NOTES: Dimensions in parentheses are mm. For 1600 grille length and width dimensional information, see table on page K1-25.
|
|
- Antonia Jenkins
- 5 years ago
- Views:
Transcription
1 K, / Blade Thickness Dimensional Information & Frame Styles, FACE VIEW FOR FRAME STYLES A, B, C, AE, BE, CE, DS, & RG 7/" (22) 9" (229) MAX For grille length and width dimensional information, see table on page K2., FRAME STYLES A, B, C, AE, BE, CE, DS, & RG / / / /32 / /32 3/32 / 3/32 27/32 / 27/32 + 3/4 + /4 + 3/4 FRAME A FRAME B FRAME C / / / / / / /32 / /32 3/32 / 3/32 27/32 / 27/32 + 3/4 + /4 + 3/4 FRAME AE FRAME BE FRAME CE / / 3/4 /4 9/32 / 9/32 /32 / /32 + /4 /4 FRAME DS FRAME RG NOTE: Dimensions in parentheses are mm. K24 Excellence in Air Distribution KRUEGER 22
2 K, / Blade Thickness Dimensional Information & Frame Styles, FACE VIEW FOR FRAME STYLE D, FRAME STYLE D 9" (229) MAX 7/" (22) LENGTH EQUALS NOMINAL DUCT PLUS /4" () EQUALS NOMINAL DUCT PLUS /4" () 9/32 / / + /4, FACE VIEW FOR FRAME STYLE R, FRAME STYLE R 9/32 /" () FACE 9" (229) MAX 7/" (22) / EQUALS NOMINAL DUCT MINUS /4" () TYPICAL LENGTH EQUALS NOMINAL DUCT MINUS /4" () /32 / /4 /32 NOTE: Dimensions in parentheses are mm., Dimensional Information,, LENGTH & DIMENSIONAL DETAIL KRUEGER 22 O D F C CORE FRAMES A, B, C, D, R, H, M, & N D O F C CORE FRAMES DS, RG, & O O D F C CORE FRAMES AE, BE, & CE Frame Frame Length Overall Dimension Core Opening Length F O C A D /" D + 3/4" D 3/4" B D /" D + /4" D 3/4" C D /" D + 3/4" D 3/4" D D /" D + /4" D 3/4" R D /" D /4" D 3/4" AE D D + 3/4 D 3/" BE D D + /4" D 3/" CE D D + 3/4" D 3/" DS D D + 7/" D 3/4" RG D D D 3/4" H D D + 2 /4" D 3/" M D D + /" D 3/" N D D D 3/" O D 3/" D + 3/" D 3/4" NOTES: Lengths based on end caps mounted on each end. D = Nominal duct dimension length/width (or ordered length) F = Actual overall neck dimension length/width O = Overall face dimension length/width C = Actual core opening length/width Providing You With Air Distribution Solutions K2
3 K, / Blade Thickness Mounting Options, MOUNTING OPTIONS FOR FRAME STYLES A, B, C, & D NO MOUNTING SPRING CLIP MOUNTING SCREW HOLE MOUNTING* CONCEALED MOUNTING NOTES: All fastening methods for frame R are provided by others. * Frame D not available with screw hole mounting., MOUNTING OPTIONS FOR FRAME STYLES AE, BE, CE, DS, & RG NO MOUNTING SPRING CLIP MOUNTING + / CONCEALED MOUNTING Deflection Patterns, NORMAL AIR DEFLECTION PATTERN (N), EVERY OTHER AIR DEFLECTION PATTERN (E) / (3) K2 /4 () / () TYP / () TYP / (3) /4 () NOTE: Dimensions in parentheses are mm. /" (3) /2" (3) Excellence in Air Distribution /" () TYP /" () TYP /" (3) /2" (3) KRUEGER 22
4 K, / Blade Thickness Mitered Corner (MC, MC) Deflection Patterns MC, MC, 9 DEFLECTION PATTERN MC, MC, 3 DEFLECTION PATTERN L OUTWARD DEFLECTION (CO) DUCT MC, 9 DEFLECTION PATTERN L DUCT INWARD DEFLECTION (CI) OUTWARD DEFLECTION (CO) INWARD DEFLECTION (CI) OUTWARD DEFLECTION (WO) INWARD DEFLECTION (WI) 3º ALSO AVAILABLE Mitered Corner (MC, MC) Dimensional Data MC, OVERALL DIMENSIONS FOR FRAME STYLES Duct Duct Frames Width L A B C D R AE BE CE DS RG 2" 4" ( 2) 2" (3) 2 7/" (327) 2 /" (32) 2 3/" (34) 2 /" (3) 7/" (32) 3 3/" (33) 2 /" (329) 2 /" (32) 2 3/" (3) 2" (3) 4 /2" 2" (4 3) " (47) 7/" (479) /" (473) 3/" (47) /" (4) 7 7/" (44) 9 3/" (47) /" (4) /" (473) 3/" (42) " (47) MC, OVERALL DIMENSIONS FOR FRAME STYLES Duct Duct Frames Width L H M N O 2" 4" ( 2) 2" (3) 2 7/" (327) 2 3/" (32) 2" (3) 3" 4" (7 2) 2" (3) 2 /" (3) 4 /2" 2" (4 3) MC, MAXIMUM FLOOR LDING K2 " (47) 7/" (479) 3/" (47) " (47) /" (4) Maximum Vertical Distributed Load Maximum Vertical Live Load Excellence in Air Distribution Maximum Horizontal Load Model Blade Spacing lbs/in 2 lbs/ft 2 lbs Normal /" (3) /4" () 3 3 Every Other /" (3) /2" (3) 2 2 Dash indicates not available. KRUEGER 22
5 K, / Blade Thickness, Access Doors & Oversized Units, ACCESS DOOR OPTION LH LH LH FACE VIEW HINGE OUTSIDE " (2) TYP 72" (29) MAXIMUM DUCT TYP HINGE INSIDE RH " (2) TYP RH RH Linear bar access doors provide open area approximately (27) long by a width determined by the specified unit width. Access doors are not available with the models.,, OVERSIZED UNIT DIMENSIONAL DETAIL OVERALL FACE LENGTH DUCT LENGTH ALIGNMENT PIN OVERSIZED UNIT ASSEMBLED FACE VIEW 72" (29) MAX 72" (29) MAX DUCT LENGTH 72" (29) MAX ALIGNMENT TAB LEFT END BUTT CUT BOTH ENDS BUTT CUT BOTH ENDS BUTT CUT RIGHT END BUTT CUT OVERSIZED UNIT SECTIONS Oversized units are assembled with the minimum number of sections based on a maximum individual duct length of 72. Alignment tabs and pins are provided to facilitate assembly. Alignment tabs and pins are not available with frame M, N, and O. KRUEGER 22 Providing You With Air Distribution Solutions K29
6 K, / Blade Thickness, Accessories LINEAR OPPOSED BLADE DAMPER (LOBD) LINEAR STRAIGHTENING GRID (LSG) 3" (7) MINIMUM DUCT 3" (7) MINIMUM DUCT S 3" OR GREATER Do not use with frames DS and RG. Do not use with concealed mounting. 3 /" (7) S 3" OR GREATER Do not use with frames M, N, or R. Do not use with spring clip mounting. 2 7/" (2) SINGLE BLADE DAMPER (SBD) SINGLE BLADE DAMPER (SBD) 2" () DUCT DAMPER ADJUSTMENT 2 /2" (4) TO 4" (2) DUCT 2" ONLY S 2 /2" TO 4" Do not use with frames H, M, N, O, DS, or RG. Do not use with concealed mounting. Do not use with widths greater than 2 (). Do not use with frames H, M, N, O, DS, or RG. Do not use with concealed mounting. BLANKOFF STRIP (BOS) 2" () MINIMUM DUCT /" (27) Do not use with spring clip mounting. K3 Excellence in Air Distribution KRUEGER 22
LINEAR DIFFUSERS AND BAR GRILLES
Model 49-240 Model 48LL1 Model 49-280 Model 49-480 Model 48LL2 Linear ar Grilles The Nailor 4900 Series provides an extruded aluminum bar grille that offers beautiful styling and efficient performance.
More informationINSTALLATION & OPERATION MANUAL ML-37 / ML-38 / ML-39 MLR-37 / MLR-38 / MLR-39. Redefine your comfort zone.
INTALLATION & OPERATION MANUAL ML-37 / ML-38 / ML-39 MLR-37 / MLR-38 / MLR-39 IOM Linear lot Ceiling Diffusers Factory Cut upply ML-37 ML-38 ML-39 Factory Cut Return MLR-37 MLR-38 MLR-39 Factory pacer
More information6490, These perforated. ceiling returns feature a. square neck. Aluminum or steel perforated face. is available. 6600, 56600, 6600FR
C1 Table of Contents 1, 15 51, 515 feature a neck mounted rotatable core with either a round or square neck. Aluminum or steel perforated face is, 5 R, supply, ceiling diffusers feature neck mounted curved
More informationLINEAR AIR GRILLE LF - 202/LF 212 / LF / LF ACCESSORIES
TYPE LF - 202/LF 212 / LF 202-2 / LF 212-2 LINEAR AIR GRILLE ACCESSORIES DESCRIPTION The linear air grilles of LF-202, LF-212 series are suitable for installation on walls, ducts and false ceilings. The
More informationSiding Systems NOVIKSTONETM DS DRY STACK STONE INSTALLATION GUIDE
Siding Systems NOVIKSTONETM DS DRY STACK STONE GENERAL INFORMATION CAUTION: REMEMBER THAT POLYMER UNDERGOES EXPANSION/CONTRACTION DUE TO VARIATIONS IN TEMPERATURE. THE FOLLOWING INSTRUCTIONS WILL ALLOW
More informationAssembly Instructions
Unite Panel System Hinge Door July 2016 #12 x / slotted hex washer head bolt Figure 1 threshold bracket frame Detail F threshold bracket threshold bracket (installed) #12 x / slotted hex washer head bolt
More informationModel 30/L/0. Model 30/S/0. Shortl Blades, 0 Deflection 3/4" Spacing. Model 35/S/0 Short Blades, 0 Deflection 1/2" Spacing
model 30 / 35 - Steel Return Grilles & Registers 0 Deflection 0 fixed blade deflection maximizes free area for low pressure loss and sound levels Potential line of sight into duct thru grille is acceptable
More informationPontiac Grand Am SC/T Installation Instruction Sheet Aftermarket Front Fascia
Aftermarket Front Fascia be used correctly to install the secondary fascia to the existing fascia. 1 Fascia Front 5 Bolt M6-1.0x60 5 Washer 1/4x9/16 2 Bolt/Washer Assembly 1 Nut/Washer Assembly 1. Six
More informationHahn AT-G. The simple hinge for light aluminium doors. Quick secure Wide variety of uses
Hahn AT-G The simple hinge for light aluminium doors! Quick secure Wide variety of uses 2 Hahn AT-G The simple hinge for light aluminium doors Constructed of extruded aluminium well-suited to withstand
More informationInstalling Novi Siding Trim
Installing Novi Siding Trim CAUTION: Remember that polymer undergoes expansion/contraction due to variations in temperature. The following instructions will allow for the expansion/contraction of the material.
More informationHow do I cut the wedge piece that goes in the corner of a cathedral/vaulted ceiling?
How do I cut the wedge piece that goes in the corner of a cathedral/vaulted ceiling? These instructions are for cutting your crown laying flat, face up on your compound miter saw. These instruction will
More informationInstallation Instructions and Ordering Information
The Flush Finish Door Jamb System Installation Instructions and Ordering Information Installation Instructions Step 1 Step 2 Ensure that the stud opening is square and level and measures: Single Door width
More informationSenior Swing. Caution
*740132* 740132 2800 Overhead Concealed Series 9500 Surface Applied Series Senior Swing Installation Instructions Caution LCN Senior Swing The Senior Swing Power Operator System is a low energy product
More information400 SERIES VERTICAL INSTALLATION
CI-DS-01-400V CI-PJ-01-400V CI-PJ-02-400V CI-PJ-03-400V CI-BS-01-400V CI-BS-02-400V CI-BS-03-400V CI-BS-04-400V CI-BS-05-400V CI-OC-01-400V CI-OC-02-400V CI-IC-01-400V CI-IC-02-400V CI-FO-01-400V CI-FO-02-400V
More informationGRILLE AND REGISTER OPTIONS AND ACCESSORIES
GRILLE ND REGISTER OPTIONS ND CCESSORIES PRODUCT OVERVIEW OPTIONS ND CCESSORIES FOR FSTENING ND MOUNTING FRMES Up to four methods of fastening available for most models. Sub-frame available for professionally
More informationWG-4 Wall Guard Installation Instructions
WG-4 Wall Guard Installation Instructions Architectural Products Division Step 1: Determine top of wall guard and snap a chalk line 1/8 below to locate top of aluminum retainer, see fig 1. Store material
More informationLINEAR GRILLES AND REGISTERS
LINEAR GRILLES AND REGISTERS Linear Grille ( Continuous type ) Linear Grille ( Flange type ) Linear Curved Grille INTRODUCTION COSMOS Linear Grilles and Registers covers a wide range for supply and return
More informationShetland Stalls Installation Instructions
Shetland Stalls Installation Instructions RAMM Horse Fencing and Stalls 13150 Airport Hwy. Swanton, OH 43558-9615 1-800-434-8456 Rev. 1/9/18 Before you start Kit can accommodate up to 12 wide stall front
More informationDublin Stalls Installation Instructions
Dublin Stalls Installation Instructions RAMM Horse Fencing and Stalls 13150 Airport Hwy. Swanton, OH 43558-9615 1-800-434-8456 Rev. 9/13/17 Part Identification Round Track Bracket (4) (Not Painted) Round
More information900 SERIES WALL PANELS
CI-DS-01-900 CI-PP-01-900 CI-PJ-01-900 CI-PJ-02-900 CI-PJ-03-900 CI-BS-01-900 CI-BS-02-900 CI-BS-03-900 CI-BS-04-900 CI-BS-05-900 CI-OC-01-900 CI-OC-02-900 CI-IC-01-900 CI-FO-01-900 CI-FO-02-900 CI-FO-03-900
More informationAssembly Instructions Nevins Phone Booth
Assembly Instructions Nevins Phone Booth Included Hardware Tools Required supplied by installer Drill & Bit Bolt A - (16) 1/4-20 x 1-1/2 hex head Bolt B - (20) 1/4-20 x 2-1/2 phillips head Screw 1 - (24)
More informationC-Series & S-Series Classic Frame with Transom (Single or Pair)
1. TOOLS REQUIRED Tape measure 6' magnetic level 3' magnetic level Safety Glasses Screw gun #2 Screwdriver tip #3 Screwdriver tip Philips Head screwdriver (Used to move frame on wall using oval slots on
More informationaluminium profile system
aluminium profile system 63 AME System aluminium profiles overview series profiles introduction 80x80 x80 x80/180 x Aluminium profiles are provided with longitudinal grooves which can be used in conjunction
More informationLaminate Cabinet Installation Instructions
Laminate Cabinet Installation Instructions www.easygaragestorage.com/installation How To Use These Instructions Thank you for your purchase! Please read each step of this manual thoroughly to ensure proper
More informationPortofino Installation Guide
vjul16 (for 17 or 24 mm Surface Wall Profiles) DO NOT ASSEMBLE WITHOUT FULLY READING THESE INSTRUCTIONS Page 2 Thank you for purchasing this Portofino shower enclosure. Please study these instructions
More informationInstallation Instructions for Converting Hinging on Roll-In Refrigerators
Installation Instructions for Converting Hinging on Roll-In Refrigerators Part number 161651 hinge conversion kit RH is for converting a right side hinged door and part number 161652 hinge conversion kit
More informationInstallation Instructions Palladium Wall Panels - Demountable Factory Finished Edges and Field Cut Edges
Please read all instructions before installing Palladium Wall Panel System. 1. Before installation: a. Acclimate Palladium Panels, reveals, adhesives and wall substrates to room temperature 24 hours before
More informationMONOGRAM 36" BUILT-IN ALL-FREEZER
OVERALL DIMENSIONS 36" (91.5) 23 7/8" (60.7) 2 3/4" (7.0) 25 7/8" (65.7) *84" (213.4) 30 1/2" (77.5) *8 (212.1) *73" (185.4) *32 1/4" (82.0) SPECIFICATIONS Overall Width Overall Height Overall Depth Door
More informationINSTALLATION INSTRUCTIONS DANUBE ACRYLIC NEO ANGLE
INSTALLATION INSTRUCTIONS DANUBE ACRYLIC NEO ANGLE March 2013 DOOR 2 Page 1 of 5 INSTALLATION INSTRUCTIONS NEO ANGLE 6MM FRAMELESS AND 4MM FRAMED SHOWER DOOR DANUBE, DELTA, SIGNATURE, OCEANIA, CASCADE
More informationATTRACTION drawer. Twin-walled seel drawer. Complete. 50 Kilos resistance. indamatic. Range of concealed runners up to. self closing and soft closing.
F U R N I T U R E F I T T I N G S M A N U F A C T U R E R Twin-walled seel drawer. Complete Range of concealed runners up to 50 Kilos resistance. indamatic self closing and soft closing. Double wall 405
More information1.1.1 The cube assembly has two filter retainer rings; one is located on the Exciter side and one is on the Emitter side as shown below.
1.1 Disassemble Cube 1.1.1 The cube assembly has two filter retainer rings; one is located on the Exciter side and one is on the Emitter side as shown below. Emitter Retaining Ring Exciter Retaining Ring
More information864 Double-Door Face. Compatibility: 864 TRV GS 864 HO. Packing List: Installation Details. Used on All Fireplaces
Compatibility: 864 TRV GS 864 HO Packing List: 864 ST Used on All Fireplaces Doors Faceplate Baffle Hinge Pins Magnets (shipped on doors) Faceplate #8 x 3/8 Sheet Metal Screws Upper and Lower Grills Installation
More informationAssembly Instructions Nevins Phone Booth
Assembly Instructions Nevins Phone Booth Included Hardware Tools Required supplied by installer Drill & Bit Socket Wrench Bolt A - (16) 1/4-20 x 1-1/2 hex head Bolt B - (20) 1/4-20 x 2-1/4 phillips head
More informationGambrel Barn Construction Manual 8x8 through 16x24 Units
Gambrel Barn Construction Manual 8x8 through 16x24 Units Tools Needed: Cordless drill (12V or higher) #2 square drive bit Hammer 6 step ladder Tape measure Square utility knife w/ blade & hook blade Little
More informationMONOGRAM 36" BUILT-IN ALL-FREEZER
OVERALL DIMENSIONS 36" (91.5) 25 3/4" (65.4) 23 7/8" (60.7) 2 3/4" (7.0) *84" (213.4) *73 1/4" (186.1) *8 (212.1) 64 1/4" (163.2) SPECIFICATIONS Overall Width Overall Height Overall Depth Door Clearance
More informationDESIGN TRIPLE PANE BATH SCREEN
DESIGN TRIPLE PANE BATH SCREEN DBTSC1500 INSTALLATION INSTRUCTIONS IMPORTANT - Please read before installation Please read these instructions carefully before starting installation and keep in a safe place
More informationDeauville Installation Guide
vjul16 (for Recessed Wall Profiles) DO NOT ASSEMBLE WITHOUT FULLY READING THESE INSTRUCTIONS Page 2 Thank you for purchasing this Deauville shower enclosure. Please study these instructions carefully before
More informationTools needed. Supplies Needed
Installation Guide Key System Components Main beam Cross tee Tools needed Chalk line Drill (cordless) ¼" drill bit Hammer Miter saw Pencil String line(s) Stud finder Tape measure ½" to 1" wood chisel Calculator
More informationM4 Hex Nut [ ] M4 T-Nut 20 [20-044] Appx. 1. 3mm. 20 Series profiles (1 per hole) (1 per hole) Ordering Information
Handles & Light Duty PA 20 1 Assembly of Hinge M4x8 FHCS [24-208-4] M4 T-Nut 20 [20-044] M4 Hex Nut [24-706-4] 60 300-0 PA 20 on panel 2 Hinge positions 3-4 Clearance dimensions 5 Range of swing FOR M4
More informationINSTALLATION INSTRUCTIONS Frames and Entrance Doors
INSTALLATION INSTRUCTIONS Frames and Entrance Doors J 3010 Rice Mine Road, Tuscaloosa, Alabama 35406 1-800-772-7737 Fax 1-800-443-6261 www.coralind.com A Division of Coral Industries, Inc. FRAMES and ENTRANCES
More informationSystem 3000 specifications
System 3000 specifications Scope: Materials: Type of Bookstack: This specification covers delivery and installation of steel library shelving of the bracket type. Height, depth and accessories shall be
More informationTradewinds Amplify Display System Instructions
Table of Contents Packing & Unpacking... Standard Kits... Component Identification... Primary Components Vertical Pole Top... Vertical Pole Bottom... Horizontal... Cross/Hanging Bar... Amplify Shelf Package
More informationB Connectors. Automation. Structural Framing System Connectors & Fasteners
BContents B Connectors Gussets... 2 End Fasteners... 4 Anchor Fasteners... 5 Angle Brackets... 6 45 Support Brackets... 8 Butt Fasteners... 9 Hinged Support Brackets... 10-13 Joining Plates... 14-18 Nuts
More informationINSTRUCTION SHEET U19
U19 All Refrigerator and All Freezer Trim Kit Installation Product Line: U19 All Refrigerator and All Freezer Models Parts Included in Kit TRIMKITEZ1 (Part# 297333500): Single Trim Kit Components Single
More informationMANUAL INSTALLATION. Linear Bar Grille - Heavy Duty LBPH/LBMH. v000 Issue Date: 09/17/ Price Industries Limited. All rights reserved.
MANUAL INSTALLATION Linear Bar Grille - Heavy Duty LBPH/LBMH v000 Issue Date: 09/17/18 2018 Price Industries Limited. All rights reserved. TABLE OF CONTENTS Product Overview Overview...1 Before You Start...2
More informationSTOP. V00029AC Rev. 04 READ ALL OF THE FOLLOWING INSTRUCTIONS BEFORE REMOVING CABINET FROM SKID TOOL LIST. NET-ACCESS S-Type Network Cabinets
Rev. 04 STOP READ ALL OF THE FOLLOWING INSTRUCTIONS BEFORE REMOVING CABINET FROM SKID NET-ACCESS S-Type Network Cabinets -Phillips screwdriver -Flatblade screwdriver -22mm socket wrench -15mm socket wrench
More informationPortofino Case2 Installation Guide
Portofino Case2 Installation Guide vjun16 (for 17 or 24 mm Surface Wall Profile) DO NOT ASSEMBLE WITHOUT FULLY READING THESE INSTRUCTIONS Page 2 Thank you for purchasing this Portofino Case 2 shower enclosure.
More informationDeauville Installation Guide
vjul16 (for 17 or 24 mm Surface Wall Profiles) DO NOT ASSEMBLE WITHOUT FULLY READING THESE INSTRUCTIONS Page 2 Thank you for purchasing this Deauville shower enclosure. Please study these instructions
More informationRH-412 STEEL DOORS INSTALLATION INSTRUCTIONS
RH-412 STEEL DOORS INSTALLATION INSTRUCTIONS By following the steps outlined below, the assembly, installation and adjustment of the steel doors, will be a simple process. Let s start with the Driver Side.
More informationV00029KX READ ALL OF THE FOLLOWING INSTRUCTIONS BEFORE REMOVING CABINET FROM SKID
READ ALL OF THE FOLLOWING INSTRUCTIONS BEFORE REMOVING CABINET FROM SKID Net-Verse D-Type Cabinets Tool List 10mm Socket Wrench 122mm (48 ) Level 19mm Wrench 8mm Hex Drive T25 Torx driver Net-Verse D-Type
More informationINSTALLATION INSTRUCTIONS RH 412 STEEL DOORS
By following the steps outlined below, the assembly, installation and adjustment of the steel doors, will be a simple process. Let s start with the Driver Side. Note: Having the hood open makes the job
More informationEURO (3876) Euro-C2 Installation Instructions Euro-Wall Systems, LLC
888.989.EURO (3876) www.euro-wall.com Euro-C2 Installation Instructions Installation Instructions Euro-C2 step A.1) Assemble Bottom corner Pre-caution: it is recommended to use screw wax to prevent screw
More informationLOW PRESSURE STEEL DUCTWORK Mechanical Systems Insulation Outlets (HVAC) Testing and Balancing.
SECTION 15841 LOW PRESSURE STEEL DUCTWORK PART 1 GENERAL 1.01 SUMMARY A. Related Sections: 1. 15180 - Mechanical Systems Insulation. 2. 15940 - Outlets (HVAC). 3. 15991 - Testing and Balancing. 1.02 SUBMITTALS
More informationUNLESS OTHERWISE SPECIFIED: DRAWN
DIY -2 20cm Goal DIY - Center Structure DIY -3 Ramp/Platform lso Needed: Rolling Goal set, am-2832 or am-2849 Game Ball set, am-2968 FRCTIONL /8 9/4/4 DIY5 DIY -0 SCLE: :24 Material Qty Needed DWG Using
More informationWOODWORKS Walls. Installation Instructions WALL
WALL Systems Between us, ideas become reality WOODWORKS Walls Installation Instructions 1. GENERAL 1.1. Product Description WoodWorks walls consist of 2' x 4', 2' x 8', 2' x 9' or 2' x 10' perforated and
More informationVersatrac Bypass Door Units, Conventional and Top Track, 300 and 400 Series
Versatrac Bypass Door Units, Conventional and Top Track, 300 and 400 Series TM Rough opening width (finished opening width plus 9/16") Notch for top track units (used as frame header) Rough opening height
More informationSTRAIGHT HANDLEBAR KIT
STRAIGHT HANDLEBAR KIT P/N 2881973 APPLICATION All straight bar applications, excluding 550 Indy and Voyageur models BEFORE YOU BEGIN Read these instructions and check to be sure all parts and tools are
More informationFunctional movement systems for furniture in offices and public buildings. SINGLE-JOINT HINGES
SINGLE-JOINT HINGES Functional movement systems for furniture in offices and public buildings. QUALITY CERTIFICATE Reduced to the essentials. For us, that means focusing on quality, design and function.
More informationPremium Single Dutch Doors Assembly & Installation Instructions
Premium Single Dutch Doors Assembly & Installation Instructions Premium Single Dutch Door Instructions General Notes; -Read the entire instructions before you begin. -Wear appropriate safety gear when
More informationXL JOINERY LTD LA PORTE VISTA MODULAR 3 ASSEMBLY INSTRUCTIONS
XL JOINERY LTD LA PORTE VISTA MODULAR 3 2090mm High x 4687mm Wide ASSEMBLY INSTRUCTIONS READ AND UNDERSTAND THESE INSTRUCTIONS FULLY PRIOR TO STARTING INSTALLATION. IT IS STRONGLY RECOMMENDED THAT A COMPETENT
More informationNX7 SERIES 5-1/2 HANDRAIL
STORAGE & HANDLING The handrails are shipped unassembled. Upon receipt, immediately check all material for any damage that may have occurred in transit and verify that all of the items and quantities are
More informationUltra Fast Delivery SGL Toilet Cubicle Pack Fitting Instructions
Ultra Fast Delivery SGL Toilet Cubicle Pack Fitting Instructions This instructional booklet should be read in full prior to undertaking any work. If in doubt please call Commercial Washrooms on 01202 650900,
More informationASS 70 FD folding/sliding door installation guide
ASS 70 FD folding/sliding door installation guide 2 Preparation IMPORTANT These doors should be fitted by competent and trained installers. Please read these instructions thoroughly before beginning the
More informationFold-A-Way Patio Door ASSEMBLY & INSTALLATION GUIDE
Fold-A-Way Patio Door ASSEMBLY & INSTALLATION GUIDE This instruction guide provides the minimum recommended procedures to correctly prepare the rough opening, install a fold-a-way patio door unit and apply
More informationINSTALLATION INSTRUCTIONS. Thermal Entrances AA 250/AA 425 THERMAL DOOR WITH TRIFAB 601/601T FRAMING
JANUARY, 2014 1 INSTALLATION Thermal Entrances AA 250/AA 425 THERMAL DOOR WITH TRIFAB 601/601T FRAMING INSTRUCTIONS 2 FRAME ASSEMBLY JANUARY, 2014 601442 SHEAR BLOCK BALL BEARING NRP BUTT (FACTORY APPLIED
More informationPORTA-FAB Cleanroom Wall Systems
PORTA-FAB Cleanroom Wall Systems FABLINE BATTEN 2000 INSTALLATION INSTRUCTIONS IMPORTANT Porta-Fab Advises A Thorough Reading of These Instructions Before Beginning Installation. INTRODUCTION Porta-Fab
More informationHANDLEBAR KIT P/N APPLICATION BEFORE YOU BEGIN KIT CONTENTS TOOLS REQUIRED. Instr Rev Page 1 of 6
HANDLEBAR KIT P/N 2881993 APPLICATION All straight bar applications, excluding 550 Indy and Voyageur models BEFORE YOU BEGIN Read these instructions and check to be sure all parts and tools are accounted
More informationDOOR KIT P/N APPLICATION BEFORE YOU BEGIN KIT CONTENTS. Instr Rev Page 1 of 6. Verify accessory fitment at Polaris.com.
DOOR KIT P/N 2882528 APPLICATION Verify accessory fitment at Polaris.com. BEFORE YOU BEGIN Read these instructions and check to be sure all parts and tools are accounted for. Please retain these installation
More informationASS 70 FD folding / sliding door. Installation Guide
ASS 70 FD folding / sliding door Installation Guide IMPORTANT! These doors should be fitted by competent and trained installers. Please read these instructions thoroughly before beginning the installation.
More informationInstallation Operation Care
Installation Operation Care Palm Beach Polysatin Shutters CONTENTS Getting Started Installation Overview...1 Unpacking...1 Tools and Materials Needed...1 Fasteners...2 Frame Assembly Assemble the Frame
More informationHolden Colorado Isuzu DMAX - RIDB1
Holden Colorado Isuzu DMAX - RIDB1 Fit Time: 1.5 Hours IMPORTANT INFORMATION Maximum carrying capacity: Suitable Pioneers On Road Cargo Allowance Off Road Cargo Allowance Static Allowance Roof Allowance
More information(Wood Door and Frame)
ITS961 and ITS965 Closer in Door Track in Frame (Wood Door and Frame) 1 (REFERENCE UNIT CARTON FOR ACCESSORIES AND OPTIONS SUPPLIED) Determine hand of door. Prepare door and frame according to template
More informationASSA ABLOY. Model W91 Overhead Concealed Wood Frame Installation Instructions IMPORTANT: BEFORE INSTALLING: TO DETERMINE HAND OF YOUR DOOR:
Model W91 Overhead Concealed s Wood Frame Installation Instructions *Butt or 3/4 Offset Pivot Hung, Multi Sized 1-3, 3-6 Non-Hold Open and Hold Open Models *Other means except 4-1/2" x 4-1/2" or 3/4" offset
More informationVersatrim Side-Snap Frame
Versatrim Side-Snap Frame net door width finished opening width rough opening width (finished opening width plus 1 1/2") Figure 1 Cross section of strike and hinge jambs The rough opening width is equal
More informationDoor Hinges Drill-in Hinges
Drill-in hinge StarTec Frame part For timber lining frames For rebated doors Maintenance-free friction bearing To use in combination with receiver Max. door weight: 40 kg Knuckle: Ø15 mm Drilling bit Ø7.2
More informationSubmittal Sheet COUNTERSUNK HOLES SDG SPIRAL DUCT GRILLE 1 7/8" (47) + 1 1/4" (32) - 3/4" (19) ( DUCT OPENING ) END GASKET NOM. LENGTH - 3/4" (19) OPTIONAL AIR SCOOP AIR SCOOP (ROD OPERATOR) NOM. LENGTH
More informationSmall 45 Roof Houses 1 or 2 Story 1 /24 th Scale Patterns
BA GARDEN TOWNS 45 Roof Houses 10" x 10" 1 or Story Scaled and easy to read patterns and instructions for wood houses. Yard and Garden Buildings Compatible with Garden Railroads or a delight for any child's
More informationPOLYBAG KIT JOINER STRAP FIXTURE TYPE ROLL OF DOUBLE SIDED TAPE REQUIRED FOR R/POSITION WALL ANGLES (SEE STEP 6) 12"LG U-ANGLE (3) U-CLIPS
STRAIGHT EXTENSION [SE] P/C PG. OF NOTES: STRAIGHT EXTENSIONS (SE) ARE INSTALLED AT ENDS OF ROW TO CLOSE OFF CEILING OPENING. A. FIXTURES MUST BE INSTALLED PRIOR TO ATTACHING STRAIGHT EXTENSIONS. B. STRAIGHT
More information40mm Thermoclick. Type II Class 1 Clear Satin Anodize - 201R1 (Mid Grade Commercial)
http://www.sundancesupply.com 40mm Thermoclick Type II Class 1 Clear Satin Anodize - 201R1 (Mid Grade Commercial) U-Profile 12' Lengths $39 Out System offers a complete set of extrusions and accessories
More informationThe Q Frame PROJECT. a picture frame with secrets created exclusively for the Router Forum
The Q Frame PROJECT a picture frame with secrets created exclusively for the Router Forum 007 OR RELEASE FPLANS APPROVED The Q Frame: Project Overview LIST OF MATERIALS Frame Sides & Face 3/4 x 5 1/2 x
More informationFORD TRANSIT VAN PANELS (2015+) 130 /148 WHEEL BASE LOW ROOF INSTALLATION INSTRUCTIONS
FORD TRANSIT VAN PANELS (2015+) 130 /148 WHEEL BASE LOW ROOF INSTALLATION INSTRUCTIONS RECOMMENDED TOOLS -Phillips #4 screwdriver -Phillips #3 screwdriver -Knife or scissors (optional) BEFORE BEGINNING
More informationIOM 004 Effective 3/29/04 Rev A. MULTI-VENT Laminar Flow Panels Installation Operation and Maintenance
IOM 004 Effective 3/29/04 Rev A MULTI-VENT Laminar Flow Panels Installation Operation and Maintenance Contents Batten Arrangements...3 Slip-On Battens...4 Ceiling Opening...5 Installation...5 Hanger Bracket
More informationLAKSHMI MACHINE WORKS LIMITED COIMBATORE , INDIA
Spare Parts Catalogue for Vario Clean LB9/2 Issue No. : 02 Month / Year : February 2016 Control No. : 63 194 10 00 Revision Date : Spinning System This Catalogue Belongs to the Mill : Order No. : Machine
More informationCOMPOSITE SIDING INSTALLATION GUIDE
CENTURY HOME LIVING COMPOSITE SIDING INSTALLATION GUIDE Read all instructions prior to installing any siding product. Failure to install and finish this product in accordance with all local building codes,
More informationWPS crew Doors Installation instructions
WPS-132-133 crew Doors Installation instructions ORDER OF INSTALLATION FOR A COMPLETE ENCLOSURE OF A CREW WPS (Weather Protection System) IS AS FOLLOWS: 1. Heater 2. Rear Thresholds - Right Hand & Left
More informationInstallation Instructions for Siding
Smart-Shingle TM System "The new smart way to install cedar shingles." - This Old House Installation Instructions for Siding V3.2 INSTALLATION GUIDE MARKS Shingle-Strip 0 1 2 3 4 5 6 7 8 9 10 11 12 13
More informationMANUAL INSTALLATION. Linear Bar Grille LBP. v000 Issue Date: 09/17/ Price Industries Limited. All rights reserved.
MANUAL INSTALLATION Linear Bar Grille LBP v000 Issue Date: 09/17/18 2018 Price Industries Limited. All rights reserved. TABLE OF CONTENTS Product Overview Overview...1 Before You Start...1 Getting Started...1
More informationINSTRUCTIONS FOR VARIABLE WORKTOP JIG MM
INSTRUCTIONS FOR VARIABLE WORKTOP JIG 250-1000MM Please read these following points carefully before cutting: 1. Before using the jig we recommend you practice a few joints with off-cuts of worktops or
More informationINSTALLATION INSTRUCTIONS SERIES 487 CENTER GLAZED WITH 1-1/2" TRIM OFFICE PARTITIONS
INSTALLATION INSTRUCTIONS SERIES 87 CENTER GLAZED WITH -/" TRIM OFFICE PARTITIONS Phone: (800) -6 Fax: (800) 58-7 crlaurence.com usalum.com crl-arch.com M056_Rev_D SERIES 87 OFFICE PARTITIONS CENTER GLAZED
More informationVIEW 1 BHRR MOUNTING HOLE LOCATIONS (SIDE VIEW) FRAME EXTRUSION "FINGERS" DETAIL A
.5 (APPROX.).500 (APPROX.).000 66.000 A B STANDARD -POST RACK (BHRR9, BHRR3 OR XDR8XX-XXX) SHOWN FOR REFERENCE ONLY VIEW BHRR MOUNTING HOLE LOCATIONS (SIDE VIEW) VIEW "FINGERS" "FINGERS". MOUNT THE RACK
More informationVigilant Cigar Humidor Vault. Assembly Instructions
Vigilant Cigar Humidor Vault Assembly Instructions Models: 1000, 1500, and 2000 Congratulations! You have purchased a superior cigar humidor. These humidors have been specifically designed to properly
More informationPEDESTAL INSTALLATION. Guidelines for installing adjustable height pedestals
BASIC REQUIREMENTS Irrespective of the type of pavers or tiles that will be installed over pedestals, the following basic requirement must be met. Decks must be designed not to exceed the load capacity
More informationPanel Grille Suspended Ceiling Installation Guide
Panel Grille Suspended Ceiling Installation Guide World Commerce Center 2000 Ring Way Road, St. Augustine, FL 32092 Phone: 800-227-8566 or 904-584-1400 www.rulonco.com Receipt and Storage: a. All material
More informationInstalling Electronic Media Storage Components into Lateral File Cabinets
Steelcase, Inc. Grand Rapids, MI 49501 U.S.A. 1-888-783-3522 Installing Electronic Media Storage Components into Lateral File Cabinets 830-CH-9 830-CH-12 830-CH15 836-CH-9 836-CH-12 836-CH-15 842-CH-9
More informationASSEMBLY INSTRUCTIONS FOR SL500A AND SL500AL
ASSEMBLY INSTRUCTIONS FOR SL500A AND SL500AL January 2013 The SL500A is a square upright glass cabinet with a single hinged lockable door. It has five adjustable shelves plus the base. It also has an optional
More informationTrebuchet Parts List and Overview
Trebuchet Trebuchet Parts List and Overview The trebuchet pictured above is armed and ready to throw an object. Pulling the pin out of the trigger allows the counterweight to fall. The long end of the
More informationASSEMBLY INSTRUCTIONS DIY WALL BED KIT QUEEN BI FOLD DOOR CABINET & MECHANISM. Tools Required For Assembly. 6.5mm Masonry Drill Bit
ASSEMBLY INSTRUCTIONS DIY WALL BED KIT QUEEN BI FOLD DOOR CABINET & MECHANISM Tools Required For Assembly No 2 & No 4 Phillips Head Screwdrivers No 2 Slot Head Screwdriver Hammer Electric Drill (Hammer
More informationTS93 STH. Surface applied door closer. Installation instructions: Pull side door mounted spring track Inverted closer with hold open (STH)
Surface applied door closer Installation instructions: Pull side door mounted spring track Inverted closer with hold open (STH) TABLE OF CONTENTS Closer overall Technical specifications Door template Size
More informationINSTALLATION GUIDE FOR METAL LABORATORY CASEWORK
LABORATORY Casework & Cabinets INSTALLATION GUIDE FOR METAL LABORATORY CASEWORK RDM Industrial Products, Inc. RDM LAB CABINET INSTALLATION GUIDE TABLE OF CONTENTS GENERAL INFORMATION...1 Freight Damage...1
More informationKS42 MF SERIES - HORIZONTAL INSTALLATION
CI-DS-01-KSMF H CI-PJ-01-KSMF H CI-PJ-02-KSMF H CI-PJ-03-KSMF H CI-PJ-04-KSMF H CI-PJ-05-KSMF H CI-PJ-06-KSMF H CI-PJ-07-KSMF H CI-PJ-08-KSMF H CI-PJ-09-KSMF H CI-PJ-10-KSMF H CI-PJ-11-KSMF H CI-PJ-12-KSMF
More information