6490, These perforated. ceiling returns feature a. square neck. Aluminum or steel perforated face. is available. 6600, 56600, 6600FR
|
|
- William Clark
- 6 years ago
- Views:
Transcription
1 C1 Table of Contents 1, 15 51, 515 feature a neck mounted rotatable core with either a round or square neck. Aluminum or steel perforated face is, 5 R, supply, ceiling diffusers feature neck mounted curved blades with a square neck. Aluminum is ire rated or filter return variations 5, 55 5R, 5R supply, ceiling diffusers feature neck mounted curved blades with a round neck. Aluminum is ire rated supply and return variations 3 This perforated supply, ceiling diffuser features face mounted deflectors and a prescored fiberglass backpan for field cutting. Available in steel construction only. 3 This perforated return features a prescored fiberglass backpan for field cutting. Available in steel construction only. 4, 54, 4R feature face mounted deflectors with a square neck. Aluminum or steel perforated face as well as a fire rated variations are 4, 54 ceiling returns feature a square neck. Aluminum is, 5, R feature face mounted deflectors with a round neck. Aluminum or steel perforated face is A fire rated variation is also, 5 ceiling returns feature a round neck. Aluminum is 7, 57 These aluminum or steel perforated screen ceiling panels with no backpan are great for nonducted return or exhaust applications. 11, 511 These architectural, perforated, supply ceiling diffusers feature neck mounted curved blades with a square or rectangular neck. Available in steel or aluminum construction. A metric version is also 11, 511 These architectural, perforated, ceiling returns feature a square or rectangular neck. Available in steel or aluminum construction. 1, 51 (Supply) 15, 515 (Supply) Introduction...C14 Dimensional Information & rame Styles.. C15 Reference Charts...C1 Performance Data...C1 Engineering Specifications...C111, 5, R (Supply) R, (Return) Introduction...C11 Dimensional Information...C113 rame Styles...C114 Reference Charts...C117 Performance Data...C11 Engineering Specifications...C141 5, 55, 5R (Supply) 5R (Return) Introduction...C11 Dimensional Information...C18 rame Styles...C1 Reference Charts...C131 Performance Data...C133 Engineering Specifications...C143 3 (Supply) 3 (Return) Introduction...C145 Dimensional Information...C14 Reference Charts...C14 Performance Data...C148 Engineering Specifications...C151 4, 54, 4R (Supply) 4, 54 (Return) Introduction...C15 Dimensional Information...C153 rame Styles...C155 Reference Charts...C158 Performance Data...C1 Engineering Specifications...C13, 5, R (Supply), 5 (Return) Introduction...C15 Dimensional Information...C175 rame Styles...C177 Reference Charts...C18 Performance Data...C18 Engineering Specifications...C15 C1 Excellence in Air Distribution KRUEGER 1
2 C1, 5 Curved Blade Introduction:, 5 Series (Supply) 4 (Return) See page C15 for more information. The /5 series perforated diffusers use bladetype pattern deflectors mounted on the backpan and are available in preselected 1,, 3, or 4way blow patterns. Individually adjustable curved blades allow field adjustment of the air pattern in each direction, which may be field set to any position between a vertical throw and a tight ceiling, long throw pattern. The pattern deflectors on the backpan create aspiration of secondary air through the perforated face where it is mixed with primary air that is then discharged through the perforated face. This aspiration and mixing effect reduces the discharge air temperature to avoid cold air drafts. Additionally, it removes smudging material from the secondary air by impingement on the perforated face. Ceiling smudging of adjacent, hard to clean ceiling surfaces is greatly reduced. The /5 series diffusers exhibit typical isothermal throws of 8 to for 4way air distribution and 1 to 5 for 1way air distribution making this diffuser an excellent choice for irregular room shapes. Matching returns are the 4 and series. MODELS Steel Construction, Square Neck, Supply Diffuser R ire Rated, Steel Construction, Square Neck, Supply Diffuser Steel Construction, Designed for Standard x x1 ilter (By Others), Square Neck, ilter Return R ire Rated, Steel Construction, Square Neck Return 5 Aluminum Perforation with Steel Backpan, Square Neck, Supply Diffuser 5 Steel Construction, Round Neck, Supply Diffuser 5R ire Rated, Steel Construction, Round Neck, Supply Diffuser 55 Aluminum Perforation with Steel Backpan, Round Neck, Supply Diffuser 5R ire Rated, Steel Construction, Round Neck Return 5 (Supply) (Return) See page C15 for more information. EATURES Individually adjustable curved blade pattern deflectors for horizontal to vertical throw. Variety of air discharge patterns Removable perforated face and core for easy cleaning. PANEL SIZES 1 x1 x 4 x4 1 x1 1 x4 4 x48 5 ACCESSORIES Optional Round Damper Optional Opposed Blade Damper (Model OBD) Optional Straightening Grid Optional Insulated Backpan INISHES Standard finish is #44 British White. Optional finishes KRUEGER 1 C11 Excellence in Air Distribution
3 C1 (ilter rame Return) Dimensional Information & rame Styles Curved Blade, ilter rame, ACE VIEW (4 x4 PANEL), HINGE DETAIL NOMINAL " x " PROVIDED, RAME, SURACE MOUNT, RAME CROSS SECTION SPRING RETAINER CEILING OPENING PANEL SIZE PLUS 1/8" (3) 1 7/8" (55) 5" (35) 3/1" (5), RAME 3, LAYIN TBAR, RAME 3 CROSS SECTION TBAR 1 7/8" (55) 7/1" (11) 3 3/4" (3), RAME 3, DROP ACE, RAME 7 CROSS SECTION TBAR 1 7/8" (55) 7/1" (11) 3 3/4" (3) 3/8" (1) NOTE: Dimensions in parentheses are mm. KRUEGER 1 Providing You With Air Distribution Solutions C115
4 (ilter rame Return) Performance Data C1 Curved Blade, ilter rame IP/METRIC DATA: RETURN, x NECK, 4 x4 PANEL ONLY (NO DAMPER) Neck Vel IP Data Air Pv low Ps Neck Vel Metric Data Air Pv low Octave Band, db NC PM CM "WG "WG m/s L/s Pa Pa " x " NOTES: NC values are based on octave band 7 sound power levels minus a room absorption of 1dB, re 1 1 Watts. Dash in space denotes a NC or db value of less than 1. Data was obtained from tests conducted in accordance with ANSI/ASHRAE Standard 7, ISO Standard 51, and ISO Standard See Krueger s selection software for performance data not shown, including octave band data. Ps KRUEGER 1 Providing You With Air Distribution Solutions C17
5 C1, 5, Curved Blade, 5, (Supply/ilter rame Return) Suggested Specification & Configuration KRUEGER 1 1. SERIES: (XXXXX) Square Neck, Steel Perforated Supply Diffuser with Backpan Mounted Adjustable Curved Blades 5 Square Neck, Aluminum Perforated ace, Steel Backpan Supply Diffuser with Backpan Mounted Adjustable Curved Blades Square Neck, Steel Perforated ilter rame Return. PATTERN: (XXX) 1 1Way Way 3 3Way 4 4Way C Way Corner Steel ilter rame Return 3. DIM 1 x DIM : (XX)x(XX) * x 8 x8 1 x1 1 x1 14 x14 1 x1 x ( Only) 4. RAME: (XXX) ** Surface Mount 3 Layin TBar 7 Spline 3 Drop ace 8 NarrowT 5. PANEL: (XX)x(XX) 1 x1 1 x1 1 x4 x 4 x4 4 x48. ACCESSORIES: (XX) None IB Insulated Backpan 7. INISH: (XX) 1 Mill 3 Black Backpan with British White ace 1 Alumican 35 Black 44 British White * See chart on page C113 for available neck sizes. ** When specifying, neck dimensions must be x with 4 x4 panel and frames, 3, or 3. SAMPLE CONIGURATION: 4 1x1 3 4x4 44, 5 The perforated face supply diffuser shall be Krueger model (steel perforated face) or 5 (aluminum perforated face). The diffusers shall have a perforated face with 3/1 diameter holes on 1/4 centers resulting in a 51% free area. The diffuser backpan shall be constructed of heavy gage steel and provide a square neck. The diffuser shall have individually adjustable curved blade deflectors mounted at the neck of the diffuser. The curved blade deflectors shall allow vertical or 1,, 3, or 4way horizontal projection of air in to the room. The perforated face must be easily removable from the backpan for access to the adjustable curved blades for adjustments and access to the damper. Optional opposedblade damper (OBD) shall be constructed of heavy gage steel. Damper shall be operable from the face of the diffuser. The perforated face return diffuser shall be Krueger model (steel perforated face). The diffusers shall have a perforated face with 3/1 diameter holes on 1/4 centers resulting in a 51% free area. The diffuser backpan shall be constructed of heavy gage steel and provide a square or neck. The unit must be able to accept a x x1 filter. The return diffuser shall match the Krueger model (steel perforated face) supply diffuser in appearance. The perforated face must be easily removable from the backpan for access to the filter (by others). Optional opposedblade damper (OBD) shall be constructed of heavy gage steel. Damper shall be operable from the face of the diffuser. PERORMANCE The manufacturer shall provide published (printed or electronic) performance data for the diffuser. Performance data shall include 7 octave band sound power levels. The diffuser shall be tested in accordance to the data standards at the time of product introduction or ANSI/ASHRAE Standard 7. INISH The paint finish shall be #44 British White and be an anodic acrylic paint, baked at 315 for 3 minutes. The paint thickness shall be.8 1. mils, gloss at per ASTM D538 of 5 85%, pencil hardness per ASTM D333A of HB H, crosshatch adhesion per ASTM D33583 of 4B 5B, impact per ASTM D743 of direct impact >1 in/lb and reverse impact >8 in/lb, salt spray per ASTM B11748 of hours, humidity per ASTM D47 of >5 hours and water soak per ASTM D87 of 5 hours. Providing You With Air Distribution Solutions C141 5
LINEAR DIFFUSERS AND BAR GRILLES
Model 49-240 Model 48LL1 Model 49-280 Model 49-480 Model 48LL2 Linear ar Grilles The Nailor 4900 Series provides an extruded aluminum bar grille that offers beautiful styling and efficient performance.
More informationNOTES: Dimensions in parentheses are mm. For 1600 grille length and width dimensional information, see table on page K1-25.
K, / Blade Thickness Dimensional Information & Frame Styles, FACE VIEW FOR FRAME STYLES A, B, C, AE, BE, CE, DS, & RG 7/" (22) 9" (229) MAX For grille length and width dimensional information, see table
More informationGRILLES AND REGISTERS
Airfoil Blade Return Air Models 71FH, 7145H 45 Deflection, 3/4" (19) Blade Spacing The airfoil blades are fixed at a 45 angle. This grille is vision proof when installed in a low or high sidewall location
More informationSCD, ASCD Square Cone Diffuser CM = CEILING MODULE CEILING OPENING D = DUCT SIZE. OD = D - 1/8" (3mm)
SCD, ASCD Square Cone Diffuser CM = CEILING MODULE CEILING OPENING D = DUCT SIZE OD = D - 1/8" (3mm) MIN. 1" (25mm) A Optional 4th Cone STANDARD CONSTRUCTION: SCD - Steel construction ASCD - Aluminum construction
More informationSubmittal Sheet COUNTERSUNK HOLES SDG SPIRAL DUCT GRILLE 1 7/8" (47) + 1 1/4" (32) - 3/4" (19) ( DUCT OPENING ) END GASKET NOM. LENGTH - 3/4" (19) OPTIONAL AIR SCOOP AIR SCOOP (ROD OPERATOR) NOM. LENGTH
More informationCEILING DIFFUSERS GENERAL PRODUCT OVERVIEW
GENERL PROUCT OVERVIEW Ceiling iffusers Quality ssured Products, unobtrusive clean lines for appearance, careful engineering and professional workmanship with the backing of an industry leader - these
More informationGRILLE AND REGISTER OPTIONS AND ACCESSORIES
GRILLE ND REGISTER OPTIONS ND CCESSORIES PRODUCT OVERVIEW OPTIONS ND CCESSORIES FOR FSTENING ND MOUNTING FRMES Up to four methods of fastening available for most models. Sub-frame available for professionally
More informationLINEAR AIR GRILLE LF - 202/LF 212 / LF / LF ACCESSORIES
TYPE LF - 202/LF 212 / LF 202-2 / LF 212-2 LINEAR AIR GRILLE ACCESSORIES DESCRIPTION The linear air grilles of LF-202, LF-212 series are suitable for installation on walls, ducts and false ceilings. The
More informationPerformance Data. Single Deflection Register, DDFRSDS 5 Double Deflection Register, DDFRDDS 5
An enterpise of United McGill Corporation Founded in 1951 Single Deflection Register, DDFRSDS 5 Double Deflection Register, DDFRDDS 5 Average discharge velocity (fpm) 300 400 500 600 700 800 900 1000 1100
More informationStandard Practices for Producing Films of Uniform Thickness of Paint, Varnish, and Related Products on Test Panels 1
Designation: D 823 95 (Reapproved 2001) Standard Practices for Producing Films of Uniform Thickness of Paint, Varnish, and Related Products on Test Panels 1 This standard is issued under the fixed designation
More informationModel ABV Pressure Independent Automatic Balancing Valve. Application: Standard Construction: Performance: Configurations Available:
Application: Tag: Project: Location: Date: Engineer: Contractor: Architect: Submitted by: The ABV Automatic maintains a constant airflow volume in HVAC applications. The highly engineered damper blade
More informationINSTALLATION & OPERATION MANUAL ML-37 / ML-38 / ML-39 MLR-37 / MLR-38 / MLR-39. Redefine your comfort zone.
INTALLATION & OPERATION MANUAL ML-37 / ML-38 / ML-39 MLR-37 / MLR-38 / MLR-39 IOM Linear lot Ceiling Diffusers Factory Cut upply ML-37 ML-38 ML-39 Factory Cut Return MLR-37 MLR-38 MLR-39 Factory pacer
More informationLINEAR GRILLES AND REGISTERS
LINEAR GRILLES AND REGISTERS Linear Grille ( Continuous type ) Linear Grille ( Flange type ) Linear Curved Grille INTRODUCTION COSMOS Linear Grilles and Registers covers a wide range for supply and return
More informationCOLIBRITM. Ceiling. Square ceiling diffuser with discs for supply air. Quick guide
COLIBRITM Ceiling Square ceiling diffuser with discs for supply air Quick facts Adjustable discs flexible spread pattern Can be used for vertical air diffusion Swirl function Also available in the exhaust
More informationCSP PSYCHIATRIC SERVICES UNIT SECTION IDENTIFICATION FOR HVAC PIPING AND EQUIPMENT
SECTION 23 05 53 IDENTIFICATION FOR HVAC PIPING AND EQUIPMENT PART 1 GENERAL 1.1 SUMMARY A. Section Includes: 1. Pipe Markers. 2. Valve Tags. 3. Equipment Nameplates. 4. Underground Marking Tape. 5. Duct
More informationCOLIBRI Ceiling. Square ceiling diffuser with discs for supply air QUICK FACTS
Square ceiling diffuser with discs for supply air QUICK FACTS Adjustable discs flexible spread pattern Can be used for vertical air diffusion Swirl function Also available in the Extract air version Designed
More informationDuctwork Controls and Instrumentation Outlets (HVAC) HVAC Control System.
SECTION 15910 DUCT ACCESSORIES PART 1 GENERAL 1.01 SUMMARY A. Related Sections: 1. 15890 - Ductwork. 2. 15900 - Controls and Instrumentation. 3. 15940 - Outlets (HVAC). 4. 15970 - HVAC Control System.
More informationPRODUCT DATA CATALOG
PRODUCT DATA CATALOG CONTENTS PAGE STANDARD ELEVATIONS 2 STANDARD ELEVATIONS 3 DOOR SPECIFICATIONS 4 LOUVER SPECIFICATIONS 5 GLAZING SPECIFICATIONS 5 DOOR HANDING CHART 6 CLINE STANDARD HARDWARE LOCATIONS
More informationGLASSvent TM Windows for Storefront Framing
MARCH, 05 GLASSvent TM Windows for Storefront Framing INDEX PROJECT-OUT WINDOW... 3-8 OUTSWING CASEMENT WINDOW... 9-4 LAWS AND BUILDING AND SAFETY CODES GOVERNING THE DESIGN AND USE OF GLAZED ENTRANCE,
More informationAMDL - Aluminum Linear Louver Face Diffuser Submittal Sheet OVERALL DIFFUSER = NOM. + 5.750 (146) NECK OVERALL = NOM. -.125 (3) NOM. DCUT OVERALL DIFFUSER = NOM. + 5.750 (146) 2.094 (53) TYPE 1 SURFACE
More informationthe same information given in two different 1. Dimensions should NOT be duplicated, or Dimension Guidelines Incorrect ways.
Dimension Guidelines 1. Dimensions should NOT be duplicated, or the same information given in two different ways. Incorrect 1. Dimensions should NOT be duplicated, or the same information given in two
More informationBarofor Round System (polyester coated) Panels, Posts, Accessories
1 Scope This Technical Data Sheet specifies the requirements for the Barofor Round System. The complete system exists of: Panels Posts Accessories such as fixation system and posts caps. Panels and posts
More informationANSI/BHMA A Revision of ANSI/BHMA A
ANSI/BHMA A156.26-2012 Revision of ANSI/BHMA A156.26-2006 AMERICAN NATIONAL STANDARD FOR CONTINUOUS HINGES SPONSOR BUILDERS HARDWARE MANUFACTURERS ASSOCIATION, INC. Revision B 2/15/2017 Formatted: Centered
More informationUNIVERSITY SERVICES ANNEX James Madison University Harrisonburg, Virginia State Project Code: Architect s Project Number:
SECTION 230553 - IDENTIFICATION FOR HVAC PIPING AND EQUIPMENT PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Provisions of the Contract and of the Contract Documents apply to this Section. 1.2 SUBMITTALS A.
More informationFactory Assistance: Phone: Fax: Page 1
CABLE RUNWAY ACCESSORIES Radius Drop / Stringer Drop Provides 3 bend radius Radius drop fits 6, 12 and 18 runway made from 1-1/2 x 3/8 tubing Steel construction Includes (3) cable spools, (1) bolt, (1)
More informationDesign and Construction Standards SECTION ATHLETIC LOCKERS
SECTION 10505 ATHLETIC LOCKERS PART 1 GENERAL 1.1 RELATED DOCUMENTS A. The provisions of the General Conditions, Supplementary Conditions, and the Sections included under Division 1, General Requirements,
More informationFinishes FINISHES DESIGNATIONS...2 PAINTED FINISHES...3, 4 STANDARD HARDWARE FINISH OFFERINGS...5, 6 JANUARY, 2017 EC INDEX
JANUARY, 2017 INDEX 1 FINISHES DESIGNATIONS...2 PAINTED FINISHES...3, 4 STANDARD HARDWARE FINISH OFFERINGS...5, 6 LAWS AND BUILDING AND SAFETY CODES GOVERNING THE DESIGN AND USE OF GLAZED ENTRANCE, WINDOW,
More informationSECTION IDENTIFICATION FOR HVAC PIPING AND EQUIPMENT
SECTION 230553 - IDENTIFICATION FOR HVAC PIPING AND EQUIPMENT PART 1 GENERAL 1.1 SECTION INCLUDES A. Nameplates. B. Tags. C. Stencils. D. Pipe Markers. 1.2 RELATED REQUIREMENTS A. Section 099123 - Interior
More informationCONNOLS-AIR. AIR TERMINAL UNITS Engineered for Versatile Application and Energy Conservation
CONNOLS-AIR AIR TERMINAL UNITS Engineered for Versatile Application and Energy Conservation Marina Bay Business District is considered the trendiest and most technologically advance area for business in
More informationPRODUCT DATA CATALOG
PRODUCT DATA CATALOG CONTENTS PAGE STANDARD ELEVATIONS 2 STANDARD ELEVATIONS 3 DOOR SPECIFICATIONS 4 LOUVER SPECIFICATIONS 5 GLAZING SPECIFICATIONS 5 DOOR HANDING CHART 6 CLINE STANDARD HARDWARE LOCATIONS
More informationCBT 70J-1. Beamwidth Technology Two-Way Line Array Column with Asymmetrical Vertical Coverage
CBT 7J-1 Constant Beamwidth Technology Two-Way Line Array Column with Asymmetrical Vertical Coverage Key Features: Asymmetrical vertical coverage sends more sound toward far area of room to make front-toback
More informationKitchen exhaust fan GLEB
Kitchen exhaust fan GLEB Contents Kitchen exhaust fan - GLEB...3 Performance Data...4 Dimensions...5 Wiring diagram...6 General description...7 Applications...7 Demand control ventilation...7 Quiet operation...7
More informationNK / NL series. Rectangular VAV and CAV air volume control terminals
NK / NL series Table of contents Description Page Type designation 1 Technical data - General 2 - Specification 3 - Installation instruction 3 Model overview / dimensions 4-5 Sound data NKOAOOB / NLOAOOB
More informationUNIFIED FACILITIES GUIDE SPECIFICATIONS
USACE / NAVFAC / AFCEC / NASA UFGS-08 51 69.10 (April 2006) ----------------------------- Preparing Activity: NAVFAC Replacing without change UFGS-08582 (August 2001) UNIFIED FACILITIES GUIDE SPECIFICATIONS
More informationPRODUCTS STANDARD FINISHES FINISHES ADVANCING THE SCIENCE OF AIR DISTRIBUTION. Redefine your comfort zone.
A I R D I S T R I B U T I O N PRODUCTS ADVANCING THE SCIENCE OF AIR DISTRIBUTION 02 FINISHES STANDARD FINISHES Redefine your comfort zone. www.titus-hvac.com Rethink what air management systems can be.
More informationWoven Steel Wire Fence Type-47. Under the state specification for fencing, ASTM A 116 is called out.
Woven Steel Wire Fence Type-47 Under the state specification 710.02 for fencing, ASTM A 116 is called out. Go to the steel and fencing certification manual for more information about the basic properties
More informationManually adjustable blades Return air VAV cooling only VAV cooling and warm up heating TF-D TF-RA TB-C TB-CW
FORM 10.3 REV 0407 THERM-FUSER THERMLLY POWERED VV DIFFUSER CEILING PPROCHES MODULR VV SYSTEMS Models: TF-C VV cooling only. TF-CW VV cooling and warm up heating TF-HC VV cooling and VV heating TF-D TF-R
More informationW8CT. touring and professional. Dedicated longthrow high-mid / HF enclosure. features. applications
features! Dedicated longthrow high-mid/hf enclosure! Very high SPL capability! Constant 55º horizontal dispersion! Load certified MAN flying points applications! Live sound open-air venues Throwing high
More informationSUBMITTAL SHEET. Project Submittals by
Galvanized Tie Wire and Hanger Wire Submittal of Product Performance SUBMITTAL SHEET Project Submittals by GRABBER CONSTRUCTION PRODUCTS, INC. Submittal Date: Contract Number: Project Name: Section Number:
More informationGENERAL PURPOSE RECESSED DOWNLIGHT ACCESSORIES
2 GENERAL PURPOSE RECESSED DOWNLIGHT ACCESSORIES 1 13 GENERAL PURPOSE RECESSED DOWNLIGHT ACCESSORIES 4 1 2-PIN CFL 2 4-PIN CFL 3 MR16 LAMP 4 MR16 FILTERS APPLICATIONS RESIDENTIAL AND ARCHITECTURAL APPLICATIONS
More informationnot overpower the audience just below and in front of the array.
SPECIFICATIONS SSE LA Description Designed for use in permanent professional installations in churches, theaters, auditoriums, gyms and theme parks, the SSE LA is a dual-radius dius curved line array that
More informationFLOWLINE LINEAR DIFFUSERS
FLOWLINE LINER DIFFUSERS 1 FLOWLINE LINER DIFFUSERS Contents Overview of FlowLine System Continuous FlowLine Linear FL Series orizontal igh Throw Pattern Controllers FLV Series Vertical Jet Throw Pattern
More informationSECTION MECHANICAL IDENTIFICATION
PART 1 GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions Specification Sections, apply to this Section. B. Related Sections:
More informationLOW PRESSURE STEEL DUCTWORK Mechanical Systems Insulation Outlets (HVAC) Testing and Balancing.
SECTION 15841 LOW PRESSURE STEEL DUCTWORK PART 1 GENERAL 1.01 SUMMARY A. Related Sections: 1. 15180 - Mechanical Systems Insulation. 2. 15940 - Outlets (HVAC). 3. 15991 - Testing and Balancing. 1.02 SUBMITTALS
More informationM1.0 MECHNANICAL FLOOR PLAN
GENERAL NOTES A. CONTRACTORS AND SUB CONTRACTORS SHALL CAREFULLY REVIEW THE CONSTRUCTION DOCUMENTS. INFORMATION REGARDING THE COMPLETE WORK IS DISPERSED THROUGHOUT THE DOCUMENT SET AND CANNOT BE ACCURATELY
More informationDETAIL LOCATOR PRODEMA EXPOSED FASTENER SYSTEMS ON STUD WALL. Page: 00 of 22
PRODEMA EXPOSED FASTENER SYSTEMS ON STUD WALL D Da Db J L M A K E P C Ca K G N Q B R H F O DETAIL LOCATOR Page: 00 of Galiano Street, nd Floor Coral Gables, FL, Main (0) - 0 LEGEND DETAILS TABLE OF CONTENTS
More informationSymphony II Adaptable Table System
Symphony II Adaptable Table System 1.00 General 1.01 Conditions 1.02 Scope of work 1. This section covers all materials, equipment, tools and labor for the supply and installation of the laboratory Symphony
More informationCONTROL Room. Room product for Swegon s WISE system for demand-controlled ventilation. Quick facts Room control against temperature, CO 2
Room product for Swegon s WISE system for demand-controlled ventilation Quick facts Room control against temperature, CO 2, content, etc. Static pressure and flow measurement Position-independent Shut-off-capable
More informationPROJECT LOCATION SECTION PREFINISHED STEEL DOOR FRAMES
SECTION 08 1213.17 PART 1 - GENERAL 1.01 SECTION INCLUDES A. Prefinished steel door frames. B. [Sidelites] [, borrowed lites] [, and transom] assemblies. 1.02 RELATED REQUIREMENTS A. Section 06 2000 Finish
More informationSECTION AIR DISTRIBUTION SYSTEM
SECTION 23 30 00 AIR DISTRIBUTION SYSTEM PART 1 - GENERAL 1.1 Scope of Work: The work covered by this section consists of providing all labor, equipment and materials and performing all operations necessary
More informationARCHITECTURAL AND IMAGE DISPLAY SIGN SYSTEM
ARCHITECTURAL AN IMAGE ISPLAY SIGN SYSTEM A unique collection of 6063T5 alloy anodizing quality aluminum sign extrusions, engineered to perform throughout the many phases of a sign project. PHPlus Architectural
More informationPRESTON HEALTH SERVICES ARCHITECT S NO. 2700
SECTION 23 3113 - LOW PRESSURE DUCTWORK PART 1 - GENERAL 1.1 SCOPE OF WORK: A. The work required under this section includes all work necessary for a complete installation of ductwork and accessories.
More informationRound Duct and Fittings. Standards and Dimensional Data for Air Duct and Fittings
Round Duct and Fittings Standards and Dimensional Data for Air Duct and Fittings www.airsidesheetmetal.com 973-786-6967(office) 973-786-6474(fax) Fabricated by Airside Sheet Metal Fabricators, Inc. - 2017
More informationSPECIFICATION FOR HORIZONTAL AIRFLOW OUTDOOR RESISTIVE LOAD BANK
SPECIFICATION FOR HORIZONTAL AIRFLOW OUTDOOR RESISTIVE LOAD BANK PART 1.0 GENERAL 1.1 SCOPE A. This specification contains the minimum requirements for the design, manufacture and testing of a UL listed,
More informationMETRIC FASTENERS 1520 METRIC FASTENERS
1520 METRIC FASTENERS METRIC FASTENERS A number of American National Standards covering metric bolts, screws, nuts, and washers have been established in cooperation with the Department of Defense in such
More informationPROCESS SPECIFICATION SURFACE FINISH REQUIREMENTS
3260 East Universal Way Tucson, Arizona 85756 PROCESS SPECIFICATION SURFACE FINISH REQUIREMENTS PS00000020 DATE OF ISSUE 08/14/2015 REVISION 02 PROPRIETARY NOTICE This document is not to be distributed
More informationCIRCULAR VAV UNITS - CVA
CIRCULAR VAV UNITS - CVA DESCRIPTION & FEATURES Circular VAV (Variable Air Volume) boxes are suitable for room temperature control in low, medium and high pressure installations. Units are suitable for
More informationToll-Free
Primary applications for Ross DS Series Security Doors and Frames include government, industrial, commercial and residential properties where protection of people and property is of utmost concern and
More informationPlease read these instructions thoroughly prior to beginning the Acrovyn Z-Clip Wall Panel installation!
Please read these instructions thoroughly prior to beginning the Acrovyn Z-Clip Wall Panel installation! This instruction sheet is intended to provide a specific guide to follow for the installation of
More informationCaptive Quarter-turn Fasteners Continuous Receptacle Strip MIL-F-25173A * APPROVED
Solutions Inc. PA-3500 Line Captive Quarter-turn Fasteners Continuous Receptacle Strip MIL-F-25173A * APPROVED The DFCI PA-3500 Line of fasteners combine the operating convenience, predictable clamping
More informationCBT 50LA-LS. Beamwidth Technology Line Array Column Loudspeaker with Eight 50 mm (2in) Drivers
CBT 5LA-LS Constant Beamwidth Technology Line Array Column Loudspeaker with Eight 5 mm (2in) Drivers Key Features: Patent-pending Constant Beamwidth Technology provides constant directivity up to the highest
More informationINTERIOR INSTALLATION
6" TWO (2) #6 FASTENERS BY OTHERS, NOT BY HUNTER DOUGLAS, TYP. MAIN TEE PER ASTM C635, BY OTHERS, TYP. 2" HANGER BRACKET ASSEMBLY PRIME BEAM* 2" MAX MAIN TEE T-GRID PER ASTM C635 BY OTHERS SEE DETAIL A.2
More informationPencil Hardness Tester BEVS 1301
Pencil Hardness Tester BEVS 1301 User Manual PAGE 1 1. Introduction BEVS pencil hardness tester offers an easy to use method for the determination of film hardness for a coating applied to a flat substrate,
More informationDETAIL SPECIFICATION SHEET
INCH-POUND MIL-DTL-83723/59D 26 August 2010 SUPERSEDING MIL-DTL-83723/59D 29 June 2009 DETAIL SPECIFICATION SHEET CONNECTORS, ELECTRICAL, (CIRCULAR, ENVIRONMENT RESISTING), PROTECTIVE COVERS, PLUGS, (FOR
More informationSafety cable 5.00 (127) Ø5.50 (140) N Narrow M Medium W Wide. N Narrow 14 M Medium 30 W Wide 40 V Very Wide 70
VF100C Bullseye Series - 8121C Trim ROUND ADJUSTABLE ACCENT DOWNLIGHT 1-LIGHT TRIMMED LED MEDIUM PROJECT 8121C Measurements in ( ) are metric equivalents. TYPE CATALOG NUMBER ROUND GIMBAL ADJUSTABLE TRIMMED
More informationElementary Dimensioning
Elementary Dimensioning Standards Institutions ANSI - American National Standards Institute - creates the engineering standards for North America. ISO - International Organization for Standardization -
More informationModel 30/L/0. Model 30/S/0. Shortl Blades, 0 Deflection 3/4" Spacing. Model 35/S/0 Short Blades, 0 Deflection 1/2" Spacing
model 30 / 35 - Steel Return Grilles & Registers 0 Deflection 0 fixed blade deflection maximizes free area for low pressure loss and sound levels Potential line of sight into duct thru grille is acceptable
More informationLEBANON BOARD OF EDUCATION, LEBANON, CONNECTICUT REQUEST FOR PROPOSALS FOR LYMAN MEMORIAL HIGH SCHOOL BOYS LOCKER ROOM 2/24/2017
LEBANON BOARD OF EDUCATION, LEBANON, CONNECTICUT REQUEST FOR PROPOSALS FOR LYMAN MEMORIAL HIGH SCHOOL BOYS LOCKER ROOM 2/24/2017 The Lebanon Board of Education invites sealed proposals for replacement
More information3M Power Clamp Wiremount Connectors
Instructions Scope: This document describes the termination instructions for 3M Power Clamp Wiremount Connectors Series 355 and 358. 3M Part Numbers 35505-6XX0-XXX XX 35805-6XX0-XXX XX Applicable Documents:
More informationDRAWING INSTRUMENTS AND THEIR USES
Chapter - 1A DRAWING INSTRUMENTS AND THEIR USES Drawing Instruments are used to prepare neat and accurate Drawings. To a greater extent, the accuracy of the Drawings depend on the quality of instruments
More informationINSTALLATION INSTRUCTIONS FRAMELESS CONTINUOUS HINGE SHOWER ENCLOSURE QCI5232
INSTALLATION INSTRUCTIONS FRAMELESS CONTINUOUS HINGE SHOWER ENCLOSURE QCI5232 QCI5232 Rev 0 Page 1 Certified 06/20/2016 INSTALLATION NOTES: Unpack your unit carefully and inspect for freight damage. Lay
More informationW-H 1000 SYSTEM Wall cladding. Metal product
W-H 1000 SYSTEM Wall cladding Metal product :::: 3 WALL CLADDING SYSTEM W-H 1000 APPLICATION AREA Acoustic and architectural design elements for market segments such as office, education, transportation
More informationIDENTIFICATION DEPOT, INC. 206 East Second Street Washington, NC PHONE FAX
Engraved Plastic Nameplates 1/16 rigid 2 ply blended acrylic extruded sheet with cap and core permanently fused together. Material is shatterproof and chip resistant. Matte finish meets ASTM D 709 Type
More informationHALL 1 & HALL 4 RESTROOM FINISH UPGRADE 100 SOUTH WEST TEMPLE, SLC, UT QUOTE # SLP42848 AUGUST 29, 2017 CONSTRUCTION DOCUMENTS ABBREVIATIONS
DRAWING INDEX HALL 1 & HALL 4 BID INFORMATION RESTROOM 100 SOUTH WEST TEMPLE, SLC, UT 84111 QUOTE # SLP42848 AUGUST 29, 2017 CONSTRUCTION DOCUMENTS ABBREVIATIONS CONSULTANTS OWNER SYMBOL LEGEND VICINITY
More informationDTFACT 16 C IN PAVEMENT LIGHT FIXTURE TESTING AND ANALYSIS FINAL SUMMARY PRESENTATION
DTFACT 16 C 00047 IN PAVEMENT LIGHT FIXTURE TESTING AND ANALYSIS FINAL SUMMARY PRESENTATION IESALC Fall Technology Meeting Government Contacts Subcommittee Dallas, TX October 23, 2017 Jeremy N. Downs,
More informationBCI General Specifications Design: BCI Gothia Shelving System
BCI General Specifications Design: BCI Gothia Shelving System SH7.0 General Product Design and Construction SH7.0.1 The shelving system is constructed with vertical frames connected by horizontal and diagonal
More informationdesign and trading company Manufacturer of metal forming machinery POLAND presses rolling mills punch presses
design and trading company Manufacturer of metal forming machinery POLAND presses rolling mills punch presses UPH 28 Horizontal hydraulic press - Built-in memory makes it possible to save up to 4 bending
More informationSECTION IDENTIFICATION FOR HVAC PIPING AND EQUIPMENT
SECTION 23 05 53 - IDENTIFICATION FOR HVAC PIPING AND EQUIPMENT PART 1 - GENERAL 1.1 SUMMARY A. Section Includes: 1. Nameplates. 2. Tags. 3. Stencils. 4. Pipe markers. 5. Ceiling tacks. 6. Labels. 7. Lockout
More informationStandard Specification for Fence Fittings 1
Designation: F 626 08 Standard Specification for Fence Fittings 1 This standard is issued under the fixed designation F 626; the number immediately following the designation indicates the year of original
More informationStripmaster Wire Strippers
D Stripmaster and Stripmaster Lite Wire Strippers One-step stripping enhances productivity Spring-action motion increases leverage and reduces operator fatigue Precision-ground, knife-type blades provide
More informationDENVER PUBLIC SCHOOLS DESIGN AND CONSTRUCTION STANDARDS This Standard is for guidance only. SECTION METAL LOCKERS
PART 0 A/E INSTRUCTIONS 0.01 GENERAL DESIGN REQUIREMENTS A. Architect shall coordinate with the DPS Project Manager the type, layout and size of lockers required on the project. B. Varsity athletic Lockers
More informationChapter 1 Introduction
Chapter 1 Introduction Contents Engineering drawing Drawing standards Drawing sheet Scale Lettering Line types Engineering Drawing Contents Engineering Drawing Effectiveness of Graphic Language 1. Try
More informationDimensioning. Dimensions: Are required on detail drawings. Provide the shape, size and location description: ASME Dimensioning Standards
Dimensioning Dimensions: Are required on detail drawings. Provide the shape, size and location description: - Size dimensions - Location dimensions - Notes Local notes (specific notes) General notes ASME
More informationStandard Test Method for Measuring Warpage of Ceramic Tile 1
Designation: C 485 09 Standard Test Method for Measuring Warpage of Ceramic Tile This standard is issued under the fixed designation C 485; the number immediately following the designation indicates the
More informationFAP63TC-W. Shallow Mount FAP Strategy III Series Ceiling Loudspeaker
1/7 FAP63TC-W Shallow Mount FAP Strategy III Series Ceiling Loudspeaker 218 Atlas Sound LP. The Atlas Circle A, Soundolier, and Atlas Sound are trademarks of Atlas Sound L.P. IED is a Registered Trademark
More informationIsometric Drawing (Architectural Board drafting)
Design and Drafting Description Isometric drawings use perspective to communicate a large amount of information in a single drawing. Isometric drawings show three sides of an object, making it easier to
More informationMR Modulo Adjustable Constant Airflow Regulator
& ZONE CONTROLS Adjustable Constant Airflow Regulator PRODUCT SPECIFICATIONS & TECHNICAL DATA Construction 5 4 1 GENERAL The model Adjustable Constant Airflow Regulator is a modulating orifice that automatically
More informationAwning and Casement Window
Awning and Casement Window Please also see: Options Full Lifetime Warranty Overview All Series Casement and Awning windows are available in both standard and custom sizes to match virtually any design,
More informationAMPCO PRODUCTS, INC. TECHNICAL SPECIFICATIONS SOLID PHENOLIC CORE TOILET COMPARTMENTS
PART 1 - GENERAL 1.1 RELATED DOCUMENTS TECHNICAL SPECIFICATIONS SOLID PHENOLIC CORE TOILET COMPARTMENTS A. Drawings and General Provisions of Contract, including General and Supplementary Conditions and
More informationSeries 525 LouvreMASTER Adjustable Louvre Window
Series 525 LouvreMASTER Adjustable Louvre Window DESIGNER SERIES Photo courtesy of Hanlon Windows Australia DATE: NOVEMBER 2009 REPLACES: AUGUST 2003 DESIGNER SERIES Series 525 KEY EATURES / PERORMANCE
More information1. Show the following information with additional information necessary to indicate shop compliance with the requirements of this section.
SECTION 12360 LIBRARY SHELVING PART 1 GENERAL 1.01 SUMMARY A. Related Sections: 1. 06100 - Carpentry. 2. 09200 - Metal Studs, Lath, Suspension Ceiling, Plaster and Stucco. 3. 09660 - Resilient Tile Flooring.
More informationSM82-EZ-II-WX 8 SURFACE MOUNT WEATHERPROOF SPEAKER. Nominal Impedance. Sensitivity 2.83V/1M Sensitivity 1W/1M (2)
Specifications: Nominal Impedance Impedance (min) Sensitivity db @ 2.83V/1M Sensitivity db @ 1W/1M (2) Frequency Response (± 3 db) Frequency Response (±10 db) Max. Program Power Max. Continuous Power RMS
More informationINSTALLATION INSTRUCTIONS FRAMELESS CONTINUOUS HINGE SHOWER ENCLOSURE QCI5233
INSTALLATION INSTRUCTIONS FRAMELESS CONTINUOUS HINGE SHOWER ENCLOSURE QCI5233 QCI5233 Rev 0 Page 1 Certified 06/20/2016 INSTALLATION NOTES: Unpack your unit carefully and inspect for freight damage. Lay
More informationOvertravel of 3.5 mm max. Power source DC D5C-1DS0 D5C-1DP0 D5C-1DA0 AC D5C-1AS0 D5C-1AP0 D5C-1AA0 Antenna only D5C-00S0 D5C-00P0 D5C-00A0
Touch Switch Unique 18 mm Capacitive Touch Switch with Choice of Three Actuators is Activated with Only a Very Slight Physical Contact Lightweight objects, such as thin wire or foil can be accurately detected.
More informationHandles Fixed and folding, with a large selection of profiles, positions, types, threads, materials and finishes.
Handles Fixed and folding, with a large selection of profiles, positions, types, threads, materials and finishes. Standoffs Round, hex, square, female, swage, male-female, hinged, anti-rotation and metric.
More informationFRAMED PANEL / DOOR / PANEL CONTINUOUS HINGE SHOWER ENCLOSURE INSTALLATION INSTRUCTIONS
FRAMED / DOOR / CONTINUOUS HINGE SHOWER ENCLOSURE INSTALLATION INSTRUCTIONS QCI5229 Rev 0 6 INSTALLATION NOTES: Unpack your unit carefully and inspect for freight damage. Lay out and identify all parts
More information8.50 (216) Ball Catch Retainers 3.00 (76) Aperture Lens Location .74 (19)
VF150 Series - 8704 Trim RECESSED RECTANGULAR BEVELED ACCENT 2-LIGHT TRIMMED LED PROJECT TYPE CATALOG NUMBER Measurements in ( ) are metric equivalents. RECTANGULAR BEVELED TRIMMED ACCENT - The VF150 Series
More informationStandard Specification for High-Strength Bolts for Structural Steel Joints [Metric] 1
Designation: A 325M 00 METRIC An American National Standard Standard Specification for High-Strength Bolts for Structural Steel Joints [Metric] 1 This standard is issued under the fixed designation A 325M;
More informationCall Today for a Free Quote! Immediate Availability. Inexpensive Delivery.
Call Today for a Free Quote! Immediate Availability. Inexpensive Delivery. ASTM A606-4 / A588 / A847 (AKA CORTEN ) STRUCTURAL COMPONENTS FLAT SHEETS, FLAT BAR, PLATE, COIL, RECTANGULAR TUBE, SQUARE TUBE,
More informationDETAIL SPECIFICATION SHEET CONNECTORS, ELECTRICAL, MODULAR, TYPE IV, CONNECTOR, 200 CONTACT, CENTER
INCH-POUND MIL-DTL-28754/100A 29 December 2015 SUPERSEDING MIL-C-28754/100(SH) 31 October 1989 DETAIL SPECIFICATION SHEET CONNECTORS, ELECTRICAL, MODULAR, TYPE IV, CONNECTOR, 200 CONTACT, CENTER This specification
More information