To: All Holders of the Virginia Department of Transportation s 2001 Road and Bridge Standards
|
|
|
- Stephen Barton
- 5 years ago
- Views:
Transcription
1 DEPARTMENT OF TRANSPORTATION 1401 EAST BROAD STREET RICHMOND, VIRGINIA PHILIP A. SHUCET COMMISSIONER July 21, 2004 MOHAMMAD MIRSHAHI, P.E. STATE LOCATION AND DESIGN ENGINEER MEMORANDUM To: All Holders of the Virginia Department of Transportation s 2001 Road and Bridge Standards The following is a list of standards contained in the 2001 Road and Bridge Standards that have been revised. Please add these pages to your copy of the standards. An insertable sheet will not be required in plan assemblies. PAGE STANDARD REVISION N/A N/A N/A The following is a list of revised standards to the 2001 Road and Bridge Standards that do require an insertable sheet to be in included in your plan assembly until the next edition of the imperial standards is published. Please add these pages to your copy of the standards. The respective insertable sheet number has been placed with the revised standard. An insertable sheet is available for each of these revised standards. The insertable sheets are available on VDOT s web site on the FTP server and in Falcon DMS for VDOT personnel. These insertable sheets will be required in plan assemblies for projects utilizing the standard items listed below that have not been to advertisement prior to January, PAGE INSERT STANDARD REVISION A57 EW-12 Revised note A158 DI-9 Revised riser pipe dimension A86 PB-1 Revised transposed dimensions For S1 and S2 on normal earth foundation no projection ISD570 PG-2A Revised concrete surface area for TY A1 D=8" from.0759 to VirginiaDot.org WE KEEP VIRGINIA MOVING
2 PAGE INSERT STANDARD REVISION ISD ESC-INS Revised ditch reference notes A159 MS-1 Revised minimum width A159 MS-1A Revised minimum width A59 CG-12 Added ramp length table A59 CG-12 Added ramp length table A161 RW-3 Revised annotation of porous backfill A133 GR-3 Revised notes A133 GR-3 Clarified anchor dimensions, revised notes A132 GR-6 Revised rail length in detail A A89 GR-7 Revised notes and clarified details A89 GR-7 Deleted page A89 GR-7 Chaged sheet reference A136 GR-SP Revised notes ISD2390 GR-9 Revised notes and clarified details A96 MB-12A,B,C Revised references to barrier shapes for transition details A160 FE-W1,W2 Added brace dimensions A160 FE-B Added brace dimensions A152 FE-CL Revised references to federal specification for post designations.
3 PAGE INSERT STANDARD REVISION A152 FE-6 Revised notes. Revised grounding details A68 HR-1 Revised handrail height, added grounding details A149 RFD-1 Revised general notes A149 RFD-1 Revised notes, and table to specify dimensions A156 SSP-VA Revised sign panel installation details A156 SSP-VIA Revised sign panel installation details A154 OSS-1 Revised notes, catwalk details, fixed object offset distance, and electrical installation details A154 OSS-1 Revised notes, catwalk details, fixed object offset distance, and electrical installation details A155 OSS-1 Revised sign panel erection details and sign lighting details A155 OSS-1 Revised sign panel erection details and sign lighting details A157 OSS-1 Revised sign panel installation details A157 SPD-1 Revised sign panel installation details. If you have any questions or comments regarding the listed revisions to this publication, please contact Mr. Steve Van Cleef of the Engineering Services Section at (804) Sincerely, Mohammad Mirshahi, P.E. State Location and Design Engineer
4 INSERTABLE SHEET A57
5 INSERTABLE SHEET A158
6 INSERTABLE SHEET A86
7 INSERTABLE SHEET ISD570
8 INSERTABLE SHEET ISD414.04
9 INSERTABLE SHEET A159
10 INSERTABLE SHEET 159
11 INSERTABLE SHEET A59
12 INSERTABLE SHEET A59
13 INSERTABLE SHEET A161
14 INSERTABLE SHEET A133
15 INSERTABLE SHEET A133
16 INSERTABLE SHEET A132
17 INSERTABLE SHEET A89
18
19 INSERTABLE SHEET A89
20 INSERTABLE SHEET A136
21 INSERTABLE SHEET ISD2390
22 INSERTABLE SHEET A96
23 INSERTABLE SHEET A160
24 INSERTABLE SHEET A160
25 INSERTABLE SHEET A152
26 INSERTABLE SHEET A152
27 INSERTABLE SHEET A68
28 INSERTABLE SHEET A149
29 INSERTABLE SHEET A149
30 INSERTABLE SHEET A156
31 INSERTABLE SHEET A156
32 INSERTABLE SHEET A154
33 INSERTABLE SHEET A154
34 INSERTABLE SHEET A155
35 INSERTABLE SHEET A155
36 INSERTABLE SHEET A157
37 INSERTABLE SHEET A157
REVISIONS INDEX 2016 ROAD & BRIDGE STANDARDS. September 2017 Revision Letter August 2017 Revision Letter February 2017 Revision Letter
REVISIONS INDEX 2016 ROAD & BRIDGE STANDARDS September 2017 Revision Letter August 2017 Revision Letter February 2017 Revision Letter 506.08 ADDED DETAIL FOR TRANSITION FROM GR-MGS1 TO WEAK POST GUARDRAIL.
REVISIONS INDEX 2016 ROAD & BRIDGE STANDARDS
REVISIONS INDEX 2016 ROAD & BRIDGE STANDARDS December 2018 Revision Letter September 2018 Revision Letter September 2017 Revision Letter August 2017 Revision Letter February 2017 Revision Letter Signature
Ohio Department of Transportation Office of Traffic Engineering July 17, 2009
Ohio Department of Transportation Office of Traffic Engineering July 17, 2009 To Holders of the OTE Standard Construction Drawings (SCDs) and Plan Insert Sheets (PISs): As of July 17, 2009, fifteen SCDs
Allow 2 on either side extra at the eave. Allow 2 on either side extra for the base of the house. Min. 22 for wheels
Road Allowances Minimum road allowance required from ditch to ditch 22 for our wheels to travel. Trees overhanging the road is always a potential problem area. If a house is moving along a treed road,
Ohio Department of Transportation Office of Roadway Engineering January 18, 2013
Ohio Department of Transportation Office of Roadway Engineering January 18, 2013 To: Holders of the Traffic Standard Construction Drawings (SCDs) and Plan Insert Sheets (PISs) As of January 18, 2013, eighteen
Public Projects Plan Submittal Guidelines Revised August 4, 2017 Plan submittal Process: 10% Plans 25% Plans 30% Plans 60% Plans 90% Plans
Plan submittal Process: 10% Plans - Based on survey and include detailed horizontal geometry per Public Project Checklist. 25% Plans - Plans include profiles, typical sections, phasing & cross sections
STANDARD DRAWINGS INDEX MODIFIED FOR CENTRAL REGION Revised August 6, 2018
SYMBOLS STANDARD DRAWINGS INDEX No Statewide Standard - Use Regional A3 Legend Detail Sheet BRIDGE AND STRUCTURES B-08.00 Bin Walls 1 CONSTRUCTION-BARRICADES AND SIGNING C-04.12 Location of Double Traffic
MATERIALS DIVISION MEMORANDUM
MATERIALS DIVISION MEMORANDUM GENERAL SUBJECT: Precast Concrete and Concrete Pipe Quality Control/Quality Assurance Programs SPECIFIC SUBJECT: Sections 204.22(c), 204.26(d) and Minimum Acceptance Sampling
ASSEMBLY INSTRUCTIONS TF Tent Flooring System. 125 Taylor Parkway Archbold, Ohio Phone: (419) Fax: (419)
125 Taylor Parkway Archbold, Ohio 43502 Phone: (419) 445-8915 Fax: (419) 445-0367 www.biljax.com TF-2100 Tent Flooring System ASSEMBLY INSTRUCTIONS ALL DRAWINGS ARE FOR ILLUSTRATION ONLY Revision: 1 1/21/16
CHAPTER 11 SURVEY CADD
CHAPTER 11 SURVEY CADD Chapter Contents Sec. 11.01 Sec. 11.02 Sec. 11.03 Sec. 11.04 Sec. 11.05 Sec. 11.06 Sec. 11.07 Sec. 11.08 Sec. 11.09 Sec. 11.10 General Description of Survey File Contents of Survey
This specification describes the minimum requirements for structural steel drawings.
1/7 1.0 PURPOSE This specification describes the minimum requirements for structural steel drawings. 2.0 GENERAL As stated in specification SPEC-0800, drawings are intended to be Design drawings. Sufficient
City of Regina Standard Construction Specifications SECTION LIST OF SEWER STANDARD DRAWINGS
City of Regina Standard Construction Specifications SECTION 14999 LIST OF SEWER STANDARD DRAWINGS S-1 No Drawing Feb/10 S-2 Precast Manhole 1050mm Dia. July/10 S-2B Precast Manhole 1200mm Dia. Jan/17 S-3
MAINTENANCE HOLES, CATCH BASINS AND DITCH INLETS - MTC FORM 407 INDEX
407-1 - MAINTENANCE HOLES, CATCH BASINS AND DITCH INLETS - MTC FORM 407 INDEX 407-1.1 GENERAL Tender Items Specifications Standard Drawings 407-1.1.1 Frame and Grate Selection 407-1.1.2 Selection of Structure
Street Acceptance Guidelines
Street Acceptance Guidelines Fairfax County Guidelines Flowcharts and Examples October 1, 2009 Table of Contents: Procedural Guidelines Fairfax County Street Acceptance Process Overall Procedure...2 Contact
Florida's Turnpike Enterprise Roadway Phase III (90%) & Phase IV (100%) Check List Per FDM and TDH Part 3
Notes to Reviewers Section 301 Design Exceptions, Variation, and Technical Memorandums Special directives date and source Key Sheet Section 302 Location Map w/ location of project on map All applicable
CAT-350 Product Manual
CAT-350 Product Manual Release 01/17 www.ingalcivil.co.nz CAT-350 NZ Assembly Manual Ingal Civil Products NZ 40 Tironui Road, Auckland 2112 www.ingalcivil.co.nz Important: These instructions are for standard
E:\Wilmot\DGN\14018pp.dgn 3/11/2015 6:49:16 AM
600-06 SHOULDER WIDENING FOR TYPE (SPECIAL) GUARDRAIL TERMINALS E:\Wilmot\DGN\08pp.dgn //05 6:9:6 AM E:\DGN\08SUP.dgn //05 ::55 PM E:\DGN\08SUP.dgn //05 :8:0 PM E:\DGN\08-WRG.dgn //05 :8:5 PM E:\DGN\08SM.dgn
MSD STANDARD DRAWINGS LOUISVILLE AND JEFFERSON COUNTY METROPOLITAN SEWER DISTRICT 700 WEST LIBERTY STREET LOUISVILLE, KENTUCKY
MSD M etr o p olitan S e w e r Di s t r ict STANDARD DRAWINGS LOUISVILLE AND JEFFERSON COUNTY METROPOLITAN SEWER DISTRICT 700 WEST LIBERTY STREET LOUISVILLE, KENTUCKY 40203-1911 STANDARD DRAWINGS DIVISION
Determine the proper ground fixing stair position, by using, as a reference, the landing tread [Fig. 7].
![Determine the proper ground fixing stair position, by using, as a reference, the landing tread [Fig. 7].](/thumbs/82/86224479.jpg "Determine the proper ground fixing stair position, by using, as a reference, the landing tread [Fig. 7].")
METAL SPIRAL STAIR MOUNTING INSTRUCTIONS - ENGLISH - PRELIMINARY OPERATIONS Prior to fitting your staircase, please check the packaging content. You then place all components onto a wide surface in order
VOLUME V PART 8 STEEL BEAM WITH TIMBER DECK SUPERSTRUCTURE STANDARDS
VOLUME V PART 8 STEEL BEAM WITH TIMBER DECK SUPERSTRUCTURE STANDARDS VIRGINIA DEPARTMENT OF TRANSPORTATION COMMONWEALTH of VIRGINIA Gregory A. Whirley COMMISSIONER DEPARTMENT OF TRANSPORTATION 1401 EAST
Multi-Stage ASSEMBLY INSTRUCTIONS ST-8100 SERIES. 125 TAYLOR PARKWAY ARCHBOLD, OH PHONE: (419) FAX: (419)
125 TAYLOR PARKWAY ARCHBOLD, OH 43502 PHONE: (419) 445-8915 FAX: (419) 445-0367 www.biljax.com Multi-Stage ST-8100 SERIES ASSEMBLY INSTRUCTIONS ALL DRAWINGS ARE FOR ILLUSTRATION ONLY. PRINTED IN U.S.A.
City of Vaughan Engineering Department DESIGN STANDARD DRAWINGS
City of Vaughan Engineering Department DESIGN STANDARD DRAWINGS March 2004 STANDARD DRAWINGS Partners With The Environment March 2004 FORWARD The March 2004 version of the City of Vaughan Design Standard
Street Acceptance Guidelines
Street Acceptance Guidelines Fairfax County Guidelines Flowcharts and Examples October 1, 2009 Table of Contents: Procedural Guidelines Overall Procedure... 2 Contact Information... 2 Initial Street Acceptance
Digitally Signed 06/02/2015
Digitally Signed 06/0/05 Digitally Signed 06/0/05 Digitally Signed 06/0/05 FED. ROAD DIST. NO. STATE FED. AID PROJ. NO. SHEET NO. TOTAL SHEETS 6--5 6 ARK. JOB NO. 08057 6 8 075 QUANTITIES 5706 SUMMARY
Section 808. FENCING
808.01 Section 808. FENCING 808.01. Description. This work consists of providing and erecting, or moving existing, woven wire fence, temporary fence, protective fence, chain link fence, high-tensile wire
B PERMANENT INTERMEDIATE SIGNS AND SUPPORT SYSTEMS - SSP 799S17
B799-10 - PERMANENT INTERMEDIATE SIGNS AND SUPPORT SYSTEMS - SSP 799S17 799-4.1 GENERAL A permanent ground mounted intermediate sign support system is defined as a permanent sign(s) and its breakaway support
DEVELOPMENT PLAN CHECKLIST
Project Identification Information: DEVELOPMENT PLAN CHECKLIST 1.0 GENERAL 1.1 Additional information as required by specific Land Use 1.2 All sheets to include sheet number ( of ) 1.3 Seal and signature
DOCUMENT SUBMITTAL REQUIREMENTS FOR A NEW MULTI-FAMILY DWELLING
INFORMATION BULLETIN / GENERAL INFORMATION REFERENCE NO.: None DOCUMENT NO. P/GI 2014-007 Previously Issued As: P/GI 2011-007 Effective: 01-01-2014 Revised: DOCUMENT SUBMITTAL REQUIREMENTS FOR A NEW MULTI-FAMILY
MPA Project No. M495-C1 Refrigerated Container Storage Improvements Project Location: Conley Terminal, Boston, MA
MPA Project No. M495-C1 Refrigerated Container Storage Improvements Project Location: Conley Terminal, Boston, MA RESPONSES TO QUESTIONS and/or RFI s Date: 12/7/2017 The attention of Contractors submitting
Contents. Prologue 27. Chapter 1: Introducing AutoCAD 29 Introduction 30. Getting Started with the Set-Up 31
vii Contents Prologue 27 Chapter 1: Introducing AutoCAD 29 Introduction 30 Downloading a Free Copy of AutoCAD 30 Getting Started with the Set-Up 31 Launching AutoCAD 31 The Welcome Screen 31 The Application
CONTENTS TOOL LIST U P S I D E I N N O V A T I O N S, L L C RAMP AND STEP SYSTEM ASSEMBLY INSTRUCTIONS. Revised: June 2013
U P S I D E I N N O V A T I O N S, L L C RAMP AND STEP SYSTEM ASSEMBLY INSTRUCTIONS TOOL LIST Required Tools: - Reciprocating Saw with Metal Cutting Blade - Drill - 7/16 Drill Bit for Metal Drilling -
SUPPLEMENTARY STANDARD DETAIL DRAWINGS
CITY OF MAPLE RIDGE DESIGN AND CONSTRUCTION DOCUMENTS Part 4 SUPPLEMENTARY STANDARD DETAIL DRAWINGS September 2015 Updated: October 2015 THIS PAGE INTENTIONALLY LEFT BLANK City of Maple Ridge Supplementary
APPLICATION FOR A BUILDING PERMIT
APPLICATION FOR A BUILDING PERMIT City of San Jacinto 595 S. San Jacinto Ave San Jacinto CA 92583 95.487.7330 fax 95.654.9896 Must print legibly, submit (3) sets of building and plot plans. Fill out all
Continuous Handrail Kit Installation Instructions
Continuous Handrail Kit Installation Instructions ALUMINUM RAILING SYSTEM Canadian Version Wall Application (see page 2) Railing Application (see page 7) Wall anchors not provided Hardware included: 1x
ADDENDUM NO. 4 TO THE CONTRACT DOCUMENTS SUPPLEMENTAL INFORMATION
July 6, 2011 City of Miami Fire Station #13 ADDENDUM NO. 4 TO THE CONTRACT DOCUMENTS SUPPLEMENTAL INFORMATION This Addendum is issued to modify the previously issued Bidding and Contractual Documents,
JUNE 27, 2016 ADDENDUM NO. 1 TO THE CONTRACT DOCUMENTS SYRACUSE HANCOCK INTERNATIONAL AIRPORT CULVERT REPLACEMENT FOR RUNWAY 28 APPROACH ACCESS ROAD
JUNE 27, 2016 Addendum No. 1 Page 1 of 2 ADDENDUM NO. 1 TO THE CONTRACT DOCUMENTS SYRACUSE HANCOCK INTERNATIONAL AIRPORT CULVERT REPLACEMENT FOR RUNWAY 28 APPROACH ACCESS ROAD FAA AIP PROJECTS NO. 3-36-0114-XXX-16
ALUMINUM POLE VAULT STANDARDS SPECIFICATIONS
SPECIFICATIONS Specifications: All aluminum construction for superior corrosion resistance. Dual height scales provide English and Metric measurements ranging from 7' to 8'. Wide stance base for improved
SECTION G ESTIMATE OF QUANTITIES
PROJECT STATE OF SOUTH DAKOTA NH 2115(45)87 SHEET G2 TOTAL SHEETS G27 SECTION G ESTIMATE OF QUANTITIES BID ITEM NUMBER ITEM QUANTITY UNIT 009E0010 Mobilization Lump Sum LS 560E0068 7'x3' Precast Concrete
Tools & Materials Needed
15/16" ALUMINUM RAILING SYSTEM Installation Guide Canadian Version Tools & Materials Needed Hacksaw or metal cutting saw Drill Drill bits: 1/8", 5/32", 3/16", 7/32", 1/4" 3/8" socket or wrench Phillips
2-PIECE STAIRWAY ASSEMBLY
REVISED 2/12/15 2-PIECE STAIRWAY ASSEMBLY STEP 1: LAY OUT THE RIGHT AND LEFT SIDE TOP AND BOTTOM RISER PANELS AS SHOWN IN FIGURE 1. BOLT THE SPLICE PLATE (#15114C for OSHA F SERIES; #15412C for BOCA U
TRAFFIC ENGINEERING DIVISION
VIRGINIA DEPARTMENT OF TRANSPORTATION TRAFFIC ENGINEERING DIVISION MEMORANDUM GENERAL SUBJECT: Radio Systems/Highway Signs SPECIFIC SUBJECT: Use of Radio Systems by VDOT & Localities: HAR and TIS Informational
below on Thursday, November 16, 2017 which is scheduled to commence at 10:30 a.m. in Room 17-59))
This document is scheduled to be published in the Federal Register on 11/24/2017 and available online at https://federalregister.gov/d/2017-25412, and on FDsys.gov 6712-01 FEDERAL COMMUNICATIONS COMMISSION
SurvCADDR. Section - Profile Module. File Modify Display Draw Inq-Set Pnts Profiles Design Sections Misc PRODUCT DESCRIPTION BENEFITS & ADVANTAGES
File Modify Display Draw Inq-Set Pnts Profiles Design Sections Misc SurvCADDR Section - Profile Module PRODUCT DESCRIPTION engineeringsoftwareforanexpandinguniverse The Section - Profile Module creates
Gate Installation Instructions
Gate Installation Instructions Every installation is unique and requires decisions to be made on the job by the installer. Specific performance requirements, soil conditions, climate conditions, and other
Lesson 17. The Focus of this lesson is:
The Focus of this lesson is: Inserting beams between frames to support Roof Top Units or concentrated loads Loading the roof beams so they design Locating a roof framed opening Lesson Comments: This lesson
TEMECULA, CA SITE PLAN PROJECT SUMMARY UNIT MIX 2 CAR GARAGE (20' X 20") PARKING SUMMARY OPEN SPACE SUMMARY REQUIRED: REQUIRED: PROVIDED: PROVIDED:
GATE 9 GATE 9 9 0 0 0 POOL 0 RECREATION 0 PROJECT SUMMARY SITE PLAN NOTES OWNER/DEVELOPER LOT COVERAGE BUILDING AREA 9,0 S.F. = % C/O AMBIENT COMMUNITIES PARKING AREA, S.F. = % ROB HONER PUJOL ROW, S.F.
L182 - Installation Sheet Modular Wine Rack ( Wall Mount )
Modular Wine Rack ( Wall Mount ) 1A 1B 2B 2A Cross Bar Options: 1A 2A 1B 2B Modular Wine Rack ( Wall Mount ) Parts Rail LED arm modules Wine bottle cross bars Rail cover Setscrew cover 1) Drill holes and
Installation Instructions HR910 International Compliant Handrail
Important 1. Acclimate materials 24 hrs before installation. Maintain temperature controlled environment after installation. 2. Install in accordance with manufacturer s installation instructions. Failure
A LUMINIUM. Modular Handrail Installation Guide. Tools and Materials Required. Hardware Included. See WARNING on inside panel
A LUMINIUM Handrail Modular Handrail Installation Guide WALL APPLICATION BALUSTRADE APPLICATION see page 3 see page 11 Tools and Materials Required Mitre saw with non-ferrous metal cutting blade Drill
Bestall Collaborative Limited Planning Environment Construction Management Development
November 18, 2017 Bestall Collaborative Limited Lori Hight, AICP, Senior Planner City Development Department City of Thornton City Hall 9500 Civic Center Drive Thornton, Colorado 80229-4326 RE: River Valley
EMMEGI ARCHITECTURAL FENCING MASTER SPECIFICATION SECTION METAL FENCING, GATES & RAILING SYSTEM PART 1 GENERAL
EMMEGI ARCHITECTURAL FENCING MASTER SPECIFICATION SECTION 05720 METAL FENCING, GATES & RAILING SYSTEM PART 1 GENERAL EMMEGI ARCHITECTURAL FENCING is a high quality steel fencing system comprised of a hybrid
Riff Tables RIFF-NIC, BAR HEIGHT AND TENNIS TABLE ASSEMBLY INSTRUCTIONS
Riff Tables RIFF-NIC, BAR HEIGHT AND TENNIS TABLE ASSEMBLY INSTRUCTIONS 84" & 72" LONG RIFF TABLE COMPONENTS Top QTY 2 Leg Assembly 2 3 Support Assembly 4 Cross Rail 5 Brace 2 6 000599/Leveler 4 7 #8 x
Accelerated Bridge Construction (ABC) and the Utah Experience
Accelerated Bridge Construction (ABC) and the Utah Experience by Kris Peterson, P.E., UDOT Mary Lou Ralls, P.E., Ralls Newman, LLC AASHTO Subcommittee on Construction Annual Meeting Computers and Technology
Free-standing Barrial Installation of free-standing Barrial
Installation of free-standing Barrial Important comments Detailed setting out drawing All Barrial products are supplied with a detailed setting out drawing and a parts list. The detailed setting out drawing
Standard 25 Wide Structure
Standard 25 Wide Structure Truss Arch Style 2 piece 12ft c/c typical Arch Depth 12 Webbing Diameter 1/2 1 run straight 2 runs straight Wind Brace - up to 120 8 Wind Brace - up to 192 12 Wind Brace - over
6/19/2014. Milton Madison Bridge Slide. Project Partners. The Challenge. Aaron L. Stover, PE, SE Michael Baker Jr., Inc.
Kentucky Society of Professional Engineers May 23 rd, 2014 Lexington KY Milton Madison Bridge Slide Aaron L. Stover, PE, SE Michael Baker Jr., Inc. Project Partners The Challenge Milton, KY Existing Bridge
7141 & NATIONAL POLE VAULT STANDARDS SPECIFICATIONS
SPECIFICATIONS Specifications: This standard has a clamping system and a handle added for ease of operation. The clamping system is above the base pad protectors when in the lowest position and the tightening
Standard Plate 7036 is discontinued. It is replaced by Standard Plan Pedestrian Curb Ramp Details.
DEVELOPED BY: Design Standards ISSUED BY: Office of Program Management & Technical Support, Design Support Section TRANSMITTAL LETTER NO. (12-02) MANUAL: Standard Plates DATED: May 11, 2012 SUBJECT: Standard
ASSEMBLY INSTRUCTIONS
ASSEMBLY INSTRUCTIONS PRINTED IN USA Assembly Instructions Include: P/N: LL-04-5 Step : Site Preparation Step 0: Guard Rail Installation Step : Leg Assembly Step : Stairs Step 3-8: Setting the Stage Step
CHAIN LINK FENCING DOCUMENT NUMBER: APPLICATION: ELEMENTARY, MIDDLE AND HIGH SCHOOL
CHAIN LINK FENCING DOCUMENT NUMBER: 02800 APPLICATION: ELEMENTARY, MIDDLE AND HIGH SCHOOL DATE OF ISSUE: 06-02-98 - miscellaneous revisions 08-06-97 - miscellaneous clarifications 06-02-97 - miscellaneous
Your order will be shipped with the supports and rail components packaged inside the ramp package. Each accessory package is labeled.
instructions About Your Order. Your order will be shipped with the supports and rail components packaged inside the ramp package. Each accessory package is labeled. Check the Order Before the Carrier leaves!
Index Pipe Hangers and Straps
Index Pipe Hangers and Straps Fig. 1 Standard Clevis Hanger MSS-SP-69, Type 1 WW-H-171E, Type 1 Page 14 Fig. 1CI Clevis Hanger for A.W.W.A. Page 16 Fig. 81 Clevis Hanger WW-H-171E, Type 12 Page 70 Fig.
Joint with Bent Dowels. David Cronin, P.E. City Engineer. Jason Hoskinson, P.E., PTOE BG Consultants, Inc. DATE: January 23, 2014
1405 Wakarusa Drive Lawrence, KS 66049 P : 785 749 4474 F : 785 749 7340 TO: FROM: David Cronin, P.E. City Engineer Jason Hoskinson, P.E., PTOE BG Consultants, Inc. DATE: January 23, 2014 RE: Rock Chalk
Installation Instructions
Installation Instructions 200 Series Curtainwall 3056 WALKER RIDGE DR. NW, SUITE G WALKER, MI 49544 800-866-2227 dependable@tubeliteinc.com Revised April 2014 dependable@tubeliteinc.com Page 1 TABLE OF
Compliance with this acceptable construction practice satisfies Performance Requirement P2.5.2 for balustrades or other barriers.
Page 1 of 5 PART 3.9 SAFE MOVEMENT AND ACCESS 2010 Edition PART 3.9.2 BALUSTRADES Acceptable construction practice 3.9.2.1 Application Compliance with this acceptable construction practice satisfies Performance
8" PIVOT. Model 8000 Pivot - Prior to Feb 2002
" PIVOT Model 000 Pivot - Prior to Feb 00 " Pivot Table of Contents Description Rev. # Pg. # Overall Assembled View... 0-0... Legs & Braces... 0-0... Ladder... 0-0... Collector Ring "J" Tube... 0-0...
The Castle House Assembly Instructions By Laser Dollhouse Designs
The Castle House Assembly Instructions By Laser Dollhouse Designs HOUSE PARTS First floor slots labeled 1A-1G First floor Walls labeled 1A-1G First floor interior door frames (4) Wall 1A frames (6) Main
Residential & Industrial Fence
Residential & Industrial Fence Assembly Instructions CONTENTS 02: OVERVIEW & CONTENTS 03: PRODUCT SPECIFICATIONS 04: GETTING STARTED 05: WALL ATTACHMENT & LINE POST ASSEMBLY 06: CORNER POST ASSEMBLY 07:
Existing and Design Profiles
NOTES Module 09 Existing and Design Profiles In this module, you learn how to work with profiles in AutoCAD Civil 3D. You create and modify profiles and profile views, edit profile geometry, and use styles
The Missouri Department of Transportation is proposing to amend the state's five-year Statewide Transportation Improvement Program (STIP).
The Missouri Department of Transportation is proposing to amend the state's five-year Statewide Transportation Improvement Program (STIP). A 7-day public comment period regarding the amendment begins February
Triangle Mobility Action Partnership (Tri-MAP)
Triangle Mobility Action Partnership (Tri-MAP) Friday, October 20, 2017 Coordinated by the Regional Transportation Alliance Hosted by the Research Triangle Foundation Welcome and Introductions Maeve Gardner
OHIO DEPARTMENT OF TRANSPORTATION CENTRAL OFFICE, 1980 W. BROAD ST., COLUMBUS, OHIO
OHIO DEPARTMENT OF TRANSPORTATION CENTRAL OFFICE, 1980 W. BROAD ST., COLUMBUS, OHIO 43216-0899 July 20, 2012 To: Users of the Standard Bridge Drawings From: Tim Keller, Administrator, Office of Structural
RADIO AND TELEVISION TOWER & EQUIPMENT PROPERTY DAMAGE APPLICATION
RADIO AND TELEVISION TOWER & EQUIPMENT PROPERTY DAMAGE APPLICATION Date of Report: Reported By: Office: Frequency: Address: 1. Broadcasting Co. Principal Mailing Address: Call Letters: Tower Location:
MONKEY LADDER A25188E ASSEMBLY INSTRUCTIONS WARNING
MONKEY LADDER A25188E ASSEMBLY INSTRUCTIONS FORT 1.36m 3.36m 1.44m 5.44m WARNING To reduce the risk of serious injury or death, you must read and follow these instructions. Keep and refer to these instructions
PORCH-LOC INSTALLATION INSTRUCTIONS
PORCH-LOC INSTALLATION INSTRUCTIONS 2017 HB&G Building Products, Inc. Porch-Loc Installation Instructions NOTE: DISCARD THE INSTALLATION INSTRUCTIONS AND HARDWARE THAT CAME IN YOUR PERMAPOST PACKAGING
1.8 METER SERIES 1194 ANTENNA SYSTEM
January 14, 2002 REVISION G ASSEMBLY MANUAL 1.8 METER SERIES 1194 ANTENNA SYSTEM PRODELIN CORPORATION 1500 Prodelin Drive Newton NC 28658 1.8 METER SERIES 1194 ANTENNA SYSTEM G Revise Address 1/14/02 F
Millwork Product Catalog
Millwork Product Catalog www.beckermillworkanddoors.com Contact Information Physical address: 5555 51st Ave. S Fargo ND 58104 Mailing Address: PO Box 10206 Fargo ND 58106 Phone: 701-239-9395 Fax: 701-239-8171
Appendix C Construction Details
7172 Kennedy Road Warrenton, Virginia 20187 Appendix C Construction Details November 2017 TABLE OF CONTENTS THRUST BLOCKS Anchorage for 11 1/4 o, 22 1/2 o & 45 o Upper Vertical Bends... AV 01 Buttresses
GENERAL ELEVATION SECTION A-A
NORTH OR WEST Final pavement Elev. m @ roadway 12 352 out to out precast backwall panels Final pavement Elev. m @ roadway SOUTH OR EAST Pile cut-f Elev. m Pile cut-f Elev. m 3:1 3:1 Approx. existing groundline
HOENER ASSOCIATES INC. ARCHITECTS
HOENER ASSOCIATES INC. ARCHITECTS BRUCE D. DELL MARK REUTHER ADDENDUM NO. 1 PROJECT 15-22C RENOVATION AND SITE WORK AT: BUILDING B DDRB OF ST. CHARLES DEVELOPMENT DISABILITIES RESOURCE BOARD ST. CHARLES,
November 16, 2017 BOARD OF COUNTY COMMISSIONERS ORANGE COUNTY, FLORIDA. Y CH / Addendum #6 SHERRY DRIVE BRIDGE REPLACEMENT
November 16, 2017 BOARD OF COUNTY COMMISSIONERS ORANGE COUNTY, FLORIDA Y18-703-CH / Addendum #6 SHERRY DRIVE BRIDGE REPLACEMENT REVISED BID OPENING DATE: DECEMBER 5, 2017 This addendum is hereby incorporated
OFFICE OF MANAGEMENT AND FINANCE
CITY OF PORTLAND OFFICE OF MANAGEMENT AND FINANCE Charlie Hales, Mayor Fred Miller, Chief Administrative Officer Ken Rust, Director, Bureau of Revenue and Financial Services Christine Moody Chief Procurement
Noise walls Some Noise Facts
What is noise? Noise is unwanted sound. Noise is perceived differently by every individual. A noise that is irritating one person may be tolerant to another. Sound is transmitted by pressure variations
Midwest Roadside Safety Facility
B 64" 1626 602'-8 1/16" 183695 548'-0" 167030 1 2 3 4 5 6 7 8 9 10 11 12 14 15 16 17 18 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 373839 40 25 IMPACT 1500A 48" 12 27'-5" 8355 [] 3x7 CL A Galvanized
RADIO AND TELEVISION TOWER & EQUIPMENT PROPERTY DAMAGE APPLICATION
Hull & Company Dallas P: (972) 789-1962 F: (972) 789-1967 Houston P: (281) 759-4855 F: (281) 759-7245 hullandco-texas.com RADIO AND TELEVISION TOWER & EQUIPMENT PROPERTY DAMAGE APPLICATION The following
CITY OF PITTSBURG ENGINEERING DEPARTMENT CONTRACT NO A WATER TREATEMENT PLANT CAPITAL IMPROVEMENTS PHASE 1A ADDENDUM #1 FENCE AND DITCH AUGUST
CITY OF PITTSBURG ENGINEERING DEPARTMENT CONTRACT NO. 2012-16A WATER TREATEMENT PLANT CAPITAL IMPROVEMENTS PHASE 1A ADDENDUM #1 FENCE AND DITCH AUGUST 2014 CHAIN LINK FENCE SPECIFICATIONS Chain link fence,
Open Up Your View With CABLE SYSTEMS
Open Up Your View With CABLE SYSTEMS PRESENTED BY CROWN HERITAGE Our Cable Multiple options to accomodate any deck or stair design Marine Grade 316 stainless steel Swaging is the term used for attaching
INTRINSICALLY SAFE DUPLEXER
INTRINSICALLY SAFE DUPLEXER MADE IN THE U.S.A. DESCRIPTION The Intrinsically Safe Duplexer, ISD, is a low cost SCADA ready intrinsically safe pump controller designed to perform level control for duplex
STEEL PIPE GUIDERAIL 01/01/
NOTES PIPE RAILING & POSTS: Pipe Rails and s shall be in accordance with ASTM A5 Grade B for standard weight pipe and ASTM A500 Grade B, C or D or ASTM A50 for structural tube. Bars for handrail supports
ALUMINUM PIPE GUIDERAIL 01/01/
NOTES PIPE RAILING & POSTS: Structural Tube, Pipe and Bar shall be in accordance with ASTM B22 or ASTM B429, Alloy 606-T6. End Rail 90 bends and corner bends with maximum 4-0" post spacing, may be Alloy
Installation Instructions for the AlphaDeck Staging System
Installation Instructions for the AlphaDeck Staging System Step 1 - Preparation A. Before setting up your system, determine the location where the stage will be installed and locate all the parts you will
AERINOS Profisens - Wireless IoT Platform
Introduction AERINOS ProfiSens is a local area wireless IOT platform. It comprises wireless sensor nodes and a 3G Data Gateway. Using ProfiSens, you can deploy anywhere your private IOT network. The battery
Installation Instructions for. Handrail Component System
Handrail STEP-BY-STEP Installation Instructions for Handrail Component System Rise in Inches Run in Inches 8 8.5 9 9.5 10 10.5 11 11.5 12 12.5 13 13.5 14 14.5 15 8.5 47 45 43 42 40 39 38 36 35 34 33 32
BID TABULATION SHEET
Title: Guide Rail & Guide Rail Parts Opening Date: Thursday, January 5, 2017 @ 2:00 pm Contract #: CC-0039-17 Total Bids Received: Signed Proposal Stock Disclose BID TABULATION SHEET Non- Collusion Affirm
The theoretical concept
Overview shield connection terminals he theoretical concept Part 1 of the VDE 0133 standard specifies the required equipotential bonding for the electrical components of a machine. he aim is to prevent
MH Table of Contents Standard Title/Scope Page Table of Contents SCE Public
MH Table of Contents Standard Title/Scope MH 300 MH 310 MH 318 MH 320 MH 325 MH 330 MH 335 MH 340 MH 350 Manholes Requirements MH 300.1 Manholes Requirements...........................................
SECTION R507 DECKS DECKING LEDGER BOARD BEAM. FOOTING BEAM SPAN CANTILEVER For SI: 1 inch = 25.4 mm FIGURE R507.2 DECK CONSTRUCTION
SECTION R507 DECKS R507.1 Application. The provisions of this section shall provide prescriptive requirements for the design and construction of all uncovered, wood-framed, single-span exterior decks.
AUXILIARY FRAMING AND ACCESSORIES
CUSTOM CABINETS & RACKS STRUT AND ACCESSO- RIES JUNCTION KITS ANGLE AND BRACE KITS SPLICE KITS BRACE KITS INSTALLATION KITS WALL ANGLE KITS RUBBER END CAPS SUPPORT INSTALLATION AND SUPPORT KITS STANCHION
Post & Rail Fencing. Product Guide. Post and Rail Fence Styles. Post Sizes
Post & Rail Fencing Back to Webpage Page 1 Product Guide Barling s Woodworks are exited to offer a new product line of ready to install, Post and Rail Fencing. Direct to you from us the manufacturer, to
Manholes Table of Contents
Standard MH 300 Title Manholes Requirements MH 300.1 Manholes Requirements Manholes Table of Contents Underground Structures Standards MH 310 MH 318 MH 320 MH 325 MH 330 MH 335 MH 340 MH 350 Precast Tub-Type