THE WORLDWIDE GRAPHIC LANGUAGE FOR DESIGN
|
|
- Shon Fisher
- 5 years ago
- Views:
Transcription
1 THE WORLDWIDE GRAPHIC LANGUAGE FOR DESIGN
2 OBJECTIVES 1. Describe the role of drawings in the design process. 2. Contrast concurrent versus traditional design processes. 3. List five professions that use technical drawings. 4. Describe four creativity techniques. 5. Explain why standards are important. 6. Identify uses of the graphic language.
3 UNDERSTANDING THE ROLE OF TECHNICAL DRAWINGS Technical drawings serve one of three purposes:!!! Visualization Communication Documentation (Courtesy of Seymourpowell.) (Courtesy of Woods Power-Grip Co., Inc.)
4 Concept Sketches Exploring many design options through quick sketches (Courtesy of Lunar Design.)
5 The Stages of the Design Process 1. Problem identification: First, a clear statement of the need for and objectives for the design must be written. 2. Ideation: Technical sketches are often used to convey concepts to multidisciplinary teams. 3. Refinement/analysis: Designs may be rethought, based on engineering analysis. CAD models and sketches are useful during the analysis and compromise stage. Accurate 2D or 3D CAD models and drawings are created to refine the design. 4. Implementation/documentation: Production and/or working drawings providing the details of manufacture and assembly are finalized and approved.
6 Concurrent Engineering Traditionally, design and manufacturing activities have taken place in sequential order rather than concurrently (simultaneously). This step-by-step approach seems logical, but in practice it has been found to be wasteful. Concurrent engineering is a systematic approach that integrates the design and manufacture of products with the goal of optimizing all elements involved in the life cycle of the product. The Concurrent Process
7 ENGINEERING DESIGN STAGE 1 Identify the Customer and the Problem The engineering design process begins with recognizing or identifying these needs and considering the economic feasibility of fulfilling them. A successful design must not only solve the problem but also meet the needs and wishes of the customer. (Project developed and created by Philips Design.)
8 ENGINEERING DESIGN STAGE 2 Generate Concepts During this stage, often called the ideation stage, many ideas reasonable and otherwise are collected. The ability to freely create technical sketches lets you present and share ideas and record them so you can refer to solutions, inspirations, and breakthroughs that come to light during this creative stage of the process. (Courtesy of Seymourpowell.)
9 ENGINEERING DESIGN STAGE 3 The design team selects various features of the concepts generated in the ideation stage and combines them into one or more promising compromise solutions. Compromise Solutions 2D CAD Drawing. (Courtesy of Seymourpowell.) Many of these problems are solved graphically, using schematic drawings in which various parts are shown in skeleton form. For example, pulleys and gears are represented by circles, an arm by a single line, and a path of motion by centerlines
10 ENGINEERING DESIGN STAGE 4 Design teams often construct a model to scale to study, analyze, and refine a design. Models and Prototypes 3D CAD Model of the SAAR Brake. (Courtesy of Dynojet Research, Inc.) 3D CAD Model. This 3D CAD model of a design for the Mars rover was constructed to act as a virtual prototype for the design. (Courtesy of Byron Johns.)
11 Rapid Prototyping Rapid prototyping systems allow designers to generate parts quickly, directly from 3D models, for mockup and testing. Rapid Prototyping. The ZPrinter 450 from Zcorp printed the colored part shown in about four hours. (Courtesy of Z Corporation.)
12 Assembly Drawings An assembly drawing, shows how all the parts go together in the complete product.
13 ENGINEERING DESIGN STAGE 5 Production or Working Drawings The drawings, showing the necessary views, include the material, dimensions, required tolerances, notes, and other information needed to describe each part sufficiently for it to be manufactured consistently. These drawings of the individual parts are also known as detail drawings. Detail Drawing for the SAAR Brake Air Can Mounting Bracket. (Courtesy of Dynojet Research, Inc.)
14 DRAFTING STANDARDS There are standards that support a uniform, effective graphic language for use in industry, manufacturing, engineering, and science.!!! In the United States, providing these standards has been the work of the American National Standards Institute (ANSI) with the American Society for Engineering Education (ASEE), the Society of Automotive Engineers (SAE), and the American Society of Mechanical Engineers (ASME). International standards, often defined by the International Organization for Standardization (IOS), and the ASME or ANSI standards for drawing practices are similar in many respects.
15 CREATIVITY TECHNIQUES How do you develop new ideas? Examine Manufactured Products Study the Natural World Research Patent Drawings Watch the Web Design Groups The following websites are useful for engineering design: Yahoo s site for the latest technology news and a one-week archive site from CMP media U.S. Patent Office on-line search site
16 PRODUCT DEFINITION Product definition refers to the collection of digital or hard copy documents that specify the physical and functional requirements for a product.
17 SHOWING THE DESIGN PROCESS IN A A portfolio is a representative sample of work that helps communicate your skills and talents, usually to a prospective employer or client. PORTFOLIO
18 The Digital Database All the information to manage, design, analyze, simulate, package, market, and manufacture a product can be shared with a diverse group of users through a single complex digital database.
19 LETTERING As a beginning drafter, you would do well to be conservative. Too much flair may cause unnatural lettering. One important point regarding lettering technique is to make letters consistent. Do not make a letter one way one time and another way next time. Also, keep Letters vertical and always use guidelines. A professional drafter should be able to letter rapidly with clarity and neatness. LETTERING SIZE. 1/8 for the text. ¼ for the header. LETTERING LEGIBILITY. Lettering should be dark, crisp, and sharp. HINTS FOR PROFESSIONAL LETTERING. Use guidelines. Guidelines should be so light that they do not reproduce. Protect the drawing by resting your hand on a clean protective sheet placed over the drawing. Lettering composition means spacing letters so that background areas look the same.
20 Vertical Capital Letters and Numbers
21 EXAMPLE
22 The distance between lines is 1/8 The size of text is 1/8 The size of header is ¼ All letters are CAPITAL
23 Alphabet of lines
24
25
26 U.S. Size Standard (inches) International Size Standard (mm) Sheet sizes E = 34x44 D = 22x34 C = 17x22 B = 11X17 A = 8.5x11 WE USE A0 = 841x1189 A1 = 594x841 A2 = 420x594 A3 = 297x420 A4 = 210x297
27
28 H/W (graded) -Alphabet of lines All lines on the drawing should to be dark, sharp and straight Construction line is the only line that should be light and thin
29 5/8 3/8 H/W. (GRADED) - LETTERING 3/8 Vertical layout or Horizontal layout 5/8 5/8 5/8 5/8 3/8 3/8
30 Horizontal layout 5/8 5/8 3/8 3/8 5/8 5/8 5/8 3/8 3/8
31 Title block Name of the company Drawing title (what is on the drawing) Drawing number Approval block Scale Sheet number
32 Title block Name of the drawing My name Your name Class number
THE WORLDWIDE GRAPHIC LANGUAGE FOR DESIGN C H A P T E R O N E
THE WORLDWIDE GRAPHIC LANGUAGE FOR DESIGN C H A P T E R O N E OBJECTIVES 1. Describe the role of drawings in the design process. 2. Contrast concurrent versus traditional design processes. 3. List five
More informationDFTG 1305 UNIT 1. Semester: Spring 2016 Class #: Term: SS Instructor: Mays ALSabbagh
DFTG 1305 UNIT 1 Semester: Spring 2016 Class #: 94412 Term: SS Instructor: Mays ALSabbagh Technical Drafting Unit One: Introduction to Drafting Chapter 1 : The World Wide Graphic language for Design Lecture
More informationUnit 1: Introduction to Drafting (Chapter1: World Wide Graphics)
Unit 1: Introduction to Drafting (Chapter1: World Wide Graphics) DFTG-1305 Technical Drafting Instructor: Jimmy Nhan Giesecke, Hill, Spencer, Dygdon, Novak, Lockhart, Goodman 1 OBJECTIVES 1. Professions
More informationCHAPTER 1 DESIGN AND GRAPHIC COMMUNICATION
CHAPTER 1 DESIGN AND GRAPHIC COMMUNICATION Introduction OVERVIEW A new machine structure or system must exist in the mind of the engineer or designer before it can become a reality. The design process
More informationChapter 6. Architectural Lines and Lettering
Chapter 6 Architectural Lines and Lettering Drafting Introduction Universal graphic language Uses lines, symbols, dimensions, and notes to describe a structure to be built Properly drawn lines are dark,
More informationREADING ARCHITECTURAL PLANS
READING ARCHITECTURAL PLANS ARCHITECTURAL DRAWINGS FOR A HOUSE Architectural drawings contain information about the size, shape, and location of all parts of the house ARCHITECTURAL DRAWINGS FOR A HOUSE
More informationCAD and Drafting Standards Working Drawings
CAD and Drafting Standards Working Drawings Gregory Mocko Introduction 2 The purpose of drawing or generating a CAD document is to communicate Essentially, since communication is the goal, some standards
More information- 9_12TI7973-QUIZ2 - Print Test
Page 1 of 12 Report: Test Answer Key District: Madison Test: Description: Unit B EDP Form: 501 1. Stereolithography, selective laser sintering, ballistic particle manufacturing, and laminated object manufacturing
More informationChapter 1 Introduction
Chapter 1 Introduction Contents Engineering drawing Drawing standards Drawing sheet Scale Lettering Line types Engineering Drawing Contents Engineering Drawing Effectiveness of Graphic Language 1. Try
More informationAlphabet of Lines Chapter 3
Alphabet of Lines Chapter 3 Sacramento City College EDT 300/ ENGR 306 EDT 300/306 - Basic Technical Drafting 1 Alphabet of Lines The design industry has agreed on a set of standard lines that are used
More informationBIG IDEAS. Personal design interests require the evaluation and refinement of skills. Learning Standards
Ministry of Education Area of Learning: APPLIED DESIGN, SKILLS, AND TECHNOLOGIES Art Metal and Jewellery Grade 12 BIG IDEAS Products can be designed for life cycle. Personal design interests require the
More informationBrief Introduction to Engineering Graphics The use of drawings to convey information. Sketching freehand straight edge
Brief Introduction to Engineering Graphics The use of drawings to convey information. Sketching freehand straight edge CAD drawings 2D drafting 3D model to 2D drawings 1 Different Graphical Representation
More informationReavis High School Curriculum Snapshot/Cover Page for Computer Aided Design (CAD)
Reavis High School Curriculum Snapshot/Cover Page for Computer Aided Design (CAD) Unit 1: Introduction In this unit, students will identify components of a Computer Aided Design (CAD) system and how to
More information1. is the modification of an existing product or process. A. Invention C. Recreation B. Innovation D. Enhancement
Introduction to Engineering Design Lewis-Palmer School District #38, Monument, Colorado Fall Semester 2008 Final Exam 1. is the modification of an existing product or process. A. Invention C. Recreation
More information2010 Academic Challenge
2010 Academic Challenge ENGINEERING GRAPHICS TEST STATE FINALS This Test Consists of 40 Questions Engineering Graphics Test Production Team Ryan K. Brown, Illinois State University Author/Team Leader Jacob
More informationTechnical Drawing 101 with AutoCAD 2018
Technical Drawing 101 with AutoCAD 2018 A Multidisciplinary Guide to Drafting Theory and Practice with Video Instruction Douglas Smith Antonio Ramirez Ashleigh Fuller SDC PUBLICATIONS Better Textbooks.
More information2003 Academic Challenge
Worldwide Youth in Science and Engineering 2003 Academic Challenge ENGINEERING GRAPHICS TEST - SECTIONAL Engineering Graphics Test Production Team Ryan Brown, Illinois State University Author/Team Coordinator
More informationUNIT Lines and Symbols
3 UNIT Lines and Symbols Various lines on a drawing have different meanings. They may appear solid, broken, thick, or thin. Each is designed to help the blueprint reader make an interpretation. The standards
More informationExpectations of a Portfolio for ID Professionals. David White President of DesignDesign Inc.
Expectations of a Portfolio for ID Professionals David White President of DesignDesign Inc. www.designdesignonline.com designdesignonline.com 3 Areas Learned Behavior The Individual Social Style Their
More information1: Assemblage & Hierarchy
What: 1: Assemblage & Hierarchy 2 compositional sequences o abstract, line compositions based on a 9 square grid o one symmetrical o one asymmetrical Step 1: Collage Step 2: Additional lines Step 3: Hierarchy
More informationENGINEERING GRAPHICS. Lecture 1: Introduction to Graphic Communication. Jazmin Ley University of Texas Rio Grande Valley
ENGINEERING GRAPHICS Lecture 1: Introduction to Graphic Communication Jazmin Ley University of Texas Rio Grande Valley Overview Graphics Communication in the Design Process Engineering Design Process:
More informationDrafting. Drafting and Design Technician
Drafting and Design Technician Program Description This program is designed to provide students with entry level skills in the fields of mechanical, electrical, civil and architectural drafting and/or
More informationContent Map For Career & Technology
Content Strand: Applied Academics CT-DD1-1 CT-DD2-1 CT-DD3-1 CT-DD4-1 Use math concepts in Use math concepts in Use math concepts in Use math concepts in design and engineering design and engineering design
More informationDRAFT MECHANICAL DRAWING
Industrial Technology History of Drafting 9-12 Curriculum Standard One: The student will understand, classify, and be familiar with historical events, from cave writings to computer aided drafting systems,
More informationFundamentals of Graphics Communication, 3/e Gary R. Bertoline & Eric N. Wiebe
Fundamentals of Graphics Communication, 3/e Gary R. Bertoline & Eric N. Wiebe http://highered.mcgraw-hill.com/sites/0072322098/ CHAPTER 1 Introduction to Graphics Communication and Sketching Chapter 1
More informationDrafting I. IC61 Summer TRADE AND INDUSTRIAL EDUCATION Career and Technical Education
Drafting I TRADE AND INDUSTRIAL EDUCATION Career and Technical Education IC61 Summer 2013 PUBLIC SCHOOLS OF NORTH CAROLINA State Board of Education Department of Public Instruction www.ncpublicschools.org
More informationArea of Learning: APPLIED DESIGN, SKILLS, AND TECHNOLOGY Drafting Grade 10 BIG IDEAS. Complex tasks require the sequencing of skills.
Area of Learning: APPLIED DESIGN, SKILLS, AND TECHNOLOGY Drafting Grade 10 BIG IDEAS Social, ethical, and sustainability considerations impact design. Complex tasks require the sequencing of skills. Complex
More informationORTHOGRAPHIC PROJECTIONS. Ms. Sicola
ORTHOGRAPHIC PROJECTIONS Ms. Sicola Objectives List the six principal views of projection Sketch the top, front and right-side views of an object with normal, inclined, and oblique surfaces Objectives
More informationCAD Mechanical Design I
EXAM INFORMATION Items 58 Points 85 Prerequisites NONE Course Length ONE SEMESTER Career Cluster ARCHITECTURE AND CONSTRUCTION MANUFACTURING SCIENCE, TECHNOLOGY, ENGINEERING AND MATHEMATICS Performance
More informationChapter 1 Overview of an Engineering Drawing
Chapter 1 Overview of an Engineering Drawing TOPICS Graphics language Engineering drawing Projection methods Orthographic projection Drawing standards TOPICS Traditional Drawing Tools Lettering Freehand
More informationTechnology Education Grades Drafting I
Technology Education Grades 9-12 Drafting I 46 Grade Level: 9, 10, 11, 12 Technology Education, Grades 9-12 Drafting I Prerequisite: None Drafting I is an elective course which provides students the opportunity
More informationUDS OVERVIEW Uniform Drawing System
UDS OVERVIEW Uniform Drawing System The Construction Specifications Institute 601 Madison Street Alexandria, VA 1994 CSI began development of UDS Organization and presentation of drawing sets Organization
More informationC H A P T E R E L E V E N
DIMENSIONING C H A P T E R E L E V E N Giesecke, Hill, Spencer, Dygdon, Novak, Lockhart, Goodman 1 OBJECTIVES 1. Use conventional dimensioning techniques to describe size and shape accurately on an engineering
More information2018 Conference Theme Imagine the Future"
2017-2018 ADDA Design Drafting Contest General Rules Instructor to submit entries per the directions listed below.. 51 st Annual Design Drafting Contest Entry Information 2018 Conference Theme Imagine
More informationComputer Aided Drawing: An Overview
Computer Aided Drawing: An Overview Dr. H. Hirani Department of Mechanical Engineering INDIAN INSTITUTE OF TECHNOLOGY BOMBAY Powai, Mumbai-76 hirani@me.iitb.ac.in Drawing: Machine/ Engineering/ Technical
More information2012 Academic Challenge
2012 Academic Challenge ENGINEERING GRAPHICS TEST STATE FINAL This Test Consists of 40 Questions Engineering Graphics Test Production Team Ryan Brown, Illinois State University Author/Team Leader Jacob
More informationThe type of drafting we will be studying is called mechanical drafting. It is the typical foundation of all drafting fields.
Design Drafting Lectures Lecture 1 Introduction: Tools and Trades Drafter Defined: Drafters translate ideas and sketches of engineers, architects, and scientists into detailed drawings which are used in
More informationStudy Unit. Auxiliary Views. This sneak preview of your study material has been prepared in advance of the book's actual online release.
Study Unit Auxiliary Views This sneak preview of your study material has been prepared in advance of the book's actual online release. iii Preview You re entering now into another subject area in your
More information2012 Academic Challenge
2012 Academic Challenge ENGINEERING GRAPHICS TEST SECTIONAL This Test Consists of 40 Questions Engineering Graphics Test Production Team Ryan Brown, Illinois State University Author/Team Leader Jacob Borgerson,
More information2014 New Jersey Core Curriculum Content Standards - Technology
2014 New Jersey Core Curriculum Content Standards - Technology Content Area Standard Strand Grade Level bands Technology 8.2 Technology Education, Engineering, Design, and Computational Thinking - Programming:
More informationProvläsningsexemplar / Preview
Provläsningsexemplar / Preview SS-ISO 2575:2010 (E) Contents Page Foreword...iv 1 Scope...1 2 Normative references...1 3 Terms and definitions...1 4 General...2 5 Colour...3 6 Summary table of all symbols...3
More information2004 Academic Challenge
2004 Academic Challenge ENGINEERING GRAPHICS TEST - SECTIONAL Engineering Graphics Test Production Team Ryan Brown, Illinois State University Author/Team Coordinator Kevin Devine, Illinois State University
More informationOptical Illusion Sketchbook Project Art 1201
Optical Illusion Sketchbook Project Art 1201 Before beginning our final optical illusion project, we need to practice drawing optical illusions so we will have a better understanding of how to construct
More informationEngineering Graphics. Class 2 Drafting Instruments Mohammad Kilani
Engineering Graphics Class 2 Drafting Instruments Mohammad Kilani Drafting Instruments A Design is as good as its instruments A engineering drawing is a highly stylized graphic representation of an idea.
More informationTECHNICAL DESIGN I (540)
DESCRIPTION The first assessment in a series, Technical Design I prepares students to develop technical knowledge and skills required to plan and prepare scale pictorial interpretations of engineering
More informationGUIDELINES FOR DRAFTING
UNIT 1 GUIDELINES FOR DRAFTING 1.1 Introduction The term draughting is used to describe the language of drafting in this book. It defines the terminology, symbology, conventions, and standards used in
More informationProject Lead the Way: Robotics Grades 9-12
Bemidji High School Industrial Standards Project Lead the Way: Robotics Grades 1.J 1.K 1.L 1.M 2.W 2.X 2.Z 2.AA 2.BB 2.CC 2.EE 2.FF 3.G 3.H 3.I 3.J characteristics and scope characteristics and scope characteristics
More informationPRODUCT DESIGN PROCESS
PRODUCT DESIGN PROCESS Introduction Product design has two aspects: technical design and aesthetic design. Technical design is process of defining all the performance and physical characteristics of a
More informationDesign Process. Hand Sketching for Interiors Developing Visual Illustration Techniques SDC. Better Textbooks. Lower Prices.
Design Process Hand Sketching for Interiors Developing Visual Illustration Techniques Rick L. Bartholomew, RID SDC P U B L I C AT I O N S Schroff Development Corporation Better Textbooks. Lower Prices.
More informationPASSAIC COUNTY TECHNICAL INSTITUTE 45 Reinhardt Road Wayne, NJ. Academic Curriculum Unit Planner. Multimedia & CAD. Course # S7120.
Multimedia & CAD Course # S7120 August 2018 Multimedia:CAD.docx Page 1 Unit Plan Title: Introduction to Proprietary & Open Source and Web-Based Programs 8.2.12.A.2 - Analyze a current technology and the
More informationCHAPTER 01 PRESENTATION OF TECHNICAL DRAWING. Prepared by: Sio Sreymean
CHAPTER 01 PRESENTATION OF TECHNICAL DRAWING Prepared by: Sio Sreymean 2015-2016 Why do we need to study this subject? Effectiveness of Graphics Language 1. Try to write a description of this object. 2.
More informationAutoCAD 2D-I. Module 1: Introduction to Drawing Tools. IAT Curriculum Unit PREPARED BY. January 2011
AutoCAD 2D-I Module 1: Introduction to Drawing Tools PREPARED BY IAT Curriculum Unit January 2011 Institute of Applied Technology, 2011 Module 1: Introduction to Drawing Tools Module Objectives After
More informationAABTKJX by Prentice Hall, Inc. A Pearson Company
Figure Number: 03-01 Page Number: Principal Items of Equipment. AABTKJX0 Figure Number: 03-02 Page Number: The T-square. AABTKJY0 Figure Number: 03-03 Page Number: Testing the Working Edge of the Drawing
More information2004 Academic Challenge
2004 Academic Challenge ENGINEERING GRAPHICS TEST - REGIONAL Engineering Graphics Test Production Team Ryan Brown, Illinois State University Author/Team Coordinator Kevin Devine, Illinois State University
More informationEngineering Design. Conveying Design Through. Engineering Graphics & the
Engineering Design Communication Conveying Design Through Graphics Chapter 1 Engineering g Graphics & the Design Process Engineering Graphics Used to: VISUALIZE COMMUNICATE DOCUMENT MANUFACTURE design
More information2017 Graphic Communication. Higher. Finalised Marking Instructions
National Qualifications 207 207 Graphic Communication Higher Finalised Marking Instructions Scottish Qualifications Authority 207 The information in this publication may be reproduced to support SQA qualifications
More informationIncluding: Synthesis of Ideas Justification and Recording Decisions Taken Presentation Techniques Modelling Techniques
Development & Refinement Including: Synthesis of Ideas Justification and Recording Decisions Taken Presentation Techniques Modelling Techniques Synthesis of Ideas Designers often start off with lots of
More informationDimensioning the Rectangular Problem
C h a p t e r 3 Dimensioning the Rectangular Problem In this chapter, you will learn the following to World Class standards: 1. Creating new layers in an AutoCAD drawing 2. Placing Centerlines on the drawing
More informationTest Code: 8294 / Version 1
Pennsylvania Customized Assessment Blueprint Test Code: 8294 / Version 1 Copyright 2014. All Rights Reserved. General Assessment Information Blueprint Contents General Assessment Information Written Assessment
More informationAlex Friedman s Portfolio
Alex Friedman s Portfolio Northwestern University McCormick School of Engineering Product Design Engineering Class of 2018 alexfriedman2018@u.northwestern.edu 857-294-4600 www.alexfriedman.me Engineering
More informationUNIT 5a STANDARD ORTHOGRAPHIC VIEW DRAWINGS
UNIT 5a STANDARD ORTHOGRAPHIC VIEW DRAWINGS 5.1 Introduction Orthographic views are 2D images of a 3D object obtained by viewing it from different orthogonal directions. Six principal views are possible
More informationStudent Name: Teacher: Date: District: Rowan. Assessment: 9_12 T and I IC61 - Drafting I Test 2. Description: Drafting 1 - Test 6.
Student Name: Teacher: Date: District: Rowan Assessment: 9_12 T and I IC61 - Drafting I Test 2 Description: Drafting 1 - Test 6 Form: 501 1. 2X on a hole note means: A. Double the size of the hole. B.
More informationMurrieta Valley Unified School District High School Course Outline December Course Title: Graphic Design III (Advanced Graphic Design)
I. Goals: Department: Visual and Performing Arts Murrieta Valley Unified School District High School Course Outline December 2013 Course Title: Graphic Design III (Advanced Graphic Design) Course Number:
More informationDigital Systems Design
Digital Systems Design Digital Systems Design and Test Dr. D. J. Jackson Lecture 1-1 Introduction Traditional digital design Manual process of designing and capturing circuits Schematic entry System-level
More information2003 Academic Challenge
Worldwide Youth in Science and Engineering 2003 Academic Challenge ENGINEERING GRAPHICS TEST - REGIONAL Engineering Graphics Test Production Team Ryan Brown, Illinois State University Author/Team Coordinator
More informationObjective Explain design concepts used to create digital graphics.
Objective 102.01 Explain design concepts used to create digital graphics. PART 1: ELEMENTS OF DESIGN o Color o Line o Shape o Texture o Watch this video on Fundamentals of Design. 2 COLOR o Helps identify
More informationSketching & Auto CAD (Computer Aided Design) - Mechanical Design
Western Technical College 10606113 Sketching & Auto CAD (Computer Aided Design) - Mechanical Design Course Outcome Summary Course Information Description Career Cluster Instructional Level Total Credits
More informationPlywood Desk Organiser Year 10 Term Assessment Task
Plywood Desk Organiser Year 10 Term 1-2018 Assessment Task Length: 11 Weeks Marks / value: 10D&T - 15% Date due: Design process folio - Week 11, Term 1-2018 Plywood Desk Organiser - Week 11, Term 1-2018
More informationIED Detailed Outline. Unit 1 Design Process Time Days: 16 days. An engineering design process involves a characteristic set of practices and steps.
IED Detailed Outline Unit 1 Design Process Time Days: 16 days Understandings An engineering design process involves a characteristic set of practices and steps. Research derived from a variety of sources
More informationFACTFILE: GCE TECHNOLOGY & DESIGN
FACTFILE: GCE TECHNOLOGY & DESIGN 1.8, 1.26, 1.56 DESIGN AND COMMUNICATION Design and Communication Learning outcomes Students should be able to: communicate designs using 2D methods, to include freehand
More information2013 Academic Challenge
2013 Academic Challenge ENGINEERING GRAPHICS TEST STATE FINALS This Test Consists of 40 Questions Engineering Graphics Test Production Team Ryan Brown, Illinois State University Author/Team Leader Jacob
More informationPROJECT LEAD The way. Quakertown community high school
PROJECT LEAD The way Quakertown community high school is a college recognized pre-engineering program designed to prepare students for the challenges of college classes. Quakertown Community High School
More informationChapter 8. Technical Drawings
Chapter 8 Technical Drawing Technical Drawings Multiview drawings Also called three-view drawings Simple objects take three views Front, top, one side Title block Identifies who did the design Gives date,
More informationTechnical Drawing 101 with AutoCAD 2019
Technical Drawing 101 with AutoCAD 2019 A Multidisciplinary Guide to Drafting Theory and Practice with Video Instruction Douglas Smith Antonio Ramirez Ashleigh Fuller SDC PUBLICATIONS Better Textbooks.
More informationPart 1: Common symbols
INTERNATIONAL STANDARD ISO 6405-1 Third edition 2017-02 Earth-moving machinery Symbols for operator controls and other displays Part 1: Common symbols Engins de terrassement Symboles pour les commandes
More informationMEDIA ARTS FOR DANCE. Georgia Standards of Excellence (GSE) HIGH SCHOOL Grade 9 Grade 12
MEDIA ARTS FOR DANCE Georgia Standards of Excellence (GSE) HIGH SCHOOL Grade 9 Grade 12 Table of Contents HIGH SCHOOL... 1 Media Arts for Dance... 3 May 3, 2018 Page 2 of 5 Media Arts for Dance Levels
More informationEngineering Drafting and Design I
Title Engineering Drafting and Design I Type Consensus Document Map Authors Steven Shuttlesworth, Paul Wood Subject Industrial/Technology Education Course Engineering Drafting and Design I Grade(s) 09,
More informationEngineering Graphics- Basics.
Engineering Graphics- Basics DRAWINGS: ( A Graphical Representation) The Fact about: If compared with Verbal or Written Description, Drawings offer far better idea about the Shape, Size & Appearance of
More informationSAMPLE ASSESSMENT TASKS MATERIALS DESIGN AND TECHNOLOGY ATAR YEAR 12
SAMPLE ASSESSMENT TASKS MATERIALS DESIGN AND TECHNOLOGY ATAR YEAR 1 Copyright School Curriculum and Standards Authority, 015 This document apart from any third party copyright material contained in it
More informationIntroduction. From DREAM... Everything starts with an idea or concept in your mind. To DRAWING... The dream is given form by putting it on paper.
1 Introduction Then David gave his son Solomon the plans for the portico of the temple,its buildings, its storerooms, its upper parts, its inner rooms... (1 Chronicles 28:11 NIV) From DREAM... Everything
More informationSketch the layout and dimensions of your deck. Use the graph paper below to determine measurements and the number of kits you will need.
Sketch the layout and dimensions of your deck. Use the graph paper below to determine measurements and the number of kits you will need. 2 A Select your straight and stair rail kits. All straight and stair
More informationMISS. HANNA S CLASSROOM RULES
MISS. HANNA S CLASSROOM RULES 1. My students never fail. I believe in you and so shall you! Miss. Hanna s Quote! 2. Come to class on time. 3. Bring a positive attitude. 4. Come prepared and bring your
More informationMECH2400 MECHANICAL DESIGN 1 LECTURE NOTES
MECH2400 MECHANICAL DESIGN 1 LECTURE NOTES Shane Leviton Contents Introduction:... 3 Assessments:... 3 Engineering Drawing... 3 Layout drawings... 3 Proposal drawings... 4 Engineering drawings... 4 Graphical
More information2009 New Jersey Core Curriculum Content Standards - Technology
P 2009 New Jersey Core Curriculum Content s - 8.1 Educational : All students will use digital tools to access, manage, evaluate, and synthesize information in order to solve problems individually and collaboratively
More information2D GRAPHIC DESIGN: POSTER (MIXED)
2D GRAPHIC DESIGN: POSTER (MIXED) NON-PERFORMANCE EVENT DIGITAL ENTRY School Customer No. City Code Country Entry Composition Distinct contrast in colour 5 Colour tones of graphics are balanced 5 Harmonious
More information2014 COMPANY PROFILE
204 COMPANY PROFILE OUR VISION QUALITY POLICY AVM strives to build long-term partnership with customers by delivering constant productivity benefits thereby creating long term, dedicated relationships
More information3. The dimensioning SYMBOLS for arcs and circles should be given:
Draft Student Name: Teacher: District: Date: Wake County Test: 9_12 T and I IC61 - Drafting I Test 2 Description: 4.08 Dimensioning Form: 501 1. The MINIMUM amount of space between two, ADJACENT DIMENSION
More informationMultiview Projection
DFTG-1305 Technical Drafting Prof. Francis Ha Session 4 Multiview Projection (or Orthographic Projection) Reading: Geisecke s textbook: 14 th Ed. Chapter 5 p.162 15 th Ed. Chapter 6 p.232 Update: 17-0510
More informationDesign thinking, process and creative techniques
Design thinking, process and creative techniques irene mavrommati manifesto for growth bruce mau Allow events to change you. Forget about good. Process is more important than outcome. Don t be cool Cool
More informationBelow are the desired outcomes and usage competencies based on the completion of Project 4.
Engineering Design with SolidWorks Project 4 Below are the desired outcomes and usage competencies based on the completion of Project 4. Project Desired Outcomes: An understanding of the customer s requirements
More informationGraphic Design: BFA Portfolio Review
Graphic Design: BFA Portfolio Review Instructions For Submission Page: 1 Table of Contents Pages: 2-3 General Information: Portfolio Instructions & Requirements Page: 4 Acceptable Sizes: Portfolios & Presentation
More informationWAYNESBORO AREA SCHOOL DISTRICT CURRICULUM INTRODUCTION TO ENGINEERING
UNIT: Classroom rules and procedures NO. OF DAYS: 2 KEY LEARNING(S): Expectations and classroom procedures UNIT : What are the expectations and classroom procedures in the CAD room 3.4.12.A3. Demonstrate
More informationElementary Dimensioning
Elementary Dimensioning Standards Institutions ANSI - American National Standards Institute - creates the engineering standards for North America. ISO - International Organization for Standardization -
More informationTIME SCHEDULE. Module Topic Periods 1 Importance of Engineering Graphics Drawing Instruments Drawing Standards Lettering and Numbering
COURSE TITLE : ENGINEERING GRAPHICS (First Semester) COURSE CODE : COURSE CATEGORY : F PERIODS/WEEK : 3 PERIODS/SEMESTER : 54 CREDITS : Examination in the Second Semester RATIONALE: Engineering Graphics
More informationACT-IED-1. Students will identify the disciplines related to engineering drawing and design professions.
PROGRAM CONCENTRATION: CAREER PATHWAY: COURSE TITLE: Architecture, Construction, Communications & Transportation Engineering Drawing & Design Introduction to Engineering Drawing and Design Introduction
More informationEngineering Working Drawings Basics
Engineering Working Drawings Basics Engineering graphics is an effective way of communicating technical ideas and it is an essential tool in engineering design where most of the design process is graphically
More informationIndustrial Tech Framework Alexandria Public Schools. April, 2009
Industrial Tech Framework Alexandria Public Schools April, 2009 Table of Contents: Mission Statement...3 Committee Membership...3 Woods/Metals (7 th Gr.)...4 Design Modeling (PLTW)...4 Science of Technology
More informationLAB 1A: Intro to SolidWorks: 2D -> 3D Brackets
LAB 1A: Intro to SolidWorks: 2D -> 3D Brackets Set units Create Sketch Add relations Linear patterns Mirror Fillet Extrude Extrude cut First, set units. click Option on top of main menu Open Document Properties
More informationDetailing. Data Integrity Check. Knowledge Based Engineering. Points Covered: Modeling & Detailing. 3D Modeling
Points Covered: Modeling & Detailing Detailing 2D drawings Creation Process Drawing, BOM release in PLM (ECO\ECN) 3D Tolerance analysis & GD&T 3D Modeling Top Down Design & Large assembly management CAD
More information5 th Year DCG Design Project (Easter Exam 2017)
5 th Year DCG Design Project (Easter Exam 2017) There have been many changes to handheld electronic games controllers over the last thirty years. These developments consist of changes to shape and form
More information