British Standard Pipe Tapered
|
|
- Luke Barrett
- 5 years ago
- Views:
Transcription
1 British Standard Pipe Tapered Information / Identification BSPT connections, just as NPT connections, seal by thread interference. BSPT connections are the same as JIS Tapered Pipe, Whitworth Tapered Pipe (inch threads), and ISO Tapered Pipe Thread. For hydraulic applications, they are most commonly found on Japanese Equipment, therefore usually being JIS Tapered Pipe Thread. Most of our Male BSPT connections are offered with a 30 chamfered seat, giving them the ability to seal against a BSPP 30 Cone Female Swivel, as well as by thread interference in a female tapered port (figure below). Measurement Procedure 1. With calipers, measure the O.D. (outer diameter) of the male threads or the I.D. (inner diameter) of the Female threads. 2. Check the thread pitch with the thread pitch gauges. 3. Compare measurements against chart. Dash Size Nominal Size Thread Pitch Male Thread O.D. (Inches) Female Thread I.D. (Inches) 2 1/ / /32 4 1/ / /16 6 3/ / /32 8 1/ / /4 12 3/ / /16 BSPT Male BSPT Female or Port / / ¼ / / ½ / / / /32 Contents in page series T BSPT to BSPT Converted to... NPT.. Converted to... JIC Converted to... ORFS... T2 T3 T4 T6 For other Connectors including BSPT threads see the following sections: BSPP - British Section pages B11 - B12 BSPP Gauge Connection - British Section page B23 DIN 12 Seat - DIN Section pages D13 - D14 JIS 30 Flare (BSPP Threads) - Japanese Section page S3 KOMATSU - Japanese Section page K4 Metric ORFS - Chinese Section page E2
2 BSPT PLUG BSPT Nipple BSPT Male 90 Elbow Part Number BSPT 0PT-02 1/8-28 0PT-04 1/4-19 0PT-06 3/8-19 0PT-08 1/2-14 0PT-10 5/8-14 0PT-12 3/4-14 0PT PT-20 1¼-11 0PT-24 1½-11 0PT BSPT PLUG Allen type Countersunk (Hollow Head) Part Number BSPT 0PHT-02 1/8-28 0PHT-04 1/4-19 0PHT-06 3/8-19 0PHT-08 1/2-14 0PHT-12 3/4-14 0PHT PHT-20 1¼-11 0PHT-24 1½-11 0PHT TT /8-28 1/ TT /4-19 1/ TT /4-19 1/ TT /8-19 1/ TT /8-19 1/ TT /8-19 3/ TT /2-14 1/ TT /2-14 1/ TT /2-14 3/ TT /2-14 1/ TT /8-14 1/ TT /8-14 3/ TT /8-14 1/ TT /8-14 5/ TT /4-14 1/ TT /4-14 3/ TT /4-14 1/ TT /4-14 3/ TT / TT / TT / TT / TT TT ¼-11 3/ TT ¼ TT ¼-11 1¼-11 10TT ½ TT ½-11 1¼-11 10TT ½-11 1½-11 10TT ¼-11 10TT ½-11 10TT TT ½ TT ½-11 2½-11 10TT TT /8-28 1/ TT /4-19 1/ TT /4-19 1/ TT /8-19 1/ TT /8-19 1/ TT /8-19 3/ TT /2-14 1/ TT /2-14 1/ TT /2-14 3/ TT /2-14 1/ TT /4-14 1/ TT /4-14 3/ TT / TT TT ¼ TT ¼-11 1¼-11 19TT ½-11 1½-11 19TT BSPT Male Tee BSPT ATTT /8-28 1/8-28 1/8-28 ATTT /4-19 1/4-19 1/4-19 ATTT /8-19 3/8-19 3/8-19 ATTT /2-14 1/2-14 1/2-14 ATTT /4-14 3/4-14 3/4-14 ATTT ATTT ¼-11 1¼-11 1¼-11 ATTT ½-11 1½-11 1½-11 ATTT
3 BSPT Male to BSPT Female BSPT Male to BSPT Female 90 (Street) Elbow NPT Male to BSPT Male 50TT /8-28 1/ TT /4-19 1/ TT /4-19 1/ TT /4-19 3/ TT /8-19 1/ TT /8-19 1/ TT /8-19 3/ TT /8-19 1/ TT /2-14 1/ TT /2-14 1/ TT /2-14 3/ TT /2-14 1/ TT /2-14 3/ TT /4-14 1/ TT /4-14 3/ TT /4-14 1/ TT /4-14 3/ TT / TT / TT / TT / TT / TT TT ¼-11 50TT ¼-11 3/ TT ¼ TT ¼-11 1¼-11 50TT ¼-11 1½-11 50TT ½ TT ½-11 1¼-11 50TT ½-11 1½-11 50TT ½ TT ¼-11 50TT ½-11 59TT /8-28 1/ TT /4-19 1/ TT /8-19 3/ TT /2-14 1/ TT /4-14 3/ TT TT ¼-11 1¼-11 59TT ½-11 1½-11 Female BSPT Coupling 70TT /8-28 1/ TT /4-19 1/ TT /4-19 1/ TT /8-19 1/ TT /8-19 3/ TT /2-14 3/ TT /2-14 1/ TT /4-14 3/ TT TT ¼ TT ¼-11 1¼-11 70TT ½-11 1½-11 70TT Part Number NPT BSPT 10NT /8-27 1/ NT /8-27 1/ NT /4-18 1/ NT /4-18 1/ NT /4-18 3/ NT /8-18 1/ NT /8-18 3/ NT /8-18 1/ NT /2-14 3/ NT /2-14 1/ NT /2-14 3/ NT /4-14 1/ NT /4-14 3/ NT / NT ½ 3/ NT ½ NT ½ 1¼-11 10NT ¼-11½ NT ¼-11½ 1¼-11 10NT ¼-11½ 1½-11 10NT ½-11½ 1½-11 10NT ½-11½ NT ½ 2-11
4 BSPT Male to NPT Female Solid NPT Male to BSPT Female Solid 10JT series continued from last column Part Number BSPT NPT 50TN /8-28 1/ TN /4-19 1/ TN /4-19 1/ TN /8-19 1/ TN /8-19 1/ TN /8-19 3/ TN /2-14 1/ TN /2-14 3/ TN /2-14 1/ TN /4-14 3/ TN /4-14 1/ TN /4-14 3/ TN / TN / TN / TN / TN ½ 50TN ¼-11 1/ TN ¼-11 3/ TN ¼ ½ 50TN ¼-11 1¼-11½ 50TN ½-11 1/ TN ½-11 3/ TN ½ ½ 50TN ½-11 1¼-11½ 50TN ½-11 1½-11½ 50TN / TN ½ 50TN ¼-11½ 50TN ½-11½ 50TN ½ 50TN Part Number NPT BSPT 50NT /8-27 1/ NT /4-18 1/ NT /4-18 1/ NT /4-18 3/ NT /8-18 1/ NT /8-18 3/ NT /8-18 1/ NT /2-14 3/ NT /2-14 1/ NT /2-14 3/ NT /4-14 1/ NT /4-14 3/ NT / NT ½ 3/ NT ½ NT ½ 1¼-11 50NT ¼-11½ NT ¼-11½ 1¼-11 50NT ¼-11½ 1½-11 50NT ½-11½ 1½-11 50NT ½ JT / / JT / / JT / / JT / / JT /2-20 1/ JT /2-20 1/ JT /2-20 3/ JT series continued next column 10JT / / JT / / JT / / JT / / JT / / JT /4-16 1/ JT /4-16 3/ JT /4-16 1/ JT /4-16 5/ JT /4-16 3/ JT / JT /8-14 3/ JT /8-14 1/ JT /8-14 3/ JT / JT / / JT / / JT / / JT / JT / / JT / / JT / JT / / JT / / JT / JT / / JT / / JT /8-12 3/ JT / JT / / JT / / JT / JT / / JT / / JT / JT / / JT / JT /2-11
5 90 Elbow Branch Tee 14JT / / JT / / JT / / JT / / JT /2-20 1/ JT /2-20 1/ JT /2-20 3/ JT / / JT / / JT / / JT / / JT / / JT /4-16 1/ JT /4-16 3/ JT /4-16 1/ JT /4-16 3/ JT /8-14 3/ JT /8-14 1/ JT /8-14 3/ JT / JT / / JT / / JT / JT / / JT / JT / / JT / JT / / JT / / JT / JT / / JT / / JT / JT / / JT / / JT / / JT / / JT /2-20 1/ JT /2-20 1/ JT /2-20 3/ JT / / JT / / JT / / JT / / JT / / JT /4-16 1/ JT /4-16 3/ JT /4-16 1/ JT /4-16 3/ JT /8-14 3/ JT /8-14 1/ JT /8-14 3/ JT / JT / / JT / / JT / / JT / / JT / JT / / JT / JT / / JT / / JT / / JT / JT / / JT / / JT / JT Part Number JIC JIC BSPT AJJT / / /8-28 AJJT / / /4-19 AJJT / / /4-19 AJJT / / /8-19 AJJT /4-16 3/4-16 1/2-14 AJJT /4-16 3/4-16 1/2-14 AJJT /8-14 7/8-14 1/2-14 AJJT / / /4-14 AJJT / / AJJT / /8-12 1¼-11 AJJT / /8-12 1½-11 Run Tee JIC AJTJ / /8-28 7/16-20 AJTJ / /4-19 7/16-20 AJTJ / /4-19 9/16-18 AJTJ / /8-19 9/16-18 AJTJ /4-16 3/8-19 3/4-16 AJTJ /4-16 1/2-14 3/4-16 AJTJ /8-14 1/2-14 7/8-14 AJTJ / / /16-12 AJTJ / /16-12 AJTJ / / /8-12 AJTJ / / /8-12
6 BSPT Male to JIC Female Swivel JIC Male to BSPT Female Solid 10FT series continued from last column Part Number BSPT JIC 20TJ /8-28 7/ TJ /4-19 7/ TJ /4-19 1/ TJ /4-19 9/ TJ /8-19 1/ TJ /8-19 9/ TJ /8-19 3/ TJ /2-14 3/ TJ /2-14 7/ TJ / / TJ / / TJ / / TJ / TJ / / TJ / /8-12 BSPT Male to JIC Female Swivel 90 Elbow Part Number BSPT JIC 29TJ /4-19 7/ TJ /4-19 9/ TJ /8-19 9/ TJ /2-14 3/ TJ /2-14 7/ TJ / / TJ / JT / / JT / / JT /2-20 1/ JT / / JT / / JT /4-16 3/ JT /4-16 1/ JT /8-14 3/ JT /8-14 1/ JT / / JT / /4-14 ORS Male to BSPT Male 10FT / / FT / / FT / / FT / / FT / / FT / / FT / / FT / / FT / FT / FT FT / / FT / FT / / FT / / FT / FT / / FT / ½-11 10FT series continued next column 10FT / FT / / FT / ½-11 10FT / FT ½-11 10FT ORS Male to BSPT Male 45 Elbow This series to be added late FT / / FT / / FT / / FT / / FT / / FT / / FT / FT / / FT / FT / FT / / FT / FT / / FT / / FT / FT
7 Male ORS to Male BSPT 90 Elbow British Standard Pipe Tapered 19FT / / FT / / FT / / FT / / FT / / FT / / FT / / FT / / FT / / FT / / FT / / FT / FT / FT / / FT / FT / / FT / ½-11 19FT ½-11 19FT
Thread and Connector Identification
How to Use this Section This section is intended as an aid to identifying the most popular threads on hydraulic hose couplings and adaptors, and hydraulic equipment. BSP, Metric, American and Japanese
More informationThread and End Connection
www.swagelok.com and End Connection I d e n t i f i c a t i o n G u i d e Contents Introduction and End Connection Terminology.. 4 General Terminology................... 5 Step-by-Step Identification
More informationThread Identification Guide
Thread Identification Guide At Trimantec, our sales department gets a number of questions regarding technical specs for industrial parts. One of the concepts that seems to stump a lot of people is port
More informationlimiting factor on the thread type used.
1 Definition The diameters, threads per inch (TPI) and thread pitch, etc. are necessary to completely identify a thread. In a shop, specialty gauges are required to accurately gauge or identify threads.
More informationUnderstanding pipe threads: types and designations
WHITE PAPER 8008 Understanding pipe threads: types and designations By Mark Schmidt Applications Engineer CPC (Colder Products Company) Different types of screw threads have evolved for fastening and hydraulic
More informationHydraulic Adapters STEEL PIPE ADAPTERS NPTF DRY SEAL PIPE ASSEMBLY INSTRUCTIONS. Steel Pipe Adapters. Steel Pipe Adapters. Hydraulic.
CONFORMANCE SAE J54 for hex nipples, expanders, elbows, tees and crosses SAE J54, J50 and J5 for bushing and plugs. Temperature Range -65 0 F to +400 0 F MATERIALS - SAE L4 carbon steel plated zinc with
More informationHYDRAULIC STEEL BRAKE LINES
36 B9 MISCELANEOUS HYDRAULIC STEEL BRAKE LINES DOMESTIC CAR AND TRUCK STANDARD INVERTED FLARE BOTH ENDS HYDRAULI STEEL BRAKE LINE B9-HL3008 3/16" 8" 10 B9-HL3012 3/16" 12" 10 B9-HL3020 3/16" 20" 10 B9-HL3030
More informationMeasuring Pipes and Pipe Fittings
Measuring Pipes and Pipe Fittings by Larry Johnston When you repair or modify home plumbing, knowing the kind and size of pipe you need can save you time and trouble not to mention trips to the hardware
More information8' HYDRAULIC HOSE & ADAPTER DISPLAY Page 1 of 6 rev032318
800.459.8423 Page 1 of 6 rev032318 4ft Section 4ft Section A5 A40 A50 A60 A70 A83 A40 A50 E30 A19 A40 A15 A15 A40 A50 A85 B90 B110 B120 C130 C140 C150 C160 E210 B60 D90 D100 D110 D130 A50 A60 A70 B80 B88
More informationThe One Stop Shop for Automotive Plumbing
BQAP-0110 INNOVATIVE SOLUTIONS FOR AUTOMOTIVE PLUMBING The One Stop Shop for Automotive Plumbing Lab Tested - Tuff! AUTOMOTIVE PLUMBING Catalog www.brakequip.com Copyright 2010 $1.50 USA BRAKEQUIP Tube
More informationSINGLE POINT TOOLS. Mini Boring Bars Mini Boring Bars come in a range of diameters from to inch. They are fluted for maximum strength.
SINGLE POINT TOOLS All single point tools are designed for internal machining on a lathe. The helical boring bars can be used for both lathe and mill applications. All cutting tools are made from premium
More informationFITTINGS & GAUGES 20,000 PSI
PRESSURE GAUGE Features 4" high visibility face with laminated safety glass dial cover Accurate within +/- 0.5% of full scale range Stainless steel case and internals Heavy-duty movement Glycerine-filled
More informationKerkau Manufacturing. B16.5 Flange Book
Kerkau Manufacturing B16.5 Flange Book TABLE OF CONTENTS Revision 1 Title Page Table of Contents Tolerance Page Permissible Imperfections Dimensions of Flange Facings (all pressure rating classes) Dimensions
More informationSECTION CONTENTS ADAPTOR SERIES. General Information. Explanation of ISO Pipe Thread. Thread Symbol List. ANSI-KF Tubulated Adaptor
SETION ONTENTS 05 General Information Explanation of ISO Pipe Thread Thread Symbol List ANSI-KF Tubulated Adaptor ANSI-KF Tubulated Adaptor with O'Ring Groove F-ISO Tubulated Adaptor F-KF Tubulated Adaptor
More informationParts Manual 900 Hay Hiker
Parts Manual 900 Hay Hiker Part Number K49078-04 IMPORTANT: ALL ITEMS ARE IDENTIFIED WITH A PART NUMBER. Some of the smaller parts such as bolts, nuts, washers, etc. are not all shown, however, the quantity
More informationPitch Perfect Threading. Pitch Perfect Threading
Pitch Perfect Threading 1 2 Pitch Perfect Threading 3 Process considerations Threading methods Existing Is the process stable today Is the productivity maximized Is chip control acceptable Is the quality
More informationTap Drill Chart. Metric Tap Drill Size (Recommended Drill Sizes Suitable for 6H Tolerance) Roll Form Tap Drill Size
Tap Drill Chart Tap Size Nom. Size Tap Cutting Tap Drill Size Metric Tap Drill Size (Recommended Drill Sizes Suitable for 6H Tolerance) Roll Form Tap Drill Size Machine Screw Sizes NC & NF Tap Size Cutting
More informationtubing & fittings section guide
tubing & fittings Increasing demands for purity and reliability make the correct selection of materials essential. Used in a wide range of applications and industries such as electronics, chemical processing
More informationProducts catalogue (I-P Edition)
Products catalogue (I-P Edition) Products catalogue (I-P Edition) FROM QUALITY OUR NATURAL DEVELOPMENT Active in the industry of Refrigeration and Air Conditioning for fifty-five years, Castel is well-established
More informationParts Manual 881 Hay Hiker
Parts Manual 881 Hay Hiker Part Number K20393P-06 IMPORTANT: ALL ITEMS ARE IDENTIFIED WITH A PART NUMBER. Some of the smaller parts such as bolts, nuts, washers, etc. are not all shown, however, the quantity
More informationUNSIGNED HARDCOPY NOT CONTROLLED
Subject: APPROVED BY STATUS PURPOSE AFFECTED FUNCTIONS s Manager, Hardware Engineering Maintenance Revisioin Establishes requirements for the manufacture and inspection of pipe threads. L-3 Communications
More informationPRICE BID T Supply of Various Brass / SS valves & fittings for unit # 1 to 4.
GUJARAT STATE ELECTRICITY CORPORATION LIMITED ISO 9001:08, ISO 1001:0 and OHSAS 18001:07 CERTIFIED T HERMAL POWER ST AT ION, UKAI U K A I D A M 3 9 6 8 0, D I S T R I C T : T A P I Phone : 0262-233231,
More informationPureFlow PEX Crimp Zero Lead Fittings for Use with Viega PureFlow Tubing. Potable Water. Other
Project: Engineer: Contractor: Submitted By: Potable Water Other 1 of 10 Technical Data Materials: Fittings... Eco Brass or Polymer Crimp Rings... Copper (black) MANABLOC Manifolds... Polysulfone (plastic)
More informationFITTINGS. Pneufit C composite and Pneufit M fittings Metric Ø 3 to 16 mm O/D tube
Ø 3 to 16 mm Releasable stainless-steel grab-ring to grip nylon or polyurethane (8 or 9 durometer). Nickel plated brass components. Pre-applied thread sealant on all taper threads and recessed captive
More informationIso Metric Screw Thread Chart
We have made it easy for you to find a PDF Ebooks without any digging. And by having access to our ebooks online or by storing it on your computer, you have convenient answers with iso metric screw thread
More informationSpecification
Previous Edition Specification 2018-06 Class: Executing guidelines Class No.:62 Tapped holes for push-in connections JED system Voss Company 388 Abbreviated Title 2016-04 Tapped h.push-in con. Voss 852
More informationExtender Conduit Box. VIVOTEK Fixed Dome Series. Installation Guide. Using AM-712 conduit box, AP-FXC-0200 PoE Extender, and compatible accessories
AM-712_ig_VVTK_rev1.2_20150324.indd 1 VIVOTEK Fixed Dome Series Extender Conduit Box Installation Guide Using AM-712 conduit box, AP-FXC-0200 PoE Extender, and compatible accessories Corresponding part
More informationBolts Carriage Elevator Eye Hex Shoulder Specials Square Head Step. Drills, Taps, & Bits. Hex Capscrews Grade 8 Grade 5 Grade 2 A325 A490 Specials
AU-VE-CO Bolts Carriage Elevator Eye Hex Shoulder Specials Square Head Step Concrete Anchoring Adhesives Anchor Bolts Drop Ins Wedge Pins Cotter Dowel Hitch Spring Roll Taper Pipe Fittings Power Coil EZ
More informationThreading - Hand Taps - Button Dies - Die Nuts - Screw Extractors - Holders - Sets THREADING
Threading - Hand Taps - Button Dies - Die Nuts - Screw Extractors - Holders - Sets THREADING Threading Threading Index 198 Dies Carbon, Button Dies BA 198 Dies Carbon, Button Dies BSB 197 Dies Carbon,
More informationWeco 3" 1505 Hammer Union
Hammer Union We put you first. And keep you ahead. Hammer Unions, also called Wing Unions, are quick makeup and break-out pipe and fitting connectors that have been used in the oil industry since the early
More informationFORGED BRASS & STEEL FITTINGS "NPT" and "NPT 45 SAE"
FORGED BRASS & STEEL FITTINGS "NPT" and "NPT 45 SAE" BRASS FLARED TUBE FITTINGS "STANDARD FLARE SAE 45 " FITTING CONNECTIONS RANGE Standard MALE FLARE SAE 45 Standard FEMALE FLARE SAE 45 Standard MPT (male
More information( This link will provide you with a list of all ISO-6983 G-Codes
CUSTOM HAZARDS CUSTOM HAZARDS CUSTOM HAZARDS In this lesson I am going to explain how to circle interpolate a 1/8-27 NPT with a formed thread E-Mill using G-Code on a vertical mill. I have provided the
More informationTH READ GAGES Certification of Compliance to Class (Short Form)... No Charge Certification of Calibration to Size (Long Form)...$15.
New Swanson Gages TH READ GAGES Certification of Compliance to Class (Short Form)... No Charge Certification of Calibration to Size (Long Form)...$. / member TA PER PIPE GAGES Certification of Compliance
More information5.1 MUELLER CORPORATION VALVES. MUELLER 300 Ball Type Corporation Valves
MUELLER CORPORATION VALVES 5.1 Shaded area indicates changes Rev. 4-14 Machine inserted corporation stops were developed by Hieronymus Mueller in conjunction with his development of the drilling and tapping
More informationFire & Forestry Fittings
& Forestry Fittings G80B couplings are economically priced and are commonly found on stand-by and cabinet fire hoses. They feature rocker lugs on the female coupling only. Standard couplings come with
More informationSCREW THREADS. = minor diameter. d 3. d 2. = pitch diameter
ISO : 6 Part 2 DIN : Part /20 Metric (ISO) screw thread, coarse series -M- T-00 T-002 for M to incl. M,4, fit H/6h The bold lines indicate the maximum material profiles. The maximum material profile of
More informationParts Manual. Field-Pro Heavy Harrow Bar. Part Number H
Parts Manual Field-Pro Heavy Harrow Bar Part Number H28542-04 IMPORTANT: ALL ITEMS ARE IDENTIFIED WITH A PART NUMBER. Some of the smaller parts such as bolts, nuts, washers, etc. are not all shown, however,
More informationGRACO AIRPRO AIR SPRAY GUN
GRACO AIRPRO AIR SPRAY GUN PART NUMBERS AND SCHEMATICS GUIDE Company Profile Since 1944, Marco has developed a strong tradition of providing innovative and reliable products and services to the surface
More informationLate Spiders - Forming Bubble Flares on Brake Lines
Late Spiders - Forming Bubble Flares on Brake Lines Brake lines on 30 year old cars often require replacement. In addition to the inevitable corrosion, the connections are damaged during multiple replacements
More informationGOST TUBING AND COUPLINGS
GOST 633-80 TUBING AND COUPLINGS Tubing is used for oil and gas production. Tubing shall be made seamless, plain- or upset end and couplings with high-seal connections. Coupling-free connections are possible.
More informationThreading -Hand Taps -Button Dies -Die Nuts -Screw Extractors -Holders -Sets
Threading Threading -Hand Taps -Button Dies -Die Nuts -Screw Extractors -Holders -Sets Threading Threading Index 148 Threading Taps Carded 149 Threading Taps Bulk Metric 150 Threading Taps Bulk Metric
More informationBrass Compression Fittings
15 Brass Compression Fittings Product Applications For use with potable water, instrumentation, hydraulic and pneumatic systems. Designed to be used with aluminum, copper and plastic tubing. Not recommended
More informationPIONEER TRADING CO., LTD.
PRECISION KURODA LTD. OIL COUNTRY GAUGES API THREAD GAUGES PREMIUM CONNECTION GAUGES THREAD MEASURING INSTRUMENTS CONTACT TO: PIONEER TRADING CO., LTD. 4-1 Kuzuha-Asahi 3-Chome Hirakata Osaka 573-1111,
More informationA Thread In The Tangle Legends Of Fyrsta 1 Sabrina Flynn
A THREAD IN THE TANGLE LEGENDS OF FYRSTA 1 SABRINA FLYNN PDF - Are you looking for a thread in the tangle legends of fyrsta 1 sabrina flynn Books? Now, you will be happy that at this time a thread in the
More informationDF-Series Pneumatic Couplings
Interchange Data: Parker 20-Series Manual Interchange (F-Series) Parker 30-Series Automatic Interchange (D-Series) Foster 3, 4, 5, and 6 Series Hansen 1000, 400, 500 (F-Series) Hansen 3000, 4000, 5000,
More informationUnit 047: Advanced Turning. Screw threads
Unit 047: Advanced Turning Screw threads Starter activity When was the screw thread invented? Who was the inventor of the most famous screw thread form? When was the first unified British thread invented
More informationMODELS: CC3730TE / CC3740TE
DIAMOND P R O D U C T S CONCRETE SAW PARTS LIST MODELS: CC0TE / CC0TE February 00 Part #00 Table of Contents Pictorial Page Index....., Belt Guard Assembly... Controls Legend....... Belt Tensioner Assembly....
More informationPrecision Double Row Cylindrical Roller Bearings With Tapered Bore
Roller Bearings With Tapered Bore High precision cylindrical roller bearings are bearings with a low cross section, high load carrying capacity and speed capability. These properties make them particularly
More informationDEPARTMENT OF DEFENSE HANDBOOK CLASSIFICATION OF DEFECTS OF FLARELESS AND BEAM SEAL FITTINGS
NOT MEASUREMENT SENSITIVE MILHDBK1655 17 March 1997 SUPERSEDING MILSTD1655 10 April 1975 DEPARTMENT OF DEFENSE HANDBOOK CLASSIFICATION OF DEFECTS OF FLARELESS AND BEAM SEAL FITTINGS This handbook is for
More informationMEET OUR TEAM. North American Tool Corporation 215 Elmwood Avenue, PO Box 116, South Beloit, IL CURTIS LANSBERY PRESIDENT & CEO
MEET OUR TEAM CURTIS LANSBERY PRESIDENT & CEO BRIAN KOBISCHKA VICE PRESIDENT & CFO PHIL SAMUELS DIRECTOR OF SALES & MARKETING JEFF SHERMAN DIRECTOR OF MANUFACTURING JON ANDERSON JOY BALDWIN BARB BISHOP
More informationTAP AND DRILL BIT SELECTION GUIDE TAPS AND DIES. NATIONAL STANDARD THREADS Imperial (NC, NF, NS, UNC and UNF)
TAP AND DRILL BIT SELECTION GUIDE NATIONAL STANDARD THREADS Imperial (NC, NF, NS, UNC and UNF) THREAD NOMINAL SIZE THREAD STANDARD DRILL SIZE* DECIMAL 0 80 NF 3/64".0469" 1 64 NC 53.0595" 1 72 NF 53.0595"
More informationTaps. Taps - Technical Info. Torque Cut High Performance HSSE Ring Colored Taps Technical Information. - Technical Information
Torque Cut High Performance HSSE Ring Colored Taps Technical Information RedLine Torque Cut High Performance Taps give you greater performance when tapping Steel Alloys, Stainless Steels, Titanium and
More informationPipe threads are threads that seal. Pipe threads seal by various methods, but the ones we are going to concern ourselves
PIPE THREADS Pipe threads are threads that seal. Pipe threads seal by various methods, but the ones we are going to concern ourselves with here are those that are designed to seal at the threads. For threads
More informationTechnical. Toolholding & Tapping. Product Warranty
Technical 4 Product Warranty Parlec Inc. warrants all tools, tooling systems, and tool presetters to be free of defects in manufacturing and materials for a period of one year from the date of shipment.
More information3 POINT HITCH LOGSPLITTER
3 POINT HITCH LOGSPLITTER OPERATOR S MANUAL AND PARTS LIST TABLE OF CONTENTS SECTION PAGE 1. GENERAL INFORMATION 1 2. SAFETY GUIDELINES 2 2.1 DEFINITIONS 2 2.2 SAFE OPERATING PROCEDURE 3 3. LOG SPLITTER
More informationREPUTE tube fittings are manufactured to stringent quality control program and internal standards which
Introduction: REPUTE tube fittings are manufactured to stringent quality control program and internal standards which assure the highest quality available in the industry. Two ferrule tube fittings are
More information...Your environment is our business
PEX-c Plumbing Product Catalog Valid as of February 1, 2009 Call 888-266-7684 USA or 800-969-7684 CAN or visit our web site at www.roth-america.com...your environment is our business Table of Content Tubing
More informationHow To Use This Catalog
How To Use This Catalog Welcome To RSVP Circular Chasers Axial Radial Specialty Tools Welcome To The RSVP Tooling Interactive Catalog Section Clickable & Touch Links Within each page we have included a
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z540-1-1994 MICRO LABORATORIES INC. 7158 Industrial Park Mentor, OH 44060 Keith Kokal Phone: 440 918 0001 CALIBRATION Valid To: July 31, 2019 Certificate
More informationINDIAN TOOL MANUFACTURERS (DIVISION) PRICE LIST 412 (Effective from 01/04/2012)
Trade Combine Birla Precision Technologies Limited INDIAN TOOL MANUFACTURERS (DIVISION) PRICE LIST 412 (Effective from 01/04/2012) HSS PARALLEL SHANK (JOBBER SERIES) TWIST DRILLS IS: 5101 MM SIZE INC H
More informationAssembly instructions
Assembly instructions Important notes on VOSS assembly instructions In order to ensure maximum performance and functional reliability of VOSS products, the respective assembly instructions, operating conditions
More informationDigital conductivity transmitter
Digital conductivity transmitter Compact version with integrated conductivity electrodes Remote version with seperated transmitter for short (15 ft.) or long (1500 ft.) distance Commissioning is easy due
More informationRP-VE416FS/FSD VE416FS and VE416FSD Roll Grooving Tools
PARTS ORDERING INFORMATION When ordering parts, the following information is necessary for Victaulic to process the order promptly: 1. Tool Model Number VE416FS or VE416FSD 2. Tool Serial Number The Serial
More informationDETAIL SPECIFICATION SHEET FITTINGS, PIPE, CAST BRONZE, SILVER-BRAZING; REDUCING COUPLING, BUSHING, AND ADAPTER, PIPE
INCH-POUND MIL-DTL-1183/8B 20 December 2016 SUPERSEDING MIL-F-1183/8A 5 May 1987 DETAIL SPECIFICATION SHEET FITTINGS, PIPE, CAST BRONZE, SILVER-BRAZING; REDUCING COUPLING, BUSHING, AND ADAPTER, PIPE This
More informationFLARE COMPRESSION CPVC IRON PIPE HOSE BARB GARDEN HOSE DRAIN/SHUT-OFF COCKS NEEDLE & HUMIDIFIER VALVES
Brass Fittings Innovative solutions delivered Better engineering, better selection, better results FLARE COMPRESSION CPVC IRON PIPE HOSE BARB GARDEN HOSE DRAIN/SHUT-OFF COCKS NEEDLE & HUMIDIFIER VALVES
More informationI-VICFLEX.VS1. Victaulic VicFlex Style VS1 Dry Sprinkler WARNING WARNING TECHNICAL DATA BEND CHARACTERISTICS INSTALLATION INSTRUCTIONS SIDEWALL
INSTALLATION INSTRUCTIONS I-VICFLEX.VS1 Victaulic VicFlex Style VS1 Dry Sprinkler SIDEWALL Y Read and understand all instructions before attempting to install any Victaulic VicFlex Style VS1 Dry Sprinklers.
More informationPIPING NOMENCLATURE. Header Branch connection Valve Flange Expansion joint Expansion loop Pipe support Reducer Elbow
PIPING COMPONENTS Piping components are mechanical elements suitable for joining or assembly into pressure-tight fluid containing piping systems. Components include pipe, tubing, fittings, flanges, gaskets,
More informationIndex. Accessories WE RESERVE THE RIGHT TO DISCONTINUE MODELS, OR CHANGE SPECIFICATIONS WITHOUT NOTICE OR INCURRING OBLIGATION
Index 9.00.01 07/2010.C Accessories Mounting Kits and Cross Reference - 300, 400 Series... 9.01.01 Mounting Kits - 500, 700, 900 Series... 9.01.02 Stud Nuts & Kits... 9.02.01 Stud Nuts & Kits - ISO 03,
More informationFLARE COMPRESSION CPVC IRON PIPE HOSE BARB GARDEN HOSE DRAIN/SHUT-OFF COCKS NEEDLE & HUMIDIFIER VALVES
Brass Fittings Innovative solutions delivered Better engineering, better selection, better results FLARE COMPRESSION CPVC IRON PIPE HOSE BARB GARDEN HOSE DRAIN/SHUT-OFF COCKS NEEDLE & HUMIDIFIER VALVES
More informationGB/T Translated English of Chinese Standard: GB/T NATIONAL STANDARD OF THE
GB/T 9-00 Translated English of Chinese Standard: GB/T9-00 www.chinesestandard.net Sales@ChineseStandard.net GB NATIONAL STANDARD OF THE PEOPLE S REPUBLIC OF CHINA ICS.00.0 J 0 GB/T 9-00 Replacing GB/T
More informationPlumbing Part II - Hand Pump
Plumbing Part II - Hand Pump Nelson Riedel Nelson@NelsonsLocomotive.com Initial: 7/17/03 Last Revised: 06/06/2004 The hand pump located in the tender water tank is a backup pump should the axel pump fail
More informationAeroquip Rynglok Tube Repair System
Aeroquip Rynglok Tube Repair System The system of choice for aerospace hydraulic tubing repair Approved by Boeing, Airbus, major airlines, and all branches of the U.S. military The new tube fitting performance
More informationPLUMBING AND GAS PRODUCTS
BARCLAY ENGINEERING LTD PRODUCTION SPECIALISTS OF BRASSWARE,ALUMINIUM &STAINLESS STEEL 14-1 HORLOR STREET NAENAE P.O. BOX 3501 NAENAE LOWER HUTT 5041 NEW ZEALAND Phone: Fa: (04) 3 500 (04) 3 505 www.barclayengineering.co.nz
More informationAPPLICATION CHART. Tractor Model * Wood Splitter HOME TRACTORS ATTACHMENTS INDEX
R Ingersoll HOME WOOD SPLITTER J31, K31 AHSHD, HSHD, J32, K32, J32 J34, K34, L34 AHSWD, HSWD, K36 Parts Catalog 8-2052 NOTE: This Catalog replaces Catalog 8-2051 TRACTORS ATTACHMENTS INDEX PAINT GENERAL
More informationCONCRETE SAW PARTS LIST
CONCRETE SAW PARTS LIST MODEL CC00XL ELECTRIC & HYDRAULIC UNITS August, 0 Part # 0 Table of Contents Common Parts.. Front Axle Assembly... Rear Axle Assembly... Transmission Assembly... Blade Shaft Assembly
More informationSteel Couplings. Product Specifications Welded steel couplings both galvanized and black in diameters from 1/8 up to 4
Merchant Couplings Steel Couplings Merchant Couplings Product Specifications Welded steel couplings both galvanized and black in diameters from 1/8 up to 4 Technical Specifications Standards: Product complies
More informationMAKE SURE THE PIPE FITS
Figure 1 MAKE SURE THE PIPE FITS Pipe thread fittings in aviation BY CAROL AND BRIAN CARPENTER PIPE THREADS ARE USED in virtually every aircraft built today, from ultralights to Boeing s finest. In sport
More informationSpecification Tapped holes f. coupl Scope Allocation of the JED Numbers General...
WABCO Specification 2003-07 Class: Engineering Guidelines Class No.:62 Tapped Holes for Couplings JED according to ISO 4039-2 464 Previous Edition Abbreviated Title 1985-11 Tapped holes f. coupl. 852 004
More informationLiquid Tight Conduit Connector With Internal Threads, Female Liquid Tight Conduit Fittings ( YCM )
Liquid Tight Conduit Connector With Internal Threads, Female Liquid Tight Conduit Fittings ( YCM ) No. Trade Dimensions (mm) Size I.D. A B C Threads YCM-03 3/8 11.2 28.3 44.6 13.2 PT 1/2 YCM-04 1/2 14.8
More informationDelikon Stainless Steel Liquidtight Connectors offer corrosion resistance and the strength of stainless steel for the highest levels of endurance.
Corrosion Resistant liquid tight conduit fittings for use with flexible liquid tight metallic conduits, flexible liquid tight non metallic or PVC coated flexible metal conduit. * Liquidtight, Raintight,
More informationUniversal Pipe Cutter (UPC) Replacement Parts Booklet
Universal Pipe Cutter Universal Pipe Cutter (UPC) Booklet Table of Contents Drawing Number U U U U U U U U8 U9 U0 U Description UPC Front View UPC Pneumatic Rear View UPC Hydraulic Rear View UPC Mainframe
More informationAUTOMOTIVE FITTINGS, HOSES, LINES AND TUBING
Catalog 76 AUTOMOTIVE FITTINGS, HOSES, LINES AND TUBING THE COMPLETE STORY There s never been a more complete collection of automotive fittings assembled into one easy-to-use display. The new Big Brass
More informationHigh Performance HSSE Color Ring Tap Speeds
Torque Cut High Performance HSSE Color Ring Taps RedLine Torque Cut High Performance Taps give you greater performance when tapping Steel Alloys, Stainless Steels, Titanium and a variety of other Steels
More informationno mm no Dividers with scriber 150 mm NEW Square wedge-shaped knife edges on the length side
Summer Promotion valid until 30.06.2013 all quoted prices are incl. VAT for deliveries to EU countries to customers with valid VAT-no. and for deliveries in non EU member countries the VAT is not applicable
More informationIF YOU DON T SEE IT HERE
www.smithfast.com Drills & Taps & Bits Screws Cotter Drilling Bolts / Hex Capscrews Lag Carraige Hitch Grade 8 Machine Grade Elevator 5 Sheet Spring Metal Roll Grade Eye 2 Square Taper Head set A325 Hex
More informationSTAUFF. Stauff-Connect Machinery & Services. Local Solutions for Individual Customers Worldwide
STAUFF Stauff-Connect Machinery & Services Local Solutions for Individual Customers Worldwide Introduction When developing pipework for any project, whether it be modest or a more signifi cant venture,
More informationREVERSE CIRCULATION. www. .com MINERAL EXPLORATION ENVIRONMENTAL GEOTECHNICAL GEOTHERMAL ROTARY SONIC HDD
REVERSE CIRCULATION MINERAL EXPLORATION ENVIRONMENTAL GEOTECHNICAL GEOTHERMAL ROTARY SONIC HDD www..com REVERSE CIRCULATION DRILLING TABLE OF CONTENTS REVERSE CIRCULATION DRILLING OVERVIEW...2 REVERSE
More informationHT-Series Hydraulic Couplings
Interchange Data: Interchangeable to ISO16028 Parker FEM-Series, Snap-Tite 74-Series, Hansen FF, Aeroquip/Eaton FD89, Stucchi FIRG/Series 'A', Faster FFN/FFI/2FFN/2FFI, Safeway FF49-Series Materials: Machined
More informationA BALAX, INC. GUIDE TO TAPPING IN THE 21ST CENTURY
2011 Threading Solutions for Every Industry A BALAX, INC. GUIDE TO TAPPING IN THE 21ST CENTURY At Balax, we recognize the increased demands placed on our customers for improved quality and lower production
More informationBeaded Hose Barbs 4601 (430292) 4603 (430392) 2 2 Pg. 83. Pg. 86 Beaded Hose Barb x MB 1-HS 2-MB. Pg. 85 Beaded Hose Barb x MB 1-HS 2-MB
Pressure Connections takes great pride in each fitting we sell. Standard material for our is steel with a RoHs compliant 96-hour salt spray finish that exceeds the SAE 72-hour salt spray requirement. For
More information240 Owner s Manual & Parts Book
0 Owner s Manual & Parts Book Purchase Date Serial Number Model Number Tractor Model Dealer PN: 3-188 Serial #:083-88, 0, 07-... Date --0 Contents Description Page To The Owner, Maintenance Safety Precautions
More information670 SCREWED FIX-IT KITS. Page WOOD SCREWS DOWEL PINS DOWELS STUDDING. Page Pages GROUP GROUP 651 EXTRACTOR GROUP 635 GROUP 650
Page...........556-559 635 WOOD SCREWS 650 DOWEL PINS 651 EXTRACTOR DOWELS 670 SCREWED STUDDING Page.......................560 Page.......................561 Page.......................561 Pages......................561
More informationPARTS LIST. Model MFT-HD Cleco
PARTS LIST Model MFT-HD Cleco 0 0 0 0 0 0 0 0 HD-0- Centershaft HD-0- Centershaft Screw HD-0- Lift Collar HD-0- Eyebolt HD-0- Hex Nut HD-0- Draw Rod HD-0- Washer - Draw Rod HD-0- Face Plate, " Diameter
More informationBULLDOG CUTTING TOOLS PROUDLY MADE IN THE USA THREAD MILLING
BULLDOG CUTTING TOOLS THREAD MILLING 126 Jackson St. Red Bud, IL 62278 Toll Free Phone: 1 (844) 441-5624 Fax: (618) 282-2831 sales@bulldogcut.com PROUDLY MADE IN THE USA SAFETY PRECAUTIONS Cutting tools
More informationThermostat Conversion Kit Data Sheet CHOICE OF INSTALLATION
22-022 Thermostat Conversion Kit Data Sheet The Thermostat Conversion Kit was designed and packaged with the serviceman in mind. It allows a quick and easy replacement of competitive devices with a new
More informationthe same information given in two different 1. Dimensions should NOT be duplicated, or Dimension Guidelines Incorrect ways.
Dimension Guidelines 1. Dimensions should NOT be duplicated, or the same information given in two different ways. Incorrect 1. Dimensions should NOT be duplicated, or the same information given in two
More informationMain Drive Components
Pipe and Bolt Threading Machine Main Drive Components 0 0 Rear Centering Head Centering Jaw Set Spiral Pins () 00 Centering Scroll Retaining Ring 0 Rear Bearing 0 Oil Ball Valve () # - x / Screw Motor
More informationISO INTERNATIONAL STANDARD. Road vehicles Pneumatic braking systems Part 1: Pipes, male fittings and tapped holes with facial sealing surface
INTERNATIONAL STANDARD ISO 4039-1 First edition 1998-08-15 Road vehicles Pneumatic braking systems Part 1: Pipes, male fittings and tapped holes with facial sealing surface Véhicules routiers Dispositifs
More informationhttps://www.indiamart.com/airservicesgroup/
+91-8048109735 Air Services Group https://www.indiamart.com/airservicesgroup/ Our company ventured in dealing and supplying of a range of Auto Drain Valve, Aluminium Piping System and many more. We are
More informationTechnical Description Standard design with ball locking mechanism for high pressure applications. Rugged construction.
Ball Locking Parker 1/4" up to 3/4" SM-Series Technical escription Standard design with ball locking mechanism for high pressure applications. Rugged construction. dvantages size 1/2" and above feature
More information