IDENTIFICATION DEPOT, INC. 206 East Second Street Washington, NC PHONE FAX
|
|
- Dominic Brooks
- 6 years ago
- Views:
Transcription
1 Engraved Plastic Nameplates 1/16 rigid 2 ply blended acrylic extruded sheet with cap and core permanently fused together. Material is shatterproof and chip resistant. Matte finish meets ASTM D 709 Type I spec. White letters/black background Black letters/white background Various plate size, letter size, letter color, and background color to meet specific job requirements. All sides are beveled and available with adhesive backing AND or holes. Durability is indefinite for indoor applications. All Plastic can be used outside, and is UV stable. 2-sided engraved also available. 1/8 also available Laser engraving also available. Available in sizes to 18 x 24
2 Precoiled Plastic Markers Meets ANSI 3.1 standard for diameter and letter size Arrows included on all markers 360 visibility (Sizes WA-WE) Semi rigid colored vinyl Sizes WA through WE: 15 gauge Sizes WC through WH: 30 gauge Ink: UV Resistant Pipe OD(include insulation) Letter Size Or Style 3/4 to 1-1/4 1/2 WA 1-1/8 to 2-3/8 3/4 WB 2-1/2 to 3-1/4 1-1/4 WC 3-3/8 to 4-1/2 1-1/4 WD 4-5/8 to 6 1-1/4 WE 6-1/8 to 8 2-1/2 WR 8-1/8 to /2 WG greater than /2 WH Nylon straps provided with styles WF WH 5-7 year outdoor life Samples available upon request
3 Self Adhesive Pipe Markers Material: 4 mil Flexcon Vinyl Film Adhesive: Permanent Temperature servuce range: -40ºF to 180ºF Application temperature: 50ºF or above Expected life: 5-7 years with arrow banding tape Compliance: Meets Ansi A 13.1 Standard (below) For Letter size: Pipe OD (include insulation) Letter Size Or Style 3/4 to 1-1/4 1/2 A 1-3/8 to 2-1/4 3/4 B 2-1/2 to 6 1-1/4 C 8 to /4 D over /4 E For Color designation: Sample available on request No extra charge for custom legends
4 Arrow Banding Tape Material: 4 mil Flexcon Vinyl Film Adhesive: Permanent Range: Service temperature: -40 F to 180 F Application temperature: 50 F or above Expected life: 5-7 years ANSI colors to match pipe markers Comes in 30 yard rolls Letter Size Style Tape Width Arrow Size Approximate number of markers per roll of arrow tape 3/4 B 1 3/ /4 C 2 1-1/ /2 D 3 2-1/ /2 E 4 3-1/
5 Brass Valve Tags Material: 18 gauge brass ( 70% copper, 30% zinc ) Method: Engraved and black filled (other fill colors: red, white, and yellow) Dimension: 1-1/2 round Other sizes available: 2 round 2 square 2 octagon 1-1/2 & 2 triangle Laser engraving available Other materials available: Engraved plastic, one and two sided engraveable stainless steel, and anodized aluminum Samples available upon request
6 Accessory Items Beaded Brass Chain Type # 6 in 4-1/2 lengths with connector. Sold in packages of 100. S Hooks Standard size 1-1/4. Solid brass. Sold in packages of 100. Solid Brass Jack Chain Material: Trade size # diameter Load limit: 8 lbs. Lengths available: 50 feet (to hang approximately 55 tags) Ceiling Valve Tacks 7/8 diameter head with ½ steel point. Various colors available.
7 Stencils 10 mil flexible polyester film 7 x 24 standard oilboard Laser cut Standard letter sizes (including arrows): ½, ¾, 1, 1-1/4, 2, 2-1/2, and 3-1/2 Custom and larger sizes available
8 Safety Tags Material: Fasson V-MAX 10 mil (HDPE) Service Temperature Range: -70º to 200ºF Brass grommet included 8 nylon tie included Standard size: 3 x 5-3/4 2 sided printing available Custom tags available
9 Adhesive Duct Marker Standard marker is 4 by 10 with 1-1/4 lettering and arrows Order Marker Style DM Marker is 2 by 14 with 1-14 lettering Order Marker Style CP Marker is 2 by 14 with 1-1/4 letttering and solid arrow Order Marker Style CP Marker is 2 by 14 with 1-1/4 letttering and perforated arrow Order Marker Style CP Material: Vinyl film with permanent pressure sensitive adhesive Range: Service range temperature: -40 to 180 F Application: Clean surface, 50 F or above Expected life: 4-6 years under normal conditions Standard Colors (letters/background): black/white, black/yellow, black/orange, white/green, white/red, white/blue, white/black, white/brown
10 DETECTABLE UNDERGROUND UTILITY MARKING TAPE I. SPECIFICATIONS Tape consists of a minimum 5 Mil overall thickness, with a 0.35 Mil ( ) solid aluminum foil core. Construction is 0.8 Mil clear film, reverse print laminated to aluminum foil to 3.75 Mil clear film, making the film permanently printed. All tape meets or exceeds the industry standards including the American Public Works Association (APWA) color code. II. TEST DATA Thickness Tensile Strength Elongation Colors Bond Strength Adhesives Bottom Layer Top Layer Foil Message Repeat Inks Flexibility Printability METHOD ASTMD2103 ASTMD882 ASTMD882-75B APWA Coded Boiling Water ASTM ASTMD 2578 VALUE 5.0 Mil 35 lbs./inch (15,000 PSI) 80% See Below 5 Hours w/o Peel Morton 548 or Equivalent Virgin PE Virgin PET Industry Standard Varies per Legend AXL II Pliable Hand 45 Dynes III. COLOR CODE Blue Green Orange Purple Red Yellow Water & Associated Lines Sanitary & Associated Lines Telecommunications Lines Reclaimed Water Lines Electric & Associated Lines Gas & Associated Lines STANDARD LEGENDS AVAILABLE: CAUTION WATER LINE BURIED BELOW CAUTION SEWER LINE BURIED BELOW CAUTION SANITARY SEWER BURIED BELOW CAUTION GAS LINE BURIED BELOW NOTE: CUSTOM LEGENDS AVAILABLE
11 Valve Chart Frames Use Valve Chart Frames to display your valve tag charts (included) Use valve tag chart to list up to 50 locations Rugged extruded, clear anodized aluminum frame comes with clear plastic window Frame holds 8 X 11 valve tag charts
Piping & Equipment Identification
Piping & Equipment Identification Part 1 General 1.01 Description of Work A. Work in this section includes: Identification materials, including necessary accessories indicated on Contract Documents and
More informationCSP PSYCHIATRIC SERVICES UNIT SECTION IDENTIFICATION FOR HVAC PIPING AND EQUIPMENT
SECTION 23 05 53 IDENTIFICATION FOR HVAC PIPING AND EQUIPMENT PART 1 GENERAL 1.1 SUMMARY A. Section Includes: 1. Pipe Markers. 2. Valve Tags. 3. Equipment Nameplates. 4. Underground Marking Tape. 5. Duct
More informationSECTION IDENTIFICATION OF PLUMBING, PIPING AND EQUIPMENT. A. Section includes nameplates, tags, stencils and pipe markers.
SECTION 22 05 53 IDENTIFICATION OF PLUMBING, PIPING AND EQUIPMENT PART 1 - GENERAL 1.1 SUMMARY A. Section includes nameplates, tags, stencils and pipe markers. B. Related Sections: 1. Section 09 05 00
More informationSECTION IDENTIFICATION OF HVAC PIPING AND EQUIPMENT. A. Section includes nameplates, tags, stencils and pipe markers.
SECTION 23 05 53 IDENTIFICATION OF HVAC PIPING AND EQUIPMENT PART 1 - GENERAL 1.1 SUMMARY A. Section includes nameplates, tags, stencils and pipe markers. B. Related Sections: 1. Section 09 05 00 Common
More informationSECTION IDENTIFICATION FOR HVAC PIPING, DUCTWORK AND EQUIPMENT
SECTION 23 05 53 PART 1 - GENERAL 1.1 SUMMARY A. Work Included: 1. Plastic Nameplates 2. Tags 3. Plastic Pipe Markers 4. Ceiling Tags 5. Detectable Underground Tape 6. Stencils PART 2 - PRODUCTS 2.1 MANUFACTURERS
More informationSECTION IDENTIFICATION FOR PLUMBING PIPING AND EQUIPMENT
SECTION 220553 - IDENTIFICATION FOR PLUMBING PIPING AND EQUIPMENT Henderson Engineers, Inc. PART 1 - GENERAL REQUIREMENTS 1.1 SUMMARY A. Extent of Plumbing work to be identified as required by this Section
More informationExcavating, Backfilling, and Compaction for Utilities Piping (Plumbing).
SECTION 15047 - IDENTIFICATION PART 1 GENERAL 1.01 SUMMARY A. Section Includes: Identification including necessary accessories indicated on Construction Documents and specified in this section or as required
More informationSECTION IDENTIFICATION FOR HVAC PIPING AND EQUIPMENT
SECTION 23 05 53 - IDENTIFICATION FOR HVAC PIPING AND EQUIPMENT PART 1 - GENERAL 1.1 SUMMARY A. Section Includes: 1. Nameplates. 2. Tags. 3. Stencils. 4. Pipe markers. 5. Ceiling tacks. 6. Labels. 7. Lockout
More informationSECTION IDENTIFICATION FOR HVAC PIPING AND EQUIPMENT
SECTION 230553 - IDENTIFICATION FOR HVAC PIPING AND EQUIPMENT PART 1 GENERAL 1.1 SECTION INCLUDES A. Nameplates. B. Tags. C. Stencils. D. Pipe Markers. 1.2 RELATED REQUIREMENTS A. Section 099123 - Interior
More information1. ASME A Scheme for the Identification of Piping Systems.
SECTION 40 05 53 - IDENTIFICATION FOR PROCESS PIPING PART 1 - GENERAL 1.1 SUMMARY A. Section Includes: 1. Nameplates. 2. Tags. 3. Stencils. 4. Pipe markers. 5. Labels. 6. Lockout devices. B. Related Requirements:
More informationSECTION IDENTIFICATION FOR FIRE SUPPRESSION PIPING AND EQUIPMENT
SECTION 21 05 53 IDENTIFICATION FOR FIRE SUPPRESSION PIPING AND EQUIPMENT Display hidden notes to specifier. (Don't know how? Click Here) Copyright 2015-2015 ARCAT, Inc. - All rights reserved PART 1 GENERAL
More informationIndustrial Pipe Marking
Industrial Pipe Marking Pipe and Valve Identification Specialists SPECIFICATIONS ASME (ANSI) Standard A13.1-2007 The ASME (ANSI) Standard for pipe identification is a widely used guideline in determining
More informationElectrical Identification
Electrical Identification i n n o v a t i o n y o u c a n i d e n t i f y w i t h. MARKING SERVICES INCORPORATED 8 0 0. 2 3 4. 0 1 3 5 8 0 0. 6 2 7. 6 4 3 2 F A X m a r k s e r v. c o m s a l e s @ m a
More informationUNIVERSITY SERVICES ANNEX James Madison University Harrisonburg, Virginia State Project Code: Architect s Project Number:
SECTION 230553 - IDENTIFICATION FOR HVAC PIPING AND EQUIPMENT PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Provisions of the Contract and of the Contract Documents apply to this Section. 1.2 SUBMITTALS A.
More informationSECTION MECHANICAL IDENTIFICATION
SECTION 15190 MECHANICAL IDENTIFICATION PART 1 GENERAL 1.01 SECTION INCLUDES A. Section Includes: 1. Nameplates. 2. Tags. 3. Stencils. 4. Pipe Markers. 1.02 SUBMITTALS A. Submit valve chart and schedule,
More informationSECTION IDENTIFICATION FOR HVAC PIPING AND EQUIPMENT
SECTION 23 05 53 IDENTIFICATION FOR HVAC PIPING AND EQUIPMENT PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and
More informationSECTION MECHANICAL IDENTIFICATION
Buebtel/Perlcins Community Learning Center GPD - 2001271.15 SECTION 15075 MECHANICAL IDENTIFICATION PART 1- GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General
More informationA. Product Data: For each electrical identification product indicated.
SECTION 16075 - ELECTRICAL IDENTIFICATION PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 1 Specification
More informationSECTION MECHANICAL IDENTIFICATION
PART 1 GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions Specification Sections, apply to this Section. B. Related Sections:
More informationSECTION IDENTIFICATION DEVICES
SECTION 10 14 00 - IDENTIFICATION DEVICES PART 1-GENERAL 1.1 SUMMARY A. Section Includes: 1. Tag, tape and stenciling systems for equipment, piping, valves, pumps, ductwork and similar items, and hazard
More informationPROJECT TITLE PROJECT NO: CONTRACT TITLE GRANT NO: UNIVERSITY OF CALIFORNIA, DAVIS CITY, CALIFORNIA
The following standard specification is intended to be edited according to the specifics of the project. Brackets [ ] and areas shaded in gray [e.g. format] indicate requirements that are optional depending
More informationSECTION ELECTRICAL IDENTIFICATION
SECTION 16075 ELECTRICAL IDENTIFICATION PART 1 - GENERAL 1.01 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification
More informationB. Samples: For color, letter style, and graphic representation required for each identification material and device.
PART 1 - GENERAL 1.01 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification Sections, apply to this Section.
More informationSECTION COMMON WORK RESULTS FOR HVAC
SECTION 23 05 00 COMMON WORK RESULTS FOR HVAC PART 1 - GENERAL 1.1 SUMMARY A. Section Includes: 1. Ball Valve. 2. Hangers and Supports. 3. Identification Tags and Sleeves. 1.2 INCLUDED SECTIONS A. Section
More informationPART 0 DESIGN STANDARDS 0.01 GENERAL DESIGN GUIDELINES
PART 0 DESIGN STANDARDS 0.01 GENERAL DESIGN GUIDELINES A. Assign unit identification numbers to operating units of equipment within a class or subclass during the design phase of new buildings, additions,
More informationSECTION MECHANICAL IDENTIFICATION. 1. Identification of mechanical products installed under Division 15.
SECTION 15190 MECHANICAL IDENTIFICATION PART 1 - GENERAL 1.01 SUMMARY A. Section Includes: 1. Identification of mechanical products installed under Division 15. B. Related Sections: 1. Section 09900 -
More informationSECTION MECHANICAL IDENTIFICATION
SECTION 15190 MECHANICAL IDENTIFICATION PART 1 - GENERAL 1.01 SUMMARY A. Section Includes: 1. Identification of mechanical products installed under Division 15. B. Related Sections: 1.02 REFERENCES 1.
More informationPage PRODUCT DESCRIPTION
Page 1 2004-02-29 PRODUCT FEATURES BASIC USES / RELATED USES Identification bands or markings for facility piping. BradySnap-On / Strap-On Vinyl: For normal duty, mechanically fastened. Custom or Blank
More informationNORTH HARRIS COUNTY REGIONAL WATER AUTHORITY. Section ELECTRICAL IDENTIFICATION
PART 1 GENERAL 1.01 SUMMARY Section 16195 A. This Section includes electrical identification for the following: 1. Nameplates and labels 2. Wire and cable markers 3. Conduit markers 4. Cable tray markers
More informationPage PRODUCT DESCRIPTION
Page 1 2003-02-26 PRODUCT FEATURES! BASIC USES / RELATED USES " Identification bands or markings for facility piping. # (Ultra-mark) Wrap-Around Polyester: For harsh environments, outdoor piping systems,
More informationPage PRODUCT DESCRIPTION
Page 1 2004-02-29 PRODUCT FEATURES BASIC USES / RELATED USES Self-adhesive identification bands or markings for facility piping, Self-StickingVinyl Weather-Code Outdoor Pipe Markers Medical Gas Pipe Markers
More informationMASTER DISTRIBUTORS, INC MAXI TAPE SIGN & AWARDS AUTHORIZED DISTRIBUTOR
MASTER DISTRIBUTORS, INC MAXI TAPE 2008 SIGN & AWARDS AUTHORIZED DISTRIBUTOR Master Distributors, Inc. / Maxi Tape has been supplying industries with their pressure sensitive tapes for over 30 years. Master
More informationNORTHWESTERN UNIVERSITY PROJECT NAME JOB # ISSUED: 11/06/2017
SECTION 23 0553 - MECHANICAL SYSTEMS IDENTIFICATION GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification
More informationMechanical Vice Grips. Mechanical Wedge Action Grips
Mechanical Vice Grips 734B 750 N (150 lbf) 768C 10 kn (2000lbf) Thwing-Albert s Mechanical Vice Grips are designed for measuring materials up to 10 kn. They are ideal for general tensile strength testing
More informationGO... with the Leader! Advanced Digital Cable is the manufacturing leader of cable for the traffic industry
GO... with the Leader! Advanced Digital Cable is the manufacturing leader of cable for the traffic industry ADC is a proud Sustaining Member of the IMSA organization and is the largest manufacturer in
More informationMulti-Tac Inc. Self Adhesive Solutions from the Source. pressure sensitive vinyl films. wall graphics vinyl. window graphic films.
Self Adhesive Solutions from the Source pressure sensitive vinyl films wall graphics vinyl window graphic films laminating films screen printable films Multi-Tac Inc. Multi-Tac Graphics - We Coat, You
More informationCable Ties and Accessories
3M Cable Ties are designed to secure wire bundles and harness components quickly, without slipping. Featuring a self-locking head and a locking mechanism, they are designed to handle temperatures up to
More informationSECTION ELECTRICAL IDENTIFICATION
SECTION-16075 ELECTRICAL IDENTIFICATION PART 1 GENERAL 1.01 SECTION INCLUDES A. Electrical identification to identify all electrical items for easy operation and maintenance including, but not limited
More informationThe intensive illuminating power. Printable Substrates Photoluminescent Products
The intensive illuminating power Printable Substrates Photoluminescent Products Published January 2011 A few examples of material applications Photoluminescent safety signs and low location lighting The
More informationMRI Safety. Stickers. MRI Safe - Do Not Remove From MRI Area - Warning Stickers. Available in Red or Green
Stickers MRI Safe - Do Not Remove From MRI Area - Warning Stickers Die Cut Permanent Adhesive Laminated 6 3 4 1 1/2 1 Available in Red or Green MT-1065 Red - 5 Large, 5 Medium, 5 Small $19.95 pk. MT-1092
More informationSECTION MECHANICAL IDENTIFICATION. 1. Identification of mechanical products installed under Division 15.
SECTION 15190 MECHANICAL IDENTIFICATION PART 1 - GENERAL 1.01 SUMMARY A. Section Includes: 1. Identification of mechanical products installed under Division 15. B. Related Sections: 1. Section 09900 -
More informationdesignmasterfence.com
designmasterfence.com > INDEX > WHAT IS DESIGNMASTER? > PRODUCTS APPLICATIONS 2 3 > CLASSIC FENCE PANEL Specs & Advantages > CLASSIC FENCE POST Specs, Advantages & Installation > BRACKETS & ACCESSORIES
More informationTilt Specify Tube Length & Bearing Color When Ordering Actual Diameter 9/16". Referred to as 5/8" in Trade. Tube. Bearing Rod.
WB7900 Series Balance Non Tilt & Color When Ordering Actual Diameter 9/16". Referred to as in Trade. WB79-AT Series Balance Tilt & Color When Ordering Actual Diameter 9/16". Referred to as in Trade. TUBE
More informationDigital Magnetics Catalogue
Digital Magnetics Catalogue Digital Magnetics Change your graphics quickly. 01 / 02 Introduction DM 03 / 04 DM Ferro & Magnetic Base About DM 05/ 06 DM Flexible Ferrous films Digital Magnetics is a brand
More informationSelf Laminating Wire and Cable Markers
SBP Self Laminating Wire and Cable Markers Technical Datasheet TTDS-211 Revision 12 - December 2018 SBP is a clear vinyl film with a white thermal transfer printable area. On application, the clear film
More informationSECURITY. Sign & Products Catalog. Your Security Sign Provider Since 1946
SECURITY Sign & Products Catalog Your Security Sign Provider Since 1946 Your customers trust you with the security of their home, warehouse, or company headquarters. A well-made sign lets your customer
More informationBrady B-595 Indoor/Outdoor Vinyl Tape for the GlobalMark Printer
Brady B-595 Indoor/Outdoor Vinyl Tape for the GlobalMark Printer Beginning March 1, 2010, Brady s leading outdoor grade vinyl for the GlobalMark Printer is being replaced by a new B-595 vinyl. This new
More informationSBP Self Laminating Wire and Cable Markers
SBP Self Laminating Wire and Cable Markers Technical Datasheet TTDS-211 Revision 10 - April 2018 SBP is a clear vinyl film with a white thermal transfer printable area. On application, the clear film over-laminates
More informationIndustrial and Transportation Business DISTRIBUTOR PRODUCT LINE
Industrial and Transportation Business DISTRIBUTOR PRODUCT LINE 3900 DUCT TAPE 3900 DUCT TAPE MRO (Maintenance and Repair) Construction Trade Shows and Conventions General Industrial Electrical Aerospace
More informationSECTION SITE FURNISHINGS FOR CFCRT. 1. American Society for Testing and Materials (ASTM).
PART 1 - GENERAL 1.1 SECTION INCLUDES A. Benches. B. Trash receptacles. C. Bike storage. 1.2 REFERENCE STANDARDS A. Including but not limited to: 1. American Society for Testing and Materials (ASTM). 1.3
More informationMEASURING TOOLS MEASURING TOOLS
CALIPERS Steel Caliper carbon steel construction measures in millimeters & inches for depth, internal, external & step measurements measuring range: 0" to 6" or 0 to 150 mm 9" Magnetic V-Groove Torpedo
More informationTABLE OF CONTENTS. Product Listing Index. Look for this symbol. It let s you know which products are available in 4-Color Process. BLUE FROG PRINTING
www.bluefrogprinting.net BFP16C The Roll Labels, Decals, Banners & Static Clings you ve come to expect and so much more! Product Listing Index Blue Frog Printing is proud to offer a large selection of
More information3M Flexographic Plate Mounting Systems. Selection Guide. Balancing solids and dots for customer satisfaction
M Flexographic Plate Mounting Systems Selection Guide 4 Balancing solids and dots for customer satisfaction Wide choice of adhesives, foams, and thickness for Forhalftoneworkwheredotgainisaconcern, a softer
More informationSECTION TRACER WIRE FOR NONMETALLIC PIPE
PART 1 GENERAL 1.1 DESCRIPTION A. The CONTRACTOR shall furnish and install a conductive tracer wire with all buried plastic water mains, services and appurtenances in accordance with the Water Utilities
More informationNew Product Release: October 2014 Boone Racks
New Product Release: October 2014 Boone Racks Double Fido Fountain Mounting: Surface NOTE: THESE ROUGH-IN DIMENSIONS MAY VARY ½: (13 mm) PLUS OR MINUS NOTE: All dimensions subject to manufacturing variance
More informationCARTON SEALING TAPES PRODUCT INFORMATION SALES GUIDE Marquardt Avenue Santa Fe Springs CA Phone Fax
CARTON SEALING TAPES PRODUCT INFORMATION SALES GUIDE PRESSURE SENSITIVE TAPE Adhesive Film Four Types of Adhesive Water-Based Acrylic Solvent-Based Acrylic Hot Melt (Synthetic Rubber) Natural Rubber Three
More informationis ~10 mil and we offer both gloss and matte.
Vol. 16, No. 8 Color Posters and Finishing January 2011 Throughout this document, you will find many options for banner stands that Printing & Copy Services now offer. A spreadsheet with all stand options
More informationWindow Graphics. Matched Overlaminate - MetaGuard 670* 1.6mm Peforations, 40% Open Area
5 Metamark MD-CV1 Clear Vision (Perforated One-Way Film) 5.1 Metamark MD-CV2 Premium Grade Clear Vision (Perforated One-Way Film) 5.2 Metamark MD-CR Optically Clear Window Film 5.3 Metamark MD-CRR Optically
More informationCall Today Ship Today!
JUST LIKE HAVING IT ON THE SHELF MOLDS WELD METAL ACCESSORIES M-100 M-101 M-102 M-10 M-106 M-112 M-12 M-151 M-15 M-156 M-159 M-161 SAME DAY SERVICE ( Market) 15CP 25CP 25CI 32CI 5CI Mini- Clamp Flint Ignitors
More informationPRODUCT CATALOG Meadowview Rd Junction City, OR fax
Made in the USA, since 1972 PRODUCT CATALOG Nichols Manufacturing 292 Meadowview Rd Junction City, OR 97448 541-485-60 sales@nicholsmanufacturing.com www.nicholsmanufacturing.com 122616 Nichols Manufacturing
More informationTape No. Description Principal Uses
POLYMASK CORPORATION, A 3M COMPANY 500 Thornburg Drive Conover, NC 28613 Tel: 828.465.3053 Fax: 828.465.2404 www.3m.com/protectivetapes 1614 Clear polyester film with waterbased acrylic pressure sensitive
More informationProduct Catalogue. Casements / Holders Plaques Photoluminescent Mounting Materials Custom Graphics Printing. EvacGlow.com
Product Catalogue Casements / Holders Plaques Photoluminescent Mounting Materials Custom Graphics Printing EvacGlow.com Introduction Building evacuation plans, fire evacuation maps and emergency exit signs
More informationMisc Accessories. Fiber-Tip Markers DURA-INK #15 MARKER
Fiber-Tip Markers FINE TIP DURA-INK #15 MARKER 96022... Red 1... 72 96023... Black 1... 72 96025... Blue 1... 72 96026... Green 1... 72 96030... Black 2... 72 96033... Black 3... 72 Ideal for fine line
More informationSBCA Industry Standards Subcommittee. Specification for 75 Ω Flexible RF Coaxial Drop Cable for Direct Broadcast Satellite (DBS) Installations
SBCA Industry Standards Subcommittee Document: SBCA Series 6 Recommended Practices Date of Issue: Specification for 75 Ω Flexible RF Coaxial Drop Cable for Direct Broadcast Satellite (DBS) Installations
More informationCelebrating. 65 Years
Celebrating 65 Years Contents Beveling Equipment Clamps - Internal Clamps - External Auxiliary Equipment Pipe Lifting Welding Qualification Pipe Bending Beveling Equipment On Band Type Beveling Machine:
More informationPolitical Product Guide. 2' x 3' #3309P - 2 ³ ₄" Dia. CAMPAIGN ESSENTIALS
Political Product Guide # # 3¹ 2' x 3' #1060 - mets Grom 4 #3309P - 2 ³ ₄" Dia. CAMPAIGN ESSENTIALS 2016 CONTENTS Signs Posters & Banners Double-Sided Yard Signs...1-3 Poly Bag Yard Signs...4 Economy Corrugated
More informationSigns, Posters & Banners
CONTENTS Signs, Posters & Banners Poly Bag Yard Signs...1 Double-Sided Yard S igns...2-3 Corrugated Plastic Yard Signs...4-7 Economy Corrugated Yard Signs...8 Custom Design Posters... 10-11 Banners...12-13
More informationlb. Coated Inkjet Bond
746 36 lb. Coated Inkjet Bond 746 is a high-quality base paper with a waterresistant inkjet coating to produce a strong, smooth printing surface ideally suited for many types of high-volume CAD and graphic
More informationSLEEVING (CONVOLUTED) SLEEVING (SPLIT CONVOLUTED) SLEEVING (PVC) 56 AUTO MARINE PRODUCT CATALOGUE 2018/19 VISIT:
SLEEVING (CONVOLUTED) Halogen-free nylon convoluted sleeving suitable for bundling of wires and protection against abrasion. Continuous operating temperature -40ºC to 5ºC with short excursions up to 150ºC.
More informationCARTON SEALING TAPES PRODUCT INFORMATION SALES GUIDE Marquardt Avenue Santa Fe Springs CA Phone Fax
CARTON SEALING TAPES PRODUCT INFORMATION SALES GUIDE PRESSURE SENSITIVE TAPE Adhesive Film Four Types of Adhesive Water-Based Acrylic Solvent-Based Acrylic Hot Melt (Synthetic Rubber) Natural Rubber Three
More informationPSP Digital Print Range
PSP Digital Print Range from PSP Limited Viscom Acrylic General Purpose Cast Acrylic - For Signage, Display and Construction. Used extensively in signage and display, Acrylic is lightweight (half that
More informationTesting. Material testing will be according to applicable AASHTO, ASTM or Department methods as specified.
907.01 Section 907. FENCING MATERIALS 907.01 General Requirements. Materials for use in fencing property, right-of-way and other installations must comply with this section. 907.02 Testing. Material testing
More informationHOOK-UP WIRE A STYLE TO SUIT ANY NEED
A STYLE TO SUIT ANY NEED Alpha s commitment to quality and service starts at the beginning... with the manufacturing of single conductor hook-up wire, the most basic wiring component. Used extensively
More informationSewer/Water Utility - Trace Wire Specification
Sewer/Water Utility - Trace Wire Specification Materials General All trace wire and trace wire products shall be domestically manufactured in the U.S.A. All trace wire shall have HDPE insulation intended
More informationFULLER CHISELS CUTTING TOOLS
CUTTING TOOLS Back FULLER CHISELS From the standard Wood Chisel to our top-of-the-line Woodworker s Chisel, FULLER offers the perfect combination of variety and quality in its chisel line-up. Finely honed
More information3M Masking Tapes PRODUCT INFORMATION
3M Masking Tapes Key Customer Markets: Auto Assembly Aerospace Truck and Bus Recreational Vehicles Marine Parts Manufacturers Printing Manufacturers Paper Manufacturers Electronics 3M offers a complete
More informationPermaStripe. 1,00 kr. Product Images. Short Description. Beskrivning
PermaStripe 1,00 kr Product Images Short Description PermaStripe Solid color enhances visibility Self-adhesive marking tape for floors Made of industrial PVC Beveled edges allow extra smooth transit Durable
More informationDisassembly Instructions for Recycling June 10, 2010
Disassembly Instructions for Recycling June 10, 2010 These instructions apply to all workstation and wall products. Disassembly Once workstations or walls are dismantled as described under Disassembly
More informationNORMATIVE REFERENCES
American National Standards Institute NORMATIVE REFERENCES ANSI C135.30 1988 (expired 1993) Zinc-Coated Ferrous Ground Rod Electrodes for Overhead or Underground Lines American Society for Testing and
More informationINTERMEDIATE METAL CONDUIT
PRODUCT GUIDE 08 CONDUIT PIPES CONDUIT FITTINGS FITTINGS FOR FLEXIBLE CONDUITS METALLIC ELECTRICAL BOXES AND COVERS CONDUIT BODIES WEATHERPROOF BOXES AND COVERS CHANNELS & SUPPORTS METAL ENCLOSURES CHANNELS
More informationPiece Of Mind The last time you will see your product is when it leaves the factory floor
Piece Of Mind The last time you will see your product is when it leaves the factory floor Teal Tape & Plastics We are located half-way between Nashville and Chattanooga, Tennessee in the Coffee County
More informationAdvanced Graphic Engraving, LLC 3105 Melancon Road, Broussard, LA P: F:
Advanced Graphic Engraving, LLC 3105 Melancon Road, Broussard, LA 70518 P: 337.364.1991 F: 337.364.1951 sales@tagsfast.com www.tagsfast.com MANUFACTURING OFFSHORE PETRO-CHEMICAL MARINE S E R V I N G I
More informationUP4 LEARN-A-LOT (PLAYFUL) Parts List DESCRIPTION 90 ANGLE BRACKET DOOR WINDOW MUSIC CATERPILLAR CIRCLE FRAME CIRCLE MIRROR YELLOW STAINED GLASS RED STAINED GLASS SQUARE TRIANGLE SPIRAL WHEEL SQUARE MIRROR
More informationKNOW THE CODE. Ask your local plumbing inspector if it is OK to bury Yellow Polyethylene Pipe WAL-RICH CORPORATION UNDERGROUND GAS PRODUCTS
! KNOW THE CODE Ask your local plumbing inspector if it is OK to bury Yellow Polyethylene Pipe Q: WHO IS CONTINENTAL? A: CONTINENTAL has been manufacturing for the Utility & Gas Distribution industries
More informationReflective Solutions Engineered to Save Lives
Traffic Signs and Construction Zones Reflective Solutions Engineered to Save Lives ORAFOL Europe GmbH ORAFOL s Worldwide Locations Headquarters Oranienburg, Germany 2 Engineered to Save Lives - www.orafol.com
More informationDUPONT KAPTON POLYIMIDE FILM
GENERAL SPECIFICATIONS DUPONT KAPTON POLYIMIDE FILM INTRODUCTION DuPont manufactures and sells a variety of high-quality polyimide film products in conformance with ISO 9002 certification. These specifications
More informationWatermark Labelstm. a division of lustre-cal corporation
Watermark Labelstm a division of lustre-cal corporation tm Watermark Labels a division of lustre-cal corporation IN NOVEMBER 1964, Lustre-Cal Corporation began producing high quality labels for worldwide
More informationB34 Series Regulator Commercial and Industrial Regulator
B34 Series Regulator Commercial and Industrial Regulator Appropriate for many commercial and industrial uses such as gas engines, burners, furnaces and boilers. The rapid response of the B34 is particularly
More informationDigital Magnetics Support document
Digital Magnetics Support document Digital Magnetics Change your graphics quickly. 01 / 02 Introduction DM 03 / 04 Support Ferro & Magnetic Base About DM 05 / 06 Support Flexible Ferrous films Digital
More informationUP43 LEARN-A-L0T (NATURAL) Parts List DESCRIPTION 90 ANGLE BRACKET DOOR WINDOW MUSIC CATERPILLAR CIRCLE FRAME CIRCLE MIRROR YELLOW STAINED GLASS RED STAINED GLASS SQUARE TRIANGLE SPIRAL WHEEL SQUARE MIRROR
More informationWALL SHELVING SYSTEM 250/750
468 2/7 Installation Example Ceiling Height (CH) : 2800 mm Ceiling Height (CH) : 28 mm Corner Installation 2 design panels are used to cover mm space in case of ceiling height 28 mm. Corner Example 469
More informationRound Indicator Lights Mounting Hole Page
PRODUCT SERIES Round Indicator Lights Page 8, &. 9. &..7 - NEMA -R.7 8 & 9. 7. 8. 9 7. 8. - NEMA -R.9.9 Indicator Lights.7,.. 7. Rectangular Indicator Lights Panel Cutout. x.. x. 7 & 7. x.8 8. x. 9 & 7.
More informationMANUFACTURERS OF PRESSURE SENSITIVE FILMS SCREEN & OFFSET PRICE GUIDE
MANUFACTURERS OF PRESSURE SENSITIVE FILMS SCREEN & OFFSET GUIDE 2018 Materials for Screen & Offset Print Applications Contents VINYLS TRANSIT STATIC CLING VINYL LORS WALL VINYLS & FABRICS INDIGO PRINT
More informationTranstick for the Production of Integral Labels. THIS PRODUCT MAY BE USED WHEN MAKING INTEGRAl LABELS UNDER US PROCESS PATENT # 6,068,037
Transtick for the Production of Integral Labels THIS PRODUCT MAY BE USED WHEN MAKING INTEGRAl LABELS UNDER US PROCESS PATENT # 6,068,037 TS048 Transtick Lite two liner transfer tape. Ideal for label/form
More informationUL Construction No. 254
UL Construction No. Wind-Uplift - Class 90 (See Item No. ) / Fire Not Investigated Metal Roof Deck Panels* Snap-Clad No. MSG or No. MSG min. thickness coated steel panels. Panels in. wide max., 0 in. wide
More informationCustom Stripmaster & Custom Stripmaster Lite Wire Strippers
Custom Stripmaster & Custom Stripmaster Lite Wire Strippers Unique blade design covers a wide range of precision commercial and military stripping applications One-step spring action wire stripping increases
More informationSTAND OUT! Offset, Digital and Large Format Solutions. Standard Modern is a full service printing, mailing and fulfillment company.
STAND OUT! Offset, Digital and Large Format Solutions Standard Modern is a full service printing, mailing and fulfillment company. www.standardmodern.com Communicate your message Indoor? Outdoor? For today?
More informationJESSUP JESSUP. GLO BRITE FILMS Photoluminescent rolls and sheets. Adhesive Coated Films. Adhesive Coated Films. Jessup Manufacturing Company
JESSUP Adhesive Coated Films GLO BRITE FILMS Photoluminescent rolls and sheets Jessup Manufacturing Company 2815 West Route 120 McHenry, Illinois 60051 jessupmfg.com 2017 Jessup Manufacturing Company All
More informationConstruction Standard No:
Page: 1 of 5 GENERAL * This Construction Standard governs trace wire installation on water mains. A 14 gauge or larger trace wire shall be installed on all water mains. Exception: Water mains as part of
More informationPORTABLE UNITS BASKETBALL SCHELDE SUPER SAM MULTI-ADJUST
PORTABLE UNITS SCHELDE SUPER SAM MULTI-ADJUST Highest class unit with regulated projection (within range of 245-325 cm) equipped with SAM (Spring Assisted Mechanism) - unique solution which avails to set
More information