ADDENDUM NO. 2 March 15, 2018

Size: px

Start display at page:

Download "ADDENDUM NO. 2 March 15, 2018"

Henry Lane
5 years ago
Views:

1 ADDENDUM NO. 2 March 15, 2018 PROJECT: MT. VIEW ELEMENTARY CASSIA SCHOOL DISTRICT NO 151 BURLEY, IDAHO The following addenda apply to the Project Manual and / or Drawings for this project and shall be a part of the Contract Documents. Receipt of this Addendum shall be acknowledged on the Bid Form. PROJECT MANUAL Section Carpeting Revise paragraph 2.1.A.1.a to read as follows 2.1.A.1.a Shaw, No Rules Diffuse Tile Revise paragraph 2.1.A.1.c to read as follows 2.1.A.1.c Mohawk, QB 384 Awareness Tile Add the following paragraph A.2.2.C A.2.2.C Carpet Base with binding and cap 1. Shaw, Diffuse / Disperse Precoat 6, to be used as 4 high base. 2. Patcraft, Color Choice Ultraloc, to be used as 4 high base. 3. Mohawk, BC309 In the Loop, to be used as 4 high base Section Aluminum framed entrances and storefronts Revise paragraph 2.1.A.3 to read as follows: 2.1.A.3 a. Kawneer North America / 500 Heavy Wall, wide stile. b. Oldcastle (Vistawall) / 500 Heavy Wall, wide stile. AMBER VAN OCKER BROOK THORNTON - WAYNE THOWLESS 2400 E. Riverwalk, BOISE, IDAHO PHONE FAX

2 DRAWINGS Sheet A1.2 Sheet A3.2 Sheet SL1.1 Sheet A8.4 Sheet A8.5 Sheet A11.1 Revise keyed note F1 to read, Aluminum Faced Cladding Panel with Concealed Fasteners. At Toilet A113 provide (1) Changing station, Koala Kare, KB200-SS at south wall, provide all backing in stud wall for attachment. Add the following to Reference Note 2: Provide new single ply TPO membrane and associated roofing assemblies at existing mechanical well as shown on Addendum Drawings ADD through ADD 02-06, attached. At detail 2, revise exterior keyed note to be B2 in lieu of A1 Revise detail 5/A8.5 as shown on Addendum Drawing ADD and provide all items shown on associated Addendum Drawing ADD 02-02, attached. Revise the reflected ceiling plan at Library B119 location per Addendum Drawing ADD 02-07, attached. ELECTRICAL ADDENDUM ITEMS Refer to Payne Engineering Inc letter titled Electrical Addendum dated March 15, 2018, attached, along with associated sketches, shall be part of this Addendum and part of the Contract Documents for this project. MECHANICAL ADDENDUM ITEMS Refer to Engineered Systems Associates letter title Addendum No. 2 dated March 15, 2018, attached along with associated sketches, shall be part of this Addendum and part of the Contract Documents for this project. END OF ADDENDUM NO. 2 AMBER VAN OCKER BROOK THORNTON - WAYNE THOWLESS 2400 E. Riverwalk, BOISE, IDAHO PHONE FAX

3 ATTACHMENTS Addendum Drawings ADD through ADD Payne Engineering, Electrical Addendum Engineered Systems Associates, Addendum No. 2 AMBER VAN OCKER BROOK THORNTON - WAYNE THOWLESS 2400 E. Riverwalk, BOISE, IDAHO PHONE FAX

11 ELECTRICAL ADDENDUM March 15, 2018 Brook Thornton LKV Architects 2400 E. Riverwalk Dr. Boise, Idaho RE: Mt. View Elementary School Remodel Sheet E1.1 & E3.1: 1. Ceiling in half of the Library changed to a Gyp. Board Sloped Ceiling, lighting and Special Systems in this portion of the Library has modified. See Attached Sketch Sheets SK-E1,E2,E3 & E4. Sheet E2.0: 1. The new 400A disconnect for new Air Handler AH-5 shall be a Fused Type disconnect. Fused per equipment nameplate rating East Center Street Pocatello, Idaho (208) Fax (208)

12 END OF ELECTRICAL ADDENDUM 1823 East Center Street Pocatello, Idaho (208) Fax (208)

13 6 7 F4 F4 J 1 F11 F12 B-2 1 F12E F1 SPD F8E F12 F11 CD1 S F11 CD3 S F Library B119 F12 F11 F11E NL H F3E F8 (TYP) CD1 S KEY NOTES: # 1 1 UTILIZE EXISTING LIGHTING CIRCUIT THAT ORIGINATED IN AREA; FIELD VERIFY HOMERUN LOCATON AND PROVIDE NEW CONTROLS AS INDICATED. 2 E.C. SHALL FIELD COORDINATE INSTALLATION OF FIXTURES WITH EXPOSED MECHANICAL DUCTWORK. E.C. SHALL ALSO FIELD COORDINATE SUSPENSION LENGTHS OF FIXTURES WITH ARCHITECT PRIOR TO FINAL INSTALLATION TO PROVIDE ARCHITECTURAL LOOK OF FIXTURES WITH SPACE. 3 E.C. SHALL RELOCATE ALL EXISTING J-BOXES IN CEILING SPACE OF LIBRARY AREA AS REQUIRED FOR INSTALLATION OF NEW GYP. BOARD CEILING AND IN ORDER TO MEET NEC REQUIREMENTS FOR ACCESSIBILITY OF ELECTRICAL BOXES. PE#: Engineering Inc. Consulting Engineers 1823 E. Center Pocatello, Idaho tel (208) fax (208) Mt. View Elementary School Floor Plan - Area B Lighting Sheet Reference: Project number Date Drawn by Revision #: E1.1 SK-E1 03/13/18 SAM 1 Scale: 1/8" = 1'-0"

14 PARTIAL LIGHTING FIXTURE SCHEDULE TYPE FIXTURE DESCRIPTION MOUNTING VOLTS LAMPS MFGR. CATALOG # NOTES F11 4FT STRIP FIXTURE, ROUND DIFFUSE LENS, AIRCRAFT CABLE SUSPENSION SUSPENDED 120 LED-3000LM- 4000K LITHONIA CLX-L LM-SEF-RLD-120-GZ10-40K-80CRI- SCBA-ZACFPD120 1,3 F11E F12 F12E 4FT STRIP FIXTURE, ROUND DIFFUSE LENS, AIRCRAFT CABLE SUSPENSION, EMERG. BATTERY PACK 8FT STRIP FIXTURE, ROUND DIFFUSE LENS, AIRCRAFT CABLE SUSPENSION 8FT STRIP FIXTURE, ROUND DIFFUSE LENS, AIRCRAFT CABLE SUSPENSION, EMERG. BATTERY PACK LIGHT FIXTURE SCHEDULE NOTES: SUSPENDED 120 LED-3000LM- 4000K SUSPENDED 120 LED-6000LM- 4000K SUSPENDED 120 LED-6000LM- 4000K LITHONIA LITHONIA LITHONIA CLX-L LM-SEF-RLD-120-GZ10-40K-80CRI- PS1050-SPD-SCBA-ZACFPD120 CLX-L LM-SEF-RLD-120-GZ10-40K-80CRI- SCBA-ZACFPD120 CLX-L LM-SEF-RLD-120-GZ10-40K-80CRI- PS1050-SPD-SCBA-ZACFPD REFER TO DRAWINGS FOR FIXTURES DESIGNATED TO BE DUAL-LEVEL SWITCHED OR 0-10V DIMMING. PROVIDE REQUIRED SWITCH-LEGS AND CONDUCTORS FOR CONTROL AS SHOWN ON DRAWINGS. 2. FIXTURE TO BE CONTINUOUS ROW MOUNTED LENGTH AS INDICATED ON DRAWINGS, PROVIDE ACCESSORIES REQUIRED FOR CONTINUOUS MOUNTING. 3. COORDINATE COLOR WITH ARCHTITECT PRIOR TO ORDERING. 4. FIELD ADJUST PENDANT LENGTH AS REQUIRED, VERIFY LENGTH WITH COUNTER AS DIRECTED BY ARCHITECT. 5. REFER TO ARCHITECTURAL ELEVATION DRAWINGS FOR PLACEMENT AND MOUNTING HEIGHT OF FIXTURES. 1,3 1,3 1,3 PE#: Engineering Inc. Consulting Engineers 1823 E. Center Pocatello, Idaho tel (208) fax (208) Mt. View Elementary School Partial Light Fixture Schedule Sheet Reference: E1.2 Project number Date Drawn by Revision #: 03/13/18 Author SK-E2 Scale: See Drawing

15 6 7 8 J FIELD VERIFY EXACT MTG LOCATION WITH OWNER 1 TV 2D-4 +60" TS 2D-4 CP 1D-3 C3R Library B119 WAP 1D-3 H WAP 1D-3 1 W2R C4R Stor. B120 IP-P1 2D-4 2D-4 CAM Toilet A113 PT CS1R 2D-4 1 PE#: Engineering Inc. Consulting Engineers 1823 E. Center Pocatello, Idaho tel (208) fax (208) Mt. View Elementary School Floor Plan - Area B Special Systems Sheet Reference: Project number Date Drawn by Revision #: E3.1 SK-E3 03/13/18 Author 1 Scale: 1/8" = 1'-0"

16 INTERCOM/CLOCK/BELL SYSTEM SCHEDULE ID MANUFACTURER DESCRIPTION MOUNTING QTY NOTES 1 CEILING SPEAKER C1R VALCOM ANALOG ONE-WAY CEILING MOUNTED SPEAKER W/ RECESSED BACKBOX RECESSED - GYP. CEILING 7 C2R VALCOM ANALOG ONE-WAY CEILING MOUNTED SPEAKER W/ RECESSED BACKBOX RECESSED - LAY IN 3 C3R VALCOM IP TALK-BACK 8" CEILING MOUNTED SPEAKER W/ RECESSED BACKBOX RECESSED - GYP. CEILING 1 C4R VALCOM IP TALK-BACK 8" CEILING MOUNTED SPEAKER W/ RECESSED BACKBOX RECESSED - LAY IN 1 CLOCK/SPEAKER COMBO CLK1S VALCOM WALL MOUNTED IP SPEAKER/CLOCK COMBO 2-WAY SPEAKER W/ SURFACE 10 BACKBOX AND WIREGUARD CS1R VALCOM WALL MOUNTED IP SPEAKER/CLOCK COMBO 2-WAY SPEAKER W/ BACKBOX RECESSED 25 MISC. COMPONENTS PT VALCOM PUSH TO TALK CALL BUTTON RECESSED, 1-GANG BOX 32 WALL SPEAKER W1S VALCOM ONE-WAY FLEX HORN, WEATHERPROOF W/ WEATHERPROOF BACKBOX SURFACE 10 W2R VALCOM ANALOG ONE-WAY WALL MOUNTED SPEAKER W/ RECESSED BACKBOX RECESSED 10 W2S VALCOM ANALOG ONE-WAY WALL MOUNTED SPEAKER W/ SURFACE BACKBOX SURFACE 4 1 PE#: Engineering Inc. Consulting Engineers 1823 E. Center Pocatello, Idaho tel (208) fax (208) Mt. View Elementary School Intercom/Clock/Bell System Schedule Sheet Reference: E3.1 Project number Date Drawn by Revision #: SK-E4 03/13/18 Author 1 Scale: See Drawing

17 Engineered Systems Associates 1355 East Center Pocatello, ID ADDENDUM NO.2 March 15, 2018 PROJECT NAME: Mountain View Elementary Specifications: 1. Add attached Specification Plumbing Fixtures. Drawings: 1. Make Ductwork Changes as noted in sketches M1.2A and M2.1A Attached. Prior Approvals: Rooftop HVAC Units: Please stay with Seasons 4 or Annexair as specified under base bid. Engineered Air, Energy Labs and Venmar may also provide alternate pricing to be evaluated by the School District. Include Alternate Equipment Form attached with your bid. END OF ADDENDUM Addendum 2

18 ALTERNATE EQUIPMENT PROPOSED SUBSTITUTE MATERIALS The total sum of the Bidder's proposal shall include the furnishing and installing of all materials, equipment, and labor as called for in the contract documents as a base bid. Hereafter give the total amount to be added or deducted for a complete installation of equipment or materials other than those specified and those approved by addendum are submitted for the Owner's consideration. All materials and equipment proposed for substitution shall be listed below and must meet the requirements of the contract documents. During the time of consideration of the proposals, complete information shall be submitted immediately to the Architect and Owner's Representative. Proposed Substitute Manufacturer and Catalog Numbers $ Add $ Deduct

21 SECTION PLUMBING FIXTURES PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings, General Provisions of Contract, including General and Supplementary Conditions and Section apply to this Section. 1.2 SUMMARY A. Furnish and install plumbing fixtures as described in Contract Documents. B. Before fixtures are ordered, the Contractor shall submit a complete list of plumbing fixtures, giving the catalog number, cut and make, for approval. Fixtures shall not be ordered until this list is approved. PART 2 - PRODUCTS 2.1 GENERAL A. Interior exposed pipe, valves, and fixture trim shall be chrome plated. B. Do not use flexible water piping. C. Flow Control Fittings: 1. Vandal proof type and fit faucet spout of fixture used. Flow shall be controlled as required by local codes. D. Furnish and install the necessary plumbing fixtures in quantity as shown on plans. Provide all necessary valves, chrome plated 17 gauge or cast "P" traps, stops with risers, fittings, and accessories to make the job complete with the fixtures specified on the drawings. Exposed stops to be equal to Brasscraft with compression inlet, chrome plated nipples, cross handles, ¼ turn ball valves and flexible risers. E. Fixtures shall be PROFLO, Kohler, Crane, Briggs, Eljer, American Standard, or an approved equal. Specialties shall be Zurn, Josam, MiFab, J. R. Smith, Wade, or Watts. F. Toilet seat manufacturers shall be Beneke, Church, Olsonite, or Bemis. G. Carrier and wall hydrant manufacturers shall be Smith, Zurn, Wade, Josam, or Watts. H. Mop sink manufacturers shall be Stern-Williams or Fiat. I. Stainless steel sink manufacturers shall be Elkay or Just. J. Drinking fountain manufacturers shall be Elkay, Halsey Taylor, Haws, Cordley, Sunroc, or Oasis. K. Pressure balance mixing valves shall be Powers, Lawler, Leonard, or Symmons. L. Stainless steel showers and wash fountains shall be Bradley or Acorn. M. Thermostatic mixing valves shall be Powers. Mountain View Elementary School PLUMBING FIXTURES

22 N. Provide GSR "Fuseseal" flame retardant acid resisting pipe and fittings where shown. Provide slip joint union connections on all traps and connections to equipment. PART 3 - EXECUTION 3.1 INSTALLATION A. Install fixtures including traps and accessories with accessible stop or control valve in each hot and cold water branch supply line. B. Mounting Refer to Architectural Elevations: 1. Urinals: a. Standard - 20 inches from floor to bottom lip. b. Handicap - 17 inches from floor to bottom lip. C. Make fixture floor connections with approved brand of cast iron floor flange, soldered or calked securely to waste pipe. D. Make joints between fixtures and floor flanges tight with approved fixture setting compound or gaskets. E. Caulk between fixtures and wall and floor with white butyl rubber non-absorbent caulking compound. Point edges. F. Cleanouts: Provide and set full size cleanouts at foot of each riser, and ends of branches from toilets, at points where a change of direction occurs, on exposed and accessible traps, at points where required to remove rust accumulation or other obstructions and as shown on plans. Set screw cap in cleanout with graphite paste. Location of all cleanouts subject to approval of inspector. G. Traps: Install "P" traps in branch lines from floor drains or where required. Traps installed in connection with threaded pipe shall be recess drainage pattern. Traps installed in connection with cast iron pipe shall be of the same quality and grade as the pipe. Traps installed in connection with fixtures shall have a seal of not less than 2" nor more than 4". Exposed traps shall be chrome plated cast brass or chrome plated 17 gauge tubular type. Provide trap primers as required by Code. 3.2 FIXTURE INSTALLATION A. Provide stop valves and 18" minimum air chambers on all water connections to fixtures. Furnish and install wall carriers for wall mounted fixtures, wood backing, where necessary, to be installed by General Contractor at the direction of this Contractor. Provide exact locations, including proper mounting heights, obtained from details on drawings and from manufacturer's specifications. Provide hudee rims for countertop installations. B. Interior exposed pipe, valves, and fixtures trim shall be chrome plated. C. Complete installation of each fixture including trap and accessories with accessible stop or control valve in each hot and cold water branch supply line. Make fixture floor connections with approved brand of cast iron floor flange, soldered or caulked securely to waste pipe. Make joint between fixture and floor flange tight with approved fixture setting compound or gaskets. D. Polish chrome finish at completion of project. Caulk between fixtures and wall and floor with white butyl rubber non-absorbent caulking Mountain View compound. Paint all edges. E. Install fixtures and fittings as per local codes and manufacturer's instructions. END OF SECTION Mountain View Elementary School PLUMBING FIXTURES

A. This Section includes plumbing fixtures and related components.

A. This Section includes plumbing fixtures and related components. SECTION 224200 PLUMBING FIXTURES PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification