Product Information Packet

Size: px
Start display at page:

Download "Product Information Packet"

Transcription

1 Product Information Packet Multi-Lok 6 Inch 4 Sided: March 3, 00 When the E Series product line was introduced, it was a best-in-industry choice for workholding. Over the years, Chick has built on that success, employing new manufacturing technologies, incorporating customer feedback, and continuing to work every day to support our mission of efficiency through workholding innovation. As the vast majority of our customers have experienced, the System line for batch production and the One-Lok TM CNC Vise one-off production offer even greater benefits in versatility, speed, strength, and efficiency than older Chick systems. Therefore, as of March 3, 00, no new complete E Series workholding systems will be sold. Qwik-Lok Manual Qwik-Lok Hydraulic Multi-Lok Specialty Multi-Lok QL6 QL6-S QL6H Bi-Lok Manual Bi-Lok Hydraulic BL6 BL6-S BL6-QC BL6-H BL6H-QC ML6A08 ML6A08-LP ML6B ML6B6 Chick will continue to support E Series customers with spare parts and accessories. While most E Series parts will continue to be a stocked item (see red circles on following pages), some items will not be stocked. These items will be available in one of the following ways: Items marked by a gray circle will be available only while supplies last. For example, bases will be available while we have the material and machines to make them. During this time, we will make sure that we have all of the items to be able to assemble the bases complete. However, when the material runs out, we will no longer offer these items. Made-to-order Items marked by a yellow circle (e.g., faceplates, jaw carriers, high jaws) will no longer be inventoried but will NOT be retired at this time. Instead, in an effort to support our customers, they will be available on a made-to-order basis. Note: Made-to-order items will require a $8 setup fee on every order (including repeat orders) regardless of quantity ordered and a minimum two-week delivery.

2 6 Bi-Lok Spare Parts and Accessories Overview 0 RNDP-37-RD-0 Hydraulic manifold plate plugs (qty ) Slide assembly SP-SAS6 Manual aluminum SP-SAS6-H Hydraulic SP-CVR6 Cover set 4 SP-JP6 Jaw pin (includes jaw pin, O-ring) JC6L-0 QwikChange TM jaw carrier set SP-BAS-BL6 Bi-Lok base 4 HS6 Swivel handle 3 LHCS Handle seal plate mounting screws Handle seal plate /6 SP-WA6 Stop washer & stop washer screw ( sets) 3 7 RNDP-6-RD-0 Round plugs (qty ) 8 ELBL--07 Label (qty 4) Hydraulic manifold plate (includes mounting screws & plugs) SP-JPK Jaw pin knob (only) 6 PE-. Pin extractor 7 SHCS Fixed jaw mounting screws (qty ) 8 SP-TWR6 T-wrench ChickWorkholding.com

3 3 6 Qwik-Lok Spare Parts Overview Locating bushing (qty 4) RNDP-37-BL-0 Hydraulic manifold plate plugs (qty ) Slide assembly 8 3 SP-SAS6 Manual aluminum 3 SP-SAS6-H Hydraulic 0 4 SP-CVR6 Cover set JQ6L-00AL-0 QwikChange TM dual station jaw (standard only) 6 SP-JP6 Jaw pin (includes jaw pin, O-ring) 7 6 SP-BAS-QL6 Qwik-Lok base HS6 Swivel handle 3 LHCS Handle seal plate mounting screws (qty ) Handle seal plate /6 SP-WA6 Stop washer & stop washer screw ( sets) 7 RNDP-6-RD-0 Round plugs (qty ) 8 RNDP-0-RD-0 Round plugs (qty ) 0 ELBL--08 Label Hydraulic manifold plate (includes mounting screws & plugs) 7 SP-JPK Jaw pin knob (only) 8 PE-. Pin extractor SHCS Fixed jaw mounting screws (qty ) 0 SP-TWR6 T-wrench ChickWorkholding.com

4 4 6 Multi-Lok Spare Parts and Accessories Overview Locating bushing (qty 4) Slide assembly 7 SP-SAS6 Manual Slide assembly SP-CVR6 Cover set 0 JQ6L-00AL-0 QwikChange dual station jaw set (standard only) SP-JP6 Jaw pin (includes jaw pin, O-ring) Multi-Lok column SP-CLM6A 4 Low Profile SP-CLM6B 4 Standard ELBL--0 Label (qty 4) 3 SP-TP6 Top plate 4 LHCS Top plate mounting screws (qty ) 6 RNDP-0-RD-0 Round plugs (qty ) 8 HS6 Swivel handle SP-JPK Jaw pin knob (only) 3 PE-. Pin extractor 4 SHCS Fixed jaw mounting screws (qty ) SP-TWR6 T-wrench ChickWorkholding.com

5 6 QwikChange TM Accessories Overview JQ6L-00AL-0 QwikChange dual station jaw set (standard only) SP-JP6 Jaw pin (includes jaw pin, O-ring) 6 SP-CVR6 Cover set QwikChange dual station jaw set JQ6L-8XAL-0 Wide 3 JQ6L-300AL-0 High 4 Not Applicable for 6 QwikChange faceplate (standard) 8 FPQC6A-6XAL-0 Low Profile 8 FPQC6B-6XAL-0 Standard Height 6 7 QwikChange faceplate (wide) FPQC6A-8XAL-0 Low Profile FPQC6B-8XAL-0 Standard Height QwikChange jaw carrier set 0 JC6L Not Applicable for 6 7 SHCS Fixed jaw mounting screws (qty ) SHCS Fixed jaw carrier mounting screws (qty ) Hard jaw plates (A) JH6STD-0 Standard (Set of 4) (B) JH6THK-0 Thick (Set of ) 3 Hard jaw plate mounting screws /-3 by (A) LHCS /8 Long (qty 8) (B) SHCS /4 Long (qty 8) (C) SHCS /4 Long (qty 8) SHCS Soft jaw plate mounting screws (qty ) Single station end plate Bi-Lok Single station end plate Qwik-Lok Single station end plate 8 SP-JPK Jaw pin knob (only) JS46L-0 Soft jaw plate (set of 4) ChickWorkholding.com

6 6 6 SLIDE ASSEMBLY Spare Parts and Accessories Overview Slide Assembly, MANUAL Complete Slide Assembly -7 SP-SAS6 Standard -7 SP-SAS6-S Steel, 3, 4, 6- ESRK6 Slide Rebuild Kit SP-THS6 Third Hand Screw Clamping Block 3- EHWT6 Third Hand Hardware Kit 6 SP-CVR6 Cover Set (3 pieces) Ball Plunger O-Ring Seal - Large (Qty 4) Screw O-Ring Seal - Small (Qty 4) & 7 ESLD4 Slide U-Cup Seal (Qty 4) 0 & 7 ESNT4 Slide Nut Slide Assembly, HYDRAULIC -,, SP-SAS6-H Hydraulic Slide Assembly Compression Spring, -8,, ESRK6-H Slide Rebuild Kit Ball Plunger Hex Ring Hydraulic Clamping Block SP-THS6 Third Hand Screw 6-8 SP-HWT6 Third Hand Hardware Set (Qty ) SP-CVR6 Cover Set (3 pieces) Manifold Supply Tube 4 SHCS Manifold Plate Mounting Screws Hydraulic Manifold Plate Bi-Lok Qwik-Lok Hydraulic Slide Assy (Conversion Kit) -4 PC6-BL Bi-Lok Conversion Kit -4 PC6-QL Qwik-Lok Conversion Kit Hydraulic Slide Cap Screw & 0 SP6H-SLD Hydraulic Slide 3 & 0 SP6H-SNT Hydraulic Slide Nut Manifold Plate Plugs (Qty ) ChickWorkholding.com 0 3

7 Jaw Jaw SET UP E SERIES DUAL STATION SET-UP: SINGLE STATION SET-UP: Jaw Third Hand Mechanism Center Jaw Jaw Third Hand Mechanism. Design and machine QwikChange Machinable Jaws to interface with the workpieces, or install hard jaws. NOTE: All reference surfaces must be located on the Center Jaw. Loosen the screw on the Third Hand Mechanism with the T-wrench. 3. Slide Jaw (moving jaw at the rear end of system) far enough from the Center Jaw to fit the fi rst workpiece. 4. Insert the fi rst workpiece against the Center Jaw and slide Jaw toward the workpiece leaving a desired clearance. (Clearance range should fall between.00 to.0 ) NOTE: This clearance is set to ensure easy part removal when the system is unclamped, and will allow for variations in part size.. Tighten the screw on the Third Hand Mechanism until it bottoms. NOTE: Hand tightened screw only(3 Ft Lbs). Do not overtighten! 6. Remove the first workpiece. 7. Adjust Jaw (moving jaw at the operator s end of system) using the swivel wrench so that it is far enough from the Center Jaw to fi t the second workpiece. 8. Insert the second workpiece against the Center Jaw and tighten Jaw to contact the workpiece by turning the swivel wrench clockwise until Jaw just starts to move. NOTE: The moment Jaw moves, a spring force within the Third Hand Mechanism is activated. This force holds the second workpiece in place allowing both hands to be free so that Operation 8 can be accomplished.. Insert the fi rst workpiece and clamp in position by turning the swivel handle clockwise. When tightening use the wrench provided or a torque wrench. Do not use any cheater bars or hammers. Overtightening the screw can damage the system and lead to poor performance. NOTE: Due to the free-floating slide mechanism within the workholding system, this clamping action will not only clamp the first workpiece, it will also clamp the second workpiece with the same force. This equalization of the clamping force applied to both sides of the fixed Center Jaw will prevent the Center Jaw from deflecting.. Design and machine QwikChange Jaws to interface with the workpiece(s), or install hard jaws.. Bolt the endplate to near end of Qwik-Lok with four of the included socket head cap screws. NOTE: If setting up Multi-Lok skip step, since topplate is already bolted to the Multi-Lok column. 3. Loosen the screw on the Third Hand Mechanism with the T-wrench. NOTE: Adjustment of the Third Hand Mechanism screw is not necessary when the system is used in the single station mode. It should be left in the loose condition to allow free movement of Jaw. 4. Slide Jaw flush with the endplate and bolt Jaw to the endplate with two of the included socket head cap screws. NOTE: All reference surfaces must be located on Jaw and/or the Center Jaw. Use the swivel wrench to adjust Jaw to suit the workpiece. Turn the swivel wrench clockwise to clamp the workpiece. Notes CHICK WORKHOLDING SOLUTIONS, INC 00 Keystone Drive Warrendale, PA 086 USA Phone: (74) Fax: (74) Toll Free: (800) 33-CHICK (800) Revised: 06-NOV-06 Document: Page of

8 DIMENSIONS E SERIES.7.00 TOPPLATE THE /-3 FLAT HEAD SOCKET SCREW PROTECTS THE.800 Ø X 60 CENTERING HOLE USED WHEN THE MULTI-LOK SYSTEM IS ON AN INDEXER. THE SCREW CAN BE REPLACED WITH AN EYEBOLT FOR LIFTING IF NECESSARY.00 JAW SHADED AREAS ARE MACHINABLE FOR WORKPIECE CLAMPING AND LOCATING SURFACES. NOTES:.0 FIXED JAW JAW WITH CENTER JAW REMOVED FOR SINGLE STATION THE MAXIMUM JAW TRAVEL IS.0". MAXIMUM JAW MOVEMENT WITH CENTER JAW INSTALLED (AS SHOWN)." OPERATING CLAMPING FORCE OF 0 TO 0000 LBS. ACHIEVED AT A RATE OF APPROXIMATELY 000 LBS PER 0FT/LBS. OF TORQUE. ML6B MULTI-LOKS HAVE AN OVERALL HEIGHT OF.0" (WHEN USING THE STANDARD BASEPLATE) AND ARE SUPPLIED WITH (4) SETS OF JQ6L-00AL QWIKCHANGE MACHINABLE JAWS. THE STANDARD BASEPLATE IS 0.00" SQUARE AND HAS (8) MOUNTING HOLES FOR /8- BOLTS SPACED IN A SQUARE PATTERN WITH THE HOLES 00mm (3.37") APART. WEIGHT OF THE SYSTEM WITH STANDARD BASEPLATE IS 0 LBS SQ 0.00 SQ.0 THIRD HAND MECHANISM STANDARD BASEPLATE Notes CHICK WORKHOLDING SOLUTIONS, INC 00 Keystone Drive Warrendale, PA 086 USA Phone: (74) Fax: (74) Toll Free: (800) 33-CHICK (800) Revised: 06-NOV-06 Document: Page 6 of

9 MACHINABLE AREA.4 E SERIES Ø. Item Number Description A B JQ6L-00AL.00 High Jaws.0.00 JQ6L-300AL 3.00 High Jaws JQ6L-X8AL 8.00 Wide Jaws A B Notes Grey area indicates No Cut zone. CHICK WORKHOLDING SOLUTIONS, INC 00 Keystone Drive Warrendale, PA 086 USA Phone: (74) Fax: (74) Toll Free: (800) 33-CHICK (800) Revised: 06-NOV-06 Document: Page 7 of

10 JAW TRAVEL E SERIES STANDARD QWIKCHANGE FIXTURE JAWS END PLATE. TOTAL SLIDE TRAVEL AVAILABLE STANDARD JAWS WITHOUT CENTER JAW Notes CHICK WORKHOLDING SOLUTIONS, INC 00 Keystone Drive Warrendale, PA 086 USA Phone: (74) Fax: (74) Toll Free: (800) 33-CHICK (800) Revised: 06-NOV-06 Document: Page 8 of

11 CLAMPING FORCE E SERIES 6 Inch Units: DO NOT EXCEED 0 FT-LB 0, Clamping Force (lbs) Torque (ft-lbs) Notes CHICK WORKHOLDING SOLUTIONS, INC 00 Keystone Drive Warrendale, PA 086 USA Phone: (74) Fax: (74) Toll Free: (800) 33-CHICK (800) Revised: 06-NOV-06 Document: Page of

Product Information Packet

Product Information Packet Product Information Packet Hydraulic Qwik-Lok Inch: March, 0 When the E Series product line was introduced, it was a best-in-industry choice for workholding. Over the years, Chick has built on that success,

More information

Product Information Packet

Product Information Packet Product Information Packet Hydraulic Qwik-Lok Inch: March 3, 00 When the E Series product line was introduced, it was a best-in-industry choice for workholding. Over the years, Chick has built on that

More information

Product Information Packet

Product Information Packet Product Information Packet Multi-Lok: Retired March, 0 When the M System product line was introduced (as the metric conversion of the E Series line) it was a best-in-industry choice for workholding. Over

More information

Product Information Packet

Product Information Packet Product Information Packet 30 Qwik-Lok: Retired March 31, 20 When the M System product line was introduced (as the metric conversion of the E Series line) it was a best-in-industry choice for workholding.

More information

Sample Solutions. Simply Flexible.

Sample Solutions. Simply Flexible. Sample Solutions Simply Flexible. Efficiency Through Workholding Innovation Chick works to increase productivity by reducing inefficiencies of CNC Machining Centers. We do this simply by applying workholding

More information

5QL1030-AL Qwik-Lok Product Information PRODUCT INFO SYSTEM 5

5QL1030-AL Qwik-Lok Product Information PRODUCT INFO SYSTEM 5 PRODUCT INFO 1030 Qwik-Lok Product Information Revised: 06-NOV-06 Document: 800-0287-0606 Page 1 of 9 SPRE PRTS * T-Wrench: 6mm MTWR10 * * Screwdriver 005-2401 MOUNTING Foundation * Round Plugs: 16mm RNDP-016-RD1-025

More information

5QL1540-AL Qwik-Lok Product Information PRODUCT INFO SYSTEM 5

5QL1540-AL Qwik-Lok Product Information PRODUCT INFO SYSTEM 5 PRODUCT INFO 1540 Qwik-Lok Product Information Revised: 06-NOV-06 Document: 800-0289-0606 Page 1 of 10 SPRE PRTS * T-Wrench: 8mm MTWR15 * * Screwdriver 005-2401 MOUNTING Foundation * Round Plugs: 20mm

More information

THIS WORKHOLDING PACKAGE IS DESIGNED FOR HAAS HRT210 & HRT210SP ROTARY TABLES (ROTARY TABLE NOT INCLUDED WITH PACKAGE) INTRODUCTION

THIS WORKHOLDING PACKAGE IS DESIGNED FOR HAAS HRT210 & HRT210SP ROTARY TABLES (ROTARY TABLE NOT INCLUDED WITH PACKAGE) INTRODUCTION INTRODUCTION THIS WORKHOLDING PCKGE IS DESIGNED FOR HS HRT210 & HRT210SP ROTRY TBLES (ROTRY TBLE NOT INCLUDED WITH PCKGE) PRODUCT INFORMTION PCKET (PIP) FOR WORKHOLDING PCKGE 2/12/2009 1 OF 7 (800) 332-4425

More information

VISES VISES JAWS CENTERING CLAMP BASE PLATE COMPACT PNEUMATIC VISE PAIR OF CLAMPS PAIR OF POSITIONING KEYS PAIR OF POSITIONING KEYS VISES

VISES VISES JAWS CENTERING CLAMP BASE PLATE COMPACT PNEUMATIC VISE PAIR OF CLAMPS PAIR OF POSITIONING KEYS PAIR OF POSITIONING KEYS VISES CENTERING CLAMP JAWS BASE PLATE Part No. CP170 Part No. CP175 Part No. CP179 COMPACT PNEUMATIC VISE Part No. AMLFV-S PAIR OF CLAMPS Part No. MVAC-CS PAIR OF POSITIONING KEYS Part No. MVAC-SK PAIR OF POSITIONING

More information

FLOE quick attach & standard sectional dock and leg kits

FLOE quick attach & standard sectional dock and leg kits FLOE quick attach & standard sectional dock and leg kits assembly instructions KIT P/N 510-02550-00 X-SHALLOW KIT P/N 510-02551-00 SHALLOW KIT P/N 510-02552-00 MEDIUM KIT P/N 510-02553-00 DEEP WARNING

More information

STEVENS SUBPLATES. STEVENS ENGINEERING, INC. TOLL-FREE WEB FAX

STEVENS SUBPLATES. STEVENS ENGINEERING, INC. TOLL-FREE WEB   FAX STEVENS SUBPLATES Spacing of hole patterns on Stevens accessories is identical to the pattern on Stevens Subplates. Insertion of the pull dowels thru bushed holes in the accessory into corresponding bushed

More information

w w w. h d o n l i n e s h o p. d e AUTOMATIC COMPRESSION RELEASE TOOL GENERAL INSTALLATION -J04654 REV Kit Number Models

w w w. h d o n l i n e s h o p. d e AUTOMATIC COMPRESSION RELEASE TOOL GENERAL INSTALLATION -J04654 REV Kit Number Models -J05 REV. 008-0- GENERAL Kit Number 98-08 Models AUTOMATIC COMPRESSION RELEASE TOOL For model fitment information, see the P&A Retail Catalog or the Parts and Accessories section of www.harley-davidson.com

More information

FLOE DOCK FURNITURE WARNING ASSEMBLY INSTRUCTIONS

FLOE DOCK FURNITURE WARNING ASSEMBLY INSTRUCTIONS FLOE DOCK FURNITURE ASSEMBLY INSTRUCTIONS KIT P/N 510-00400-02 KIT P/N 510-00405-02 KIT P/N 510-00406-02 KIT P/N 510-00410-02 WARNING IT IS THE INSTALLER S RESPONSIBILITY TO PROPERLY INSTALL this chair

More information

Flat Panel Stand FPZ-655. for 32" to 55" Flat Panel Screens FEATURES. Reinforced universal adapter plate for a strong hold

Flat Panel Stand FPZ-655. for 32 to 55 Flat Panel Screens FEATURES. Reinforced universal adapter plate for a strong hold FPZ-655 Flat Panel Stand for 32" to 55" Flat Panel Screens For a viewing experience that really stands out, Peerless FPZ-655 Universal Flat Panel Stand for 32" 55" flat panel TVs provides a brilliant combination

More information

w w w. h d o n l i n e s h o p. d e TIMKEN BEARING CONVERSION TOOL GENERAL INSTALLATION -J04672 REV Kit Number Models

w w w. h d o n l i n e s h o p. d e TIMKEN BEARING CONVERSION TOOL GENERAL INSTALLATION -J04672 REV Kit Number Models -J067 REV. 008-07- GENERAL Kit Number 8-08 Models TIMKEN BEARING CONVERSION TOOL For model fitment information, see the P&A Retail Catalog or the Parts and Accessories section of www.harley-davidson.com

More information

Model: SCD430 SCD640. Installation & Operation Guide P/N SCD640-95

Model: SCD430 SCD640. Installation & Operation Guide P/N SCD640-95 Model: SCD430 SCD640 Installation & Operation Guide P/N SCD640-95 Model SCD430 and SCD640 Kurt has two Self-Centering vises, a four-inch jaw width (SCD430) and a six-inch jaw width (SCD640). Jaw opening

More information

Lab Style Table Frame Part No Assembly Guide Automation Technology

Lab Style Table Frame Part No Assembly Guide Automation Technology Ergonomic Workstations Lab Style Table Frame Part No. 8 0 Assembly Guide 7 90 70 Automation Technology SPECIFICATIONS Lab style frame part number... 80 Height... 70 mm (8.") Width... 90 mm (.7") Depth...

More information

Baffle and Shredder Kits

Baffle and Shredder Kits Baffle and Shredder Kits For RC(M)5020 Rotary Cutters Before You Start! When you see this symbol, the subsequent instructions and warnings are serious - follow without exception. Your life and the lives

More information

MC-CVR-1. Király Trading KFT H-1151 Budapest Mogyoród útja

MC-CVR-1. Király Trading KFT H-1151 Budapest Mogyoród útja MC-CVR-1 Király Trading KFT H-11 Budapest Mogyoród útja -14 E-mail:_agi@kiralytrading.hu carver clamp Series Applications C-Style Carver Clamps A djustment screw is shielded and out of the work area Ideal

More information

Universal 5 Axis Vise Positive high strength clamping close to the work-piece Obstruction free 5-axis machining

Universal 5 Axis Vise Positive high strength clamping close to the work-piece Obstruction free 5-axis machining Machining and workholding Universal 5 Axis Vise Positive high strength clamping close to the work-piece Obstruction free 5-axis machining Obstruction free 5-side machining More and more companies are investing

More information

AR15 SUPER SLIM AND ULTRA SLIM FREE FLOAT RAIL SYSTEMS

AR15 SUPER SLIM AND ULTRA SLIM FREE FLOAT RAIL SYSTEMS MUM066011803 AR15 SUPER SLIM AND ULTRA SLIM FREE FLOAT RAIL SYSTEMS Proudly Designed and Made in USA Super Lightweight, Flush Fitting, and Continuous with Flat Top AR15 Upper Receiver Features Integral

More information

RBP-1215B-RX DODGE RAM QUAD CAB RX3

RBP-1215B-RX DODGE RAM QUAD CAB RX3 RBP-1215B-RX3 2002-2017 DODGE RAM 15-3500 QUAD CAB RX3 Passenger side RX-3 Side Step Drill Template Passenger side rear Modular Bracket (6) L Support Brackets Driver side rear Modular Bracket Driver side

More information

IN-30000_F. Installation Instructions

IN-30000_F. Installation Instructions IN-30000_F Installation Instructions Parts Overview Detail A Detail B Detail C Detail A Detail C Detail B Parts List & Tools PARTS ITEM NO. PART NUMBER DESCRIPTION Qty 1 01-30008-01 P/C,DOUBLE T-SLOT CROSSBAR,

More information

DOOR KIT P/N APPLICATION BEFORE YOU BEGIN KIT CONTENTS. Instr Rev Page 1 of 6. Verify accessory fitment at Polaris.com.

DOOR KIT P/N APPLICATION BEFORE YOU BEGIN KIT CONTENTS. Instr Rev Page 1 of 6. Verify accessory fitment at Polaris.com. DOOR KIT P/N 2882528 APPLICATION Verify accessory fitment at Polaris.com. BEFORE YOU BEGIN Read these instructions and check to be sure all parts and tools are accounted for. Please retain these installation

More information

SAFETY PRECAUTIONS GENERAL INFORMATION

SAFETY PRECAUTIONS GENERAL INFORMATION Form No. 102831 SPX Corporation 5885 11th Street Rockford, IL 61109-3699 USA Internet Address: http://www.hytec.com Tech. Services: (800) 477-8326 Fax: (800) 765-8326 Order Entry: (800) 541-1418 Fax: (800)

More information

Big Block Installation Manual For Systems without A/C

Big Block Installation Manual For Systems without A/C Big Block Installation Manual For Systems without A/C Billet Specialties, Inc. 500 Shawmut Ave. La Grange, IL 60526 Tech Line (708) 588-0505 Fax (708) 588-7181 Hardware List For Chevrolet Big Block Tru

More information

CAB END BEDTRAX (SIDE VIEW)

CAB END BEDTRAX (SIDE VIEW) Supplied Hardware: (8-14) 1/4-20 Allen head bolts, (12-18) UHMW mount blocks, (4) D-ring tie downs Tools Needed: Allen head wrench GET TO IT. INSTALLATION INSTRUCTIONS STEP 1. INSERT (2) MOUNT BLOCKS INTO

More information

Please read BOTH these Installation Instructions and the General Instructions before attempting to install or operate this equipment.

Please read BOTH these Installation Instructions and the General Instructions before attempting to install or operate this equipment. Please read BOTH these and the General Instructions before attempting to install or operate this equipment. 1. Blue Ox towing products and accessories are intended to be installed by Blue Ox Dealers who

More information

PRODUC TION VISES. Vises. 5-Axis Production Vises

PRODUC TION VISES. Vises. 5-Axis Production Vises Introduction to Design...104 105 VMC/HMC Solutions...106 107 Ball Lock Mounting System...108 109 Production Vises 4" (100 mm) Production Vises...110 112 6" (150 mm) Production Vises...113 115 Short 6"

More information

HCI Fitness UBE Rehab Table

HCI Fitness UBE Rehab Table HCI Fitness UBE Rehab Table OWNER S MANUAL 220V HealthCare International, Inc. PO Box 1509, Langley, WA 98260 www.hcifitness.com, p.360.321.7090 sales@hcifitness.com SAFETY PRECAUTIONS This product was

More information

Retro Fit Gearbox Mount. Assembly Instructions. Assembly Instructions. Before You Start. General Information. Manual No M

Retro Fit Gearbox Mount. Assembly Instructions. Assembly Instructions. Before You Start. General Information. Manual No M Retro Fit Gearbox Mount Assembly Instructions Treker 4400NT & 4400ST Series Before You Start Assembly Instructions Manual No. 700-372M! When you see this symbol, the subsequent instructions and warnings

More information

model tsa-sa48 Sliding Crosscut Table installation guide

model tsa-sa48 Sliding Crosscut Table installation guide model tsa-sa48 Sliding Crosscut Table installation guide A Note About Color Variations Among Anodized Aluminum Components Congratulations on the purchase of this SawStop Sliding Crosscut Table. We at SawStop

More information

Rear Katerack Installation Instructions

Rear Katerack Installation Instructions Rear Katerack Installation Instructions Ram Promaster City 2015+ Frame Kit Part #: CRC 26-1000-001 V1.0.12.04.18 IMPORTANT INSTALLATION STEPS ARE DENOTED USING A STOP SIGN. THESE STEPS MUST BE PERFORMED

More information

Installation Instructions

Installation Instructions IN-30000_F Installation Instructions TracRac Inc. 994 Jefferson St. FallRiver MA 02721 www.tracrac.com 800-501-1587 Thank you for your purchase of a T-Rac G2 cargo rack from TracRac. TracRac takes great

More information

MODEL T28173/T28174 ROLLER TABLES INSTRUCTIONS

MODEL T28173/T28174 ROLLER TABLES INSTRUCTIONS MODEL T28173/T28174 ROLLER TABLES INSTRUCTIONS FOR MODELS MFD. SINCE 10/17 For questions or help with this product contact Tech Support at (570) 546-9663 or techsupport@grizzly.com Rails Rollers Reversible

More information

Sliding Crosscut Table installation guide

Sliding Crosscut Table installation guide Sliding Crosscut Table installation guide model tsa-sa48 A Note About Color Variations Among Anodized Aluminum Components Congratulations on the purchase of this SawStop Sliding Crosscut Table. We at SawStop

More information

OPERATING INSTRUCTIONS 5-AXIS CLAMPING SYSTEM + ACCESSORIES

OPERATING INSTRUCTIONS 5-AXIS CLAMPING SYSTEM + ACCESSORIES OPERATING INSTRUCTIONS 5-AXIS CLAMPING SYSTEM + ACCESSORIES 1 Contents 1. Introduction 2. Safety instructions and precautions 3 Operating the clamp 3.1 Clamp set up 3.2 Sequence for clamp set up 3.3 Adjusting

More information

BX Toyota Tacoma (Includes Prerunner) Installation Instructions

BX Toyota Tacoma (Includes Prerunner) Installation Instructions Attachment Tab Height: 11.5 Attachment Tab Width: 30.5" Serial Number Please read BOTH these and the General Instructions prior to installing or operating this equipment. 1. Blue Ox towing products and

More information

WARNING Mercedes Benz GL550 4Matic Installation Instructions BX1992. Serial Number

WARNING Mercedes Benz GL550 4Matic Installation Instructions BX1992. Serial Number Please read BOTH these and the General Instructions before attempting to install or operate this equipment. 1. Blue Ox towing products and accessories are intended to be installed by Blue Ox Dealers who

More information

PORTABLE ADJUSTABLE BASKETBALL SYSTEM

PORTABLE ADJUSTABLE BASKETBALL SYSTEM Instruction Manual PORTABLE ADJUSTABLE BASKETBALL SYSTEM P A R T S L I S T 5 1/2 and 8 safe play clearance Item Qty Description Item Qty Description A 1 Portable Base Assembly M 4 1/2 Lock Nut B 2 Front

More information

WARNING Kia Spectra 5 Installation Instructions BX2713. Serial Number

WARNING Kia Spectra 5 Installation Instructions BX2713. Serial Number Please read BOTH these and the General Instructions before attempting to install or operate this equipment. 1. Blue Ox towing products and accessories are intended to be installed by Blue Ox Dealers who

More information

Installation Manual Flat Track Series

Installation Manual Flat Track Series Manual Flat Track Series Contents Safety...1 Parts...2 Hardware.......................................... 2 Tools Required..................................... 4.............................................

More information

Installation Guide Philips IntelliVue MP20/30/40/50/60/70 MX400/450/500/550/600/700/800 M-Series Arm Mounting Kit for Dräger Primus Anesthesia Machine

Installation Guide Philips IntelliVue MP20/30/40/50/60/70 MX400/450/500/550/600/700/800 M-Series Arm Mounting Kit for Dräger Primus Anesthesia Machine 3875 Cypress Drive Petaluma, CA 94954 800.228.2555 707.773.1100 Fax 707.773.1180 www.gcx.com Installation Guide Philips IntelliVue MP20/30/40/50/60/70 MX400/450/500/550/600/700/800 M-Series Arm Mounting

More information

PRODUCTION VISES. Vises. Bock Quick Change Fixturing. 5-Axis Production Vises

PRODUCTION VISES. Vises. Bock Quick Change Fixturing. 5-Axis Production Vises Vises Introduction to Design... 74 75 VMC/HMC Solutions...76 77 Ball Lock Mounting System...78 79 Production Vises 4" (100 mm) Production Vises... 80 81 6" (150 mm) Production Vises...82 83 Self Centering

More information

METRIC BOlTS. Size Grade Torque 8mm ft/lbs. 10mm ft/lbs. 12mm ft/lbs. 14mm ft/lbs. 16mm ft/lbs.

METRIC BOlTS. Size Grade Torque 8mm ft/lbs. 10mm ft/lbs. 12mm ft/lbs. 14mm ft/lbs. 16mm ft/lbs. 8/16 HJ31005,Rev 7 BOlT TORQUE SPECIfICATIONS METRIC BOlTS STANDARD BOlTS Size Grade Torque 5/16 5 18 ft/lbs. 3/8 5 30 ft/lbs. 7/16 5 50 ft/lbs. 1/2 5 75 ft/lbs. 5/8 5 150 ft/lbs. 3/4 5 290 ft/lbs. Size

More information

7141 & NATIONAL POLE VAULT STANDARDS SPECIFICATIONS

7141 & NATIONAL POLE VAULT STANDARDS SPECIFICATIONS SPECIFICATIONS Specifications: This standard has a clamping system and a handle added for ease of operation. The clamping system is above the base pad protectors when in the lowest position and the tightening

More information

Page 1. SureMotion Quick-Start Guide: LARSACC_QS 1st Edition - Revision A 03/15/16. Standard Steel Bolt/Screw Torque Specifications

Page 1. SureMotion Quick-Start Guide: LARSACC_QS 1st Edition - Revision A 03/15/16. Standard Steel Bolt/Screw Torque Specifications R K C T I Repair Kit Product Compatibility Repair Kit # Linear Actuator Assembly # LARSACC-013 LARSACC-014 LARSD2-08T12BP2C (12-in travel) LARSD2-08T24BP2C (24-in travel) C P I R K 1 ea Ball Screw with

More information

SC Spare parts list. Hydraulic steel cutter. SC 3600 s/n DEQ Construction Tools GmbH No

SC Spare parts list. Hydraulic steel cutter. SC 3600 s/n DEQ Construction Tools GmbH No SC 3600 Spare parts list Hydraulic steel cutter SC 3600 s/n DEQ169166-2018 Construction Tools GmbH No. 3390788601 2018-05-09 General information This spare parts list applies to the following: Part number

More information

GEARGRID Seattle / SCUBA Storage System

GEARGRID Seattle / SCUBA Storage System GEARGRID Seattle / SCUBA Storage System Assembly Instructions & Owners Manual Thank you for choosing the Geargrid Seattle / SCUBA Storage System. Geargrid is committed to high-quality products and your

More information

ALUMINUM POLE VAULT STANDARDS SPECIFICATIONS

ALUMINUM POLE VAULT STANDARDS SPECIFICATIONS SPECIFICATIONS Specifications: All aluminum construction for superior corrosion resistance. Dual height scales provide English and Metric measurements ranging from 7' to 8'. Wide stance base for improved

More information

TOOLING COMPONENTS. Clamping Kits Step Blocks & Kits Driver Studs Bolts, Screws Nuts, Washers...

TOOLING COMPONENTS. Clamping Kits Step Blocks & Kits Driver Studs Bolts, Screws Nuts, Washers... TOOLING COMPONENTS Clamping Kits... 2-5 Step Blocks & Kits... 6-7 Driver Studs... 8-12 Bolts, Screws... 13-19 Nuts, Washers... 20-29 Clamps... 30-43 Swivel Screw Clamps... 44-46 Screws... 47-48 Hand Knobs...49

More information

EllisSaw.com. EllisSaw.com P.O. Box Verona, WI

EllisSaw.com. EllisSaw.com P.O. Box Verona, WI P.O. Box 9019 Verona, WI 9-019 GENERAL OPERATING & SAFETY INSTRUCTIONS * READ INSTRUCTIONS BEFORE USE * CAUTION: Disconnect power supply cord from power source when doing repair work or changing belt.

More information

5" MULTI-JAW BENCH VISE

5 MULTI-JAW BENCH VISE Operator's Manual 5" MULTI-JAW BENCH VISE Model No. 35.5 8580 CAUTION: Read and follow all Safety Rules and Operating Instructions before First Use of this Product. Safety Assembly Operation Maintenance

More information

General Safety and Maintenance Manual

General Safety and Maintenance Manual General Safety and Maintenance Manual 3 H.P HORIZONTAL GRINDERS CAPACITY -6 Inch (150 mm) or 8 Inch (200 mm) Type 1 Wheels -Any Type 16, 17, 17R, 18 or 18R Cone Wheels w/ 5/8-11 Mounting 3 H.P HORIZONTAL

More information

Assembly & Disassembly Guide

Assembly & Disassembly Guide Carvable Jaw Block Assembly & Disassembly Guide quincy\prod. Setup info\jawkits\jawkit setup guide P/N CARV-95, REV C 02/18/03 Index: Page Revision History... 1 Sec. Carvlock/ Fixture Vise 1.0 Jaw Block

More information

Operating Instructions and Parts Manual. 10 x 16 Horizontal Band Saw Models J-7020, J-7040

Operating Instructions and Parts Manual. 10 x 16 Horizontal Band Saw Models J-7020, J-7040 Operating Instructions and Parts Manual 10 x 16 Horizontal Band Saw Models J-7020, J-7040 JET 427 New Sanford Road LaVergne, Tennessee 37086 Part No. M-414472 Ph.: 800-274-6848 Revision C2 03/2014 www.jettools.com

More information

Wooden Frame Type Instruction Manual

Wooden Frame Type Instruction Manual Wooden Frame TypeInstruction Manual Thank you for selecting our product. Before starting installation, please read this manual thoroughly to ensure correct installation. Please keep this manual at hand

More information

Please read BOTH these Installation Instructions and the General Instructions before attempting to install or operate this equipment.

Please read BOTH these Installation Instructions and the General Instructions before attempting to install or operate this equipment. Please read BOTH these and the General Instructions before attempting to install or operate this equipment. 1. Blue Ox towing products and accessories are intended to be installed by Blue Ox Dealers who

More information

Installation and Assembly - Universal Articulating Swivel Double-Arm for 42" - 60" Plasma Screens

Installation and Assembly - Universal Articulating Swivel Double-Arm for 42 - 60 Plasma Screens Installation and Assembly - Universal Articulating Swivel Double-Arm for 42" - 60" Plasma Screens Models: PLAV 70-UNL, PLAV 70-UNL-S PLAV 70-UNLP, PLAV 70-UNLP-S R This product is UL Listed. It must be

More information

Panels, Panel Mounting & Other Accessories

Panels, Panel Mounting & Other Accessories Panels, Panel Mounting & Other Accessories Wire mesh guarding on assembly conveyor line Machine safety enclosure using Lexan panels 108 Multiblock Al 1-105 1-3 Various fastening options for panels on Multiblock

More information

Installation instructions for FC17 Forward Controls for Triumph Rocket III Roadster

Installation instructions for FC17 Forward Controls for Triumph Rocket III Roadster Installation instructions for FC17 Forward Controls for Triumph Rocket III Roadster It is highly recommended that you use a thread lock compound such as Loctite brand on all threads to keep them from vibrating

More information

SPARE PARTS LIST MODEL NO. LB1200F PAGE 1 ITEM PART NO. DESCRIPTION QTY NOTE

SPARE PARTS LIST MODEL NO. LB1200F PAGE 1 ITEM PART NO. DESCRIPTION QTY NOTE PAGE 1 001 JM21000018 HEX.SOCKET HEAD SCREW M5X12 4 002 JM21000019 SPRING WASHER 5 4 003 JM21000020 FLAT WASHER 5 4 004 JM21000021 UP COVER COMPLETE 1 005 JM21000025 MICRO SWITCH FIX PANEL A 1 006 JM21000026

More information

Maintenance & Parts list for:

Maintenance & Parts list for: Maintenance & Parts list for: Industrial gun GB 2 Juni 2017 This Maintenance & Parts list for industrial gun is prepared by : Winchester Europe Service V. Parbst & Søn as a comprehensive maintenance guide

More information

KURT D810 AngLock Vise Base Assembly

KURT D810 AngLock Vise Base Assembly KURT MANUFACUTRING - LIFETIME IRONCLAD TM WARRANTY All Kurt Manufacturing Company industrial workholding products and parts with the exceptions noted below, are warranted against defects in material and

More information

TECHNICAL INFORMATION Models No.

TECHNICAL INFORMATION Models No. TECHNICAL INFORMATION Models. Description 6207D, 6217D, 6237D,, 9.6V, 12V, 14.4V Cordless Driver Drills 10mm (3/8") 12V, 14.4V, 18V Cordless Driver Drills 13mm (1/2") CONCEPT AND MAIN APPLICATIONS These

More information

KIT ASSEMBLY INSTRUCTIONS

KIT ASSEMBLY INSTRUCTIONS JUMPING JACK TRAILER KIT KIT ASSEMBLY INSTRUCTIONS A torque wrench (provided in the in-store tool kit) is required to assemble this trailer kit. Torque is a twisting (ft.-lb.).copy force measured in foot-pounds

More information

Kwik-Lock. Installation Instructions. Attention Dealers: Please give this owners manual to the customer when the product is delivered.

Kwik-Lock. Installation Instructions. Attention Dealers: Please give this owners manual to the customer when the product is delivered. Serving the Truck & Trailer Industry Since 1944 Installation Instructions Attention Dealers: Please give this owners manual to the customer when the product is delivered. Call 800-535-9545 www.aeroindustries.com

More information

Double Locating Fixed Vise w/.500 locating holes. Adjustable Vise w/.500 locating holes

Double Locating Fixed Vise w/.500 locating holes. Adjustable Vise w/.500 locating holes VISES VISES EZE-VISE TM MODULAR SETUPS Low profile, low cost modular vise set incorporates features found in higher priced products: positive location in 3-axes, raised locator surface to facilitate drilling

More information

Please read BOTH these Installation Instructions and the General Instructions prior to installing or operating this equipment.

Please read BOTH these Installation Instructions and the General Instructions prior to installing or operating this equipment. Attachment Tab Height: 14-1/2 Serial Number Attachment Tab Width: 24 Please read BOTH these and the General Instructions prior to installing or operating this equipment. 1. Blue Ox towing products and

More information

Classic Roll Tarp. Installation Instructions. Attention Dealers: Please give this owners manual to the customer when the product is delivered.

Classic Roll Tarp. Installation Instructions. Attention Dealers: Please give this owners manual to the customer when the product is delivered. Serving the Truck & Trailer Industry Since 1944 Classic Roll Tarp Attention Dealers: Please give this owners manual to the customer when the product is delivered. Call 800-535-9545 www.aeroindustries.com

More information

INSTALLATION MANUAL FRONT. See pages 2 and 3 of this manual for configuration options. Level of Difficulty. Product Photo (center section only)

INSTALLATION MANUAL FRONT. See pages 2 and 3 of this manual for configuration options. Level of Difficulty. Product Photo (center section only) INSTALLATION MANUAL FRONT Level of Difficulty Moderate Product Photo (center section only) All hardware listed below will be provided with the bumpers center section. Additional hardware will be supplied

More information

WARNING. Baseplates Honda Accord. Installation Instructions BX2229. Serial Number. (Including LX, EX, DX)

WARNING. Baseplates Honda Accord. Installation Instructions BX2229. Serial Number. (Including LX, EX, DX) Baseplates Serial Number Attachment Tab Height: 14 Attachment Tab Width: 24 Please read BOTH these Installation Instructions and the General Instructions before attempting to install or operate this equipment.

More information

2014 / Universal 5 Axis Vise Positive high strength clamping close to the work-piece Obstruction free 5-axis machining

2014 / Universal 5 Axis Vise Positive high strength clamping close to the work-piece Obstruction free 5-axis machining 21 / 215 Vischer & Bolli Machining and workholding Universal 5 Axis Vise Positive high strength clamping close to the work-piece Obstruction free 5-axis machining Obstruction free 5-side machining More

More information

AR-15 Armorer s Essentials Kit. Product # Instructions # Revision: B

AR-15 Armorer s Essentials Kit. Product # Instructions # Revision: B AR-15 Armorer s Essentials Kit Product #156111 Instructions #1025769 Revision: B 1 INDEX 3 AR-15 Adjustable Receiver Link 3 Pivot Pin and Roll Pin Installation Tool 4 Mag well Vise Block 7 Upper Vise Block

More information

Installation and Assembly - Universal Articulating Swivel Double-Arm for 42" - 60" Plasma Screens

Installation and Assembly - Universal Articulating Swivel Double-Arm for 42 - 60 Plasma Screens Installation and Assembly - Universal Articulating Swivel Double-Arm for 42" - 60" Plasma Screens Models: PLAV 70-UNL, PLAV 70-UNL-S PLAV 70-UNLP, PLAV 70-UNLP-S R This product is UL Listed. It must be

More information

WARNING. B as e plate s. BX Saturn L Series Installation Instructions. Serial Number

WARNING. B as e plate s. BX Saturn L Series Installation Instructions. Serial Number B as e plate s BX3323 Please read BOTH these and the General Instructions before attempting to install or operate this equipment. Serial Number 1. Blue Ox towing products and accessories are intended to

More information

08+ KAWASAKI KLR PD NERF

08+ KAWASAKI KLR PD NERF 08+ KAWASAKI KLR PD NERF 0505-1299 Before you begin, place the bike on a hard level surface where you have room to work. Lay out the parts included in this kit and compare to the parts list on page 5 of

More information

GENUINE PARTS INSTALLATION INSTRUCTIONS

GENUINE PARTS INSTALLATION INSTRUCTIONS GENUINE PARTS INSTALLATION INSTRUCTIONS DESCRIPTION: APPLICATION: PART NUMBER: Fifth Wheel Adapter Titan 999T5 W4198 KIT CONTENTS: Item Qty. Part Description Service Part Number A 1 Fifth Wheel Adapter

More information

MITCHELL WREATH RINGS NO-HAMMER ASSEMBLY INSTRUCTIONS

MITCHELL WREATH RINGS NO-HAMMER ASSEMBLY INSTRUCTIONS MITCHELL WREATH RINGS NO-HAMMER ASSEMBLY INSTRUCTIONS METAL STAND WITH WOOD STAND WITH PAGE 2 OF 10 MASTER PARTS LIST HEAD ASSEMBLY LINKAGE ASSEMBLY HOOK LEVER ASSEMBLY FOOT PEDAL ASSEMBLY ALL FASTENERS

More information

WARNING. BX Chevy Cruze LS/1LT/2LT/LTZ. (Includes Fog Lights) Installation Instructions

WARNING. BX Chevy Cruze LS/1LT/2LT/LTZ. (Includes Fog Lights) Installation Instructions Attachment Tab Height: 14-1/4 Serial Number Attachment Tab Width: 20 Please read BOTH these and the General Instructions prior to installing or operating this equipment. 1. Blue Ox towing products and

More information

Please read BOTH these Installation Instructions and the General Instructions before attempting to install or operate this equipment.

Please read BOTH these Installation Instructions and the General Instructions before attempting to install or operate this equipment. Please read BOTH these and the General Instructions before attempting to install or operate this equipment. 1. Blue Ox towing products and accessories are intended to be installed by Blue Ox Dealers who

More information

Please read BOTH these Installation Instructions and the General Towing Instructions before attempting to install or operate this equipment.

Please read BOTH these Installation Instructions and the General Towing Instructions before attempting to install or operate this equipment. Serial Number BX3785 Please read BOTH these and the General Towing Instructions before attempting to install or operate this equipment. 1. Blue Ox towing products and accessories are intended to be installed

More information

EKX Full-Range Loudspeaker Accessories

EKX Full-Range Loudspeaker Accessories EKX Full-Range Loudspeaker Accessories EKX-BRKT12, EKX-BRKT15, and EKX-TCA en Installation Note en 3 Table of contents 1 Safety 4 1.1 Safety point 6 2 Installation 7 2.1 Wall mount bracket 7 2.2 Truss

More information

DYNATRAC BALL JOINT REBUILD INSTRUCTIONS V4.0

DYNATRAC BALL JOINT REBUILD INSTRUCTIONS V4.0 DYNATRAC PRODUCTS 2007-2016 4X4 JEEP JK HEAVY DUTY BALL JOINT JP44-2X3050-C DYNATRAC BALL JOINT REBUILD INSTRUCTIONS V4.0 WARNING: Improper use or installation of this product can cause major failures

More information

Save Set-up Time... and More!

Save Set-up Time... and More! System Bock Save Set-up Time... and More! Bock Locator Plates The foundation for quick change workholding efficiency. The Bock Locator Plate is a hard coated aluminium subplate with precision bored and

More information

Installation and Assembly: Flat Video Wall Mount For 40" to 65" Flat Panel Displays

Installation and Assembly: Flat Video Wall Mount For 40 to 65 Flat Panel Displays Installation and Assembly: Flat Video Wall Mount For 40" to 65" Flat Panel Displays Model: DS-VW665 Maximum Load Capacity: 125 lb (57 kg) 1 of 11 ISSUED: 03-22-12 SHEET #: 125-9288-4 06-25-13 NOTE: Read

More information

Swivel Hoist Ring RIGGING ACCESSORIES. Color coded to distinguish between UNC (Red) and Metric (Silver) thread types.

Swivel Hoist Ring RIGGING ACCESSORIES. Color coded to distinguish between UNC (Red) and Metric (Silver) thread types. RIGGING ACCESSORIES Color coded to distinguish between UNC (Red) and Metric (Silver) thread types. Available in UNC and Metric thread sizes. UNC threads available in sizes from 800 pounds to 100,000 pounds,

More information

Self-Centering Vise. Owner s Manual. Operating Instructions. Care & Maintenance. Warranty Information

Self-Centering Vise. Owner s Manual. Operating Instructions. Care & Maintenance. Warranty Information Self-Centering Vise Owner s Manual Operating Instructions Care & Maintenance Warranty Information Recommended Torque Specifications V00 Maximum Torque for Vise Assembly: ft lbs (.0 Nm) Maximum Torque for

More information

WARNING BX Dodge Ram 1500 (2/4WD, Include Sport, No Mega Cab) 2008 Dodge Ram 1500 Quad St/Slt Installation Instructions.

WARNING BX Dodge Ram 1500 (2/4WD, Include Sport, No Mega Cab) 2008 Dodge Ram 1500 Quad St/Slt Installation Instructions. Please read BOTH these and the General Instructions before attempting to install or operate this equipment. 1. Blue Ox towing products and accessories are intended to be installed by Blue Ox Dealers who

More information

WARNING Acura TSX Installation Instructions. B as e plate s BX1012. Serial Number

WARNING Acura TSX Installation Instructions. B as e plate s BX1012. Serial Number B as e plate s BX1012 Please read BOTH these and the General Instructions before attempting to install or operate this equipment. Serial Number 1. Blue Ox towing products and accessories are intended to

More information

MODEL T10050 RIGHT ANGLE IRON BENDER INSTRUCTIONS

MODEL T10050 RIGHT ANGLE IRON BENDER INSTRUCTIONS MODEL T10050 RIGHT ANGLE IRON BENDER INSTRUCTIONS Damage to your eyes, face, and hands could result from using this item without proper protective gear, such as safety glasses or a face shield, and gloves.

More information

Customer Notice: Congratulations again on your SawStop purchase, and thank you! -SawStop Tualatin, OR

Customer Notice: Congratulations again on your SawStop purchase, and thank you! -SawStop Tualatin, OR Customer Notice: Congratulations on the purchase of this Sliding Crosscut Attachment. As the owner of a SawStop saw, you are familiar with our high standards for quality, fit and finish. Different from

More information

JARVIS. Model25CL-4,5,6 Hock Cutter and Loin Dropper. 25CL--5 Front Legs and Horns. 25CL--4 Hind Legs and Horns. 25CL--6 Loins

JARVIS. Model25CL-4,5,6 Hock Cutter and Loin Dropper. 25CL--5 Front Legs and Horns. 25CL--4 Hind Legs and Horns. 25CL--6 Loins Model25CL-4,5,6 Hock Cutter and Loin Dropper 25CL--4 Hind Legs and Horns 25CL--5 Front Legs and Horns 25CL--6 Loins EQUIPMENT SELECTION... Ordering No. TABLE OF CONTENTS... Page 25CL--4... 4025007 25CL--5...

More information

INSTALLATION INSTRUCTION RRU DOUBLE LIGHT POLE MOUNT

INSTALLATION INSTRUCTION RRU DOUBLE LIGHT POLE MOUNT INSTALLATION INSTRUCTION RRU Double Light Pole Mount for installation of two RRU units on mast, towers or other vertical structures. CUE DEE YOUR INNOVATIVE PARTNER 1 CONTENTS 1. PRODUCT COVERED IN THIS

More information

Please read BOTH these Installation Instructions and the General Towing Instructions before attempting to install or operate this equipment.

Please read BOTH these Installation Instructions and the General Towing Instructions before attempting to install or operate this equipment. Serial Number Please read BOTH these and the General Towing Instructions before attempting to install or operate this equipment. 1. Blue Ox towing products and accessories are intended to be installed

More information

DO35 MAINTENANCE INSTRUCTIONS

DO35 MAINTENANCE INSTRUCTIONS CUSTOMER INFORMATION SHEET NO. 038 DO35 MAINTENANCE INSTRUCTIONS (DO35 V3 LAUNCHED PRODUCTION JUNE 2017) Table of Contents 1.0 Replacing Spindle Bushes V3... 22 2.0 Replacing Locking Mechanism V3... 6

More information

General Safety and Maintenance Manual

General Safety and Maintenance Manual General Safety and Maintenance Manual 4 H.P HORIZONTAL GRINDERS CAPACITY -6 Inch (150 mm) or 8 Inch (200 mm) Type 1 Wheels -Any Type 16, 17, 17R, 18 or 18R Cone Wheels w/ 5/8-11 Mounting 65H Series 4 H.P

More information

INSTALLATION INSTRUCTIONS Small Flat Panel Mounts Model: F-Series

INSTALLATION INSTRUCTIONS Small Flat Panel Mounts Model: F-Series INSTALLATION INSTRUCTIONS Small Flat Panel Mounts Model: F-Series This Instruction Manual covers most of the F-Series wall and desk mounts, as well as selected F-Series pole mounts. NOTE: Some F-Series

More information

ASSEMBLY AND CARE INSTRUCTIONS JUST FOR KIDS 355

ASSEMBLY AND CARE INSTRUCTIONS JUST FOR KIDS 355 ASSEMBLY AND CARE INSTRUCTIONS VERSION: 8920100 (Revised 06/16) JUST FOR KIDS 355 SALES AND SERVICE spiethamerica.com Canada and International 135 Forestview Road, PO Box 40 Orillia, Ontario, Canada L3V

More information

Tail Vise. Installation Instructions. (revised 10/11/2017)

Tail Vise. Installation Instructions. (revised 10/11/2017) Tail Vise Installation Instructions (revised 10/11/2017) Lie-Nielsen Tail Vise Instructions Table of Contents page About Your Tail Vise 3 Parts List 4 step 1. Prepare Your Bench Top 5 step 2. Prepare the

More information