BID TABULATION SHEET
|
|
|
- Spencer Goodwin
- 5 years ago
- Views:
Transcription
1 Title: Guide Rail & Guide Rail Parts Opening Date: Thursday, January 5, 2:00 pm Contract #: CC Total Bids Received: Signed Proposal Stock Disclose BID TABULATION SHEET Non- Collusion Affirm Action NJ BRC IRAN CD Excep. Coop Chemung Supply Corp Route 14 Miracle Mile Elmira, NY x x x 5225 x x x N Y
2 Guide Rail and Guide Rail Parts Open - Ended Contract #CC Spreadsheet VENDOR NAME>> Chemung Supply ITEM DESCRIPTION UNIT COST spacing hole spacing anchor plate spacing 10 radius hole spacing 10 radius anchor plate 10 radius spacing 10 radius hole spacing 10 radius anchor plate 10 radius spacing 15 radius hole spacing 15 radius
3 anchor plate 15 radius spacing 15 radius hole spacing 15 radius anchor plate 15 radius spacing 20 radius hole spacing 20 radius anchor plate 20 radius spacing 20 radius hole spacing 20 radius anchor plate 20 radius post hole spacing 1/2 post hole spacing
4 holes for anchor plate post hole spacing 10 radius 1/2 post hole spacing 10 radius holes for anchor plate 10 radius post hole spacing 10 radius 1/2 post hole spacing 10 radius holes for anchor plate 10 radius post hole spacing 15 radius 1/2 post hole spacing 15 radius holes for anchor plate 15 radius
5 post hole spacing 15 radius 1/2 post hole spacing 15 radius holes for anchor plate 15 radius post hole spacing 20 radius 1/2 post hole spacing 20 radius holes for anchor plate 20 radius post hole spacing 20 radius 1/2 post hole spacing 20 radius holes for anchor plate 20 radius 12.5 long with 6 3 post hole spacing 40 Radius ()
6 long- with post hole spacing 40 Radius ( ) 12.5 long with 6 3 post hole spacing with additional holes for anchor plate 40 Radius () 12.5 long with 6 3 post hole spacing 40 Radius () 12.5 long- with post hole spacing 40 Radius ( ) 12.5 long with 6 3 post hole spacing with additional holes for anchor plate 40 Radius () Weathering steel Guide Rail Element 12.5 long with 6 3 post hole spacing 40 Radius () Weathering steel Guide Rail Element 12.5 long- with post hole spacing 40 Radius () Weathering steel Guide Rail Element 12.5 long with 6 3 post hole spacing with additional holes for anchor plate 40 Radius () Weathering steel Guide Rail Element 12.5 long with 6 3 post hole spacing 40 Radius () Weathering steel Guide Rail Element 12.5 long- with post hole spacing 40 Radius ()
7 54 Weathering steel Guide Rail Element 12.5 long with 6 3 post hole spacing with additional holes for anchor plate 40 Radius () 55 Brake Master 350 Energy Absorption System 56 X-Lite Tangent Lindsay Transportation Solution 57 Fleat 350 Road Systems Inc. 58 SKT-SP Road Systems Inc. 59 Fleat SP-Road System Inc. 60 Fleat MT Road Systems Inc CAT-350 Trinity Highway Products 3, Galvanized BCT Buffer with welded diaphragm Weathering Steel BCT Buffer with welded diaphragm Galvanized End Section Rounded with a 6-5/16 Radius Weathering Steel End Section Rounded with a 6-5/16 Radius Galvanized Terminal Connector Parapet Weathering Steel Terminal Connector Parapet Galvanized Terminal Connector for Buffer End Weathering Steel Terminal Connector for Buffer End Galvanized Post W6 x Long with ¾ diameter hole drilled 1-1/8 off center and 7 down from the top Galvanized Post W6 x Long with ¾ diameter hole drilled 1-1/8 off center and 7 down from the top
8 Weathering Steel Post W6 x Long and galvanized 42 from the bottom up with ¾ diameter hole drilled 1-1/8 off center and 7 down from the top Weathering Steel Post W6 x Long and galvanized 60 from the bottom up with ¾ diameter hole drilled 1-1/8 off center and 7 down from the top Treated Wood Post 6 x 8 x 5 3 long drilled for cable and 5/8 post bolt Treated Wood Block 6 x 8 x 14 long drilled for 5/8 post bolt Notched Treated Wood Block 6 x 8 x 14 long drilled for 5/8 post bolt Notched Composite Block 6 x 8 x 14 long drilled for 5/8 post bolt Galvanized back-up plate 12 x 12 drilled for threaded cable Galvanized Anchor plate for BCT end treatment Standard Galvanized Pipe 2 x 6 long Galvanized ¾ BCT cable assembly with 1 diameter threaded rod on both ends Splice Bolt 5/8 x 1-1/4 Galvanized Full Thread Per 100 pieces Splice Bolt 5/8 x 2 Galvanized Full Thread Per 100 pieces Splice Bolt 5/8 x 3 Galvanized Full Thread Per 100 pieces
9 Splice Bolt 5/8 x 6 Galvanized Full Thread Per 100 pieces Splice Bolt 5/8 x 9-1/2 Galvanized 6 Thread Per 100 pieces Splice Bolt 5/8 x 18 Galvanized 6 Thread Per 100 pieces Splice Bolt 5/8 x 25 Galvanized 6 Thread Per 100 pieces Washer 11/16 inside diameter and 1-3/4 outside diameter Galvanized Per 100 pieces Washer 1-1/16 inside diameter and 3 outside diameter Galvanized Per 100 pieces Nut 5/8 Galvanized Recessed Per 100 pieces Nut 1 Galvanized Recessed Per 100 pieces Treated Wood Post 6 x 8 x 6 long CRT Post drilled for 5/8 post bolt Treated Wood Post 6 x 8 x 6 long CRT Line Post drilled for 5/8 post bolt Treated Wood Post 5-1/2 x 7-1/2 x 3 6-3/4 long Short Post drilled for 5/8 post bolt IBM Guardrail Reflector, fits top of steel I-Beam Post Butterfly Guardrail Reflector, fits inside all W-Beam steel guardrail The Flex 2020, fastens to composite block and concrete barriers (F3000), Impact Head, Fleat (F1303), W-Beam Guardrail End Section, 12 Ga., 12-6
10 101 (F1304), W-Beam Guardrail, Center Section (4-2 spacing) 12 Ga., (G1203), W-Beam Guardrail, (6-3 spacing) 12 Ga., (S730), * Foundation Soil Tubes, 6 x 8 x (E750), Bearing Plate 8 x 8 x 5/8 105 (S760), Cable Anchor Bracket 106 (E780), Ground Strut 107 ((P650), 5-1/2 x 7-1/2 x 45 Wood Posts 108 5/8 Flat Washers, (2 each at Soil Tubes + 6 Posts) 109 (W100), 1 Anchor Cable Washers 110 (E350), 3/8 X 3 Lag Screws 111 (W050A), 1-1/16 OD x 9/16 ID A325 Structural Washers 112 (S3000), Impact Head 113 (30G), W-Beam Guardrail, 12 Ga., (39G), W-Beam guardrail, 12 Ga., Splice Bolt 5/8 x 21/2 Galvanized Full Thread Per 100 pieces Splice Bolt 5/8 x 4 Galvanized Full Thread Per 100 pieces W6x20 post 36 tall center mount on 12 x12 x1 plate w/ 1 mounting holes, Galvanized W6x20 post 36 tall center mount on 12 x12 x1 plate w/ 1 mounting holes, Weathered 119 W6x20 post 36 tall offset mount Galvanized as per attached sketch W6x20 post 36 tall offset mount Weathered as per attached sketch SRT post System 1,500.00
11 122 (907G) (Terminal) Rolled Buffer Striped reflector (yellow/black) 16 x 16 adhesive Complete Fleet SP Terminal end 2 post system 125 Complete SKT SP Terminal end 2 post system 126 S3000 Impact Head 127 F3000 Impact Head 128 SF1303 W-Beam guardrail end section TPHP1A First post top 130 TPHP1B First post Bottom 131 HP2A Second post assembly Top 132 HP3B Second post assembly bottom 133 B580904A 5/8 Diameter x 9 Hex bolt GRD B340854A ¾ Diameter x 8 ½ Hex bolt GRD A N030 ¾ Diameter Hex Nut 136 B A 5/16 x 1 Hex Bolt GRD W0516 5/16 Washer 138 N0516 5/16 Hex Nut 139 W to Thrie Beam Transition section Galvanized Thrie Terminal connector Galvanized W6 x 9 Post Galvanized Galvanized Type-B 9-Post Thie- Beam Guide Rail Attachment Complete with W-Thrie Transition Section as Detailed in the NJDOT 2007 Standard Construction Details CD Any questions (items ) please contact- Chris Markley, Mercer : PN DESCRIPTION
12 143 3G 12/12"/BACKUP (GUARD RAIL) G 12/12'6/S SRT-1 (GUARD RAIL) G 12/25' S SRT-2 (GUARD RAIL) A CABLE ANCHOR BRACKET G 12/BUFFER/ROLLED (TERMINAL) GLOVE END G 3/4 X 6'6 CABLE G 5/8" WASHER G 5/8" HEX NUT G 5/8 X 1-1/4" SPLICE SOLT G 5/8 X 1-1/2" HEX HD BOLT G 5/8 X 2" POST BOLT G 5/8" X 18" POST BOLT G 3/4" WASHER G 3/4" HEX NUT G 3/4" X 3" HEX HD BOLT (A325) G 1" WASHER G 1" HEX NUT '0 POST 6 X " BLOCK 6X G 3/8" WASHER G 3/8" LOCKWASHER G 3/8" X 1-1/2" HEX HD BOLT (GR 5) G 3/4" LOCKWASHER G 3/8 X 2" HEX HD BOLT (GR 5) G 3/8" HEX NUT G SLOT GUARD G 3/8 X 3 X 4 PLATE \WASHER A HBA POST 1 TOP (W6 X 8.5) A HBA POST 2 TOP (W6 X 8.5) 58.00
13 A2 HBA POST 1 & 2 BOT (TS 6 X 4) G2 ANGLE STRUT 2 X 2 X 3/
3616 Old Howard Co. Airport Road Big Spring, TX
3616 Old Howard Co. Airport Road Big Spring, TX 79720 432.263.3725 Table of Contents SKT 350... 1 Bill of Materials... 2 SKT Parts. 7 Downstream Anchor Terminal...... 15 Bill of Materials..... 16 DAT Parts....
3616 Old Howard Co. Airport Road Big Spring, TX
3616 Old Howard Co. Airport Road Big Spring, TX 79720 432.263.3725 SKT-350 SKT-350 31 Bill of Material Type I SKT MGS Type II SKT MGS S3000 1 SKT Impact Head S3000 1 SKT Impact Head Steel Post Systems
Midwest Roadside Safety Facility
28 Spaces @ 75"=2100" 100' 3:1 Cut 40' 75" (TYP.) 3:1 Soil Cut 3:1 1 2 3 4 5 6 7 8 9 10 25 12 13 11 14 15 16 17 18 19 20 21 22 23 24 25 26 75" 300" or Two 12'-6" Section End Section 300" or Two 12'-6"
Midwest Roadside Safety Facility
28 Spaces @ 75"=175'-0" 6'-3" (TYP.) 8'-0" Soil Cut 1 2 3 4 5 6 7 8 9 10 12 13 11 14 15 16 17 18 19 20 21 22 23 24 25 25 C.I.P. 26 6'-3" 25'-0" or Two Section End Section 25'-0" or Two Section End Section
Midwest Roadside Safety Facility
28 Spaces @ 75"=175'-0" 100'-0" 3:1 Cut 40'-0" 6'-3" (TYP.) 3:1 Soil Cut 3:1 1 2 3 4 5 6 7 8 9 10 25 12 13 11 14 15 16 17 18 19 20 21 22 23 24 25 26 6'-3" 25'-0" or Two Section 12-gauge End Section 25'-0"
Midwest Roadside Safety Facility
2 Spaces @ 75" [05]= 150" 3810 4 Spaces @ 3 Spaces @ 4 Spaces @ 18.75" 37.5" [953]= 37.5" [953]= [476] 112 1/2" 150" = 75" 2857 3810 [05] 18 476 7 Spaces @ 75" [05]=525" [13335] 21 20 18 17 1615 14 1312
Installation Instructions
Installation Instructions SRT-350 8 POST Guardrail End Treatment Revised July 2005 TRINITY HIGHWAY SAFETY PRODUCTS, INC. BUILDING TOMORROW S HIGHWAY SAFETY SOLUTIONS TODAY 2 SRT TM 8-POST SYSTEM FOR SPECIFIC
CAT-350 Product Manual
CAT-350 Product Manual Release 01/17 www.ingalcivil.co.nz CAT-350 NZ Assembly Manual Ingal Civil Products NZ 40 Tironui Road, Auckland 2112 www.ingalcivil.co.nz Important: These instructions are for standard
SKT-SP Tangent Terminal
Assembly Instructions for metric SKT-SP Tangent Terminal & FLEAT-SP Flared Terminal SP Standard Post System Guardrail Terminals ROAD SYSTEMS, INC. P. O. Box 2163 Big Spring, Texas 79721 Phone: (432) 263-2435
RAIL PANEL AT TRANSITION SECTION PLAN - POST DETAIL PLAN - TUBE SPLICE. Colorado Department of Transportation. Staff Bridge Branch
Limits of pay length for Bridge RailType 10M (For post spacing, see Dwg. No. B ) B60610 (Use with B60610A) 8 min. 1 max. 8 min. 1 max. 10 0 Max. 10 0 Max. post spacing 10 0 Max. 2 5 Post 1 x 1 slotted
Guardrail End Treatment. Instructional Manual
SRT -27 AND SRT -31 Guardrail End Treatment Instructional Manual IMPORTANT: These instructions are to be used only in conjunction with the installation of the SRT -27 and SRT -31 systems. These instructions
Assembly Instructions for. for 31" MGS (Midwest Guardrail System) ROAD SYSTEMS, INC.
MSKT Assembly Instructions for MASH Tangent Terminal for 31" MGS (Midwest Guardrail System) ROAD SYSTEMS, INC. P. O. Box 2163 Big Spring, Texas 79721 Phone: (432) 263-2435 FAX: (432) 267-4039 Technical
E:\Wilmot\DGN\14018pp.dgn 3/11/2015 6:49:16 AM
600-06 SHOULDER WIDENING FOR TYPE (SPECIAL) GUARDRAIL TERMINALS E:\Wilmot\DGN\08pp.dgn //05 6:9:6 AM E:\DGN\08SUP.dgn //05 ::55 PM E:\DGN\08SUP.dgn //05 :8:0 PM E:\DGN\08-WRG.dgn //05 :8:5 PM E:\DGN\08SM.dgn
B " 787
175'0" 53339 3H:1V S.B.P. 25" 635 3H:1V Slope 100'0" 30480 Soil Cut 3H:1V Slope 58" 1474 75" 05 1 2 3 4 5 6 7 8 9 10 11 12 13 25 14 15 16 17 18 20 21 22 23 24 25 2270P Impact 243 60 12 Spaces @ 75" [05]
AUXILIARY FRAMING AND ACCESSORIES
CUSTOM CABINETS & RACKS STRUT AND ACCESSO- RIES JUNCTION KITS ANGLE AND BRACE KITS SPLICE KITS BRACE KITS INSTALLATION KITS WALL ANGLE KITS RUBBER END CAPS SUPPORT INSTALLATION AND SUPPORT KITS STANCHION
Midwest Roadside Safety Facility
C 1690" A 42926 75" 1905 150" 3810 G E F F 11 10 9 8 7 6 5 4 3 2 C D D 25 18 17 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 21.2 G E Impact 2270P 17 Spaces @ 75" [1905] Spacing = 106' 3" [32385] 1 1662 1/2"
Midwest Roadside Safety Facility
B 64" 1626 602'-8 1/16" 183695 548'-0" 167030 1 2 3 4 5 6 7 8 9 10 11 12 14 15 16 17 18 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 373839 40 25 IMPACT 1500A 48" 12 27'-5" 8355 [] 3x7 CL A Galvanized
5/16" Flange nut. Bolt Keeper Plate (8" Sq. SYS.) (3) 1/2" x 3" Hex head connector zinc plated bolt w/ washers and nut. Anchor 3" sq. 7 Ga.
2 1/2" x 2 1/2" x 10 Ga. 6" 5" 4" Variable Slipbase (8" Sq. SYS.) 5/16 Corner Bolt W/ nut 5/16" Flange nut Stub Insert (8" Sq. SYS.) Bolt Keeper Plate (8" Sq. SYS.) (3) 1/2" x 3" Hex head connector zinc
Cable Tray Kit: - Cable Tray - Cable Tray Cover - Power Block Support (x2) Top Support Kit: (x2) - 2 Top Supports. Quantities are per bench
Parts Included (per back to back bench) Column Kit: (x2) - 1 LH & 1 RH Column - Control Box - Hand Switch Cable Tray Kit: - Cable Tray - Cable Tray Cover - Power Block Support (x2) Depth Support Kit: -
INSTALLATION INSTRUCTIONS
STRIP DOORS AIR DOORS INSTALLATION INSTRUCTIONS BULK PVC FILM STRIP SHEET PANEL SCREENS, CURTAINS and ENCLOSURES MEGA-PRO SWINGING DOORS DOCK ACCESSORIES IMPORTANT Carefully examine the carton(s) for damage.
Installation of Balustrade Systems
Installation of Balustrade Systems IMPORTANT: Be sure to mark the center point of each newel post's location prior to installation to insure proper spacing. All product interfaces must use PL Premium Adhesive
Roof-Top Applications
Roof-Top Non-Penetrating Flat Roof Mounts Pre galvanized mast, base and Rubber Mat Designed for DSS support 103489 103490 103491 103492 103493 FRM Non-Penetrating Roof Mount (1.25" O.D. Tubing, 60" Overall
Introduction 3. System Overview 3. Before Installation 3. Limitations and Warnings 4. Safety Statements 4. Parts Identification 5.
June 2015 Table of Contents Introduction 3 System Overview 3 Before Installation 3 Limitations and Warnings 4 Safety Statements 4 Parts Identification 5 Preparation 7 Soil Conditions 7 Tools Required 7
CASS TL-3 (Utilizing C-Shaped Post) Assembly Manual
CASS TL-3 (Utilizing C-Shaped Post) Assembly Manual Part No. 620289B Revision March 2007 INDEX Page Important Notice 3 Introduction 3 General Description 3 Ground Preparation and Barrier Alignment 3 Layout
Fixings & Fastenings. Bright Zinc Plated, Galvanised & Stainless Steel. Lockinex. ea i, ea u i
Fixings & Fastenings Bright Zinc Plated, Galvanised & Stainless Steel Lockinex ea i, ea u i INTRODUCTION The Lockinex Range of Fixings & Fastenings are manufactured in Bright Zinc Plate, Hot dipped galvanised
ALUMINUM PIPE GUIDERAIL 01/01/
NOTES PIPE RAILING & POSTS: Structural Tube, Pipe and Bar shall be in accordance with ASTM B22 or ASTM B429, Alloy 606-T6. End Rail 90 bends and corner bends with maximum 4-0" post spacing, may be Alloy
STEEL PIPE GUIDERAIL 01/01/
NOTES PIPE RAILING & POSTS: Pipe Rails and s shall be in accordance with ASTM A5 Grade B for standard weight pipe and ASTM A500 Grade B, C or D or ASTM A50 for structural tube. Bars for handrail supports
INSTALLATION INSTRUCTIONS
TEL -866-XANATOS INSTALLATION INSTRUCTIONS PART#: 7D5000SS\7D500A GRILL GUARD FOR DODGE SPRINTER 07-09 PARTS LIST: 8 6 Grille Guard Driver/Left Frame Mounting Passenger/Right Frame Mounting Driver/Left
VPN: ISBXLR. Copyright Black Box Corporation. All rights reserved Park Drive Lawrence, PA Fax
VPN: ISBXLR Copyright 2003. Black Box Corporation. All rights reserved. 1000 Park Drive Lawrence, PA 15055-1018 724-746-5500 Fax 724-746-0746 JULY 2003 RM649-R2 RM657 RM664 RM861 RM650 RM658-R2 RM665-R2
CHICKEN COOP & CHICKEN RUN. Tools required for assembly (not included)
CHICKEN COOP & CHICKEN RUN ASSEMBLY MANUAL SKU# 6839 Tools required for assembly (not included) Distributed by: TRACTOR SUPPLY COMPANY 0 VIRGINIA WAY, BRENTWOOD, TN 3707 For customer support, call: -888-376-960
HD installation guide
JANUS INTERNATIONAL 1 866 562 2580 www.janusintl.c o m 1950 1950HD installation guide RIGHT DRIVE END SHOWN LH OPPOSITE LEFT TENSION END SHOWN RH OPPOSITE PUSH-UP OPERATION 1950 1950HD SHOWN A rolling
X-Tension TM Guardrail End Terminal
Installation and Maintenance Manual X-Tension TM Guardrail End Terminal Step by Step Instructions for the Tangent, Flared and Median Applications Barrier Systems Sales and Service 3333 Vaca Valley Pkwy,
Index Pipe Hangers and Straps
Index Pipe Hangers and Straps Fig. 1 Standard Clevis Hanger MSS-SP-69, Type 1 WW-H-171E, Type 1 Page 14 Fig. 1CI Clevis Hanger for A.W.W.A. Page 16 Fig. 81 Clevis Hanger WW-H-171E, Type 12 Page 70 Fig.
PERFORM WITH PRECISION MAGNETIC PRODUCTS FOR PRECASTING CONCRETE CONSTRUCTION SOLUTIONS BROCHURE
MAGNETIC PRODUCTS FOR PRECASTING PERFORM WITH PRECISION CONCRETE CONSTRUCTION SOLUTIONS BROCHURE Form Magnets ON/OFF MAGNETS Strong adhesion and shear capacity -650# to 2500# adhesion Easy to turn on or
SIG-032-B TRAFFIC SIGNAL MAST ARM POLE AND MAST ARM DETAILS - CATEGORY III LUMINAIRE ARM (SEE CONTRACT) 6'-0", 8'-0", 10'-0" NOMINAL SPREAD
Michigan Department of Transportation 6'-0", 8'-0", 10'-0" NOMINAL SPREAD (SEE CONTRACT) LUMINAIRE ARM (SEE CONTRACT) POLE CAP 1'-6" (6'-0" ARM) 1'-10" (8'-0" ARM) 2'-0" (10'-0" ARM) NOMINAL RISE 2.38"
SIG-030-B TRAFFIC SIGNAL MAST ARM POLE AND MAST ARM DETAILS - CATEGORY I LUMINAIRE ARM 6'-0", 8'-0", 10'-0" NOMINAL SPREAD (SEE CONTRACT) POLE CAP
Michigan Department of Transportation 6'-0", 8'-0", 10'-0" NOMINAL SPREAD (SEE CONTRACT) LUMINAIRE ARM (SEE CONTRACT) POLE CAP 1'-6" (6'-0" ARM) 1'-10" (8'-0" ARM) 2'-0" (10'-0" ARM) NOMINAL RISE 2.38"
11 6 Round Building Assembly Instructions
11 6 Round Building Assembly Instructions 11 6 Round Building Hardware List 1. Pro Rib Brite White 36 Wide X 68 Long (Siding Steel) 11 2. Top Wall Wheel Ring 3 3. Base Ring 3 4. 1 ½ X 68 Aluminum Tubes
SIGN MOUNTED BEACON SIG-027-A SINGLE SIGN MOUNTED FLASHING BEACON INSTALLED ON ONE WOOD POST DETAIL "A-1"
1 1/2" x 60" Galvanized (thread both ends) Top Bolt See Detail "A-1" and Slotted Channel Parallel Conduit Clamp Warning Sign 3 Equal Bolt Spacings (3 places at 12" min. spacing) (1) 3/8"x 7" min. (4"x
8mm x 25mm "Z" Bolt Plates. (2) Tube Spacers. (2) 12mm Bolt Plates w/ Nut
PARTS LIST: 1 Grille Guard 10 12mm Lock Washers 1 Driver/Left Side Frame Mounting Bracket 8 12mm Hex Nuts 1 Passenger/Right Side Frame Mounting Bracket 2 10-1.50mm x 25mm Button Head Bolts 1 Driver/Left
Part No. Thread Size B Design Load Approx. Wt./100 A in. (mm) Lbs. (kn) Lbs. (kg)
ttachments Fig. 3199R - eiling Flange Fig. 3199RT - eiling Flange ura-opper oated Size Range: 3 /8"-16 & 1 /2"-13 rod Material: Malleable Iron (Stainless Steel Type 304 available) Standard 3199RT is UR-OPPER
Mounting Accessories. Installation Guide. VIVOTEK SD83XXE Speed Dome
VIVOTEK SD83XXE Speed Dome Mounting Accessories AM-116/117 Pendant Pipe AM-118 Pendant Head AM-221 Gooseneck AM-231 Parapet Mount AM-519 Pendant Adaptor Installation Guide Corresponding part numbers: AM-116:
INSTALLATION INTRUCTIONS
INSTALLATION INTRUCTIONS Page 1 of 9 Installation Instructions 1. 2. Check all items against parts list to ensure all parts have been included (see pages 6,7,8,9). Locate and drill holes for concrete footings.
Midwest Roadside Safety Facility
19'-11 1/2" 6083 239'-11 1/2" 73139 Impact 1100C 25 43 5/16" 1100 upstream from the upstream face of the first shear fender downstream of the joint between barrier nos. 7 and 8 Upstream End Downstream
X-350 Guardrail End Terminal
X-350 Guardrail End Terminal Tangent and Flared Step by Step Instructions for the Tangent and Flared Applications Ph 0800 655 200 or visit www.csppacific.co.nz August 2011 / Page 1 Table of Contents Introduction
GRILLE GUARD SPRINTER VAN (EXCLUDES X4) INCLUDES MERCEDES, FREIGHTLINER AND DODGE PARTS LIST:
PARTS LIST: 1 Grille Guard 8 12mm Hex Nuts 1 Driver/Left Side Frame Mounting Bracket 2 10-1.50mm x 25mm Button Head Bolts 1 Passenger/Right Side Frame Mounting Bracket 4 10mm x 20mm OD x 2mm Flat Washers
BRIDGE RAILING, 4 TUBE B-26-F POST DETAILS MICHIGAN DEPARTMENT OF TRANSPORTATION
\ ƒ" x 1 " SLOTTED HOLE IN POST AND \ ƒ"! HOLE IN RAIL \ "! x 6" SLOTTED ROUND HEAD BOLTS, WITH 1 PLATE WASHER, 1 LOCK WASHER AND HEX. NUT \ ƒ" x 1 " SLOTTED HOLE IN POST AND \ ƒ"! HOLE IN RAIL \ "! x
Barrier Field Manual. CSP Pacific Barrier Field Manual December 12
Barrier Field Manual CSP Pacific Barrier Field Manual December 12 Barrier Field Manual - Index Flexrail W Beam Highway & Bridge Barrier Brochure 04 Installation Checklist 07 FX54 Highway Flexrail 12G Half
P SERIES. and MASON CORPORATION
P SERIES CATAL ALOG Carpor ports and Patio Cover ers Corporate Office 123 Oxmoor Road West Birmingham, AL 35209 P.O. Box 59226 Birmingham, AL 35259-9226 Telephone: 1/800/868-4100 Fax: (205) 945-4304 Mason-Columbia
TYPICAL STANDOFF GLASS RAIL ELEVATION TYPICAL SECTION RS0B20 WITH RECTANGULAR BACK PLATE TYPICAL STAIRS
Revisions By: CRL SRS STANDOFF RAILING SYSTEM CRL GLASS RAIL S RS0B20 w/ RECTANGULAR BACK PLATE CRL'S GLASS RAIL S CAN BE USED FOR MOUNTING GLASS PANELS UP TO 3/4" (19 MM) IN THICKNESS. THE 4" X 8" (102
Factory Assistance: Phone: Fax: Page 1
CABLE RUNWAY ACCESSORIES Radius Drop / Stringer Drop Provides 3 bend radius Radius drop fits 6, 12 and 18 runway made from 1-1/2 x 3/8 tubing Steel construction Includes (3) cable spools, (1) bolt, (1)
Horizontal Cable Systems
ALUMINUM RAILING INSTALLATION INSTRUCTIONS Horizontal Cable Systems 1) Check Contents Of Packages: Verify that all parts have arrived and that they match the packing list. 1A) Coastal applications: Confirm
32 Gallon Perforated Square Receptacle
32 Gallon Perforated Square Receptacle 992-031 24 5/" 24 5/" 39 1/2" 30 1/2" ITEM NO. PART NUMBER DESCRIPTION QTY. 1 653-006 Receptacle Base 1 2 653-045 32 Gallon Perforated Side 4 3 653-011 Arch Lid 1
INSTALLATION INSTRUCTIONS, AND PARTS LIST
INSTALLATION INSTRUCTIONS, AND PARTS LIST LB20 SERIES RAMPS Link Mfg. Ltd. 223 15th St. N.E. Sioux Center, IA USA 51250-2120 (712) 722-4868 Fax (712) 722-4779 QUESTIONS? CALL CUSTOMER SERVICE 1-800-248-3057
DRAWINGS LIST TERMINAL TABLE TENSION GUARDRAIL X-TENSION G END OF CONTENTS
X-TSION G TSION GUARDRAIL D TERMINAL TABLE OF CONTTS DRAWINGS AND CHECK LIST Drawings and Check List 2 Tools 9 Installation 10 Foundations 32 Maintenance 33 REV DATE ISSUE COMMTS 05 17-06-10 Technical
Installation Instructions
Column & Beam Units with Debris Netting Installation Instructions Laminated Wood Systems, Inc. Seward, Nebraska 800-949-3526 2015 LWS, INC. AVR-NET INSTALL 05-12-16 AVR Installation Notes 1 Safety The
HOME WORKSHOP HANDBOOK Rugged BENCH GRINDER. By JOEL B. LONG
6 HOME WORKSHOP HANDBOOK Rugged BENCH GRINDER W By JOEL B. LONG ITH this bench grinder you can keep your cutting tools sharp and do general offhand grinding, and can, with the aid of various attachments,
BARBWIRE, TENSION WIRE, & UTILITY WIRE
MISCELLANEOUS ITEMS ANCHORS 66 BARBWIRE 60 BARBWIRE - GAUCHO 60 BOLTS 62 BUMPER POSTS 63 CEMENT 63 FASTENERS 63 FENCE LATTICE 68 GROUND RODS 63 GUIDERAIL 67 H-CLIPS 61 HOG RINGS 60 NAILS 63 OZ-POSTS 64,65
CNC Router Parts PRO Machine Kit Cable Track Installation Instructions
1 1 X CABLE TRACK TRAYS & BRACKETS The cable track on the side of the system is supported by a metal tray (or multiple trays for longer systems such as a PRO4896). These trays hang from brackets on the
Sturdi-Wall Design Manual for SW46, SW66, SW63, SW64, SW60, SW83, SW84, and SW80 Models
Sturdi-Wall Design Manual for SW46, SW66, SW63, SW64, SW60, SW83, SW84, and SW80 Models Project Number ME086-05 by Brent Leatherman, P.E. Timber Tech Engineering, Inc E-Mail: bl@timbertecheng.com January
1.8 METER SERIES 1194 ANTENNA SYSTEM
January 14, 2002 REVISION G ASSEMBLY MANUAL 1.8 METER SERIES 1194 ANTENNA SYSTEM PRODELIN CORPORATION 1500 Prodelin Drive Newton NC 28658 1.8 METER SERIES 1194 ANTENNA SYSTEM G Revise Address 1/14/02 F
v1.0 ASSEMBLY GUIDE Mia Wide Bookcase
v1.0 ASSEMBLY GUIDE Mia Wide Bookcase Components Upon unpacking your bookcase from it s delivery box, you should have the pieces shown. Follow the steps on the next pages to assemble your new bookcase.
X-TENSION 350 Guardrail End Terminal Tangent and Flared
X-TENSION 350 Guardrail End Terminal Tangent and Flared December 2015 Table of Contents Introduction 3 System Overview 3 Before Installation 3 Limitations and Warnings 4 Safety Statements 4 Parts Identification
B3199R - Ceiling Flange B3199RCT - Ceiling Flange Dura-Copper Coated. TOLCO Fig All Steel Ceiling Plate. 216 Eaton
ttachments 3199R - eiling Flange 3199RT - eiling Flange ura-opper oated Size Range: 3 /8"-16 & 1 /2"-13 rod Material: Malleable Iron (Stainless Steel Type 304 available) Standard 3199RT is UR-OPPER coated
Section D ACCELERATOR
Section D ACCELERATOR 1D Index No. Part No. Description 1. 47-021476-001 Ball Accelerator Box 2. 11-051019-001 Hex Hd. Cap Screw (10 mm x 25 mm) 3. 11-052018-001 Flat Washer (10.5 mm x 21 mm x 2 mm) 4.
D HANDRAIL. Doc No. A-39. Item Description. Hand hold for deck entry or exit equipment. Available in 0.6M, 0.9M, 1.2M, 1.5M and 1.8M heights.
D HANDRAIL 1 D Handrail 1 2 M10 Flat Washer 2 Materials: 3 M10x25mm Torx Bolt 2 Hand hold for deck entry or exit equipment. Available in 0.6M, 0.9M, 1.2M, 1.5M and 1.8M heights. 1. Refer to drawings for
OHIO DEPARTMENT OF TRANSPORTATION CENTRAL OFFICE, 1980 W. BROAD ST., COLUMBUS, OHIO
OHIO DEPARTMENT OF TRANSPORTATION CENTRAL OFFICE, 1980 W. BROAD ST., COLUMBUS, OHIO 43216-0899 July 20, 2012 To: Users of the Standard Bridge Drawings From: Tim Keller, Administrator, Office of Structural
Steel Casework Metal Framing System
MISCELLANEOUS ITEMS Continuous Slot Metal Framing System Installs quickly Completely adjustable Re-usable Eliminates all welding, drilling and use of special tools G23 METAL FRAMING SYSTEM 1. Place the
INSIDE PANEL NOT SHOWN TO DETAIL ANCHORING SYSTEM
SIX INCH ALPHA MODULE INSTALLATION KEWAUNEE SCIENTIFIC CORPORATION SIX INCH ALPHA MODULE ANCHORING SYSTEM After Alpha module has been set in desired location. Adjust the four adjustment bolts until the
TS-20KD-1010 LOW PROFILE CARGO SCALE INSTALLATION GUIDE
TS-20KD-1010 LOW PROFILE CARGO SCALE INSTALLATION GUIDE Triner Scale & Mfg. Co., Inc. 8411 Hacks Cross Rd. Olive Branch, MS 38654 Phone: 800-238-0152 Fax: 662-809-2386 Description The Triner Scale Model
Concealed Thru-Roof Assemblies
Concealed Thru-Roof Assemblies IPC s concealed thru-roof assembly is ideal for new constructions or applications where installation will be concealed. The 240 assembly includes everything necessary for
TREX PERGOLA INSTALLATION INSTRUCTIONS
RECOMMENDED TOOLS/SUPPLIES: Pencil 4' Level Measuring Tape Framing Square/Speed Square 8' High Step Ladder (Two recommended) Hacksaw or Bolt Cutters Socket Wrench with 9/16" Socket and 3/4" Deep Socket
1LG WALL MOUNTS - 1LG
WM WALL MOUNTS - 1LG 1LG The Universal One-Legged Mount (1LG) may be the one and only mount that can be installed on any part of any building. This mount is designed for many types of antennas home, TV,
TREX POST MOUNT DECKING AND CONCRETE
TREX POST MOUNT DECKING AND CONCRETE for Pressure-treated Wood Framing LOCATION AND INSTALLATION OF POST MOUNTS IMPORTANT NOTES:» EACH POST MUST BE ATTACHED AS SHOWN TO ENSURE A CODE COMPLIANT AND SAFE
PolyDock MAY RESULT IN PERSONAL INJURY OR DEATH AND WILL INVALIDATE THE
Floating PolyDock PolyDock Instructions and Safety Tips Floating PRODUCT PolyDock ASSEMBLY INSTRUCTIONS Instructions and Safety Tips - PUT SAFETY FIRST - PUT SAFETY FIRST 1. To avoid the risk of personal
Technologies, Inc. Installation Instructions for Anchors & Components. Rev PAGE 1 / 11
Installation Instructions for Anchors & Components PAGE 1 / 11 GROUND ANCHOR INSTALLATION INSTRUCTIONS NOTE: 1) The tensioning bolt can be inserted in the head from either side. 2) In areas of severe cold
CASS S3 4:1. Product Description Assembly Manual
CASS S3 4:1 Product Description Assembly Manual Part No. 620005B CASS S3 4:1 Product Description Assem bly Manual 2525 Stemmons Freeway Dallas, Texas 75207 Important: These instructions are too be used
Transmission Line Support Systems
Antenna Support Bracket for transmission line The Antenna Support Bracket angle mounts directly to a 4-1/2" (114 mm) OD antenna pipe mount or tower leg. This is ideal for supporting transmission line runs
WALL TO FABRICATED FLOOR
WALL TO FABRICATED FLOOR PERIMETER WALL IS HELD IN PLACE BY WOODEN STRIP SCREED OPTIONAL NSF COVED FLOOR IS SHOWN PARTITION WALL IS HELD IN PLACE BY WOODEN STRIP SCREED OPTIONAL NSF COVED FLOOR IS SHOWN
Hex Head Bolt Set N - Includes lock nut. Used to connect male and female T connectors. Galvanized. 3/4" x 3-1/2". Standard Grade (f) Part #24279
a Standard Grade (3/16 ) and Commercial Grade(1/4 ) Tie Down Is designed for use with 1-1/2" thick lumber (minimum width 6"). All hardware is mounted with 3/8" carriage bolts. All male and female dock
Offering a full range of anchoring and tie down systems including:
Offering a full range of anchoring and tie down systems including: BE SURE TO CONSULT LOCAL REGULATORS FOR CODE QUESTIONS AND THE MANUFACTURERS INSTALLATION MANUAL FOR PROPER MATERIALS. Anchors Pan Systems
RIDGE MAST MOUNT (RMM)
May 5, 009 Revision E ASSEMBLY MANUAL (RMM) General Dynamics Satcom Technologies 1500 PRODELIN DRIVE NEWTON NC 8658 88-464-4141 www.gdsatcom.com 1.0 INTRODUCTION: 1.1 Features: The Ridge Mast Mount (RMM)
TENANT IMPROVEMENT 16 FEBRUARY WEST 27TH STREET, 4TH FLOOR 100% CD OWNER/BID ADD 1-03/08/2018
SECTION 055000 - PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification Sections, apply
FNW can handle all your hanger and fastener needs, all in one place. FNW products are sold exclusively at Ferguson.
FASTENERS PIPE HANGERS, SUPPORTS & STRUT ACCESSORIES FNW can handle all your hanger and fastener needs, all in one place. FNW products are sold exclusively at Ferguson. Quick Reference Nuts Heavy Hex Nuts...4
24" max from each end of the ledger. See detail 6A & 6B, typ. both ends IRC R Ledger R507.2
NOTE: All exposed lumber to be pressure treated (P.T.) or decay resistant. Fasteners for P.T. wood shall be hot-dipped galv. or stainless steel, typical. see pages 2 & 5 for footings 8'-0" -10'-0" Beam
FIRST TEAM SPORTS, INC.
FIRST TEAM SPORTS, INC. INVADER EZ-CRANK PORTABLE BASKETBALL GOAL ASSEMBLY INSTRUCTIONS Revised - 08/04/10 BILL OF MATERIALS (1) BASE TANK (1) BACKBOARD MOUNT (2) 5/16 X ¾ HEX BOLT (1) LOWER POST (2) SPRING
7141 & NATIONAL POLE VAULT STANDARDS SPECIFICATIONS
SPECIFICATIONS Specifications: This standard has a clamping system and a handle added for ease of operation. The clamping system is above the base pad protectors when in the lowest position and the tightening
INSTALLATION GUIDE. 5" Balustrade System
5" Balustrade System PARTS LIST ITEM QTY A PORCH POST INSTALLATION KIT (PPK6) (SEE STEP 3C) 5 1/2" x 5 1/2" Trim Collar 2 2" Wide x 1 1/2" x 2" Angle Bracket 4 MATERIALS NEEDED INSTALLATION GUIDE #14 x
HP-2 / HP-4 Wall Wash Recessed Spackle & Visible Flange Installation Instructions Overview
Overview NOTES All power connections should be installed according to local/national codes by a Certified Electrician. This installation requires proper support as each luminaire is being installed. DO
New Product Release: October 2014 Boone Racks
New Product Release: October 2014 Boone Racks Double Fido Fountain Mounting: Surface NOTE: THESE ROUGH-IN DIMENSIONS MAY VARY ½: (13 mm) PLUS OR MINUS NOTE: All dimensions subject to manufacturing variance
3. Use base plate as template (see FIG. 4-1) to mark location for fasteners.
Plan the layout of the railing it is the beginning of a successful project. Getting Started... 1. Completely read the application instructions before starting the installation of the railing. 2. Properly
SERIES M Ku-BAND Rx / Tx ANTENNA SYSTEM
4096-432 June 15, 2011 REVISION D ASSEMBLY MANUAL SERIES 1125 1.2M Ku-BAND Rx / Tx ANTENNA SYSTEM General Dynamics 1500 PRODELIN DRIVE NEWTON, NC 28658 PRODELIN CORPORATION 4096-432 SERIES 1125 1.2M Ku-BAND
1.8 METER SERIES 1184 ANTENNA SYSTEM
REVISION F January 10, 2002 ASSEMBLY MANUAL 1.8 METER SERIES 1184 ANTENNA SYSTEM PRODELIN CORPORATION 1500 Prodelin Drive Newton NC 28658 1.8 METER SERIES 1184 ANTENNA SYSTEM F Revised Address 1/10/02
UNIVERSAL DOUBLE BAR SAFETY GATE
N. Unit 5 Stour Valley Business Centre, Brundon Lane, Sudbury CO0 7GB Tel: 0787 377 322 - Fax: 0787 377 433 UNIVERSAL DOUBLE BAR SAFETY GATE Reversible Hinge Design EASY INSTALLATION Universal hinge design
FURNITURE LABORATORY METAL FRAMING SYSTEM. For additional information and help in planning contact Mott Manufacturing.
LABORATORY Continuous Slot Metal Framing System For additional information and help in planning contact Mott Manufacturing. G22 Connection Instructions Installs quickly Completely adjustable Re-usable
Laser Safety Curtains Page 1 of 5
Laser Safety Curtains Page 1 of 5 Overview For any laser curtain intallation and or hardware questions please do not hesitate to contact Laservision USA at 1-800-393-5565 or chat with our Certified Laser
Oxford Stalls Installation Instructions
Oxford Stalls Installation Instructions RAMM Horse Fencing and Stalls 13150 Airport Hwy. Swanton, OH 43558-9615 1-800-434-8456 Rev. 8/15/17 Before You Start Typical stall sizes are 10 x 10, 12 x 12 or
ALUMINUM RAILING INSTALLATION INSTRUCTIONS. 1) Check Contents Of Packages: Verify that all parts have arrived and that they match the packing list.
ALUMINUM RAILING INSTALLATION INSTRUCTIONS AF#2010-308A Glass Infill Systems 1) Check Contents Of Packages: Verify that all parts have arrived and that they match the packing list. 2) Gather and Identify
Dura-Lock Roof System
DLR-14 Dura-Lock Roof System Assembly and Installation Instructions Read the instructions before starting the job. They explain the steps required to produce a finished product that will meet factory specifications.
ULTRA SPACE SAVER Installation Instructions
Installation Instructions The Ultra Space Saver has several steps for installation. Note that the single and double sided setups and parts are different. Make sure you follow the instructions according
SECTION R507 DECKS DECKING LEDGER BOARD BEAM. FOOTING BEAM SPAN CANTILEVER For SI: 1 inch = 25.4 mm FIGURE R507.2 DECK CONSTRUCTION
SECTION R507 DECKS R507.1 Application. The provisions of this section shall provide prescriptive requirements for the design and construction of all uncovered, wood-framed, single-span exterior decks.