CLAMP SYSTEM
|
|
- Alexia Short
- 5 years ago
- Views:
Transcription
1 LMP SYSEM obalch ps Hejreskovvej 24 K-3490 Kvistgård enmark el.: anske ank: IN - KK: K EUR: K Swift code: KKK
2 PHL and PK N 15 - N 1 N N 0 N H h lamp system - type PHL and PK Moveable bearing for non-insulated pipelines S2, clamps GS 45, threaded parts 8.8/8, sliding plate P6, hot-dip galvanised M12 - Nm , other profiles on request* PHL h (OP) PK h (OP) Ø Pipe H (MOP) PHL-022/120-R-F PHL-027/120-R-F PHL-034/120-R-F PHL-043/120-R-F PHL-049/120-R-F PHL-061/120-R-F PHL-077/120-R-F PHL-089/120-R-F PHL-115/120-R-F PHL-1/120-R-F PHL-169/120-R-F PHL-220/120-R-F PHL-273/120-R-F PHL-324/120-R-F PK-027/120-R-F PK-034/120-R-F PK-043/120-R-F PK-049/120-R-F PK-061/120-R-F PK-077/120-R-F PK-089/120-R-F PK-115/120-R-F PK-1/120-R-F PK-169/120-R-F PK-220/120-R-F PK-273/120-R-F PK-324/120-R-F ,3,9 33,7 42,4 48,3,3 76,1 88,9 114,3 139,7 168,3 219, , ,9 0,9 0,9 1,0 1,1 1,8 1,8 Ordering example: PHL-115/120-R-F, hot-dip galvanised PHL - moveable bearing for non-insulated pipelines R - material S profile width 120, HE Ø114,3/N 0 * OS: other diameters on request. lamp system can also be used for stainless steel pipes obalch ps Hejreskovvej 24 K-3490 Kvistgård enmark el.: anske ank: IN - KK: K EUR: K Swift code: KKK
3 PHF N 15 - N 1 N N 0 N H h lamp system - PHF Guide bearing for non-insulated bearings S2, clamp GS 45, threaded parts 8.8/8, hot-dip galvanised** M12 - Nm , other profiles on request* PHF-022/120-R-F PHF-027/120-R-F PHF-034/120-R-F PHF-043/120-R-F PHF-049/120-R-F PHF-057/120-R-F PHF-061/120-R-F PHF-077/120-R-F PHF-089/120-R-F PHF-115/120-R-F PHF-1/120-R-F PHF-169/120-R-F PHF-220/120-R-F PHF-273/120-R-F PHF-324/120-R-F Pipe Ø 21,3,9 33,7 42,4 48,3 57,0,3 76,1 88,9 114,3 139,7 168,3 219, ,9 H (MOP) h (OP) ,4 1,6 1,8 1,9 2,3 2,8 3,8 4,2 4,7 Ordering example: PHF-061/120-R-F, hot-dip galvanised PHF = guide bearing for non-insulated pipelines R = material S2 061 = pipe Ø N -,3 120 = profile width 120, ex. HE 120 * OS: other diameters on request. ** lamp system also available for stainless steel pipes obalch ps Hejreskovvej 24 K-3490 Kvistgård enmark el.: anske ank: IN - KK: K EUR: K Swift code: KKK
4 PHP N 15 - N 1 N N 0 N H h lamp system - PHP nchor for non-insulated pipelines S2, clamp GS 45, threaded parts 8.8/8, hot-dip galvanised** M12 - Nm , other profiles on request* PHP-022/120-R-F PHP-027/120-R-F PHP-034/120-R-F PHP-043/120-R-F PHP-049/120-R-F PHP-057/120-R-F PHP-061/120-R-F PHP-077/120-R-F PHP-089/120-R-F PHP-115/120-R-F PHP-1/120-R-F PHP-169/120-R-F PHP-220/120-R-F PHP-273/120-R-F PHP-324/120-R-F Pipe Ø 21,3,9 33,7 42,4 48,3 57,0,3 76,1 88,9 114,3 139,7 168,3 219, ,9 H (MOP) h (OP) FY 1,2 1,2 1,2 1,2 1,3 1,6 1,6 1,8 4,1 4,3 4,5 5,1 6,8 7,3 Ordering example: PHP-115/120-R-F, hot-dip galvanised PHP = anchor for non-insulated pipelines R = material = pipe Ø N 0-114,3 120 = profile width 120, ex. HE 120 * OS: other diameters on request. ** lamp system also available for stainless steel pipes obalch ps Hejreskovvej 24 K-3490 Kvistgård enmark el.: anske ank: IN - KK: K EUR: K Swift code: KKK
5 PK-RS and PK-RSL PK-RS PK-RSL N lamp system with u-bolts - type PK-RS and PK-RSL nchors and sliding supports for non-insulated pipes S2, clamp GS 45, threaded parts 8.8/8, sliding plate P6 - to +80, hot-dip galvanised ** M12 - Nm , other profiles on request* nchor PK-RS-027/120-R-F PK-RS-034/120-R-F PK-RS-043/120-R-F PK-RS-049/120-R-F PK-RS-061/120-R-F PK-RS-077/120-R-F PK-RS-089/120-R-F PK-RS-115/120-R-F PK-RS-1/120-R-F PK-RS-169/120-R-F PK-RS-220/120-R-F PK-RS-273/120-R-F PK-RS-324/120-R-F Sliding PK-RSL-034/120-R-F PK-RSL-043/120-R-F PK-RSL-049/120-R-F PK-RSL-061/120-R-F PK-RSL-077/120-R-F PK-RSL-089/120-R-F PK-RSL-115/120-R-F PK-RSL-1/120-R-F PK-RSL-169/120-R-F PK-RSL-220/120-R-F PK-RSL-273/120-R-F PK-RSL-324/120-R-F Pipe Ø,0-,9,0-33,7 38,0-42,4 44,5-48,3 57,0-,3 70,0-76,1 8-88,9 1,6-114, ,7 159,0-168,3 205,0-219,1 7,0-27 6,0-323,9 N ,58 0,53 0,47 0,44 0,39 0,33 0, 0, 0,22 0,19 0,15 FY 0,58 0,53 0,47 0,44 0,39 0,33 0, 0, 0,22 0,19 0,15 0, 0,76 0,96 1,09 1,36 1 1,98 2, 2, 2, 2, 1,84 1,88 1,90 1, ,11 2,54 2,64 2,76 3,77 4,11 4,79 Ordering example: PK-RS-089/120-R-F, hot-dip galvanised PK-RS = Profile clamp with lift-off prevention with sliding plate R = material S2 89 = pipe Ø N 0-88,9 120 = profile width120, ex. HE 120 * OS: other diameters on request. ** lamp system also available for stainless steel pipes obalch ps Hejreskovvej 24 K-3490 Kvistgård enmark el.: anske ank: IN - KK: K EUR: K Swift code: KKK
6 PK min Profile clamp - PK With lift-off prevention for pipe bearings S2, clamp GS45, threaded parts 8.8/8, hopt-dip galvanised M12 - Nm, M16 - Nm, M20-90 Nm 0-0, opther profiles on request PK-080/12-R-F PK-120/12-R-F PK-1/12-R-F PK-200/12-R-F Profil hread rod G 2,8 2,6 3,2 2,1 1,8 2,3 2,4 2,5 PK-1/16-R-F PK-200/16-R-F PK-2/16-R-F PK-0/16-R-F ,3 2,9 2,5 2,2 3,6 3,1 2,7 2,4 3,7 3,8 6,1 6,3 PK-1/20-R-F PK-200/20-R-F PK-2/20-R-F PK-0/20-R-F ,5 12,1 8,1 5,3 7,1 6,0 5,3 4,7 7,9 8,1 11,3 1 Ordering example: PK-0/16-R-F, hot-dip galvanised PK = profile clamp with lift-off prevention, without sliding plate R = material 2 0 = profile width 2-0, ex. HE 0 16 = thread rod Ø obalch ps Hejreskovvej 24 K-3490 Kvistgård enmark el.: anske ank: IN - KK: K EUR: K Swift code: KKK
7 PK-U min lamp system with bolts - PK-U With lift-off prevention for pipe bearings S2, clamp GS45, threaded parts 8.8/8, hot-dip galvanised M12 - Nm U80 - U200 Profile G PK-U080/12-R-F PK-U0/12-R-F PK-U120/12-R-F PK-U1/12-R-F PK-U1/12-R-F PK-U/12-R-F PK-U200/12-R-F U080 U0 U120 U1 U1 U U200 2,2 2,3 2,3 2,5 2,5 2,6 2,7 Ordering example: PK-U080/12-R-F, hot-dip galvanised PK = profile clamp with lift-off prevention, without sliding plate R = material S2 U080 = profile width M12 = thread rod obalch ps Hejreskovvej 24 K-3490 Kvistgård enmark el.: anske ank: IN - KK: K EUR: K Swift code: KKK
8 PK-UM min min lamp system - PK-UM With lift-off prevention for pipe bearings S2, clamp GS45, threaded parts 8.8/8, hot-dip galvanised M12 - Nm U80 - U1 Profile G PK-UM080/12-R-F PK-UM0/12-R-F PK-UM120/12-R-F PK-UM1/12-R-F U080 U0 U120 U1 1,6 1,6 lamp system - PK-W With lift-off prevention for pipe bearings S2, clamp GS45, threaded parts 8.8/8, hot-dip galvanised M12 - Nm Lx, L80x80, L0x0 Profile G PK-W0/12-R-F PK-W080/12-R-F PK-W0/12-R-F Lx x 6/8/ L80x80 x 8//12 L0x0 x /12/14 1,8 1,9 Ordering example: PK-W080/12-R-F, hot-dip galvanised PK = profile clamp with lift-off prevention, without sliding plate R = material S2 U080 = profile width M12 = thread rod obalch ps Hejreskovvej 24 K-3490 Kvistgård enmark el.: anske ank: IN - KK: K EUR: K Swift code: KKK
9 PK 27 min Sliding plate see page lamp system - PK With lift-off prevention for pipe bearings with support plate (support plate see page ) S2, clamp GS 45, threaded parts 8.8/8, hot-dip galvanised M12 - Nm, M16 - Nm, M20-90 Nm 0-0, other profiles on request PK-120/12-R-F PK-1/12-R-F PK-200/12-R-F Profile hread rod ,8 2,6 3,2 2,8 2,1 2,2 PK-1/16-R-F PK-200/16-R-F PK-2/16-R-F PK-0/16-R-F ,3 2,9 2,5 2,2 3,6 3,1 2,7 2,4 3,1 3,2 3,3 3,5 PK-1/20-R-F PK-200/20-R-F PK-2/20-R-F PK-0/20-R-F ,5 12,1 8,1 5,3 7,1 6,0 5,3 4,7 6,7 6,9 7,1 7,5 Ordering example: PK-2000/12-R-F, hot-dip galvanised PK = with lift-off prevention and support plate 200 = profile width 0-200, ex. IP = thread rod Ø obalch ps Hejreskovvej 24 K-3490 Kvistgård enmark el.: anske ank: IN - KK: K EUR: K Swift code: KKK
10 eflon for clamp system PSK, PPK and PK PSK/PPK Sliding plate in steel or P PK Sliding plate in steel with teflon - - L 27 L 27 Support plate - PSK, PPK and PK Support plate PSK med of steel, PPK made of P6, PK made of steel with cellular PFE Ope. temperature Steel up to 0 - P/PFE - to , other profiles on request PSK Steel PSK-0-R-F PSK-080-R-F PSK-0-R-F PSK-120-R-F PSK-1-R-F PSK-1-R-F PSK-200-R-F PSK-220-R-F PSK-2-R-F PSK-2-R-F PSK-280-R-F PSK-0-R-F PSK P PPK-0-R PPK-080-R PPK-0-R PPK-120-R PPK-1-R PPK-1-R PPK-200-R PPK-220-R PPK-2-R PPK-2-R PPK-280-R PPK-0-R PK Steel/PFE PK-0-R-F PK-080-R-F PK-0-R-F PK-120-R-F PK-1-R-F PK-1-R-F PK-200-R-F PK-220-R-F PK-2-R-F PK-2-R-F PK-280-R-F PK-0-R-F L H * ,3 0,4 0,5 0,6 0,7 1,0 1,1 1,2 1,3 1,4 Ordering example: PSK-120-R-F, hot-dip galvanised PSK = support plate of steel 120 = support plate 120, ex. for GL-120/115-R-3 * = width of pipe support obalch ps Hejreskovvej 24 K-3490 Kvistgård enmark el.: anske ank: IN - KK: K EUR: K Swift code: KKK
11 P min lamp system - P With lift-off prevention for pipe bearings S2, clamp GS 45, threaded parts 8.8/8, hot-dip galvanised M12 - Nm, M20-90 Nm P M, for Modularsteel 120 and 80,, Profile hread rod G Mm P-080/-R-F P-120/12-R-F ,0 11,0 6,0 6,0 0,9 1,0 P M, for profiles 85-0 P-120/12-R-F P-1/12-R-F P-200/12-R-F P-2/12-R-F P-0/12-R-F ,0 16,0 1,0,0 9,0 8,0 7,0 6,0 1,9 1,9 2,1 2,2 P M20, for profiles P-0/20-R-F ,0,0 6,3 Ordering example: P-200/12-R-F, hot-dip galvanised PK = clamp set with lift-off prevention, without sliding plate 200 = profile width 0-200, ex. IP = thread rod Ø obalch ps Hejreskovvej 24 K-3490 Kvistgård enmark el.: anske ank: IN - KK: K EUR: K Swift code: KKK
12 PPU, PPU-P and PPU-P PPU PPU-P PPU-P 15 min 13 lamp system - PPU With lift-off prevention for pipe bearings, bottom-ventilation S2, clamp GS45, threaded parts 8.8/8, hot-dip galvanised M12 - Nm 85-0, other profiles on request PPU-120/12-R-F PPU-1/12-R-F PPU-200/12-R-F PPU-2/12-R-F PPU-0/12-R-F Profile hread rod lamp system - PPU-P and PPU-P G 2 19,0 16,0 1,00,0 9,0 8,0 7,0 6,0 With lift-off prevention for pipe bearings, bottom-ventilation, with P6/PFE-support plate S2, clamp GS45, threaded parts 8.8/8, hot-dip galvanised, P6/PFE sliding plate - to+80 M12 - Nm , other profiles on request 2,9 3,1 3,3 3,4 PPU-P-120/12-R-F PPU-P-1/12-R-F PPU-P-200/12-R-F Profile hread rod G 2 19,0 16,0,0 9,0 8,0 2,9 3,1 PPU-P-120/12-R-F PPU-P-1/12-R-F PPU-P-200/12-R-F ,0 16,0,0 9,0 8,0 2,9 3,1 Ordering example: PPU-200/12-R-F, hot-dip galvanised PPU = profile set with lift-off prevention, without sliding plate 200 = profile width 0-200, ex. HE = thread rod Ø * OS middle piece can be delivered for PPU with profiles > 2 width, combined with short supports. Please ask for PK-M-12. If using pipe suppports as hanging version, the loads will halve (%) obalch ps Hejreskovvej 24 K-3490 Kvistgård enmark el.: anske ank: IN - KK: K EUR: K Swift code: KKK
13 PKF F min lamp system - PKF With guide S2, clamp GS45, threaded parts 8.8/8, hot-dip galvanised M12 - Nm, M16 - Nm, M20-90 Nm 0-0, other profiles on request PKF-080/12-R-F PKF-120/12-R-F PKF-1/12-R-F PKF-200/12-R-F Profile hread rod F G - 3,2 2,6 2,2 2,3 2,4 PKF-1/16-R-F PKF-200/16-R-F PKF-2/16-R-F PKF-0/16-R-F ,6 3,1 2,7 2,4 3,9 6,3 6,5 PKF-1/20-R-F PKF-200/20-R-F PKF-2/20-R-F PKF-0/20-R-F ,1 6,0 5,3 4,7 7,9 8,1 11,1 1 Ordering example: PKF-2/20-R-F, hot-dip galvanised PK = with guide, without support plate 2 = profile width 2, ex. HE 0 20 = thread rod Ø obalch ps Hejreskovvej 24 K-3490 Kvistgård enmark el.: anske ank: IN - KK: K EUR: K Swift code: KKK
14 PFPS Optional Middle-piece welded on support on site See table Middle-piece welded on support, clamping system unmounted, nuts optional lamp system - PFPS nchor, clamped: middle-piece already welded on support (not part of the clamping system) S2, clamp GS45, threaded parts 8.8/8, hot-dip galvanised M12 - Nm, M16 - Nm, M20-90 Nm 0-0, other profiles on request PFPS-120/12-R-F PFPS-1/12-R-F PFPS-200/12-R-F PFPS-2/12-R-F PFPS-0/12-R-F Profile hread rod F G 2,8 2,6 2,8 2,6 3,6 3,4 3,2 1,3 1,4 1,6 PFPS-1/16-R-F PFPS-200/16-R-F PFPS-2/16-R-F PFPS-0/16-R-F ,4 3,4 3,4 3,4 4,8 4,8 4,8 4,8 1,8 1,9 2,2 PFPS-1/20-R-F PFPS-200/20-R-F PFPS-2/20-R-F PFPS-0/20-R-F ,6 7,7 7,7,6,6 7,7 7, ,0 9,0 4,6 4,8 5,0 5,3 Optional Middle-piece and nuts can be ordered on separat types middle-piece PK-F/12x0 PK-F/16x0 PK-F/20x0 0,4 1,2 nuts 32--8F F F 0,02 0,03 0,06 Ordering example: PFPS-200/20-R-F, hot-dip galvanised PFPS = fix-piont clamp, without pipe shoe 200 = profile width 200, ex. HE = thread rod Ø obalch ps Hejreskovvej 24 K-3490 Kvistgård enmark el.: anske ank: IN - KK: K EUR: K Swift code: KKK
15 Expert advice With our many years of experience as suppliers to the pipeline and plant construction industries we are well placed to assist you with expert advice on the design and detail for large-scale projects including can provide tailor made solutions for specific problems and applications. Loads he calculation loads mentioned in this document were made with statically models under certain conditions and parameters. ll possible care is taken compliance and applicable technical regulations and applicable standards, guarantees are given against the loads for the static cases shown in the catalog, these are approximate values. Liabilities for the particular application cannot be derived. ny unauthorized vaqriations or changes would invalidate any warranty and guarantee on our part. s he materials and characteristics are in accordance to the corresponding standards and should be used as the minimum requirement. For the characteristics and quality, ernecker would only accept warranty in combination with an inspection certificate 3.1 Special design For your individual requirements we also offer special pipe supports. Either as a variant production through the use of other: - materials (e.g. P5GH, P275NL1) - coatings (e.g. uplex) - diameter (e.g. R-2-R) - lengths (e.g. GLY-200/324L0-R3) - heights (e.g. GLY-75/324-R3) or according to your specifications routines or static specification. SI units he psysical quantities are stated in SI units as follows: - imensions in - Loads in - emperatures at 80 - s in in not stated otherwise. General tolerances he general tolerances are for lengths, angles, shape and location in accordance with ISO 2768-ck. Heat treatment We can hot form and heat treat components to order, e.g. stress-free annealing, normalizing or hardening of high temperature materials. On request we supply a diagram of the heat treatment and temperature curve of the heat treated components supplied. orrosion protection and surface finishes - he corrosion protection of our components in accordance with IN EN ISO Hot-dip galvanized components are standard galvanized to IN EN ISO ccording to your needs and specifica tions we can also provide our compo nent parts with the following surface treatment: Sanding, pickling, oiling, basic coating, painting or galvanic sur face treatment. Prefabrication service supplied complete to site s a specialist manufacturer in the field of pipe supports we can fabricate all supports and ancillaries for you ready to install, complete with labeling, to order. Prefabricated and labeled components enable a quick and efficient assembly and save time on site. eknical information cceptance/ertificate On request we can supply our pipe support products with acceptance test certificates to IN EN or with factory certificates to IN EN We can arrange for acceptance tests to be carried out by the ÜV or other inspectorate on our premises if required. Inspections by our customers can be arranged at any time. Our safety is your guarantee We operate in a quality assurance system that is certified to IN ISO 9001, which means that we have a formally written and approved Quality Management Manual (QMH). his is your guarantee that we will turn your specifications and requirements into a fully functional and reliable system that is right for the job. Registrations (Status in 05/2012) QS - IN ISO 9001:2008 ÜV W-0 VS - General certificate of qualification to IN ÜV - omponents registration KWU QS - K 11 Legal notice With the publication of this catalog supersedes previous editions. his catalog is protected by copyright. ny reproduction is, in whole or in part, only legal with the permission of the publisher. For any typographical errors, product changes due to technical developments and changing model no liability is accepted. In addition, all components must be used accordingly to purposes. onversion in the catalouge for the applied load value at other temperatures. (Loads should only by converted for the same material, never from one material to another) Nr. IN 20 / S2JR EN 0-2 1,00 0 0,74 0,69 0,62 0,52 16Mo EN ,47 1,43 1,38 1,27 1,11 1,00 0, rMo EN ,65 1, 1,48 1,36 1, 1,19 1,14 1,00 0,67 0,41 0,27 rmo EN ,42 1,39 1, 1,32 1, 1,21 1,16 1,11 1,04 1,00 0,77 0,56 0,38 rnii IN 4 1,00 0, ,77 0,72 0,68 0,66 rnimoi IN 4 1,00 0, ,76 0,70 0,68 0,66 echnical modifications reserved obalch ps Hejreskovvej 24 K-3490 Kvistgård enmark el.: anske ank: IN - KK: K EUR: K Swift code: KKK
beam and support solution Catalogue 6 english
6 7 www.hoseflex.com 8 beam and support solution Catalogue 6 english Overview catalogue no. Pipe clamps, ancillary equipment 1 Sliding supports 2 Clamp systems 3 Roller bearings 4 Pre-insulated pipe supports
More informationBernecker. Katalog 3 deutsch. Clamp systems. Catalogue 3 english
R Bernecker 1 2 3 4 Katalog 3 deutsch 5 Clamp sstems Catalogue 3 english Overview catalogue no. Pipe clamps, ancillar equipment 1 Sliding supports 2 Clamp sstems 3 Roller bearings 4 Pre-insulated pipe
More informationPipe clamps, ancillary equipment 1. Sliding supports 2. Clamp systems 3. Roller bearings 4. Pre-insulated pipe supports 5.
Catalogue 9 English Overview catalogue no. Pipe clamps, ancillary equipment 1 Sliding supports 2 Clamp systems 3 Roller bearings 4 Pre-insulated pipe supports 5 ModularSystems 6 ModularSteel 120 7 ModularSteel
More informationFabricated Structural Steelwork. Section 8
Fabricated Structural Steelwork Section 8 INDEX DESCRIPTION FIGURE No. PAGE Pipe Shoe Welded Pipe Shoe Welded (Heavy Duty) Pipe Shoe Clamped Pipe Shoe Clamped (Heavy Duty) Inverted Tee Post Upright Tee
More informationSensyTemp TSBA (BA R) Resistance thermometer for building automation, machine construction and environmental engineering
Change from one to two columns Data Sheet 10/10-3.61-EN Rev. D SensyTemp TSB (B R) Resistance thermometer for building automation, machine construction and environmental engineering Measurement made easy
More informationMEFA mounting accessories
MEFA mounting accessories Mounting accessories Base plates Page 5/2 Double holder Page 5/4 Height-adjustable suspensions Page 5/5 Pendular bolt joints Page 5/6 Trapeze hanger Page 5/7 Threaded hooks, distance
More information1. General Information Background Information Validity Basic Requirements Drawings and their Information...
TABLE OF CONTENT 1. General Information...3 1.1. Background Information...3 1.2. Validity...3 1.3. Basic Requirements...4 1.4. Drawings and their Information...5 2. Documentation: Certificates and NDT...6
More informationFull Height Ladder Safety Gate
Full Height Ladder Safety Gate Installation Instructions/Operation and Maintenance Manual Models Powder Coat Yellow (PCY) 304 Stainless Steel (SS) Hot Dipped Galvanized (GAL) Table of Contents Product
More informationInstallation Instructions/Operation and Maintenance Manual. PS DOORS Contact Information. Website psdoors.com
Ladder Safety Gate Installation Instructions/Operation and Maintenance Manual Models All Models: LSG-5 to LSG-48 Table of Contents Product Information...2 Inspection & Mainteance...2 Warranty Information...2
More informationBarofor Round System (polyester coated) Panels, Posts, Accessories
1 Scope This Technical Data Sheet specifies the requirements for the Barofor Round System. The complete system exists of: Panels Posts Accessories such as fixation system and posts caps. Panels and posts
More informationProduct Guide Specification
HALFEN USA Inc. March 2012 8521 FM 1976 P.O. Box 547 Converse, TX 78109 Toll Free 800-423-9140 Fax 888-277-1695 Website www.halfenusa.com E-mail info@halfenusa.com Product Guide Specification Specifier
More informationPEC-TA Cast-in Channels and Bolts. Certified German quality for high-end fixing solutions. Advantages of using PEC Cast-in Channels.
Fixing Technology s and Bolts PEC Cast-in Channels are ideally suited for quick, reliable and cost-efficient fixing of different construction elements. The possibility of making simple and flexible adjustments
More informationSimotec. 13.i
Products: Framo 80 13.0 Products: Framo 80 13.1 Products: Structural Elements 100/120 13.2 Products: Pipe Shoes 13.3 Framo 80: Beam Section and Screw 13.4 Framo 80: Cantilever Bracket and End Support STA
More informationITB TECHNICAL APPROVAL AT /2011
INSTYTUT TECHNIKI BUDOWLANEJ P L 0 0 6 1 1 W A R S A W, u l. F I L T R O W A 1 Phone: (48 22) 825-04-71; (48 22) 825-76-55; fax (48 22) 825-52-86 M e m b e r o f t h e E u r o p e a n U n i o n o f A g
More informationNON-PENETRATING ROOFTOP HANGERS AND SUPPORTS
SECTION 15062 NON-PENETRATING ROOFTOP HANGERS AND SUPPORTS For best results, display hidden notes to specifier. PART 1 GENERAL 1.1 SECTION INCLUDES A. Pipe supports. B. Conduit supports. C. Duct supports,
More informationAutomotive Fasteners for Automotive Industry
Automotive Fasteners for Automotive Industry PEINER Umformtechnik GmbH Woltorfer Straße 20-24 D-31224 Peine Phone + 49 (0) 5171 545-0 Fax + 49 (0) 5171 545-180 e- mail sales@peiner-ut.com Internet www.peiner-ut.com
More informationSECTION STRUCTURAL STEEL. A. PART A and DIVISION 1 of PART B are hereby made a part of this SECTION.
SECTION 051200 PART 1 GENERAL 1.01 GENERAL REQUIREMENTS A. PART A and DIVISION 1 of PART B are hereby made a part of this SECTION. B. Examine all conditions as they exist at the project prior to submitting
More informationDelmec Engineering Limited
Delmec Engineering Limited DEL6 Tower Maintenance Specification Delmec Product Manual 2 Delmec Engineering Ltd. Approvals Name Signature Date Ivan Daly Kealan Delaney Delmec Engineering Ltd. Distribution
More informationA comprehensive pipework prefabrication service PES PIPEWORK ENGINEERING SERVICES LIMITED
A comprehensive pipework prefabrication service PES PIPEWORK ENGINEERING SERVICES LIMITED Whatever your pipework requirements WE CAN DELIVER Established in 1982, Pipework Engineering Services has earned
More informationSprinkler wet pipe and dry pipe. For FM approval of the dry pipe model "I" shall be used. SBF 120: 7 applies to model "E".
Product Name Nordic Flow FM Thin Wall Pipes Application Sprinkler wet pipe and dry pipe. For FM approval of the dry pipe model "I" shall be used. SBF 120: 7 applies to model "E". Manufacturing Standard
More informationGURANTEED TECHNICAL PARTICULARS OF BACK CLAMP FOR LT CROSS ARM
Technical Specification of Back Clamp for LT Cross Arm (MS) Back clamp for LT Cross Arm made out of 50 x 6mm MS Flat suitable for 8m X 300 Kg PSC poles. After fabrication the cross arm shall be painted
More information1.1 RELATED DOCUMENTS
SECTION 050505 -BEVEL RAIL ENDS PART 1- GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the contract, including General and Supplementary Conditions and Division 01 Specification Sections
More informationInstallation & Operating Manual. iwap202
Installation & Operating Manual iwap202 This page is intentionally left blank. Document Number 409345 (based on 407655) (See Last Page for Revision Details) For warranty information, refer to Terms and
More informationSECTION METAL FABRICATIONS
SECTION 05100 PART 1 - GENERAL 1.01 DESCRIPTION A. Section includes specifications for metal fabrications, including minimum requirements for fabricator, and galvanizing. 1.02 REFERENCE STANDARDS A. ASTM
More informationNotes. Modifications and constructional corrections arising particularly from technological development excepted.
Notes Our service staff and application en gineers will be pleased to offer you their assistance to answer your questions or to work out in cooperation with you specific solutions with the aid of our own
More informationthoroughly tried and tested! EWE Tapping Valves A single system for all types of pipes
thoroughly tried and tested! EWE Tapping Valves A single system for all types of pipes www.ewe-armaturen.de EWE Tapping Fittings high-quality products from Germany EWE tapping fittings are the product
More informationMEDIUM DUTY CAST IRON SLIDE GATES SERIES 20-10C
MEDIUM DUTY CAST IRON SLIDE GATES SERIES 20-10C Revised October 2007 Armtec reserves the right to alter designs. General The Armtec Sluice Gate is a quality and highly economical gate for a variety of
More informationLimited Warranty And Exclusive Remedy
Limited Warranty And Exclusive Remedy THE WORLD LEADER Deepak Fasteners Ltd., through its Unbrako Division and associated companies, warrants that these products conform to industry standards specified
More informationChemical composition. Type 2 as per F568: C ( ); P (max 0.048); S (max 0.058); Mn (min 0.74); B (min );
BS EN 14399 HIGH STRENGTH STRUCTURAL BOLTING FOR PRE LOAD Direct comparison as an alternative to ASTM HSFG Bolts ASTM A325M Type 1, ASTM A490M Type 1 or 2 BS EN 14399-3:2005 Grade 8.8 and 10.9 Chemical
More informationSECTION BULLET- RESISTANT DOORS
1 SECTION 08 3950 BULLET- RESISTANT DOORS PART 1- GENERAL 1.01 SUMMARY A. This Section Includes: 1. Bullet- resistant steel door and frame systems. 2. Door hardware for bullet- resistant steel door and
More informationOne-sided rack, hot-dip galvanized Space between bicycles 350 mm length approx.kg Part-No. Two-sided rack, hot-dip galvanized
Bicycle rack Sturdy and space-saving due to alternating high and low racks. Racks can be bolted to form a serial system, with boreholes for anchoring or plugging. Bicycle parking rack Frame of angular
More information4-Port Antenna Frequency Range Dual Polarization HPBW Adjust. Electr. DT
4-Port Antenna Frequency Range Dual Polarization HPB Adjust. Electr. DT R1 790 960 0 10 2 8 set by hand or by optional RCU (Remote Control Unit) X 65 Y1 1710 2690 X 65 4-Port Antenna 790 960/1710 2690
More informationSPECIFICATION FOR HIGH STRENGTH STRUCTURAL BOLTS
UDC 621.882.211 [669.14.018.291] IS : 3757-1985 (Reaffirmed 2003) Edition 3.2 (1989-07) Indian Standard SPECIFICATION FOR HIGH STRENGTH STRUCTURAL BOLTS ( Second Revision ) (Incorporating Amendment Nos.
More informationCOMBINED METERING TRANSFORMERS (OUT DOOR TYPE) FOR 11kV & 33kV SYSTEMS
006: 2008 CEB SPECIFICATION COMBINED METERING TRANSFORMERS (OUT DOOR TYPE) FOR 11kV & 33kV SYSTEMS CEYLON ELECTRICITY BOARD SRI LANKA Specification for COMBINED METERING TRANSFORMERS (OUTDOOR TYPE) FOR
More informationAS/NZS 1214:2016 Hot-dip galvanized coatings on threaded fasteners (ISO metric coarse thread series) AS/NZS 1214:2016
(ISO 10684:2004, MOD) Australian/New Zealand Standard Hot-dip galvanized coatings on threaded fasteners (ISO metric coarse thread series) AS/NZS 1214:2016 This joint Australian/New Zealand standard was
More informationGround Clamps Cable Tray
commercial and industrial fittings: ing Fittings and Solderless Connectors Clamps Cable Tray Terminates ground wire to cable tray. For aluminum or copper conductors. 1 4 hex wrench tightens both tray and
More information36kV VOLTAGE TRANSFORMERS (OUTDOOR TYPE)
CEB STANDARD 022 : 1994 Specification for 36kV VOLTAGE TRANSFORMERS (OUTDOOR TYPE) CEYLON ELECTRICITY BOARD SRI LANKA Specification for 36kV VOLTAGE TRANSFORMERS (OUTDOOR TYPE) CEB Standard 022 : 1994
More informationBIS UltraProtect 1000 I 1. Support system. BIS UltraProtect For indoor and outdoor use. walraven.com
BIS UltraProtect 1000 I 1 Support system BIS UltraProtect 1000 For indoor and outdoor use BIS UltraProtect 1000 Support system For indoor and outdoor use Optimal protection Better than hot dip galvanizing
More informationPORTABLE UNITS BASKETBALL SCHELDE SUPER SAM MULTI-ADJUST
PORTABLE UNITS SCHELDE SUPER SAM MULTI-ADJUST Highest class unit with regulated projection (within range of 245-325 cm) equipped with SAM (Spring Assisted Mechanism) - unique solution which avails to set
More informationFRP GATES MM08 FRP GATES Rev. 3 COMPOSITE SOLUTION PAGE 1
FRP GATES MM08 08.02.2016 Rev. 3 FRP GATES COMPOSITE SOLUTION PAGE 1 SUMMARY 1. USES AND CHARACTERISTICS... 3 2. EMPLOYMENT FIELDS... 4 3. MATERIALS... 5 3.1 TABLE OF PROFILES AND STRUCTURAL ACCESSORIES...
More information6-Port Antenna Frequency Range Dual Polarization HPBW Adjust. Electr. DT set by hand or by optional RCU (Remote Control Unit)
6-Port Antenna Frequency Range Dual Polarization HPBW Adjust. Electr. DT R1 698 960 1710 2690 1710 2690 1.5 10 0 10 2 10 set by hand or by optional RCU (Remote Control Unit) X Y1 X Y2 65 65 65 X 6-Port
More informationGrating Design and functionality
Grating Design and functionality link: www.nuovadefim.com/en/content/download-area CE Certified NO. 0948-CPR-0287 POTISSIMUM ELECTRO-WELDED_ P. 20 Potissimum for Residential applications RROTTO_ P. 22
More informationINSTRUMENT MOUNTING STANDS PRODUCT CATALOG Continuous Tray Support System for Instrumentation and Controls
INSTRUMENT MOUNTING STANDS PRODUCT CATALOG Continuous Tray Support System for Instrumentation and Controls James C. White Company, Inc. Greenville, SC PAGE 5 Standard Instrument Stands SINGLE WALL STAND
More informationtechnical data air conditioning systems BS box BSVQ-PV1
technical data BS box BSVQ-PV1 air conditioning systems BS box BSVQ100-250PV1 TABLE OF CONTENTS BSVQ100-250PV1 1 Specifications....................................................... 2 Technical Specifications.............................................
More informationPIPE/CONDUIT SUPPORTS
PIPE/CONDUIT SUPPORTS Pipe/Conduit Clamps...102-105 Unicushion... 106 Pipe & Tubing (Cush-A-Clamp ) Clamps...107-110 Pipe Hangers... 111 Pipe Rollers...111-112 Pipe Brackets... 113 Reference Tables...114-120
More informationbrühl safety fence systems safety fence systems BRÜHL Safety fence systems
brühl safety fence systems 23 safety fence systems BRÜHL Safety fence systems 24 brühl safety fence systems The optimal safety fence system for every application Twenty-five years of experience and progress
More informationScheduling, dimensioning, bending and cutting of steel reinforcement for concrete Specification
BRITISH STANDARD BS 8666:2005 Incorporating Amendment No. 1 Scheduling, dimensioning, bending and cutting of steel reinforcement for concrete Specification ICS 77.140.15; 91:080.40 Committees responsible
More informationPIP STF05121 Anchor Fabrication and Installation Into Concrete
June 2017 Structural PIP STF05121 Anchor Fabrication and Installation Into Concrete PURPOSE AND USE OF PROCESS INDUSTRY PRACTICES In an effort to minimize the cost of process industry facilities, this
More informationEuropean Technical Assessment ETA 15/0029 of 12/06/2017
RISE Research Institutes of Sweden AB RISE Certifiering Box 553 SE-371 23 Karlskrona Sweden Member of www.eota.eu Tel: +46 10 516 63 00 Web: www.ri.se Mail: certifiering@ri.se European of 12/06/2017 General
More information012: 2015 CEB SPECIFICATION GALVANIZED STEEL WIRE (EXCEPT SHIELDING WIRE FOR TOWER LINE APPLICATION)
012: 2015 CEB SPECIFICATION GALVANIZED STEEL WIRE (EXCEPT SHIELDING WIRE FOR TOWER LINE APPLICATION) CEYLON ELECTRICITY BOARD SRI LANKA Telephone: +94 11 232 8051 Fax: +94 11 232 5387 CONTENTS Page 1.0
More informationFXL-168 FIXED RACK ASSEMBLY INSTRUCTIONS SALES ORDER #
ZOMEWORKS FXL-168 FIXED RACK ASSEMBLY INSTRUCTIONS SALES ORDER # 1 1011 Sawmill Road NW, PO Box 25805, Albuquerque, NM 87125 USA (505) 242-5354 / (800) 279-6342 / FAX (505) 243-5187 E-mail: zomework@zomeworks.com
More informationMission Statement. State Steel strives to provide quality products and services at competitive
Mission Statement State Steel strives to provide quality products and services at competitive prices. This commitment is demonstrated with several branch locations all offering large, diverse inventories
More informationAPPENDIX FENCE GENERAL NOTES
APPENDIX FENCE GENERAL NOTES 1. Fabric: 9 gage, 2" mesh, knuckle top and bottom, placed on the outside of posts, single fabric width for the entire height. 2. All fencing to be standard galvanized finish.
More informationMOUNTING INSTRUCTIONS CONCRETE PURLIN BRACKET
CONCRETE PURLIN BRACKET VERSION MARCH 2015 GENERAL INSTRUCTIONS Safety: Systems may only be installed and operated by properly trained and technically suitable people (i.e. MCS accredited installers).
More informationSecurifor Polyester Coated Welded Mesh Panels
1 Scope This specification specifies requirements for panels made out of galvanised steel wires, welded and subsequently polyester coated for fencing. The panels are used for fencing, schools, public buildings,
More informationHex Cap Screws Coarse & Fine Thread
INDUSTRIAL Product Description Hex head cap screws are manufactured to dimensional standards of ASME B18.2.1 and to various material and mechanical standards of ASTM and SAE. The length of a cap screw
More informationINSTALLATION INSTRUCTION RRU DOUBLE LIGHT POLE MOUNT
INSTALLATION INSTRUCTION RRU Double Light Pole Mount for installation of two RRU units on mast, towers or other vertical structures. CUE DEE YOUR INNOVATIVE PARTNER 1 CONTENTS 1. PRODUCT COVERED IN THIS
More informationCollins Engineers Palmetto Islands County Park Boardwalk Repairs 03/28/2014 SECTION ROUGH CARPENTRY
PART 1 GENERAL 1.1 RELATED SECTIONS SECTION 061000 ROUGH CARPENTRY A. Drawings and general provisions of the Construction Contract, including General Conditions and Division 1 Specification Sections, apply
More informationKhathij Industrial Fasteners
Dear Sir/Madam, Khathij Industrial Fasteners This is Saqubar Sadique representing 'KHATHIJ INDUSTRIAL FASTENERS' from Chennai, India. We 'Khathij industrial fasteners' like to introduce us as a Stockist
More informationNPS/001/010 Technical Specification for Fasteners and Fixings for Wood Pole Overhead Lines and General Construction Works
Version:- 4.0 Date of Issue:- August 2014 Page 1 of 13 NPS/001/010 Technical Specification for Fasteners and Fixings for Wood Pole Overhead Lines and General Construction Works 1. Purpose The purpose of
More informationPRODUCT CATALOGUE and PRICE LIST 2015
M E T A L A P P L I C A T I O N S PRODUCT CATALOGUE and PRICE LIST 5 G r a t i n g s f o r i n d u s t r y, l o g i s t i c s a n d a r c h i t e c t u r e For metal professionals who want to accomplish
More informationSECTION CABLE TRAYS FOR COMMUNICATIONS SYSTEMS
SECTION 270536 - CABLE TRAYS FOR COMMUNICATIONS SYSTEMS PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division
More informationRe-Grab Safety Gate. These industrial safety gates come pre-assembled and are easily installed.
Manufactured from durable and corrosive resistant polyurethane, the RE-GRAB Safety Gate will not corrode or degrade even in aggressive chemical environments. They are self-extinguishing to UL94 and are
More informationGENERAL INSTALLATION GUIDE: WARRANTY: PRODUCT INFORMATION T F
GENERAL INSTALLATION GUIDE: Unless otherwise indicated, all Seven Oaks M.U. Architectural Products materials are to be used for decorative purposes only. All products must be installed using ample amount
More informationSuperstrut. Metal Framing. Beam Clamps. Design Loads. Finishes and Special Materials
Loads Where design loads are indicated, they provide for a safety factor of 3 in conformance with the merican Standard Code for Pressure Piping. For more information, see page 57 for Engineering Data and
More informationISO INTERNATIONAL STANDARD. Fasteners Hot dip galvanized coatings. Éléments de fixation Revêtements de galvanisation à chaud
INTERNATIONAL STANDARD ISO 10684 First edition 2004-07-15 Fasteners Hot dip galvanized coatings Éléments de fixation Revêtements de galvanisation à chaud Reference number ISO 10684:2004(E) ISO 2004 PDF
More information21. HOT-DIP GALVANIZED COATING GUARANTEES
21. HOT-DIP GALVANIZED COATING GUARANTEES INTRODUCTION Asset owners are becoming increasingly aware of the need to prolong the maintenance-free life of their buildings, plant and equipment. This has led
More information4-Port Antenna Frequency Range Dual Polarization HPBW Adjust. Electr. DT
4-Port Antenna Frequency Range Dual Polarization HPB Adjust. Electr. DT R1 790 960 0.5 9.5 0 6 set by hand or by optional RCU (Remote Control Unit) X 65 B1 1710 2180 X 65 4-Port Antenna 790 960/1710 2180
More informationPanel fencing system 2D 6/5/6
tel.: +8 7 2 2 mobile: +8 09 9 e-mail: kontakt@ Panel fencing system 2D // fencing panels tel.: +8 7 2 2 mobile: +8 09 9 e-mail: kontakt@ type 2D H H Panel height 0 80 00 20 0 0 80 200 220 20 Horizontal
More informationEuropean Technical Approval ETA-10/0413
ETA-Danmark A/S Kollegievej 6 DK-2920 Charlottenlund Tel. +45 72 24 59 00 Fax +45 72 24 59 04 Internet www.etadanmark.dk Authorised and notified according to Article 10 of the Council Directive 89/106/EEC
More informationflexible couplings for pipe connections with axial restraint
www.arpol.com A R P O L F I X flexible couplings for pipe connections with axial restraint 1 TABLE OF CONTENTS Advantages & installation Sealing & anchoring system 4 5 Nominal charts 6 Material specifications
More informationAftermarket services, spares and retrofit. World-class support for world-leading variable pitch axial fans
Aftermarket services, spares and retrofit World-class support for world-leading variable pitch axial fans Your choice of axial flow fan equipment is a significant investment. Only L&T Howden spares, services
More informationPharma Temperature Sensor G3/8"
SENSORS FOR FOOD AND BIOPHARMA. Product Information TFP-58P, -68P, -168P, -188P PHARMA Pharma Temperature Sensor G3/8" Application/Specified usage Aseptic temperature measurement, inline, high precise
More informationWATERFLUX 3000 Quick Start
WATERFLUX 3000 Quick Start Electromagnetic flow sensor The documentation is only complete when used in combination with the relevant documentation for the signal converter. KROHNE CONTENTS WATERFLUX 3000
More information015 : 1993 CEB STANDARD
015 : 1993 CEB STANDARD UNGALVANIZED STAY ASSEMBLIES CEYLON ELECTRICITY BOARD SRI LANKA Specification for UNGALVANIZED STAY ASSEMBLIES CEB Standard 015 : 1993 CEYLON ELECTRICITY BOARD No. 50, Sir Chittampalam
More informationDesign for Manufacturability Guide
Design for Manufacturability Guide WHO WE ARE Short-to-medium run metal stamping manufacturer Annual volume of 250 to 300,000 per part number We serve a very diversified mix of customers & markets Our
More informationMechanical Support Systems, Inc.
Mechanical Support Systems, Inc. CATALOG February, 2014 www.thesmartsupports.com 408.601.0155 1 N E W W E B S I T E.N E W P R O D U C T S Mechanical Support Systems, Inc. is certified as a women s business
More informationISO INTERNATIONAL STANDARD. Welding Studs and ceramic ferrules for arc stud welding
INTERNATIONAL STANDARD ISO 13918 Second edition 2008-02-15 Welding Studs and ceramic ferrules for arc stud welding Soudage Goujons et bagues céramiques pour le soudage à l'arc des goujons Reference number
More informationSECTION SITE FURNISHINGS FOR CFCRT. 1. American Society for Testing and Materials (ASTM).
PART 1 - GENERAL 1.1 SECTION INCLUDES A. Benches. B. Trash receptacles. C. Bike storage. 1.2 REFERENCE STANDARDS A. Including but not limited to: 1. American Society for Testing and Materials (ASTM). 1.3
More informationManufacturing Instructions
May 2016 Manufacturing Instructions Assembly and disassembly SN 200-6 ICS 25.020 Dimensions in mm Supersedes SN 200-6:2010-09 Table of contents Page 1 Scope... 1 2 Normative references... 1 3 Terms and
More informationISO INTERNATIONAL STANDARD. Fasteners Hot dip galvanized coatings. Éléments de fixation Revêtements de galvanisation à chaud
Provläsningsexemplar / Preview INTERNATIONAL STANDARD ISO 10684 First edition 2004-07-15 Fasteners Hot dip galvanized coatings Éléments de fixation Revêtements de galvanisation à chaud Reference number
More informationWELDA FASTENING PLATES
FASTENING PLATES Author: Markus Junes, M. Sc. Civ. Eng. R&D Manager, Peikko Group 1. INTRODUCTION Peikko Group has launched a new family of Fastening Plate products with resistances calculated on the basis
More informationScaffolding ACCESSORIES
Scaffolding ACCESSORIES INITIA COMPONENTS FIXED BASE For flat surfaces. With holes in the spigot for attaching the cradle head. The reinforced base plate has a thickness of 5 mm and a surface area of 120
More informationERECTION & CONSTRUCTION
ERECTION & CONSTRUCTION High Strength Structural Bolting Author: Clark Hyland Affiliation: Steel Construction New Zealand Inc. Date: 24 th August 2007 Ref.: Key Words High Strength Bolts; Property Class
More informationWATERFLUX 3000 Quick Start
WATERFLUX 3000 Quick Start Electromagnetic flowmeter The documentation is only complete when used in combination with the relevant documentation for the signal converter. KROHNE CONTENTS WATERFLUX 3000
More informationDECKS. Stairway illumination Positive attachment of ledger Lateral load connection required board (R507.2) required (R ) (R311.7.
DECKS Max. riser height-7 ¾ Min. tread depth-10 Landings required at (R311.7.5.1) (R311.7.5.2) top and bottom of stairs (R311.7.6) Notched guardrail post NOT allowed Graspable handrail required Spacing
More informationSECTION CABLE TRAYS
SECTION 16139 CABLE TRAYS PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 1 Specification Sections,
More information2-Port Antenna Frequency Range Dual Polarization HPBW Adjust. Electr. DT Enhanced Sidelobe Suppression
2-Port Antenna Frequency Range Dual Polarization HPBW Adjust. Electr. DT Enhanced Sidelobe Suppression 1710 2690 18 Downtilt set by hand or by optional RCU (Remote Control Unit) X 65 2 14 2-Port Antenna
More informationSeTTINg a new standard
0 u r Q U A L I T Y c o m e s T H r o u g h SCRE ENS SeTTINg a new standard for screen quality. There are two key aspects that make Delta Screens unique manufacturing expertise and experience. These create
More informationCABLE TRAYS & STRUTS CATALOUGE
CABLE TRAYS & STRUTS CATALOUGE We are the Manufacturer for Copper Bonded Ground Rod and Contract Manufacturing Company for other products made from Brass, Copper, Gunmetal, Bronze, Cast Iron, Malleable
More informationKWS Handrail Systems. Architectural Hardware
KWS Handrail Systems Architectural Hardware Technical Information KWS Handrail-Systems - the flexible solution System for handrails in stainless steel and timber Completely pre-assembled or single components
More informationResistance thermometers for process technology
Data Sheet 90.2820 Page 1/8 Resistance thermometers for process technology for temperatures from -200 to +600 C with protection tubes in stainless steel, titanium, tantalum, Iconel and Hastelloy available
More informationPART MATERIALS. Section Fencing Materials. Description
PART 03000 - MATERIALS Section 03010 - Fencing Materials Description 03010.00 Scope - This section consists of the test requirements, specifications and tolerances for barbed wire, woven wire and chain
More informationASSEMBLY INSTRUCTIONS. Construction type approved Reg. no S819 F ENERGY AND SANITARY SYSTEMS
Heliostar 252 S4 and 218 S4 FREE-STANDING INSTALLATION vertical ASSEMBLY INSTRUCTIONS Construction type approved Reg. no. 011-7S819 F ENERGY AND SANITARY SYSTEMS Safety instructions Safety instructions
More informationMATERIAL AND EQUIPMENT STANDARD FOR METRIC TYPE FASTENERS (SCREWS, BOLTS, STUDS, NUTS AND WASHERS) ORIGINAL EDITION DEC. 1997
MATERIAL AND EQUIPMENT STANDARD FOR METRIC TYPE FASTENERS (SCREWS, BOLTS, STUDS, NUTS AND WASHERS) ORIGINAL EDITION DEC. 1997 This Standard is the property of Iranian Ministry of Petroleum. All rights
More informationTECHNICAL CORRECTION October Process Industry Practices Structural. PIP STF05121 Fabrication and Installation of Anchor Bolts
TECHNICAL CORRECTION October 2006 Process Industry Practices Structural PIP STF05121 Fabrication and Installation of Anchor Bolts PURPOSE AND USE OF PROCESS INDUSTRY PRACTICES In an effort to minimize
More informationOil tempered SiCrV-alloyed high tensile valve spring wire
OTEVA 75 SC, OTEVA 75 SC 1/5 PLUS Oil tempered SiCrV-alloyed high tensile valve spring wire OTEVA 75 SC is a Super Clean steel, especially intended for the manufacture of clutch/ transmission springs with
More informationREISSER-Schraubentechnik GmbH THE RELIABLE CONNECTION
REISSER-Schraubentechnik GmbH THE RELIABLE CONNECTION REISSER-Schraubentechnik GmbH // Production and company headquarters in Ingelfingen Criesbach Fritz-Müller-Str. 10 74653 Ingelfingen Criesbach Germany
More informationStandard program overview Steel smoke-proof doors
Smoke-proof doors Standard program overview Steel smoke-proof doors Pos. Product 1 RS-1 Steel door (thin rebated) Smoke-proof door in accordance EN 1634-3 / DIN 18095 Dimensions W 625-1350 H 1750-2500
More informationTimber fasteners for structural use
TECHNICAL INFORMATION TIMBER FASTENERS FOR STRUCTURAL USE TESTING AND CERTIFICATION TI-17 V1 Timber fasteners for structural use Testing and certification 01 INTRODUCTION Timber fasteners for structural
More information