Pipe clamps, ancillary equipment 1. Sliding supports 2. Clamp systems 3. Roller bearings 4. Pre-insulated pipe supports 5.
|
|
- Kory Stafford
- 6 years ago
- Views:
Transcription
1 Catalogue 9 English
2 Overview catalogue no. Pipe clamps, ancillary equipment 1 Sliding supports 2 Clamp systems 3 Roller bearings 4 Pre-insulated pipe supports 5 ModularSystems 6 ModularSteel ModularSteel 80 8 ModularSupport 9 2
3 Table of contents page ModularSupport Hight-adjustable sliding supports DN 15 - DN 800 Hight adjustable pipe support DN 20 - DN 150 U-Bolt support for ModularSteel DN 15 - DN 175 Stainless steel U-Bolt support for ModularSteel DN 15 - DN Beam hangers for ModularSteel Clamp system for ModularSteel Examples M12 - M
4 Height / Type h min [mm] h max [mm] Hight-adjustable sliding supports, Type GLVA DN 15 - DN 80 Material: S235JR DIN EN 10025, for temperatures up to 300 C Finish: hot-dip galvanized complete with bolts and nuts 8.8 / 8 hot-dip galvanized Article no. DN ø adjustable adjustable loads [kn] weight pipe BOP MOP at 80 C [kg] [mm] [mm] F X F Y F Z GLVA-022/1-R-B , ,8 GLVA-027/1-R-B , ,9 GLVA-034/1-R-B , ,9 GLVA-043/1-R-B , ,9 GLVA-049/1-R-B , ,9 GLVA-061/1-R-B , ,2 GLVA-077/1-R-B , ,4 GLVA-089/1-R-B , ,4 on request 4
5 Height / Type h min [mm] h max [mm] Hight-adjustable sliding supports, Type GLVB DN 50 - DN 300 Material: S235JR DIN EN 10025, for temperatures up to 300 C Finish: hot-dip galvanized complete with bolts and nuts 8.8 / 8 hot-dip galvanized Article no. DN ø adjustable adjustable loads [kn] weight pipe BOP MOP at 80 C [kg] [mm] [mm] F X F Y F Z GLVB-061/1-R-B , ,7 0,5 9,1 5,3 GLVB-077/1-R-B , ,9 0,7 9,7 5,5 GLVB-089/1-R-B , ,8 0,8 9,3 5,7 GLVB-115/1-R-B , ,7 1,5 15,6 7,7 GLVB-140/1-R-B , ,6 1,7 15,5 8,1 GLVB-169/1-R-B , ,8 2,0 16,0 8,6 GLVB-220/1-R-B , ,8 2,3 15,9 9,7 GLVB-273/1-R-B , ,9 2,6 16,3 12,7 GLVB-324/1-R-B , ,0 2,9 16,7 13,9 GLVB-061/2-R-B , ,7 0,4 9,1 6,3 GLVB-077/2-R-B , ,9 0,5 9,7 6,5 GLVB-089/2-R-B , ,8 0,6 9,3 6,7 GLVB-115/2-R-B , ,7 1,1 15,6 8,7 GLVB-140/2-R-B , ,6 1,3 15,5 9,1 GLVB-169/2-R-B , ,8 1,5 16,0 9,6 GLVB-220/2-R-B , ,8 1,8 15,9 10,7 GLVB-273/2-R-B , ,6 2,1 16,3 13,7 GLVB-324/2-R-B , ,4 2,2 16,7 14,8 GLVB-061/3-R-B , ,7 0,3 9,1 7,1 GLVB-077/3-R-B , ,9 0,4 9,7 7,3 GLVB-089/3-R-B , ,8 0,5 9,3 7,5 GLVB-115/3-R-B , ,7 0,9 15,6 9,5 GLVB-140/3-R-B , ,6 1,1 15,5 9,9 GLVB-169/3-R-B , ,6 1,3 16,0 10,4 GLVB-220/3-R-B , ,2 1,5 15,9 11,5 GLVB-273/3-R-B , ,0 1,7 16,3 14,5 GLVB-324/3-R-B , ,8 1,7 16,7 15,6 5
6 Height / Type h min [mm] h max [mm] Hight-adjustable sliding supports, Type GLVC DN DN 800 Material: S235JR DIN EN 10025, for temperatures up to 300 C Finish: hot-dip galvanized complete with bolts and nuts 8.8 / 8 hot-dip galvanized Article no. DN ø width adjustable adjustable loads [kn] weight pipe BOP MOP at 80 C [kg] B [mm] [mm] F X F Y F Z GLVC-273/1-R-B , ,9 2,6 16,3 22,5 GLVC-324/1-R-B , ,0 2,9 16,7 23,5 GLVC-356/1-R-B , ,6 2,9 16,3 24,9 GLVC-407/1-R-B , ,1 4,7 24,7 33,3 GLVC-457/1-R-B , ,6 4,8 24,2 34,6 GLVC-508/1-R-B , ,3 5,0 24,7 36,6 GLVC-609/1-R-B , ,9 4,5 20,9 40,0 GLVC-711/1-R-B , ,8 5,0 22,4 43,6 GLVC-812/1-R-B , ,5 5,3 22,8 47,0 GLVC-273/2-R-B , ,4 2,1 16,3 24,3 GLVC-324/2-R-B , ,2 2,4 16,7 25,5 GLVC-356/2-R-B , ,9 2,4 16,3 26,7 GLVC-407/2-R-B , ,2 3,9 24,7 34,9 GLVC-457/2-R-B , ,7 4,1 24,2 36,2 GLVC-508/2-R-B , ,5 4,3 24,7 38,4 GLVC-609/2-R-B , ,5 3,9 20,9 41,8 GLVC-711/2-R-B , ,4 4,5 22,4 45,4 GLVC-812/2-R-B , ,1 4,7 22,8 48,8 GLVC-273/3-R-B , ,8 1,8 16,3 31,3 GLVC-324/3-R-B , ,6 2,1 16,7 32,5 GLVC-356/3-R-B , ,4 2,1 16,3 33,7 GLVC-407/3-R-B , ,6 3,5 24,7 42,9 GLVC-457/3-R-B , ,2 3,6 24,2 44,2 GLVC-508/3-R-B , ,1 3,9 24,7 46,4 GLVC-609/3-R-B , ,1 3,6 20,9 49,8 GLVC-711/3-R-B , ,1 4,1 22,4 53,4 GLVC-812/3-R-B , ,9 4,4 22,8 56,8 6
7 Hight-adjustable pipe support Material: S235JR DIN EN 10025, Finish: hot-dip galvanized, complete with screw fastening and rubber inlay The rubber inlay is oil- and ozone-resistant, saltwater-proof as well as free of halogen Temperatures of rubber inlay from -30 C / +110 C Type RGS M16 for ModularSteel 120 DN 20 - DN 150 Article no. DA pipe clamp rubber inlay D1 weight [mm] B1 x S1 x L [kg] RGS-027-M16x100-R-F x 5 30 x 4 x 48 M16 0,6 RGS-034-M16x100-R-F x 5 30 x 4 x 55 M16 0,6 RGS-043-M16x100-R-F x 6 40 x 6 x 66 M16 0,9 RGS-049-M16x100-R-F x 6 40 x 6 x 76 M16 0,9 RGS-061-M16x100-R-F x 6 40 x 6 x 95 M16 1,0 RGS-077-M16x100-R-F x 6 40 x 6 x 120 M16 1,1 RGS-089-M16x100-R-F x 8 50 x 8 x 140 M16 2,1 RGS-115-M16x100-R-F x 8 50 x 8 x 179 M16 2,2 RGS-169-M16x100-R-F x 8 50 x 8 x 264 M16 2,8 Type RGS M12 for ModularSteel 80 DN 20 - DN 150 Article no. DA pipe clamp rubber inlay D1 weight [mm] B1 x S1 x L [kg] RGS-027-M12x100-R-F x 5 30 x 4 x 48 M12 0,5 RGS-034-M12x100-R-F x 5 30 x 4 x 55 M12 0,5 RGS-043-M12x100-R-F x 6 40 x 6 x 66 M12 0,8 RGS-049-M12x100-R-F x 6 40 x 6 x 76 M12 0,8 RGS-061-M12x100-R-F x 6 40 x 6 x 95 M12 0,9 RGS-077-M12x100-R-F x 6 40 x 6 x 120 M12 1,0 RGS-089-M12x100-R-F x 8 50 x 8 x 140 M12 2,0 RGS-115-M12x100-R-F x 8 50 x 8 x 179 M12 2,1 RGS-169-M12x100-R-F x 8 50 x 8 x 264 M12 2,7 7
8 Anchors and sliding supports for non-insulated pipes with infinitely lateral adjustment Material: S235JR, hot-dip galvanized Joining profile: ModularSteel 120 or ModularSteel 80 U-Bolt support for ModularSteel 120 DN 15 - DN 175 Article no. Article no. for pipes DN L B weight anchors sliding supports with max. bore [kg] STB-RSBZ-022-R-F STB-RSBLZ-022-R-F - 21, ,66 STB-RSBZ-027-R-F STB-RSBLZ-027-R-F 25,0-26, ,67 STB-RSBZ-034-R-F STB-RSBLZ-034-R-F 30,0-33, ,69 STB-RSBZ-043-R-F STB-RSBLZ-043-R-F 38,0-42, ,70 STB-RSBZ-049-R-F STB-RSBLZ-049-R-F 44,5-48, ,70 STB-RSBZ-061-R-F STB-RSBLZ-061-R-F 57,0-60, ,97 STB-RSBZ-077-R-F STB-RSBLZ-077-R-F 70,0-76, ,00 STB-RSBZ-089-R-F STB-RSBLZ-089-R-F 84,0-88, ,03 STB-RSBZ-115-R-F STB-RSBLZ-115-R-F 101,6-114, ,56 STB-RSBZ-140-R-F STB-RSBLZ-140-R-F 133,0-139, ,63 STB-RSBZ-169-R-F STB-RSBLZ-169-R-F 159,0-168, ,72 STB-RSBZ-194-R-F STB-RSBLZ-194-R-F - 193, ,82 U-Bolt support for ModularSteel 80 DN 15 - DN 175 Article no. Article no. for pipes DN L B weight anchors sliding supports with max. bore [kg] STL-RSBZ-022-R-F STL-RSBLZ-022-R-F - 21, ,63 STL-RSBZ-027-R-F STL-RSBLZ-027-R-F 25,0-26, ,64 STL-RSBZ-034-R-F STL-RSBLZ-034-R-F 30,0-33, ,66 STL-RSBZ-043-R-F STL-RSBLZ-043-R-F 38,0-42, ,67 STL-RSBZ-049-R-F STL-RSBLZ-049-R-F 44,5-48, ,68 STL-RSBZ-061-R-F STL-RSBLZ-061-R-F 57,0-60, ,94 STL-RSBZ-077-R-F STL-RSBLZ-077-R-F 70,0-76, ,97 STL-RSBZ-089-R-F STL-RSBLZ-089-R-F 84,0-88, ,00 STL-RSBZ-115-R-F STL-RSBLZ-115-R-F 101,6-114, ,47 STL-RSBZ-140-R-F STL-RSBLZ-140-R-F 133,0-139, ,54 STL-RSBZ-169-R-F STL-RSBLZ-169-R-F 159,0-168, ,63 STL-RSBZ-194-R-F STL-RSBLZ-194-R-F - 193, ,73 8
9 Anchors and sliding supports for non-insulated pipes with infinitely lateral adjustment Material: Z-Profile: S235JR, hot-dip galvanized U-Bolt / Plate: PA 2 mm Joining profile: ModularSteel 120 or ModularSteel 80 Stainless steel U-Bolt support for ModularSteel 120 DN 15 - DN 175 Article no. Article no. for pipes DN L B weight anchors sliding supports with max. bore [kg] STB-RSBZ-022-RF-V STB-RSBLZ-022-RF-V - 21, ,68 STB-RSBZ-027-RF-V STB-RSBLZ-027-RF-V 25,0-26, ,69 STB-RSBZ-034-RF-V STB-RSBLZ-034-RF-V 30,0-33, ,71 STB-RSBZ-043-RF-V STB-RSBLZ-043-RF-V 38,0-42, ,72 STB-RSBZ-049-RF-V STB-RSBLZ-049-RF-V 44,5-48, ,73 STB-RSBZ-061-RF-V STB-RSBLZ-061-RF-V 57,0-60, ,00 STB-RSBZ-077-RF-V STB-RSBLZ-077-RF-V 70,0-76, ,03 STB-RSBZ-089-RF-V STB-RSBLZ-089-RF-V 84,0-88, ,06 STB-RSBZ-115-RF-V STB-RSBLZ-115-RF-V 101,6-114, ,61 STB-RSBZ-140-RF-V STB-RSBLZ-140-RF-V 133,0-139, ,68 STB-RSBZ-169-RF-V STB-RSBLZ-169-RF-V 159,0-168, ,77 STB-RSBZ-194-RF-V STB-RSBLZ-194-RF-V - 193, ,87 Stainless steel U-Bolt support for ModularSteel 80 DN 15 - DN 175 Article no. Article no. for pipes DN L B weight anchors sliding supports with max. bore [kg] STL-RSBZ-022-RF-V STL-RSBLZ-022-RF-V - 21, ,67 STL-RSBZ-027-RF-V STL-RSBLZ-027-RF-V 25,0-26, ,68 STL-RSBZ-034-RF-V STL-RSBLZ-034-RF-V 30,0-33, ,70 STL-RSBZ-043-RF-V STL-RSBLZ-043-RF-V 38,0-42, ,71 STL-RSBZ-049-RF-V STL-RSBLZ-049-RF-V 44,5-48, ,72 STL-RSBZ-061-RF-V STL-RSBLZ-061-RF-V 57,0-60, ,97 STL-RSBZ-077-RF-V STL-RSBLZ-077-RF-V 70,0-76, ,00 STL-RSBZ-089-RF-V STL-RSBLZ-089-RF-V 84,0-88, ,03 STL-RSBZ-115-RF-V STL-RSBLZ-115-RF-V 101,6-114, ,52 STL-RSBZ-140-RF-V STL-RSBLZ-140-RF-V 133,0-139, ,59 STL-RSBZ-169-RF-V STL-RSBLZ-169-RF-V 159,0-168, ,68 STL-RSBZ-194-RF-V STL-RSBLZ-194-RF-V - 193, ,78 9
10 Beam hangers for ModularSteel 120 Hanger plate with welding lug pipe hangers Material: DIN EN Camber: M Nm Finish: hot-dip galvanized, complete with bolts and nuts Article no. DA weight [mm] [kg] STB-HP-M12-F 13 for thread rod M12 5,5 STB-HP-M16-F 17 for thread rod M16 5,5 STB-HP-M20-F 21 for thread rod M20 5,5 Beam hangers for ModularSteel 80 Hanger plate with welding lug pipe hangers Material: DIN EN Camber: M12-80 Nm Finish: hot-dip galvanized, complete with bolts and nuts Article no. DA weight [mm] [kg] STL-HP-M12-F 13 for thread rod M12 2,6 STL-HP-M16-F 17 for thread rod M16 2,6 STL-HP-M20-F 21 for thread rod M20 2,6 10
11 Clamp system type PPA for ModularSteel Profile clamp set for pipe bearings Material: S235JR, hot-dip galvanized Camber: M10-25 Nm, M12-30 Nm Joining profiles width: ModularSteel 120, TB50 Article no. joining profi le thread rod loads at 300 C weight A B C F G F z F y [kg] [mm] [mm] [kn] [kn] PPA-120/10-R-F ,0 6,0 1,0 PPA-120/12-R-F ,0 10,0 2,1 Profile clamp set for pipe bearings Material: S235JR, hot-dip galvanized Camber: M10-25 Nm Joining profiles width: ModularSteel 80, TB40 Article no. joining profi le thread rod loads at 300 C weight A B C F G F z F y [kg] [mm] [mm] [kn] [kn] PPA-080/10-R-F ,0 6,0 0,9 Ordering example: PPA-120/10-R-F PPA = Profi le clamp set with lift-off prevention, without support shoe 120 = Guide width 120 mm 10 = Diameter of thread rods -R = Material S235JR -F = Hot-dip galvanized 11
12 I II Example I ModularSteel 120 Cantilever clamped on existing steel building beam with Sliding Support Type GLVC with clamp system Type PPA Sliding Support Type GLVB with clamp system Type PPA Sliding Support Type GLVB with clamp system Type PPA Example II ModularSteel 80 Cantilever clamped on existing steel building beam with Sliding Support Type GLVC with clamp system Type PPA Sliding Support Type GLVB with clamp system Type PPA Sliding Support Type GLVB with clamp system Type PPA III Example III ModularSteel 120 with vertical connection to system beam with Sliding Support Type GLY Sliding Support Type GLW Sliding Support Type GLT 12
13 IV Example IV ModularSteel 120 screwed to system beam with U-Bolt support Type STB-RSBZ for non-insulated pipes with infi nitely lateral adjustment V Example V ModularSteel 80 with vertical connection to system beam with U-Bolt support Type STL-RSBZ for non-insulated pipes with infi nitely lateral adjustment Example VI ModularSteel 120 with vertical connection to system beam with VI Profi le clamp set for pipe bearings clamp system Type PPU Profi le clamp set for pipe bearings clamp system Type PPA Profi le clamp set with guide for pipe bearings clamp system Type PKF Profi le clamp set for pipe bearings clamp system Type PKA/T 13
14 VII Example VII ModularSteel 120 screwed to system beam with Hight-adjustable pipe support Type RGS M16 VIII Example VIII ModularSteel 80 with vertical connection to system beam with Hight-adjustable pipe support Type RGS M12 IX Example IX ModularSteel 120 with vertical connection to system beam with Clamps of other manufacturers, adjusted to ModularSteel 14
15 X Example X ModularSteel 120 screwed to system beam with Hanger plate with welding lug Type STB-HP for pipe hangers XI Example XI ModularSteel 80 with vertical connection to system beam with Hanger plate with welding lug Type STL-HP for pipe hangers 15
16 Headquarters Am Westbahnhof Gevelsberg Germany Phone Fax gevelsberg@bernecker-gmbh.com Subsidiary Ladegaststraße Merseburg Germany Phone Fax merseburg@bernecker-gmbh.com Bernecker BENELUX benelux@bernecker-gmbh.com Catalogue 9 English
beam and support solution Catalogue 6 english
6 7 www.hoseflex.com 8 beam and support solution Catalogue 6 english Overview catalogue no. Pipe clamps, ancillary equipment 1 Sliding supports 2 Clamp systems 3 Roller bearings 4 Pre-insulated pipe supports
More informationBernecker. Katalog 3 deutsch. Clamp systems. Catalogue 3 english
R Bernecker 1 2 3 4 Katalog 3 deutsch 5 Clamp sstems Catalogue 3 english Overview catalogue no. Pipe clamps, ancillar equipment 1 Sliding supports 2 Clamp sstems 3 Roller bearings 4 Pre-insulated pipe
More informationCLAMP SYSTEM
LMP SYSEM obalch ps Hejreskovvej 24 K-3490 Kvistgård enmark el.: +45 4582 0533 anske ank: 1471 488031 IN - KK: K30488031 - EUR: K4700488228 Swift code: KKK 3.5.1.1 PHL and PK N 15 - N 1 N 200 - N 0 N H
More informationINSTALLATION INSTRUCTION RRU DOUBLE LIGHT POLE MOUNT
INSTALLATION INSTRUCTION RRU Double Light Pole Mount for installation of two RRU units on mast, towers or other vertical structures. CUE DEE YOUR INNOVATIVE PARTNER 1 CONTENTS 1. PRODUCT COVERED IN THIS
More informationSimotec. 13.i
Products: Framo 80 13.0 Products: Framo 80 13.1 Products: Structural Elements 100/120 13.2 Products: Pipe Shoes 13.3 Framo 80: Beam Section and Screw 13.4 Framo 80: Cantilever Bracket and End Support STA
More informationMEFA mounting accessories
MEFA mounting accessories Mounting accessories Base plates Page 5/2 Double holder Page 5/4 Height-adjustable suspensions Page 5/5 Pendular bolt joints Page 5/6 Trapeze hanger Page 5/7 Threaded hooks, distance
More informationLeveling Feet, Base Plates and Casters
Leveling Feet, Base Plates and Casters 77 Leveling Foot 1 1 Fastening to profile end Fastening in T-slot of profile For leveling tables and light equipment. Ratchet-type height adjustment requires no tools.
More informationPUSH-PULL-PROPS. and accessories ROBUSTA-GAUKEL GMBH MOUNTING TECHNOLOGY &CO.KG
PUSH-PULL-PROPS and accessories MOUNTING TECHNOLOGY ROBUSTA-GAUKEL GMBH &CO.KG MOUNTING TECHNOLOGY PUSH-PULL-PROPS AND ACCESSORIES INDEX General information...................... 3 Push-pull-prop Type
More informationProducts for fixing to Steelwork and Decking
Products 8.0 Beam Clamp - Single Support 8.1 Universal Joint for any variable Angle Adjustment 8.2 Beam Clamp TCS for Header Rails 8.3 Beam Clip for Cross Support/ Dimensioning of Bolts 8.4 Beam Clip for
More informationFixings & Fastenings. Bright Zinc Plated, Galvanised & Stainless Steel. Lockinex. ea i, ea u i
Fixings & Fastenings Bright Zinc Plated, Galvanised & Stainless Steel Lockinex ea i, ea u i INTRODUCTION The Lockinex Range of Fixings & Fastenings are manufactured in Bright Zinc Plate, Hot dipped galvanised
More informationScaffolding ACCESSORIES
Scaffolding ACCESSORIES INITIA COMPONENTS FIXED BASE For flat surfaces. With holes in the spigot for attaching the cradle head. The reinforced base plate has a thickness of 5 mm and a surface area of 120
More informationRoof fastener. Perfectly thought out for every roof
Roof fastener Perfectly thought out for every roof 1 Welcome to the world of clever solutions Solutions for every roof In our production areas we produce all needed components for the sub construction
More informationMax. Rec. Load. Wt. Per Inch lbs. kn lbs. kn lbs. kg. Wt. Per Inch lbs. kn lbs. kn lbs. kg 750 F (399 C)
FIG. 10 FIG. 15 & 15L Function: Designed for use in pipe hanger assemblies. (Type 304 or 316 Stainless Steel upon request) Ordering: Specify figure number, rod size, length (), material, and finish. 650
More informationPSI COMPAKT SEALS AND WALL SLEEVES WITH FIXED/LOOSE FLANGE
PSI COMPAKT SEALS AND WALL SLEEVES WITH FIXED/LOOSE FLANGE IN GALVANIZED OR STAINLESS STEEL FOR BUILDINGS WITH OR WITHOUT SEALING SHEETS IN SPLIT VERSION FOR RETROFITTING WWW.PSI-PRODUCTS.COM 37 GENERAL
More informationCAM SYSTEM. Eccentric self-locking clamping devices. Set. CAM SYSTEM t. CAM SYSTEM t. Set. CAM SYSTEM s pag CAM SYSTEM s pag.
Eccentric self-locking CAM SYSEM Set CAM SYSEM t pag. 12 CAM SYSEM t pag. 126 Set CAM SYSEM s pag. 127 CAM SYSEM s pag. 128 EDGE CLAMP pag. 130 123 CAM-SYSEM eccentric self-locking he CAM SYSEM has been
More informationFASTENERS. Fasteners. Steel fasteners. Hexagon socket screws. Steel fasteners MC6S
Steel fasteners 21 FASTENERS Steel fasteners Hexagon socket s MC6S Hexagon socket head cap Din 912. (ISO 4762). * Fully threaded. 100 101 102 12.9 Uncoated 8.8 Uncoated 8.8 BZP Blanc Zink plated Dim mm
More informationTel: +44 (0)
4 Lindapter s support fixing range offers a series of ideal solutions for all building services. This includes the suspension of HVAC equipment, pipe work, fire protection/sprinkler systems, suspended
More informationPEC-TA Cast-in Channels and Bolts. Certified German quality for high-end fixing solutions. Advantages of using PEC Cast-in Channels.
Fixing Technology s and Bolts PEC Cast-in Channels are ideally suited for quick, reliable and cost-efficient fixing of different construction elements. The possibility of making simple and flexible adjustments
More informationTransmission Line Support Systems
Antenna Support Bracket for transmission line The Antenna Support Bracket angle mounts directly to a 4-1/2" (114 mm) OD antenna pipe mount or tower leg. This is ideal for supporting transmission line runs
More informationOne-sided rack, hot-dip galvanized Space between bicycles 350 mm length approx.kg Part-No. Two-sided rack, hot-dip galvanized
Bicycle rack Sturdy and space-saving due to alternating high and low racks. Racks can be bolted to form a serial system, with boreholes for anchoring or plugging. Bicycle parking rack Frame of angular
More informationSLIDING DOORS DIRECT ROLLER
SLIDING DOORS Single door fixed to wall NFK s Direct Sliding Door system, for installation to a solid wall. Height adjustable track supports can be quickly mounted to a wall allowing the glass to pass
More informationSW 16mm. SW 15mm. SW 19mm
M B-Coding Automation Technology 7 series Screw locking acc. to DIN EN 6076--0 Degree of protection IP67 Moulded versions Degree of protection IP68 Easy assembly Excellent EMC shielding Versions with shielding
More informationFabricated Structural Steelwork. Section 8
Fabricated Structural Steelwork Section 8 INDEX DESCRIPTION FIGURE No. PAGE Pipe Shoe Welded Pipe Shoe Welded (Heavy Duty) Pipe Shoe Clamped Pipe Shoe Clamped (Heavy Duty) Inverted Tee Post Upright Tee
More informationSWAY BRACE PIPE ATTACHMENT FIG. 010
Function: Designed for bracing pipe against sway and seismic disturbance. The pipe attachment component of a sway brace system used in conjunction with a PHD Manufacturing structural attachment fitting,
More informationAdjustable Feet Castors Accessories for Floor Elements
Adjustable Feet Castors Accessories for Floor Elements Products in this section Levelling Knuckle Feet Threaded spindles for infinite height adjustment Metal or plastic foot plate Knuckle Feet X Compatible
More informationM4 Hex Nut [ ] M4 T-Nut 20 [20-044] Appx. 1. 3mm. 20 Series profiles (1 per hole) (1 per hole) Ordering Information
Handles & Light Duty PA 20 1 Assembly of Hinge M4x8 FHCS [24-208-4] M4 T-Nut 20 [20-044] M4 Hex Nut [24-706-4] 60 300-0 PA 20 on panel 2 Hinge positions 3-4 Clearance dimensions 5 Range of swing FOR M4
More informationInstallation Systems. Hilti. Outperform. Outlast.
Systems Hilti. Outperform. Outlast. 446 Systems MM Channel System (galvanized) MM channels MM connectors 454-457 458-465 MQ Channel System (galvanized) MQ channels 466-469 MQ Connectors 470-480 MQ brackets
More informationPIPE/CONDUIT SUPPORTS
PIPE/CONDUIT SUPPORTS Pipe/Conduit Clamps...102-105 Unicushion... 106 Pipe & Tubing (Cush-A-Clamp ) Clamps...107-110 Pipe Hangers... 111 Pipe Rollers...111-112 Pipe Brackets... 113 Reference Tables...114-120
More informationAURORA BRAND Pipe Hangers
AURORA BRAND Pipe Hangers SCHEDULE: H-2017 EFFECTIVE: March 6 and Supports 2017 Subject to change without notice. GENERAL NOTES MINIMUM INVOICE: S: F.O.B. : PAYMENT TERMS: OTHER TERMS: ONTARIO 4151 North
More informationInstallation Systems INSTALLATION SYSTEMS
INSTALLATION SYSTEMS 230 MM Channel System MM Channel System Page 230-237 MQ Channel System MQ Channel System Page 237-248 MC Channel System MC Channel System Page 249 Accessories Beam Clamp MAB Page 249
More informationOPERATING INSTRUCTIONS 5-AXIS CLAMPING SYSTEM + ACCESSORIES
OPERATING INSTRUCTIONS 5-AXIS CLAMPING SYSTEM + ACCESSORIES 1 Contents 1. Introduction 2. Safety instructions and precautions 3 Operating the clamp 3.1 Clamp set up 3.2 Sequence for clamp set up 3.3 Adjusting
More informationInstallation Instructions TMW Antenna Tower Mount for 4ft (1.2m) Antennas.
Description The following pages show the steps required to assembly and fit the antenna mount to a vertical tower pipe of diameter 48 to 115 mm (1.9 to 4.5"). This mount provides ±20 azimuth or ±15 elevation
More informationRoller Guides C-Rail Systems Linear Guide Systems Ball-Bearing Guide Bushes Ball-bush block guides Shafts Accessories for Linear Slides
Roller Guides C-Rail Systems Linear Guide Systems Ball-Bearing Guide Bushes Ball-bush block guides Shafts Accessories for Linear Slides Application example linear systems, drives and accessories 1 2 3
More informationNON-PENETRATING ROOFTOP HANGERS AND SUPPORTS
SECTION 15062 NON-PENETRATING ROOFTOP HANGERS AND SUPPORTS For best results, display hidden notes to specifier. PART 1 GENERAL 1.1 SECTION INCLUDES A. Pipe supports. B. Conduit supports. C. Duct supports,
More informationPREASSEMBLED ELEMENTS FOR LIFTING AND SLIDING DOORS
PROFILE SYSTEM PRE-ASSEMBLED ELEMENTS FOR LIFTING AND SLIDING DOORS s r ood gni d i l s dna gni t f i l r o f s t neme l e de l bme s s a - er P PREASSEMBLED ELEMENTS FOR LIFTING AND SLIDING DOORS MINITEC
More informationAURORA BRAND Pipe Hangers and Supports
AURORA BRAND Pipe Hangers and Supports SCHEDULE: H-2015-1 EFFECTIVE: November 15 2015 Subject to change without notice. GENERAL NOTES MINIMUM INVOICE: S: F.O.B. : PAYMENT TERMS: OTHER TERMS: ONTARIO 4151
More informationFEET, WHEELS, FLOOR FASTENINGS, SUPPORTS
SYSTEM COMPONENTS FEET, WHEELS, FLOOR FASTENINGS, SUPPORTS s t r oppu S, s gn i n e t s af r oo l F, s l eehw, t e ef FEET, WHEELS, FLOOR FASTENINGS, SUPPORTS 136 MINITEC PROFILE SYSTEM BASE AND TRANSPORT
More informationRoof-Top Applications
Roof-Top Non-Penetrating Flat Roof Mounts Pre galvanized mast, base and Rubber Mat Designed for DSS support 103489 103490 103491 103492 103493 FRM Non-Penetrating Roof Mount (1.25" O.D. Tubing, 60" Overall
More informationCopper Tubing Hangers Clevis Hangers. Copper Tubing Hangers
Copper Tubing Hangers Clevis Hangers Copper Tubing Hangers Fig. CT-69 Adjustable Swivel Rug Fig. CT-138R Fig. CT-65 Fig. CT-109 Extension Split Light Weight Adjustable Clevis Fig. CT-99 & CT-99C Split
More informationUnit4 31. UnitS 39. Unit 6 47
Preface..................... xi About the Author......... xiii Acknowledgments... xiv Unit 1 1 Bases for Interpreting Drawings........ I Visible Lines............. 3 Lettering on Drawings... 3 Sketching...
More informationClamp Pair. Bore Diameter (mm) Clamp Material PP = Polypropylene PA = Polyamide PE = Polyethylene AL = Aluminum
DIN 0 CLAMPS Clamp Pairs HRL = Standard Duty (Ribbed Profile) HRGL = Standard Duty (Smooth Profile) HRS = Heavy Duty (Ribbed Profile) HRGS = Heavy Duty (Smooth Profile) Clamp Pair ore Diameter (mm) Clamp
More information6.1. PUSH-PULL-PROPS and accessories
6 6.1. PUSH-PULL-PROPS and accessories MOUNTING TECHNOLOGY 6 GENERAL INFORMATION PUSH-PULL-PROPS AND ACCESSORIES INDEX General information....................... 3 Push-pull-props Type R.....................
More information5-AXIS MACHINING SCS QUINTUS WWW. WORKHOLDINGSOLUTIONSGROUP. COM
WORKHOLDING SOLUTIONS FOR -AXIS MACHINING SCS MC QUINTUS ONE system / MANY solutions WWW. WORKHOLDINGSOLUTIONSGROUP. COM MCCLAMPING S YSTEM for -axis machining MC + Quintus... MC Clamping System Free access
More informationTest Joints / Fixed Earthing Terminals
Test Joints / Fixed Earthing Terminals Partially isolated lead-in earthing rod Test joint with disconnecting sleeve Fixed earthing terminal with ring equipotential bonding 131 Disconnecting Sleeves FIXED
More informationB3199R - Ceiling Flange B3199RCT - Ceiling Flange Dura-Copper Coated. TOLCO Fig All Steel Ceiling Plate. 216 Eaton
ttachments 3199R - eiling Flange 3199RT - eiling Flange ura-opper oated Size Range: 3 /8"-16 & 1 /2"-13 rod Material: Malleable Iron (Stainless Steel Type 304 available) Standard 3199RT is UR-OPPER coated
More informationNotes. Modifications and constructional corrections arising particularly from technological development excepted.
Notes Our service staff and application en gineers will be pleased to offer you their assistance to answer your questions or to work out in cooperation with you specific solutions with the aid of our own
More information$50.00 net All prices are each. Taxes extra as applicable Our plant, stocking warehouse.
AURORA BRAND Pipe Hangers SCHEDULE: H-2010 EFFECTIVE: 5-Apr and Supports 2010 Subject to change without notice. GENERAL NOTES MINIMUM INVOICE: S: F.O.B. : PAYMENT TERMS: OTHER TERMS: ONTARIO 1387 Cornwall
More informationIndex Pipe Hangers and Straps
Index Pipe Hangers and Straps Fig. 1 Standard Clevis Hanger MSS-SP-69, Type 1 WW-H-171E, Type 1 Page 14 Fig. 1CI Clevis Hanger for A.W.W.A. Page 16 Fig. 81 Clevis Hanger WW-H-171E, Type 12 Page 70 Fig.
More informationMevaDec. Contents. Ref. No. Description / Application Product m² list kg
Ref. No. Description / Application Product m² list kg This product list includes all parts necessary for most applications. For parts required for special applications, please refer to the MEVA price list.
More informationPURLINS & RAILS Galvanised profiles
PURLINS & RAILS Galvanised profiles Index Purlins 2 Z-purlins 2 Σ-purlins 3 Sleeves 4 Z-sleeve 4 Σ-sleeve 5 Eave beam 6 Eave beam profile 6 Cleats 7 Bolted cleat for type Z140 to Z400 7 Bolted cleat for
More informationOn-roof system Alpha + Product catalogue
On-roof system Alpha + Product catalogue Contents ALPHA +... 3 1. ALPHA + BASE RAILS... 4 2. ALPHA + SPLICES... 5 3. ALPHA + TELESCOPING END PIECES... 6 4. ALPHA + INTER-MODULE CLAMPS AND MODULE END CLAMPS...
More informationFolding sliding doors
Folding sliding doors Standard program overview Folding sliding doors Folding sliding doors single and double-skinned Product Dimensions in mm width/height Leaf thickness Min. headroom Min. lateral projection
More informationPole Mount Installation Manual
Pole Mount Installation Manual Thank You for Choosing AIMS Power! 1. AIMS Power is a leading supplier of solar products, specializing in PV mounting systems. We ensure our products are manufactured to
More informationEspecially suitable for work in restricted working spaces.
Innovative ratchet pipe cutter with a worldwide patent and ratchet mechanism allows you to cut a pipe without having o completely rotate the tool. Especially suitable for work in restricted working spaces.
More informationBeam and Purlin Clamps Beam Clamps
Metal Framing & Cable Tray Steel City Hangers, Clamps & Fasteners Beam and Purlin Clamps Beam Clamps Fits beam flanges to 2" Supports 4" and 8" threaded rod, S-hooks, electrical boxes, conduit and bridle
More informationSign Holder I Mirror Clamp Distance Holder I Shelf Support
Sign Holder I irror Clamp : Distance Holder I Shelf Support : 02 Content Glass holder with flat head, mirror clamp round or angular, distance holder till diameter 55 mm, shelf supports. irror clamp S50
More informationMEAstep Staircase construction kit
M e t a l A p p l i c a t i o n s MEAstep Staircase construction kit A s s e m b l y i n s t r u c t i o n s Thank you...... for opting for a MEAstep staircase construction kit. This is a high-quality
More informationPart No. Thread Size B Design Load Approx. Wt./100 A in. (mm) Lbs. (kn) Lbs. (kg)
ttachments Fig. 3199R - eiling Flange Fig. 3199RT - eiling Flange ura-opper oated Size Range: 3 /8"-16 & 1 /2"-13 rod Material: Malleable Iron (Stainless Steel Type 304 available) Standard 3199RT is UR-OPPER
More information24" max from each end of the ledger. See detail 6A & 6B, typ. both ends IRC R Ledger R507.2
NOTE: All exposed lumber to be pressure treated (P.T.) or decay resistant. Fasteners for P.T. wood shall be hot-dipped galv. or stainless steel, typical. see pages 2 & 5 for footings 8'-0" -10'-0" Beam
More informationSwifts cable ladder supports
heavy duty cantilever arms Heavy duty cantilever arms enable horizontal runs of cable ladder to be mounted to vertical steel, concrete or masonry surfaces or to Swiftrack channel. They are suitable for
More informationEnclosures, guards and partitions 6. Clamp Profiles Hangers Dual-Rod Mesh Hanger Lifting-Door System Door Security
Clamp Profiles Hangers Dual-Rod Mesh Hanger Lifting-Door System Door Security Application example system solutions for enclosures and guards Components for building enclosures and guards 1 2 3 4 5 7 194
More informationFRP GATES MM08 FRP GATES Rev. 3 COMPOSITE SOLUTION PAGE 1
FRP GATES MM08 08.02.2016 Rev. 3 FRP GATES COMPOSITE SOLUTION PAGE 1 SUMMARY 1. USES AND CHARACTERISTICS... 3 2. EMPLOYMENT FIELDS... 4 3. MATERIALS... 5 3.1 TABLE OF PROFILES AND STRUCTURAL ACCESSORIES...
More informationCHICKEN COOP & CHICKEN RUN. Tools required for assembly (not included)
CHICKEN COOP & CHICKEN RUN ASSEMBLY MANUAL SKU# 6839 Tools required for assembly (not included) Distributed by: TRACTOR SUPPLY COMPANY 0 VIRGINIA WAY, BRENTWOOD, TN 3707 For customer support, call: -888-376-960
More informationHardware Fitting Accessories Bolts
Lever action flush bolt With slide Width: 19 mm Stroke (a): 25 mm 1 Flush bolt 1 Set of fastening material With lever arm Width: 19 mm Stroke (a): 18 mm 1 Flush bolt 1 Set of fastening material Stainless
More informationSPECIAL EXTRUSIONS AND ACCESSORIES
PROFILE SYSTEM SPECIAL EXTRUSIONS s no i s u r t xe l a i c eps Import Belgium & Luxembourg Profilex s.a. 4A, Z.I. In den Allern L-9911 Troisvierges Tel: 00352/99 89 06 Fax: 00352/26 95 73 73 www.profilex-systems.com
More informationadaptivemechanical adaptive
Mechanical clamping elements mechanical 6 Content Product group 6 Sliding clamp, mechanical 6.2210 Clamping block, mechanical 6.2212 High-pressure spindle, mechanical with integral wedge system 6.2270
More informationSuperstrut. Metal Framing. Beam Clamps. Design Loads. Finishes and Special Materials
Loads Where design loads are indicated, they provide for a safety factor of 3 in conformance with the merican Standard Code for Pressure Piping. For more information, see page 57 for Engineering Data and
More informationNEW. Automation Technology 768 series
Automation Technology 78 series Screw locking acc. to DIN EN 07--0 Degree of protection IP7 Moulded versions Easy Assembly Excellent EMC shielding (versions with shielding rings 0 ) Versions with shielding
More informationWADE 2-1. Universal Carrier. Exclusive Features of 400 Series Universal Carrier for Lavatories, Urinals, Drinking Fountains.
Universal Carrier Exclusive Features of 400 Series Universal Carrier for Lavatories, Urinals, Drinking Fountains. The 400 series carrier accommodates most urinal, water-cooler or hanger plate lavatory
More informationGURANTEED TECHNICAL PARTICULARS OF BACK CLAMP FOR LT CROSS ARM
Technical Specification of Back Clamp for LT Cross Arm (MS) Back clamp for LT Cross Arm made out of 50 x 6mm MS Flat suitable for 8m X 300 Kg PSC poles. After fabrication the cross arm shall be painted
More information2nd edition English 05/2008 Documentation 2008 Schaeffer AG, Berlin
Manual for ENCLOSURE ASSEMBLY 2nd edition English 05/2008 Documentation 2008 Schaeffer AG, Berlin All rights reserved. This manual may not be reproduced in any form, in whole or in part, without the prior
More informationAir-supply elements. Air-supply elements MGE Flanged plate (p. 5-3) M12-1/4" (p. 5-4) Longitudinal end connector (p.
Air-supply elements MGE 13.0 5-1 Air-supply elements 1 2 3 4 5 6 7 8 Flanged plate (p. 5-3) Connection piece (p. 5-4) Connection screw fitting -1/4" (p. 5-4) Longitudinal end connector (p. 5-5) 9 11 12
More informationALFRA PRESS. Made in Germany by ALFRA
52 ALFRA PRESS Made in Germany by ALFRA 53 ALFRA PRESS Overview ALFRA PRESS AP 250 ALFRA PRESS AP 400 Page 56 Page 58 Control cabinet housing, control cabinet doors, mounting plates Control cabinet housing,
More informationWire Mesh Cable Tray System for Channeling of Cable Wiring
Wire Mesh Cable Tray System for Channeling of Cable Wiring A Simple-to-Install basket for safe and proper installation of facility wiring in the ceiling and under the floor. Wall Mount Ceiling Mount s
More informationTensile strength of ASSY plus VG screws wood-wood (softwood)
Tensile strength of ASSY plus VG screws wood-wood (softwood) STRENGTHENS THE WOOD - INSTEAD OF SPLITTING IT 23.05.2017 Table of contents for tensile strength Determining the tensile strength - Table values
More informationTWL 1500 TORQUE WRENCH LOADER
TWL 1500 TORQUE WRENCH LOADER OPERATOR S HANDBOOK (PART NUMBER 60246.1) CONTENTS PAGE 1 OF 8 INTRODUCTION 2 SPECIFICATION 3 ITEMS SUPPLIED 3 AVAILABLE OPTIONS 3 ASSEMBLY INSTRUCTIONS A. ASSEMBLY OF TRANSDUCER
More informationHex Cap Screws Coarse & Fine Thread
INDUSTRIAL Product Description Hex head cap screws are manufactured to dimensional standards of ASME B18.2.1 and to various material and mechanical standards of ASTM and SAE. The length of a cap screw
More informationMOSO precast fixings for concrete façades
www.modersohn.eu MOSO precast fixings for concrete façades COMING SOON: toothed anchor channel Adjustable wind restraint Update to MOSOCON 3.0 Panel hanger: FB-H Clamping anchor: FB-E Restraint anchor:
More informationNEW RÖHM VICE NOVELTIES. RKE-M and RZM (size 92)
NEW RÖHM VICE NOVELTIES RKE-M and RZM (size 92) NC-COMPACT-VICE RKE-M MANUALLY OPERATED APPLICATION Particularly suitable for use on machining centers and palletisers. TYPE Clamping system mechanical without
More informationDECKS. Stairway illumination Positive attachment of ledger Lateral load connection required board (R507.2) required (R ) (R311.7.
DECKS Max. riser height-7 ¾ Min. tread depth-10 Landings required at (R311.7.5.1) (R311.7.5.2) top and bottom of stairs (R311.7.6) Notched guardrail post NOT allowed Graspable handrail required Spacing
More informationWire Mesh Cable Tray System for Channeling of Cable Wiring
Wall Mount A Simple-to-Install basket for safe and proper installation of facility wiring in the ceiling and under the floor. Floor Mount Wire Mesh Cable Tray System for Channeling of Cable Wiring Features
More informationWM en. Zero point clamping system SPEEDY airtec 1
SPEEDY airtec 1 GO! Maximum productivity Using the zero point clamping system SPEEDY classic you will increase your productivity to a maximum. Adjustment and checking processes are no longer necessary
More informationWash basin and urinal fixings Complete fixing sets.
123 Wash basin and urinal fixings... page 124 WC and sanitary fixings... page 127 Accessories for sanitary fixings... page 129 WC fixing WB... page 131 On wall installation... page 132 124 SANITARY FIXINGS
More informationHardware Fitting Accessories Door Seals
Areas of application Protection against cold, draught and vermin Reduces light leakage, sound insulation Smoke control, fire resistance Reduces the energy consumption of air conditioning systems (see following
More informationCar-park barriers, 500 mm above ground, flexible
Car-park barriers, 500 mm above ground, flexible Crash-proof barrier post Flexible to impact and thrust Above ground 500 mm Pass-over height approx. 95 mm Flexible! Crash-proof! 40215UZB approx.kg Part-No.
More informationHIGH PRECISION WELDING TABLES
HIGH PRECISION WELDING TABLES WWW.STRONGHANDTOOLS.COM SYSTEM 28 INTRODUCTION Siegmund is committed to producing the world s finest welding and fixture tables. For 2015 we are pleased to present our biggest
More informationAirfield Lighting. Product Description Inset & Elevated Light Support
Product Inset & Elevated Light Support Transforment Case Adaptor Ring Extension Ring Cover Plate Base Plate Frangible Coupling Curve Tube Tube Tripod Stand Note: This page is blank for convenient double-sided
More informationU2B. Force Transducer. Special features. Data sheet
U2B Force Transducer Special features - Tensile/compressive force transducer - Non rusting, degree of protection IP67 - Can be configured with different cable lengths, plug fitting and TEDS on request
More informationCONTENTS CABLE MANAGEMENT AND
CONTENTS CABLE MANAGEMENT SECTION 9 SECTION 9 CABLE MANAGEMENT AND ASSOCIATED PRODUCTS.................................91 PIN CLIPS H335B SERIES.......................................92 COPPER EARTH RODS.........................................92
More information4-Port Antenna Frequency Range Dual Polarization HPBW Adjust. Electr. DT
4-Port Antenna Frequency Range Dual Polarization HPBW Adjust. Electr. DT R1 0.5 7 0 6 set by hand or by optional RCU (Remote Control Unit) X 90 B1 X 90 4-Port Antenna / 90 /90 16.5/18i 0.5 7 /0 6 T Type
More informationRoof drainage. Simply beautiful
Roof drainage Simply beautiful Rainwater collectors Collectors hearts beat faster! LempHirz: rainwater collectors allow the use of rainwater and convince with their simple implementation. Basic model (zinc)
More informationPipe fasteners for metal roof
VdS Guidelines for water extinguishing systems VdS 2100-31en Requirements and test methods VdS 2100-31en : 2011-11 (01) Publishing house: VdS Schadenverhütung GmbH Amsterdamer Str. 172-174 50735 Köln,
More informationMOSO precast fixings for concrete façades
www.modersohn.eu MOSO precast fixings for concrete façades COMING SOON: toothed anchor channel Adjustable wind restraint Update to MOSOCON 3.0 Panel hanger: FB-H Clamping anchor: FB-E Restraint anchor:
More informationMC-CVR-1. Király Trading KFT H-1151 Budapest Mogyoród útja
MC-CVR-1 Király Trading KFT H-11 Budapest Mogyoród útja -14 E-mail:_agi@kiralytrading.hu carver clamp Series Applications C-Style Carver Clamps A djustment screw is shielded and out of the work area Ideal
More informationU2B. Data sheet. Force Transducer. Special features. B en
U2B Force Transducer Special features Data sheet Tensile/compressive force transducer Non-rusting, degree of protection IP67 Can be configured with different cable lengths, plug fitting and TEDS on request
More informationFebruary 2004 RONDA. Circular Formwork Instructions for assembly and use
February 2004 Circular Formwork Instructions for assembly and use Table of Contents Product Features 2 General Survey 3 Components 4 7 Measures of Ronda Elements 8 9 Adustment of Radii 10 11 Connections
More informationStandard program overview Steel smoke-proof doors
Smoke-proof doors Standard program overview Steel smoke-proof doors Pos. Product 1 RS-1 Steel door (thin rebated) Smoke-proof door in accordance EN 1634-3 / DIN 18095 Dimensions W 625-1350 H 1750-2500
More informationSECTION - 3 EARTHING CLAMPS & FITTINGS
SECTION - 3 EARTHING CLAMPS & FITTINGS 78 EARTHING CONDUCTOR TO FLAT SURFACE TYPE ESS - SINGLE CONDUCTOR TYPE EST - TWIN CONDUCTOR Types ESS (single conductor) and EST (twin conductor) clamps are designed
More information1 Scope. 2 Normative references. 3 Dimensions. Page 2 DIN :
Page 2 1 Scope This standard specifies dimensions and technical delivery conditions for stud bolts with metric thread made of steel, stainless steel or nonferrous metal. 2 Normative references This standard
More informationPUNCHING DRILLING HEBEN LIFTING CUTTING DEBURRING
PUNCHING DRILLING LIFTING CUTTING DEBURRING www.alfra.de E-EN E ALFRA Edge-Milling and Deburring Devices Overview KFV KFH 150 Page 7 78 2520 25100 Prism mounting L = 150 / W = 20/40 End mill Ø 45 or straight
More information