City of Vaughan Engineering Department DESIGN STANDARD DRAWINGS

Transcription

1 City of Vaughan Engineering Department DESIGN STANDARD DRAWINGS March 2004

2 STANDARD DRAWINGS Partners With The Environment March 2004

3 FORWARD The March 2004 version of the City of Vaughan Design Standard Drawings represents a major revision to the Standard Drawings and a change of approach to the creation and maintenance of Standard Drawings. With this version, the Engineering and Public Works Departments have replaced several existing standards with the equivalent standard from the Ontario Provincial Standard Drawings (O.P.S.D.). The City of Vaughan acknowledges the use of the O.P.S.D., which are being used more extensively across the province to standardize roads, sewers and watermain infrastructure details, thereby reducing confusion and cost incurred by Contractors and Developers in the various municipalities. We note that the City s Design Standard Drawings are unique to the City of Vaughan and therefore supercede the equivalent O.P.S.D. in all respects unless approval is received in writing from the Commissioner of Engineering and Public Works. 03/25/2004 STANDARD DRAWINGS - Page 1

4 GENERAL The Design Standard Drawings presented are meant to be read in conjunction with the City of Vaughan Design Criteria Document. Changes and revisions will be made to the Design Standard Drawings and Design Criteria from time to time. It is the responsibility of the Developer or Consulting Engineer to obtain and make use of the latest versions available at the time of design. The Developer and / or Consulting Engineer are responsible to ensure that all construction work is carried out in full compliance with the current editions of the Occupational Health and Safety Act and regulations. If no standard drawing is provided by the City of Vaughan Engineering or Public Works Departments in this document, the Ontario Provincial Standard Drawings (O.P.S.D.) are to be consulted. In the event that the O.P.S.D. do not have the required standard the Developer and / or Consulting Engineer are responsible to provide the Engineering and Public Works Departments with the proposed standard in hard copy form, and must receive from the Commissioner of Engineering and Public Works written approval to use the proposed standard prior to the submission of any design drawings. 03/25/2004 STANDARD DRAWINGS - Page 2

5 GENERAL PROVISIONS General provisions are items that may apply in a general case to several design standards. They are understood to be included as part of all City Standard Drawings and are to be used in addition to the O.P.S.D drawings as set out in the O.P.S.D Index. 1. Appropriate cathodic protection (zinc anodes), is required on all buried metal, including mechanical restraints. 2. Appropriate and approved mechanical restraints shall be used in pressure pipe design. 3. Saddles required for all domestic water connections between 20mm and 50mm in diameter. 4. All sewer maintenance hole benching is to be to the obvert of the pipe. 5. All sanitary sewer pipes shall be coloured green. 6. Watermain bedding and cover material shall be mortar sand in accordance with OPSS Sewer bedding and cover shall be as follows: Flexible pipe bedding and cover material shall be granular A or equivalent as approved by the Commissioner of Engineering and Public works. Rigid pipe bedding material shall be granular A or equivalent and cover material shall be mortar sand or equivalent as approved by the Commissioner of Engineering and Public works. 03/25/2004 STANDARD DRAWINGS - Page 3

6 ONTARIO PROVINCIAL STANDARD DRAWINGS (O.P.S.D.) INDEX The following table lists City of Vaughan Design Standard Drawings from the December 1999 Edition that have been replaced by an O.P.S.D standard. Applicable general provisions are noted and are to be used in conjunction with the O.P.S.D. TITLE PREVIOUS STANDARD NUMBER O.P.S.D. REPLACEMENT APPLICABLE GENERAL PROVISIONS Curb and Gutter F Domestic Water Connection I or ,2,3 Watermain Bedding J or or or or or or or or or or or or Storm Headwall K Ditch Inlet (1200x600) K Ditch Inlet (600x600) K or or Sewer Bedding Types L and OPSS Sewer service Connections L or ,5 Maximum Pipe Sizes for Pre-Cast Manholes M Manhole Drop Structure M Ladder Rungs and Dragging Loop Aluminum Safety Gratings M M Traffic Illumination and Signalization O1 O24 Various 03/25/2004 STANDARD DRAWINGS - Page 4

7 DELETED STANDARD DRAWINGS Due to the lack of use and / or obsolete technology, a number of City of Vaughan Standard Drawings from the December 1999 Edition have been removed from this version. The following table lists those standard drawings. PREVIOUS TITLE STANDARD NUMBER Pre-cast Concrete Slab for Bus Stop Shelter E-4 Barrier Curb for Industrial Parking Lot F-4 Watermain Valve Anchors H-5 Industrial Storm Connection Orifice tube Detail for Industrial Lots at Service Manhole Horizontal Thrust Blocks J-2 Vertical Thrust Blocks J-3 Rear Yard Catch Basin Grate K-6 Inlet Catch Basin Cage K-8 Utility Supports Up To 300mm Diameter and Larger I-5 L-3 Supporting Existing Services 300mm Diameter and Larger L-4 Dual Manhole M-4 03/25/2004 STANDARD DRAWINGS - Page 5

8 SUPERCEDED ROAD CROSS SECTIONS The following standard road cross sections previously included in the December 1999 Edition have been superceded and replaced by the current OPA 600 cross sections noted below. The superceded cross sections may be used in specific areas within the City where similar cross sections were previously constructed, for in-fill and build-out purposes, mainly in Blocks 53, 39, 32, 33 East, 17 and 10. Explicit approval by the Commissioner of Engineering and Public Works must be granted prior to their use. The current OPA 600 cross sections will be used for all remaining undeveloped OPA 600 residential Blocks including Blocks 11, 12, 18, 33 West, 40 and 47. SUPERCEDED CURRENT OPA 600 STANDARD NO. NO. STANDARD Single Loaded Residential Road 15m R.O.W. (Superceded March 2004) B-8 B-13 Buffer Road 15m R.O.W. With 7m Pavement Single Loaded Residential Road 15m R.O.W. (Superceded July 1999) B-8A Local Residential Road 17.5 R.O.W. (Superceded March 2004) B-9 B-12 Local Road 17.5m R.O.W. With 8m Pavement Local Residential Road 17.5 R.O.W. (Superceded July 1999) B-9A Primary Residential Road 20m R.O.W. (Superceded March 2004) B-10 B-11 Major Local Road 20m R.O.W. With 9m Pavement Primary Residential Road Without Transit 20m R.O.W. (Superceded July 1999) B-10A Primary Residential Road With Greenway 23m R.O.W. (Superceded March 2004) B-11 B-9 Minor Collector Road With 3m Greenway 26m R.O.W. With 11.5m Pavement Primary Residential Road With Transit 23m R.O.W. (Superceded July 1999) B-11A Primary Residential Road 23m R.O.W. (Superceded March 2004) B-12 B-10 Minor Collector Road 23m R.O.W. With 11.5m Pavement The above noted superceded standard road cross section drawings have been included as Appendix `A for reference purposes. 03/25/2004 STANDARD DRAWINGS - Page 6

9 STANDARD DRAWING INDEX DRAWING No. DESCRIPTION GENERAL A-1... BASE MAP A-2... LEGEND OF SYMBOLS A-3... ABBREVIATIONS A-4... GEODETIC CONTROL SURVEY MONUMENT - TYPE A A-5... GEODETIC CONTROL SURVEY MONUMENT - TYPE B A-6... GEODETIC CONTROL SURVEY MONUMENT - ENGRAVING / STAMPING HISTORICAL PRE OPA 400 ROAD CROSS-SECTIONS B LANE ARTERIAL ROAD - 35m R.O.W. B LANE ARTERIAL ROAD - 30m R.O.W. B-3... MAJOR COLLECTOR ROAD - 26m R.O.W. B-4... INDUSTRIAL ROAD - 23m R.O.W. B-5... MINOR COLLECTOR ROAD - 23m R.O.W. B-6... LOCAL ROAD - 20m R.O.W. B-7... LOCAL ROAD CUL-DE-SAC m R.O.W. CURRENT OPA 600 ROAD CROSS-SECTIONS B-8... MAJOR COLLECTOR ROAD 26m R.O.W. - 14m PAVEMENT B-9... MINOR COLLECTOR ROAD WITH 3m GREENWAY 26m R.O.W m PAVEMENT B MINOR COLLECTOR ROAD 23m R.O.W m PAVEMENT B MAJOR LOCAL ROAD 20m R.O.W. - 9m PAVEMENT B LOCAL ROAD 17.5m R.O.W. - 8m PAVEMENT B BUFFER ROAD 15m R.O.W. - 7m PAVEMENT B LANEWAY 8m R.O.W. - 6m PAVEMENT B LAY-BY LANE MINOR COLLECTOR ROAD - 23m R.O.W. 03/25/2004 STANDARD DRAWINGS - Page 7

10 ROAD GEOMETRIC DETAILS C-1... INDUSTRIAL CUL-DE-SAC - 23m R.O.W. C-2... RESIDENTIAL CUL-DE-SAC m R.O.W. C-3... RESIDENTIAL CUL-DE-SAC m R.O.W. C-4... ANGLE BEND C-5... HORIZONTAL CURVE INTERSECTION DETAILS D-1... BASIC INTERSECTIONS D-2... TAPERED INTERSECTIONS D-3... INTERMEDIATE `T INTERSECTIONS (COLLECTORS) D-4... INTERMEDIATE `T INTERSECTIONS (ARTERIALS) D-5... INTERMEDIATE `X INTERSECTIONS D-6... MAJOR `T INTERSECTIONS D-7... MAJOR `X INTERSECTIONS SIDEWALKS AND WALKWAYS E-1... SIDEWALK AND RAMP E-2... WALKWAYS E-3... REMOVEABLE BOLLARD E-4... BOLLARD DETAIL E-5... PATHWAY ILLUMINATION WARNING SIGN CURB AND GUTTER F-1... CATCH BASIN CURB DETAIL F-2... CURB AND SUBDRAIN DETAIL TRAFFIC CONTROL G-1... STREET SIGNS G-2... DEAD END BARRICADE G-3... CONSTRUCTION TRAFFIC BARRICADES G-4... PROJECT SIGN 03/25/2004 STANDARD DRAWINGS - Page 8

11 WATERMAIN VALVES H-1... SINGLE VALVE IN CHAMBER & DRAIN VALVE H-2... MULTIPLE VALVE CHAMBER (MAX. 300mm GATE VALVE) H-3... AIR RELEASE VALVE CHAMBER (MAX 400mm ) H-4... HYDRANT AND VALVE IN BOX SERVICE CONNECTIONS I-1... RESIDENTIAL SERVICE CONNECTIONS I-2... INDUSTRIAL SERVICE CONNECTION I-3... INDUSTRIAL WATER CONNECTION I-4... STORM CONNECTIONS I-5... METER AND BYPASS IN CHAMBER I-6... METER CHAMBER FOR COPPER SERVICES I-7... WATER METER CHAMBER COVER I-8... INDUSTRIAL/COMMERCIAL METER AND BYPASS VALVE INSTALLATION (METER ROOM) I-9... WATERMAIN TEST BY-PASS & CHLORINATION I BACKFLOW PREVENTER & CHAMBER I GATE VALVE IN CHAMBER WITH BY-PASS I METER IN CHAMBER (BLVD IRRIGATION SYSTEM) TRAFFIC CALMING J-1... TRAFFIC CALMING ADVANCE WARNING SIGNS J-2... SPEED HUMP J-3... RAISED CROSSWALK J-4... RAISED INTERSECTION J-5... ROUNDABOUT LAYOUT J-6... SINGLE-LANE ROUNDABOUT J-7... MINI-ROUNDABOUT J-8... TRAFFIC CALMING MEDIANS J-9... CURB EXTENSIONS & ROAD NARROWINGS J CHICANE STORM SEWER APPURTENANCES K-1... OUTFALL GRATE MAX. 900mm K-2... INLET GRATE K-3... REAR YARD CATCHBASIN GRATE 03/25/2004 STANDARD DRAWINGS - Page 9

12 K-4... CATCHBASINS K-5... PRECAST CATCHBASIN WITHOUT SUMP K-6... STORM WATER FACILITY POND WARNING SIGN K-7... SAFETY STATION FOR PONDS & WATERWAYS STREETLIGHTING L-1... INSTALLATION OF STREETLIGHT CABLE AT ROAD CROSSINGS L-2... STANDARD TRENCH FOR DIRECT BURIED CABLES L-3... STANDARD STREETLIGHTING TRENCH L-4... STREETLIGHT WIRING CONNECTIONS L m (30 ) SQUARE STREET LIGHT POLE L m (30 ) TAPERED OCTAGON STREETLIGHT POLE L m TO 13.0m CONCRETE POLE WITH UNDERGROUND CIRCUITS AND STREETLIGHT MOUNTED ON ARM L m (27 ) DECORATIVE STREETLIGHT POLE L m (19-7 ) DECORATIVE STREETLIGHT POLE L INSTALLATION OF BOLLARD WALKWAY LIGHT SERVICE AT STREETLIGHT POLE L m VICTORIAN SCROLL ARM L m VICTORIAN SCROLL ARM MAINTENANCE HOLES M-1... PRECAST MAINTENANCE HOLE (1200mm to 2400mm ) FENCES N-1... CHAIN LINK SECURITY FENCE N-2... ACOUSTIC WOOD FENCE N-3... PRIVACY WOOD FENCE N-4... FENCE MASONARY PILLAR N-5... ACOUSTIC / PRIVACY FENCE NOTES N-6... PEDESTRIAN / BICYCLE HAND RAIL 03/25/2004 STANDARD DRAWINGS - Page 10

13 APPENDIX `A SUPERCEDED ROAD CROSS-SECTIONS B-8... SINGLE LOADED RESIDENTIAL ROAD 15m R.O.W. (SUPERCEDED MARCH 2004) B-8A... SINGLE LOADED RESIDENTIAL ROAD 15m R.O.W. (SUPERCEDED JULY 1999) B-9... LOCAL RESIDENTIAL ROAD 17.5m R.O.W. (SUPERCEDED MARCH 2004) B-9A... LOCAL RESIDENTIAL ROAD 17.5m R.O.W. (SUPERCEDED JULY 1999) B PRIMARY RESIDENTIAL ROAD 20m R.O.W. (SUPERCEDED MARCH 2004) B-10A... PRIMARY RESIDENTIAL ROAD WITHOUT TRANSIT 20m R.O.W. (SUPERCEDED JULY 1999) B PRIMARY RESIDENTIAL ROAD WITH GREENWAY 23m R.O.W. (SUPERCEDED MARCH 2004) B-11A... PRIMARY RESIDENTIAL ROAD WITH TRANSIT 23m R.O.W. (SUPERCEDED JULY 1999) B PRIMARY RESIDENTIAL ROAD 23m R.O.W. (SUPERCEDED MARCH 2004) 03/25/2004 STANDARD DRAWINGS - Page 11

14 REVISIONS No. Date Drawing(s) Comments 1 July 2004 C-3 Cul-de-sac & Curb radius increased by 0.25m 2 July 2004 C-4 Street Line radius = 16m, not curb radius 3 July 2004 E-1 Driveway thickness revised to 175mm 4 Sept J-4 Revised X-Section A-A : Height of raised Intersection to be 100mm 5 June 2006 H-1 Use of Butterfly Valve 6 June 2006 I-8 Back Flow Valve Added 7 Aug I-9 New Standard created 8 Feb I-7 Cover size adjusted 9 Feb I-8 Notes Revised 10 Feb I-10 New Standard created 11 Jul I-11 New Standard created 12 Apr I-12 New Standard created 13 Sept E-5 New Standard Pathway Illumination Warning Sign 14 Sept E-1 Directional Lines added in Sidewalk Ramps 15 Sept K-7 New Standard Safety Station for Ponds & Waterways 16 Aug G-4 New City Logo added 17 Nov I-1 Extended sewer connection lines 18 July 2011 K-7 Revised Safety Station location note 19 A-4 Revised Title & Letter Guidelines Removed 20 A-5 Letter Guidelines Removed & Rod Length Adjusted 21 A-6 Title Revised from Monument to Tablet 22 A-7 New Standard created 23 March 2012 K-6 By-Law Number Revised 24 Aug I-1 Increase water connection pipe size and revised notes 25 Mar G-4 New Department Name Added 03/25/2004 STANDARD DRAWINGS - Page 12

15

16

17

18

19

20

21

22

23

24

25

26

27

28

29

30