Engineering Excellence. Diam nd. FLANGES & FITTINGS P r i v a t e L i m i t e d
|
|
- Marjorie Zoe Peters
- 5 years ago
- Views:
Transcription
1 Engineering Excellence Diam nd FLANGES & FITTINGS P r i v a t e L i m i t e d
2 COMPANY PROFILE Company Profile Diamond Flanges is a dream venture conceived by Mr. S.K. Bhimsaria back in What was a minor machining shop back then, today stands out with high standard manufacturing units producing a wide variety of Steel Flanges & Fittings, each living up to selfimposed standards of excellence. Backed with decades of experience, the obvious maturity is thoroughly visible in its every product. This extra edge leverages us to always stay a step ahead of competition enabling us to guarantee total customer satisfaction. Our shop strategy planners, self -motivated & forceful management and a strong team of expert technicians have worked together to make Diamond Flange into an internationally acclaimed Flanges manufacturing set-up. Our headquarters in Kolkata, offers unrivaled access to rapid delivery of products and services with comprehensive production at our workshop in Howrah, West Bengal. Scintillating success in domestic market has motivated us to plunge into the international market as well. Value Added Service l Galvanizing l Electro Plating l Rubber Lining l Epoxy Coating
3 OUR PRODUCTS SLIPON BLIND WELD NECK SOCKET WELD ORIFICE LAP JOINT LONG WELD NECK SPECTACLE BLIND THREADED PLATE Flange Plate Flange : 1/2" to 240" NB Standard : ANSI B 16.5, AWWA, BS 10, BS 3293, IS 6392, DIN, EN 1092, BS 4504, JIS, ISS & as per Customer Drawing/Specification Plate Flange : 1/2" to 240" NB Standard : ANSI B 16.5, ANSI B 16.47, AWWA, BS 10, BS 3293, IS 6392, DIN, EN 1092, BS 4504, JIS, API 6A, ISS & as per Customer Drawing/Specification Standard : ANSI B 16.5, ANSI B 16.47, ANSI B 16.36, AWWA, BS 10, BS 3293, IS 6392, DIN, EN 1092, BS 4504, JIS, API 6A, ISS & as per Customer Drawing/Specification Forged Flange : 1/2" to 3" NB Standard : ANSI B 16.5 & as per Customer Drawing/ Specification Plate Flange : 1/2" to 240" NB Standard : ANSI B & as per Customer Drawing/ Specification Plate Flange : 1/2" to 240" NB Standard : ANSI B 16.5, AWWA, BS 10, BS 3293, IS 6392, DIN, EN 1092, BS 4504, JIS, ISS & as per Customer Drawing/Specification Standard : As per Customer Drawing/Specification Material : Carbon Steel, Stainless Steel, Low Temprature carbon Steel, Plate Flange : 1/2" to 40" NB Standard : ANSI B & as per Customer Drawing/Specification Material : Carbon Steel, Stainless Steel, Low Temprature carbon Steel, Flange : 1/2" to 24" NB Forged Flange : 1/2" to 24" NB Standard : ANSI B 16.5, BS 10, EN 1092, BS 4504, DIN & as per Customer Drawing/Specification Material : Carbon Steel, Stainless Steel, Low Temprature carbon Steel,
4 OUR PRODUCTS BEND ELBOW TEE REDUCER CAP NIPPLE STUBEND Buttweld Fittings Range : 1/2" to 24" NB IN SCH: 20, 40, STD, 60, 80, XS, 100,120,140,160,XXS Type : 3D, 5D & Customized in Seamless / Welded /Fabricated Elbow Range : 1/2" to 48" NB IN SCH: 20,40,STD, 60,80,XS,100,120,140,160,XXS Type : 90 Deg., 45 Deg., 180 Deg. & Customized in SEAMLESS/ ERW / WELDED/ FABRICATED Range : 1/2" to 48" NB IN SCH: 20, 40, STD, 60, 80, XS, 100, 120,140,160,XXS Type : Equal, Un-Equal & Reducing in SEAMLESS/ ERW / WELDED/ FABRICATED carbon Steel, Range : 1/2" to 48" NB IN SCH: 20,40,STD, 60,80,XS,100,120,140,160,XXS Type : Concentric & Eccentric in SEAMLESS/ ERW / WELDED/ FABRICATED carbon Steel, Range : 1/2" to 48" NB IN SCH: 20,40,STD, 60,80,XS,100,120,140,160,XXS Type: End & Dish End in SEAMLESS / WELDED/ FABRICATED carbon Steel, Range : 1/2" to 48" NB IN SCH: 20, 40, STD, 60, 80, XS, 100, 120, 140, 160, XXS Type: Barrel Nipple, Pipe Nipple & Swage Nipple in SEAMLESS /WELDED/ FABRICATED Range : 1/2" to 48" NB IN SCH: 20, 40, STD, 60, 80, XS, 100, 120, 140, 160, XXS Type: Long & Short Stubend in SEAMLESS / WELDED / FABRICATED Material : Carbon Steel, Stainless Steel, Low Temperature carbon Steel,
5 OUR PRODUCTS FORGED ELBOW FORGED TEE FORGED COUPLING FORGED NIPPLE FORGED PLUG FORGED UNION FORGED BUSHING FORGED BOSS Forged Fittings Range : 1/2" to 4" NB IN Class: 3000 LBS, 6000; BS, 9000 LBS Type : 90 Deg., 45 Deg., Socket Weld & Threaded (BSP, NPT, BSPT) carbon Steel, Range : 1/2" to 4" NB IN Class: 3000 LBS, 6000; BS,9000 LBS Type : Equal, Unequal, Reducing & Cross Tee in Socket Weld & Threaded (BSP, NPT, BSPT) carbon Steel, Range : 1/2" to 4" NB IN Class: 3000 LBS, 6000; BS, 9000 LBS Type : Half & Full Coupling in Socket Weld & Threaded (BSP, NPT, BSPT) carbon Steel, Range : 1/2" to 4" NB IN Class: Sch 5, SCH 10, SCH 40, SCH 80 ETC. Type : Plain end/ SCRD- NPT, BSP, BSPT carbon Steel, Range : 1/2" to 4" NB IN Class: 3000 LBS, 6000; BS, 9000 LBS Type : Threaded (BSP, NPT, BSPT) carbon Steel, Range : 1/2" to 4" NB IN Class: 3000 LBS, 6000; BS,9000 LBS carbon Steel, Range : 1/2" to 4" NB IN Class: 3000 LBS, 6000; BS,9000 LBS carbon Steel, Range : 1/2" to 4" NB IN Class: 3000 LBS, 6000; BS,9000 LBS carbon Steel,
6 OUR PRODUCTS WELDOLET ELBOLET NIPOLET SWEEPOLET SOCKOLET THREADOLET LATROLET Branch Outlets Range : 1/2" to 24" NB IN Class: 3000 LBS, 6000 ;BS,9000 LBS & Range : 1/2" to 24" NB IN Class: 3000 LBS, 6000 ;BS,9000 LBS & Range : 1/2" to 24" NB IN Class: 3000 LBS, 6000 ;BS,9000 LBS & Range : 1/2" to 24" NB IN Class: 3000 LBS, 6000; BS, 9000 LBS & Range : 1/2" to 24" NB IN Class: 3000 LBS, 6000; BS, 9000 LBS & Range : 1/2" to 24" NB IN Class: 3000 LBS, 6000; BS, 9000 LBS & Range : 1/2" to 24" NB IN Class: 3000 LBS, 6000; BS, 9000 LBS &
7 MANUFACTURING PROCESS FLANGE Manufacturing Process PIPE FITTING Quality Assurance "Quality isn't something that can be argued into an article or promised into it. It must be put there. If it isn't put there, the finest sales talk in the world won't act as a substitute" - C.G. Gampbell. If our quest ends in excellence then the last step of our endeavor is forever the rigorous process of quality control. 'Quality First' has always been our outlook. Diamond Flanges leaves no stone unturned in its quest to achieve true quality. Exhaustive research and development have enabled us to constantly manufacture outstanding products. It is our stringent quality control, that we owe our consistent roll out of high-grade products. Our sophisticated laboratory is equipped with Spectrometer, Ultrasonic Tester, Hardness Tester, Wet Lab for Chemical / Physical Testing and Radiography Testing Machine. Aided by these cutting edge tools, our hawk eyed professionals strictly monitor each outcome to ensure that our products always mean 'Value for money' to our esteemed clients. Our ISO 9001 : 2008 compliant Quality Management System guarantees full product traceability. This certification is only small token of our earnest commitment to our longstanding tradition of quality consciousness and continuous improvement.
8 COMPANY WORKSHOP DIAMOND FLANGES & FITTING PVT. LTD. 537, Rabindra Sarani, Flat 1B, Kolkata INDIA. Factory : 31A/3, Mahendra Bhattacharjee Road, Howrah , West Bengal, INDIA. Ph / sales@diamondflanges.com / info@diamondflanges.com Website :
Stock Programme Scope of Supply. v
Scope of Supply v2.10 2018 Pipe: Seamless Stainless Steel ASTM A312 ASME B36.19 TP316/316L DN15 DN250 10S 160 Stainless Steel ASTM A312 ASME B36.19 TP304/304L DN15 DN200 10S 160 Low Temp ASTM A333 ASME
More informationMidsteel Flanges & Fittings Ltd
Company Profile Stockist and Manufacturer s of Pipe, Flanges and Fittings for the Oil, Gas, Petrochemical, Fire Protection and Power Generation Industries. Contents Introduction to Location Stock Range
More informationQUALITY ASSURANCE SPECIFICATION
Page 1 of 8 QAS: 2.02 QUALITY ASSURANCE SPECIFICATION REVISION: 0 DATE: 08/29/14 MATERIAL PURCHASING Code Material Purchase Specification for Pipe, Valves, Fitting, and Flanges PAGE 1 OF 8 1.0 Purpose
More informationThis specification describes the minimum requirements for piping systems for the following service:
201/11/2 1/9 1.0 APPLICATION This specification describes the minimum requirements for piping systems for the following service: Underground Service Water Note: This specification does not apply to piping
More informationThis specification describes the minimum requirements for piping systems for the following service:
SPEC-3004 1/7 1.0 APPLICATION This specification describes the minimum requirements for piping systems for the following service: Service Water Design Conditions Operating Conditions 10 PSIG @ 33 o F to
More informationThis specification describes the minimum requirements for service water piping systems (ie: cooling water, process water, etc.), located on surface.
SPEC-3500 1/9 1.0 PURPOSE This specification describes the minimum requirements for service water piping systems (ie: cooling water, process water, etc.), located on surface. Note: This specification does
More informationAN ISO 9001 : 2008 CERTIFIED COMPANY. DAkkS Deutsche Akkreditierungsstelle D-ZM
AN ISO 9001 : 2008 CERTIFIED COMPANY DAkkS Deutsche Akkreditierungsstelle D-ZM-16096-01-01 COMPANY PROFILE: Petrofast ME is the leading manufacturer and suppliers of fasteners ideally located in phase
More informationThis specification describes the minimum requirements for piping systems for the following service:
201/01/13 1/ 1.0 APPLICATION This specification describes the minimum requirements for piping systems for the following service: Service Air Design Conditions Operating Conditions Blast Air (see Note 1)
More informationFabricated Structural Steelwork. Section 8
Fabricated Structural Steelwork Section 8 INDEX DESCRIPTION FIGURE No. PAGE Pipe Shoe Welded Pipe Shoe Welded (Heavy Duty) Pipe Shoe Clamped Pipe Shoe Clamped (Heavy Duty) Inverted Tee Post Upright Tee
More informationA comprehensive pipework prefabrication service PES PIPEWORK ENGINEERING SERVICES LIMITED
A comprehensive pipework prefabrication service PES PIPEWORK ENGINEERING SERVICES LIMITED Whatever your pipework requirements WE CAN DELIVER Established in 1982, Pipework Engineering Services has earned
More informationMetronics Stahl. Simplify Everything
Metronics Stahl Simplify Everything Company Profile Mehta Group is known worldwide as the most competitive group in the world of Stainless Steel having its headquarters in Mumbai India. It was incorporated
More informationPIPING NOMENCLATURE. Header Branch connection Valve Flange Expansion joint Expansion loop Pipe support Reducer Elbow
PIPING COMPONENTS Piping components are mechanical elements suitable for joining or assembly into pressure-tight fluid containing piping systems. Components include pipe, tubing, fittings, flanges, gaskets,
More informationAllentown, PA - Plant Expansion Steel Pipe Spec. No. 671-S40 December 31, 2015
Steel DIVISION 15: MECHANICAL SECTION 15061: STEEL PIPE 1.0 GENERAL All materials shall be of high quality and as per the following specifications. 2.0 PRODUCTS 2.1 Specification CS-1 Service = (CA, VAC)
More informationSECTION EXPANSION FITTINGS AND LOOPS FOR HVAC PIPING
SECTION 230516 - EXPANSION FITTINGS AND LOOPS FOR HVAC PIPING PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and
More informationCABLE SUPPORT MANAGEMENT SYSTEM
CABLE SUPPORT MANAGEMENT SYSTEM Contents Introduction Instruction for Product CTS CABLE TRUNKING SYSTEM Singapore Standards Cable Trunking SS 249 : 1981 Class 1 1 Epoxy Steel Cable Trunking for Indoor
More informationThis specification describes the minimum requirements for piping systems for the following service:
SPEC-3501 1/ 1.0 APPLICATION This specification describes the minimum requirements for piping systems for the following service: Instrument Air Design Conditions 150 PSIG @ 180 F Operating Conditions 125
More informationInternational Tube & Conduit Company Ltd. BRITISH STANDARD STEEL CONDUITS & FITTINGS
International Tube & Conduit Company Ltd. BRITISH STANDARD STEEL CONDUITS & FITTINGS 1 ABOUT THE COMPANY VISION STATEMENT We strive to exceed our customers expectations through leading edge technologies
More informationNote: Do not bury sulphur dioxide lines Use stainless steel pipe and fittings only where specified on project drawings.
1/7 1.0 APPLICATION This specification describes the minimum requirements for piping systems for the following service: Liquid and High Pressure Gaseous Dry Sulphur Dioxide (Less than 100 ppm of water)
More informationSTAINLESS INDUSTRY LIST
The Worlds Largest Supplier of Socket Screws STAINLESS INDUSTRY LIST CAT#SS0806 Melbourne Sydney Brisbane Perth Auckland BRIGHTONBEST International (AU) PTY LTD. W e are proud to be a TEAM company A cornerstone
More informationSOCKET & NIPPLE. Quality products for a quality environment BSP THREADED FITTINGS - PP. Code K12. Socket - equal Injection moulded.
BSP THREADED FITTINGS - PP SOCKET & NIPPLE Code K12 Socket - equal 1/2 to 3 Material: PP black Socket - reduced 1/2 up to 4 in various increments Material: PP black Nipple - equal 1/2 to 4 Material: PP
More information1.0 SCOPE DEFINITIONS CODES AND STANDARDS GENERAL MATERIAL SPECIFICATIONS... 9
TABLE OF CONTENTS 1.0 SCOPE... 6 1.1 DEFINITIONS... 6 1.2 CODES AND STANDARDS... 6 2.0 GENERAL MATERIAL SPECIFICATIONS... 9 2.1 CARBON STEEL PIPING CLASSES 15, 15H, 15U, 30U, 30, 30W, 30H (NOTE1)... 9
More informationCABLE TRAYS & STRUTS CATALOUGE
CABLE TRAYS & STRUTS CATALOUGE We are the Manufacturer for Copper Bonded Ground Rod and Contract Manufacturing Company for other products made from Brass, Copper, Gunmetal, Bronze, Cast Iron, Malleable
More informationA. Compatibility: Products shall be suitable for piping service fluids, materials, working pressures, and temperatures.
SECTION 22 05 16 LOOPS FOR PLUMBING PIPING PART 1 - GENERAL 1.01 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification
More informationFUEL GAS PIPING SECTION A. The provisions of SECTION 15010, MECHANICAL GENERAL REQUIREMENTS, apply to this section.
FUEL GAS PIPING SECTION 15355 PART 1 GENERAL 1.1 DESCRIPTION A. The provisions of SECTION 15010, MECHANICAL GENERAL REQUIREMENTS, apply to this section. B. This specification covers both interior and exterior
More information.1 Materials and installation for steel piping, valves and fittings for hydronic systems in building services piping..2 Related Sections.
Issued 2006/08/01 Section 15183 Hydronic Systems: Steel Page 1 of 6 PART 1 GENERAL 1.1 SUMMARY.1 Section Includes..1 Materials and installation for steel piping, valves and fittings for hydronic systems
More informationSteel Couplings. Product Specifications Welded steel couplings both galvanized and black in diameters from 1/8 up to 4
Merchant Couplings Steel Couplings Merchant Couplings Product Specifications Welded steel couplings both galvanized and black in diameters from 1/8 up to 4 Technical Specifications Standards: Product complies
More informationFASTENERS. Specialist in Hi-Tensile & Mild Steel
FASTENERS Specialist in Hi-Tensile & Mild Steel Fasteners Business Established in 2003, Karamtara's Fasteners business vertical provides truly global services. We provide special industrial fasteners to
More informationWe are one of the leading manufacturers and Suppliers of a wide range of Precision Engineering Products. Due to their dimensional accuracy, easy installation and low maintenance, these products are highly
More informationWanco Electric & Machinery Pte Ltd. Cable Management Systems. Cable Trunking
Wanco Electric & Machinery Pte Ltd Cable Management Systems Cable Trunking About Wanco Wanco Electric and Machinery Pte Ltd is the leader in electrical construction materials. Through continued support
More informationKhathij Industrial Fasteners
Dear Sir/Madam, Khathij Industrial Fasteners This is Saqubar Sadique representing 'KHATHIJ INDUSTRIAL FASTENERS' from Chennai, India. We 'Khathij industrial fasteners' like to introduce us as a Stockist
More informationEngineering Design & Power Training Institute
Engineering Design & Power Training Institute Recognition & Approvals Association of Power & Design Engineers (APDE) An ISO 9001: 2008 Certified Institute Courses P G Diploma in Piping Design & Details
More informationOUR QUALITY POLICY VISION MISSION
AUSTENITE FASTENERS PVT.LTD. A unique name in fasteners line has come long way since its taking over Krishna Engineering Company which was established in 1999. The company has it is manufacturing plant
More informationEssex County College - West Essex Campus Addition And Renovations dlb # / SECTION EXPANSION FITTINGS AND LOOPS FOR HVAC PIPING
SECTION 230516 - EXPANSION FITTINGS AND LOOPS FOR HVAC PIPING PART I - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and
More informationTHERMOWELLS CONSTRUCTION FROM BARSTOCK OR FABRICATED
age 1 of 5 THERMOWELLS CONSTRUCTION FROM BARSTOCK OR FABRICATED A thermowell is a thermally conductive socket recommended to: rotect the delicate instrument sensing elements against corrosive effects.
More informationIntroduction to Piping Material Activities
A description of the current practices within the Materials Section of the By Dr M. A. Meshkot 25 October -30 November 1997 8/11/97 First Draft for Comment 24/11/97 Final Draft for Basic Approval Table
More informationFES SUBSEA HOT STAB. FES Subsea Merchant Court, Ashington, Northumberland, England, NE63 0YH
FES SUBSEA HOT STAB Flexible Engineered Solutions have built up a reputation for satisfying clients with a range of standard & bespoke ROV operable Hot Stab Connectors for use in fluid transfer systems
More informationA representative from Occupational Health is to be involved in the commissioning process to address any Respiratory Protection Program requirements.
SPEC-3017 1/8 1.0 PURPOSE This specification describes the minimum requirements for the installation of breathing air distribution systems (indoor and outdoor) up to the connection to the breathing air
More informationI-VICFLEX.VS1. Victaulic VicFlex Style VS1 Dry Sprinkler WARNING WARNING TECHNICAL DATA BEND CHARACTERISTICS INSTALLATION INSTRUCTIONS SIDEWALL
INSTALLATION INSTRUCTIONS I-VICFLEX.VS1 Victaulic VicFlex Style VS1 Dry Sprinkler SIDEWALL Y Read and understand all instructions before attempting to install any Victaulic VicFlex Style VS1 Dry Sprinklers.
More informationAnupriya Ultratech Plot No. W-98(A), MIDC Ambad, Nashik, Maharashtra
Anupriya Ultratech Plot No. W-98(A), MIDC Ambad, Nashik, Maharashtra info@anupriyaultratech.com rakesh.patil@anupriyaultratech.com Company Name : Anupriya Ultratech Entity : Proprietory Year of Establishment
More informationMission Statement. State Steel strives to provide quality products and services at competitive
Mission Statement State Steel strives to provide quality products and services at competitive prices. This commitment is demonstrated with several branch locations all offering large, diverse inventories
More informationSECTION CABLE TRAYS FOR COMMUNICATIONS SYSTEMS
SECTION 270536 - CABLE TRAYS FOR COMMUNICATIONS SYSTEMS PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division
More informationCHINA ZHEJIANG ZHONGGONG VALVE GROUP CO,.LTD FORMEN VALVE
INTERNATIONAL SALES: FORMEN VALVE ADD: OUBEI TOWN, YONGJIA COUNTY, WENZHOU, ZHEJIANG, CHINA HEADQUARTER: ZHEJIANG ZHONGGONG VALVE GROUP ADD: WUXING INDUSTRY ZONE, OUBEI TOWN, WENZHOU, CHINA ABOUT US Formen
More informationRaising Performance Together In the Oil & Gas Industry
Raising Performance Together In the Oil & Gas Industry Flanges, Bw Fittings, Valves, Pipes, Gaskets, Studbolts, Isolation Joints, Pig Launcher Receivers. C O M P A N Y P R O F I L E HISTORY NECO GOLD GROUP
More informationCARBON STEEL BUTTWELD FITTINGS STD & XH Carbon Steel Buttweld Pipe Fitting List Prices (SBW-0118)
CARBON STEEL BUTTWELD FITTINGS STD & XH Carbon Steel Buttweld Pipe Fitting List Prices (SBW-0118) Manufacturing Facility is ISO9001:2000 Fittings Pressure Tested & Straightness Tested Dimensions Conform
More informationBalaji THE COMPANY MISSION
82, GANGOTRI INDUSTRIAL ESTATE, OPP. PANCHRATNA ESTATE, NR. RAMOL OVER BRIDGE, VATVA-382445.(GUJARAT), INDIA. Website : www.balajifasteners.co.in E-mail : info@balajifasteners.co.in OUR QUALITY POLICY
More informationREPUTE tube fittings are manufactured to stringent quality control program and internal standards which
Introduction: REPUTE tube fittings are manufactured to stringent quality control program and internal standards which assure the highest quality available in the industry. Two ferrule tube fittings are
More informationAB INDUSTRIES FENCING PRODUCTS
AB INDUSTRIES FENCING PRODUCTS WWW.ABINDUSTRIES.COM.AU Did you know that A&B Industries is the manufacturer? We manufacturer and distribute the products directly to you the Wholesaler. There is no middle
More informationA FUTURE ARISES Made of Strong Steel
www.iforge.co.in A FUTURE ARISES Made of Strong Steel If you don't create change, change will create you DISCOVER A JOURNEY OF CHANGE, A JOURNEY KNOWN AS INDUSTRIAL FORGE & ENGINEERING CO. LTD. Poised
More informationKerkau Manufacturing. B16.5 Flange Book
Kerkau Manufacturing B16.5 Flange Book TABLE OF CONTENTS Revision 1 Title Page Table of Contents Tolerance Page Permissible Imperfections Dimensions of Flange Facings (all pressure rating classes) Dimensions
More informationApplication for design registration
Avis au lecteur sur l accessibilité : Ce document est conforme au standard du gouvernement du Québec SGQRI 008-02 afin d être accessible à toute personne handicapée ou non. Toutes les notices entre accolades
More informationSAMAMAT FLOW CONTROL L.L.C.
SAMAMAT FLOW CONTROL L.L.C. SFC-MK-LS-001 Rev.: 03 COMPANY PROFILE Company Location Company Information Company Size Nearest Transportation Company Name SAMAMAT FLOW CONTROL L.L.C Company Address Plot
More informationTechnical Specifications: Supply of Seamless Grade TP304L Pipe and Grade WP304L Pipework Fittings to the ITER Organization (IO).
IDM UID: R22L3M ver 1.4 Technical Specifications: Supply of Seamless Grade TP304L Pipe and Grade WP304L Pipework Fittings to the ITER Organization (IO). Contents 1 Terms and Acronyms... 3 2 Background...
More informationWe Are the Worldwide Provider for All Your Valve and Fitting Needs
Product Catalog We Are the Worldwide Provider for All Your and Fitting Needs C&C strives to earn your business by offering an extensive line of high quality products with a proven track record for successful
More informationProduct Guide Specification
HALFEN USA Inc. March 2012 8521 FM 1976 P.O. Box 547 Converse, TX 78109 Toll Free 800-423-9140 Fax 888-277-1695 Website www.halfenusa.com E-mail info@halfenusa.com Product Guide Specification Specifier
More informationWelcome to Srishaa Machined Fasteners Pvt Ltd. Our Mission. Our Vision. Our Quality Policy
Welcome to Srishaa Machined Fasteners Pvt Ltd. Our Mission We at Srishaa Machined Fasteners, are committed to deliver products that meet and exceed your requirements and expectations Our Vision We aim
More informationVersai Evolution of Versatile Fencing
Versai Evolution of Versatile Fencing About Versai Ornamental Fencing Versai Ornamental Fencing Versai Ornamental Fencing by Fortress is the next generation in ornamental fencing. It offers a solution
More informationMERKAD MAKINA. mould manufacturing - innovations, state-of-the-art, competitveness
MERKAD MAKINA mould manufacturing - innovations, state-of-the-art, competitveness In this article we take a look at how Merkad is continuing to respond to and stay ahead of market demands for special moulds.
More informationCABLE TRUNKING & ACCESSORIES
CABLE TRUNKING & ACCESSORIES STRAIGHT CABLE TRUNKING SELF TAPPING SCREW CONNECTOR H W MATERIAL & FINISHING 1 Galvanised Iron to BS2989 : 1982 & Original Finishing 2 Hot Roll Steel to JISG 3131 SPHC & HDG
More informationManufacturer & Exporter of C.I Casting and Machine Tools
Manufacturer & Exporter of C.I Casting and Machine Tools Floor Plates Surface Plates Angle Plates Welding Plates Modernized state of an art C.I Foundry Capacity of around 400 MT per Month Single pc casting
More informationPage 1 of 12 Second Revision No. 5-NFPA 12-2014 [ Section No. 2.3.4 ] 2.3.4 ASTM Publications. ASTM International, 100 Barr Harbor Drive, P.O. Box C 700, West Conshohocken, PA 19428-2959. ASTM A53, Standard
More informationANSI ORIFICE FLANGES METAL-KOREA
METAL-KOREA ANSI ORIFICE FLANGES ORIFICE FLANGES are widely used in conjunction with orifice meters for measuring the rate of flow of liquids and gases. They are basically the same as standard welding
More informationShell & Tube Heat-Exchangers
Shell & Tube Heat-Exchangers Shell & Tube Heat-Exchangers Shell & Tube Heat Exchangers are widely spread and preferred in all types of production. The reliable design ensures their convenient use as well
More informationwww. otech.com.sg EFS801 ELECTROMAGNETIC FLOWMETER
www. otech.com.sg EFS801 ELECTROMAGNETIC FLOWMETER 1 www. otech.com.sg EFS801 - CFT181/RFT201 ELECTROMAGNETIC FLOWMETER Accurate, Reliable and Stable Flow Measurement. Measuring Principle The measuring
More information000304A A B C D 800 Top E 1000 Pag. 00/05
Measuring tools Dividers Protractors, squares Rules, scribers Screw pitch gauges Feeler gauges Welding seam gauges Drawing tools Dividers with joint Din 686 With square legs, made of forged steel. Hardened
More informationMagnetic level indicators made in Australia under licence to Weka AG of Switzerland.
ABN 24 080 175 293 PO Box 212 Caringbah NSW 1495 Sydney Australia ph: +61 (0)2 9542 8977 fx: +61 (0)2 9542 7978 www.controlcomponents.com.au Magnetic level indicators made in Australia under licence to
More informationhttps://www.indiamart.com/airservicesgroup/
+91-8048109735 Air Services Group https://www.indiamart.com/airservicesgroup/ Our company ventured in dealing and supplying of a range of Auto Drain Valve, Aluminium Piping System and many more. We are
More informationSPECIALISTS
Bending & Rolling SPECIALISTS www.bendtechgroup.com.au Our 200NB x 12mm wall, pipe bender makes us one of the largest, low cost and efficient benders in Australia Over 30 years of market leading bending,
More informationAnnexure - V. Specifications, Typical Drawing & Data Sheet for Split TEE (Hot Tapping Material)
Annexure - V Specifications, Typical Drawing & Data Sheet for Split TEE (Hot Tapping Material) CONTENTS SL NO. DESCRIPTION 1.0 SCOPE 2.0 REFERENCE DOCUMENTS 3.0 MANUFACTURER'S QUALIFICATION 4.0 MATERIALS
More informationWESTBROOK. Westbrook Manufacturing Div. Sales Office Houston, Texas Mailing Address: P O Box Houston, Texas Houston, Texas 77020
Name: Westbrook Manufacturing Div. Corporate & 1111 Lockwood Dr Sales Office Houston, Texas 77020 Mailing Address: P O Box 15614 Houston, Texas 77220 Plant: Web Site 1521 Lathrop Houston, Texas 77020 www.westbrookmfg.com
More informationTRIDENT FASTENERS PLOT NO 3731 DARED PHASE 3 JAMNAGAR GUJRAT INDIA p /17 M : E MAIL:
TRIDENT FASTENERS TRIDENT FASTENERS PLOT NO 3731 DARED PHASE 3 JAMNAGAR GUJRAT INDIA p. 0288 2730516/17 M.9374206480: 7574060310 E MAIL: TFPL@GMAIL.COM Page 1 TRIDENT FASTENERS COMPANY PROFILE TRIDENT
More informationLengths [7] Ø.50 [13] [7] [13]
Dimensions in [ ] are in millimeters Standard (2 1 / 2 6 ) Standard (9 24 ).75 STEM.40 [10] EXTERNAL THREAD.61 [15] 1.00 [25] STEM STEM Ø.44 [11] Threaded-Stepped Shank Standard Stem Length Length (T)
More informationA Higher Level of Performance. Data Sheet. Series Pressure and Level Transmitters. For more information, please visit >
A Higher Level of Performance Data Sheet Series 000 Pressure and Level Transmitters For more information, please visit > www.hawkmeasure.com Series 000 000-SAN Cable with separate electronics Description
More informationcontent Introduction Some good reasons to use SMARTr products Reducers, Plugs Conduit Reducer Stopping Plug
CONTENT 1 2 Introduction Some good reasons to use SMARTr products G.I. CONDUITS SMARTr BS4568 : PT1 : 1970 Class 4, IEC 61386-21 : 2004 IEC60614-2 - 1 : 1993, BS EN 50086-2 -1 : 1996 SMARTr BS4568 : PT1
More informationQuotation Swastik Rs Advance Rs
Quotation 77 Plain Plug Gauges H7 and Other Std With certificate Swastik / Advance / Baker make Size - mm 3 9 10 19 20 29 30 39 40 49 50 59 60 69 70 79 80 89 Advance Rs. 410 480 610 820 970 1160 1750 2200
More informationQUALITY THROUGH EXPERIENCE-SINCE 1963
b y H a k o h a v V a l v e s P E N S T O C K S & F L A P V A L V E S by Hakohav Valves ABOUT US QUALITY RELIABILITY Kim Valves started up as Hakohav Valves in 1963 by two young visionary engineers who
More informationFORGED BRASS & STEEL FITTINGS "NPT" and "NPT 45 SAE"
FORGED BRASS & STEEL FITTINGS "NPT" and "NPT 45 SAE" BRASS FLARED TUBE FITTINGS "STANDARD FLARE SAE 45 " FITTING CONNECTIONS RANGE Standard MALE FLARE SAE 45 Standard FEMALE FLARE SAE 45 Standard MPT (male
More informationSECTION METAL FABRICATIONS
SECTION 05100 PART 1 - GENERAL 1.01 DESCRIPTION A. Section includes specifications for metal fabrications, including minimum requirements for fabricator, and galvanizing. 1.02 REFERENCE STANDARDS A. ASTM
More informationSatish Lele M:
Satish Lele satish.lele@gmail.com M:91-98202 77283 This is a program for Skill Development and Bridging the Gap between Manual and Computer work. I offer Training of Basic Fundamentals and How to Use my
More informationBritish Standard Pipe Tapered
British Standard Pipe Tapered Information / Identification BSPT connections, just as NPT connections, seal by thread interference. BSPT connections are the same as JIS Tapered Pipe, Whitworth Tapered Pipe
More informationMEGGITT MOBREY LTD. MOBREY SQUING Vibrating fork liquid level switch. Product data sheet IP202
MEGGITT MOBREY LTD MOBREY SQUING Vibrating fork liquid level switch Universal level switch High level alarm duty Overfilling prevention Intrinsically safe models Marine approved models FEATURES Small &
More informationGeneral Information. Ball Curb Valve
General Information 1. All Jones Curb Valves are manufactured in accordance with the AWWA Standard C-800-latest revision. 1. Copper Alloy CDA No. C83600 (85-5-5-5) 2. Copper Alloy CDA No. 89520 (Low Lead)
More informationSIGMA Ingenieurgesellschaft mbh
Software & Engineering PROBAD PROBAD Overview PROBAD is a solution for the code-based strength calculations of pressure parts. It allows re-checking, designing or optimizing of vessel- and pipe components
More informationStabalux T. 5.0 Stabalux T 1
5.0 1 5.1 - System 2 5.1.1 System properties 2 5.1.2 System profiles 6 5.2 - Processing information 9 5.2.1 Mullion-transom joint 9 5.3 - Design 11 5.3.1 System cross sections 11 5.3.2 Notes 13 System
More informationAppendix E Part Details for the PT20 with Standard Bypass Valve
Appendix E Part Details for the PT0 with Standard Bypass Valve 8 ( ft lb) Part Number Locknut Wrench ( ft lb) 0 8 0 Note: The PT0 is shown below. All parts for the PT0 are the same except for the rotor
More informationGRACO AIRPRO AIR SPRAY GUN
GRACO AIRPRO AIR SPRAY GUN PART NUMBERS AND SCHEMATICS GUIDE Company Profile Since 1944, Marco has developed a strong tradition of providing innovative and reliable products and services to the surface
More informationDurapipe ABS Jointing Guide
Durapipe ABS Jointing Guide Solvent cement welding offers a simple and quick means of constructing high integrity, leak-free joints. The solvent cement operates by chemically softening the joint surfaces.
More informationSTANDARD SPECIFICATION FOR FABRICATION & ERECTION OF PIPING
Doc. No: 254625-300-SP-PIP-007 Rev: B Page 1 of 15 STANDARD SPECIFICATION FOR FABRICATION & ERECTION OF PIPING Mott MacDonald Consultants (India) Pvt. Ltd. Kothari House, CTS No. 185 Off Andheri - Kurla
More informationDETAILED ENGINEERING OF PROCESS PIPING SYSTEMS
LAST UPDATED 25-10-2017 DETAILED ENGINEERING OF PROCESS PIPING SYSTEMS COURSE DURATION: 5 DAYS REACH US Today for Greater Safety, Quality, Reliability, Productivity, Profitability HRD Approved Class A
More informationMEDIUM DUTY CAST IRON SLIDE GATES SERIES 20-10C
MEDIUM DUTY CAST IRON SLIDE GATES SERIES 20-10C Revised October 2007 Armtec reserves the right to alter designs. General The Armtec Sluice Gate is a quality and highly economical gate for a variety of
More informationIt s not how it s made. It s how it s made to last.
It s not how it s made. It s how it s made to last. Fort Wayne Anodizing The most advanced fully-automated industrial hard coat anodizing line. Our commitment to a superior product that s made to last
More informationEchotel Model 910 Ultrasonic Level Switch
Echotel Model 910 Ultrasonic Level Switch D E S C R I P T I O N Echotel Model 910 Level Switches utilize ultrasonic contact technology for measuring level in clean liquid applications. The dual conduit
More informationM-5 PRO CORE BORE PARTS LIST DRILLING MACHINE. (March 2017) Part #
M- PRO CORE BORE DRILLING MACHINE PARTS LIST (March 07) Part #809 Table of Contents Description Page No. Carriage Assembly....... - Combo Base Assembly....... - 7 Anchor Base Assembly........8 Anchor
More information2D Laser Cutting. Rotary Laser Cutting. Folding and Bending. Fabrication. Mig & Tig Welding. Complete Project Management
2D Laser Cutting Rotary Laser Cutting Folding and Bending Fabrication Mig & Tig Welding Complete Project Management Laser Marking & Rotary Laser Marking Delivery Service About Us New Touch Industries is
More informationPiper GI Conduits. Heavy Gauge Welded GI Conduit, threaded
Piper GI Conduits Piper GI Conduits from Eurotube is a range of Conduits manufactured from high grade galvanized steel. The products are available in class 4 hot dipped galvanized, black enameled and class
More informationSCREW THREADS. = minor diameter. d 3. d 2. = pitch diameter
ISO : 6 Part 2 DIN : Part /20 Metric (ISO) screw thread, coarse series -M- T-00 T-002 for M to incl. M,4, fit H/6h The bold lines indicate the maximum material profiles. The maximum material profile of
More informationRosava Engineering Pvt. Ltd.
Rosava Engineering Pvt. Ltd. (An ISO 9001:2008 Certified Company) About US Welcome To ROSAVA ENGINEERING COMPANY Rosava Group was founded in 1965 in India. The tradition and progress here has always produced
More informationFord Couplings For Pipe And Tubing
Section J 6/2002 Ford Couplings For Pipe And Tubing The Ford Meter Box Co., Inc. 775 Manchester Avenue, P.O. Box 443, Wabash, Indiana, USA 46992-0443 Telephone: 260/563-3171 FAX: 1-800-826-3487 Overseas
More informationUL / FM E-1 FIRE PROTECTION PRODUCTS INDICATOR POST FEATURES. *Applies to "ORDER LENGTH" codes B through F; code A has 22" adjustment.
UL / FM MUELLER Indicator Post are used in fire protection systems and perform several functions. The Indicator Post provides a means to operate a buried or otherwise inaccessible valve. Also, the Indicator
More informationFIRE PROTECTION PRODUCTS
FEATURES Rev. 7-11 Mueller Indicator Post are used in fire protection systems and perform several functions. The Indicator Post provides a means to operate a buried or otherwise inaccessible valve. Also,
More informationSAI ROOF SAI ROLL SAI ROLL FORMS INDIA PVT. LTD.
FORMS INDIA PVT. LTD. INTRODUCTION We at " FORMS INDIA PVT LTD." are committed towards quality products to our valuable customers in domestic as well as International market. Our Vision is to be a globally
More information