5QL1030-AL Qwik-Lok Product Information PRODUCT INFO SYSTEM 5

Transcription

1 PRODUCT INFO 1030 Qwik-Lok Product Information Revised: 06-NOV-06 Document: Page 1 of 9

2 SPRE PRTS * T-Wrench: 6mm MTWR10 * * Screwdriver MOUNTING Foundation * Round Plugs: 16mm RNDP-016-RD1-025 * Fixed Jaw Mounting Screws: M8x35 SHCS-M * QwikChange Dual Station Jaw Set 5DS Round Plugs: 14mm RNDP-014-RD1-025 B Round Pin...MPIN12R B Diamond Pin..MPIN12D & B Set...MPIN12S Faceplate Round & Diamond Pins (Included w/ Faceplate purchase) 5PIN14S * Locating Pin LPIN * Locating Bushing 5LCB10 * Coverplate 5CP1030-ST * Slide ssembly 5SS1030 (See breakdown page 4) * Handle Guide 5HDG10 * Ejector Bushing 5EJB10 * Base Mounting Screws: M12x35 LHCS-M * Rear Seal Plug RRSP-100-RD1-001 * Label: CHICK Logo 5LBL T-Slotted Table Toe Clamps Bottom of Base Bolt and T-Nut supplied by customer Locating Keys Inch Size MKE500 (1/2 ) MKE562 (9/16 ) MKE625 (5/8 ) MKE688 (11/16 ) MKE750 (3/4 ) MKE812 (13/16 ) Metric Size MKE10 (10mm) MKE12 (12mm) MKE14X18 (14mm) MKE16 (16mm) MKE20 (20mm) Handle Seal Plug * HDSP-100-RD1-001 (Red) HDSP-100-WH1-001 (White) * Qwik-Lok Base 5BS1030-L * Swivel Handle 5SWH10 * Locating Bushing: 12mmx18mmx12mm For QwikChange Jaw accessories, see pages 2-3 * Included in a standard 1030 Qwik-Lok Revised: 06-NOV-06 Document: Page 2 of 9

3 CCESSORY SETS Faceplate Round & Diamond Pin Set * 5PIN14S Machinable Faceplates Single Station Machinable Jaw Sets 5FP FP FP SS SS FP SS SS Coverplate Dual Station Machinable Jaw Sets 5DS DS Conversion Faceplate 5DS DS Grippers Gripper #3 Plain Serrated (L-9mm x W-9mm x T-8mm) Gripper #4 Plain Serrated (L-12mm x W-12mm x T-4.6mm) Gripper #5 Plain Serrated (L-15mm x W-15mm x T-5mm) Gripper #6 Plain Serrated (L-19mm x W-19mm x T-6mm) Horizontal (6 Systems) 5CF H 5CP1030-ST Grey item is included with a standard system Revised: 06-NOV-06 Document: Page 3 of 9

4 INDIVIDUL CCESSORIES QwikChange Machinable Dual Station Jaws QwikChange Machinable Single Station Jaws Screws and Plugs Dual Station * Round Plugs: 16mm RNDP-016-RD1-025 * Fixed Jaw Mounting Screws: M8x35 SHCS-M Individual Dual Station Jaws Moveable Jaw... 5MJ (W99mm, H40mm, L105mm) B Fixed Jaw... 5FJ (W99mm, H40mm, L70mm) Moveable Jaw... 5MJ (W148mm, H40mm, L105mm) B Fixed Jaw... 5FJ (W148mm, H40mm, L70mm) Moveable Jaw... 5MJ (W99mm, H55mm, L105mm) B Fixed Jaw... 5FJ (W99mm, H55mm, L70mm) Moveable Jaw... 5MJ (W148mm, H55mm, L105mm) B Fixed Jaw... 5FJ (W148mm, H55mm, L70mm) Individual Single Station Jaws Moveable Jaw... 5MJ (W99mm, H40mm, L105mm) B Fixed Jaw... 5SJ (W99mm, H40mm, L105mm) Moveable Jaw... 5MJ (W148mm, H40mm, L105mm) B Fixed Jaw... 5SJ (W148mm, H40mm, L105mm) Moveable Jaw... 5MJ (W99mm, H55mm, L105mm) B Fixed Jaw... 5SJ (W99mm, H55mm, L105mm) Moveable Jaw... 5MJ (W148mm, H55mm, L105mm) B Fixed Jaw... 5SJ (W148mm, H55mm, L105mm) Single Station * Round Plugs: 16mm RNDP-016-RD1-025 * Fixed Jaw Mounting Screws: M8x35 SHCS-M * Round Plugs: 14mm RNDP-014-RD1-025 Faceplate Round & Diamond Pin Set (Included w/ Faceplate purchase) 5PIN14S Required for both Machinable and Conversion Faceplates. Grey item is included with a standard system Revised: 06-NOV-06 Document: Page 4 of 9

5 SLIDE SSEMBLY Complete Slide ssembly 5SS1030 Screw 5SCR10 Slide Rebuild Kit 1-3 5SRK10 Slide Left Hand Nut 5SLN10 Hex Coupler 5HXC1030 Retaing Ring 5RRG10 1 U-Cup Seals - LH Nut 5USL10 2 Slide Right Hand Nut 5SRN10 Third Hand Screw 5THS10 Clamping Block 5CLB10 U-Cup Seals - RH Nut 5USR10 3 Revised: 06-NOV-06 Document: Page 5 of 9

6 DIMENSIONS 99 (3.90) 105 (4.13) 70 (2.76) 10 (.39) 40 (1.57) 13 (.51) 95 (3.74) U. S. Patent Nos. 4,529,183 5,022,636 5,442,844 5,623,754 5,713,118 5,921,534 Made in U.S Keystone Drive Warrendale, P 15086,U.S.. Tel: (724) CHICK 16 (.63) 300 (11.81) 100 (3.94) 5 (.20) PPROX TOE CLMP RIL FOR USE WITH CHICK TOE CLMPS ORDER NUMBER (9.84) 150 (5.91) 70 (2.76) LOCTING HOLES Ø ±0.007 (.4727)X 15 (.039)DP 4 PLCES MOUNTING HOLES FOR M12 SOCKET-HED CP SCREWS 2 PLCES Dimensions are in mm (inches) Dimensions include standard Dual Station Machinable Jaw Sets. System weight: 9kg. (19lbs.) Revised: 06-NOV-06 Document: Page 6 of 9

7 MCHINBLE RE Dual Station Single Station 105 (4.13) 70 (2.76) 105 (4.13) 17 (.67) 105 (4.13) 68(2.67) 17.5 (.69) 10 (.39) 105(4.13) 70 (2.76) C C 30* (1.18) 16 (.63) 70 * (2.76) 40 (1.57)* 70(2.76)* 60 (2.36) 22.5 (.89) 35 (1.38) D - JW POCKET D 50 (1.97) Ø 18 (.71) 17 (.67) B B 17 (.67) 14.7 (.58) 17 (.67) 17 (.67) 300 (11.81) Item Number Description B C D 5DS (3.90) 40 (1.57) 34.5 (1.36) 14.5 (.57) 5DS (3.90) 55 (2.17) 34.5 (1.36) 14.5 (.57) 5DS (5.83) 40 (1.57) 59 (2.32) 39 (1.54) 5DS (5.83) 55 (2.17) 59 (2.32) 39 (1.54) Item Number Description B C D 5SS (3.90) 40 (1.57) 29.5 (1.16) 14.5 (.57) 5SS (3.90) 55 (2.17) 29.5 (1.16) 14.5 (.57) 5SS (5.83) 40 (1.57) 54 (2.13) 39 (1.54) 5SS (5.83) 55 (2.17) 54 (2.13) 39 (1.54) Grey area indicates no cut zone ll dimensions are MM [IN] Dimensions centered on the dimension. Revised: 06-NOV-06 Document: Page 7 of 9

8 HOLDING CPCITY Dual Station Single Station ( 105) 78 (105) DUL STTION JW SET, FULLY CLOSED SINGLE STTION JW SET, FULLY CLOSED ( 105) 91 (105) MX HOLDING CPCITY ND MCHINBLE RE 22 MX HOLDING CPCITY ND MCHINBLE RE DUL STTION JW SET, FULLY OPEN SINGLE STTION JW SET, FULLY OPEN Item Number Description Jaw Width 5DS (1.02) 99 (3.90) 5DS (1.61) 99 (3.90) 5DS (1.02) 148 (5.83) 5DS (1.61) 148 (5.83) Item Number Description Jaw Width 5DS (1.02) 99 (3.90) 5DS (1.61) 99 (3.90) 5DS (1.02) 148 (5.83) 5DS (1.61) 148 (5.83) ll dimensions are MM [IN] * dditional closure is available with an Extended Travel Coverplate. Revised: 06-NOV-06 Document: Page 8 of 9

9 CLMPING FORCE Pounds (lbs) Kilo Newtons (kn) Force = Torque X Slope lbs = in-lb x 8.0 lbs = ft-lbs x 96 Torque Force (ft-lb) (lbs) Force = Torque X Slope N = N-m x 315 kn = N-m x Torque Force (N-m) (kn) Clamping Force (lbs) Torque (ft-lbs) Clamping Force (kn) Torque (N-m) Note: Maximum Recommended Torque. ctual results may vary. Note: Maximum Recommended Torque. ctual results may vary. Revised: 06-NOV-06 Document: Page 9 of 9