the ends. Fig. 30a Fig. 30b 11 Copyright 2014 by Leisure Arts, Inc.

12 STARCHING & BLOCKING TIPS 1. If using the same fabric stiffener for both white and colored items, starch the white items first, in case thread dye should bleed into the solution. 2. A good blocking board can make pinning easier. You can use heavy cardboard, an ironing board, ceiling board, etc. 3. Stainless steel pins with balls on the end will be easier to use and will help keep fingers from hurting. Fabric stiffener will permanently damage pins used for sewing. These can be set aside for all starching projects. 1. Fabric stiffener can be returned to the bottle after starching if it has not been contaminated with particles and dye. Clip one corner of the bag, then squeeze the bag, forcing the solution to flow into the bottle. 2. An acrylic spray can be used after starching to protect the piece from heat and humidity. STARCHING Read the following instructions before beginning. 1. Wash item using a mild detergent and warm water. Rinse thoroughly. Roll each piece in a clean terry towel and gently press out the excess moisture. Lay piece flat and allow to dry completely. 1. Pour fabric stiffener in a resealable plastic bag. Do not dilute stiffener. Note: This method is permanent and will not wash out. 2. Immerse dry piece in fabric stiffener, remove air, and seal the bag. Work solution thoroughly into each piece. Let soak for several hours or overnight. BLOCKING Good blocking techniques make a big difference in the quality of the finished piece. When pinning piece be careful not to split the threads when inserting pins between the stitches. Make sure curved parts are smooth, straight parts are straight and symmetrical components are equal. Use photo as a guide and use a generous quantity of pins to hold all of the components in place until dry. Refer to further instructions on this page for specific projects. SUNFLOWER BASKET 1. Remove Basket from solution and squeeze gently to remove as much excess stiffenener as possible. Blot with a paper towel several times to remove excess from holes. 1. With right side facing, pin bottom of Basket through Rnd 11 to plastic covered blocking board, forming a 9 circle. 2. Place a 9 plastic foam ring covered with plastic wrap into Basket, or use plastic wrap to create a ring. Curve Petals upward and pin in place. 3. Allow to dry completely. RUFFLED MINI TREE 1. Using heavy cardboard, form a cone that is pointed at top, 17 in height and 8½ in diameter at base. Tape along edge to secure and cover with plastic wrap. 2. Remove Tree from solution and squeeze gently to remove as much excess stiffener as possible. Blot with a paper towel several times to remove excess from holes. 3. Place Tree over cone and pin at regular intervals. Working with one Layer at a time, shape each into evenly spaced ruffles, stuffing each ruffle with plastic wrap to hold its shape; pin in place. 4. Allow to dry completely. 5. Apply protective coating to protect and preserve Tree after starching. PROTECTIVE COATING 1. Remove Tree from cardboard cone. Cover cone with waxed paper. 2. Wearing gloves and using a paintbrush, apply a light coat of porcelain glaze to entire surface. Remember to check and remove drips periodically. 3. Allow to dry completely. A second coat may be applied only after first coat is completely dry. Note: To wash Tree, rinse in cool or lukewarm water, then pat dry. Tree can be reshaped if necessary by using a hair dryer and shaping after area is warm. Allow to cool before using. We have made every effort to ensure that these instructions are accurate and complete. We cannot, however, be responsible for human error, typographical mistakes, or variations in individual work by Leisure Arts, Inc., 104 Champs Blvd, STE 100, Maumelle, Arkansas, All rights reserved. This digital publication is protected under federal copyright laws. Reproduction or distribution of this digital publication or any other Leisure Arts publication, including publications which are out of print, is prohibited unless specifically authorized. This includes, but is not limited to, any form of reproduction or distribution on or through the Internet, including posting, scanning, or transmission Copyright 2014 by Leisure Arts, Inc.