WBMR SERIES. Features & Benefits. Multi-purpose Milling Ballnose Roughing WaveMill. Anti-rotational design
|
|
|
- Antony Sherman
- 5 years ago
- Views:
Transcription
1 Multi-urose allnose oughing WaveMill WM SEIES licable Insert: WDM Features & enefits Dedicated 2-flute ball nose endmill designed secifically for high erformance rough cutting of steels, alloys, and tool steels Provides maximum cutter efficiency for the most time consuming ortion of most machining oerations roughing Neutral insert edge with ositive relief on face is incredibly strong but consumes low amounts of horseower Strong tool steel body designed with anti-rotation lugs insures that cutting inserts are movement free, even at heavy feed rates and high cutting seeds X style cutter bodies allow the creation of art side walls with as little as three degrees of draft without side wall interference from the tool ti all the way to the face of a standard ISO Weldon shank tool holder hree searate lengths er diameter allow the end user to choose the best tool for the job at hand Cylindrical shank tooling allows extended reach, and the ossibility of customization along with the correct design for use with the latest high strength milling chucks Negative assembly tolerancing eliminates 3-dimensional surface violations due to cumulative tooling errors he erfect -2 unch for the roughing of dies and mold work when combined with our WC cutters Multiurose O & Modular mimillooling Max. D.O.C. adial & xial scon- UFO & ued C nti-rotational design Prevents insert breakage by ositively locking into,, & C. Max. 50% of ØD Max. 25% of ØD C for all WM Series allnose Endmills Style Style 2 Style Position ZNM3CX 2 ZNM3SX ZNM4CX ZNM4SX 2 ZNM5CX 2 ZNM5SX 3 & ZNM6X 3 & ZNM8X 4 SPM09308* eriheralinsert *Used in Extended ength of Cut Endmills only 324 Style N/ (I.C.) Style 4 licable Cutters WM075SX, MX, X, or CX WM00SX, MX, X, CX, SX, MX, or X WM25SX, MX, X, CX, SX, MX, or X WM50SX, MX, or X WM200SX, MX, or X WM00 & 25 SX, MX, or X
2 Multi-urose allnose oughing WaveMill WM NOSE ENDMI licable Insert: ZNM "C" style shank (cylindrical) ØD ØD WM Cutters (Standard ength) ØD Shank l 3 l WM075SX W ZNM3_X WM075MX W ZNM3_X WM075X W ZNM3_X WM00SX W ZNM4_X WM00MX W ZNM4_X WM00X W ZNM4_X WM00CX C * 9.25**.378 ZNM4_X WM25SX W ZNM5_X WM25MX W ZNM5_X WM25X W ZNM5_X WM25CX C *.25**.693 ZNM5_X WM50SX W ZNM6X WM50MX W ZNM6X WM50X W ZNM6X WM200SX W ZNM8X WM200MX W ZNM8X WM200X W ZNM8X Note: ll cutters require () Center CX insert and () Outer SX insert to accomlish the D diameter secified. he tolerance of the D diameter is +.000/ *eresents relieved ortion of cutter body **eresents straight ortion of cutter body US stocked item Screw Wrench WM075X FX0307N X0 WM00X FX0409N D5 WM25X FX05N D20 WM50X FX069N D25 WM200X FX069N D25 orque secifications for FX0307N insert screw is 8-22 in/lbs. orque secifications for FX0409N insert screw is 27-3 in/lbs. orque secifications for FX05N insert screw is in/lbs. orque secifications for FX069N insert screw is in/lbs. Modular UFO & ooling UFO & Multiurose Figure Figure 2 Figure 3 ZNM3CX ZNM3SX ZNM4CX ZNM4SX ZNM5CX ZNM5SX ZNM6X ZNM8X CZ30 CZ330 CZ350 CK300 CP200 CP300 Figure CX denotes insert (Fig. ) SX denotes insert (Fig. 2) Fig. 3 inserts are used in both and osition. US stocked item See ages running arameters 325
3 WM NOSE ENDMI licable Insert: ZNM, SPM Multi-urose allnose oughing WaveMill ØD SPM & Modular imillooling coned UFO & Multiurose WM Cutters (Extended ength) ØD Shank l 3 l & 2 Insert style W ZNM4_X SPM09308 WM00SX WM00MX W ZNM4_X SPM09308 WM00X W ZNM4_X SPM09308 WM25SX W ZNM5_X SPM09308 WM25MX W ZNM5_X SPM09308 WM25X W ZNM5_X SPM09308 Note: ll 0.750" -.250" cutters require () Center CX insert and () Outer SX insert to accomlish the D diameter secified. he tolerance of the D diameter is +.000/ *his dimension reresents the actual extension from holder. US stocked item Figure Figure 2 Figure 3 ZNM3CX ZNM3SX ZNM4CX ZNM4SX ZNM5CX ZNM5SX ZNM6X ZNM8X Figure CX denotes insert (Fig. ) SX denotes insert (Fig. 2) Fig. 3 inserts are used in both and osition. US stocked item CZ30 CZ330 CZ350 CK300 CP200 CP300 CK300 I.C. I.C. SPM US stocked item Insert Screw Wrench WM00X ZNM4_X FX0409N D5 WM25X ZNM5_X FX05N D20 WMX SPM09308 FX0409N D5 orque secifications for FX0409N insert screw is 27-3 in/lbs. orque secifications for FX05N insert screw is in/lbs. See ages running arameters 326
4 Multi-urose allnose Finishing WaveMill WMF NOSE ENDMI Features & enefits ly accurate fully ground insert offers reliable reeatability (within ") to simlify the finish milling rocesses of comlex 3-dimensional work Multi ground locking surfaces and screw-on insert design makes the cutter assembly suer strong and rigid he tool body design matches that of the WM line to rovide worry-free rogramming, insuring no side wall interference down to as little as 3 of draft without body modification of weldon style tools Each diameter is offered in multile lengths to allow alication of the shortest, most efficient length for the job CZ20, ZX coated carbide inserts efficiently cut hardened mold and die steels with low cutting forces and long tool life Shar helical cutting edge generates excellent surface finishes to reduce or eliminate time consuming hand olishing oerations New claming system Excellent index reeatability within " Modular UFO & ooling UFO & Multiurose Grade CZ20 Ultra hard ZX coating and K0 fine grain substrate rovide long tool life adius form accuracy ess than " Otimized cutting edge geometry Minimizes cutting force and rovides excellent surface finish 327
5 WMF ENDMI NOSE licable Insert: ZPGU Multi-urose allnose Finishing WaveMill ØD & Modular imillooling n- UFO & d Multiurose WMF Cutters (Standard ength) D d Shank l l 3 WMF0500S W ZPGU2S WMF0500M W ZPGU2S WMF W ZPGU2S WMF0625S W ZPGU2.5S WMF0625M W ZPGU2.5S WMF W ZPGU2.5S WMF0750S W ZPGU3S WMF0750M W ZPGU3S WMF W ZPGU3S WMF000S W ZPGU4S WMF000M W ZPGU4S WMF W ZPGU4S WMF250S W ZPGU5S WMF250M W ZPGU5S WMF W ZPGU5S US stocked item ZPGU2S ZPGU2.5S ZPGU3S ZPGU4S ZPGU5S US stocked item CZ20 ØD Screw Wrench WMF0500 FG0409F D5 WMF0625 FG053F D20 WMF0750 FG067F D25 WMF000 FG062F D25 WMF250 FG0825F D25 See ages running arameters 328
UPDATE. NEW Gold-QuadF 09 09mm IC Insert Sizes
Styles: End Mill 15G1F Face Mill 5G5F, 5G6F s: 1.000" - 3.000" Inserts: SDXS0904MPR-MM SDXS0904MPR-MR SDXS0904MPR-MR1 Grades: IN4004 IN4005 IN4030 IN4035 UPDATE NEW Gold-QuadF 09 09mm IC Insert Sizes Features
IABP4F/ABP4F. Four Flute Indexable Ball End Mills for High Efficiency Finishing SHANK STYLE MODULAR STYLE FEATURES
Four Flute Indexable Ball End Mills for High Efficiency SHANK STYE MODUA STYE FEATUES Four flute design provides improved productivity compared to traditional two-flute design adius tolerance of ±0.01mm
Indexable ball end mill for finishing. ABPFN type. Ball Precision F ABPFN type. New Product News No.1606E
Indexable ball end mill for finishing ABPFN type Ball Precision F ABPFN type New Product News No.1606E-1 2017-6 High cutting performance by S-shaped cutting edge! High helix edge shape provides a beautiful
LEADING SOLUTIONS IN THREAD MILLING TECHNOLOGY
LEADING SOLUTIONS IN THREAD MILLING TECHNOLOGY Thread with Maximum Confidence, Depth, Versatility and Economy. Emuge Shur-Thread TM, Threads-All TM, Vario-Z and NPT Solid Carbide Thread Mills; and Gigant-ic
Keeping the Customer First. Tungaloy Report TE1008-E5. Multi-functional endmill EVX. with centre cutting edge for plunge milling
Keeping the Customer First Tungaloy Report TE1008-E5 Multi-functional endmill EVX with centre cutting edge for plunge milling with centre cutting edge for plunge milling Features Modern machining processes
Double-sided positive insert for semi-finishing to finishing
MillLine Tungaloy Report No. 508-US DOMINI-MILL Double-sided positive insert for semi-finishing to finishing ACCELERATED MACHINING MillLine DoMini-Mill features the advantage of an economical 6-cornered
Flexible tool overhang lengths possible by combining the modular extension arbor and shank with insert run-out adjustment mechanism
Sumi Easy insert replacement Characteristics Achieves efficiency through high speed, high feeding ability!! (v c =50 to 500m/min, f = 0.4 to 1.2mm/rev) Compatibility with a wide range of cutting conditions
with better tools from Introducing: Dapra's New Modular Heads Designed to Screw On to Industry Standard Systems
CUTTING Times Vol. 4, Issue 1 with better tools from Dapra Corporation 66 Granby Street, Bloomfield, CT 06002 1-800-243-3344 860-242-8539 Fax 860-242-3017 Email info@dapra.com www.dapra.com Introducing:
The complete KASTO program: Economic sawing and storage of metal.
The comlete KASTO rogram: Economic sawing and storage of metal. EXPERTISE RIGHT DOWN THE LINE. For over 170 years, KASTO has been recognised for quality and innovation, and offers a comlete range of metal
Cylindrical shank version Indexable Insert Endmill
Cylindrical shank version Indexable Endmill ø1 - ø 1 ød ST-FCM1-0 -FCM- 0 -FCM0-0 ST-FCM0-0 ST-FCM0- ST-FCM- -FCM- -FCM- 1 1 ød 1 0 0 1 17 0 0 0 70 1 ARG00 ARG00 ARG00 ARG0 ARG0 CATAOG No. =The ength of
Indexable endmill for high precision finishing
MillLine Tungaloy Report No. 431-US BALLFINISH-NOSE Indexable endmill for high precision finishing ACCELERATED MACHINING MillLine Excellent surface finish and stable machining due to secure clamping and
Milling Series. Product Lineup M4. Milling Indexable Inserts. Milling Inserts Identifi cation System M9 Milling Inserts. Corner Angle 45 MOF45
1~12 eries Product ineup Indexable Inserts Inserts Identifi cation ystem Inserts 1 Corner Angle OF 22 OFX Easy edge adjustment 2 E 2 E-F Easy edge adjustment 28 D 1 O- / O / O- 2 Corner Angle R P / E Corner
Cutting Tools DIGEST Catalog
Cutting Tools DIGEST Catalog Insert Grade CVD Coating Innovation CA5 series Ultra fine interface increases adhesion strength to provide long tool life and stable machining High aspect ratio of α-al 2 O
+1-508-653-8897 800-992-4766 www.toolmex.com Dear Valued Customers, The TMX Team have broadened our line of round cutting tools and holders to ensure that you have the productivity tools that you need
New. Products2013.
T u n g a l o y www.tungaloy.com Company Overview Providing Complete Tooling Solutions for the Metal Removal and Industrial Product Sectors TUNGALOY is one of the world s leading manufacturers of carbide
Features. High Positive Rake Angle. Multi-Side Grinding. High Speed, High Feed Rate. Economical
Engraving This is a revolutionary new concept of engraving tools with indexable carbide inserts. They offer you the ability to produce HIGH QUAITY ENGRAVING in most materials. The latest coated carbide
Copy Milling Program Tools
Millstar face mills are equally useful on newer high velocity machines and older slower equipment and will optimize milling performance of all your machine tools. The hardened tool bodies can be run at
External Turning. Outline Review of Turning. Cutters for Turning Centers
Outline Review of Turning External Turning 3 External Turning Parameters Cutting Tools Inserts Toolholders Machining Operations Roughing Finishing General Recommendations Turning Calculations Machining
Drilling Tools. Common problems and solutions for drilling. Problem Cause Solution. Bend,distortion and slippage of machine and workpiece
Drilling Tools for solid carbide drills C Common problems and solutions for drilling Problem Cause Solution Drill breakage Bend,distortion and slippage of machine and workpiece Increase the rigidity of
Think efficiency, Think HSS MILLING
Think efficiency, Think HSS MILLING SUMMARY MILLING TOOLS 2 Zoom on a milling cutter 3 Which HSS for maximum efficiency? 4 Coatings for the best performance 5 Vocabulary 6 Choose the right design 7 Select
Product Overview. for perfect connections
Product Overview for perfect connections TOOL HOLDERS FOR DRILLING, TAPPING & REAMING Smart solutions for high quality clamping systems in tapping applications Tapping solution range from M1 M200 Quick
XMR01 XMR01. Indexable Milling Tools. High feed milling cutters B 119. Specification of tools XMR01 XMR01. S type insert, straight shank.
Tools S type insert, straight shank Specification of tools Stock ØD L1 L ød Number of teeth Z asic dimensions(mm) Weight (kg) 0 1 0. -0-G-SD09-0 1-0-G-SD09-0 1-0-G-SD1-0 1-0-G-SD1-0 1 1. Stock available
BDV/DV SHANK DUAL CONTACT. BDV/DV Shank
R DV/DV S P I N D E S Y S T E M DUA CONTACT DV/DV Shank DUA CONTACT DV/DV For High Speeds MEGA MICRO CHUCK PAT. Clamping diameter: ø0.45 - ø8.05 Ultra-slim design with world's smallest ø10 nut outer diameter.
Technical. Toolholding & Tapping. Product Warranty
Technical 4 Product Warranty Parlec Inc. warrants all tools, tooling systems, and tool presetters to be free of defects in manufacturing and materials for a period of one year from the date of shipment.
Features. Special forms are possible
Center Drill >> The is a trademark of Nine9, the developer of the first indexable center drill in the world.(patented) Offering an indexable insert system for the 1st time, Nine9 s design improves your
TAPPING CHUCKS & COLLETS
TAPPING CHUCKS & COLLETS CAT er Tension/Compression Holders 86 CAT er Rigid Holders 86 BT er Tension/Compression Holders 87 BT er Rigid Holders 87 HSK Tension/Compression & Rigid Holders 88 NMTB er Tension/Compression
SAW ARBORS B MADE IN THE * * * * * * * USA USA * * * * * * * A B C D E SSA-500
SAW ARBORS B SIDE MILLING SAW ARBORS With Quad Key Drive Assist FEATURES: The only SEMI-FLUSH keyed (removable) arbor for cutter with or without a drive key.0004 TIR Made from domestic 4340 aircraft alloy
MACHINE TOOL ACCESSORIES
DA80 COLLETS, COLLET CHUCKS AND KITS SERIES 992: Full /32" range of collapse. Concentricity within 0.0005" T.I.R. at collet nose assembled with chuck. Self release for rapid, easy operation. Interchangeable
TAW Drill. Indexable insert drill, yet always stable drilling. Stable drilling with indexable drill B060A. MIRACLE Coated VP15TF
B060A Stable drilling with indexable drill Indexable insert drill, yet always stable drilling Grade for high rigidity and longer tool life MIRACLE Coated MIRACLE coating displays high welding resistance
IASM /ASM. Small Diameter, Ultra High-Efficiency Indexable End Mills MODULAR STYLE FEATURES
IASM /ASM Small Diameter, Ultra High-Efficiency Indexable End Mills MODULAR STYLE FEATURES Small Diameter sizes from Ф3/8 to 3/4 (10mm to 20mm) can be used instead of solid end mills. JDMT inserts are
Features. High Positive Rake Angle. Multi-Side Grinding. High Speed, High Feed Rate. Economical
Engraving This is a revolutionary new concept of engraving tools with indexable carbide inserts. They offer you the ability to produce HIGH QUAITY ENGRAVING in most materials. The latest coated carbide
VSM11. WIDIA Victory Shoulder Mill 11 VSM11
WIDIA Victory Shoulder Mill 11 VSM11 Victory Shoulder Mill 11 is a high-performance, versatile, robust, 90 square shoulder milling platform. VSM11 is designed for versatility, low horsepower consumption,
Design for machining
Design for machining Machining processes are material removal processes which are a family of shaping operation in which excess or undesired material is removed from the work piece finally remaining with
T360. Holders and Inserts - T-Cap. Features T333. Holders T335. Inserts T336. Clamping units T337. Sleeves for clamping units T338.
T358 T329 Holders and Inserts - T-Cap Features Holders Inserts Clamping units Sleeves for clamping units T-CAP Kits T333 T335 T336 T337 T338 T339 User Guide Comparison test results Surface finish Tool
FMA 2000 / 5 FMA 63 / 5 FM 1000 / FM 25 / Copy Milling Program Tool Contents. Milling Cutters Identification System Arbor
Copy Milling Program Tool Contents FM Style 1 Toroid Cylindrical End Milling Cutter 42/43 FM Style 2 Toroid Taper End Milling Cutter 42/43 FMA Arbor Style Milling Cutter 42/43 Insert ata 44/45 Cutting
No Super Excellent MINI ASM Type. Introducing new JP/JM coating JP4005. Ultra-high efficiency JM4060 NEW PRODUCT NEWS. Small tool diameter,
NEW PRODUCT NEWS No.0 Patent Pending Super Excellent INI AS Type Grade for processing high-hardness materials Grade for processing stainless-steel materials Introducing new JP/J coating Small tool diameter,
Z - Star SERIES
Z - Star SEIES 2011-2012 I N C H Designed to machine high hardened materials up to Hc 70. Suitable for dry cutting & high speed cutting due to newly developed raw-material and new coating. Excellent workpiece
Shrink Fit System... Thermal Induction
Shrink Fit System... Thermal Induction process-controlled heating no overheating on the tool quick and accurate shrinking, on and off for tools with carbide or steel shanks slim design of the chucks through
PROMO PRICING EXPIRES MAY 31ST, 2018
PROMO PRICING EXPIRES MAY 31ST, 2018 Available From: Specifications are subject to change without notice. No responsibility for errors and/or printing errors will be accepted. High Feed HF Milling Program
STYLE CY/SFCY STYLE TA/SFTA
STYLE CY/SFCY 2 STYLE TA/SFTA 2 6. Tool Size Ø Shank Ø Neck Ø Neck Length Total Length Use with Insert Insert Ordering No. 2 Insert Style Screw Torx Key TAV 0250-3.75-0500 1/4 1/2.225 1 1/4 3 3/4 MS 06N
Industrial Drill Chucks with Key. For Stationary Machines and Portable Drilling Machines. Diameter (mm)
Drilling Industrial Drill Chucks with Key For Stationary Machines and Portable Drilling Machines Specifically designed for stationary drilling, turning, milling and wood working machines The one-piece
R8 Tool Holders MADE IN EUROPE
R8 Tool Holders MADE IN EUROPE TMX R8 HOLDERS AND KNEE MILLS the perfect pairing of reliability and tradition Image courtesy of the Hardinge Group Though developed in 1936, the knee mill has made a recent
DRA DRA. MagicDrill. High Efficiency Modular Drill. Excellent hole accuracy with a low cutting force design. High Efficiency Modular Drill
High Efficiency Modular Drill High Efficiency Modular Drill MagicDrill DRA Excellent hole accuracy with a low cutting force design Optimal web thickness limits deflection Fine chip breaking and smooth
FMA 2000 / 5 FMA 63 / 5 FM 1000 / FM 25 / Copy Milling Program Tool Contents. Milling Cutters Identification System Arbor
Copy Milling Program Tool Contents FM Style 1 Toroid Cylindrical End Milling Cutter 38/39 FM Style 2 Toroid Taper End Milling Cutter 38/39 FMA Arbor Style Milling Cutter 38/39 Insert ata 40/41 Cutting
Kr:90 o Face milling. Step shoulder. A-type coupling. C-type coupling. Stock Basic dimensions(mm) Number of teeth R L ØD ød L apmax Z
Milling Milling Tools Face Kr:90 o Face milling Step shoulder FMP01 A-type coupling -type coupling ap ap C-type coupling D-type coupling ap ap Stock asic dimensions(mm) Number of teeth R L ØD ød L apmax
APKT 2016 F-Line or T-Line Style
RI F-Line or -Line tyle Introducing F-Line/-Line series. he very same chneider quality for different purposes! With the new eries catalog, chneider introduces different styles for its tools: F-Line and
SHEAR IT. CLEAR IT. STREAKERS END MILLS M2 SERIES FRACTIONAL CATALOG. Put aluminum in its place.
SHEAR IT. CLEAR IT. STREAKERS END MILLS M2 SERIES FRACTIONAL CATALOG Put aluminum in its place. CONTENTS: 4 STREAKERS M2 Features IMCO s unique design makes the entire STREAKERS M2 Series first-rate roughers
Carbide Reamers...P18. Ejector Pin Counter Bores...P17
P1 Carbide Reamers...P18 Ejector Pin Counter Bores...P17 Extended Reach 2 Flute End Mills (For Machining Aluminum) Ball Nose...P15 Square End...P16 Extended Reach 4 Flute Coated End Mills Ball Nose...P11
Turning. MECH Dr Ghassan Al-Kindi - Lecture 10 1
Turning Single point cutting tool removes material from a rotating workpiece to generate a cylinder Performed on a machine tool called a lathe Variations of turning performed on a lathe: Facing Contour
Optimized flute design Better chip evacuation. Carbide substrate Higher heat resistance, higher speed.
Thread Mills Available for the first time, our solid thread mills are designed to be the highest quality thread milling solution. WIDIA-GTD Cut up to 63 HRC. Improved overall thread quality. Optimized
Indexable Engraving 45 / 60 A Revolutionary New Concept Engraving Tools with Indexable Carbide Inserts THE ACCURATE & ADVANTAGED SOLUTION www.jic-tools.com.tw 2011-06 1 indexable engraving Tool Our innovative
Spotlight.
Spotlight www.vargus.com Professional Threading Solutions Expanded Line of Thread Turning Solutions for the Oil and Gas Industry Solutions for Rotary Drill Stem Connections Unique insert design with strengthened
PROMOTIONS2016. Machining Intelligently. Self. ISCAR's Winning Edge Machining Innovations. ISCAR ENDUSERS
PROMOTIONS2016 ENDUSERS ISCAR's Winning Edge Machining Innovations Self Excellent Cylindricity and Superb Surface Finish! New Cutters Carrying Square Single-Sided Inserts Endmills with Indexable Solid
CARBIDE END MILLS SPECIFICATIONS
SPECIFICATIONS COATING GUIDE Material Hardness TiN TiCN TiALN Austentic Stainless Steel < 35 HRc * X Martinistic Stainless Steel < 35 HRc * X Martinistic Stainless Steel >= 35 HRc X PH Stainless Steel
DEAL. Victory Shoulder Mill Series Starter KITS: VSM11 and VSM17 Cutter with 10 Inserts, Starter KITS. VSM490 Cutter with 20 Inserts
Victory Shoulder Mill Series Starter KITS: VSM11 and VSM17 Cutter with 10 Inserts, DEAL VSM490 Cutter with 20 Inserts The Victory Shoulder Mill Series is a high-performance, versatile, robust, 90 square
SINGLE POINT TOOLS. Mini Boring Bars Mini Boring Bars come in a range of diameters from to inch. They are fluted for maximum strength.
SINGLE POINT TOOLS All single point tools are designed for internal machining on a lathe. The helical boring bars can be used for both lathe and mill applications. All cutting tools are made from premium
TOOLS NEWS B218G. Hydro-Clamp Type Valve Finisher HVF. New Product. Series. Drastically shortened time and reduced costs!
TOOLS NEWS Hydro-Clamp Type Valve Finisher HVF Series B218G New Product Drastically shortened time and reduced costs! Cooperated with Hydro-Clamp Type Valve Finisher HVF Series Greatly Reduced Costs The
EMP01. Indexable Milling Tools. Square shoulder milling tools B 88. Kr:90 o. Specification of tools. Spare parts. EMP01 Straight shank.
Milling Tools Kr:90 o Step shoulder Slot milling Ramp milling Helical machining Plunge milling EMP01 Straight shank Specification of tools EMP01 Straight shank Stock Basic dimensions(mm) ØD ød L L1 apmax
NPA. Expansion of the HM390 Triangular Inserts Line with Tools Carrying 5 mm Edged Inserts. New Product Announcement. Page 1 / 9
NPA Expansion of the HM390 Triangular Inserts Line with Tools Carrying 5 mm Edged Inserts Page 1 / 9 Page 2 / 9 Highlights Tools carrying triangular inserts with 5 mm helical cutting edges Effective and
Pro-X Mill. Milling Tool for High Quality Aluminum Machining. Clamping system for high speed. Chip breaker 3-dimensional design for low cutting load
Pro-X Mill Milling Tool for High Quality Aluminum Machining Clamping system for high speed Strong clamping due to the concave design of insert bottom Chip breaker 3-dimensional design for low cutting load
Optimum tool for finish machining
Series Expansion Indexable Ball-nose End Mill for Finishing Indexable Corner Radius End Mill for Finishing 2011.2 Update B065E SRF/SRB SUF High accuracy indexable end mill Optimum tool for finish machining
Lower Spindle Power Consumptionn
ower Spindle Power Consumptionn > Five cutters for drilling Ø13~Ø50 mm. > One insert for all kind of materials. > The drilling is done by helical interpolation. (circular ramping milling) Nine9 NC Helix
Plus Our NEW Quick Delivery Step Drill Program
LE ADING SOLUTIONS FOR CHAMFERED / THRE ADED HOLES Plus Our Quick Delivery Step Drill Program CHAMFERED / THREADED HOLE SOLUTIONS From standard stocked tools to our Quick Delivery Program a full range
NO NEED TO CHOOSE NINE9 DOES IT ALL!
NO NEED TO CHOOSE NINE9 DOES IT ALL! Cat. No. 11.a NC Spot Drills Corner Rounding Cutters & Engraving Tools Various applications of NC Spot Drill We Focus: Higher efficiency Position accuracy Long tool
3AFK 3AFK. For Aluminum Machining. 3-Flute End Mill for High Efficiency and Precision. Solid End Mill
Solid End Mill For Machining 3-Flute End Mill for High Efficiency and Precision High Efficiency with 3-Flutes. Excellent Precision Machining Stable Machining due to sharp edge for Anti-chattering Performance
Premium Carbide Cutting Tools
Volume 3 Premium Carbide Cutting Tools Made in the USA Proud Products of Sharp Cutter Grinding Co., LLC Sharp Cutter Grinding Company was founded in April 1984 by James V. Loftus along with his wife Karen,
Threading -Hand Taps -Button Dies -Die Nuts -Screw Extractors -Holders -Sets
THREADING Threading -Hand Taps -Button Dies -Die Nuts -Screw Extractors -Holders -Sets Threading Index Hand Taps - Carded Metric Coarse UNF BSW 93 93 93 Hand Taps - Bulk Metric Coarse Metric Fine Metric
New Standard Line for Heavy Duty Applications with Extra Large Pitches up to 24mm or 1tpi
www.vargus.com For Extra Large Pitches New Standard Line for Heavy Duty Applications with Extra Large Pitches up to 24mm or 1tpi Offering a wide range of profiles for internal and external applications:
HSS ENDMILLS Endmills Cost effective machining
Endmills Cost effective machining - olutions for slotting, finishing, roughing & profiling - 8% Co & grades of - Various shank styles to suit your needs - hort & Long eries - General purpose & application
323 and 365 Series SmoothFlute Variable Helix End Mills
323 and 365 Series SmoothFlute Variable Helix End Mills 323-365 High Speed Machining / HSM as well as traditional milling. Designed for advanced tool path software. Variable Helix where the helix changes
M-FOUR (MEW) 90 Milling with Double-sided 4-edge Inserts. Low Cutting Forces with Chatter Resistance for Excellent Surface Finish
M-FOUR (MEW) 9 Milling with Double-sided 4-edge Low Cutting Forces with Chatter Resistance for Excellent urface Finish Economical 4-edge Insert MEWH Helical End Mill Added Improved Toolholder Durability
AXD TOOLS NEWS. Multi functional milling cutter for high speed & performance machining of aluminum and titanium alloys. B116E
TOOLS NEWS For Machining of Aluminium and Titanium Alloys AXD 2014.01 Update B116E Multi functional milling cutter for high speed & performance machining of aluminum and titanium alloys. For Machining
PRODUCT INFORMATION CBN-SXR CBN-LN-SXR CBN-SXB CBN-LN-SXB. CBN End Mill Series
PRODUCT INFORMATION CBN-LN-SXR CBN-LN-SXB CBN End Mill Series The helical flutes are changing the CBN end mills! Highly Appealing OSG CBN End Mill Series Are you bothered by these issues? The work material
NEW. MILLLINE High Speed Milling Cutter. Exceptional productivity for aluminum and non-ferrous machining. Keeping the Customer First
Keeping the Customer First Tungaloy Report No. 429-US MILLLINE High Speed Milling Cutter NEW Exceptional productivity for aluminum and non-ferrous machining NEW CHIPBREAKER Outstanding productivity in
UPDATED. PCD & CBN Tangential Milling. Features:
Diameters Metric: 5.0 mm 50 mm Inch:.0 0.0 Bodies Cylindrical Shell Type Integral on request UPDATED PCD & CBN Tangential Milling TEDIFEED is the newest line of mill with tangential inserts available with
How to choose your turning tool
GNRAL TURNING General Turning GNRAL TURNING How to choose your turning tool How to choose your turning tool 1 Overview of tooling alternatives Choose Coromant Capto or shank tool, depending on clamping
HYDRAULIC UNIVERSAL AND TOOL GRINDING MACHINE. a quality product built for sustained accuracy lasting performance
D HYDRAULIC UNIVERSAL AND TOOL GRINDING MACHINE a quality product built for sustained accuracy lasting performance MANEX HYDRAULIC UNIVERSAL AND TOOL GRINDING MACHINES Mod. No. 1 - No. - No. 3 Standardized
Insert Inch Overview. Insert Overview
Insert Overview The Inserts Millstar inserts are fully ground precision inserts for better chip control, faster metal removal and higher surface accuracies. They are far more accurate than pressed and
ACCESSORIES.
Rotary, Dividing, & Cross Tables 166 Indexes 167 Dividing Heads 168 Screw Jack Sets 168 Angle Plates & V-Blocks 169 Quick Change Tool Posts & 170-171 CNC Tool Holder Bushings 171 Lathe Chucks 172-177 www.sowatool.com
HIGH-PERFORMANCE, HIGH-PRECISION HOLEMAKING TOOLS SECO FEEDMAX -P & PERFOMAX
HIGH-PERFORMANCE, HIGH-PRECISION HOLEMAKING TOOLS SECO FEEDMAX -P & PERFOMAX HARNESS THE POWER OF SECO HOLEMAKING GAIN THE TOOLS AND EXPERTISE TO OPTIMIZE PRODUCTIVITY WHAT YOU NEED TO BE YOUR BEST FEEDMAX
MILLING OF T-SLOTS. Excellent removal of chips, flushed by through coolant supply. In the UNITED STATES call us toll free HORN
MILLIN OF T-SLOTS Excellent removal of chips, flushed by through coolant supply. 1 MILLIN OF T-SLOTS MILLIN SHANK MU311.669 Material of shank: Carbide - iving a good vibration resistance for use with Insert
Seco NewS Summary
Seco NewS Summary 2014-1 2 overcoming your challenges At Seco, every action we take is calculated to overcome the challenges you face today and will face tomorrow. Our global team partners closely with
cutter NEW! back burr & path ü Uniform edge shape ü Faster operating time ü Longer tool life 1
R Deburring Technologies, LLC back burr cutter & path NEW! ü Uniform edge shape ü Faster operating time ü Longer tool life 1.800.306.5901 1 P Applicable Areas Four edges processed in one approach Up to
HSS ENDMILLS Endmills Cost effective machining
Endmills Cost effective machining - olutions for slotting, finishing, roughing & profiling - Various shank styles to suit your needs - hort & Long eries - General purpose & application specific geometries
TRAINING MANUAL. Part 3 REAMERS
PRESTO INTERNATIONAL UK LTD TRAINING MANUAL Part 3 REAMERS 1 Purpose of Reamers REAMERS A reamer produces an accurate and highly finished round hole to a much finer tolerance than that produced by a drill.
PROMOTIONS2016. Machining Intelligently. Self. ISCAR's Winning Edge Machining Innovations. ISCAR ENDUSERS
PROMOTIONS2016 ENDUSERS ISCAR's Winning Edge Machining Innovations Self Excellent Cylindricity and Superb Surface Finish! New Cutters Carrying Square Single-Sided Inserts Endmills with Indexable Solid
CoroMill. All solutions at a glance
CoroMill All solutions at a glance CoroMill Product overview Milling grades according to groups Shoulder milling CoroMill 316 CoroMill 490 CoroMill 790 Long edge cutter Insert size Max. cutting depth a
High Performance Variable Helix Fractional and Metric
High Performance Variable Helix Fractional and Metric ctured in the U. ufa S. an Di st be A. M rib uted A ro u n d t h e ISO 9001:2015 CERTIFIED Gl o Chatter Free Parts Faster Feed Rates Longer Tool Life
地址 : 中国湖南株洲市天元区黄河南路 Address: Huanghe Southern Road, Tianyuan Zone,Zhuzhou, Hunan Province, China 邮编 (Postcode): 电话 (Tel):
地址 : 中国湖南株洲市天元区黄河南路 Address: Huanghe Southern Road, Tianyuan Zone,Zhuzhou, Hunan Province, China 邮编 (Postcode): 412007 电话 (Tel): 0731-22882430 22889474 22889477 22889468 22887814 22880853 22882725 22882431
Application and Technical Information Thread Milling System (TMS) Minimum Bore Diameters for Thread Milling
Inserts Application and Technical Information Minimum Bore iameters for Thread Milling UN-ISO-BSW tpi 48 3 4 0 16 1 10 8 7 6 5 4.5 4 Technical ata Accessories Vintage Cutters Widia Cutters Thread Milling
CUTTING TOOLS FROM SANDVIK COROMANT. Small part machining TURNING PARTING AND GROOVING THREADING MILLING DRILLING
CUTTING TOOLS FROM SANDVIK COROMANT Small part machining TURNING PARTING AND GROOVING THREADING MILLING DRILLING Table of contents Introduction 2 Sliding head machines 4 Ordering information 55 Application
Jet-Stream Modular Carbide & Steel Boring Bar Instructions Manual
Workpiece Rigidity 1 Work holding Use the proper chuck and jaws to hold the work-piece, to assure that the part is held with maximum rigidity and stability under cutting force. 2 Steady Rest Support When
CUTTING TOOLS FROM SANDVIK COROMANT. Small part machining TURNING PARTING AND GROOVING THREADING MILLING DRILLING
CUTTING TOOLS FROM SANDVIK COROMANT Small part machining TURNING PARTING AND GROOVING THREADING MILLING DRILLING Table of contents Introduction 2 Sliding head machines 4 Ordering information 55 Application
PRODUCT NEWS PFC/MPF NEW PRODUCT. No. 303 DIJET INDUSTRIAL CO., LTD. Ø 50, Ø 63, Ø 80: 6 Items. Ø 30, Ø33, Ø 40: 3 Items. Face Mill type.
PRODUCT NEWS No. 303 NEW PRODUCT Face Mill type PFC/MPF Ø, Ø 63, Ø 80: 6 Items Heads type Ø 30, Ø33, Ø 40: 3 Items Up & Down From semi-finishing to super finishing on slide seat surface. High speed up
DIE & MOLD MACHINING TOOL SOLUTIONS FOR INDUSTRIES DM18 HEAD OFFICE
DM18 DIE & MOLD MACHINING TOOL SOLUTIONS FOR INDUSTRIES HEAD OFFICE 211, Sewolcheon-ro, Bupyeong-gu, Incheon, South Korea Phone : +82-32-526-0909 E-mail : yg1@yg1.kr www.yg1.kr Note The new address above
APRIL 2009 / NEW-100 / PAGE 1 OF 13
APRIL 2009 / NEW-100 / PAGE 1 OF 13 The standard UNIDEX line covers reaming applications from 5/16 to 1 1/4 diameter. The single indexable blade and high wear resistant carbide or cermet pads provide a
Increases the feed rate up to. 400% using 4 inserts! Compared with competitor's cutter. The Ultra High Feed Chamfer Mill
The Ultra High eed Chamfer Mill CATAOG No. - ong Type Hexagon Increases the feed rate up to 00% using inserts! Compared with competitor's cutter Eccentric Design for Tapped Holes New series exclusively
Cost reduction Cost reduction Cost reduction
Cost reduction Quality, performance, value - Guaranteed! Work-Piece Cutting Speed vc(sfm) ISO Material Hardness (HB) Hardness (HRC) PC5300 PC5400 P Carbon steel C = 0.10-0.35% 80~180 10~ 459~886 328~820
Milling. CPMill ball track milling cutters. Easy handling and high precision NEW
Milling CPMill ball track milling cutters Easy handling and high precision NEW CPMill - Complete Performance Milling The new generation of MAPAL replaceable milling cutters for the machining of constant-velocity
VSM11. WIDIA Victory Shoulder Mill 11 VSM11
Victory Shoulder Mill 11 ADVANCES 2015 WIDIA Victory Shoulder Mill 11 VSM11 Victory Shoulder Mill 11 is a high-performance, versatile, robust, 90 square shoulder milling platform. VSM11 is designed for